Search Results

Search found 7706 results on 309 pages for 'checked'.

Page 23/309 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

  • Random “Lost connection to MySQL server at 'reading initial communication packet', system error: 0”

    - by user1606545
    Sometimes I get the error from MYSQL server: Lost connection to MySQL server at 'reading initial communication packet', system error: 0 I cannot find the cause, since most of the time it works, but every week for some hours I get this error. I googled, but there seem to be only users which have this error permanently. But in this case, it only occurs sometimes. I checked hosts.allow and hosts.deny, but the host is allowed and not denied. Also sometimes I get the error: File './database/table.MYD' not found (Errcode: 24) It occurs very rarely. But it occurs for some hours once a week, sometimes on multiple days, but suddenly the problem disappears again. I have checked the open files limit. It's 2048 and should be absolutely enough. I also tried to increase the number of open files nevertheless, but no effect. I thought, perhaps the process does not close some tables. But this is impossible, because after a while everythings o.k. again and the process opens maximum 100 tables at once. I also checked the MySQL-runtime-environment, and there were 930 opened files. I cannot explain that. After a while it's 129. I am running a MySQL-Server on a SUSE-Linux machine. I connect to the MySQL-Server from another host by the command line tool "mysql" and by MySQL-C-connector. The MySQL-Server is version 5.0.67.

    Read the article

  • Laptop CPU fan not working properly

    - by Smith
    My laptop's CPU fan is suddenly acting very bizarre, and I am at a loss for what to do so I am asking for some help. Specifically, the fan is not even starting to spin until the CPU reaches 60 degrees Celsius (checked through HWmonitor). Once it is on, however, it properly stays on even when the CPU gets back to idle temps around 38 Celsius. Before, the fan was simply starting with the computer and staying on like normal. I've checked this for consistency both by allowing cold boots to ramp up temperature to 60 Celsius (the slow climb also causing the laptop to become unreasonably warm near the heatsink), and also running Prime95 immediately to kickstart the fan (this works every time). The fan seems to be stationary when turning the computer on from either sleep or shutdown. The fan will start at POST very briefly, and then stop completely. I've checked the BIOS for a SmartFan setting but haven't found any. I've opened the case to check for dust or debris and have not found anything (I applied some canned air to the area just in case). The laptop is a Lenovo ThinkPad Edge E430 and the CPU is an Intel Core i5 3210m @ 2.5 GHz. Any advice would really be appreciated.

    Read the article

  • Windows 7, enabeling IE for removal

    - by Thew
    For a while now, Windows Update has been prompting me to update IE9 to IE10. And every time I turn off my PC, It starts to install that one update wich allways fails. Why does it fail updating IE9? I don't know. So the solution I had in my mind was to remove IE9 and then install IE10 manually. THe problem is now, I can't find the uninstall file for IE9. I have looked in windows control panel / programs and features but it didn't show up, not even in the installed updates section. So after I clicked on Turn windows features on or off, I saw that the IE9 box wasn't checked. So I checked it, clicked OK, but then when I clicked on the Turn windows features on or off link again, it wasn't checked anymore. It's almost like Windows doesn't want me to uninstall IE9. but I have to in order to normally shut down my pc, because everytime I shut my PC off, it tries to install that stupid update again! What can I do to solve this?

    Read the article

  • How to find the reason for a weekly downtime on an Ubuntu web server hosted by AWS?

    - by IceSheep
    We started monitoring our web server using Pingdom and found out that we have a downtime of a few minutes every Sunday at 0:00 UTC. The test runs every minute and checks if a successful HTTP response (code 200) is returned on port 80. The test fails due to a timeout (no response after 30 seconds). Here's what we've already checked – without success: Since we run our webserver behind a load balancer, I've set the Pingdom test on the load balancer's public DNS and the webserver's public DNS in order to find out if there's a problem with the AWS load balancer – both tests return the same result We set up Munin on our webserver. Everything looked fine even after the failure. Since the last failure lasted only 2 minutes I suppose Munin couldn't capture a potential problem (it only checks every 5 minutes) I have checked /var/log/apache2/error.log and /var/log/syslog for suspicious entries I have checked /etc/cron.weekly and /etc/crontab for suspicious entries I have searched for files created or last-modified during 0:00 and 0:15 using this method: touch -t 201209020000 start touch -t 201209020015 end find / -newer start -and ! -newer end (nothing found) Has anybody experienced a similar problem? Any proposals on how to find the reason for this behavior? It's Ubuntu 10.04 LTS running on an AWS m1.large instance. Thanks!

    Read the article

  • RegisterRequiresControlState can only be called before and during PreRender.

    - by user203127
    Hi When i am trying to export data from gridview to excelML I am getting error like RegisterRequiresControlState can only be called before and during PreRender. I dont know why it is happening. Please help me to sove this issue. Here is my sample code. I didnt implement any prerender method in my code. If i need to implement what should i write in that. protected void Button4_Click(object sender, System.EventArgs e) { ConfigureExport(); RadGrid1.ExportSettings.Excel.Format = Telerik.Web.UI.GridExcelExportFormat.ExcelML; CheckBox1.Checked = true; RadGrid1.ExportSettings.ExportOnlyData = true; RadGrid1.MasterTableView.ExportToExcel(); } public void ConfigureExport() { RadGrid1.ExportSettings.ExportOnlyData = CheckBox1.Checked; RadGrid1.ExportSettings.IgnorePaging = CheckBox2.Checked; RadGrid1.ExportSettings.OpenInNewWindow = CheckBox3.Checked; } protected void RadGrid1_ExcelMLExportRowCreated(object source, Telerik.Web.UI.GridExcelBuilder.GridExportExcelMLRowCreatedArgs e) { if (e.RowType == Telerik.Web.UI.GridExcelBuilder.GridExportExcelMLRowType.DataRow) { if (e.Row.Cells[0] != null && ((string)e.Row.Cells[0].Data.DataItem).Contains("U")) { e.Row.Cells[0].StyleValue = "MyCustomStyle"; e.Worksheet.Name = "comcast"; } } } protected void RadGrid1_ExcelMLExportStylesCreated(object source, Telerik.Web.UI.GridExcelBuilder.GridExportExcelMLStyleCreatedArgs e) { foreach (Telerik.Web.UI.GridExcelBuilder.StyleElement style in e.Styles) { if (style.Id == "headerStyle") { style.FontStyle.Bold = true; style.FontStyle.Color = System.Drawing.Color.Gainsboro; style.InteriorStyle.Color = System.Drawing.Color.Wheat; style.InteriorStyle.Pattern = Telerik.Web.UI.GridExcelBuilder.InteriorPatternType.Solid; } else if (style.Id == "itemStyle") { style.InteriorStyle.Color = System.Drawing.Color.WhiteSmoke; style.InteriorStyle.Pattern = Telerik.Web.UI.GridExcelBuilder.InteriorPatternType.Solid; } else if (style.Id == "alternatingItemStyle") { style.InteriorStyle.Color = System.Drawing.Color.LightGray; style.InteriorStyle.Pattern = Telerik.Web.UI.GridExcelBuilder.InteriorPatternType.Solid; } } Telerik.Web.UI.GridExcelBuilder.StyleElement myStyle = new Telerik.Web.UI.GridExcelBuilder.StyleElement("MyCustomStyle"); myStyle.FontStyle.Bold = true; myStyle.FontStyle.Italic = true; myStyle.InteriorStyle.Color = System.Drawing.Color.Gray; myStyle.InteriorStyle.Pattern = Telerik.Web.UI.GridExcelBuilder.InteriorPatternType.Solid; e.Styles.Add(myStyle); }

    Read the article

  • [inno setup] Pascal and Delphi Syntax Error?!

    - by neo-nant
    This is the code section from inno setup.My intention is to make two Checkbox where at a time one is being selected. But this code return error. [code] section: procedure CheckBoxOnClick(Sender: TObject); var Box2,CheckBox: TNewCheckBox; begin if CheckBox.Checked then CheckBox.State := cbUnchecked; Box2.State := cbChecked; else //THIS LINE RETURNS AN ERROR: "Identifier Expected." CheckBox.State := cbChecked; Box2.State := cbUnchecked; end; procedure Box2OnClick(Sender: TObject); var Box2,CheckBox: TNewCheckBox; begin if Box2.Checked then CheckBox.State := cbChecked; Box2.State := cbUnchecked; else //same error CheckBox.State := cbUnchecked; Box2.State := cbChecked; end; procedure CreateTheWizardPages; var Page: TWizardPage; Box2,CheckBox: TNewCheckBox; begin { TButton and others } Page := CreateCustomPage(wpWelcome, '', ''); CheckBox := TNewCheckBox.Create(Page); CheckBox.Top :=ScaleY(8)+ScaleX(50); CheckBox.Width := Page.SurfaceWidth; CheckBox.Height := ScaleY(17); CheckBox.Caption := 'Do this'; CheckBox.Checked := True; CheckBox.OnClick := @CheckBoxOnClick; CheckBox.Parent := Page.Surface; Box2 := TNewCheckBox.Create(Page); Box2.Top :=ScaleY(8)+ScaleX(70); Box2.Width := Page.SurfaceWidth; Box2.Height := ScaleY(17); Box2.Caption := 'No,Thanks.'; Box2.Checked := False; Box2.OnClick := @Box2OnClick; Box2.Parent := Page.Surface; end; procedure InitializeWizard(); //var begin { Custom wizard pages } CreateTheWizardPages; end; Please tell me where to change..

    Read the article

  • Check if Checkbox is checkd?

    - by streetparade
    Im trying to get some checkbox with a specific name document.getElementsByName("test"); Unfortunatley i cant check if it is checked or not here is the code for(i=0;i<check.length;i++) { if(check[i].checked==true) { alert(check[i].value); } } Is somewhere a typo?

    Read the article

  • Forms Authentication logs out very quickly , locally works fine !!!

    - by user319075
    Hello to all, There's a problem that i am facing with my hosting company, I use a project that uses FormsAuthentication and the problem is that though it successfully logs in, it logs out VERY QUICKLY, and i don't know what could be the cause of that, so in my web.config file i added those lines: <authentication mode="Forms" > <forms name="Nadim" loginUrl="Login.aspx" defaultUrl="Default.aspx" protection="All" path="/" requireSSL="false"/> </authentication> <authorization> <deny users ="?" /> </authorization> <sessionState mode="StateServer" stateConnectionString="tcpip=localhost:42424" cookieless="false" timeout="1440"> </sessionState> and this is the code i use in my custom login page : protected void PasswordCustomValidator_ServerValidate(object source, ServerValidateEventArgs args) { try { UsersSqlDataSource.SelectParameters.Clear(); UsersSqlDataSource.SelectCommand = "Select * From Admins Where AdminID='" + IDTextBox.Text + "' and Password='" + PassTextBox.Text + "'"; UsersSqlDataSource.SelectCommandType = SqlDataSourceCommandType.Text; UsersSqlDataSource.DataSourceMode = SqlDataSourceMode.DataReader; reader = (SqlDataReader)UsersSqlDataSource.Select(DataSourceSelectArguments.Empty); if (reader.HasRows) { reader.Read(); if (RememberCheckBox.Checked == true) Page.Response.Cookies["Admin"].Expires = DateTime.Now.AddDays(5); args.IsValid = true; string userData = "ApplicationSpecific data for this user."; FormsAuthenticationTicket ticket1 = new FormsAuthenticationTicket(1, IDTextBox.Text, System.DateTime.Now, System.DateTime.Now.AddMinutes(30), true, userData, FormsAuthentication.FormsCookiePath); string encTicket = FormsAuthentication.Encrypt(ticket1); Response.Cookies.Add(new HttpCookie(FormsAuthentication.FormsCookieName, encTicket)); Response.Redirect(FormsAuthentication.GetRedirectUrl(IDTextBox.Text, RememberCheckBox.Checked)); //FormsAuthentication.RedirectFromLoginPage(IDTextBox.Text, RememberCheckBox.Checked); } else args.IsValid = false; } catch (SqlException ex) { ErrorLabel.Text = ex.Message; } catch (InvalidOperationException) { args.IsValid = false; } catch (Exception ex) { ErrorLabel.Text = ex.Message; } Also you will find that line of code: FormsAuthentication.RedirectFromLoginPage(IDTextBox.Text, RememberCheckBox.Checked); is commented because i thought there might be something wrong with the ticket when i log in , so i created it manually , every thing i know i tried but nothing worked, so does anyone have any idea what is the problem ? Thanks in advance, Baher.

    Read the article

  • I'm having trouble setting up pylint with pydev.

    - by Kugel
    I have installed pylint via easy_install. I can run lint.py <filename> with success. But pydev refuses to use it. I checked "use pylint" I configured correct path I updated my python interpreter in eclipse to have pylit in pythonpath I use Eclipse Galileo I have build automatically checked I tried cleaning whole project and no errors What am I doing wrong?

    Read the article

  • VB.NET: how to require CheckedListBox to have at least one item selected in WinForms

    - by Craig Johnston
    With the CheckListBox in VB.NET in VS2005, how would you make it compulsory that at least one item is selected? Can you select one of the items at design time to make it the default? EDIT: How can I make it so the last item the user tries to uncheck is the one that stays checked? So it's like the user tries to uncheck the only checked item but can't because it checks back straightaway.

    Read the article

  • When to address integer overflow in C

    - by Yktula
    Related question: http://stackoverflow.com/questions/199333/best-way-to-detect-integer-overflow-in-c-c In C code, should integer overflow be addressed whenever integers are added? It seems like pointers and array indexes should be checked at all. When should integer overflow be checked for? When numbers are added in C without type explicitly mentioned, or printed with printf, when will overflow occur? Is there a way to automatically detect when an integer arithmetic overflow?

    Read the article

  • Very dumb question about IntelliJ IDEA

    - by Alex R
    I'm a long-time Eclipse user and I just now decided to try IntelliJ IDEA 9 (free edition) for Scala. A couple of dumb questions: How can I tell if a file I've modified has been saved? How can I tell if I file I've saved has been checked into CVS? I feel incredibly "exposed" to some sort of imminent danger when I don't see the familiar visual cues from Eclipse that indicate a file has been saved and/or checked in. Thanks

    Read the article

  • select one checkbox from multiple MAIN Checkboxes,disable all other MAIN boxes,n enable child checkbox

    - by harshil
    <input type="checkbox" id="chkMain" /> <input type="checkbox" id="chkMain1" /> <input type="checkbox" id="chkMain2" /> <input class="child" type="checkbox" id="chk1" disabled="true" /> <input class="child" type="checkbox" id="chk2" disabled="true" /> <input class="child" type="checkbox" id="chk3" disabled="true" /> <input class="child" type="checkbox" id="chk4" disabled="true" /> <input class="child" type="checkbox" id="chk5" disabled="true" /> <input class="child" type="checkbox" id="chk6" disabled="true" /> <input class="child" type="checkbox" id="chk7" disabled="true" /> $(function(){ $("input[id^=chkMain]").click ( function() { if( !$(this).is ( ":checked" ) ){ $(".child").attr ( "disabled" , true ); } else{ $(".child").removeAttr ( "disabled" ); } }); }); this enables all the child boxes when either chkMain or chkMain1 or chkMain2 are checked. what i want is: when chkMain is checked the code should disable chkMain1 and chkMain2 but enabling child boxes. or when chkMain1 is checked the code should disable chkMain and chkMain2 but enabling child boxes.

    Read the article

  • [How to] Checkbox :: Select one at a time

    - by neo-nant
    This is the code section from inno setup.My intention is to make two Checkbox where at a time one is being selected. But this code return error when first checkbox is clicked. [code] procedure CheckBoxOnClick(Sender: TObject); var Box2,CheckBox: TNewCheckBox; begin if CheckBox.Checked then ///error:"Could not call proc" [sud it be global if then how to or what to change?] BEGIN CheckBox.State := cbUnchecked; Box2.State := cbChecked; END else BEGIN CheckBox.State := cbChecked; Box2.State := cbUnchecked; END; end; procedure Box2OnClick(Sender: TObject); var Box2,CheckBox: TNewCheckBox; begin if Box2.Checked then ///error:same BEGIN CheckBox.State := cbChecked; Box2.State := cbUnchecked; END else BEGIN CheckBox.State := cbUnchecked; Box2.State := cbChecked; END; end; procedure CreateTheWizardPages; var Page: TWizardPage; Box2,CheckBox: TNewCheckBox; begin { TButton and others } Page := CreateCustomPage(wpWelcome, '', ''); CheckBox := TNewCheckBox.Create(Page); CheckBox.Top :=ScaleY(8)+ScaleX(50); CheckBox.Width := Page.SurfaceWidth; CheckBox.Height := ScaleY(17); CheckBox.Caption := 'Do this'; CheckBox.Checked := True; CheckBox.OnClick := @CheckBoxOnClick; CheckBox.Parent := Page.Surface; Box2 := TNewCheckBox.Create(Page); Box2.Top :=ScaleY(8)+ScaleX(70); Box2.Width := Page.SurfaceWidth; Box2.Height := ScaleY(17); Box2.Caption := 'No,Thanks.'; Box2.Checked := False; Box2.OnClick := @Box2OnClick; Box2.Parent := Page.Surface; end; procedure InitializeWizard(); //var begin { Custom wizard pages } CreateTheWizardPages; end; Please tell me where to change..

    Read the article

  • Checkbox has the wrong values

    - by Praesagus
    I have a page with several checkboxes on it, along with a dropdownlist of users. The checkboxes correlate to the user's permissions so each user is different. When a different user is chosen, the check boxes should change to match that user's permissions. The codebehind is correct, I stepped through it and the checkbox.checked value is being assigned to the box with the correct value to match the user. chk.Checked = viewable; No matter what I assign to the checked property the value stays the same as the very first submittal. I tried chk.EnableViewState = false; but that did not help. I am sure it is dot net trying to be helpful (grrr). Thank you for your help. There is no databinding per se. I will be saving the values from the textboxes via xmlhttp when the user clicks on them. I never want the check boxes to fill with values other than what I give them. Here is the essence of the code. foreach (DataRow dRow in dTable.Rows) { viewable = Convert.ToBoolean(dRow["Viewable"]); table.Rows.Add(CreatePageRow(Convert.ToString(dRow["SitePageViewName"]), Convert.ToString(dRow["SitePageName"]), folderDepth, maxFolderDepth, viewable)); } FileTree.Controls.Add(table); private TableRow CreatePageRow(String ViewName, String FileName, Int32 folderDepth, Int32 maxFolderDepth, Boolean viewable) { TableRow tr = new TableRow(); tr.Cells.Add(CreateCheckboxCell(viewable, folderDepth+3)); tr.Cells.Add(CreateImageCell("/images/icon/sm/report_graph.gif", "Page: " + ViewName)); tr.Cells.Add(CreateTitleCell(ViewName, maxFolderDepth - (folderDepth+1), FileName)); return tr; } private TableCell CreateCheckboxCell(Boolean viewable, Int32 colSpan) { TableCell td = new TableCell(); if (colSpan > 1) td.ColumnSpan = colSpan; CheckBox chk = new CheckBox(); chk.Checked = viewable; chk.EnableViewState = false; td.Controls.Add(chk); td.CssClass = "right"; return td; }

    Read the article

  • edit row in gridview

    - by user576998
    Hi.I would like to help me with my code. I have 2 gridviews. In the first gridview the user can choose with a checkbox every row he wants. These rows are transfered in the second gridview. All these my code does them well.Now, I want to edit the quantity column in second gridview to change the value but i don't know what i must write in edit box. Here is my code: using System; using System.Data; using System.Data.SqlClient; using System.Configuration; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Web.UI.HtmlControls; using System.Collections; public partial class ShowLand : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { if (!IsPostBack) { BindPrimaryGrid(); BindSecondaryGrid(); } } private void BindPrimaryGrid() { string constr = ConfigurationManager.ConnectionStrings["conString"].ConnectionString; string query = "select * from Land"; SqlConnection con = new SqlConnection(constr); SqlDataAdapter sda = new SqlDataAdapter(query, con); DataTable dt = new DataTable(); sda.Fill(dt); gridview2.DataSource = dt; gridview2.DataBind(); } private void GetData() { DataTable dt; if (ViewState["SelectedRecords1"] != null) dt = (DataTable)ViewState["SelectedRecords1"]; else dt = CreateDataTable(); CheckBox chkAll = (CheckBox)gridview2.HeaderRow .Cells[0].FindControl("chkAll"); for (int i = 0; i < gridview2.Rows.Count; i++) { if (chkAll.Checked) { dt = AddRow(gridview2.Rows[i], dt); } else { CheckBox chk = (CheckBox)gridview2.Rows[i] .Cells[0].FindControl("chk"); if (chk.Checked) { dt = AddRow(gridview2.Rows[i], dt); } else { dt = RemoveRow(gridview2.Rows[i], dt); } } } ViewState["SelectedRecords1"] = dt; } private void SetData() { CheckBox chkAll = (CheckBox)gridview2.HeaderRow.Cells[0].FindControl("chkAll"); chkAll.Checked = true; if (ViewState["SelectedRecords1"] != null) { DataTable dt = (DataTable)ViewState["SelectedRecords1"]; for (int i = 0; i < gridview2.Rows.Count; i++) { CheckBox chk = (CheckBox)gridview2.Rows[i].Cells[0].FindControl("chk"); if (chk != null) { DataRow[] dr = dt.Select("id = '" + gridview2.Rows[i].Cells[1].Text + "'"); chk.Checked = dr.Length > 0; if (!chk.Checked) { chkAll.Checked = false; } } } } } private DataTable CreateDataTable() { DataTable dt = new DataTable(); dt.Columns.Add("id"); dt.Columns.Add("name"); dt.Columns.Add("price"); dt.Columns.Add("quantity"); dt.Columns.Add("total"); dt.AcceptChanges(); return dt; } private DataTable AddRow(GridViewRow gvRow, DataTable dt) { DataRow[] dr = dt.Select("id = '" + gvRow.Cells[1].Text + "'"); if (dr.Length <= 0) { dt.Rows.Add(); dt.Rows[dt.Rows.Count - 1]["id"] = gvRow.Cells[1].Text; dt.Rows[dt.Rows.Count - 1]["name"] = gvRow.Cells[2].Text; dt.Rows[dt.Rows.Count - 1]["price"] = gvRow.Cells[3].Text; dt.Rows[dt.Rows.Count - 1]["quantity"] = gvRow.Cells[4].Text; dt.Rows[dt.Rows.Count - 1]["total"] = gvRow.Cells[5].Text; dt.AcceptChanges(); } return dt; } private DataTable RemoveRow(GridViewRow gvRow, DataTable dt) { DataRow[] dr = dt.Select("id = '" + gvRow.Cells[1].Text + "'"); if (dr.Length > 0) { dt.Rows.Remove(dr[0]); dt.AcceptChanges(); } return dt; } protected void CheckBox_CheckChanged(object sender, EventArgs e) { GetData(); SetData(); BindSecondaryGrid(); } private void BindSecondaryGrid() { DataTable dt = (DataTable)ViewState["SelectedRecords1"]; gridview3.DataSource = dt; gridview3.DataBind(); } } and the source code is <asp:GridView ID="gridview2" runat="server" AutoGenerateColumns="False" DataKeyNames="id" DataSourceID="SqlDataSource5"> <Columns> <asp:TemplateField> <HeaderTemplate> <asp:CheckBox ID="chkAll" runat="server" onclick = "checkAll(this);" AutoPostBack = "true" OnCheckedChanged = "CheckBox_CheckChanged"/> </HeaderTemplate> <ItemTemplate> <asp:CheckBox ID="chk" runat="server" onclick = "Check_Click(this)" AutoPostBack = "true" OnCheckedChanged = "CheckBox_CheckChanged" /> </ItemTemplate> </asp:TemplateField> <asp:BoundField DataField="id" HeaderText="id" InsertVisible="False" ReadOnly="True" SortExpression="id" /> <asp:BoundField DataField="name" HeaderText="name" SortExpression="name" /> <asp:BoundField DataField="price" HeaderText="price" SortExpression="price" /> <asp:BoundField DataField="quantity" HeaderText="quantity" SortExpression="quantity" /> <asp:BoundField DataField="total" HeaderText="total" SortExpression="total" /> </Columns> </asp:GridView> <asp:SqlDataSource ID="SqlDataSource5" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" SelectCommand="SELECT * FROM [Land]"></asp:SqlDataSource> <br /> </div> <div> <asp:GridView ID="gridview3" runat="server" AutoGenerateColumns = "False" DataKeyNames="id" EmptyDataText = "No Records Selected" > <Columns> <asp:BoundField DataField = "id" HeaderText = "id" /> <asp:BoundField DataField = "name" HeaderText = "name" ReadOnly="True" /> <asp:BoundField DataField = "price" HeaderText = "price" DataFormatString="{0:c}" ReadOnly="True" /> <asp:TemplateField HeaderText="quantity"> <EditItemTemplate> <asp:TextBox ID="TextBox1" runat="server" Text='<%# Bind("quantity")%>'</asp:TextBox> </EditItemTemplate> <ItemTemplate> <asp:Label ID="Label1" runat="server" Text='<%# Bind("quantity") %>'></asp:Label> </ItemTemplate> </asp:TemplateField> <asp:BoundField DataField = "total" HeaderText = "total" DataFormatString="{0:c}" ReadOnly="True" /> <asp:CommandField ShowEditButton="True" /> </Columns> </asp:GridView> <asp:Label ID="totalLabel" runat="server"></asp:Label> <br /> </div> </form> </body> </html>

    Read the article

  • firebug saying not a function

    - by Aaron
    <script type = "text/javascript"> var First_Array = new Array(); function reset_Form2() {document.extraInfo.reset();} function showList1() {document.getElementById("favSports").style.visibility="visible";} function showList2() {document.getElementById("favSubjects").style.visibility="visible";} function hideProceed() {document.getElementById('proceed').style.visibility='hidden';} function proceedToSecond () { document.getElementById("div1").style.visibility="hidden"; document.getElementById("div2").style.visibility="visible"; document.getElementById("favSports").style.visibility="hidden"; document.getElementById("favSubjects").style.visibility="hidden"; } function backToFirst () { document.getElementById("div1").style.visibility="visible"; document.getElementById("div2").style.visibility="hidden"; document.getElementById("favSports").style.visibility="visible"; document.getElementById("favSubjects").style.visibility="visible"; } function reset_Form(){ document.personalInfo.reset(); document.getElementById("favSports").style.visibility="hidden"; document.getElementById("favSubjects").style.visibility="hidden"; } function isValidName(firstStr) { var firstPat = /^([a-zA-Z]+)$/; var matchArray = firstStr.match(firstPat); if (matchArray == null) { alert("That's a weird name, try again"); return false; } return true; } function isValidZip(zipStr) { var zipPat =/[0-9]{5}/; var matchArray = zipStr.match(zipPat); if(matchArray == null) { alert("Zip is not in valid format"); return false; } return true; } function isValidApt(aptStr) { var aptPat = /[\d]/; var matchArray = aptStr.match(aptPat); if(matchArray == null) { if (aptStr=="") { return true; } alert("Apt is not proper format"); return false; } return true; } function isValidDate(dateStr) { //requires 4 digit year: var datePat = /^(\d{1,2})(\/|-)(\d{1,2})\2(\d{4})$/; var matchArray = dateStr.match(datePat); if (matchArray == null) { alert("Date is not in a valid format."); return false; } return true; } function checkRadioFirst() { var rb = document.personalInfo.salutation; for(var i=0;i<rb.length;i++) { if(rb[i].checked) { return true; } } alert("Please specify a salutation"); return false; } function checkCheckFirst() { var rb = document.personalInfo.operatingSystems; for(var i=0;i<rb.length;i++) { if(rb[i].checked) { return true; } } alert("Please specify an operating system") ; return false; } function checkSelectFirst() { if ( document.personalInfo.sports.selectedIndex == -1) { alert ( "Please select a sport" ); return false; } return true; } function checkRadioSecond() { var rb = document.extraInfo.referral; for(var i=0;i<rb.length;i++) { if(rb[i].checked) { return true; } } alert("Please select form of referral"); return false; } function checkCheckSecond() { var rb = document.extraInfo.officeSupplies; for(var i=0;i<rb.length;i++) { if(rb[i].checked) { return true; } } alert("Please select an office supply option"); return false; } function checkSelectSecond() { if ( document.extraInfo.colorPick.selectedIndex == 0 ) { alert ( "Please select a favorite color" ); return false; } return true; } function check_Form(){ var retvalue = isValidDate(document.personalInfo.date.value); if(retvalue) { retvalue = isValidZip(document.personalInfo.zipCode.value); if(retvalue) { retvalue = isValidName(document.personalInfo.nameFirst.value); if(retvalue) { retvalue = checkRadioFirst(); if(retvalue) { retvalue = checkCheckFirst(); if(retvalue) { retvalue = checkSelectFirst(); if(retvalue) { retvalue = isValidApt(document.personalInfo.aptNum.value); if(retvalue){ document.getElementById('proceed').style.visibility='visible'; var rb = document.personalInfo.salutation; for(var i=0;i<rb.length;i++) { if(rb[i].checked) { var salForm = rb[i].value; } } var SportsOptions = ""; for(var j=0;j<document.personalInfo.sports.length;j++){ if ( document.personalInfo.sports.options[j].selected){ SportsOptions += document.personalInfo.sports.options[j].value + " "; } } var SubjectsOptions= ""; for(var k=0;k<document.personalInfo.subjects.length;k++){ if ( document.personalInfo.subjects.options[k].selected){ SubjectsOptions += document.personalInfo.subjects.options[k].value + " "; } } var osBox = document.personalInfo.operatingSystems; var OSOptions = ""; for(var y=0;y<osBox.length;y++) { if(osBox[y].checked) { OSOptions += osBox[y].value + " "; } } First_Array[0] = salForm; First_Array[1] = document.personalInfo.nameFirst.value; First_Array[2] = document.personalInfo.nameMiddle.value; First_Array[3] = document.personalInfo.nameLast.value; First_Array[4] = document.personalInfo.address.value; First_Array[5] = document.personalInfo.aptNum.value; First_Array[6] = document.personalInfo.city.value; for(var l=0; l<document.personalInfo.state.length; l++) { if (document.personalInfo.state.options[l].selected) { First_Array[7] = document.personalInfo.state[l].value; } } First_Array[8] = document.personalInfo.zipCode.value; First_Array[9] = document.personalInfo.date.value; First_Array[10] = document.personalInfo.phone.value; First_Array[11] = SportsOptions; First_Array[12] = SubjectsOptions; First_Array[13] = OSOptions; alert("Everything looks good."); document.getElementById('validityButton').style.visibility='hidden'; } } } } } } } } /*function formAction2() { var retvalue; retvalue = checkRadioSecond(); if(!retvalue) { return retvalue; } retvalue = checkCheckSecond(); if(!retvalue) { return retvalue; } return checkSelectSecond() ; } */ </script> This is just a sample of the code, there are alot more functions, but I thought the error might be related to surrounding code. I have absolutely no idea why, as I know all the surrounding functions execute, and First_Array is populated. However when I click the Proceed to Second button, the onclick attribute does not execute because Firebug says proceedToSecond is not a function button code: <input type="button" id="proceed" name="proceedToSecond" onclick="proceedToSecond();" value="Proceed to second form">

    Read the article

  • How to get this Qt state machine to work?

    - by Ton van den Heuvel
    I have two widgets that can be checked, and a numeric entry field that should contain a value greater than zero. Whenever both widgets have been checked, and the numeric entry field contains a value greater than zero, a button should be enabled. I am struggling with defining a proper state machine for this situation. So far I have the following: QStateMachine *machine = new QStateMachine(this); QState *buttonDisabled = new QState(QState::ParallelStates); buttonDisabled->assignProperty(ui_->button, "enabled", false); QState *a = new QState(buttonDisabled); QState *aUnchecked = new QState(a); QFinalState *aChecked = new QFinalState(a); aUnchecked->addTransition(wa, SIGNAL(checked()), aChecked); a->setInitialState(aUnchecked); QState *b = new QState(buttonDisabled); QState *bUnchecked = new QState(b); QFinalState *bChecked = new QFinalState(b); employeeUnchecked->addTransition(wb, SIGNAL(checked()), bChecked); b->setInitialState(bUnchecked); QState *weight = new QState(registerButtonDisabled); QState *weightZero = new QState(weight); QFinalState *weightGreaterThanZero = new QFinalState(weight); weightZero->addTransition(this, SIGNAL(validWeight()), weightGreaterThanZero); weight->setInitialState(weightZero); QState *buttonEnabled = new QState(); buttonEnabled->assignProperty(ui_->registerButton, "enabled", true); buttonDisabled->addTransition(buttonDisabled, SIGNAL(finished()), buttonEnabled); buttonEnabled->addTransition(this, SIGNAL(invalidWeight()), weightZero); machine->addState(registerButtonDisabled); machine->addState(registerButtonEnabled); machine->setInitialState(registerButtonDisabled); machine->start(); The problem here is that the following transition: buttonEnabled->addTransition(this, SIGNAL(invalidWeight()), weightZero); causes all the child states in the registerButtonDisabled state to be reverted to their initial state. This is unwanted behaviour, as I want the a and b states to remain in the same state. How do I prevent this?

    Read the article

  • Finder plugin in 10.6

    - by Girish Kolari
    I want to color badge files and folders based on the some condition in finder, what is the approach to achieve this in Mac OS X 10.6 I have checked this question: This only talk about the context menu in finder http://stackoverflow.com/questions/1651075/finder-plugin-in-snow-leopard I have even checked: http://scplugin.tigris.org/ even they don't do color badging in 10.6 which is pending task. Thanks in advance for your all help

    Read the article

  • problem with treeview

    - by Xaver
    I want to configure a treeview so that when all checkboxes of a parent are checked, then the parent checkbox is checked. And when all checkboxes are unchecked, the parent checkbox is unchecked. Does the treeview class have a standard property for that?

    Read the article

  • jQuery Validation plugin: checkbox groups and error message issues

    - by boomturn
    I've put together a form using the jQuery Validation plugin, and all inputs are fine with working validation and error messages – except for checkboxes. I have two checkbox problems. The first is that the Validation plugin API doesn't seem to handle checkboxes in grouped contexts (I'm using fieldsets for grouping). Found several approaches to the issue here, including reference to a post by Rebecca Murphey for a more general case using a custom method and class. Adapting that to this situation: jQuery.validator.addMethod('required_group', function(val, el) { var fieldParent = $(el).closest('fieldset'); return fieldParent.find('.required_group:checked').length; }); jQuery.validator.addClassRules('required_group', { 'required_group': true }); jQuery.validator.messages.required_group = 'Please check at least one box.'; This sort of works, but produces error messages on every checkbox, and only removes them as each box is clicked. This is not an acceptable situation for the user, who can only get rid of them by clicking false positives. Ideally, I guess what's needed is something to prevent or eliminate extra messages before they are displayed and use errorPlacement to display a single error message in the parent fieldset, that would then be removed with a click on any checkbox. Less ideally, maybe they would all display but an event handler could turn off the full set of redundant messages with a click, which is what this approach offered by tvanfosson appears to do. (Another customized approach here, but I couldn't get it to work.) I guess I should also note this form requires the checkboxes to have different names. My second problem is that one of the fieldsets with checkboxes in the form also contains a nested fieldset of checkboxes under one of the outer checkboxes. So in addition to the first-level one-box-checked requirement, if the particular checkbox containing the second-level checkboxes is checked, then at least one of the second-level boxes must be checked. Not sure about the right approach; I'm guessing what needs to happen (following the above scheme) is that the trigger checkbox would use toggleClass to add/remove 'required_group' class to all the checkboxes in the subfield, which would then (hopefully) behave the same as the parent field: $("#triggerCheckbox").click(function () { $(this).find(":checkbox").toggleClass("required_group"); }); Any suggestions or ideas welcome. I'm well beyond my limited jQuery skills on this one and would be happy to hear that I missed simple, elegant and/or obvious ways to do this!

    Read the article

  • ASP.Net Checkbox value at postback is wrong?

    - by Duracell
    We have a checkbox that is initially disabled and checked. It is then enabled on the client side through javascript. If the user then unchecks the box and presses the button to invoke a postback, the state of the checkbox remains as checked on the server side. This is obviously undesirable behaviour. Here is an example. <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="testcb.aspx.cs" Inherits="ESC.testcb" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title></title> </head> <body> <form id="form1" runat="server"> <script type="text/javascript"> function buttonClick() { var cb = document.getElementById('<%= CheckBox1.ClientID %>'); cb.disabled = false; cb.parentNode.disabled = false; } </script> <div> <asp:CheckBox ID="CheckBox1" runat="server" Checked="true" Enabled="false" /> <asp:Button ID="Button1" runat="server" Text="Button" OnClientClick="buttonClick(); return false;" /> <asp:Button ID="Button2" runat="server" Text="Button2" OnClick="button2Click" /> </div> </form> </body> </html> And the Server-side code: using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; namespace ESC { public partial class testcb : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { } protected void button2Click(object sender, EventArgs e) { string h = ""; } } } So we break at the "string h" line and check the value of CheckBox1.Checked. It is true, even if it is unchecked on the form.

    Read the article

  • Monitoring DOM Changes in JQuery

    - by user363866
    Is there a way to detect when the disabled attribute of an input changes in JQuery. I want to toggle the style based on the value. I can copy/paste the same enable/disable code for each change event (as I did below) but I was looking for a more generic approach. Can I create a custom event that will monitor the disabled attribute of specified inputs? Example: <style type="text/css">.disabled{ background-color:#dcdcdc; }</style> <fieldset> <legend>Option 1</legend> <input type="radio" name="Group1" id="Radio1" value="Yes" />Yes <input type="radio" name="Group1" id="Radio2" value="No" checked="checked" />No <div id="Group1Fields" style="margin-left: 20px;"> Percentage 1: <input type="text" id="Percentage1" disabled="disabled" /><br /> Percentage 2: <input type="text" id="Percentage2" disabled="disabled" /><br /> </div> </fieldset> <fieldset> <legend>Option 2</legend> <input type="radio" name="Group2" id="Radio3" value="Yes" checked="checked" />Yes <input type="radio" name="Group2" id="Radio4" value="No" />No <div id="Group2Fields" style="margin-left: 20px;"> Percentage 1: <input type="text" id="Text1" /><br /> Percentage 2: <input type="text" id="Text2" /><br /> </div> </fieldset> <script type="text/javascript"> $(document).ready(function () { //apply disabled style to all disabled controls $("input:disabled").addClass("disabled"); $("input[name='Group1']").change(function () { var disabled = ($(this).val() == "No") ? "disabled" : ""; $("#Group1Fields input").attr("disabled", disabled); //apply disabled style to all disabled controls $("input:disabled").addClass("disabled"); //remove disabled style to all enabled controls $("input:not(:disabled)").removeClass("disabled"); }); $("input[name='Group2']").change(function () { var disabled = ($(this).val() == "No") ? "disabled" : ""; $("#Group2Fields input").attr("disabled", disabled); //apply disabled style to all disabled controls $("input:disabled").addClass("disabled"); //remove disabled style to all enabled controls $("input:not(:disabled)").removeClass("disabled"); }); }); </script>

    Read the article

  • PHP - Store & Calculate the total mark from radio input

    - by user1806136
    I have designed a small web-based system that have a school evaluation form to ask specific users who can access the system" some questions and the input will be a radio type ( 1 or 2 or 3 or 4)! the code is working and can inserts the input into the database but i don't know the correct query to calculate the total mark and store it in the database, this is currently working code below: <?php session_start(); $Load=$_SESSION['login_user']; include('../connect.php'); $sql= "Select name from student where ID='$Load'"; $username = mysql_query($sql); $id=$_SESSION['login_user']; if (isset($_POST['submit'])) { $v1 = $_POST['v1']; $v2 = $_POST['v2']; $v3 = $_POST['v3']; $total = $_POST['total']; mysql_query("INSERT into Form1 (P1,P2,P3,TOTAL) values('$v1','$v2','$v3','$total')") or die(mysql_error()); header("Location: mark.php"); } ?> <html> <head> <?php if(!isset($_SESSION['login_user'])) header("Location:index.html"); ?> <title>Q&A Form</title> </head> <body> <center><form method="post" action="" > <table style="width: 20%" > <tr> <th> Criteria </th> <th> </th> </tr> <tr> <th> Excellent </th> <td > 4 </td> </tr> <tr> <th > Good <font size="3" > </font></th> <td> 3 <font size="4" > </font></td> </tr> <tr> <th > Average <font size="3" > </font></th> <td > 2 <font size="4" > </font></td> </tr> <tr> <th > Poor <font size="3" > </font></th> <td > 1 <font size="4" > </td> </tr> <font size='4'> <table style="width: 70%"> <tr> <th > School Evaluation <font size="4" > </font></th> <tr> <th > Criteria <font size="4" > </font></th> <th> 4<font size="4" > </font></th> <th> 3<font size="4" > </font></th> <th> 2<font size="4" > </font></th> <th> 1<font size="4" > </font></th> </tr> <tr> <th> Your attendance<font size="4" > </font></th> <td> <input type="radio" name ="v1" value = "4" checked = "checked" /></td> <td> <input type="radio" name ="v1" value = "3" /></td> <td> <input type="radio" name ="v1" value = "2" /></td> <td> <input type="radio" name ="v1" value = "1" /></td> </tr> <tr> <th > Your grades <font size="4" > </font></th> <td> <input type="radio" name ="v2" value = "4" checked = "checked" /></td> <td> <input type="radio" name ="v2" value = "3" /></td> <td> <input type="radio" name ="v2" value = "2" /></td> <td> <input type="radio" name ="v2" value = "1" /></td> </tr> <tr> <th >Your self-control <font size="4" > </font></th> <td> <input type="radio" name ="v3" value = "4" checked = "checked" /></td> <td> <input type="radio" name ="v3" value = "3" /></td> <td> <input type="radio" name ="v3" value = "2" /></td> <td> <input type="radio" name ="v3" value = "1" /></td> </tr> </tr> </table> <br> <a href="evaE.php"> <td><input type="submit" name="submit" value="Submit"> <input type="reset" name="clear" value="clear" style="width: 70px"></td> <?php $total = $v1+ $v2 + $v3; ?> </form> </center> </div> </body> </html> i used this query but it doesn't work out .. any help please? <?php $total = $v1+ $v2 + $v3; ?>

    Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >