Search Results

Search found 15323 results on 613 pages for 'db2 connect'.

Page 22/613 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

  • Cannot connect to wifi after downloading 12.04, repeated prompts for password

    - by Daytown3487
    I have had this OS for a little bit but this is my first upgrade and my first issue I am trying to deal with without my buddy who got my on Ubuntu in the first place (who is on the other side of the country.) I am running an IBM Lenovo T400 Thinkpad that had 11.10 on it and worked flawless. I upgraded to 12.04 a few weeks back and I have not been able to connect to the wifi in my home or anywhere for that matter. I have been trying to mess with it through reading the forums and am not quite sure what my problem is. I am running off of Fios Internet and the wifi keep disconnecting and prompts me to retype the password for reconnecting. If you guys could give me a step by step process of how I should go about fixing this I would GREATLY appreciate it!

    Read the article

  • Can't connect to or search wifi

    - by Mark
    I just installed the latest version of Ubuntu, I think it was 13. Something. Anyway I got it running and now I've been trying to connect to my wifi. No matter where I go I don't see an option for wifi. I looked on the computer and found some commands to use in terminal to run a scan for wifi networks but all of them returned the error "interface doesn't support scanning" if anyone could help that would be great...I can't do anything without wifi! Also I'm new to this so if you could give step by step directions that would help a lot. Thanks!

    Read the article

  • Why can't my Wifi cannot connect or disconnect?

    - by tmy1018
    Wifi connection might drop spontaneously or simply cannot connect. Users on Ubuntu 10.04 and 11.04 have reported experiencing the problem. Running dmesg would show: [210749.637705] wlan0: deauthenticating from 00:23:89:48:3b:b0 by local choice (reason=3) [210778.632244] wlan0: deauthenticating from 00:23:89:48:3b:b0 by local choice (reason=3) [210784.456359] wlan0: deauthenticating from 00:23:89:82:75:70 by local choice (reason=3) which is pretty cryptic. I have tried: kill -9 wpa_supplicant, but wpa_supplicant keeps getting restarted each time. Also, some have suggested that this was caused by enabling power management. However, this might not be true, as the problem has presented itself in a situation where power management was disabled.

    Read the article

  • Linux does not connect to wireless network under Hyper-V with Windows 8

    - by Graznarak
    I have a VM I am trying to run under Hyper-V on Windows 8 Pro. I am using an Asus PDE-N15 adapter on the host machine. When I run Windows 8 in the VM it connects to the network and everything works. When I use Linux (Ubuntu 13.04 32-bit, Ubuntu 13.04 64-bit, Fedora, CentOS) it will not connect to the network. When I run ifconfig I see the adapter show up as eth0 with the correct HWaddr. I see that TX bytes 0, and RX bytes == 0. Could anyone help me figure out how to get this to work?

    Read the article

  • Row Number for group by ?

    - by Damien Joe
    I have table structure like Category EmpName 1 Harry 1 John 1 Ford 2 James 2 Mark 2 Shane 3 Oliver 3 Ted I want results like Category EmpName RowNumber 1 Harry 1 1 John 2 1 Ford 3 2 James 1 2 Mark 2 2 Shane 3 3 Oliver 1 3 Ted 2 I am using db2 and row_number() is not working for different groups of records.

    Read the article

  • Removing DB2INSTDEF value from registry

    - by Peter
    Database: DB2 v9.5 on AIX Scenario: I have 2 instances- db2inst1 and db2inst2. I created db2inst1 first. I went ahead and created db2inst2 next and I do 'db2set -all' on db2inst2 instance I see this: [g] DB2INSTDEF=db2inst1 I would like to reset DB2INSTDEF and make it not show up when I do 'db2set -all' (other than dropping and recreating db2inst1). Thanks.

    Read the article

  • Covering Index versus Clustered Index (Database Index)

    - by Mestika
    Hi, I'm working on a database system and it's indexes, but I'm having a really hard time seing the clear difference between a covering index and a clustered index. I've googled my way around but hasn't got a clear cut answer on: What is the differences between the two types of indexes When do I use Covering index and when do I use Clustered index. I hope someone can explain it to me in a almost children-like answer :-) Sincerely Mestika By the way, I'm using IBM DB2 version 9.7

    Read the article

  • Getting next row using SQL

    - by Peter
    I have 2 tables with data thus: Col1 Col2 ------- -------- Admin001 A Admin001 B Admin002 C Admin002 C Admin003 A Admin003 C I need to find all instances of Col2 values with 'A' immediately followed by 'B'. 'A' followed by any other symbol does not count. Is there a way to use SQL to accomplish this? Environment is DB2 LUW v9.5

    Read the article

  • Why empty String is treated as null in oracle?

    - by GK
    We are using empty string in DB2 database for some business logic. but when the same record tried to insert into the Oracle it throws some not null property references to null value error. that is oracle treats empty string as null. So i am wondering why it is like that. and if there is a requirement of storing empty string how to do that on oracle?

    Read the article

  • Databases Views with Parameters

    - by asrijaal
    Hi there, I know that is it possible to create a View with Parameters at MSSQL, does anyone knows if I can achieve something similar with a DB2 database? I have a more complicated query which includes a user number which I want to pass as param to the view.

    Read the article

  • Can somebody suggest good learning source of IMS?

    - by Raja Reddy
    I would like to learn working with IMS, can somebody suggest me a good source? I'm not sure if it matters to say that I have quite good exposure and experience with INSYNC DB2 and QMF. So anything that can depict and explain the advantages and disadvantages over IMS would be really helpful. Thanks for your help beforehand..

    Read the article

  • Can somebody suggest good source for IMS?

    - by Raja Reddy
    I would like to learn working with IMS, can somebody suggest me a good source? I'm not sure if it matters to say that I have quite good exposure and experience with INSYNC DB2 and QMF. So anything that can depict and explain the advantages and disadvantages over IMS would be really helpful. Thanks for your help beforehand..

    Read the article

  • take only one record of select

    - by jack.cap.rooney
    I need to fetch only first record (because I need last date) of resultset, at the moment I have this resultset from this sql tring: SELECT BCACC,FLDAT FROM ANAGEFLF ORDER BY FLDAT DESC and I see this record: A.M.T. AUTOTRASPORTI SRL 20080220 A.M.T. AUTOTRASPORTI SRL 20080123 A.M.T. AUTOTRASPORTI SRL 20070731 APOFRUIT ITALIA 20080414 APOFRUIT ITALIA 20080205 APOFRUIT ITALIA 20071210 APOFRUIT ITALIA 20070917 APOFRUIT ITALIA 20070907 now I need to take only one record (first) for every BCACC, I would take this resultset: A.M.T. AUTOTRASPORTI SRL 20080220 APOFRUIT ITALIA 20080414 I've just try group it for BCACC but I receive an sql error, I'm workin on DB2 ibmI

    Read the article

  • Autoincrement based on a set of other columns

    - by slack3r
    I have a table Course and every Course has many Resources. Course ========== course_id Resource ========== course_id number I want something like a seperate autoincrement for each course_id. Or, in other words, I want to auto-enumerate the resources for a given course. For example, the resource table could look something like: course_id | number ================== 1 | 1 1 | 2 2 | 1 1 | 3 1 | 4 2 | 2 2 | 3 and so on. I want to do this in SQL, using IBM DB2.

    Read the article

  • Side-by-side comparison of data by month in SQL

    - by ScottR
    I have table similar to the following: Year | Product | Value 2006 A 10 2006 B 20 2006 C 30 2007 A 40 2007 B 50 2007 C 60 I would like a query that would return the following comparison Product | 2006 Value | 2007 Value A 10 40 B 20 50 C 30 60 What are the options to do so? Can it be done without joins? I'm working with DB2, but answers in all SQL types would be helpful.

    Read the article

  • how to exchange variables between extern iframe and site

    - by helle
    hey guys, for developement reasons (working with facebook-connect) i put the connect iframe in an iframe. on that way i am able to work on the connect-thing independent of my ip and don't have to develop on the live-server. the iframe holding the connect-button iframe is on my server, accessing the same db-server as the developer version (developer version is running on localhsot). as far as good ... BUT how can i let the parent site know, that the user has connected, so that i get his profile-picture displayd as reaction to this? how can i react in generally on an action/event/JS in an iframe? is there a way? can the iframe post data to the parent site? like a time-stamp and fb_userid? if the iframe stuff doesn't work ... i thougt of saving the ip to the fb_userid (to db) and check matches ... but i don't like this idea.

    Read the article

  • cannot connect with huawei e173 after upgrade to 12.10 using network manager

    - by user104195
    Since upgrade from 12.04 to 12.10 I can't connect to internet using mobile broadband modem Huawei e173. It worked earlier without problems and now it seems to be properly recognized (at least its connections appear in network manager applet), and after selecting connection manually it starts connection procedure. After about 20 seconds it returns to state disconnected. After browsing internet I've found that running network manager with: NM_PPP_DEBUG=1 /usr/sbin/NetworkManager --no-daemon After inserting modem I get: NetworkManager[507]: <warn> (ttyUSB2): failed to look up interface index NetworkManager[507]: <info> (ttyUSB2): new GSM/UMTS device (driver: 'option1' ifindex: 0) NetworkManager[507]: <info> (ttyUSB2): exported as /org/freedesktop/NetworkManager/Devices/2 NetworkManager[507]: <info> (ttyUSB2): now managed NetworkManager[507]: <info> (ttyUSB2): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] NetworkManager[507]: <info> (ttyUSB2): deactivating device (reason 'managed') [2] NetworkManager[507]: <info> (ttyUSB2): device state change: unavailable -> disconnected (reason 'none') [20 30 0] where 'failed to look up interface index' seems to be suspicious. After starting connecting: NetworkManager[507]: <info> Activation (ttyUSB2) starting connection 'Plus - Dostep standardowy' NetworkManager[507]: <info> (ttyUSB2): device state change: disconnected -> prepare (reason 'none') [30 40 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started... NetworkManager[507]: <info> (ttyUSB2): device state change: prepare -> need-auth (reason 'none') [40 60 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started... NetworkManager[507]: <info> (ttyUSB2): device state change: need-auth -> prepare (reason 'none') [60 40 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete. NetworkManager[507]: <info> WWAN now enabled by management service NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) starting... NetworkManager[507]: <info> (ttyUSB2): device state change: prepare -> config (reason 'none') [40 50 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) successful. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) scheduled. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) started... NetworkManager[507]: <info> (ttyUSB2): device state change: config -> ip-config (reason 'none') [50 70 0] NetworkManager[507]: <info> starting PPP connection NetworkManager[507]: <info> pppd started with pid 663 NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) started... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded. ** Message: nm-ppp-plugin: (plugin_init): initializing ** Message: nm-ppp-plugin: (nm_phasechange): status 3 / phase 'serial connection' Removed stale lock on ttyUSB2 (pid 32146) using channel 23 NetworkManager[507]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) NetworkManager[507]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. NetworkManager[507]: <warn> /sys/devices/virtual/net/ppp0: couldn't determine device driver; ignoring... Using interface ppp0 Connect: ppp0 <--> /dev/ttyUSB2 ** Message: nm-ppp-plugin: (nm_phasechange): status 5 / phase 'establish' sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] NetworkManager[507]: <warn> pppd timed out or didn't initialize our dbus module NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) started... NetworkManager[507]: <info> (ttyUSB2): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5] NetworkManager[507]: <warn> Activation (ttyUSB2) failed for connection 'Plus - Dostep standardowy' NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) complete. NetworkManager[507]: <info> (ttyUSB2): device state change: failed -> disconnected (reason 'none') [120 30 0] NetworkManager[507]: <info> (ttyUSB2): deactivating device (reason 'none') [0] Terminating on signal 15 ** Message: nm-ppp-plugin: (nm_phasechange): status 10 / phase 'terminate' sent [LCP TermReq id=0x2 "User request"] NetworkManager[507]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) where repeated: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] last for about 20 seconds. I've tried to downgrade network manager but failed due to many dependencies. Can anyone point me to solution or tell what should I do to further investigate the problem?

    Read the article

  • MySQL Connect: What to Expect From the Wondrous Land of MySQL Cluster

    - by Mat Keep
    The MySQL Connect conference is only a couple of weeks away, with MySQL engineers, support teams, consultants and community aces busy putting the final touches to their talks. There will be many exciting new announcements and sharing of best practices at the conference, covering the range of MySQL technologies. MySQL Cluster will a big part of this, so I wanted to share some key sessions for those of you who plan on attending, as well as some resources for those who are not lucky enough to be able to make the trip, but who can't afford to miss the key news. Of course, this is no substitute to actually being there….and the good news is that registration is still open ;-) Roadmap: Whats New in MySQL Cluster Saturday 29th, 1300-1400, in Golden Gate room 5.                                                                                        Bernd Ocklin, director of MySQL Cluster development, and myself will be taking a look at what follows the latest MySQL Cluster 7.2 release. I don't want to give to much away - lets just say its not often you can add powerful new functionality to a product while at the same time making life radically simpler for its users. For those not making it to the Conference, a live webinar repeating the talk is scheduled for Thursday 25th October at 09.00 pacific time. Hold the date, registration will be open for that soon and published to our MySQL Webinars page Best Practices Getting Started with MySQL Cluster, Hands-On Lab Saturday 29th, 1600-1700, in Plaza Room A.                                                              Santo Leto, one of our lead MySQL Cluster support engineers, regularly works with users new to MySQL Cluster, assisting them in installation, configuration, scaling, etc. In this lab, Santo will share best-practices in getting started. Delivering Breakthrough Performance with MySQL Cluster Saturday 29th, 1730-1830, in Golden Gate room 5. Frazer Clement, lead MySQL Cluster software engineer, will demonstrate how to translate the awesome Cluster benchmarks (remember 1 BILLION UPDATEs per minute ?!) into real-world performance. You can also get some best practices from our new MySQL Cluster performance guide  MySQL Cluster BoF Saturday 29th, 1900-2000, room Golden Gate 5.                                                                                                           Come and get a demonstration of new tools for the installation and configuration of MySQL Cluster, and spend time with the engineering team discussing any questions or issues you may have. Developing High-Throughput Services with NoSQL APIs to InnoDB and MySQL Cluster Sunday 30th, 1145 - 1245, in Golden Gate room 7.   In this session, JD Duncan and Andrew Morgan will present how to get started with both Memcached and new NoSQL APIs. JD and I recently ran a webinar demonstrating how to build simple Twitter-like services with Memcached and MySQL Cluster. The replay is available for download.  Case Studies: MySQL Cluster @ El Chavo, Latin America’s #1 Facebook Game Sunday 30th, 1745 - 1845, in Golden Gate room 4.                             Playful Play deployed MySQL Cluster CGE to power their market leading social game. This session will discuss the challenges they faced, why they selected MySQL Cluster and their experiences to date. You can read more about Playful Play and MySQL Cluster here  A Journey into NoSQLand: MySQL’s NoSQL Implementation Sunday 30th, 1345 - 1445, in Golden Gate room 4.                                          Lig Turmelle, web DBA at Kaplan Professional and esteemed Oracle Ace, will discuss her experiences working with the NoSQL interfaces for both MySQL Cluster and InnoDB Evaluating MySQL HA Alternatives Saturday 29th, 1430-1530, room Golden Gate 5                                                                                   Henrik Ingo, former member of the MySQL sales engineering team, will provide an overview of various HA technologies for MySQL, starting with replication, progressing to InnoDB, Galera and MySQL Cluster What about the other stuff? Of course MySQL Connect has much, much more than MySQL Cluster. There will be lots on replication (which I'll blog about soon), MySQL 5.6, InnoDB, cloud, etc, etc. Take a look at the full Content Catalog to see more. If you are attending, I hope to see you at one of the Cluster sessions...and remember, registration is still open

    Read the article

  • Connect ViewModel and View using Unity

    - by brainbox
    In this post i want to describe the approach of connecting View and ViewModel which I'm using in my last project.The main idea is to do it during resolve inside of unity container. It can be achived using InjectionFactory introduced in Unity 2.0 public static class MVVMUnityExtensions{    public static void RegisterView<TView, TViewModel>(this IUnityContainer container) where TView : FrameworkElement    {        container.RegisterView<TView, TView, TViewModel>();    }    public static void RegisterView<TViewFrom, TViewTo, TViewModel>(this IUnityContainer container)        where TViewTo : FrameworkElement, TViewFrom    {        container.RegisterType<TViewFrom>(new InjectionFactory(            c =>            {                var model = c.Resolve<TViewModel>();                var view = Activator.CreateInstance<TViewTo>();                view.DataContext = model;                return view;            }         ));    }}}And here is the sample how it could be used:var unityContainer = new UnityContainer();unityContainer.RegisterView<IFooView, FooView, FooViewModel>();IFooView view = unityContainer.Resolve<IFooView>(); // view with injected viewmodel in its datacontextPlease tell me your prefered way to connect viewmodel and view.

    Read the article

  • Ougoing telnet: Unable to connect to remote host: Connection refused

    - by brendan
    I am trying to telnet from Ubuntu server (running Maverick) on ec2 to another machine I have set up not on ec2 - we'll call it "server-x". The two machines are connected via vpn. I can ping from the ec2 machine to server-x no problem. On another machine also on the vpn but also not on ec2 I can telnet to server-x without issue so it is accepting incoming connections on that port. But when I run telnet from the ubuntu instance to server-x I get : ubuntu@ip-10-111-11-11:~$ telnet 5.1.1.1 9143 Trying 5.1.1.1... telnet: Unable to connect to remote host: Connection refused Other telnets work like this: ubuntu@ip-10-111-11-11:~$ telnet imap.gmail.com 993 Trying 173.194.76.108... Connected to gmail-imap.l.google.com. Escape character is '^]'. I have disabled ufw on the ubuntu machine. Is there anything else that can be blocking this outgoing connection? I tried adding the outgoing port to iptables but I'm not certain I'm doing that right.

    Read the article

  • Cannot connect to postgresql on port 5432

    - by Assaf Lavie
    I installed the Bitnami Django stack which included PostgreSQL 8.4. When I run psql -U postgres I get the following error: psql: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"? PG is definitely running and the pg_hba.conf file looks like this: # TYPE DATABASE USER CIDR-ADDRESS METHOD # "local" is for Unix domain socket connections only local all all md5 # IPv4 local connections: host all all 127.0.0.1/32 md5 # IPv6 local connections: host all all ::1/128 md5 What gives? "Proof" that pg is running: root@assaf-desktop:/home/assaf# ps axf | grep postgres 14338 ? S 0:00 /opt/djangostack-1.3-0/postgresql/bin/postgres -D /opt/djangostack-1.3-0/postgresql/data -p 5432 14347 ? Ss 0:00 \_ postgres: writer process 14348 ? Ss 0:00 \_ postgres: wal writer process 14349 ? Ss 0:00 \_ postgres: autovacuum launcher process 14350 ? Ss 0:00 \_ postgres: stats collector process 15139 pts/1 S+ 0:00 \_ grep --color=auto postgres root@assaf-desktop:/home/assaf# netstat -nltp | grep 5432 tcp 0 0 127.0.0.1:5432 0.0.0.0:* LISTEN 14338/postgres tcp6 0 0 ::1:5432 :::* LISTEN 14338/postgres root@assaf-desktop:/home/assaf#

    Read the article

  • Java web app, with plugin framework and ability to connect to source for updates

    - by lessthancommon
    I've searched all around for some good sources, but either have been searching for the wrong keywords, or I'm just missing something. I'm looking to redevelop a web app I've been using for some time now. Many parts are out of date, and we're constantly throwing in little hacks to attempt to give it new life. So what I'd like to do is re-engineer it from the ground up, built on some sort of plug-in framework. Before I continue, I'm more or less an intermediate Java programmer. In some ways, I'm hoping to use this project as a big learning experience. I've read a lot about OSGi, and it seems that's the most complete framework. Ideally, I would like an end result web app which I can run one instance as my hosting environment, and other instances can connect to it to grab new and updated plug-ins. Eventually I'll want to lock down these plug-ins based on some undecided criteria of who can get them (basically some will simply be updates, others will provide new functionality and should be "purchased" through an external system). But that will probably be handled in a later phase. There should be an administration view for managing bundles in a hot environment (looking to avoid having to restart the server for an update). I know all these things are possible, I'm just trying to find some good resources for reference. All the OSGi tutorials I'm finding seem to be too simplistic. If anyone here can guide me in the right direction on any or all of the items I'm looking for, it would be much appreciated. Also, this is my first post, so I'll take any comments/criticisms about the content of my post. Thanks!

    Read the article

  • bluetooth headset can connect, but not visible in pulse audio

    - by Kim Marivoet
    I have a plantronics bluetooth headset, and until yesterday I could use it without any problem. However, today it suddenly stopped working (maybe related to the last software update I did). I can still connect/disconnect my headset, but it doesn't show up in pulse audio anymore. I read through various posts that describes kind of the same problem, but none of the suggested solutions worked. I get following error in the syslog: Oct 13 16:49:57 desktop bluetoothd[1040]: Endpoint registered: sender=:1.34 path=/MediaEndpoint/HFPAG Oct 13 16:49:57 desktop bluetoothd[1040]: Endpoint registered: sender=:1.34 path=/MediaEndpoint/A2DPSource Oct 13 16:49:57 desktop bluetoothd[1040]: Endpoint registered: sender=:1.34 path=/MediaEndpoint/A2DPSink Oct 13 16:50:09 desktop kernel: [ 17.340943] input: 48:C1:AC:08:FE:8F as /devices/virtual/input/input14 Oct 13 16:50:09 desktop bluetoothd[1040]: /org/bluez/1040/hci0/dev_48_C1_AC_08_FE_8F/fd0: fd(36) ready Oct 13 16:50:09 desktop rtkit-daemon[1894]: Successfully made thread 2213 of process 1892 (n/a) owned by '1000' RT at priority 5. Oct 13 16:50:09 desktop rtkit-daemon[1894]: Supervising 5 threads of 1 processes of 1 users. Oct 13 16:50:10 desktop bluetoothd[1040]: Badly formated or unrecognized command: AT+XEVENT=USER-AGENT,COM.PLANTRONICS,PLT_VOYAGERPRO,0109,27.90,FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF Oct 13 16:50:10 desktop bluetoothd[1040]: Audio connection got disconnected Any help would be much appreciated. I'm using Ubuntu 12.04. Thanks, Kim

    Read the article

  • How to solve SocketException: Permission denied: connect

    - by luxinxian
    I recently encountered a problem getting a headache, need help... System consists of: Two subsystems, called A, B (each running on a standalone tomcat instance), currently running on the same machine. A invoke B's service via spring httpInvoker(http). B system also invoke other system's services via http. Symptoms: 1, the system starts to run normally after 10-15 days; 2, the system will run for a period of time after an exception: org.springframework.remoting.RemoteAccessException: Could not access HTTP invoker remote service at [http://xxx.xxx.xxx.xxx/remoting/call]; nested exception is java. net.SocketException: Permission denied: connect 3, when the exception occour, it continues, not only occasional .(it looks like some resources exhausted, but cpu rate < 5%, memory < 15%, network < 5%) 4, A, B when the system call fails, B system via http call to an external service also failed for the same exception. 5, closed two tomcat services, restart, and working properly. So repeatedly (step 1 - 5), has not found the root reason. Emvironment: windows 2008 R2 tomcat7.0.42 x86_64 oralce-jdk-1.7.0_40 Any ideas?

    Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >