Search Results

Search found 1232 results on 50 pages for 'dc'.

Page 22/50 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

• need help writing puppet module for sssd.conf using Hiera

  - by mr.zog

  I need to build a module to manage /etc/sssd/sssd.conf on our Red Hat VMs. The sssd modules published on the forge don't seem to do what I want, nor do I feel like forking any of them. I want to keep all the configuration data in Hiera's common.yaml file. Below is my sssd.conf file. [sssd] config_file_version = 2 services = nss, pam domains = default [nss] filter_groups = root filter_users = root reconnection_retries = 3 entry_cache_timeout = 300 entry_cache_nowait_percentage = 75 [pam] [domain/default] auth_provider = ldap ldap_id_use_start_tls = True chpass_provider = ldap cache_credentials = True ldap_search_base = dc=ederp,dc=com id_provider = ldap ldap_uri = ldaps://lvldap1.lvs01.ederp.com/ ldaps://lvldap2.lvs01.ederp.com/ ldap_tls_cacertdir = /etc/openldap/cacerts What is the best, most economical way to build the sssd.conf file? Should I have multiple .pp files such as domain.pp, pam.pp etc. or should all the lines of configuration land in init.pp?

  Read the article

• Get the "source network address" in Event ID 529 audit entries on Windows XP

  - by Make it useful Keep it simple

  In windows server 2003 when an Event 529 (logon failure) occures with a logon type of 10 (remote logon), the source network IP address is recorded in the event log. On a windows XP machine, this (and some other details) are omitted. If a bot is trying a brute force over RDP (some of my XP machines are (and need to be) exposed with a public IP address), i cannot see the originating IP address so i don't know what to block (with a script i run every few minutes). The DC does not log this detail either when the logon attempt is to the client xp machine and the DC is only asked to authenticate the credentials. Any help getting this detail in the log would be appreciated.

  Read the article

• Authorization error when testing FTP to UNC

  - by user64204

  We have a Windows Server 2008 R2 with Active Directory (hereafter called DC) running as a domain controller on which we have IIS and an FTP site installed. We have a second Server 2008 (hereafter called SHARE) which is joined to that domain and has a disk shared as a network share (\\share\Office). That network share is used as the ftp's physical path on DC. We've tested the FTP from the IIS FTP configuration panel, by clicking on Basic Settings... then Test Settings.... When setting Administrator as a username with the Connect as... option, everything is fine: When no user is provided we can the below error: Q1: Could someone explain in more understandable terms what is written in the Details text area?

  Read the article

• Migrating LDAP user and password to SAMBA4 AD

  - by Rudy Dajoh

  As title suggests. We are migrating from OpenLDAP as user authentication to Samba 4 AD Domain. But I can't find any information on how to transfer passwords and users to Samba 4 AD. How to migrate all LDAP user base at ou=People,dc=company,dc=com to samba 4 AD domain? I don't need to assistance transferring everything, I only need to transfer user accounts. I've finished migrating them all but user/passwords. Can it be done? If so, how?

  Read the article

• Cannot schedule task to run under domain user account other than current user

  - by Filburt

  On our Win 2008 machines I can't schedule tasks for domain users because the domain name does not resolve to network name but the AD dc name. The "network name" looks like ABCDEFGE-HIJKLM and the "dc" / "name" would look like ABCDEFGE-HIJKLMN. When selecting the domain user account the account qualifier will look like ABCDEFGE-HIJKLMN\task.user. This results in an "invalid account" error. When however keeping the currently logged in user it will display ABCDEFGE-HIJKLM\current.user. Does this behaviour result from the presumable "illegal" domain name? Is there a workaround for this? update I could of course log in as the desired domain account and create the task but since this account is a account used for running services I want to avoid creating a user profile on the machine.

  Read the article

• Send mail from a distrobution groups email adress

  - by Campo

  A user has send permission on a distro group on a WINDOWS SERVER 2003 domain. I am the admin. When either of us send email using the distrobution groups email adress we get a non delivery report Your message did not reach some or all of the intended recipients. Subject: TEST Sent: 4/19/2010 4:46 PM The following recipient(s) cannot be reached: [email protected] on 4/19/2010 4:46 PM You do not have permission to send to this recipient. For assistance, contact your system administrator. MSEXCH:MSExchangeIS:/DC=local/DC=DOMAIN:SERVERNAME Thanks, JC

  Read the article

• FDE with DiskCryptor V1 (TRIM Support) on Crucial M4 SSD on W7 x64 - Unpartitioned Space?

  - by JamesM

  I have a new Alienware m11 laptop with a brand new Crucial M4 128GB SSD. I have installed the SSD but not used it yet. I am thinking of using FDE with DiskCryptor 1.0.732.111. I will install Win7 Pro x64. I have read about support for TRIM in v1.0.732.111 but also about leaving unpartitioned space. My SSD drive, 'Crucual M4' does not have a manufacturer built-in reserve like other drives. My questions are: Should I leave some free unpartitioned space with v1 of DC and W7x64 even though it will support TRIM or should I not do this? Should I install DC v1 first or after installing Windows 7 (assuming it is brand new, never been used SSD)?

  Read the article

• Send mail from a distribution group's email address

  - by Campo

  A user has send permission on a distro group on a WINDOWS SERVER 2003 domain. I am the admin. When either of us sends email using the distribution group's email adress we get a non delivery report Your message did not reach some or all of the intended recipients. Subject: TEST Sent: 4/19/2010 4:46 PM The following recipient(s) cannot be reached: [email protected] on 4/19/2010 4:46 PM You do not have permission to send to this recipient. For assistance, contact your system administrator. MSEXCH:MSExchangeIS:/DC=local/DC=DOMAIN:SERVERNAME Thanks, JC

  Read the article

• FFmpeg creates emtpy (black) frames

  - by resamsel

  I have a set of images from a timelapse shot (172 JPG files) that I want to convert into a movie. I tried several parameters with FFmpeg, but all I get is a video with black frames (though it has the expected length). ffmpeg -f image2 -vcodec mjpeg -y -i img_%03d.jpg timelapse2.mpg The command above creates this video: http://sdm-net.org/data/timelapse2.mpg What I'm expecting is something like this (created with Time Lapse Assembler.app): https://vimeo.com/39038362 - This is my fallback option, but I'd really like to create timelapse movies from a script. I'm on OSX Lion (10.7.3) with FFmpeg version (0.10) installed via Homebrew. I also tried to find a proper version of mencoder for OSX, but this doesn't seem to be an easy task. Also, ImageMagick's convert doesn't seem to work nicely, it creates really bad output and it seems there's not much I can do about it... Edit: With libx264 and an mp4 container: ffmpeg -f image2 -y -i img_%03d.jpg -vcodec libx264 timelapse4.mp4 Output: ffmpeg version 0.10 Copyright (c) 2000-2012 the FFmpeg developers built on Mar 26 2012 13:47:02 with clang 3.0 (tags/Apple/clang-211.12) configuration: --prefix=/usr/local/Cellar/ffmpeg/0.10 --enable-shared --enable-gpl --enable-version3 --enable-nonfree --enable-hardcoded-tables --enable-libfreetype --cc=/usr/bin/clang --enable-libx264 --enable-libfaac --enable-libmp3lame --enable-librtmp --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libxvid --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libass --disable-ffplay libavutil 51. 34.101 / 51. 34.101 libavcodec 53. 60.100 / 53. 60.100 libavformat 53. 31.100 / 53. 31.100 libavdevice 53. 4.100 / 53. 4.100 libavfilter 2. 60.100 / 2. 60.100 libswscale 2. 1.100 / 2. 1.100 libswresample 0. 6.100 / 0. 6.100 libpostproc 52. 0.100 / 52. 0.100 Input #0, image2, from 'img_%03d.jpg': Duration: 00:00:06.88, start: 0.000000, bitrate: N/A Stream #0:0: Video: mjpeg, yuvj420p, 3888x2592 [SAR 72:72 DAR 3:2], 25 fps, 25 tbr, 25 tbn, 25 tbc [buffer @ 0x7f8ec9415f20] w:3888 h:2592 pixfmt:yuvj420p tb:1/1000000 sar:72/72 sws_param: [libx264 @ 0x7f8ec981d800] using SAR=1/1 [libx264 @ 0x7f8ec981d800] frame MB size (243x162) > level limit (36864) [libx264 @ 0x7f8ec981d800] MB rate (984150) > level limit (983040) [libx264 @ 0x7f8ec981d800] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 AVX [libx264 @ 0x7f8ec981d800] profile High, level 5.1 [libx264 @ 0x7f8ec981d800] 264 - core 120 - H.264/MPEG-4 AVC codec - Copyleft 2003-2011 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mp4, to 'timelapse4.mp4': Metadata: encoder : Lavf53.31.100 Stream #0:0: Video: h264 (![0][0][0] / 0x0021), yuvj420p, 3888x2592 [SAR 72:72 DAR 3:2], q=-1--1, 25 tbn, 25 tbc Stream mapping: Stream #0:0 -> #0:0 (mjpeg -> libx264) Press [q] to stop, [?] for help frame= 172 fps= 18 q=-1.0 Lsize= 259kB time=00:00:06.80 bitrate= 312.3kbits/s video:256kB audio:0kB global headers:0kB muxing overhead 1.089647% [libx264 @ 0x7f8ec981d800] frame I:1 Avg QP: 9.60 size:212820 [libx264 @ 0x7f8ec981d800] frame P:43 Avg QP:30.50 size: 291 [libx264 @ 0x7f8ec981d800] frame B:128 Avg QP:31.00 size: 285 [libx264 @ 0x7f8ec981d800] consecutive B-frames: 0.6% 0.0% 1.7% 97.7% [libx264 @ 0x7f8ec981d800] mb I I16..4: 22.5% 77.2% 0.3% [libx264 @ 0x7f8ec981d800] mb P I16..4: 0.0% 0.0% 0.0% P16..4: 0.0% 0.0% 0.0% 0.0% 0.0% skip:100.0% [libx264 @ 0x7f8ec981d800] mb B I16..4: 0.0% 0.0% 0.0% B16..8: 0.0% 0.0% 0.0% direct: 0.0% skip:100.0% L0: 1.2% L1:98.8% BI: 0.0% [libx264 @ 0x7f8ec981d800] 8x8 transform intra:77.2% inter:100.0% [libx264 @ 0x7f8ec981d800] coded y,uvDC,uvAC intra: 41.2% 23.4% 0.6% inter: 0.0% 0.0% 0.0% [libx264 @ 0x7f8ec981d800] i16 v,h,dc,p: 40% 25% 35% 1% [libx264 @ 0x7f8ec981d800] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 36% 32% 30% 1% 0% 0% 0% 0% 0% [libx264 @ 0x7f8ec981d800] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 51% 40% 6% 1% 1% 0% 1% 0% 1% [libx264 @ 0x7f8ec981d800] i8c dc,h,v,p: 60% 21% 19% 0% [libx264 @ 0x7f8ec981d800] Weighted P-Frames: Y:0.0% UV:0.0% [libx264 @ 0x7f8ec981d800] ref P L0: 92.3% 0.0% 0.0% 7.7% [libx264 @ 0x7f8ec981d800] ref B L0: 50.0% 0.0% 50.0% [libx264 @ 0x7f8ec981d800] ref B L1: 99.4% 0.6% [libx264 @ 0x7f8ec981d800] kb/s:304.49 Output timelapse4.mp4 (beacause of spam protection I can only post two links with my reputation): http sdm-net.org/data/timelapse4.mp4

  Read the article

• Technicolor TG582n with external DHCP server [on hold]

  - by Jack

  We have a small home setup with a Technicolor TG582n on Plusnet ISP. We have a Samba4 DC with DNS forwarding enabled. The DC forwards to the Technicolor. However, the client machines have their DNS settings manually set. This is an annoyance when using laptops on other networks. We would like to have DHCP handled on the server machine, such that when a client connects to the Technicolor, it gets its IP and DNS information from the DHCP server, eliminating the need to manually set adapter DNS settings. However, I cannot find an option to disable DHCP on the Technicolor and am not completely clear on how one would point DHCP services to the server from the Technicolor if there were the option. So, how would one make the Technicolor use an external server for DHCP leases?

  Read the article

• Cannot authenticate a domain user with SQL Server 2008

  - by Sambo

  I'm new to setting up Domains so I might be missing something simple here... I've installed SQL Server 2008 on a Windows Server 2008 R2 box and I have another WS2008 R2 box acting as the domain controller. I've joined the SQL server to the domain and it seems to be behaving itself fine. I can ping the DC by name and IP address. I created a domain user 'SPSQLAdmin' that I want to use for database access with SharePoint but I can't seem to log on to SQL with this user. SQL complains, saying that the user belongs to an untrusted domain. I've configured the DC to delegate control for any service to the SQL Server but it doesn't improve the situation. What should I try next? Thanks in advance.

  Read the article

• How do I set zone priority in Microsoft DNS?

  - by Justin

  I have a standard small network setup (20 users) on Active Directory. All Windows machines have a primary DNS server as the AD and a secondary DNS server as Google PDNS. I want to setup a DNS entry that exists in real DNS but set it up on our DC so that local requests would route this public domain to a local development machine on the network. I setup the zone in DNS which results in the clients resolving the public FQDN to our internal IP. However, sometimes it still resolves to the "real" value (I check by pinging it). Is there some way to give the zone definition in my DC DNS higher priority? Or will the client that has secondary public DNS always at sometimes have a competing entry for this zone?

  Read the article

• Cannot start eventlog service

  - by ANervousTwitch

  On a windows 2k8R2 DC box the eventlog service wont start. When i try to start the service the machine returns: "Windows could not start the Windows Event Log service on Local Computer. Error 13: The data is invalid." event viewer wont open either. obviously, i dont have an event log for this error. ive already tried clearing the event logs. that didnt do anything. the other DC isnt experiencing this issue.

  Read the article

• Exporting a VM running as a Domain Controller

  - by AndyM

  There is a Microsoft KB article that talks about best practices for running a DC on a VM. One of the notes is "Do not use the Export feature on a virtual machine that is running a domain controller". In order to export a VM, the VM needs to be turned off. If you turn off a DC VM, export it, import it on another server and then power the VM back on, there should be no risk as long as the original (exported) VM is never powered back on. Can someone explain to me why this isn't supported? After doing some searching on Google, the sites I found just regurgitated this line from the KB article, but didn't offer any explanation as to why this isn't supported.

  Read the article

• Powershell if statement not working - help!

  - by Dmart

  I have a batch file that takes a computer name as its argument and will install Java JRE on it remotely. Now, Im trying to run this Powershell script to repeatedly call the batch file and install Java on any system that it finds without the latest version. It seems to run error-free, but the statements inside the if code block never seem to run - even when the if conditional test evaluates to true. Can anyone look at this script and point out what I'm possibly missing? I'm using the Quest AD cmdlets, and BSOnPosh module. Thank you. get-qadcomputer -sizelimit 0 -name mypc* -searchroot 'OU=MyComputers,DC=MyDomain,DC=lcl'| test-host -property name |ForEach-Object -process { $targnm = $_.name $tststr=reg query "\\$targnm\HKLM\SOFTWARE\JavaSoft\Java Runtime Environment" /v Java6FamilyVersion if(-not ($tststr | select-string -SimpleMatch '1.6.0_20')) { $mssg="Updating to JRE 6u20 on $targnm" Out-Host $mssg Out-File -filepath c:\install_jre_log.txt -inputobject $mssg -Append cmd /c \\server\apps\java\installjreremote.cmd $targnm } else { $mssg ="JRE 6u20 found on $targnm" Out-Host $mssg Out-File -filepath c:\install_jre_log.txt -inputobject $mssg -Append } }

  Read the article

• Server 2003 Functional Domain DFS Replication Problem (Files being moved to conflicted folder for no reason)

  - by Az

  We have 2 Windows 2003 servers configured with a DFS namespace and we are running into problems with the redirected profiles we have setup. Basically, one server is the FSMO master for all roles, and we have another DC that is the DFS namespace primary server. We have profile redirection setup using the \dfsnamespace\userprofile formula. The FSMO master DC locks up occasionally (don't ask :), and when it does, and we bring it back up... All of the user profiles hosted on the DFS namespace get overwritten when a user logs in. The current profile gets moved to the conflicting and deleted items folder. This strikes me as really odd considering the whole point of using DFS was to provide some redundancy in case one server went down. Can anyone help? Thanks in advance! -Nate

  Read the article

• Domain Controller Placement

  - by Matt

  I've been working through some Exchange training documentation (the official MS e-learning package) and all of the design scenarios allude to placing at least one DC from your forest root domain in every site. I'm not sure whether this just relates to Exchange, but I can think of a number of issues we experience in our forest that would be resolved by this. For example, a Microsoft support engineer has stated that EVERY client in a child domain (i.e. all workstations and member servers) need access to a forest root DC to check certificate/template permissions, even on a subordinate CA. I have attempted to locate documentation or guidelines from Microsoft on this, but have not been able to find anything. I found the Domain Controller Placement guide, but it's only a form - you would use it to document where you will place your DCs, but it doesn't give any guidance on where you should deploy them. Does anyone know where, or if, I can find any such documentation?

  Read the article

• Transferring DHCP using Windows Server Migration Tool - Why is Powershell is crashing on the import of the .mig file?

  - by Mike

  I am migrating DHCP from a windows server 2003R2 DC to a Windows Server 2008R2 DC I've followed this video and its predecessor (Installing Windows Server Migration Tools) http://technet.microsoft.com/en-us/video/migrating-dhcp-using-the-windows-server-2008-r2-migration-tools.aspx I went through everything smoothly until the last step. I have exported a .mig file with my DHCP configuration on the old 2003r2 server. I transferred this .mig file over to my 2008R2 server, when running the import command, it will appear to work for a minute or two and then I get a generic windows "Powershell has stopped working" error and I have to close the program. Under the problem details I see the following: FileVersionOfSystemManagementAutomation: 6.1.7600.16385 InnermostExceptionType: System.AccessViolationException OutermostExceptionType: System.AccessViolationException DeepestPowerShellFrame: unknown OS Version: 6.1.7600.2.0.0.272.7 LocaleID: 1033 Seems like there are permissions issues maybe? I am running powershell as an admin and am logged in to the server as a domain administrator. Any Ideas? Thanks

  Read the article

• Granting access to authzTo attribute

  - by bemace

  I'm trying to grant certain accounts auth access to their authzTo attribute in order to allow proxied authorization. I tried adding this ldif: dn: olcDatabase={-1}frontend,cn=config changetype: modify add: olcAccess olcAccess: {1}to authzTo by dn.children="ou=Special Accounts,dc=example,dc=com" auth - using the command ldapadd -f perm.ldif -D "cn=admin,cn=config" -W but got this error: modifying entry "olcDatabase={-1}frontend,cn=config" ldap_modify: Other (e.g., implementation specific) error (80) additional info: <olcAccess> handler exited with 1 using verbose output and turning up the debug level haven't given me any more clues. Can anyone see what I'm doing wrong?

  Read the article

• Powershell Foreach-Object with if statement not working - help!

  - by Dmart

  I have a batch file that takes a computer name as its argument and will install Java JRE on it remotely. Now, Im trying to run this Powershell script to repeatedly call the batch file and install Java on any system that it finds without the latest version. It seems to run error-free, but the statements inside the if code block never seem to run - even when the if conditional test evaluates to true. Can anyone look at this script and point out what I'm possibly missing? I'm using the Quest AD cmdlets, and BSOnPosh module. Thank you. get-qadcomputer -sizelimit 0 -name mypc* -searchroot 'OU=MyComputers,DC=MyDomain,DC=lcl'| test-host -property name |ForEach-Object -process { $targnm = $_.name $tststr=reg query "\\$targnm\HKLM\SOFTWARE\JavaSoft\Java Runtime Environment" /v Java6FamilyVersion if(-not ($tststr | select-string -SimpleMatch '1.6.0_20')) { $mssg="Updating to JRE 6u20 on $targnm" Out-Host $mssg Out-File -filepath c:\install_jre_log.txt -inputobject $mssg -Append cmd /c \\server\apps\java\installjreremote.cmd $targnm } else { $mssg ="JRE 6u20 found on $targnm" Out-Host $mssg Out-File -filepath c:\install_jre_log.txt -inputobject $mssg -Append } }

  Read the article

• Transfer an account from a 'dead' domain

  - by PJC

  So - following from my previous question: How do I stop DFSR replication preventing a Domain Controller from advertising Domain Services?, I lost the FSMO DC, and my only other DC was in an unrecoverable state. I've created a new domain to continue my testing, but now have an issue which I suspect is relevant to any domain suffering a "catastrophe". I have user accounts and client PCs "on the old domain". (Actually 1 client PC and 3 accounts) I can still sign into the client PC as any of those users on the "dead" domain, because that is cached. There are (thankfully) no encrypted files in the "old" domain. What I would now like to do is migrate the full content (files, preferences, etc) from the "dead" domain to the new "live" domain for any/all user accounts, for the "old" PC. Is there anything out there which can assist me in doing so?

  Read the article

• NIS AD password synch for new accounts

  - by user135004

  I have a Win2k3R2 DC with NIS. All is working well but its no longer synching the passwords for new accounts. When creating a new AD user, NIS does its thing and sends its Unix account to the synched linux server. It's doing everything its supposed to do but not the users password to the server (getent passwd returns the ABCD!efgh12345$67890 password for the new account). Thinking that password synchronization is not working, I changed the password of an existing working account and it synchs the new password. If I delete a new or old AD user, it deletes it on the linked linux server as well. All this tells me that NIS is doing its thing (at least with existing accounts) No updates have been installed on the DC. I am not even sure where to start here.

  Read the article

• Get the "source network address" in Event ID 529 audit entries on Windows XP

  - by Make it useful Keep it simple

  In windows server 2003 when an Event 529 (logon failure) occures with a logon type of 10 (remote logon), the source network IP address is recorded in the event log. On a windows XP machine, this (and some other details) are omitted. If a bot is trying a brute force over RDP (some of my XP machines are (and need to be) exposed with a public IP address), i cannot see the originating IP address so i don't know what to block (with a script i run every few minutes). The DC does not log this detail either when the logon attempt is to the client xp machine and the DC is only asked to authenticate the credentials. Any help getting this detail in the log would be appreciated.

  Read the article

• Direct Access on Server 2012

  - by francisswest

  Scenario: Windows Server 2012 with the Remote Access role installed. IP set to static, registered DNS. 3 domain controllers, all running Server 2003 (I suspect this may be the issue) Done so far: DNS registered, firewall turned off after IPsec was applied. Able to ping all 3 DC's with no issues Problem: Going through the DA wizard generates this error. I am logged in as a domain admin, verified that I can ping the DC, verified IPsec allows me to contact it. Since this version hasnt been readily deployed yet, there isnt much help available online from what I can find. Any assistance ayone could provide would be greatly appreciated. I am still new to the server world as far as things are considered. I would fit, user wise, between Superuser.com and serverfault.com (junior admin) Thanks to anyone who may be able to assist!

  Read the article

• Cannot schedule task for domain user account

  - by Filburt

  On our Win 2008 machines I can't schedule tasks for domain users because the domain name does not resolve to network name but the AD dc name. The "network name" looks like ABCDEFGE-HIJKLM and the "dc" / "name" would look like ABCDEFGE-HIJKLMN. When selecting the domain user account the account qualifier will look like ABCDEFGE-HIJKLMN\task.user. This results in an "invalid account" error. When however keeping the currently logged in user it will display ABCDEFGE-HIJKLM\current.user. Does this behaviour result from the presumable "illegal" domain name? Is there a workaround for this?

  Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >