Search Results

Search found 619 results on 25 pages for 'dig'.

Page 22/25 | < Previous Page | 18 19 20 21 22 23 24 25  | Next Page >

• Top ten things that don't make sense in The Walking Dead

  - by iamjames

  For those of you that don't know, The Walking Dead is a popular American TV show on AMC about a group of people trying to survive in a zombie-filled world.Here's the top ten eleven things that don't make sense on the show (and have never been explained) 1)  They never visit stores.  No Walmarts, Kmarts, Targets, shopping malls, pawn shops, gas stations, etc.  You'd think that would be the first place you'd visit for supplies, but they never have.  Not once.  There was a tiny corner store they visited in a small town, and while many products were already gone they did find several useful items.  2)  They never raid houses.  Why not?  One would imagine that they would want to search houses for useful items, but they don't.3)  They don't use 2 way radios.  Modern 2-way radios have a 36-mile range.  That's probably best possible range, but even if the range is only 10% of that, 3.6 miles, that's still more than enough for most situations, for the occasional "hey zombies attacking can you give me a hand?" or "there's zombies walking by stay inside until they leave" or "remember to pick up milk at the store love mom".  And yes they would need batteries or recharging, but they have been using gas-powered generators on the show and I'm sure a car charger would work.4)  They use gas-guzzling vehicles.  Every vehicle they have is from the 80s or 90s except for the new Kia SUV there for product placement.  Why?  They should all be driving new small SUVs or hybrids.  Visit a dealership and steal more fuel-efficient vehicles, because while the Walmart's might be empty from people raiding them for supplies, I'm sure most people weren't thinking "Gee, I should go car shopping" when the infection hit5)  They drive a motorcycle.  Seriously?  Let's find the least protective vehicle and drive that.  And while motorcycles get reasonable gas mileage, 5 people in a SUV gets better gas mileage per person than 5 people all driving motorcycles so it doesn't make economical sense either.6)  They drive loud vehicles.  The motorcycle used is commonly referred to as a chopper and is about as loud as a motorcycle can get.  The zombies are attracted to loud noise, so wouldn't it make more sense to drive vehicles that makes less sound?  Because as soon as you stop the bike and get off you're surrounded by zombies that heard you coming.  And it's not just the bike, the ~1980s Chevy SUV in the show is also very loud.7)  They never run out of food.  Seems like that would be a almost daily struggle, keeping enough food available for about a dozen people, yet I've never seen them visit a grocery store or local convenience store to stock up.8)  They don't carry swords, machetes, clubs, etc.  Let's face it, biting is not a very effective means of attack.  It's good for animals because they have fangs and little else, but humans have been finding better ways of killing each other since forever.  So why doesn't everyone on the show carry a sword or machete or at least a baseball bat?  Anything is better than wasting valuable bullets all the time.  Sure, dozen zombies approaching?  Shoot them.  One zombie approaching?  Save the bullet, cut off it's head.  9)  They do not wear protective clothing.  Human teeth are not exactly the sharpest teeth in the animal kingdom.  The leather shoes your dog ripped to shreds within minutes would probably take you days to bite through.  So why do they walk around half-naked?  Yes I know it's hot in Atlanta, but you'd think they'd at least have some tough leather coats or something for protection.  Maybe put a few small vent holes in the fabric if it's really hot.  Or better:  make your own chainmail.  Chainmail was used for thousands of years for protection from swords and is still used by scuba divers for protection from sharks.  If swords and sharks can't puncture it, human teeth don't stand a chance.  10)  They don't build barricades or dig trenches around properties.  In Season 2 they stayed at a farm in the middle of no where.  While being far away from people is a great way to stay far away from zombies, it would still make sense to build some sort of defenses.  Hordes of zombies would knock down almost any fence, but what about a trench or moat?  Maybe something not too wide so it can be jumped over easily but a zombie would fall into because I haven't seen too many jumping zombies on the show.  11)  They don't live in a mall or tall office building.  A mall would be perfect.  They have large security gates designed to keep even hundreds of people from breaking in and offer lots of supplies and food.  They're usually hundreds of thousands of square feet and fully enclosed, one could probably live their entire life happily in a mall.  Tall office building with on-site cafeteria would be another good choice.  They also usually offer good security and office furniture could be pushed out of the windows to crush approaching zombies, and the cafeteria is usually stocked to provide food for hundreds or thousands of office workers so food wouldn't be a problem for a long time. So there you have it, eleven things that don't make sense in The Walking Dead.  Have any of your own you'd like to add or were one of these things covered in the show?  Let me know in the comments.

  Read the article

• Agile Development Requires Agile Support

  - by Matt Watson

  Agile developmentAgile development has become the standard methodology for application development. The days of long term planning with giant Gantt waterfall charts and detailed requirements is fading away. For years the product planning process frustrated product owners and businesses because no matter the plan, nothing ever went to plan. Agile development throws the detailed planning out the window and instead focuses on giving developers some basic requirements and pointing them in the right direction. Constant collaboration via quick iterations with the end users, product owners, and the development team helps ensure the project is done correctly.  The various agile development methodologies have helped greatly with creating products faster, but not without causing new problems. Complicated application deployments now occur weekly or monthly. Most of the products are web-based and deployed as a software service model. System performance and availability of these apps becomes mission critical. This is all much different from the old process of mailing new releases of client-server apps on CD once per quarter or year.The steady stream of new products and product enhancements puts a lot of pressure on IT operations to keep up with the software deployments and adding infrastructure capacity. The problem is most operations teams still move slowly thanks to change orders, documentation, procedures, testing and other processes. Operations can slow the process down and push back on the development team in some organizations. The DevOps movement is trying to solve some of these problems by integrating the development and operations teams more together. Rapid change introduces new problemsThe rapid product change ultimately creates some application problems along the way. Higher rates of change increase the likelihood of new application defects. Delivering applications as a software service also means that scalability of applications is critical. Development teams struggle to keep up with application defects and scalability concerns in their applications. Fixing application problems is a never ending job for agile development teams. Fixing problems before your customers do and fixing them quickly is critical. Most companies really struggle with this due to the divide between the development and operations groups. Fixing application problems typically requires querying databases, looking at log files, reviewing config files, reviewing error logs and other similar tasks. It becomes difficult to work on new features when your lead developers are working on defects from the last product version. Developers need more visibilityThe problem is most developers are not given access to see server and application information in the production environments. The operations team doesn’t trust giving all the developers the keys to the kingdom to log in to production and poke around the servers. The challenge is either give them no access, or potentially too much access. Those with access can still waste time figuring out the location of the application and how to connect to it over VPN. In addition, reproducing problems in test environments takes too much time and isn't always possible. System administrators spend a lot of time helping developers track down server information. Most companies give key developers access to all of the production resources so they can help resolve application defects. The problem is only those key people have access and they become a bottleneck. They end up spending 25-50% of their time on a daily basis trying to solve application issues because they are the only ones with access. These key employees’ time is best spent on strategic new projects, not addressing application defects. This job should fall to entry level developers, provided they have access to all the information they need to troubleshoot the problems.The solution to agile application support is giving all the developers limited access to the production environment and all the server information they need to see. Some companies create their own solutions internally to collect log files, centralize errors or other things to address the problem. Some developers even have access to server monitoring or other tools. But they key is giving them access to everything they need so they can see the full picture and giving access to the whole team. Giving access to everyone scales up the application support team and creates collaboration around providing improved application support.Stackify enables agile application supportStackify has created a solution that can give all developers a secure and read only view of the entire production server environment without console or remote desktop access.They provide a web application that provides real time visibility to the important information that developers need to see. An application centric view enables them to see all of their apps across multiple datacenters and environments. They don’t need to know where the application is deployed, just the name of the application to find it and dig in to see more. All your developers can see server health, application health, log files, config files, windows event viewer, deployment history, application notes, and much more. They can receive email and text alerts when problems arise and even safely query your production databases.Stackify enables companies that do agile development to scale up their application support team by getting more team members involved. The lead developers can spend more time on new projects. Application issues can be fixed quicker than ever. Operations can spend less time helping developers collect server information. Agile application support starts with Stackify. Visit Stackify.com to learn more.

  Read the article

• Community Branching

  - by Dane Morgridge

  As some may have noticed, I have taken a liking to Ruby (and Rails in particular) quite a bit recently. This last weekend I spoke at the NYC Code Camp on a comparison of ASP.NET and Rails as well as an intro to Entity Framework talk.  I am speaking at RubyNation in April and have submitted to other ruby conferences around the area and I am also doing a Rails and MongoDB talk at the Philly Code Camp in April. Before you start to think this is my "I'm leaving .NET post", which it isn't so I need to clarify. I am not, nor do I intend to any time in the near future plan on abandoning .NET.  I am simply branching out into another community based on a development technology that I very much enjoy.  If you look at my twitter bio, you will see that I am into Entity Framework, Ruby on Rails, C++ and ASP.NET MVC, and not necessarily in that order.  I know you're probably thinking to your self that I am crazy, which is probably true on several levels (especially the C++ part). I was actually crazy enough at the NYC Code Camp to show up wearing a Linux t-shirt, presenting with my MacBook Pro on Entity Framework, ASP.NET MVC and Rails. (I did get pelted in the head with candy by Rachel Appel for it though) At all of the code camps I am submitting to this year, i will be submitting sessions on likely all four topics, and some sessions will be a combination of 2 or more.  For example, my "ASP.NET MVC: A Gateway To Rails?" talk touches ASP.NET MVC, Entity Framework Code First and Rails. Simply put (and I talk about this in my MVC & Rails talk) is that learning and using Rails has made me a better ASP.NET MVC developer. Just one example of this is helper methods.  When I started working with ASP.NET MVC, I didn't really want to use helpers and preferred to just use standard html tags, especially where links were concerned.  It was just me being stubborn and not really seeing all of the benefit of the helpers.  To my defense, coming from WebForms, I wanted to be as bare metal as possible and it seemed at first like a lot of the helpers were an unnecessary abstraction. I took my first look at Rails back in v1 and didn't spend very much time with it so I dismissed it and went on my merry ASP.NET WebForms way.  Then I picked up ASP.NET MVC and grasped the MVC pattern itself much better. After this, I took another look at Rails and everything made sense.  I decided then to learn Rails. (I think it is important for developers to learn new languages and platforms regularly so it was a natural progression for me) I wanted to learn it the right way, so when I dug into code, everyone used helpers everywhere for pretty much everything possible. I took some time to dig in and found out how helpful they were and subsequently realized how awesome they were in ASP.NET MVC also and started using them. In short, I love Rails (and Ruby in general).  I also love ASP.NET MVC and Entity Framework and yes I still love C++.  I have varying degrees of love for them individually at any given moment and it is likely to shift based on the current project I am working on.  I know you're thinking it so before you ask the question. "Which do I use when?", I'm going to give the standard developer answer of: It depends.  There are a lot of factors that I am not going to even go into that would go into a decision.  The most basic question I would ask though is,  does this project depend on .NET?  If it does, then I'd say that ASP.NET MVC is probably going to be the more logical choice and I am going to leave it at that.  I am working on projects right now in both technologies and I don't see that changing anytime soon (one project even uses both). With all that being said, you'll find me at code camps, conferences and user groups presenting on .NET, Ruby or both, writing about .NET and Ruby and I will likely be blogging on both in the future.  I know of others that have successfully branched out to other communities and with any luck I'll be successful at it too. On a (sorta) side note, I read a post by Justin Etheredge the other day that pretty much sums up my feelings about Ruby as a language.  I highly recommend checking it out: What Is So Great About Ruby?

  Read the article

• Override an IOCTL Handler in PQOAL

  - by Kate Moss' Big Fan

  When porting or creating a BSP to a new platform, we often need to make change to OEMIoControl or HAL IOCTL handler for more specific. Since Microsoft introduced PQOAL in CE 5.0 and more and more BSP today leverages PQOAL to simplify the OAL, we no longer define the OEMIoControl directly. It is somehow analogous to migrate from pure Windows SDK to MFC; people starts to define those MFC handlers and forgot the WinMain and the big message loop. If you ever take a look at the interface between OAL and Kernel, PUBLIC\COMMON\OAK\INC\oemglobal.h, the pfnOEMIoctl is still there just as the entry point of Windows Program is WinMain since day one. (For those may argue about pfnOEMIoctl is not OEMIoControl, I will encourage you to dig into PRIVATE\WINCEOS\COREOS\NK\OEMMAIN\oemglobal.c which initialized pfnOEMIoctl to OEMIoControl. The interface is just to split OAL and Kernel which no longer linked to one executable file in CE 6, all of the function signature is still identical) So let's trace into PQOAL to realize how it implements OEMIoControl and how can we override an IOCTL handler we interest. First thing to know is the entry point (just as finding the WinMain in MFC), OEMIoControl is defined in PLATFORM\COMMON\SRC\COMMON\IOCTL\ioctl.c. Basically, it does nothing special but scan a pre-defined IOCTL table, g_oalIoCtlTable, and then execute the handler. (The highlight part) Other than that is just for error handling and the use of critical section to serialize the function. BOOL OEMIoControl(     DWORD code, VOID *pInBuffer, DWORD inSize, VOID *pOutBuffer, DWORD outSize,     DWORD *pOutSize ) {     BOOL rc = FALSE;     UINT32 i; ...     // Search the IOCTL table for the requested code.     for (i = 0; g_oalIoCtlTable[i].pfnHandler != NULL; i++) {         if (g_oalIoCtlTable[i].code == code) break;     }     // Indicate unsupported code     if (g_oalIoCtlTable[i].pfnHandler == NULL) {         NKSetLastError(ERROR_NOT_SUPPORTED);         OALMSG(OAL_IOCTL, (             L"OEMIoControl: Unsupported Code 0x%x - device 0x%04x func %d\r\n",             code, code >> 16, (code >> 2)&0x0FFF         ));         goto cleanUp;     }            // Take critical section if required (after postinit & no flag)     if (         g_ioctlState.postInit &&         (g_oalIoCtlTable[i].flags & OAL_IOCTL_FLAG_NOCS) == 0     ) {         // Take critical section                    EnterCriticalSection(&g_ioctlState.cs);     }     // Execute the handler     rc = g_oalIoCtlTable[i].pfnHandler(         code, pInBuffer, inSize, pOutBuffer, outSize, pOutSize     );     // Release critical section if it was taken above     if (         g_ioctlState.postInit &&         (g_oalIoCtlTable[i].flags & OAL_IOCTL_FLAG_NOCS) == 0     ) {         // Release critical section                    LeaveCriticalSection(&g_ioctlState.cs);     } cleanUp:     OALMSG(OAL_IOCTL&&OAL_FUNC, (L"-OEMIoControl(rc = %d)\r\n", rc ));     return rc; }   Where is the g_oalIoCtlTable? It is defined in your BSP. Let's use DeviceEmulator BSP as an example. The PLATFORM\DEVICEEMULATOR\SRC\OAL\OALLIB\ioctl.c defines the table as const OAL_IOCTL_HANDLER g_oalIoCtlTable[] = { #include "ioctl_tab.h" }; And that leads to PLATFORM\DEVICEEMULATOR\SRC\INC\ioctl_tab.h which defined some of IOCTL handler but others are defined in oal_ioctl_tab.h which is under PLATFORM\COMMON\SRC\INC\. Finally, we got the full table body! (Just like tracing MFC, always jumping back and forth). The format of table is very straight forward, IOCTL code, Flags and Handler Function // IOCTL CODE,                          Flags   Handler Function //------------------------------------------------------------------------------ { IOCTL_HAL_INITREGISTRY,                   0,  OALIoCtlHalInitRegistry     }, { IOCTL_HAL_INIT_RTC,                       0,  OALIoCtlHalInitRTC          }, { IOCTL_HAL_REBOOT,                         0,  OALIoCtlHalReboot           }, The PQOAL scans through the table until it find a matched IOCTL code, then invokes the handler function. Since it scans the table from the top which means if we define TWO handler with same IOCTL code, the first one is always invoked with no exception. Now back to the PLATFORM\DEVICEEMULATOR\SRC\INC\ioctl_tab.h, with the following table { IOCTL_HAL_INITREGISTRY,                   0,  OALIoCtlDeviceEmulatorHalInitRegistry     }, ... #include <oal_ioctl_tab.h> Note the IOCTL_HAL_INITREGISTRY handler are defined in both BSP's local ioctl_tab.h and the common oal_ioctl_tab.h, but due to BSP's local handler comes before "#include <oal_ioctl_tab.h>" so we know the OALIoCtlDeviceEmulatorHalInitRegistry always get called. In this example, the DeviceEmulator BSP overrides the IOCTL_HAL_INITREGISTRY handler from OALIoCtlHalInitRegistry to OALIoCtlDeviceEmulatorHalInitRegistry by manipulating the g_oalIoCtlTable table. (In some point of view, it is similar to message map in MFC) Please be aware, when you override an IOCTL handler in PQOAL, you may want to clone the original implementation to your BSP and change to meet your need. It is recommended and save you the redundant works but remember to rename the handler function (Just like the DeviceEmulator it changes the name of OALIoCtlHalInitRegistry to OALIoCtlDeviceEmulatorHalInitRegistry). If you don't change the name, linker may not be happy (due to name conflict) and the more important is by using different handler name, you could always redirect the handler back to original one. (It is like the concept of OOP that calling a function in base class; still not so clear? I am goinf to show you soon!) The OALIoCtlDeviceEmulatorHalInitRegistry setups DeviceEmulator specific registry settings and in the end, if everything goes well, it calls the OALIoCtlHalInitRegistry (PLATFORM\COMMON\SRC\COMMON\IOCTL\reginit.c) to do the rest.     if(fOk) {         fOk = OALIoCtlHalInitRegistry(code, pInpBuffer, inpSize, pOutBuffer,             outSize, pOutSize);     } Now you got the picture, whenever you want to override an IOCTL hadnler that is implemented in PQOAL just Clone the handler function to your BSP as a template. Simple name change for the handler function, and a name change in the IOCTL table header file that maps the IOCTL with the function Implement your IOCTL handler and whenever you need to redirect it back just calling the original handler function. It is the standard way of implementing a custom IOCTL and most Microsoft developers prefer. The mapping of IOCTL routine to IOCTL code is platform specific - you control the header file that does that mapping.

  Read the article

• Discover What Powers Your Favorite Websites

  - by Matthew Guay

  Have you ever wondered if the site you’re visiting is powered by WordPress or if the webapp you’re using is powered by Ruby on Rails?  With these extensions for Google Chrome, you’ll never have to wonder again. Geeks love digging under the hood to see what makes their favorite apps and sites tick.  But opening the “View Source” window today doesn’t tell you everything there is to know about a website.  Plus, even if you can tell what CMS is powering a website from its source, it can be tedious to dig through lines of code to find what you’re looking for.  Also, the HTML code never tells you what web server a site is running on or what version of PHP it’s using.  With three extensions for Google Chrome you’ll never have to wonder again.  Note that some sites may not give as much information, but still, you’ll find enough data from most sites to be interesting. Discover Web Frameworks and Javascript Libraries with Chrome Sniffer If you want to know what CMS is powering a site or if it’s using Google Analytics or Quantcast, this is the extension for you.  Chrome Sniffer (link below) identifies over 40 different frameworks, and is constantly adding more.  It shows the logo of the main framework on the site on the left of your address bar.  Here wee see Chrome Sniffer noticed that How-To Geek is powered by WordPress.   Click the logo to see other frameworks on the site.  We can see that the site also has Google Analytics and Quantcast.  If you want more information about the framework, click on its logo and the framework’s homepage will open in a new tab. As another example, we can see that the Tumblr Staff blog is powered by Tumblr (of course), the Discus comment system, Quantcast, and the Prototype JavaScript framework. Or here’s a site that’s powered by Drupal, Google Analytics, Mollom spam protection, and jQuery.  Chrome Sniffer definitely uncovers a lot of neat stuff, so if you’re into web frameworks you’re sure to enjoy this extension. Find Out What Web Server The Site is Running On Want to know whether the site you’re looking at is running on IIS or Appache?  The Web Server Notifier extension for Chrome (link below) lets you easily recognize the web server a site is running on by its favicon on the right of the address bar.  Click the icon to see more information. Some web servers will show you a lot of information about their server, including version, operating system, PHP version, OpenSSL version, and more. Others will simply tell you their name. If the site is powered by IIS, you can usually tell the version of Windows Server its running on since the IIS versions are specific to a version of Windows.  Here we see that Microsoft.com is running on the latest and greatest – Windows Server 2008 R2 with IIS 7.5. Discover Web Technologies Powering Sites Wondering if a webapp is powered by Ruby on Rails or ASP.NET?  The Web Technology Notifier extension for Chrome (link below), from the same developer as the Web Server Notifier, will let you easily discover the backend of a site.  You’ll see the technology’s favicon on the right of your address bar, and, as with the other extension, can get more information by clicking the icon. Here we can see that Backpack from 37signals is powered by the Phusion Passenger module to run Ruby on Rails.   Microsoft’s new Docs.com Office Online apps is powered by ASP.NET…   And How-To Geek has PHP running to power WordPress. Conclusion With all these tools at hand, you can find out a lot about your favorite sites.  For example, with all three extensions we can see that How-To Geek runs on WordPress with PHP, uses Google Analytics and Quantcast, and is served by the LightSpeed web server.  Fun info, huh?   Links Download the Chrome Sniffer extension Download the Web Server Notifier extension Download the Web Technology Notifier extension Similar Articles Productive Geek Tips Enjoy a Clean Start Page with New Tab PageEnjoy Image Zooming on Your Favorite Photo Websites in ChromeAdd Your Own Folders to Favorites in Windows 7Find User Scripts for Your Favorite Websites the Easy WayAdd Social Elements to Your Gmail Contacts with Rapportive TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 tinysong gives a shortened URL for you to post on Twitter (or anywhere) 10 Superb Firefox Wallpapers OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes

  Read the article

• Sound issues after trying everything

  - by Lerp

  I cannot get my sound working properly, no matter what I do, there's always some problem. It's very annoying as it's the only thing preventing me from making Ubuntu my main OS. At the moment my sound always plays through both my speakers and my headphones regardless except the sound through the headphones is crackly. It is also a bit quiet even though everything is maxed. I've managed to improve the situation to a point where the sound out of my speakers is perfect but I have none at all from my headphones. I do have two connectors listed in the sound settings but regardless of which one is selected it always plays through the speakers. I think this might have something to do with the fact that my speakers are plugging into the front of my computer, typically the headphone jack, and my headphones are plugging into the back but when I try disconnecting the speakers from the front there is still no sound from the headphones. I fixed the speaker sound by going through the sound settings and making sure they were all set to 100% then rebooting. Things I have tried: Maxing everything and unmuting everything in alsamixer Uninstalling pulseaudio Making gstreamer use only alsa via gstreamer-properties. This worked with the sound test button including independent sound between headphones and speakers but when I reset the computer it no longer worked. So I tried setting it manually in gconf-editor which didn't work either. Reinstalling alsa and pulseaudio Setting the model in /etc/modprobe.d/alsa-base.conf to 6stack and 6stack-dig neither worked. Upgrading to 12.10 Here's some command output to help you diagnose my problem. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 2: AD198x Headphone [AD198x Headphone] Subdevices: 1/1 Subdevice #0: subdevice #0 sudo lshw -C sound *-multimedia description: Audio device product: 82801JI (ICH10 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:70 memory:f7ff8000-f7ffbfff cat /proc/asound/card*/codec* | grep "Codec" Codec: Analog Devices AD1989B cat /etc/modprobe.d/alsa-base.conf # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 options snd-hda-intel model=6stack

  Read the article

• Thread.Interrupt Is Evil

  - by Alois Kraus

  Recently I have found an interesting issue with Thread.Interrupt during application shutdown. Some application was crashing once a week and we had not really a clue what was the issue. Since it happened not very often it was left as is until we have got some memory dumps during the crash. A memory dump usually means WindDbg which I really like to use (I know I am one of the very few fans of it).  After a quick analysis I did find that the main thread already had exited and the thread with the crash was stuck in a Monitor.Wait. Strange Indeed. Running the application a few thousand times under the debugger would potentially not have shown me what the reason was so I decided to what I call constructive debugging. I did create a simple Console application project and try to simulate the exact circumstances when the crash did happen from the information I have via memory dump and source code reading. The thread that was  crashing was actually MS code from an old version of the Microsoft Caching Application Block. From reading the code I could conclude that the main thread did call the Dispose method on the CacheManger class which did call Thread.Interrupt on the cache scavenger thread which was just waiting for work to do. My first version of the repro looked like this   static void Main(string[] args) { Thread t = new Thread(ThreadFunc) { IsBackground = true, Name = "Test Thread" }; t.Start(); Console.WriteLine("Interrupt Thread"); t.Interrupt(); } static void ThreadFunc() { while (true) { object value = Dequeue(); // block until unblocked or awaken via ThreadInterruptedException } } static object WaitObject = new object(); static object Dequeue() { object lret = "got value"; try { lock (WaitObject) { } } catch (ThreadInterruptedException) { Console.WriteLine("Got ThreadInterruptException"); lret = null; } return lret; } I do start a background thread and call Thread.Interrupt on it and then directly let the application terminate. The thread in the meantime does plenty of Monitor.Enter/Leave calls to simulate work on it. This first version did not crash. So I need to dig deeper. From the memory dump I did know that the finalizer thread was doing just some critical finalizers which were closing file handles. Ok lets add some long running finalizers to the sample. class FinalizableObject : CriticalFinalizerObject { ~FinalizableObject() { Console.WriteLine("Hi we are waiting to finalize now and block the finalizer thread for 5s."); Thread.Sleep(5000); } } class Program { static void Main(string[] args) { FinalizableObject fin = new FinalizableObject(); Thread t = new Thread(ThreadFunc) { IsBackground = true, Name = "Test Thread" }; t.Start(); Console.WriteLine("Interrupt Thread"); t.Interrupt(); GC.KeepAlive(fin); // prevent finalizing it too early // After leaving main the other thread is woken up via Thread.Abort // while we are finalizing. This causes a stackoverflow in the CLR ThreadAbortException handling at this time. } With this changed Main method and a blocking critical finalizer I did get my crash just like the real application. The funny thing is that this is actually a CLR bug. When the main method is left the CLR does suspend all threads except the finalizer thread and declares all objects as garbage. After the normal finalizers were called the critical finalizers are executed to e.g. free OS handles (usually). Remember that I did call Thread.Interrupt as one of the last methods in the Main method. The Interrupt method is actually asynchronous and does wake a thread up and throws a ThreadInterruptedException only once unlike Thread.Abort which does rethrow the exception when an exception handling clause is left. It seems that the CLR does not expect that a frozen thread does wake up again while the critical finalizers are executed. While trying to raise a ThreadInterrupedException the CLR goes down with an stack overflow. Ups not so nice. Why has this nobody noticed for years is my next question. As it turned out this error does only happen on the CLR for .NET 4.0 (x86 and x64). It does not show up in earlier or later versions of the CLR. I have reported this issue on connect here but so far it was not confirmed as a CLR bug. But I would be surprised if my console application was to blame for a stack overflow in my test thread in a Monitor.Wait call. What is the moral of this story? Thread.Abort is evil but Thread.Interrupt is too. It is so evil that even the CLR of .NET 4.0 contains a race condition during the CLR shutdown. When the CLR gurus can get it wrong the chances are high that you get it wrong too when you use this constructs. If you do not believe me see what Patrick Smacchia does blog about Thread.Abort and List.Sort. Not only the CLR creators can get it wrong. The BCL writers do sometimes have a hard time with correct exception handling as well. If you do tell me that you use Thread.Abort frequently and never had problems with it I do suspect that you do not have looked deep enough into your application to find such sporadic errors.

  Read the article

• JavaDay Taipei 2014 Trip Report

  - by reza_rahman

  JavaDay Taipei 2014 was held at the Taipei International Convention Center on August 1st. Organized by Oracle University, it is one of the largest Java developer events in Taiwan. This was another successful year for JavaDay Taipei with a fully sold out venue packed with youthful, energetic developers (this was my second time at the event and I have already been invited to speak again next year!). In addition to Oracle speakers like me, Steve Chin and Naveen Asrani, the event also featured a bevy of local speakers including Taipei Java community leaders. Topics included Java SE, Java EE, JavaFX, cloud and Big Data. It was my pleasure and privilege to present one of the opening keynotes for the event. I presented my session on Java EE titled "JavaEE.Next(): Java EE 7, 8, and Beyond". I covered the changes in Java EE 7 as well as what's coming in Java EE 8. I demoed the Cargo Tracker Java EE BluePrints. I also briefly talked about Adopt-a-JSR for Java EE 8. The slides for the keynote are below (click here to download and view the actual PDF): It appears your Web browser is not configured to display PDF files. No worries, just click here to download the PDF file. In the afternoon I did my JavaScript + Java EE 7 talk titled "Using JavaScript/HTML5 Rich Clients with Java EE 7". This talk is basically about aligning EE 7 with the emerging JavaScript ecosystem (specifically AngularJS). The talk was completely packed. The slide deck for the talk is here: JavaScript/HTML5 Rich Clients Using Java EE 7 from Reza Rahman The demo application code is posted on GitHub. The code should be a helpful resource if this development model is something that interests you. Do let me know if you need help with it but the instructions should be fairly self-explanatory. I am delivering this material at JavaOne 2014 as a two-hour tutorial. This should give me a little more bandwidth to dig a little deeper, especially on the JavaScript end. I finished off Java Day Taipei with my talk titled "Using NoSQL with ~JPA, EclipseLink and Java EE" (this was the last session of the conference). The talk covers an interesting gap that there is surprisingly little material on out there. The talk has three parts -- a birds-eye view of the NoSQL landscape, how to use NoSQL via a JPA centric facade using EclipseLink NoSQL, Hibernate OGM, DataNucleus, Kundera, Easy-Cassandra, etc and how to use NoSQL native APIs in Java EE via CDI. The slides for the talk are here: Using NoSQL with ~JPA, EclipseLink and Java EE from Reza Rahman The JPA based demo is available here, while the CDI based demo is available here. Both demos use MongoDB as the data store. Do let me know if you need help getting the demos up and running. After the event the Oracle University folks hosted a reception in the evening which was very well attended by organizers, speakers and local Java community leaders. I am extremely saddened by the fact that this otherwise excellent trip was scarred by terrible tragedy. After the conference I joined a few folks for a hike on the Maokong Mountain on Saturday. The group included friends in the Taiwanese Java community including Ian and Robbie Cheng. Without warning, fatal tragedy struck on a remote part of the trail. Despite best efforts by us, the excellent Taiwanese Emergency Rescue Team and World class Taiwanese physicians we were unable to save our friend Robbie Cheng's life. Robbie was just thirty-four years old and is survived by his younger brother, mother and father. Being the father of a young child myself, I can only imagine the deep sorrow that this senseless loss unleashes. Robbie was a key member of the Taiwanese Java community and a Java Evangelist at Sun at one point. Ironically the only picture I was able to take of the trail was mere moments before tragedy. I thought I should place him in that picture in profoundly respectful memoriam: Perhaps there is some solace in the fact that there is something inherently honorable in living a bright life, dying young and meeting one's end on a beautiful remote mountain trail few venture to behold let alone attempt to ascend in a long and tired lifetime. Perhaps I'd even say it's a fate I would not entirely regret facing if it were my own. With that thought in mind it seems appropriate to me to quote some lyrics from the song "Runes to My Memory" by legendary Swedish heavy metal band Amon Amarth idealizing a fallen Viking warrior cut down in his prime: "Here I lie on wet sand I will not make it home I clench my sword in my hand Say farewell to those I love When I am dead Lay me in a mound Place my weapons by my side For the journey to Hall up high When I am dead Lay me in a mound Raise a stone for all to see Runes carved to my memory" I submit my deepest condolences to Robbie's family and hope my next trip to Taiwan ends in a less somber note.

  Read the article

• Data Binding to Attached Properties

  - by Chris Gardner

  Originally posted on: http://geekswithblogs.net/freestylecoding/archive/2013/06/14/data-binding-to-attached-properties.aspx When I was working on my C#/XAML game framework, I discovered I wanted to try to data bind my sprites to background objects. That way, I could update my objects and the draw functionality would take care of the work for me. After a little experimenting and web searching, it appeared this concept was an impossible dream. Of course, when has that ever stopped me? In my typical way, I started to massively dive down the rabbit hole. I created a sprite on a canvas, and I bound it to a background object. <Canvas Name="GameField" Background="Black"> <Image Name="PlayerStrite" Source="Assets/Ship.png" Width="50" Height="50" Canvas.Left="{Binding X}" Canvas.Top="{Binding Y}"/> </Canvas> Now, we wire the UI item to the background item. public MainPage() { this.InitializeComponent(); this.Loaded += StartGame; }   void StartGame( object sender, RoutedEventArgs e ) { BindingPlayer _Player = new BindingPlayer(); _Player.X = Window.Current.Bounds.Height - PlayerSprite.Height; _Player.X = ( Window.Current.Bounds.Width - PlayerSprite.Width ) / 2.0; } Of course, now we need to actually have our background object. public class BindingPlayer : INotifyPropertyChanged { private double m_X; public double X { get { return m_X; } set { m_X = value; NotifyPropertyChanged(); } }   private double m_Y; public double Y { get { return m_Y; } set { m_Y = value; NotifyPropertyChanged(); } }   public event PropertyChangedEventHandler PropertyChanged; protected void NotifyPropertyChanged( [CallerMemberName] string p_PropertyName = null ) { if( PropertyChanged != null ) PropertyChanged( this, new PropertyChangedEventArgs( p_PropertyName ) ); } } I fired this baby up, and my sprite was correctly positioned on the screen. Maybe the sky wasn't falling after all. Wouldn't it be great if that was the case? I created some code to allow me to move the sprite, but nothing happened. This seems odd. So, I start debugging the application and stepping through code. Everything appears to be working. Time to dig a little deeper. After much profanity was spewed, I stumbled upon a breakthrough. The code only looked like it was working. What was really happening is that there was an exception being thrown in the background thread that I never saw. Apparently, the key call was the one to PropertyChanged. If PropertyChanged is not called on the UI thread, the UI thread ignores the call. Actually, it throws an exception and the background thread silently crashes. Of course, you'll never see this unless you're looking REALLY carefully. This seemed to be a simple problem. I just need to marshal this to the UI thread. Unfortunately, this object has no knowledge of this mythical UI Thread in which we speak. So, I had to pull the UI Thread out of thin air. Let's change our PropertyChanged call to look this. public event PropertyChangedEventHandler PropertyChanged; protected void NotifyPropertyChanged( [CallerMemberName] string p_PropertyName = null ) { if( PropertyChanged != null ) Windows.ApplicationModel.Core.CoreApplication.MainView.CoreWindow.Dispatcher.RunAsync( Windows.UI.Core.CoreDispatcherPriority.Normal, new Windows.UI.Core.DispatchedHandler( () => { PropertyChanged( this, new PropertyChangedEventArgs( p_PropertyName ) ); } ) ); } Now, we raised our notification on the UI thread. Everything is fine, people are happy, and the world moves on. You may have noticed that I didn't await my call to the dispatcher. This was intentional. If I am trying to update a slew of sprites, I don't want thread being hung while I wait my turn. Thus, I send the message and move on. It is worth nothing that this is NOT the most efficient way to do this for game programming. We'll get to that in another blog post. However, it is perfectly acceptable for a business app that is running a background task that would like to notify the UI thread of progress on a periodic basis. It is worth noting that this code was written for a Windows Store App. You can do the same thing with WP8 and WPF. The call to the marshaler changes, but it is the same idea.

  Read the article

• Extending Expression Blend 4 &amp; Blend for Visual Studio 2012

  - by Chris Skardon

  Just getting this off the bat, I presume this will also work for Blend 5, but I can’t confirm it… Anyhews, I imagine you’re here because you want to know how to create an addin for Blend, so let’s jump right in there! First, and foremost, we’re going to need to ensure our development environment has the right setup, so the checklist: Visual Studio 2012 Blend for Visual Studio 2012 OK, let’s create a new project (class library, .NET 4.5): Hello.Extension The ‘.Extension’ bit is very very important. The addin will not work unless it is named in this way. You can put whatever you want at the front, but it has to have the extension bit. OK, so now we have a solution with one project. To this project we need to add references to the following things: Microsoft.Expression.Extensibility (from c:\program files\Microsoft Visual Studio 11.0\Blend\   -- x86 folder if you are on an x64 windows install) Microsoft.Expression.Framework (same location as above) PresentationCore PresentationFramework WindowsBase System.ComponentModel.Composition Got them? ACE. Let’s now add a project to contain our control, so, create a new WPF Application project, cunningly named something like ‘Hello.Control’… (I’m creating a WPF application here, because I’m too lazy to dig up the correct references, and this will add all the ones I need ) Once that is created, delete the App.xaml and MainWindow.xaml files, we won’t be needing them. You will also need to change the properties of the project itself, so it is only a class library. Once that is done, let’s add a new UserControl, which will be this: <UserControl x:Class="Hello.Control.HelloControl" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="300"> <Grid> <TextBlock Text="HELLO!!!"/> </Grid> </UserControl> Impressive eh? Now, let’s reference the WPF project from the Extension library. All that’s left now is to code up our extension… So, add a class to the Extension project (name wise doesn’t matter), and make it implement the IPackage interface from the Microsoft.Expression.Extensibility library: public class HelloExtension : IPackage { /**/ } We’ll implement the two methods we need to: public class HelloExtension : IPackage { public void Load(IServices services) { } public void Unload() { } } We’re only really concerned about the Load method in this case, as let’s face it, the extension we have doesn’t need to do a lot to bog off. The interesting thing about the Load method is that it receives an IServices instance. This allows us to get access to all the services that Expression provides, in this case we’re interested in one in particular, the ‘IWindowService’ So, let’s get that bad boy… private IWindowService _windowService; public void Load(IServices services) { _windowService = services.GetService<IWindowService>(); } Nailed it… But why? The WindowService allows us to register our UserControl with Blend, which in turn allows people to activate and see it, which is a big plus point. So, let’s do that… We’ll create an ‘Initialize’ method to create our new control, and add it to the WindowService: private HelloControl _helloControl; public void Initialize() { _helloControl = new HelloControl(); if (_windowService.PaletteRegistry["HelloPanel"] == null) _windowService.RegisterPalette("HelloPanel", _helloControl, "Hello Window"); } First we check that we’re not already registered, and if we’re not we register, the first argument is the identifier used by the service to, well, identify your extension. The second argument is the actual control, the third argument is the name that people will see in the ‘Windows’ menu of Blend itself (so important note here – don’t put anything embarrassing or (need I say it?) sweary…) There are only two things to do now - Call ‘Initialize()’ from our Load method, and Export the class This is easy money – add [Export(typeof(IPackage))] to the top of our class… The full code will (should) look like this: [Export(typeof (IPackage))] public class HelloExtension : IPackage { private HelloControl _helloControl; private IWindowService _windowService; public void Load(IServices services) { _windowService = services.GetService<IWindowService>(); Initialize(); } public void Unload() { } public void Initialize() { _helloControl = new HelloControl(); if (_windowService.PaletteRegistry["HelloControl"] == null) _windowService.RegisterPalette("HelloControl", _helloControl, "Hello Window"); } } If you build this and copy it to your ‘Extensions’ folder in Blend (c:\program files\microsoft visual studio 11.0\blend\) and start Blend, you should see ‘Hello Window’ listed in the Window menu: That as they say is it!

  Read the article

• Key Windows Phone Development Concepts

  - by Tim Murphy

  As I am doing more development in and out of the enterprise arena for Windows Phone I decide I would study for the 70-599 test.  I generally take certification tests as a way to force me to dig deeper into a technology.  Between the development and studying I decided it would be good to put a post together of key development features in Windows Phone 7 environment.  Contrary to popular belief the launch of Windows Phone 8 will not obsolete Windows Phone 7 development.  With the launch of 7.8 coming shortly and people who will remain on 7.X for the foreseeable future there are still consumers needing these apps so don’t throw out the baby with the bath water. PhoneApplicationService This is a class that every Windows Phone developer needs to become familiar with.  When it comes to application state this is your go to repository.  It also contains events that help with management of your application’s lifecycle.  You can access it like the following code sample. 1: PhoneApplicationService.Current.State["ValidUser"] = userResult; DeviceNetworkInformation This class allows you to determine the connectivity of the device and be notified when something changes with that connectivity.  If you are making web service calls you will want to check here before firing off. I have found that this class doesn’t actually work very well for determining if you have internet access.  You are better of using the following code where IsConnectedToInternet is an App level property. private void Application_Launching(object sender, LaunchingEventArgs e){ // Validate user access if (Microsoft.Phone.Net.NetworkInformation.NetworkInterface.NetworkInterfaceType != Microsoft.Phone.Net.NetworkInformation.NetworkInterfaceType.None) { IsConnectedToInternet = true; } else { IsConnectedToInternet = false; } NetworkChange.NetworkAddressChanged += new NetworkAddressChangedEventHandler(NetworkChange_NetworkAddressChanged);}void NetworkChange_NetworkAddressChanged(object sender, EventArgs e){ IsConnectedToInternet = (Microsoft.Phone.Net.NetworkInformation.NetworkInterface.NetworkInterfaceType != Microsoft.Phone.Net.NetworkInformation.NetworkInterfaceType.None);} Push Notification Push notification allows your application to receive notifications in a way that reduces the application’s power needs. This MSDN article is a good place to get the basics of push notification, but you can see the essential concept in the diagram below.  There are three types of push notification: toast, Tile and raw.  The first two work regardless of the state of the application where as raw messages are discarded if your application is not running.   Live Tiles Live tiles are one of the main differentiators of the Windows Phone platform.  They allow users to find information at a glance from their start screen without navigating into individual apps.  Knowing how to implement them can be a great boost to the attractiveness of your application. The simplest step-by-step explanation for creating live tiles is here. Local Database While your application really only has Isolated Storage as a data store there are some ways of giving you database functionality to develop against.  There are a number of open source ORM style solutions.  Probably the best and most native way I have found is to use LINQ to SQL.  It does take a significant amount of setup, but the ease of use once it is configured is worth the cost.  Rather than repeat the full concepts here I will point you to a post that I wrote previously. Tasks (Bing, Email) Leveraging built in features of the Windows Phone platform is an easy way to add functionality that would be expensive to develop on your own.  The classes that you need to make yourself familiar with are BingMapsDirectionsTask and EmailComposeTask.  This will allow your application to supply directions and give the user an email path to relay information to friends and associates. Event model Because of the ability for users to switch quickly to switch to other apps or the home screen is just one reason why knowing the Windows Phone event model is important.  You need to be able to save data so that if a user gets a phone call they can come back to exactly where they were in your application.  This means that you will need to handle such events as Launching, Activated, Deactivated and Closing at an application level.  You will probably also want to get familiar with the OnNavigatedTo and OnNavigatedFrom events at the page level.  These will give you an opportunity to save data as a user navigates through your app. Summary This is just a small portion of the concepts that you will use while building Windows Phone apps, but these are some of the most critical.  With the launch of Windows Phone 8 this list will probably expand.  Take the time to investigate these topics further and try them out in your apps. del.icio.us Tags: Windows Phone 7,Windows Phone,WP7,Software Development,70-599

  Read the article

• Custom page sizes in paging dropdown in Telerik RadGrid

  Working with Telerik RadControls for ASP.NET AJAX is actually quite easy and the initial effort to get started with the control suite is very low. Meaning that you can easily get good result with little time. But there are usually cases where you have to go a little further and dig a little bit deeper than the standard scenarios. In this article I am going to describe how you can customize the default values (10, 20 and 50) of the drop-down list in the paging element of RadGrid. Get control over the displayed page sizes while using numeric paging... The default page sizes are good but not always good enough The paging feature in RadGrid offers you 3, well actually 4, possible page sizes in the drop-down element out-of-the box, which are 10, 20 or 50 items. You can get a fourth option by specifying a value different than the three standards for the PageSize attribute, ie. 35 or 100. The drawback in that case is that it is the initial page size. Certainly, the available choices could be more flexible or even a little bit more intelligent. For example, by taking the total count of records into consideration. There are some interesting scenarios that would justify a customized page size element: A low number of records, like 14 or similar shouldn't provide a page size of 50, A high total count of records (ie: 300+) should offer more choices, ie: 100, 200, 500, or display of all records regardless of number of records I am sure that you might have your own requirements, and I hope that the following source code snippets might be helpful. Wiring the ItemCreated event In order to adjust and manipulate the existing RadComboBox in the paging element we have to handle the OnItemCreated event of RadGrid. Simply specify your code behind method in the attribute of the RadGrid tag, like so: <telerik:RadGrid ID="RadGridLive" runat="server" AllowPaging="true" PageSize="20"    AllowSorting="true" AutoGenerateColumns="false" OnNeedDataSource="RadGridLive_NeedDataSource"    OnItemDataBound="RadGrid_ItemDataBound" OnItemCreated="RadGrid_ItemCreated">    <ClientSettings EnableRowHoverStyle="true">        <ClientEvents OnRowCreated="RowCreated" OnRowSelected="RowSelected" />        <Resizing AllowColumnResize="True" AllowRowResize="false" ResizeGridOnColumnResize="false"            ClipCellContentOnResize="true" EnableRealTimeResize="false" AllowResizeToFit="true" />        <Scrolling AllowScroll="true" ScrollHeight="360px" UseStaticHeaders="true" SaveScrollPosition="true" />        <Selecting AllowRowSelect="true" />    </ClientSettings>    <MasterTableView DataKeyNames="AdvertID">        <PagerStyle AlwaysVisible="true" Mode="NextPrevAndNumeric" />        <Columns>            <telerik:GridBoundColumn HeaderText="Listing ID" DataField="AdvertID" DataType="System.Int32"                SortExpression="AdvertID" UniqueName="AdvertID">                <HeaderStyle Width="66px" />            </telerik:GridBoundColumn>             <!--//  ... and some more columns ... -->         </Columns>    </MasterTableView></telerik:RadGrid> To provide a consistent experience for your visitors it might be helpful to display the page size selection always. This is done by setting the AlwaysVisible attribute of the PagerStyle element to true, like highlighted above. Customize the values of page size Your delegate method for the ItemCreated event should look like this: protected void RadGrid_ItemCreated(object sender, GridItemEventArgs e){    if (e.Item is GridPagerItem)    {        var dropDown = (RadComboBox)e.Item.FindControl("PageSizeComboBox");        var totalCount = ((GridPagerItem)e.Item).Paging.DataSourceCount;        var sizes = new Dictionary<string, string>() {            {"10", "10"},            {"20", "20"},            {"50", "50"}        };        if (totalCount > 100)        {            sizes.Add("100", "100");        }        if (totalCount > 200)        {            sizes.Add("200", "200");        }        sizes.Add("All", totalCount.ToString());        dropDown.Items.Clear();        foreach (var size in sizes)        {            var cboItem = new RadComboBoxItem() { Text = size.Key, Value = size.Value };            cboItem.Attributes.Add("ownerTableViewId", e.Item.OwnerTableView.ClientID);            dropDown.Items.Add(cboItem);        }        dropDown.FindItemByValue(e.Item.OwnerTableView.PageSize.ToString()).Selected = true;    }} It is important that we explicitly check the event arguments for GridPagerItem as it is the control that contains the PageSizeComboBox control that we want to manipulate. To keep the actual modification and exposure of possible page size values flexible I am filling a Dictionary with the requested 'key/value'-pairs based on the number of total records displayed in the grid. As a final step, ensure that the previously selected value is the active one using the FindItemByValue() method. Of course, there might be different requirements but I hope that the snippet above provide a first insight into customized page size value in Telerik's Grid. The Grid demos describe a more advanced approach to customize the Pager.

  Read the article

• Why is ListBoxFor not selecting items, but ListBox is?

  - by Roger Rogers

  I have the following code in my view: <%= Html.ListBoxFor(c => c.Project.Categories, new MultiSelectList(Model.Categories, "Id", "Name", new List<int> { 1, 2 }))%> <%= Html.ListBox("MultiSelectList", new MultiSelectList(Model.Categories, "Id", "Name", new List<int> { 1, 2 }))%> The only difference is that the first helper is strongly typed (ListBoxFor), and it fails to show the selected items (1,2), even though the items appear in the list, etc. The simpler ListBox is working as expected. I'm obviously missing something here. I can use the second approach, but this is really bugging me and I'd like to figure it out. For reference, my model is: public class ProjectEditModel { public Project Project { get; set; } public IEnumerable<Project> Projects { get; set; } public IEnumerable<Client> Clients { get; set; } public IEnumerable<Category> Categories { get; set; } public IEnumerable<Tag> Tags { get; set; } public ProjectSlide SelectedSlide { get; set; } } Update I just changed the ListBox name to Project.Categories (matching my model) and it now FAILS to select the item. <%= Html.ListBox("Project.Categories", new MultiSelectList(Model.Categories, "Id", "Name", new List<int> { 1, 2 }))%> I'm obviously not understanding the magic that is happening here. Update 2 Ok, this is purely naming, for example, this works... <%= Html.ListBox("Project_Tags", new MultiSelectList(Model.Tags, "Id", "Name", Model.Project.Tags.Select(t => t.Id)))%> ...because the field name is Project_Tags, not Project.Tags, in fact, anything other than Tags or Project.Tags will work. I don't get why this would cause a problem (other than that it matches the entity name), and I'm not good enough at this to be able to dig in and find out.

  Read the article

• Personal Project - Next practical language/tech to learn

  - by Paul Nathan

  I'm working on a personal project doing some finance analysis. It's a totally new field for me, and I'm really having fun with it so far, plus working in the high-level language arena is a great break from my embedded systems daytime work. I have a MySQL backend on a non-local server with a pile of stock data. My task now is to do some analysis of the stocks and produce something approximating a useful result. There are a couple technical difficulties. (1) I have a lot of records. To be precise, I believe I'm near 100K records right now, and this number grows by 6.1K each weekday. I need to create a way to rummage through these fields and do data analysis - based on a given computation, go look at this other set. Fine and dandy, nothing too outre. But this means I could really use a straightforward API for talking to MySQL. (2) Ideally, it runs on OS X 10.4.11. No Windows/Linux machine at home. (3) I can use PHP, C++, Perl, etc. I even have an R installation. I'm pretty flexible with stuff, so long as it runs on OS X. (Lots of options here, pick water, H20, or dihydrogen monoxide ;-) ) (4)Lack of hassle. While I like clever and fun ways of doing things, I'm trying to get some analysis done, not spend ten hours doing installation work and scratching my head figuring out a theoretical syntax question needed to spout out "hello world". What's the question? I'd like to dig into something different than my usual PHP/C++/C toolset. I'm looking for recommendations for languages/technologies that will assist me and meet the above requirements. In particular, I've heard a lot of buzz about F# and Python on SO. I've used CLISP for small problems before, and kinda liked it. I'm seeking opinions about those in particular. edit:since I rent the DB server and have a limited amount of CPU time online, I'm trying to do the analysis on a local machine.

  Read the article

• Reading xml within xml as String in flex/AS3

  - by duder

  I'm getting XML input that looks like this <?xml version="1.0" encoding="utf-8"?> <data1>this is data 1</data1> <data2>this is data 2</data2> <data3> <3a>this is data 3a</3a> <3b>this is data 3b</3b> <3c> <TextFlow xmlns="http://ns.adobe.com/textLayout/2008"> <p direction="ltr" > <span>some text</span> <span>some additional text</span> </p> <p direction="ltr"> <span>some text</span> <span>some additional text</span> </p> </TextFlow> </3c> </data3> I can read <data1> with event.result.data1 which outputs a string this is data1 But when I do the same thing to event.result.data3.3c, it prints object [object] so I guess it's trying to dig deeper into the tree. But I need the actual string text (not xml tree) starting from and including <TextFlow></TextFlow> to be stored and printed as a string. Any idea what's the syntax for this? The string I'm looking for would look like this: <TextFlow xmlns="http://ns.adobe.com/textLayout/2008"> <p direction="ltr" > <span>some text</span> <span>some additional text</span> </p> <p direction="ltr"> <span>some text</span> <span>some additional text</span> </p> </TextFlow>

  Read the article

• PHP mysqli wrapper: passing by reference with __call() and call_user_func_array()

  - by Dave

  Hi everyone. I'm a long running fan of stackoverflow, first time poster. I'd love to see if someone can help me with this. Let me dig in with a little code, then I'll explain my problem. I have the following wrapper classes: class mysqli_wrapper { private static $mysqli_obj; function __construct() // Recycles the mysqli object { if (!isset(self::$mysqli_obj)) { self::$mysqli_obj = new mysqli(MYSQL_SERVER, MYSQL_USER, MYSQL_PASS, MYSQL_DBNAME); } } function __call($method, $args) { return call_user_func_array(array(self::$mysqli_obj, $method), $args); } function __get($para) { return self::$mysqli_obj->$para; } function prepare($query) // Overloaded, returns statement wrapper { return new mysqli_stmt_wrapper(self::$mysqli_obj, $query); } } class mysqli_stmt_wrapper { private $stmt_obj; function __construct($link, $query) { $this->stmt_obj = mysqli_prepare($link, $query); } function __call($method, $args) { return call_user_func_array(array($this->stmt_obj, $method), $args); } function __get($para) { return $this->stmt_obj->$para; } // Other methods will be added here } My problem is that when I call bind_result() on the mysqli_stmt_wrapper class, my variables don't seem to be passed by reference and nothing gets returned. To illustrate, if I run this section of code, I only get NULL's: $mysqli = new mysqli_wrapper; $stmt = $mysqli->prepare("SELECT cfg_key, cfg_value FROM config"); $stmt->execute(); $stmt->bind_result($cfg_key, $cfg_value); while ($stmt->fetch()) { var_dump($cfg_key); var_dump($cfg_value); } $stmt->close(); I also get a nice error from PHP which tells me: PHP Warning: Parameter 1 to mysqli_stmt::bind_result() expected to be a reference, value given in test.php on line 48 I've tried to overload the bind_param() function, but I can't figure out how to get a variable number of arguments by reference. func_get_args() doesn't seem to be able to help either. If I pass the variables by reference as in $stmt->bind_result(&$cfg_key, &$cfg_value) it should work, but this is deprecated behaviour and throws more errors. Does anyone have some ideas around this? Thanks so much for your time.

  Read the article

• Strange iPhone memory leak in xml parser

  - by Chris

  Update: I edited the code, but the problem persists... Hi everyone, this is my first post here - I found this place a great ressource for solving many of my questions. Normally I try my best to fix anything on my own but this time I really have no idea what goes wrong, so I hope someone can help me out. I am building an iPhone app that parses a couple of xml files using TouchXML. I have a class XMLParser, which takes care of downloading and parsing the results. I am getting memory leaks when I parse an xml file more than once with the same instance of XMLParser. Here is one of the parsing snippets (just the relevant part): for(int counter = 0; counter < [item childCount]; counter++) { CXMLNode *child = [item childAtIndex:counter]; if([[child name] isEqualToString:@"PRODUCT"]) { NSMutableDictionary *product = [[NSMutableDictionary alloc] init]; for(int j = 0; j < [child childCount]; j++) { CXMLNode *grandchild = [child childAtIndex:j]; if([[grandchild stringValue] length] > 1) { NSString *trimmedString = [[grandchild stringValue] stringByTrimmingCharactersInSet:[NSCharacterSet whitespaceAndNewlineCharacterSet]]; [product setObject:trimmedString forKey:[grandchild name]]; } } // Add product to current category array switch (categoryId) { case 0: [self.mobil addObject: product]; break; case 1: [self.allgemein addObject: product]; break; case 2: [self.besitzeIch addObject: product]; break; case 3: [self.willIch addObject: product]; break; default: break; } [product release]; } } The first time, I parse the xml no leak shows up in instruments, the next time I do so, I got a lot of leaks (NSCFString / NSCFDictionary). Instruments points me to this part inside CXMLNode.m, when I dig into a leaked object: theStringValue = [NSString stringWithUTF8String:(const char *)theXMLString]; if ( _node->type != CXMLTextKind ) xmlFree(theXMLString); } return(theStringValue); I really spent a long time and tried multiple approaches to fix this, but to no avail so far, maybe I am missing something essential? Any help is highly appreciated, thank you!

  Read the article

• (resolved) empty response body in ajax (or 206 Partial Content)

  - by Nikita Rybak

  Hi guys, I'm feeling completely stupid because I've spent two hours solving task which should be very simple and which I solved many times before. But now I'm not even sure in which direction to dig. I fail to fetch static content using ajax from local servers (Apache and Mongrel). I get responses 200 and 206 (depending on the server), empty response text (although Content-Length header is always correct), firebug shows request in red. Javascript is very generic, I'm getting same results even here: http://www.w3schools.com/ajax/tryit.asp?filename=tryajax_first (just change document location to 'http://localhost:3000/whatever') So, it's probably not the cause. Well, now I'm out of ideas. I can also post http headers, if it'll help. Thanks! Response Headers Connection close Date Sat, 01 May 2010 21:05:23 GMT Last-Modified Sun, 18 Apr 2010 19:33:26 GMT Content-Type text/html Content-Length 7466 Request Headers Host localhost:3000 User-Agent Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 115 Connection keep-alive Referer http://www.w3schools.com/ajax/tryit_view.asp Origin http://www.w3schools.com Response Headers Date Sat, 01 May 2010 21:54:59 GMT Server Apache/2.2.14 (Unix) mod_ssl/2.2.14 OpenSSL/0.9.8l DAV/2 mod_jk/1.2.28 Etag "3d5cbdb-fb4-4819c460d4a40" Accept-Ranges bytes Content-Length 4020 Cache-Control max-age=7200, public, proxy-revalidate Expires Sat, 01 May 2010 23:54:59 GMT Content-Range bytes 0-4019/4020 Keep-Alive timeout=5, max=100 Connection Keep-Alive Content-Type application/javascript Request Headers Host localhost User-Agent Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 115 Connection keep-alive Origin null UPDATED: I've found a problem, it was about cross-domain requests. I knew that there are restrictions, but thought they're relaxed for local filesystem and local servers. (and expected more descriptive error message, anyway) Thanks everybody!

  Read the article

• Consolidating coding styles: Funcs, private method, single method classes

  - by jdoig

  Hi all, We currently have 3 devs with, some, conflicting styles and I'm looking for a way to bring peace to the kingdom... The Coders: Foo 1: Likes to use Func's & Action's inside public methods. He uses actions to alias off lengthy method calls and Func's to perform simple tasks that can be expressed in 1 or 2 lines and will be used frequently through out the code Pros: The main body of his code is succinct and very readable, often with only one or 2 public methods per class and rarely any private methods. Cons: The start of methods contain blocks of lambda rich code that other developers don't enjoy reading; and, on occasion, can contain higher order functions that other dev's REALLY don't like reading. Foo 2: Likes to create a private method for (almost) everything the public method will have to do . Pros: Public methods remain small and readable (to all developers). Cons: Private methods are numerous. With private methods that call into other private methods, that call into... etc, etc. Making code hard to navigate. Foo 3: Likes to create a public class with a, single, public method for every, non-trivial, task that needs performing, then dependency inject them into other objects. Pros: Easily testable, easy to understand (one object, one responsibility). Cons: project gets littered by classes, opening multiple class files to understand what code does makes navigation awkward. It would be great to take the best of all these techniques... Foo-1 Has really nice, readable (almost dsl-like) code... for the most part, except for all the Action and Func lambda shenanigans bulked together at the start of a method. Foo-3 Has highly testable and extensible code that just feels a bit "belt-&-braces" for some solutions and has some code-navigation niggles (constantly hitting F12 in VS and opening 5 other .cs files to find out what a single method does). And Foo-2... Well I'm not sure I like anything about the one-huge .cs file with 2 public methods and 12 private ones, except for the fact it's easier for juniors to dig into. I admit I grossly over-simplified the explanations of those coding styles; but if any one knows of any patterns, practices or diplomatic-manoeuvres that can help unite our three developers (without just telling any of them to just "stop it!") that would be great. From a feasibility standpoint : Foo-1's style meets with the most resistance due to some developers finding lambda and/or Func's hard to read. Foo-2's style meets with a less resistance as it's just so easy to fall into. Foo-3's style requires the most forward thinking and is difficult to enforce when time is short. Any ideas on some coding styles or conventions that can make this work?

  Read the article

• How to properly downcast in C# with a SWIG generated interface?

  - by JG

  I've got a very large and mature C++ code base that I'm trying to use SWIG on to generate a C# interface for. I cannot change the actual C++ code itself but we can use whatever SWIG offers in the way of extending/updating it. I'm facing an issue where a function C++ is written as such: A* SomeClass::next(A*) The caller might do something like: A* acurr = 0; while( (acurr = sc->next(acurr)) != 0 ){ if( acurr isoftype B ){ B* b = (B*)a; ...do some stuff with b.. } elseif( acurr isoftype C ) ... } Essentially, iterating through a container elements that depending on their true type, do something different. The SWIG generated C# layer for the "next" function unfortunately does the following: return new A(); So the calling code in C# land cannot determine if the returned object is actually a derived class or not, it actually appears to always be the base class (which does make sense). I've come across several solutions: Use the %extend SWIG keyword to add a method on an object and ultimately call dynamic_cast. The downside to this approach, as I see it, is that this requires you to know the inheritance hierarchy. In my case it is rather huge and I see this is as a maintenance issue. Use the %factory keyword to supply the method and the derived types and have SWIG automatically generate the dynamic_cast code. This appears to be a better solution that the first, however upon a deeper look it still requires you to hunt down all the methods and all the possible derived types it could return. Again, a huge maintenance issue. I wish I had a doc link for this but I can't find one. I found out about this functionality by looking through the example code that comes with SWIG. Create a C# method to create an instance of the derived object and transfer the cPtr to the new instance. While I consider this clumsy, it does work. See an example below. public static object castTo(object fromObj, Type toType) { object retval = null; BaseClass fromObj2 = fromObj as BaseClass; HandleRef hr = BaseClass.getCPtr(fromObj2); IntPtr cPtr = hr.Handle; object toObj = Activator.CreateInstance(toType, cPtr, false); // make sure it actually is what we think it is if (fromObj.GetType().IsInstanceOfType(toObj)) { return toObj; } return retval; } Are these really the options? And if I'm not willing to dig through all the existing functions and class derivations, then I'm left with #3? Any help would be appreciated.

  Read the article

• Strange problem publishing a fresh Ruby on Rails 3 application on localhost (Apache, Passenger and VirtualHosts)

  - by user502052

  I recently created a new Ruby on Rails 3 application locally on a Mac OS, named "test". Since I use apache2, in the private/etc/apache2/httpd.conf I set the VirtualHost for the "test" application: <VirtualHost *:443> ServerName test.pjtmain.localhost:443 DocumentRoot "/Users/<my_user_name>/Sites/test/public" RackEnv development <Directory "/Users/<my_user_name>/Sites/test/public"> Order allow,deny Allow from all </Directory> # SSL Configuration SSLEngine on ... </VirtualHost> <VirtualHost *:80> ServerName test.pjtmain.localhost DocumentRoot "/Users/<my_user_name>/Sites/test/public" RackEnv development <Directory "/Users/<my_user_name>/Sites/test/public"> Order allow,deny Allow from all </Directory> </VirtualHost> Of course I restart apache2, but trying to access to http://test.pjtmain.localhost/ I have this error message from: FIREFOX Oops! Firefox could not find test.pjtmain.localhost Suggestions: * Search on Google: ... SAFARI Safari can’t find the server. Safari can’t open the page “http://test.pjtmain.localhost/” because Safari can’t find the server “test.pjtmain.localhost”. I have other RoR3 applications setted like that above in the httpd.conf file and all them work. What is the problem (maybe it is not related to apache...)? Notes: 1. Using the 'Network Uility' I did a Ping with the following result: ping: cannot resolve test.pjtmain.localhost: Unknown host and I did a Lookup with the follonwing result: ; <<>> DiG 9.6.0-APPLE-P2 <<>> test.pjtmain.localhost +multiline +nocomments +nocmd +noquestion +nostats +search ;; global options: +cmd <MY_BROADBAND_TELECOMUNICATIONS_COMPANY_NAME>.com. 115 IN SOA dns1.<MY_BROADBAND_TELECOMUNICATIONS_COMPANY_NAME>.com. dnsmaster.<MY_BROADBAND_TELECOMUNICATIONS_COMPANY_NAME>.com. ( 2010110500 ; serial 10800 ; refresh (3 hours) 900 ; retry (15 minutes) 604800 ; expire (1 week) 86400 ; minimum (1 day) ) 2. I am using Phusion Passenger 3. Since I not changed nothing to the new "test" application, I expect to see the default RoR index.html page: 4. It seems that in the 'Console Messages' there is any warning or error

  Read the article

• How does Sentry aggregate errors?

  - by Hugo Rodger-Brown

  I am using Sentry (in a django project), and I'd like to know how I can get the errors to aggregate properly. I am logging certain user actions as errors, so there is no underlying system exception, and am using the culprit attribute to set a friendly error name. The message is templated, and contains a common message ("User 'x' was unable to perform action because 'y'"), but is never exactly the same (different users, different conditions). Sentry clearly uses some set of attributes under the hood to determine whether to aggregate errors as the same exception, but despite having looked through the code, I can't work out how. Can anyone short-cut my having to dig further into the code and tell me what properties I need to set in order to manage aggregation as I would like? [UPDATE 1: event grouping] This line appears in sentry.models.Group: class Group(MessageBase): """ Aggregated message which summarizes a set of Events. """ ... class Meta: unique_together = (('project', 'logger', 'culprit', 'checksum'),) ... Which makes sense - project, logger and culprit I am setting at the moment - the problem is checksum. I will investigate further, however 'checksum' suggests that binary equivalence, which is never going to work - it must be possible to group instances of the same exception, with differenct attributes? [UPDATE 2: event checksums] The event checksum comes from the sentry.manager.get_checksum_from_event method: def get_checksum_from_event(event): for interface in event.interfaces.itervalues(): result = interface.get_hash() if result: hash = hashlib.md5() for r in result: hash.update(to_string(r)) return hash.hexdigest() return hashlib.md5(to_string(event.message)).hexdigest() Next stop - where do the event interfaces come from? [UPDATE 3: event interfaces] I have worked out that interfaces refer to the standard mechanism for describing data passed into sentry events, and that I am using the standard sentry.interfaces.Message and sentry.interfaces.User interfaces. Both of these will contain different data depending on the exception instance - and so a checksum will never match. Is there any way that I can exclude these from the checksum calculation? (Or at least the User interface value, as that has to be different - the Message interface value I could standardise.) [UPDATE 4: solution] Here are the two get_hash functions for the Message and User interfaces respectively: # sentry.interfaces.Message def get_hash(self): return [self.message] # sentry.interfaces.User def get_hash(self): return [] Looking at these two, only the Message.get_hash interface will return a value that is picked up by the get_checksum_for_event method, and so this is the one that will be returned (hashed etc.) The net effect of this is that the the checksum is evaluated on the message alone - which in theory means that I can standardise the message and keep the user definition unique. I've answered my own question here, but hopefully my investigation is of use to others having the same problem. (As an aside, I've also submitted a pull request against the Sentry documentation as part of this ;-)) (Note to anyone using / extending Sentry with custom interfaces - if you want to avoid your interface being use to group exceptions, return an empty list.)

  Read the article

• How can I map a String to a function in Java?

  - by Bears will eat you

  Currently, I have a bunch of Java classes that implement a Processor interface, meaning they all have a processRequest(String key) method. The idea is that each class has a few (say, <10) member Strings, and each of those maps to a method in that class via the processRequest method, like so: class FooProcessor implements Processor { String key1 = "abc"; String key2 = "def"; String key3 = "ghi"; // and so on... String processRequest(String key) { String toReturn = null; if (key1.equals(key)) toReturn = method1(); else if (key2.equals(key)) toReturn = method2(); else if (key3.equals(key)) toReturn = method3(); // and so on... return toReturn; } String method1() { // do stuff } String method2() { // do other stuff } String method3() { // do other other stuff } // and so on... } You get the idea. This was working fine for me, but now I need a runtime-accessible mapping from key to function; not every function actually returns a String (some return void) and I need to dynamically access the return type (using reflection) of each function in each class that there's a key for. I already have a manager that knows about all the keys, but not the mapping from key to function. My first instinct was to replace this mapping using if-else statements with a Map<String, Function>, like I could do in Javascript. But, Java doesn't support first-class functions so I'm out of luck there. I could probably dig up a third-party library that lets me work with first-class functions, but I haven't seen any yet, and I doubt that I need an entire new library. I also thought of putting these String keys into an array and using reflection to invoke the methods by name, but I see two downsides to this method: My keys would have to be named the same as the method - or be named in a particular, consistent way so that it's easy to map them to the method name. This seems WAY slower than the if-else statements I have right now. Efficiency is something of a concern because these methods will tend to get called pretty frequently, and I want to minimize unnecessary overhead. TL; DR: I'm looking for a clean, minimal-overhead way to map a String to some sort of a Function object that I can invoke and call (something like) getReturnType() on. I don't especially mind using a 3rd-party library if it really fits my needs. I also don't mind using reflection, though I would strongly prefer to avoid using reflection every single time I do a method lookup - maybe using some caching strategy that combines the Map with reflection. Thoughts on a good way to get what I want? Cheers!

  Read the article

• dns queries not using nscd for caching

  - by xenoterracide

  I'm trying to use nscd (Nameservices Cache Daemon) to cache dns locally so I can stop using bind to do it. I've gotten it started and ntpd seems to attempt to use it. But everything else for hosts seems to ignore it. e.g if I do dig apache.org 3 times none of them will hit the cache. I'm viewing the cache stats using nscd -g to determine whether it's been used. I've also turned the debug log level up to see if I can see it hitting and the queries don't even hit nscd. nsswitch.conf # Begin /etc/nsswitch.conf passwd: files group: files shadow: files publickey: files hosts: cache files dns networks: files protocols: files services: files ethers: files rpc: files netgroup: files # End /etc/nsswitch.confenter code here nscd.conf # # /etc/nscd.conf # # An example Name Service Cache config file. This file is needed by nscd. # # Legal entries are: # # logfile <file> # debug-level <level> # threads <initial #threads to use> # max-threads <maximum #threads to use> # server-user <user to run server as instead of root> # server-user is ignored if nscd is started with -S parameters # stat-user <user who is allowed to request statistics> # reload-count unlimited|<number> # paranoia <yes|no> # restart-interval <time in seconds> # # enable-cache <service> <yes|no> # positive-time-to-live <service> <time in seconds> # negative-time-to-live <service> <time in seconds> # suggested-size <service> <prime number> # check-files <service> <yes|no> # persistent <service> <yes|no> # shared <service> <yes|no> # max-db-size <service> <number bytes> # auto-propagate <service> <yes|no> # # Currently supported cache names (services): passwd, group, hosts, services # logfile /var/log/nscd.log threads 4 max-threads 32 server-user nobody # stat-user somebody debug-level 9 # reload-count 5 paranoia no # restart-interval 3600 enable-cache passwd yes positive-time-to-live passwd 600 negative-time-to-live passwd 20 suggested-size passwd 211 check-files passwd yes persistent passwd yes shared passwd yes max-db-size passwd 33554432 auto-propagate passwd yes enable-cache group yes positive-time-to-live group 3600 negative-time-to-live group 60 suggested-size group 211 check-files group yes persistent group yes shared group yes max-db-size group 33554432 auto-propagate group yes enable-cache hosts yes positive-time-to-live hosts 3600 negative-time-to-live hosts 20 suggested-size hosts 211 check-files hosts yes persistent hosts yes shared hosts yes max-db-size hosts 33554432 enable-cache services yes positive-time-to-live services 28800 negative-time-to-live services 20 suggested-size services 211 check-files services yes persistent services yes shared services yes max-db-size services 33554432 resolv.conf # Generated by dhcpcd from eth0 nameserver 127.0.0.1 domain westell.com nameserver 192.168.1.1 nameserver 208.67.222.222 nameserver 208.67.220.220 as kind of a side note I'm using archlinux.

  Read the article

• DNS lookups failing somewhere between firewall and router

  - by TessellatingHeckler

  we have a setup of ADSL line - Cisco 837 ADSL router - Zyxel ZyWall 35 firewall/NAT - Switch == Intel load balanced NICS in a server. It has been fine for years, suddenly DNS resolution stopped working on the server. No changes that I know of, so I can't work backwards from there. It was configured with the ISP's DNS servers, neither network device does DNS relaying. Wireshark shows the request go out but nothing comes back. The server networking stack seems OK though, because if we query an internal DNS server on a remote site, that works. I can logon to the Cisco, and DNS resolves OK from the command line. I can logon to the ZyWall, and DNS does not resolve from the command line. So the problem seems to be the firewall, patch cable or router, yes? On the router: interface Ethernet0 ip address aaa.bbb.ccc.ddd 255.255.255.ddd ip tcp adjust-mss 1450 hold-queue 100 out On the firewall: DNS server set to 8.8.8.8 (Google's), DNS traffic allowed LAN-WAN. What else should I look for? Update: Following This guide I've got traffic logging on the Cisco. I have also got access to a public DNS server which I can run tcpdump on to see things from the other side. And as per the below comments, I've tested with Dig and see that DNS over TCP works, and over UDP does not. Currently: DNS request from the server using TCP shows up in the firewall log, and in the Cisco log, and in tcpdump on the DNS server, the answer comes back, it works fine. DNS request from the server using UDP shows up in the firewall log, and in the Cisco log, does NOT show in tcpdump on the DNS server, times out. DNS request from the cisco (using UDP) does show up in tcpdump on the DNS server, answer received, works fine. Ping requests from the server and the cisco to the DNS server show up in tcpdump on the DNS server. DNS request from the server using UDP does show up on the firewall. Summary: TCP seems fine throughought. UDP works over the ADSL and to the Cisco, and it works from the server to the Cisco, but it doesn't cross the Cisco properly, it seems. I did see the Cisco showing as connected at 10Mb/full-duplex internally, and the firewall showing as 100Mb/full-duplex externally. I have forced the firewall to 10Mb and rebooted both devices. That seemed to help get UDP traffic (server-firewall-cisco) instead of (server-firewall), but did not fix it. Update: Sanitized Cisco config: version 12.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname cisco ! logging queue-limit 100 enable secret 5 {password} enable password 7 {password} ! ip subnet-zero ip domain name example.org ip name-server {nameserver_IP} ! ! ip audit notify log ip audit po max-events 100 no ftp-server write-enable ! interface Ethernet0 ip address {Inside_public_IP} 255.255.255.248 ip tcp adjust-mss 1460 hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface Dialer1 ip unnumbered Ethernet0 encapsulation ppp dialer pool 1 dialer idle-timeout 0 dialer persistent no cdp enable ppp chap hostname {ADSL_Username} ppp chap password 7 {ADSL_Password} ! ip classless ip route 0.0.0.0 0.0.0.0 Dialer1 no ip http server no ip http secure-server ! access-list 23 permit {IP} dialer-list 1 protocol ip permit no cdp run snmp-server enable traps tty ! {con, vty} end

  Read the article

< Previous Page | 18 19 20 21 22 23 24 25  | Next Page >