fibre channel - Page 22

Media Center is sending duplicate #'s when changing channels

- by Robert

I recently switched from cable to DirecTV (satellite). I went through the "Set up TV signal" in Media Center, and I went through the manual setup of the remote as it didn't recognize the DirecTV remote. All seemed okay, except sometimes (often - about 1/2 the time) when I select a channel in Media Center's guide it sends 5527 instead of 527 or 5446 instead of 546 - so it doesn't change the channel correctly. (I see the numbers show up on the TV screen before the channel changes.) I tried re-learning the remote, but the problem is still there. (Media Center is changing channels through the IR Blaster attached to the front of the DirecTV box.)

Read the article

Force Windows to output only mono sound

- by J. Polfer

So, the 'right' half of my pair of headphones broke (the transducer+wire are fine, but the earpiece broke on the headband and so the earpiece won't sit over my ear). So now the right channel is being broadcast to my cube neighbors when I wear my headphones. Yes, they look very silly. Is there a way to ensure, in Windows XP (or Windows Media Player), that all stereo sound is downmixed to the left channel only (ie, in mono) so my neighbors don't hear my music? I know that I can setup the mixer to set the balance to 100% left, but information in the right channel won't be heard.

Read the article

Is 50% download speed on a wireless G network normal?

- by Bartlomiej Skwira

I have a wired connection of about 36Mb/s, but my wireless speed is max at about 18-19Mb/s. I have a WRT54G-TM (T-Mobile, 802.11G) router with DD-WRT firmware - I've upgraded it to latest build. Done some settings changes: changed channel - 13 wireless network mode - G-only ACK Timing - 0 Fragmentation Threshold and RTS Threshold - 2304 Basic Rate - All Signal/Noise ratio: -46/-94, signal quality ~50-60%. Is this normal with G networks? Edit: The AP is located about 2 meters from laptop, no walls or metal objects, but its next to a TV. I've done a channel scan (had problems locating it, go to "Status - Wireless - Site survey" - lame naming) and everybody else is on channels 1 and 6. Switched to channel 11 but it didn't help. As for trasmit power I got best results with default 71mw. The antenna might be a factor, I'm using the default 2 antennas.

Read the article

EPM System Standard Deployment Video Series

- by Paul Anderson -Oracle

(in via Jan) A four-part video series on deploying Enterprise Performance Management (EPM) System Products has been made available within the Oracle EPMWebcasts YouTube channel. This video series is designed for system administrators. It provides an overview of how to deploy EPM System products using the standard deployment methodology. Deploying EPM System Using Standard Deployment video series: Part 1 - Overview [3:12] Describes the EPM standard deployment and details each of the videos in the series. Part 2 - Preparing for Deployment [3:41] Discusses how to prepare for an EPM standard deployment. Part 3 - Installing and Configuring an Initial Instance of EPM System [4:11] Outlines the steps to install and configure an initial instance of EPM System components.. Part 4 - Scaling Out and Installing EPM System Clients [4:00] Provides an overview of the steps to scale out EPM System components and install EPM System client software. More information is available within the PDF document: EPM System Standard Deployment Guide 11.1.2.3 To view and and access other Oracle EPM Webcast videos visit: Oracle EPM Webcasts YouTube Channel To view and download all of the EPM product documentation visit the Oracle Technology Network (OTN) EPM Documentation Library. In addition to the Oracle EPM Webcasts YouTube channel these videos along with other EPM related product videos and information are available in the Oracle Learning Library (OLL) - visit: Oracle Learning Library - EPM Consolidation and Planning Videos

Read the article

Partner Webcast – Oracle CRM: The Age of the Customer - 18 July 2013

- by Thanos

High-touch solutions for the complete customer experience How does Customer Relationship Management change in "the age of the customer", or does it at all? Customer relationship management has changed over the past years from a pure "inside out" point of view, where the customer is the center of attention to an "outside in" discipline where the customer has become the driving force. Away from the 360° view, through data to a holistic view of the customer’s journey and experience, through behavioral analysis and interaction across all touch points along a lifecycle of a customer relationship. Learn how this approach, integrating sales, service and marketing channels into one cohesive customer experience can drive customer experience and support acquisition, retention and efficiency in your customer relationship. With Oracle's Sales, Service and Marketing cloud offerings, you can be ahead of the game and provide a consistent and personalized voice to your customers, regardless of which channels you favor and your customers prefer. Integrated, cross-channel campaign automation and service delivery, as well as feedback-loops to sales automation, will provide you with tools to achieve top-of-the-line customer experience. Agenda · Oracle Customer Experience - Introduction into a new take on CRM · Oracle Sales Cloud - Integrated Salesforce Automation · Oracle Marketing Cloud - Cross-Channel Campaign Management · Oracle Service Cloud - Channel-blending in service delivery Delivery Format This FREE online LIVE eSeminar will be delivered over the Web. Registrations received less than 24 hours prior to start time may not receive confirmation to attend. Duration: 1 hour REGISTER NOW For any questions please contact us at partner.imc-AT-beehiveonline.oracle-DOT-com.

Read the article

codesniffer command not being recognized after several installs and upgrades

- by numerical25

I've tried to install codesniffer using pear but my mac is not recognizing the phpcs command. pear config Configuration (channel pear.php.net): ===================================== Auto-discover new Channels auto_discover 1 Default Channel default_channel pear.php.net HTTP Proxy Server Address http_proxy <not set> PEAR server [DEPRECATED] master_server pear.php.net Default Channel Mirror preferred_mirror pear.php.net Remote Configuration File remote_config <not set> PEAR executables directory bin_dir /usr/local/pear/bin PEAR documentation directory doc_dir /usr/local/pear/docs PHP extension directory ext_dir /opt/local/lib/php/extensions/no-debug-non-zts-20090626 PEAR directory php_dir /usr/local/pear/share/pear PEAR Installer cache directory cache_dir /private/tmp/pear/cache PEAR configuration file cfg_dir /usr/local/pear/cfg directory PEAR data directory data_dir /usr/local/pear/data PEAR Installer download download_dir /tmp/pear/install directory PHP CLI/CGI binary php_bin /opt/local/bin/php php.ini location php_ini /opt/local/etc/php5/php.ini-development --program-prefix passed to php_prefix <not set> PHP's ./configure --program-suffix passed to php_suffix <not set> PHP's ./configure PEAR Installer temp directory temp_dir /tmp/pear/install PEAR test directory test_dir /usr/local/pear/tests PEAR www files directory www_dir /usr/local/pear/www Cache TimeToLive cache_ttl 3600 Preferred Package State preferred_state stable Unix file mask umask 22 Debug Log Level verbose 1 PEAR password (for password <not set> maintainers) Signature Handling Program sig_bin /usr/local/bin/gpg Signature Key Directory sig_keydir /opt/local/etc/pearkeys Signature Key Id sig_keyid <not set> Package Signature Type sig_type gpg PEAR username (for username <not set> maintainers) User Configuration File Filename /Users/anthonygordon/.pearrc System Configuration File Filename /opt/local/etc/pear.conf i checked php_bin and the php executable is there. when i run phpcs i get command not found Ive tried to upgrade pear, uninstall reinstall code sniffer, everything. when i run installs list i get Pear List Package Version State Archive_Tar 1.3.10 stable Console_Getopt 1.3.1 stable PEAR 1.9.4 stable PHP_CodeSniffer 1.4.0 stable Structures_Graph 1.0.4 stable XML_Util 1.2.1 stable

Read the article

Organizations & Architecture UNISA Studies – Chap 7

- by MarkPearl

Learning Outcomes Name different device categories Discuss the functions and structure of I/.O modules Describe the principles of Programmed I/O Describe the principles of Interrupt-driven I/O Describe the principles of DMA Discuss the evolution characteristic of I/O channels Describe different types of I/O interface Explain the principles of point-to-point and multipoint configurations Discuss the way in which a FireWire serial bus functions Discuss the principles of InfiniBand architecture External Devices An external device attaches to the computer by a link to an I/O module. The link is used to exchange control, status, and data between the I/O module and the external device. External devices can be classified into 3 categories… Human readable – e.g. video display Machine readable – e.g. magnetic disk Communications – e.g. wifi card I/O Modules An I/O module has two major functions… Interface to the processor and memory via the system bus or central switch Interface to one or more peripheral devices by tailored data links Module Functions The major functions or requirements for an I/O module fall into the following categories… Control and timing Processor communication Device communication Data buffering Error detection I/O function includes a control and timing requirement, to coordinate the flow of traffic between internal resources and external devices. Processor communication involves the following… Command decoding Data Status reporting Address recognition The I/O device must be able to perform device communication. This communication involves commands, status information, and data. An essential task of an I/O module is data buffering due to the relative slow speeds of most external devices. An I/O module is often responsible for error detection and for subsequently reporting errors to the processor. I/O Module Structure An I/O module functions to allow the processor to view a wide range of devices in a simple minded way. The I/O module may hide the details of timing, formats, and the electro mechanics of an external device so that the processor can function in terms of simple reads and write commands. An I/O channel/processor is an I/O module that takes on most of the detailed processing burden, presenting a high-level interface to the processor. There are 3 techniques are possible for I/O operations Programmed I/O Interrupt[t I/O DMA Access Programmed I/O When a processor is executing a program and encounters an instruction relating to I/O it executes that instruction by issuing a command to the appropriate I/O module. With programmed I/O, the I/O module will perform the requested action and then set the appropriate bits in the I/O status register. The I/O module takes no further actions to alert the processor. I/O Commands To execute an I/O related instruction, the processor issues an address, specifying the particular I/O module and external device, and an I/O command. There are four types of I/O commands that an I/O module may receive when it is addressed by a processor… Control – used to activate a peripheral and tell it what to do Test – Used to test various status conditions associated with an I/O module and its peripherals Read – Causes the I/O module to obtain an item of data from the peripheral and place it in an internal buffer Write – Causes the I/O module to take an item of data form the data bus and subsequently transmit that data item to the peripheral The main disadvantage of this technique is it is a time consuming process that keeps the processor busy needlessly I/O Instructions With programmed I/O there is a close correspondence between the I/O related instructions that the processor fetches from memory and the I/O commands that the processor issues to an I/O module to execute the instructions. Typically there will be many I/O devices connected through I/O modules to the system – each device is given a unique identifier or address – when the processor issues an I/O command, the command contains the address of the address of the desired device, thus each I/O module must interpret the address lines to determine if the command is for itself. When the processor, main memory and I/O share a common bus, two modes of addressing are possible… Memory mapped I/O Isolated I/O (for a detailed explanation read page 245 of book) The advantage of memory mapped I/O over isolated I/O is that it has a large repertoire of instructions that can be used, allowing more efficient programming. The disadvantage of memory mapped I/O over isolated I/O is that valuable memory address space is sued up. Interrupts driven I/O Interrupt driven I/O works as follows… The processor issues an I/O command to a module and then goes on to do some other useful work The I/O module will then interrupts the processor to request service when is is ready to exchange data with the processor The processor then executes the data transfer and then resumes its former processing Interrupt Processing The occurrence of an interrupt triggers a number of events, both in the processor hardware and in software. When an I/O device completes an I/O operations the following sequence of hardware events occurs… The device issues an interrupt signal to the processor The processor finishes execution of the current instruction before responding to the interrupt The processor tests for an interrupt – determines that there is one – and sends an acknowledgement signal to the device that issues the interrupt. The acknowledgement allows the device to remove its interrupt signal The processor now needs to prepare to transfer control to the interrupt routine. To begin, it needs to save information needed to resume the current program at the point of interrupt. The minimum information required is the status of the processor and the location of the next instruction to be executed. The processor now loads the program counter with the entry location of the interrupt-handling program that will respond to this interrupt. It also saves the values of the process registers because the Interrupt operation may modify these The interrupt handler processes the interrupt – this includes examination of status information relating to the I/O operation or other event that caused an interrupt When interrupt processing is complete, the saved register values are retrieved from the stack and restored to the registers Finally, the PSW and program counter values from the stack are restored. Design Issues Two design issues arise in implementing interrupt I/O Because there will be multiple I/O modules, how does the processor determine which device issued the interrupt? If multiple interrupts have occurred, how does the processor decide which one to process? Addressing device recognition, 4 general categories of techniques are in common use… Multiple interrupt lines Software poll Daisy chain Bus arbitration For a detailed explanation of these approaches read page 250 of the textbook. Interrupt driven I/O while more efficient than simple programmed I/O still requires the active intervention of the processor to transfer data between memory and an I/O module, and any data transfer must traverse a path through the processor. Thus is suffers from two inherent drawbacks… The I/O transfer rate is limited by the speed with which the processor can test and service a device The processor is tied up in managing an I/O transfer; a number of instructions must be executed for each I/O transfer Direct Memory Access When large volumes of data are to be moved, an efficient technique is direct memory access (DMA) DMA Function DMA involves an additional module on the system bus. The DMA module is capable of mimicking the processor and taking over control of the system from the processor. It needs to do this to transfer data to and from memory over the system bus. DMA must the bus only when the processor does not need it, or it must force the processor to suspend operation temporarily (most common – referred to as cycle stealing). When the processor wishes to read or write a block of data, it issues a command to the DMA module by sending to the DMA module the following information… Whether a read or write is requested using the read or write control line between the processor and the DMA module The address of the I/O device involved, communicated on the data lines The starting location in memory to read from or write to, communicated on the data lines and stored by the DMA module in its address register The number of words to be read or written, communicated via the data lines and stored in the data count register The processor then continues with other work, it delegates the I/O operation to the DMA module which transfers the entire block of data, one word at a time, directly to or from memory without going through the processor. When the transfer is complete, the DMA module sends an interrupt signal to the processor, this the processor is involved only at the beginning and end of the transfer. I/O Channels and Processors Characteristics of I/O Channels As one proceeds along the evolutionary path, more and more of the I/O function is performed without CPU involvement. The I/O channel represents an extension of the DMA concept. An I/O channel ahs the ability to execute I/O instructions, which gives it complete control over I/O operations. In a computer system with such devices, the CPU does not execute I/O instructions – such instructions are stored in main memory to be executed by a special purpose processor in the I/O channel itself. Two types of I/O channels are common A selector channel controls multiple high-speed devices. A multiplexor channel can handle I/O with multiple characters as fast as possible to multiple devices. The external interface: FireWire and InfiniBand Types of Interfaces One major characteristic of the interface is whether it is serial or parallel parallel interface – there are multiple lines connecting the I/O module and the peripheral, and multiple bits are transferred simultaneously serial interface – there is only one line used to transmit data, and bits must be transmitted one at a time With new generation serial interfaces, parallel interfaces are becoming less common. In either case, the I/O module must engage in a dialogue with the peripheral. In general terms the dialog may look as follows… The I/O module sends a control signal requesting permission to send data The peripheral acknowledges the request The I/O module transfers data The peripheral acknowledges receipt of data For a detailed explanation of FireWire and InfiniBand technology read page 264 – 270 of the textbook

Read the article

Why is my Internet connection randomly dropping?

- by Jeanno

Ever since I have installed 12.04 (clean install not an upgrade), i have been having a drop in the Internet connection. The drop in the connection can be anything from 15 seconds to about 3 mins, and then the connection comes back. This behaviour happens while I am actively browsing the Internet, or if I wake up the computer and open Firefox (sometimes I have connection and sometimes I don't) . Please note that when the internet connection is on, it is not slow (as speedtest.net results show) In the beginning, I thought it was a problem with the driver r8169 for my RTL8111/8168B Ethernet card, so I downloaded the r8168 from Realtek website, followed the detailed instructions (blacklisted r8169, changed the file to '.bsh' ...), but still the same problem persisted. So I switched to a wireless connection, and I got the same problem with internet connection dropping randomly. Any ideas? Thanks in advance Output from 'lspci -v' Code: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f8000000-fa0fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dbffffff Capabilities: [88] Subsystem: Dell Device 04a7 Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f4000000-f60fffff Prefetchable memory behind bridge: 00000000c0000000-00000000cbffffff Capabilities: [88] Subsystem: Dell Device 04a7 Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at f6108000 (64-bit, non-prefetchable) [size=16] Capabilities: [50] Power Management version 3 Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at f6107000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f6100000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fa400000-fa4fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Prefetchable memory behind bridge: 00000000dc100000-00000000dc1fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fa300000-fa3fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fa200000-fa2fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f6106000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation P67 Express Chipset Family LPC Controller (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel modules: iTCO_wdt 00:1f.2 RAID bus controller: Intel Corporation 82801 SATA Controller [RAID mode] (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 42 I/O ports at f070 [size=8] I/O ports at f060 [size=4] I/O ports at f050 [size=8] I/O ports at f040 [size=4] I/O ports at f020 [size=32] Memory at f6105000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA v1.0 Capabilities: [b0] PCI Advanced Features Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: Dell Device 04a7 Flags: medium devsel, IRQ 5 Memory at f6104000 (64-bit, non-prefetchable) [size=256] I/O ports at f000 [size=32] Kernel modules: i2c-i801 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0dc5 (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at f8000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=128M] Memory at d8000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at fa000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 01:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at fa080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 02:00.0 VGA compatible controller: NVIDIA Corporation Device 0dc5 (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f4000000 (32-bit, non-prefetchable) [size=32M] Memory at c0000000 (64-bit, prefetchable) [size=128M] Memory at c8000000 (64-bit, prefetchable) [size=64M] I/O ports at d000 [size=128] Expansion ROM at f6000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at f6080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 03:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fa400000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 51 I/O ports at c000 [size=256] Memory at dc104000 (64-bit, prefetchable) [size=4K] Memory at dc100000 (64-bit, prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 03-00-00-00-68-4c-e0-00 Kernel driver in use: r8168 Kernel modules: r8168 05:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller (rev 01) (prog-if 10 [OHCI]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at fa300000 (64-bit, non-prefetchable) [size=2K] I/O ports at b000 [size=256] Capabilities: [50] Power Management version 3 Capabilities: [80] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [98] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [130] Device Serial Number 00-10-dc-ff-ff-cf-56-1a Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 06:00.0 SATA controller: JMicron Technology Corp. JMB362 SATA Controller (rev 10) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 19 I/O ports at a040 [size=8] I/O ports at a030 [size=4] I/O ports at a020 [size=8] I/O ports at a010 [size=4] I/O ports at a000 [size=16] Memory at fa210000 (32-bit, non-prefetchable) [size=512] Capabilities: [8c] Power Management version 3 Capabilities: [50] Express Legacy Endpoint, MSI 00 Kernel driver in use: ahci Note that my wireless card is not showing, I have the Ralink 3390 card (which apparently does not show up on Ubuntu for some reason), however I am able to connect to wireless network and connect to the internet (when it is working)

Read the article

The Internet of Things & Commerce: Part 3 -- Interview with Kristen J. Flanagan, Commerce Product Management

- by Katrina Gosek, Director | Commerce Product Strategy-Oracle

Internet of Things & Commerce Series: Part 3 (of 3) And now for the final installment my three part series on the Internet of Things & Commerce. Post one, “The Next 7,000 Days”, introduced the idea of the Internet of Things, followed by a second post interviewing one of our chief commerce innovation strategists, Brian Celenza. This final post in the series is an interview with Kristen J. Flanagan, lead product manager for Oracle Commerce omnichannel strategy. She takes us through the past, present, and future of how our Commerce Solution is re-imagining the way physical and digital shopping come together. ------- QUESTION: It’s your job to stay on top of what our customers’ need to not only run their online businesses effectively, but also to make sure they have product capabilities they can innovate and grow on. What key trend has been top-of-mind for you and our customers around this collision of physical and digital shopping? Kristen: I’ll agree with Brian Celenza that hands down mobile has forced a major disruption in shopping and selling behavior. A few years ago, mobile exploded at a pace I don't think anyone was expecting. Early on, we saw our customers scrambling to establish a mobile presence---mostly through "screen scraping" technologies. As smartphones continued to advance (at lightening speed!), our customers started to investigate ways to truly tap in to their eCommerce capabilities to deliver the mobile experience. They started looking to us for a means of using the eCommerce services and capabilities to deliver a mobile experience that is tailored for mobile rather than the desktop experience on a smaller screen. In the future, I think we'll see customers starting to really understand what their shoppers need and expect from a mobile offering and how they can adapt their content and delivery of that content to meet those needs. And, mobile shopping doesn’t stop at the consumer / buyer. Because the in-store experience is compelling and has advantages that digital just can't offer, we're also starting to see the eCommerce services being leveraged for mobile for in-store sales associates. Brick-and-mortar retailers are interested in putting the omnichannel product catalog, promotions, and cart into the hands of knowledgeable associates. Retailers are now looking to connect and harness the eCommerce data in-store so that shoppers have a reason to walk-in. I think we'll be seeing a lot more customers thinking about melding the in-store and digital experiences to present a richer offering for shoppers. QUESTION: What are some examples of what our customers are doing currently to bring these concepts to reality? Kristen: Well, without question, connecting digital and brick-and-mortar worlds is becoming tablestakes for selling experiences. If a brand has a foot in both worlds (i.e., isn’t a pureplay online retailer), they have to connect the dots because shoppers – whether consumers or B2B buyers –don't think in clearly defined channels anymore. The expectation is connectedness – for on- and offline experiences, promotions, products, and customer data. What does this mean practically for businesses selling goods on- and offline? It touches a lot of systems: inventory info on the eCommerce site, fulfillment options across channels (buy online/pickup in store), order information (representing various channels for a cohesive view of shopper order history), promotions across digital and store, etc. A few years ago, the main link between store and digital was the smartphone. We all remember when “apps” became a thing and many of our customers were scrambling to get a native app out there. Now we're seeing more strategic thinking around the benefits of mobile web vs. native and how that ties in to the purpose and role of mobile within the digital channel. Put it more broadly, how these pieces fit together in the overall brand puzzle. The same could be said for “showrooming.” Where it was a major concern (i.e., shoppers using stores to look at merchandise and then order online from Amazon), in recent months, it’s emerged that the inverse is now becoming a a reality as well. "Webrooming" (using digital sites to do research before making a purchase in the store) is a new behavior pure play retailers are challenged with. There are many technologies, behaviors, and information that need to tie together to offer a holistic omnichannel shopping experience. As a result, brands are looking for ways to connect the digital and in-store experiences to bridge the gaps: shared assortments across channels, assisted selling apps that arm associates with information about shoppers, shared promotions, inventory, etc. QUESTION: How has Oracle Commerce been built to help brands make the link between in-store and digital over the last few years? Kristen: Over the last seven years, the product has been in step with the changes in industry needs. Here is a brief history of the evolution: Prior to Oracle’s acquisition of ATG and Endeca, key investments were made to cross-channel functionality that we are still building on today. Commerce Service Center (v2007.1) ATG introduced the Commerce Service Center in 2007.1 and marked the first entry into what was then called “cross-channel.” The Commerce Service Center is a call-center-agent-facing application that enables agents to see shopper orders, online catalog, promotions, and pricing. It is tightly integrated with the eCommerce capabilities of the platform and commerce engine and provided a means of connecting data from the call center and online channels. REST services framework (v9.1) In v9.1 we introduced the REST services framework and interface in the Platform that enabled customers to use ATG web services in other applications. This framework has become the basis for our subsequent omni-channel features and functionality. Multisite Architecture (v10) With the v10 release, we introduced the Multisite Architecture, which enabled customers to manage multiple sites (and channels) within a single instance of the BCC. Customers could create site- and channel-specific catalogs, promotions, targeters, and scenarios. Endeca Page Builder (2.x) / Experience Manager (3.x) With the introduction of Endeca for Mobile (now part of the core platform, available through the reference store – see blow) on top of Page Builder (and then eventually Experience Manager), Endeca gave business users the tools to create and manage native and mobile web applications. And since the acquisition of both ATG (2011) and Endeca (2012), Oracle Commerce has leveraged the best of each leading technology’s capabilities for omnichannel commerce to continue to drive innovation for our customers. Service enablement of core Oracle Commerce capabilities (v10.1.1, 10.2, & 11) After the establishment of the REST services framework and interface, we followed up in subsequent releases with service enablement of core Oracle Commerce capabilities throughout the iOS native app and the enablement of the core Commerce Service Center features. The result is that customers can leverage these services for their integrations with other systems, as well as their omnichannel initiatives. Mobile web reference application (v10.1) In 10.1 we introduced the shopper-facing mobile reference application that showed how to use Oracle Commerce to deliver a mobile web experience for shoppers. This included the use of Experience Manager and cartridges to drive those experiences on select pages. Native (iOS) reference application (v10.1.1) We came out with the 10.1.1 shopper-facing native iOS ref app that illustrated how to use the Commerce REST services to deliver an iOS app. Also included Experience Manager-driven pages. Assisted Selling reference application (v10.2.1) The Assisted Selling reference application is our first reference application designed for the in-store associate. This iOS app shows customers how they can use Oracle Commerce data and information to provide a high-touch, consultative sales environment as well as to put the endless aisle into hands of their associates. Shoppers can start a cart online, and in-store associates can access that cart via the application to provide more information or add products and then transact using the ATG engine. Support for Retail promotions (v11) As part of the v11 release, we worked with teams in the Oracle Retail Global Business Unit (RGBU) to assess which promotion types and capabilities are supported across our products. Those products included Oracle Commerce, Oracle Point of Service (ORPOS), and Oracle Retail Price Management (RPM). The result is that customers can now more easily support omnichannel use cases between the store and digital. Making sure Oracle Commerce can help support the omnichannel needs of our customers is core to our product strategy. With 89% of consumers now use two or more channels to make a single purchase, ensuring that cross-channel interactions are linked is critical to a great customer experience – and to sales. As Oracle Commerce evolves, we want to make it simple for organizations to create, deliver, and scale experiences across touchpoints with our create once, deploy commerce anywhere framework. We have a flexible, services-oriented architecture that allows data, content, catalogs, cart, experiences, personalization, and merchandising to be shared across touchpoints and easily extended in to new environments like mobile, social, in-store, Call Center, and new Websites. [For the latest downloads and Oracle Commerce documentation, please visit the Oracle Technical Network.] ------ Thank you to both Brian and Kristen for their contributions and to this blog series and their continued thought leadership for Oracle Commerce. We are all looking forward to the coming years of months of new shopping behaviors and opportunities to innovate. Because – if the digital fabric of our everyday lives continues to change at the same pace – the next five years (that just under 2,000 days), will be dramatic. ---------- THIS DOCUMENT IS FOR INFORMATIONAL PURPOSES ONLY AND MAY NOT BE INCORPORATED INTO A CONTRACT OR AGREEMENT

Read the article

How Do Top Performing High Tech Companies Measure Online Marketing Success?

- by Charles Knapp

You might expect a focus on Net Promoter scores, open rates, and click metrics. The real answers from top performers may surprise you. I've been working for a few months with Aberdeen Group and colleagues from IBM and Oracle to survey high technology firms worldwide on best practices in marketing and channel sales effectiveness. Now, we will share the results of our original customer research in a new white paper and webcast. Register today to learn how leading High Tech companies are increasing their Return on Marketing Investment (ROMI) and growing channel sales revenue. Discover how top performing high tech companies manage and use customer data, measure marketing spend effectiveness, and support internal and channel sales. Learn how best in class high tech companies use enterprise data throughout their customer lifecycle -- messaging to leads, selling to prospects, and serving customers. Our speakers will be: Peter Ostrow, Research Director - Sales Effectiveness, Aberdeen Group David Lasher, Global Business Services Partner, IBM Jonathan Oomrigar, Vice President, Global High Technology Business Unit, Oracle Reserve your place now! This global webinar is on Tuesday, November 15, 10-11 am PST / 1-2 pm EST / 6-7 GMT / 7-8 CET

Read the article

How to solve my big communication issue and take care in future

- by Rahul Mehta

My company had a POC which was done by me,my senior ,my boss and our channel partner team 4 people and our company team done most of coding and first installation of the softwares of the POC was done by channel partner team, and documented the same thing, i had installed on our server, Our comapny team worked very hard. Now we are about to start second stage of POC. But today my boss told me that my senior and channel partner team have issue with me ,regarding my communication. So before considering me on this project they want to resolve this issue or not considered me . I agree i have less communications skills. and I don't ask any question till i need to any one , i prefer to ask on stackoverflow. But i don't know, how this issue is being arise ,i had done all the things they asked , replied to all email and talk on phone. I always obeyed them. I always told them what they asked. what should i do that these type of issue doesn't arrive in future. And now boss told me to prepare a script to talk with my senior to resolve the issue. what should i talk to my senior? I want to work on this project , but i don't want to do so much request to work on this project. How should and what should (Code Documentation , Research Material I done etc . what are docs neccessary for communication with team member )i communication with my team member in future so these kind of issue not arise.

Read the article

Arrow ECS Oracle OpenWorld update

- by mseika

A date to mark in your diaries now! On Tuesday 23rd October will be holding our post Oracle OpenWorld Oracle. Covering all the important announcements from Oracle OpenWorld, this must attend event will be held in the Royal Exchange, London. The full agenda and speaker line up is being finalised but we will cover all the major strategy and product announcements from Oracle OpenWorld, FY 13 Channel Strategy and Partnering with Arrow ECS. Oracle OpenWorld a Channel Perspective, David Tweddle - Head of UK Alliance and Channel Hardware Announcements, Christopher Lindsay - Oracle Hardware EMEA Software Announcements, speaker to be confirmed Arrow ECS Focus and Strategy, Simon Rushbrook - Business Development Manager, Arrow ECS Summary and close, Nick Tinsley - Sales Director Who should attend? The event is subject Oracle NDA and is aimed at sales and pre-sales personal within your organisation. This event will commence at 12.30 with lunch, presentations will start at 1.30 and will close at 4.30 followed by drinks and networking. Full details to follow shortly but save the date and register now. Date & Time Tuesday 23rd October 201212.30pm - 4.30pm Post event drinks will be servedfrom 4.30pm Location London OfficeEntrance 2, Fourth Floor,The Royal Exchange,London, EC3V 3LN Click here for directions >

Read the article

IRC News from #netbeans on FreeNode

- by Geertjan

I joined the #netbeans channel on FreeNode last week and the discussions there are really great. It's so cool to not have the endless back and forth of an e-mail exchange. Instead, you can hammer out a complete solution to a problem while chatting live in the channel. A case in point was yesterday, when someone named 'charmeleon' wanted to create a NetBeans Platform based application that includes the "image" module from the NetBeans IDE sources. That way, he'd have a starting point for his own image-oriented application, since he'd not only have the NetBeans Platform, but also the sources of the "image" module. Had we been communicating via e-mail, it would have taken weeks, at least, to come to a solution. Instead, we hashed it out together live, including some very specific problems that would have been hard to communicate about via e-mail. In the end, I made a movie showing exactly the scenario that charmeleon was interested in: And, right now, in the #netbeans channel, charmeleon said: "NetBeans RCP feels like cheating once you start getting over the hump." I'm sure the fact that the hump was handled within a few hours of chatting on irc is a big contributor to that impression.

Read the article

YouTube custom thumbnails feature availability

- by skat

I've been trying to figure out this on my own for weeks, but now I give up. 'Custom thumbnails' feature on YouTube is such a controversial one, it was changed so much... so much that even FAQ on YouTube doesn't fully describe it's features (as I see). I have a YouTube channel for one of my websites. This YouTube channel is main marketing force for my website - it brings all the boys to my yard (I mean, website). So I have to use all the hacky-tricky stuff to increase my visibility on youtube. And damn, those custom thumbnails are giving me hard times... As far as I understand, this is current state of 'custom thumbnail' feature: "If your account is in good standing, you may have the ability to upload custom thumbnails for your video uploads." (c) https://support.google.com/youtube/answer/138008 My channel has good standing, has more than 50000 views. So why the hell my account is still not eligible for this feature? anyone have any idea?

Read the article

Issues with MIPS interrupt for tv remote simulator

- by pred2040

Hello I am writing a program for class to simulate a tv remote in a MIPS/SPIM enviroment. The functions of the program itself are unimportant as they worked fine before the interrupt so I left them all out. The gaol is basically to get a input from the keyboard by means of interupt, store it in $s7 and process it. The interrupt is causing my program to repeatedly spam the errors: Exception occurred at PC=0x00400068 Bad address in data/stack read: 0x00000004 Exception occurred at PC=0x00400358 Bad address in data/stack read: 0x00000000 program starts here .data msg_tvworking: .asciiz "tv is working\n" msg_sec: .asciiz "sec -- " msg_on: .asciiz "Power On" msg_off: .asciiz "Power Off" msg_channel: .asciiz " Channel " msg_volume: .asciiz " Volume " msg_sleep: .asciiz " Sleep Timer: " msg_dash: .asciiz "-\n" msg_newline: .asciiz "\n" msg_comma: .asciiz ", " array1: .space 400 # 400 bytes of storage for 100 channels array2: .space 400 # copy of above for sorting var1: .word 0 # 1 if 0-9 is pressed, 0 if not var2: .word 0 # stores number of channel (ex. 2-) var3: .word 0 # channel timer var4: .word 0 # 1 if s pressed once, 2 if twice, 0 if not var5: .word 0 # sleep wait timer var6: .word 0 # program timer var9: .float 0.01 # for channel timings .kdata var7: .word 10 var8: .word 11 .text .globl main main: li $s0, 300 li $s1, 0 # channel li $s2, 50 # volume li $s3, 1 # power - 1:on 0:off li $s4, 0 # sleep timer - 0:off li $s5, 0 # temporary li $s6, 0 # length of sleep period li $s7, 10000 # current key press li $t2, 0 # temp value not needed across calls li $t4, 0 interrupt data here mfc0 $a0, $12 ori $a0, 0xff11 mtc0 $a0, $12 lui $t0, 0xFFFF ori $a0, $0, 2 sw $a0, 0($t0) mainloop: # 1. get external input, and process it # input from interupt is taken from $a2 and placed in $s7 #for processing beq $a2, $0, next lw $s7, 4($a2) li $a2, 0 # call the process_input function here # jal process_input next: # 2. check sleep timer mainloopnext1: # 3. delay for 10ms jal delay_10ms jal check_timers jal channel_time # 4. print status lw $s5, var6 addi $s5, $s5, 1 sw $s5, var6 addi $s0, $s0, -1 bne $s0, $0, mainloopnext4 li $s0, 300 jal status_print mainloopnext4: j mainloop li $v0,10 # exit syscall -------------------------------------------------- status_print: seconds_stat: power_stat: on_stat: off_stat: channel_stat: volume_stat: sleep_stat: j $ra -------------------------------------------------- delay_10ms: li $t0, 6000 delay_10ms_loop: addi $t0, $t0, -1 bne $t0, $0, delay_10ms_loop jr $ra -------------------------------------------------- check_timers: channel_press: sleep_press: go_back_press: channel_check: channel_ignore: sleep_check: sleep_ignore: j $ra ------------------------------------------------ process_input: beq $s7, 112, power beq $s7, 117, channel_up beq $s7, 100, channel_down beq $s7, 108, volume_up beq $s7, 107, volume_down beq $s7, 115, sleep_init beq $s7, 118, history bgt $s7, 47, end_range jr $ra end_range: power: on: off: channel_up: over: channel_down: under: channel_message: channel_time: volume_up: volume_down: volume_message: sleep_init: sleep_incr: sleep: sleep_reset: history: digit_pad_init: digit_pad: jr $ra -------------------------------------------- interupt data here, followed closely from class .ktext 0x80000180 .set noat move $k1, $at .set at sw $v0, var7 sw $a0, var8 mfc0 $k0, $13 srl $a0, $k0, 2 andi $a0, $a0, 0x1f bne $a0, $zero, no_io lui $v0, 0xFFFF lw $a2, 4($v0) # keyboard data placed in $a2 no_io: mtc0 $0, $13 mfc0 $k0, $12 andi $k0, 0xfffd ori $k0, 0x11 mtc0 $k0, $12 lw $v0, var7 lw $a0, var8 .set noat move $at, $k1 .set at eret Thanks in advance.

Read the article

oauth_verifier is not passed using DotNetOpenAuth's Webconsumer

- by BozoJoe

I receive back a good oauth_verifier value from the server, but it is not being passed on via the ProcessUserAuthorization call to the access_token endpoint. I'm using DotNetOpenAuth 3.3.1, and the WebConsumer implementation. The server I'm working with is using OAuth 1.0a not 1.0.1. Do I need to force DotNetOpenAuth to use 1.0a? 2010-01-16 13:19:44,343 [5] DEBUG DotNetOpenAuth.Messaging.Channel [(null)] <(null)> - After binding element processing, the received UserAuthorizationResponse (1.0.1) message is: oauth_verifier: dEz9lE9AA1gcdr6oCbmD oauth_token: vauHNVOCITlbGCuqycWn 2010-01-16 13:19:44,346 [5] DEBUG DotNetOpenAuth.Messaging.Channel [(null)] <(null)> - Preparing to send AuthorizedTokenRequest (1.0) message. 2010-01-16 13:19:44,346 [5] DEBUG DotNetOpenAuth.Messaging.Bindings [(null)] <(null)> - Binding element DotNetOpenAuth.OAuth.ChannelElements.OAuthHttpMethodBindingElement applied to message. 2010-01-16 13:19:44,346 [5] DEBUG DotNetOpenAuth.Messaging.Bindings [(null)] <(null)> - Binding element DotNetOpenAuth.Messaging.Bindings.StandardReplayProtectionBindingElement applied to message. 2010-01-16 13:19:44,346 [5] DEBUG DotNetOpenAuth.Messaging.Bindings [(null)] <(null)> - Binding element DotNetOpenAuth.Messaging.Bindings.StandardExpirationBindingElement applied to message. 2010-01-16 13:19:44,346 [5] DEBUG DotNetOpenAuth.Messaging.Channel [(null)] <(null)> - Applying secrets to message to prepare for signing or signature verification. 2010-01-16 13:19:44,348 [5] DEBUG DotNetOpenAuth.Messaging.Bindings [(null)] <(null)> - Signing AuthorizedTokenRequest message using HMAC-SHA1. 2010-01-16 13:19:44,349 [5] DEBUG DotNetOpenAuth.Messaging.Bindings [(null)] <(null)> - Constructed signature base string: GET&http%3A%2F%2Fx-staging.indivo.org%3A8000%2Foauth%2Faccess_token&oauth_consumer_key%3Doak%26oauth_nonce%3DgPersiZV%26oauth_signature_method%3DHMAC-SHA1%26oauth_timestamp%3D1263676784%26oauth_token%3DvauHNVOCITlbGCuqycWn%26oauth_version%3D1.0 2010-01-16 13:19:44,349 [5] DEBUG DotNetOpenAuth.Messaging.Bindings [(null)] <(null)> - Binding element DotNetOpenAuth.OAuth.ChannelElements.SigningBindingElementChain applied to message. 2010-01-16 13:19:44,351 [5] INFO DotNetOpenAuth.Messaging.Channel [(null)] <(null)> - Prepared outgoing AuthorizedTokenRequest (1.0) message for http://x-staging.indivo.org:8000/oauth/access_token: oauth_token: vauHNVOCITlbGCuqycWn oauth_consumer_key: XXXXXXmyComsumerKeyXXXXXX oauth_nonce: gPersiZV oauth_signature_method: HMAC-SHA1 oauth_signature: xNynvr2oFlqtdoOKOl2ETiiTLGY= oauth_version: 1.0 oauth_timestamp: 1263676784 2010-01-16 13:19:44,351 [5] DEBUG DotNetOpenAuth.Messaging.Channel [(null)] <(null)> - Sending AuthorizedTokenRequest request. 2010-01-16 13:19:44,351 [5] DEBUG DotNetOpenAuth.Http [(null)] <(null)> - HTTP GET http://x-staging.indivo.org:8000/oauth/access_token 2010-01-16 13:20:34,657 [5] ERROR DotNetOpenAuth.Http [(null)] <(null)> - WebException from http://x-staging.indivo.org:8000/oauth/access_token: <h4>Internal Server Error</h4> A pastebin link to the log4net log

Read the article

WCF Timeout issue - should there even be a socket connection?

- by stiank81

I have a .Net application which is split into a client and server side. The communication between them is handled using WCF. I'm not using the automagic service references, but instead I've built the connection manually like described in the Screencast by Miguel Castro. Summarized this means that I create a console application on the server side that holds ServiceHost objects for the different services: var myServiceHost = new System.ServiceModel.ServiceHost(typeof(MyService), new Uri("net.tcp://localhost:8002")); myServiceHost.Open(); And on the client side I have service proxies creating channels using the ChannelFactory: IMyService proxy = new ChannelFactory<IMyService>("MyServiceEndpoint").CreateChannel(); The client and server side share the service contract defined in the interface IMyService. And another advantage is that I get minimal App.config files - without all the autogenerated stuff created through the Service References. Example from client side: <?xml version="1.0"?> <configuration> <system.serviceModel> <client> <endpoint address="net.tcp://localhost:8002/MyEndpoint" binding="netTcpBinding" contract="IMyService" name="MyServiceEndpoint"/> </client> </system.serviceModel> </configuration> So - to my problem. I create the proxy once, and it holds a channel all the way through the application. However, if I leave the application without use for a few minutes the channel has timed out, and I get the following exception: The socket connection was aborted. This could be caused by an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local socket timeout was '00:00:59.9979998'. How do I prevent this? I'm assuming I need to specify a higher timeout in my configuration? But I don't want it to ever time out. But on the other hand - I don't want a socket connection! Do I need one? Thought I could go connection less with WCF... What's the permanent solution and best practice on solving this? Set timeout to "never".. Create a new channel for each request? I'm assuming there is some overhead creating the channel?.. Increase the timeout to e.g. 5minutes and create new channel if the connection did timeout? Make it connection less somehow? (Without the overhead of creating channels..) Something else...

Read the article

SimpleXML not pulling correct link

- by kylex

My code does not pull the proper link for the item. Instead it's getting the previous item's link. Any suggestions? Thanks! <?php // Load the XML data from the specified file name. // The second argument (NULL) allows us to specify additional libxml parameters, // we don't need this so we'll leave it as NULL. The third argument however is // important as it informs simplexml to handle the first parameter as a file name // rather than a XML formatted string. $pFile = new SimpleXMLElement("http://example.blogspot.com/feeds/posts/default?alt=rss", null, true); // Now that we've loaded our XML file we can begin to parse it. // We know that a channel element should be available within the, // document so we begin by looping through each channel foreach ($pFile->channel as $pChild) { // Now we want to loop through the items inside this channel { foreach ($pFile->channel->item as $pItem) { // If this item has child nodes as it should, // loop through them and print out the data foreach ($pItem->children() as $pChild) { // We can check the name of this node using the getName() method. // We can then use this information, to, for example, embolden // the title or format a link switch ($pChild->getName()) { case 'pubDate': $date = date('l, F d, Y', strtotime($pChild)); echo "<p class=\"blog_time\">$date</p>"; break; case 'link': $link = $pChild; break; case 'title': echo "<p class=\"blog_title\"><a href=\"$link\">$pChild</a></p>"; break; case 'description': // echo substr(strip_tags($pChild), 0 , 270) . "..."; break; case 'author': echo ""; break; case 'category': echo ""; break; case 'guid': echo ""; break; default: // echo strip_tags($pChild) . "<br />\n"; break; } } } } } ?>

Read the article

AudioConverterConvertBuffer problem with insz error

- by Samuel

Hi Codegurus, I have a problem with the this function AudioConverterConvertBuffer. Basically I want to convert from this format _ streamFormat.mFormatFlags = kLinearPCMFormatFlagIsSignedInteger | kLinearPCMFormatFlagIsPacked |0 ; _streamFormat.mBitsPerChannel = 16; _streamFormat.mChannelsPerFrame = 2; _streamFormat.mBytesPerPacket = 4; _streamFormat.mBytesPerFrame = 4; _streamFormat.mFramesPerPacket = 1; _streamFormat.mSampleRate = 44100; _streamFormat.mReserved = 0; to this format _streamFormatOutput.mFormatFlags = kLinearPCMFormatFlagIsSignedInteger | kLinearPCMFormatFlagIsPacked|0 ;//| kAudioFormatFlagIsNonInterleaved |0; _streamFormatOutput.mBitsPerChannel = 16; _streamFormatOutput.mChannelsPerFrame = 1; _streamFormatOutput.mBytesPerPacket = 2; _streamFormatOutput.mBytesPerFrame = 2; _streamFormatOutput.mFramesPerPacket = 1; _streamFormatOutput.mSampleRate = 44100; _streamFormatOutput.mReserved = 0; and what i want to do is to extract an audio channel(Left channel or right channel) from an LPCM buffer based on the input format to make it mono in the output format. Some logic code to convert is as follows This is to set the channel map for PCM output file SInt32 channelMap[1] = {0}; status = AudioConverterSetProperty(converter, kAudioConverterChannelMap, sizeof(channelMap), channelMap); and this is to convert the buffer in a while loop AudioBufferList audioBufferList; CMBlockBufferRef blockBuffer; CMSampleBufferGetAudioBufferListWithRetainedBlockBuffer(sampBuffer, NULL, &audioBufferList, sizeof(audioBufferList), NULL, NULL, 0, &blockBuffer); for (int y=0; y<audioBufferList.mNumberBuffers; y++) { AudioBuffer audioBuffer = audioBufferList.mBuffers[y]; //frames = audioBuffer.mData; NSLog(@"the number of channel for buffer number %d is %d",y,audioBuffer.mNumberChannels); NSLog(@"The buffer size is %d",audioBuffer.mDataByteSize); numBytesIO = audioBuffer.mDataByteSize; convertedBuf = malloc(sizeof(char)*numBytesIO); status = AudioConverterConvertBuffer(converter, audioBuffer.mDataByteSize, audioBuffer.mData, &numBytesIO, convertedBuf); char errchar[10]; NSLog(@"status audio converter convert %d",status); if (status != 0) { NSLog(@"Fail conversion"); assert(0); } NSLog(@"Bytes converted %d",numBytesIO); status = AudioFileWriteBytes(mRecordFile, YES, countByteBuf, &numBytesIO, convertedBuf); NSLog(@"status for writebyte %d, bytes written %d",status,numBytesIO); free(convertedBuf); if (numBytesIO != audioBuffer.mDataByteSize) { NSLog(@"Something wrong in writing"); assert(0); } countByteBuf = countByteBuf + numBytesIO; But the insz problem is there... so it cant convert. I would appreciate any input Thanks in advance

Read the article

Syncing Data with a Server using Silverlight and HTTP Polling Duplex

- by dwahlin

Many applications have the need to stay in-sync with data provided by a service. Although web applications typically rely on standard polling techniques to check if data has changed, Silverlight provides several interesting options for keeping an application in-sync that rely on server “push” technologies. A few years back I wrote several blog posts covering different “push” technologies available in Silverlight that rely on sockets or HTTP Polling Duplex. We recently had a project that looked like it could benefit from pushing data from a server to one or more clients so I thought I’d revisit the subject and provide some updates to the original code posted. If you’ve worked with AJAX before in Web applications then you know that until browsers fully support web sockets or other duplex (bi-directional communication) technologies that it’s difficult to keep applications in-sync with a server without relying on polling. The problem with polling is that you have to check for changes on the server on a timed-basis which can often be wasteful and take up unnecessary resources. With server “push” technologies, data can be pushed from the server to the client as it changes. Once the data is received, the client can update the user interface as appropriate. Using “push” technologies allows the client to listen for changes from the data but stay 100% focused on client activities as opposed to worrying about polling and asking the server if anything has changed. Silverlight provides several options for pushing data from a server to a client including sockets, TCP bindings and HTTP Polling Duplex. Each has its own strengths and weaknesses as far as performance and setup work with HTTP Polling Duplex arguably being the easiest to setup and get going. In this article I’ll demonstrate how HTTP Polling Duplex can be used in Silverlight 4 applications to push data and show how you can create a WCF server that provides an HTTP Polling Duplex binding that a Silverlight client can consume. What is HTTP Polling Duplex? Technologies that allow data to be pushed from a server to a client rely on duplex functionality. Duplex (or bi-directional) communication allows data to be passed in both directions. A client can call a service and the server can call the client. HTTP Polling Duplex (as its name implies) allows a server to communicate with a client without forcing the client to constantly poll the server. It has the benefit of being able to run on port 80 making setup a breeze compared to the other options which require specific ports to be used and cross-domain policy files to be exposed on port 943 (as with sockets and TCP bindings). Having said that, if you’re looking for the best speed possible then sockets and TCP bindings are the way to go. But, they’re not the only game in town when it comes to duplex communication. The first time I heard about HTTP Polling Duplex (initially available in Silverlight 2) I wasn’t exactly sure how it was any better than standard polling used in AJAX applications. I read the Silverlight SDK, looked at various resources and generally found the following definition unhelpful as far as understanding the actual benefits that HTTP Polling Duplex provided: "The Silverlight client periodically polls the service on the network layer, and checks for any new messages that the service wants to send on the callback channel. The service queues all messages sent on the client callback channel and delivers them to the client when the client polls the service." Although the previous definition explained the overall process, it sounded as if standard polling was used. Fortunately, Microsoft’s Scott Guthrie provided me with a more clear definition several years back that explains the benefits provided by HTTP Polling Duplex quite well (used with his permission): "The [HTTP Polling Duplex] duplex support does use polling in the background to implement notifications – although the way it does it is different than manual polling. It initiates a network request, and then the request is effectively “put to sleep” waiting for the server to respond (it doesn’t come back immediately). The server then keeps the connection open but not active until it has something to send back (or the connection times out after 90 seconds – at which point the duplex client will connect again and wait). This way you are avoiding hitting the server repeatedly – but still get an immediate response when there is data to send." After hearing Scott’s definition the light bulb went on and it all made sense. A client makes a request to a server to check for changes, but instead of the request returning immediately, it parks itself on the server and waits for data. It’s kind of like waiting to pick up a pizza at the store. Instead of calling the store over and over to check the status, you sit in the store and wait until the pizza (the request data) is ready. Once it’s ready you take it back home (to the client). This technique provides a lot of efficiency gains over standard polling techniques even though it does use some polling of its own as a request is initially made from a client to a server. So how do you implement HTTP Polling Duplex in your Silverlight applications? Let’s take a look at the process by starting with the server. Creating an HTTP Polling Duplex WCF Service Creating a WCF service that exposes an HTTP Polling Duplex binding is straightforward as far as coding goes. Add some one way operations into an interface, create a client callback interface and you’re ready to go. The most challenging part comes into play when configuring the service to properly support the necessary binding and that’s more of a cut and paste operation once you know the configuration code to use. To create an HTTP Polling Duplex service you’ll need to expose server-side and client-side interfaces and reference the System.ServiceModel.PollingDuplex assembly (located at C:\Program Files (x86)\Microsoft SDKs\Silverlight\v4.0\Libraries\Server on my machine) in the server project. For the demo application I upgraded a basketball simulation service to support the latest polling duplex assemblies. The service simulates a simple basketball game using a Game class and pushes information about the game such as score, fouls, shots and more to the client as the game changes over time. Before jumping too far into the game push service, it’s important to discuss two interfaces used by the service to communicate in a bi-directional manner. The first is called IGameStreamService and defines the methods/operations that the client can call on the server (see Listing 1). The second is IGameStreamClient which defines the callback methods that a server can use to communicate with a client (see Listing 2). [ServiceContract(Namespace = "Silverlight", CallbackContract = typeof(IGameStreamClient))] public interface IGameStreamService { [OperationContract(IsOneWay = true)] void GetTeamData(); } Listing 1. The IGameStreamService interface defines server operations that can be called on the server. [ServiceContract] public interface IGameStreamClient { [OperationContract(IsOneWay = true)] void ReceiveTeamData(List<Team> teamData); [OperationContract(IsOneWay = true, AsyncPattern=true)] IAsyncResult BeginReceiveGameData(GameData gameData, AsyncCallback callback, object state); void EndReceiveGameData(IAsyncResult result); } Listing 2. The IGameStreamClient interfaces defines client operations that a server can call. The IGameStreamService interface is decorated with the standard ServiceContract attribute but also contains a value for the CallbackContract property. This property is used to define the interface that the client will expose (IGameStreamClient in this example) and use to receive data pushed from the service. Notice that each OperationContract attribute in both interfaces sets the IsOneWay property to true. This means that the operation can be called and passed data as appropriate, however, no data will be passed back. Instead, data will be pushed back to the client as it’s available. Looking through the IGameStreamService interface you can see that the client can request team data whereas the IGameStreamClient interface allows team and game data to be received by the client. One interesting point about the IGameStreamClient interface is the inclusion of the AsyncPattern property on the BeginReceiveGameData operation. I initially created this operation as a standard one way operation and it worked most of the time. However, as I disconnected clients and reconnected new ones game data wasn’t being passed properly. After researching the problem more I realized that because the service could take up to 7 seconds to return game data, things were getting hung up. By setting the AsyncPattern property to true on the BeginReceivedGameData operation and providing a corresponding EndReceiveGameData operation I was able to get around this problem and get everything running properly. I’ll provide more details on the implementation of these two methods later in this post. Once the interfaces were created I moved on to the game service class. The first order of business was to create a class that implemented the IGameStreamService interface. Since the service can be used by multiple clients wanting game data I added the ServiceBehavior attribute to the class definition so that I could set its InstanceContextMode to InstanceContextMode.Single (in effect creating a Singleton service object). Listing 3 shows the game service class as well as its fields and constructor. [ServiceBehavior(ConcurrencyMode = ConcurrencyMode.Multiple, InstanceContextMode = InstanceContextMode.Single)] public class GameStreamService : IGameStreamService { object _Key = new object(); Game _Game = null; Timer _Timer = null; Random _Random = null; Dictionary<string, IGameStreamClient> _ClientCallbacks = new Dictionary<string, IGameStreamClient>(); static AsyncCallback _ReceiveGameDataCompleted = new AsyncCallback(ReceiveGameDataCompleted); public GameStreamService() { _Game = new Game(); _Timer = new Timer { Enabled = false, Interval = 2000, AutoReset = true }; _Timer.Elapsed += new ElapsedEventHandler(_Timer_Elapsed); _Timer.Start(); _Random = new Random(); }} Listing 3. The GameStreamService implements the IGameStreamService interface which defines a callback contract that allows the service class to push data back to the client. By implementing the IGameStreamService interface, GameStreamService must supply a GetTeamData() method which is responsible for supplying information about the teams that are playing as well as individual players. GetTeamData() also acts as a client subscription method that tracks clients wanting to receive game data. Listing 4 shows the GetTeamData() method. public void GetTeamData() { //Get client callback channel var context = OperationContext.Current; var sessionID = context.SessionId; var currClient = context.GetCallbackChannel<IGameStreamClient>(); context.Channel.Faulted += Disconnect; context.Channel.Closed += Disconnect; IGameStreamClient client; if (!_ClientCallbacks.TryGetValue(sessionID, out client)) { lock (_Key) { _ClientCallbacks[sessionID] = currClient; } } currClient.ReceiveTeamData(_Game.GetTeamData()); //Start timer which when fired sends updated score information to client if (!_Timer.Enabled) { _Timer.Enabled = true; } } Listing 4. The GetTeamData() method subscribes a given client to the game service and returns. The key the line of code in the GetTeamData() method is the call to GetCallbackChannel<IGameStreamClient>(). This method is responsible for accessing the calling client’s callback channel. The callback channel is defined by the IGameStreamClient interface shown earlier in Listing 2 and used by the server to communicate with the client. Before passing team data back to the client, GetTeamData() grabs the client’s session ID and checks if it already exists in the _ClientCallbacks dictionary object used to track clients wanting callbacks from the server. If the client doesn’t exist it adds it into the collection. It then pushes team data from the Game class back to the client by calling ReceiveTeamData(). Since the service simulates a basketball game, a timer is then started if it’s not already enabled which is then used to randomly send data to the client. When the timer fires, game data is pushed down to the client. Listing 5 shows the _Timer_Elapsed() method that is called when the timer fires as well as the SendGameData() method used to send data to the client. void _Timer_Elapsed(object sender, ElapsedEventArgs e) { int interval = _Random.Next(3000, 7000); lock (_Key) { _Timer.Interval = interval; _Timer.Enabled = false; } SendGameData(_Game.GetGameData()); } private void SendGameData(GameData gameData) { var cbs = _ClientCallbacks.Where(cb => ((IContextChannel)cb.Value).State == CommunicationState.Opened); for (int i = 0; i < cbs.Count(); i++) { var cb = cbs.ElementAt(i).Value; try { cb.BeginReceiveGameData(gameData, _ReceiveGameDataCompleted, cb); } catch (TimeoutException texp) { //Log timeout error } catch (CommunicationException cexp) { //Log communication error } } lock (_Key) _Timer.Enabled = true; } private static void ReceiveGameDataCompleted(IAsyncResult result) { try { ((IGameStreamClient)(result.AsyncState)).EndReceiveGameData(result); } catch (CommunicationException) { // empty } catch (TimeoutException) { // empty } } LIsting 5. _Timer_Elapsed is used to simulate time in a basketball game. When _Timer_Elapsed() fires the SendGameData() method is called which iterates through the clients wanting to be notified of changes. As each client is identified, their respective BeginReceiveGameData() method is called which ultimately pushes game data down to the client. Recall that this method was defined in the client callback interface named IGameStreamClient shown earlier in Listing 2. Notice that BeginReceiveGameData() accepts _ReceiveGameDataCompleted as its second parameter (an AsyncCallback delegate defined in the service class) and passes the client callback as the third parameter. The initial version of the sample application had a standard ReceiveGameData() method in the client callback interface. However, sometimes the client callbacks would work properly and sometimes they wouldn’t which was a little baffling at first glance. After some investigation I realized that I needed to implement an asynchronous pattern for client callbacks to work properly since 3 – 7 second delays are occurring as a result of the timer. Once I added the BeginReceiveGameData() and ReceiveGameDataCompleted() methods everything worked properly since each call was handled in an asynchronous manner. The final task that had to be completed to get the server working properly with HTTP Polling Duplex was adding configuration code into web.config. In the interest of brevity I won’t post all of the code here since the sample application includes everything you need. However, Listing 6 shows the key configuration code to handle creating a custom binding named pollingDuplexBinding and associate it with the service’s endpoint. <bindings> <customBinding> <binding name="pollingDuplexBinding"> <binaryMessageEncoding /> <pollingDuplex maxPendingSessions="2147483647" maxPendingMessagesPerSession="2147483647" inactivityTimeout="02:00:00" serverPollTimeout="00:05:00"/> <httpTransport /> </binding> </customBinding> </bindings> <services> <service name="GameService.GameStreamService" behaviorConfiguration="GameStreamServiceBehavior"> <endpoint address="" binding="customBinding" bindingConfiguration="pollingDuplexBinding" contract="GameService.IGameStreamService"/> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> </service> </services> Listing 6. Configuring an HTTP Polling Duplex binding in web.config and associating an endpoint with it. Calling the Service and Receiving “Pushed” Data Calling the service and handling data that is pushed from the server is a simple and straightforward process in Silverlight. Since the service is configured with a MEX endpoint and exposes a WSDL file, you can right-click on the Silverlight project and select the standard Add Service Reference item. After the web service proxy is created you may notice that the ServiceReferences.ClientConfig file only contains an empty configuration element instead of the normal configuration elements created when creating a standard WCF proxy. You can certainly update the file if you want to read from it at runtime but for the sample application I fed the service URI directly to the service proxy as shown next: var address = new EndpointAddress("http://localhost.:5661/GameStreamService.svc"); var binding = new PollingDuplexHttpBinding(); _Proxy = new GameStreamServiceClient(binding, address); _Proxy.ReceiveTeamDataReceived += _Proxy_ReceiveTeamDataReceived; _Proxy.ReceiveGameDataReceived += _Proxy_ReceiveGameDataReceived; _Proxy.GetTeamDataAsync(); This code creates the proxy and passes the endpoint address and binding to use to its constructor. It then wires the different receive events to callback methods and calls GetTeamDataAsync(). Calling GetTeamDataAsync() causes the server to store the client in the server-side dictionary collection mentioned earlier so that it can receive data that is pushed. As the server-side timer fires and game data is pushed to the client, the user interface is updated as shown in Listing 7. Listing 8 shows the _Proxy_ReceiveGameDataReceived() method responsible for handling the data and calling UpdateGameData() to process it. Listing 7. The Silverlight interface. Game data is pushed from the server to the client using HTTP Polling Duplex. void _Proxy_ReceiveGameDataReceived(object sender, ReceiveGameDataReceivedEventArgs e) { UpdateGameData(e.gameData); } private void UpdateGameData(GameData gameData) { //Update Score this.tbTeam1Score.Text = gameData.Team1Score.ToString(); this.tbTeam2Score.Text = gameData.Team2Score.ToString(); //Update ball visibility if (gameData.Action != ActionsEnum.Foul) { if (tbTeam1.Text == gameData.TeamOnOffense) { AnimateBall(this.BB1, this.BB2); } else //Team 2 { AnimateBall(this.BB2, this.BB1); } } if (this.lbActions.Items.Count > 9) this.lbActions.Items.Clear(); this.lbActions.Items.Add(gameData.LastAction); if (this.lbActions.Visibility == Visibility.Collapsed) this.lbActions.Visibility = Visibility.Visible; } private void AnimateBall(Image onBall, Image offBall) { this.FadeIn.Stop(); Storyboard.SetTarget(this.FadeInAnimation, onBall); Storyboard.SetTarget(this.FadeOutAnimation, offBall); this.FadeIn.Begin(); } Listing 8. As the server pushes game data, the client’s _Proxy_ReceiveGameDataReceived() method is called to process the data. In a real-life application I’d go with a ViewModel class to handle retrieving team data, setup data bindings and handle data that is pushed from the server. However, for the sample application I wanted to focus on HTTP Polling Duplex and keep things as simple as possible. Summary Silverlight supports three options when duplex communication is required in an application including TCP bindins, sockets and HTTP Polling Duplex. In this post you’ve seen how HTTP Polling Duplex interfaces can be created and implemented on the server as well as how they can be consumed by a Silverlight client. HTTP Polling Duplex provides a nice way to “push” data from a server while still allowing the data to flow over port 80 or another port of your choice. Sample Application Download

Read the article

Examples of bad variable names and reasons [on hold]

- by user470184

I'll start with a class in the jdk package : public final class Sdp { should be : public final class SocketsDirectProtocol { Sdp is class name, this is ambigious, should be : Class<?> cl = Class.forName("java.net.SdpSocketImpl", true, null); should be : Class<?> clazz = Class.forName("java.net.SdpSocketImpl", true, null); cl is ambiguous private static void setAccessible(final AccessibleObject o) { should be : private static void setAccessible(final AccessibleObject accessibleObject) { There are various other examples in this class, do you have similar and/or differing examples of variables that were named badly ? package com.oracle.net; public final class Sdp { private Sdp() { } /** * The package-privage ServerSocket(SocketImpl) constructor */ private static final Constructor<ServerSocket> serverSocketCtor; static { try { serverSocketCtor = (Constructor<ServerSocket>) ServerSocket.class.getDeclaredConstructor(SocketImpl.class); setAccessible(serverSocketCtor); } catch (NoSuchMethodException e) { throw new AssertionError(e); } } /** * The package-private SdpSocketImpl() constructor */ private static final Constructor<SocketImpl> socketImplCtor; static { try { Class<?> cl = Class.forName("java.net.SdpSocketImpl", true, null); socketImplCtor = (Constructor<SocketImpl>)cl.getDeclaredConstructor(); setAccessible(socketImplCtor); } catch (ClassNotFoundException e) { throw new AssertionError(e); } catch (NoSuchMethodException e) { throw new AssertionError(e); } } private static void setAccessible(final AccessibleObject o) { AccessController.doPrivileged(new PrivilegedAction<Void>() { public Void run() { o.setAccessible(true); return null; } }); } /** * SDP enabled Socket. */ private static class SdpSocket extends Socket { SdpSocket(SocketImpl impl) throws SocketException { super(impl); } } /** * Creates a SDP enabled SocketImpl */ private static SocketImpl createSocketImpl() { try { return socketImplCtor.newInstance(); } catch (InstantiationException x) { throw new AssertionError(x); } catch (IllegalAccessException x) { throw new AssertionError(x); } catch (InvocationTargetException x) { throw new AssertionError(x); } } /** * Creates an unconnected and unbound SDP socket. The {@code Socket} is * associated with a {@link java.net.SocketImpl} of the system-default type. * * @return a new Socket * * @throws UnsupportedOperationException * If SDP is not supported * @throws IOException * If an I/O error occurs */ public static Socket openSocket() throws IOException { SocketImpl impl = createSocketImpl(); return new SdpSocket(impl); } /** * Creates an unbound SDP server socket. The {@code ServerSocket} is * associated with a {@link java.net.SocketImpl} of the system-default type. * * @return a new ServerSocket * * @throws UnsupportedOperationException * If SDP is not supported * @throws IOException * If an I/O error occurs */ public static ServerSocket openServerSocket() throws IOException { // create ServerSocket via package-private constructor SocketImpl impl = createSocketImpl(); try { return serverSocketCtor.newInstance(impl); } catch (IllegalAccessException x) { throw new AssertionError(x); } catch (InstantiationException x) { throw new AssertionError(x); } catch (InvocationTargetException x) { Throwable cause = x.getCause(); if (cause instanceof IOException) throw (IOException)cause; if (cause instanceof RuntimeException) throw (RuntimeException)cause; throw new RuntimeException(x); } } /** * Opens a socket channel to a SDP socket. * * <p> The channel will be associated with the system-wide default * {@link java.nio.channels.spi.SelectorProvider SelectorProvider}. * * @return a new SocketChannel * * @throws UnsupportedOperationException * If SDP is not supported or not supported by the default selector * provider * @throws IOException * If an I/O error occurs. */ public static SocketChannel openSocketChannel() throws IOException { FileDescriptor fd = SdpSupport.createSocket(); return sun.nio.ch.Secrets.newSocketChannel(fd); } /** * Opens a socket channel to a SDP socket. * * <p> The channel will be associated with the system-wide default * {@link java.nio.channels.spi.SelectorProvider SelectorProvider}. * * @return a new ServerSocketChannel * * @throws UnsupportedOperationException * If SDP is not supported or not supported by the default selector * provider * @throws IOException * If an I/O error occurs */ public static ServerSocketChannel openServerSocketChannel() throws IOException { FileDescriptor fd = SdpSupport.createSocket(); return sun.nio.ch.Secrets.newServerSocketChannel(fd); } }

Read the article

SSH / SFTP connection issue using Tamir.SharpSsh

- by jinsungy

This is my code to connect and send a file to a remote SFTP server. public static void SendDocument(string fileName, string host, string remoteFile, string user, string password) { Scp scp = new Scp(); scp.OnConnecting += new FileTansferEvent(scp_OnConnecting); scp.OnStart += new FileTansferEvent(scp_OnProgress); scp.OnEnd += new FileTansferEvent(scp_OnEnd); scp.OnProgress += new FileTansferEvent(scp_OnProgress); try { scp.To(fileName, host, remoteFile, user, password); } catch (Exception e) { throw e; } } I can successfully connect, send and receive files using CoreFTP. Thus, the issue is not with the server. When I run the above code, the process seems to stop at the scp.To method. It just hangs indefinitely. Anyone know what might my problem be? Maybe it has something to do with adding the key to the a SSH Cache? If so, how would I go about this? EDIT: I inspected the packets using wireshark and discovered that my computer is not executing the Diffie-Hellman Key Exchange Init. This must be the issue. EDIT: I ended up using the following code. Note, the StrictHostKeyChecking was turned off to make things easier. JSch jsch = new JSch(); jsch.setKnownHosts(host); Session session = jsch.getSession(user, host, 22); session.setPassword(password); System.Collections.Hashtable hashConfig = new System.Collections.Hashtable(); hashConfig.Add("StrictHostKeyChecking", "no"); session.setConfig(hashConfig); try { session.connect(); Channel channel = session.openChannel("sftp"); channel.connect(); ChannelSftp c = (ChannelSftp)channel; c.put(fileName, remoteFile); c.exit(); } catch (Exception e) { throw e; } Thanks.

Read the article

DotNetOpenAuth: Message signature was incorrect

- by Shawn Miller

I'm getting a "Message signature was incorrect" exception when trying to authenticate with MyOpenID and Yahoo. I'm using pretty much the ASP.NET MVC sample code that came with DotNetOpenAuth 3.4.2 public ActionResult Authenticate(string openid) { var openIdRelyingParty = new OpenIdRelyingParty(); var authenticationResponse = openIdRelyingParty.GetResponse(); if (authenticationResponse == null) { // Stage 2: User submitting identifier Identifier identifier; if (Identifier.TryParse(openid, out identifier)) { var realm = new Realm(Request.Url.Root() + "openid"); var authenticationRequest = openIdRelyingParty.CreateRequest(openid, realm); authenticationRequest.RedirectToProvider(); } else { return RedirectToAction("login", "home"); } } else { // Stage 3: OpenID provider sending assertion response switch (authenticationResponse.Status) { case AuthenticationStatus.Authenticated: { // TODO } case AuthenticationStatus.Failed: { throw authenticationResponse.Exception; } } } return new EmptyResult(); } Working fine with Google, AOL and others. However, Yahoo and MyOpenID fall into the AuthenticationStatus.Failed case with the following exception: DotNetOpenAuth.Messaging.Bindings.InvalidSignatureException: Message signature was incorrect. at DotNetOpenAuth.OpenId.ChannelElements.SigningBindingElement.ProcessIncomingMessage(IProtocolMessage message) in c:\Users\andarno\git\dotnetopenid\src\DotNetOpenAuth\OpenId\ChannelElements\SigningBindingElement.cs:line 139 at DotNetOpenAuth.Messaging.Channel.ProcessIncomingMessage(IProtocolMessage message) in c:\Users\andarno\git\dotnetopenid\src\DotNetOpenAuth\Messaging\Channel.cs:line 992 at DotNetOpenAuth.OpenId.ChannelElements.OpenIdChannel.ProcessIncomingMessage(IProtocolMessage message) in c:\Users\andarno\git\dotnetopenid\src\DotNetOpenAuth\OpenId\ChannelElements\OpenIdChannel.cs:line 172 at DotNetOpenAuth.Messaging.Channel.ReadFromRequest(HttpRequestInfo httpRequest) in c:\Users\andarno\git\dotnetopenid\src\DotNetOpenAuth\Messaging\Channel.cs:line 386 at DotNetOpenAuth.OpenId.RelyingParty.OpenIdRelyingParty.GetResponse(HttpRequestInfo httpRequestInfo) in c:\Users\andarno\git\dotnetopenid\src\DotNetOpenAuth\OpenId\RelyingParty\OpenIdRelyingParty.cs:line 540 Appears that others are having the same problem: http://trac.dotnetopenauth.net:8000/ticket/172 Does anyone have a workaround?

Read the article

Invalid message signature when running OpenId Provider on Cluster

- by Garth

Introduction We have an OpenID Provider which we created using the DotNetOpenAuth component. Everything works great when we run the provider on a single node, but when we move the provider to a load balanced cluster where multiple servers are handling requests for each session we get issue with the message signing as the DotNetOpenAuth component seems to be using something unique from each cluster node to create the signature. Exception DotNetOpenAuth.Messaging.Bindings.InvalidSignatureException: Message signature was incorrect. at DotNetOpenAuth.OpenId.ChannelElements.SigningBindingElement.ProcessIncomingMessage(IProtocolMessage message) in c:\BuildAgent\work\7ab20c0d948e028f\src\DotNetOpenAuth\OpenId\ChannelElements\SigningBindingElement.cs:line 139 at DotNetOpenAuth.Messaging.Channel.ProcessIncomingMessage(IProtocolMessage message) in c:\BuildAgent\work\7ab20c0d948e028f\src\DotNetOpenAuth\Messaging\Channel.cs:line 940 at DotNetOpenAuth.OpenId.ChannelElements.OpenIdChannel.ProcessIncomingMessage(IProtocolMessage message) in c:\BuildAgent\work\7ab20c0d948e028f\src\DotNetOpenAuth\OpenId\ChannelElements\OpenIdChannel.cs:line 172 at DotNetOpenAuth.Messaging.Channel.ReadFromRequest(HttpRequestInfo httpRequest) in c:\BuildAgent\work\7ab20c0d948e028f\src\DotNetOpenAuth\Messaging\Channel.cs:line 378 at DotNetOpenAuth.OpenId.RelyingParty.OpenIdRelyingParty.GetResponse(HttpRequestInfo httpRequestInfo) in c:\BuildAgent\work\7ab20c0d948e028f\src\DotNetOpenAuth\OpenId\RelyingParty\OpenIdRelyingParty.cs:line 493 Setup We have the machine config setup to use the same machine key on all cluster nodes and we have setup an out of process session with SQL Server. Question How do we configure the key used by DotNetOpenAuth to sign its messages so that the client will trust responses from all servers in the cluster during the same session?

Read the article

Posting messages in two RabbitMQ queue, instead of one (using py-amqp)

- by Khelben

I've got this strange problem using py-amqp and the Flopsy module. I have written a publisher that sends messages to a RabbitMQ server, and I wanted to be able to send it to a specified queue. On the Flopsy module that is not possible, so I tweaked it adding a parameter and a line to declare the queue on the init_ method of the Publisher object def __init__(self, routing_key=DEFAULT_ROUTING_KEY, exchange=DEFAULT_EXCHANGE, connection=None, delivery_mode=DEFAULT_DELIVERY_MODE, queue=DEFAULT_QUEUE): self.connection = connection or Connection() self.channel = self.connection.connection.channel() self.channel.queue_declare(queue) # ADDED TO SET UP QUEUE self.exchange = exchange self.routing_key = routing_key self.delivery_mode = delivery_mode The channel object is part of the py-amqplib library The problem I've got it's that, even if it's sending the messages to the specified queue, it's ALSO sending the messages to the default queue. AS in this system we expect to send quite a lot of messages, we don't want to stress the system making useless duplicates... I've tried to debug the code and go inside the py-amqplib library, but I'm not able figure out any error or lacking step. Also, I'm not able to find any documentation form py-amqplib outside the code. Any ideas on why is this happening and how to correct it?

Search Results

Search found 2499 results on 100 pages for 'fibre channel'.

Page 22/100 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29 | Next Page >

- by Robert

- by J. Polfer

- by Bartlomiej Skwira

- by Paul Anderson -Oracle

- by Thanos

- by numerical25

- by MarkPearl

- by Jeanno

- by Katrina Gosek, Director | Commerce Product Strategy-Oracle

- by Charles Knapp

- by Rahul Mehta

- by mseika

- by Geertjan

- by skat

- by pred2040

- by BozoJoe

- by stiank81

- by kylex

- by Samuel

- by dwahlin

- by user470184

- by jinsungy

- by Shawn Miller

- by Garth

- by Khelben

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29 | Next Page >