Search Results

Search found 582 results on 24 pages for 'lcd'.

Page 22/24 | < Previous Page | 18 19 20 21 22 23 24  | Next Page >

  • Slowdown upon router/modem setup change

    - by Ollie Saunders
    I’ve been using a Belkin FSD7632-4 modem router to connect to my TalkTalk provided ADSL internet connection for some time and been pretty happy with it. Recently, however, the connection has been failing and I decided to get a ASUS RT-N16 instead, which is also a much more capable router generally. The ASUS RT-N16 doesn’t come with a modem built-in so I purchased as Zoom modem as well. I’ve set them both up and am using them to post this message. But I’m a bit miffed to find that I get a significantly and consistently slower downstream rate from the new configuration than with the old Belkin. Belkin modem router: downstream: 3.45 mbps upstream: 0.73 mbps ASUS router + Zoom modem: downstream: 2.71 mbps upstream: 0.66 mbps Any ideas why this is? The really weird thing about this is that the Zoom supports ADSL2 and ADSL2+ but I don’t think the old Belkin does. At first I thought it might be due to the Zoom modem being limited to PPPoE instead of PPPoA, which my ISP supports, but then I tried using PPPoE with the Belkin and that still gave a high speed. I’m using VC-Mux encapsulation with both. VPI of 0 and VCI of 38. I pulled this data off the Zoom: Mode: ADSL2 Line Coding: Trellis On Status: No Defect Link Power State: L0 Downstream Upstream SNR Margin (dB): 12.3 11.8 Attenuation (dB): 43.0 24.9 Output Power (dBm): 12.9 0.0 Attainable Rate (Kbps): 3936 844 Rate (Kbps): 3194 840 MSGc (number of bytes in overhead channel message): 59 10 B (number of bytes in Mux Data Frame): 99 14 M (number of Mux Data Frames in FEC Data Frame): 2 16 T (Mux Data Frames over sync bytes): 1 8 R (number of check bytes in FEC Data Frame): 8 8 S (ratio of FEC over PMD Data Frame length): 1.9833 9.0594 L (number of bits in PMD Data Frame): 839 219 D (interleaver depth): 32 2 Delay (msec): 15 4 Super Frames: 15808 14078 Super Frame Errors: 0 4294967232 RS Words: 513778 111753 RS Correctable Errors: 126 4294967238 RS Uncorrectable Errors: 0 N/A HEC Errors: 0 4294967279 OCD Errors: 0 0 LCD Errors: 0 0 Total Cells: 1920175 237597 Data Cells: 205993 392 Bit Errors: 0 0 Total ES: 0 0 Total SES: 0 0 Total UAS: 34 0

    Read the article

  • Is a Hyperthreaded CPU more powerful and more efficient than a Dual-core CPU? [closed]

    - by user1811864
    which computer to choose with Pentium processor hello they are getting rid of the old computer equipment in the office and i have to choose the computer to take home i get first choice to pick. -15 inch lcd screen 4 gb of ram core 2 duo dual Core E8400 3.00 GHz dvd writer windows vista/ linux -15 inch crt monitor with 2 gb ram and pentium 4 2 ghz single core HT technology windows xp hardisks both 250 GB my friend is telling me to choose the second one Pentium single core HT because he told me it runs faster becuase of HT technology and cooler and consumes less current electricity so it wont get overheated because it has HT technology so it's high definition for encoding and watching HD movies and HD sound and is like a gaming pc to play internet games. And also he said the dual core 8400 runs at 3 ghz compared to the 2 ghz so it heats very much because of the two extra cores so it takes more current raising electricty bills and is not good for gaming and watching HD movies and internet flash animations and games because of getting heated everytime. And he wants to choose and take the E8400 because he has air conditioning at home so it will be safe from heating. So which one computer should i take is it really faster because of the HT High definition technology and will i be able to play internet flash card games better and watch good HD movies Youtube etc and play all the music and songs.

    Read the article

  • Why does the screen resolution of 1440x900 suddenly disappears from Intel GMA Control Panel?

    - by GeneQ
    I'm using a Vostro 1200 laptop with the Mobile Intel(R) 965 Express Chipset powering its graphics and running Vista 32-bit SP2 . I've been using the Vostro with a Dell SE198WFP LCD Monitor as the external display since day one for about two years without any problems. Recently, I plugged the Vostro into a couple of other monitors. The problem is, now the native resolution for my main monitor's (the SE198WFP) resolution of 1440x900 @ 60 Hz is no longer available. (See below) I've tried everything from uninstalling and reinstalling the Intel drivers as well as the monitor drivers to no avail. I've Goggled that this problem and it appears that this has happened to other people but all the answers involve people giving up in frustration or reinstalling; both terrible outcomes. Has anybody ever figured why this happens and have a good solution? Thanks. UPDATE: This dude has a complicated solution, which I haven't tried yet. His explanations for the problem was After an exausting search for an answer to the matter of why my brand new 19? widescreen monitor’s native resolution (1440×900) was unavailible (sic) in the display properties, I finally stumbled upon an article a person posted on Intel’s forums that basically explained what shannanigans Intel had been up to with their GMA 950 line of onboard graphic solutions. Not very comforting.

    Read the article

  • How can I make sound over hdmi in kubuntu work?

    - by user32509
    I have used a hdmi cable to connect my lcd (which is connected with my speakers) with my nvida 275 gtx grafic card. I can not get the sound output to work. The hardware itself is working probably - I tested it under windows. Currently I am running Kubuntu 9.10 64 with Nvidia 190.53. The sound output worked fine before I installed the hdmi connection. (German output - i can change it, if you tell me how :)) aplay -l **** Liste von PLAYBACK Geräten **** Karte 0: Intel [HDA Intel], Gerät 0: ALC889A Analog [ALC889A Analog] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 Karte 0: Intel [HDA Intel], Gerät 1: ALC889A Digital [ALC889A Digital] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 aplay -L front:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Intel,DEV=0 HDA Intel, ALC889A Digital IEC958 (S/PDIF) Digital Audio Output null Discard all samples (playback) or generate zero samples (capture) pulse Playback/recording through the PulseAudio sound server And i disabled mute in kmix an all channels :)

    Read the article

  • Make reading more comfortable for the eyes

    - by Shiki
    First, I read the topics about displays. Sadly the "BenQ FP241WZ" is a no go, for ~715 eur it's way too much. I would need some ideas about how could I make reading less tiring. Basically I didn't have this problem back then. But now, I'm reading some books, and also, have to read a lot a day. (A LOT). I look like some hardcore 0-24 gamer when I "finish" :). Think about things like.. background color (like I read 'dark yellow' color + black tint helps), font size, fonts (!) cleartype settings (should be off?) and so on. Display: BenQ E2200 HD (yeah cheap, eek, etc. Poor-man's LCD. :)) My CRT display is far away at the minute. So that is out of question. Also, my ThinkPad is here (T500), but I don't know about it's display. It comes with 1280x800 resolution and that's all I know (you can search back from that the FRU number, but I couldn't find it now). What could I do? (Or basically everyone in such a situation?)

    Read the article

  • Sudden and frequent hangs on desktop computer: mobo or CPU fault?

    - by djechelon
    I have a desktop computer equipped with an ASUS Crosshair 2 Formula and a Phenom x6 3.2GHz CPU. My problem is that often the computer will hang all of a sudden, completely stopping responding. When that occurs, reset key is inoperative and power button turns the computer off but is unable to turn it back on. I have to physically disconnect power cable. The problem can occur anytime, when I'm booting Windows, when I'm logging in, when I'm listening to a song, when I'm browsing Internet, etc. It always occurs after very few minutes of 3D gameplay I thought it was a video card fault. I had 3 8800GTX so I could try all combinations of them: didn't fix I thought it was a RAM problem: I tried running with only a subset of my DDR2 banks but didn't fix. Almost every time I have to reset and reconfigure BIOS (without AHCI, Win7 won't boot, so I need to restore a few things). If I enable AMD Live, Cool&Quiet or other things from CPU configuration menu I'll be sure that the computer won't reach Windows desktop in 99% of cases (it randomly hangs somewhere in the boot process or even in the BIOS POST). Another interesting thing is that during the POST process the computer always takes unusually long time detecting USB devices (LCD POSTer shows USB INIT), and I've also tried disconnecting all USB devices but didn't take less time to POST BIOS revision is 2702, the latest. Today I found a different behaviour once: during boot screen I got a BSOD with error Stop 0x00000101 A clock interrupt was not received on a secondary processor within the allocated time interval, and this is usually related to overclocking, but I never overclocked my CPU. Judging from the description of my problem, hoping someone had the same and fixed, and since I don't have a spare CPU or motherboard for replacement, I'd like to ask if you think this is a problem with faulty CPU or faulty motherboard, and if I can perform additional tests (I mean software tests because of my lack of spare components) to identify the component to replace.

    Read the article

  • Adjust output Brightness/Gamma/Colors in Gnome

    - by Mikee
    We have a desktop system running Ubuntu 8.04.4, and it is connected to a standard desktop LCD monitor. Unfortunately, in 8.04.4, the brightness of the image is cranked way up. It appears to be a graphics driver issue. Unfortunately, installing a newer GPU driver for this Intel GPU is very difficult to do. So, I am looking for a software (or config file?) solution to achieve this. Note: Ubuntu 9.10 and higher do not exhibit this issue, so this is not a hardware problem. Note: VNC-ing to this machine from another does not exhibit this issue either. Also, I installed "DisplayCalibrator.app", and it does not work very well (the app comes up, but the contents of the window are blank). Is there anything that I can add to the xorg.conf file to correct this issue? Also, this solution: http://superuser.com/questions/96539/adjust-contrast-and-brightness-in-ubuntu did not resove my issue. Thank you all for the help!

    Read the article

  • How to play 24 fps video smoothly on a 60Hz display? (or which player supports frame interpolation?)

    - by netvope
    I use mpc-hc to play videos on Win7 x64. With the default settings (#1), video playback is great most of the time. But for panning shots, playback is not smooth. I stepped through the video frame by frame and found that the panning movement is smooth (e.g. each frame shifts horizontally by 10 pixels), so the problem is how the 23.976 fps video is interpolated to 60Hz. The judder looks like what would be caused by a "2:3 pulldown", where the frames are played unevenly like: frame 1, 1, 2, 2, 2, 3, 3, 4, 4, 4, etc (#2) Using "optimal renderer settings" (#3) instead of the default disables the Aero theme and causes tearing. Setting my LCD display to 50Hz may have improved the judder slightly (but I can't really tell). My display does not support 24Hz or 48Hz, and forcing them in the Nvidia control panel gives blurry screen. I've tried other video players (VLC and KMPlayer), the ReClock Directshow Filter, video files from different sources (#4), turning on/off DXVA, and a computer with a different GPU, but the judder in the playback is similar. None of them solved the problem. So, how can I play 23.976 or 24 fps video smoothly on a 60Hz display? I think a video player could make the video smoother by doing linear interpolation, such as: 1. 100% frame 1 2. 60% frame 1 + 40% frame 2 3. 20% frame 1 + 80% frame 2 4. 80% frame 2 + 20% frame 3 5. 40% frame 2 + 60% frame 3 6. 100% frame 3 7. 60% frame 3 + 40% frame 4 .. etc Can any existing video player do this? Footnotes: (#1) Video renderer: EVR Custom Pres. (#2) This example converts a 24 fps video into 30 fps (#3) View Renderer settings Reset Reset to optimal renderer settings (#4) The files I have are all H.264 mkv files, but I don't think the file format/encoding matters.

    Read the article

  • Recommended Smartphone for Reading PDFs [closed]

    - by mika
    This is as much a software than a hardware question. I use a lot of public transport and perhaps the best way to spend your time there is to read while listening to music. Currently I use Nokia E90 and Adobe Reader LE 2.5 (full version). I was wondering if there are any better alternatives? Requirements: at least 640px wide screen, preferably 800px physical size of the LCD display matters, it should be large, but the phone itself should be as small as possible. This favors touchscreen models PDF reader should be of high quality. It should render most PDFs correctly. Other important features include: full screen mode, keyboard controls for Page Down and page change, multiple zoom levels to adjust to the screen, opening recent documents at the last page read Downsides of E90 + Adobe Reader LE Phone is large compared to the display It is hard to read the display at sunlight Adobe Reader crashes the phone regularly, zoom could have more levels, doesn't remember last page EDIT: Switched to iPhone and GoodReader. Smaller physical screen width compared to E90 is a disimprovement, but other than that I'm happy. GoodReader is the highest quality smartphone PDF reader I've seen so far.

    Read the article

  • HP EliteBook 8440P - USB ports stop working on docking station

    - by r0ca
    I have a HP Elitebook 8440P running Windows XP Pro SP3. I installed it on my docking station and everything went smooth for a while. Last week, my mouse and any other USB devices stoped working sudenly... It was working fine on my laptop itself but nothing on my docking station. LCD attached monitor works and same for LAN and PS2 keyboard. I updated the BIOS, Chipset, Video Drivers, also changed my docking station by a brand new one but the problem still comes back. I also noticed something in Device Manager... A Generic USB Root Hub has an error on it, a Yellow/Orange exclamation mark. I tried to update that driver but no luck. Windows is unable to process it. This seems to be the problem but can't fix it. I may only re-image my laptop but for me, I need to avoid that since I have so many apps installed on it. If anybody has any advice, I'll take it!

    Read the article

  • MacBook Pro (2007 - ATI-Card) Screen goes half black then shuts down the entire computer

    - by BluePerry
    Hey, when I'm starting my MBP I get about 10-60 seconds of the booting process before the screen goes half black (Its like applying a black to transparent gradient from the left side of the screen to the middle of the screen). After a 5 seconds the entire screen blacks out and the MBP shuts down. There have been issues with heat and some minor artifacts on the screen in the past but nothing serious as far as I know. Everything could be resolved by rebooting or letting the MBP cool down a bit. I would like to identify the problem now. There are 3 possibilities I can think of right now: My graphics card is defect and shuts down after a few seconds. (But if thats true, I find it kind of hard to explain the HALF black screen) My LCD-Panel is defect and sends back wrong signals so the system shuts down??? (I not sure about that) My fan or/and thermal sensors are defect and forcing the graphics card to shut down. Can anyone point if I'm right or if there yet another reason for this. I'd be thankful for any hint or tips. Cheers, Per

    Read the article

  • What to do with old laptop screens?

    - by Lord Torgamus
    This question is inspired by another SU question I came across earlier today: What to do with old hard drives? It made me think about two long-dead laptops I have with perfectly good screens still inside. One is a Dell Inspiron 5100 and the other is an Averatec E1200, but responses need not be geared towards those particular models' screens. Rules, based heavily on the original question's: Objectives and suggestions to keep in mind when you post an answer : Should showcase your geekiness, be plain ol' fun, serve a social purpose or benefit the community. Your answer need not be limited to only one screen. For a really good answer, I'll go out and buy additional leftover screens. Your answer need not be limited to one project per screen. If additional accessories need be purchased, make sure they are common. Don't tell me to get a moon rock or something. The projects you suggested should serve a useful purpose; art is nice, but functional art is way better. Thanks in advance, folks. EDIT: Found another related question. Fun projects to do with an old 17" LCD monitor EDIT 2: I, for one, am enjoying the new outpouring of creativity here. Best fifty bucks... I mean, rep points... I ever spent. EDIT 3: That does it. At the end of the week, there was a tie for most votes between the accepted answer and the game platform answer. The game platform answer was cooler, but less reasonable as a project to actually do; in other words, it was more moon rocky. Unfortunately, I think fencepost had the best comment on the topic, which is that displays on their own have no good interface. Thanks for playing, everyone!

    Read the article

  • Diagnosing RAM issues

    - by TaylorND
    I have an old Acer Aspire T180 desktop. The specs are as follows: AMD Athlon 64 3800+ 2.4GHz 1GB DDR2 SDRAM 160GB DVD-Writer (DVD±R/±RW) Gigabit Ethernet 17" Active Matrix TFT Color LCD Windows Vista Home Basic Mini-tower AST180-UA381B According to the information in the computer's documentation the computer comes with 1 GB of RAM. It has two DDR2 SDRAM sticks. I used to have Windows Vista installed. Then I removed it and install Windows 7, and now I have since removed Windows 7 and installed Windows XP. According to Windows XP with both RAM sticks in the computer has 768 MB. Isn't this supposed to be 1 GB of RAM or 1024 MB of RAM? Is the amount of RAM installed only partly used by the Operating System? Is there's something I'm missing? If I remove either one of the RAM sticks I'm left with 448 MB of RAM. These numbers don't seem to add up. If each of the RAM sticks contains at least 448 MB of RAM shouldn't they (both being in) provide 896 MB of RAM. Even then, isn't that less than a GB of RAM? I'm not too experienced in hardware so I thought this would be the best place to ask. As a follow up question, is the RAM I have enough to run/multitask with Windows XP efficiently? I plan to do a lot of computing with the system (although not gaming), should I invest in more RAM?

    Read the article

  • Rendering a frame is producing noise from speakers in Windows and Linux

    - by Robber
    When any hardware accelerated application is rendering a frame (or many of them) a very short noise is coming from my speakers. This can be a game, a WebGL application or XBMC. When the application/game is rendering many frames per second (like most of them do) the noise is a continuous buzzing that gets higher pitched with higher framerates. This applies to Linux and Windows, so I'd assume it's a hardware problem. The current hardware in the PC is: CPU: Core2Quad Q9550 GPU: Radeon HD 5770 RAM: 2x2GB DDR2 Motherboard: Asus P5QLD PRO PSU: be quiet! Pure Power 530W Screen and speakers: Old 720p LCD TV connected via VGA and aux cable Muting the TV stops the noise, muting Windows doesn't. I tried replacing the PSU first (used a Tagan 700W PSU before) because I thought it was a power problem. It wasn't. I tried replacing the motherboard (used a ASUS P5B SE before) next because I thought it was a sound card problem. It wasn't. I tried the GPU in a different PC because I thought it was a broken graphics card. It worked perfectly fine in the other PC. I thought it might be interference, but moving the audio cable around changes absolutely nothing. I tried using an HDMI cable instead and that did work, but is not an option since my TV has only one HDMI input and I need that for my PS3.

    Read the article

  • Ubuntu problem - monitor out of range

    - by Kelp
    Hello, I am using an external monitor for my laptop to run Ubuntu with. I just updated Ubuntu today, but when it is about to reach the Ubuntu login screen, then the monitor says "out of range." Now, Ubuntu boots up into the GUI if I unplug my monitor and use my laptop screen, but I prefer to use the external display. I have tried all of the suggestions from my search results in Google. I tried pressing Ctrl + Alt + +, but nothing happens. I tried pressing Ctrl + Alt + -, but nothing happens. I used Ctrl + Alt + F2 to get into a terminal to run the command: sudo dpkg-reconfigure xserver-xorg, but nothing happens. I believe there are supposed to be options to change the settings, but it does not even give me any. I tried to edit /etc/usplash.conf and /nano/etc/usplash.conf, but they do not exist. I did sudo apt-get update and sudo apt-get upgrade hoping that it would install drivers or something to help my situation, but they did not help. My monitor is a Westinghouse 22" LCD with resolution 1680x1050. It has been working for the past few months until I updated it today.

    Read the article

  • How to stop Vista from auto changing video resolution?

    - by bialix
    I have new Acer Aspire Revo R3600 computer with Vista pre-installed. The computer has NVidia video adapter. While connecting 17" LCD monitor (LG L1742S) via VGA cable it works fine, and I can change the resolution of the display from max 1920*1024 down to some other value, and after reboot the settings are restored correctly. But when I'm connecting bigger full HD 1920*1080 display (LG E2250) via VGA cable then every boot I have the same problem: I see boot progress window, then I see MS logo, then I see welcome screen then I start to see desktop and suddenly monitor switch off and show me the message about unsupported frequency of input signal As I understand Vista tries to auto-change resolution and sets wrong parameters. I've tried to boot into safe mode and into low-resolution mode, every time I have the same problem: Vista boot-up and suddenly monitor stops working. I've tried to connect this monitor to notebook with Windows XP and has no problem to work with this display on its native resolution. How can I disable this display resolution auto-changer in Vista? Or maybe there is another workaround?

    Read the article

  • Looking for Hardware that will easily interface with my .NET code.

    - by SkippyFire
    I'm a .NET C# developer looking to do some hardware interfacing/programming. I just want something super simple to mess around with. I have done one of those basic stamp projects, but I want something with less electrical work. A self-contained piece of hardware would be fine. I'm not really looking to do embedded programming... but that would actually be pretty cool if something was capable of running .net code. I'm looking for something that would be easy to connect, hopefully via USB. Serial ports seems to be more hit or miss nowadays with laptops and netbooks. Something I can easily send data to, like a mini LCD, or series of LED's. Better yet would be something that provides feedback, like a temperature sensor. The best would be something more featured that I could talk to. I would be able to send data to it, and it would send back responses. Maybe something like a servo that could report it's position? Or maybe something that I could set parameters on? Any ideas? Thanks in advance!

    Read the article

  • Linking Listbox child categories

    - by Gerardo Abdo
    Hello I have few monhts working with aspx, and now I'm developing a shopping cart website. For the employee to upload the products on the DB, every product needs to be linked to a category and sub category, and sub-sub category, and so on. Sometimes the sub-sub categories are up to 5. For example Electronics-TV-LCD-Samsung-40 inches. First, What I would like to identify is if the SQL table has the apporpiate structure. I have 3 columns Id, Description, Parent_Id. Categories with Parent Id=0 is used for the top ones. Is this the best way to do it? Then I want to use the ListBox control to select main Categories, and once it is selected, filled a second listbox with its childs and so on. Do I need to query SQL DB everytime the change event happens? I heard about linq but have not used yet, What would be your suggestion to do this. If you have seen a sample to understand it better will be appreciated. Thank you

    Read the article

  • authentication question (security code generation logic)

    - by Stick it to THE MAN
    I have a security number generator device, small enough to go on a key-ring, which has a six digit LCD display and a button. After I have entered my account name and password on an online form, I press the button on the security device and enter the security code number which is displayed. I get a different number every time I press the button and the number generator has a serial number on the back which I had to input during the account set-up procedure. I would like to incorporate similar functionality in my website. As far as I understand, these are the main components: Generate a unique N digit aplha-numeric sequence during registration and assign to user (permanently) Allow user to generate an N (or M?) digit aplha-numeric sequence remotely For now, I dont care about the hardware side, I am only interested in knowing how I may choose a suitable algorithm that will allow the user to generate an N (or M?) long aplha-numeric sequence - presumably, using his unique ID as a seed Identify the user from the number generated in step 2 (which decryption method is the most robust to do this?) I have the following questions: Have I identified all the steps required in such an authentication system?, if not please point out what I have missed and why it is important What are the most robust encryption/decryption algorithms I can use for steps 1 through 3 (preferably using 64bits)?

    Read the article

  • are mobile can be used as a devices to develop application

    - by Richa Media and services
    I say that we can work @ mobile using a technique and work with any IDE and use any OS without problem like work on visual studio and use Window 7 How it possible ? 1. We use Mobile like a CPU and Use a monitor to watch code. We use samsung's techniques to display on monitor. it's give signal to monitor wirelessly to display code on monitor 2 We use Wireless keyboard and Mouse (if user like USB then he also use USB keyboard and mouse) 3. We use a component inside of mobile to control all devices like internet , wi-fi bluethoth. by component user easily setup , control and use feature. 4 don't be confused. i am sure to say that we not use mobile to watch code on mobile screen and Mobile 's keyboard because it's too smaller to work so we use Monitor (LCD) to display code and a keyboard to work comfortably and freely. 5. what are you think if you see a developer who work using this way 6. it is not impossible. give me some feedback and suggestion about your thinking on this technologies.

    Read the article

  • Should I base my Embedded Linux product on Qt?

    - by Udi
    My company is developing a medical product. One of the components is a pda-like platform that will run embedded linux. We were considering Qt as the UI framework but found out that Qt is a lot more than that (we are not familiar with Qt). In general, the device needs to do the following: 1. Receive measurements over USB HID from another device (USB HID is used for convenience). 2. Process the measurements. 3. Store them in a database. 4. Interact with the user using the device's touch screen lcd. 5. Communicate (wi-fi, tcp-ip) with a central management station that collects the data and configures the device. 6. Include a web server to allow accessing the device via a browser. We intend to program in C++. My questions are: 1. Is that a good choice for such a device? 2. Assuming we choose Qt, how do we build our product? - Do we use Qt just as a GUI framework and write the application code in a separate process (passing messages between Qt and the application process)? - Do we write the entire application inside Qt, using all of the services the tool has to offer? - Another approach?

    Read the article

  • Making firefox refresh images faster

    - by Earlz
    I have a thing I'm doing where I need a webpage to stream a series of images from the local client computer. I have a very simple run here: http://jsbin.com/idowi/34 The code is extremely simple setTimeout ( "refreshImage()", 100 ); function refreshImage(){ var date = new Date() var ticks = date.getTime() $('#image').attr('src','http://127.0.0.1:2723/signature?'+ticks.toString()); setTimeout ("refreshImage()", 100 ); } Basically I have a signature pad being used on the client machine. We want for the signature to show up in the web page and for them to see themselves signing it within the web page(the pad does not have an LCD to show it to them right there). So I setup a simple local HTTP server which grabs an image of what the current state of the signature pad looks like and it gets sent to the browser. This has no problems in any browser(tested in IE7, 8, and Chrome) but Firefox where it is extremely laggy and jumpy and doesn't keep with the 10 FPS rate. Does anyone have any ideas on how to fix this? I've tried creating very simple double buffering in javascript but that just made things worse. Also for a bit more information it seems that Firefox is executing the javascript at the correct framerate as on the server the requests are coming in at a constant speed. But the images are only refreshed inconsistently ranging from 5 times per second all the way down to 0 times per second(taking 2 seconds to do a refresh) Also I have tried using different image formats all with the same results. The formats I've tried include bitmaps, PNGs, and GIFs (GIFs caused a minor problem in Chrome with flicker though) Could it be possible that Firefox is somehow caching my images causing a slight lag? I send these headers though: Pragma-directive: no-cache Cache-directive: no-cache Cache-control: no-cache Pragma: no-cache Expires: 0

    Read the article

  • Android - Turn off display without triggering sleep/lock screen - Turn on with Touchscreen

    - by NebulaSleuth
    I have been trying to find a way to turn off the display, and wake up from the user touching the touch screen. The device is in an embedded environment where the device is a tablet and the user does not have access to anything except the touch screen (no buttons at all). It is connected to power so the battery won't be a problem, but when I detect no activity I want to turn off the screen so it isn't staring them in the face all day and doesn't reduce the life the LCD backlight. I maintain a wakelock permanently and decide when to sleep myself. The problem is that when I turn off the screen using : WindowManager.LayoutParams params = getWindow().getAttributes(); params.screenBrightness = 0; getWindow().setAttributes(params); The activity gets paused and stopped. And the unit does not respond to a touch to wake it up. You need to press the power button. At that point the "slide to unlock" shows up. I want to turn off the display, and then stay running so I can detect a touch screen event and turn the display back on. I also tried turning the display to a brightness of 0.1, which works on some devices, but the device I need it to work on, only "dims" the display. I also tried this: // First Remove my FULL wakelock //then aquire a partial wake lock (which should turn off the display) PowerManager.WakeLock wl = manager.newWakeLock(PowerManager.PARTIAL_WAKE_LOCK, "Your Tag"); wl.acquire(); however this method does not turn off the display.

    Read the article

  • Month in Geek: December 2010 Edition

    - by Asian Angel
    As 2010 draws to a close, we have gathered together another great batch of article goodness for your reading enjoyment. Here are our ten hottest articles for December. Note: Articles are listed as #10 through #1. The 50 Best How-To Geek Windows Articles of 2010 Even though we cover plenty of other topics, Windows has always been a primary focus around here, and we’ve got one of the largest collections of Windows-related how-to articles anywhere. Here’s the fifty best Windows articles that we wrote in 2010. Read the article Desktop Fun: Happy New Year Wallpaper Collection [Bonus Edition] As this year draws to a close, it is a time to reflect back on what we have done this year and to look forward to the new one. To help commemorate the event we have put together a bonus size edition of Happy New Year wallpapers for your desktops. Read the article LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology With image technology progressing faster than ever, High-Def has become the standard, giving TV buyers more options at cheaper prices. But what’s different in all these confusing TVs, and what should you know before buying one? Read the article HTG Explains: Which Linux File System Should You Choose? File systems are one of the layers beneath your operating system that you don’t think about—unless you’re faced with the plethora of options in Linux. Here’s how to make an educated decision on which file system to use. Read the article Desktop Fun: Merry Christmas Fonts Christmas will soon be here and there are lots of cards, invitations, gift tags, photos, and more to prepare beforehand. To help you get ready we have gathered together a great collection of fun holiday fonts to help turn those ordinary looking holiday items into extraordinary looking ones. Read the article Microsoft Security Essentials 2.0 Kills Viruses Dead. Download It Now. Microsoft’s Security Essentials has been our favorite anti-malware application for a while—it’s free, unobtrusive, and it doesn’t slow your PC down, but now it’s even better with the new 2.0 release, which adds network filtering, heuristic protection, and more. Read the article 20 OS X Keyboard Shortcuts You Might Not Know Mastering the keyboard will not only increase your navigation speed but it can also help with wrist fatigue. Here are some lesser known OS X shortcuts to help you become a keyboard ninja. Read the article 20 Windows Keyboard Shortcuts You Might Not Know Mastering the keyboard will not only increase your navigation speed but it can also help with wrist fatigue. Here are some lesser known Windows shortcuts to help you become a keyboard ninja. Read the article The 50 Best Registry Hacks that Make Windows Better We’re big fans of hacking the Windows Registry around here, and we’ve got one of the biggest collections of registry hacks you’ll find. Don’t believe us? Here’s a list of the top 50 registry hacks that we’ve covered. Read the article The Complete List of iPad Tips, Tricks, and Tutorials The Apple iPad is an amazing tablet, and to help you get the most out of it, we’ve put together a comprehensive list of every tip, trick, and tutorial for you. Read on for more. Read the article Latest Features How-To Geek ETC The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Tune Pop Enhances Android Music Notifications Another Busy Night in Gotham City Wallpaper Classic Super Mario Brothers Theme for Chrome and Iron Experimental Firefox Builds Put Tabs on the Title Bar (Available for Download) Android Trojan Found in the Wild Chaos, Panic, and Disorder Wallpaper

    Read the article

  • Change Desktop Resolution With a Keyboard Shortcut

    - by Matthew Guay
    Do you find yourself changing your monitor resolution several times a day?  If so, you might like this handy way to set a keyboard shortcut for your most-used resolutions. Most users rarely have to change their screen resolution often, as LCD monitors usually only look best at their native resolution.  But netbooks present a unique situation, as their native resolution is usually only 1024×600.  Some newer netbooks offer higher resolutions which may not looks as crisp as the native resolution but can be handy for using a program that expects a higher resolution.  This is the perfect situation for a keyboard shortcut to help you change the resolution without having to hassle with dialogs and menus each time, and HRC – HotKey Resolution Changer makes it easy to do. Create Keyboard Shortcuts Download the HRC – HotKey Resolution Changer (link below), unzip, and then run HRC.exe in the folder. This will start a tray icon, and will not automatically open the HRC window.  You don’t have to install HRC.  Double-click the tray icon to open it.  Note: Windows 7 automatically hides new tray icons, so if you can’t see it, click the arrow to see the hidden tray icons. By default, HRC will show two entries with your default resolutions, color depth, and refresh rate. Add a keyboard shortcut by clicking the Change button over the resolution.  Press the keyboard shortcut you want to press to switch to that resolution; we entered Ctrl+Alt+1 for our default resolution.  Make sure not to use a keyboard shortcut you use in another application, as this will override it.  Click Set when you’ve entered the hotkey(s) you want. Now, on the second entry, select the resolution you want for your alternate resolution.  The drop-down list will only show your monitor’s supported resolutions, so you don’t have to worry about choosing an incorrect resolution.  You can also set a different color depth or refresh rate for this resolution.  Now add a keyboard shortcut for this resolution as well. You can set keyboard shortcuts for up to 9 different resolutions with HRC.  Click the Select number of HotKeys button on the left, and choose the number of resolutions you want to set.  Here we have unique keyboard shortcuts for our three most-used resolutions on our netbook. HRC must be kept running to use the keyboard shortcuts, so click the Minimize to tray icon which is the second icon to the right.  This will keep it running in the tray. If you want to be able to change your resolution anytime, you’ll want HRC to automatically start with Windows.  Create a shortcut to HRC, and paste it into your Windows startup folder.  You can easily open this folder by entering the following in the Run command or in the address bar in Explorer: %appdata%\Microsoft\Windows\Start Menu\Programs\Startup   Conclusion HRC- HotKey Resolution Changer gives you a great way to quickly change your screen resolution with a keyboard shortcut.  Whether or not you love keyboard shortcuts, this is still a much easier way to switch between your most commonly used resolutions. Download HRC – HotKey Resolution Changer Similar Articles Productive Geek Tips Create a Keyboard Shortcut to Access Hidden Desktop Icons and FilesGet Mac’s Hide Others (cmd+opt+H) Keyboard Shortcut for WindowsHide Desktop Icon Text on Windows 7 or VistaShow Keyboard Shortcut Access Keys in Windows VistaKeyboard Ninja: 21 Keyboard Shortcut Articles TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative

    Read the article

< Previous Page | 18 19 20 21 22 23 24  | Next Page >