Search Results

Search found 22390 results on 896 pages for 'software demo'.

Page 22/896 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

  • Linux Software RAID1 Rebuild Completes, but after reboot, its degraded again

    - by zimmy6996
    I have been beating my head with an issue here, and I'm now turning to the internet for help. I have a system running Mandrake Linux, with the following configuration: /dev/hda - This is a IDE drive. Has some partitions on it that boot the system and make up most of the file system. /dev/sda - This is drive 1 of 2 for a software raid /dev/md0 /dev/sdb - This is drive 2 of 2 for a software raid /dev/md0 md0 gets mounted but fstab as /data-storage, so it is not critical to the systems ability to boot. We can comment it out of fstab, and the system works just fine either way. The problem is, we have a failed sdb drive. So I shut the box down, and have pulled the failed disk and installed a new disk. When the system boots up, /proc/mdstat shows only sda as part of the raid. I then run the various command to rebuild the RAID to /dev/sdb. Everything rebuilds correctly, and upon completion, you look at /proc/mdstat and it shows 2 drives sda1(0) and sdb1(1). Everything looks great. Then you reboot the box ... UGH!!! Once rebooted, sdb is missing again from the RAID. It is like the rebuild never happened. I can walk through the commands to rebuild it again, and it will work, but again, after reboot, the box seems to make sdb just vanish! The real odd thing is, if after reboot, I pull sda out of the box, and try to get the system to load with the rebuilt sdb drive in the system, and when I do, the system actually throws and error just after grub, and says something about drive error, and the system has to shut down. Thoughts??? I'm starting to wonder if grub has something to do with this mess. That the drive isn't being setup within grub to be visible at boot? This RAID array isn't necessary for the system to boot, but when the replacement drive is in there, without SDA it won't boot system, so it makes me believe there is something to that. On top of that, there just seems to be something wonky here the drive falling off of RAID after reboot. I've hit the point of pounding my head on the keyboard. Any help would be greatly appreciated!!!

    Read the article

  • Apple IIe Software Disks

    - by Mike Grace
    I just got a working Apple IIe but I don't have any system or software disks. I did some searches on Google to look for sources for disks but haven't been able to find many resources that I could actually buy disks from. What are some good places to purchase disks for my Apple IIe? Are there some good groups on the web where others are using and restoring Apple IIes?

    Read the article

  • "Must-Have" Open Source software?

    - by marco.ragogna
    When I am searching for a program to use at home I will consider at first all open source programs because I like the philosophy, the approach and the communities behind these projects. What are, in your opinion, the must-have Open Source software that should be installed on every Home PC? One program per answer please.

    Read the article

  • Easy to use booking software?

    - by drozzy
    Looking for an easy to use B&B booking software that will allow the owner to schedule and rent rooms. It would ideally have a windows client (with cloud sync) and thinking mobile app for reminders and such. Calendar with automatic scheduling of some sort would be great too. Anyone heard of something along these lines? If not - any suggestions of API's or services that one could start with to roll their own solution?

    Read the article

  • Should I install Firefox add-ons via the Software Center or the webbrowser?

    - by Agmenor
    I would like to install some Firefox add-ons, also called 'extensions' or 'plugins', like for example Adblock Plus, Ubufox or Greasemonkey. Should I install them from the Mozilla website, using the Firefox browser, or should I search Firefox in the Software Center and then select the interesting applications ? I suppose the issue is about how the extensions are kept up-to-date. If your answer is 'via the Software Center', how can I migrate well from my former add-ons without losing all my preferences?

    Read the article

  • Why don't we have an "unofficial" software center with all the PPAs?

    - by balki
    Many questions are answered simply with add this repository and install. I understand that Ubuntu developers cannot quickly verify all packages and make them available in official repositories. But is there an unofficial main repository or software center where developers can register their PPAs? Adding individual repositories is a pain and the update also takes longer as it has to check all the PPAs. Like we have alternative markets for android, it would be great if there are any popular alternative software sources that we can reasonably trust.

    Read the article

  • IoT end-to-end demo – Remote Monitoring and Service By Harish Doddala

    - by JuergenKress
    Historically, data was generated from predictable sources, stored in storage systems and accessed for further processing. This data was correlated, filtered and analyzed to derive insights and/or drive well constructed processes. There was little ambiguity in the kinds of data, the sources it would originate from and the routes that it would follow. Internet of Things (IoT) creates many opportunities to extract value from data that result in significant improvements across industries such as Automotive, Industrial Manufacturing, Smart Utilities, Oil and Gas, High Tech and Professional Services, etc. This demo showcases how the health of remotely deployed machinery can be monitored to illustrate how data coming from devices can be analyzed in real-time, integrated with back-end systems and visualized to initiate action as may be necessary. Use-case: Remote Service and Maintenance Critical machinery once deployed on the field, is expected to work with minimal failures, while delivering high performance and reliability. In typical remote monitoring and industrial automation scenarios, although many physical objects from machinery to equipment may already be “smart and connected,” they are typically operated in a standalone fashion and not integrated into existing business processes. IoT adds an interesting dynamic to remote monitoring in industrial automation solutions in that it allows equipment to be monitored, upgraded, maintained and serviced in ways not possible before. Read the complete article here. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Technorati Tags: IoT,Iot demo,sales,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

    Read the article

  • Installing all the bits to demo Entity Framework 4 on the Visual Studio 2010 Release Candidate

    - by Eric Nelson
    Next week (17th March 2010) I am presenting on EF4 at www.devweek.com in London (and Azure on the 18th). Today I wanted to get all the latest bits on my demo machine and also check if there are any cool new resources I can point people at. Whilst most of the new improvements in Entity Framework come with the Visual Studio 2010 RC (and the RTM), there are a couple of separate items you need to install if you want to explore all the features. To demo EF4 you need: Visual Studio 2010 RC Download and install the Visual Studio 2010 Release Candidate. In my case I went from the Ultimate Edition but it will work fine on Premium and Professional. POCO Templates See the team blog post for a detailed explanation. Use the Extension Manager inside Visual Studio 2010: And install the updated POCO templates for either C# or VB (or both if you are so inclined!): Code First Next you will also need to install Code First (formally called Code Only). This is part of the Entity Framework Feature CTP 3. See the team blog post for a detailed explanation. Download the CTP from Microsoft downloads and run the setup. This will give you a new dll for Code First Optionally (but I recommend it) install LINQPad for the RC Download LINQPad Beta for .NET 4.0 Related Links 101 EF4 Resources

    Read the article

  • Check Out Eye Tracking, Mobile, and Fusion Apps at Apps UX Demo Pods

    - by Oracle OpenWorld Blog Team
    By Kathy Miedema, Oracle Applications User Experience Among the many cool things to see at the Oracle OpenWorld DEMOgrounds this year will be demo pods featuring some of the cutting-edge tools in Oracle’s arsenal of usability evaluation methods.OK, so we’re bragging a little. But past conference goers agree – these demos consistently hit the Top 10 for number of visits. Why? Because you get to try out our eye-tracking tool, which follows where a user looks on a screen and helps the UX team decipher issues with navigation design. Or you can see our facial gesture analysis tool in action, which helps us read the emotions you might be experiencing as you look at a screen – happy, sad, or dismayed, to name a few. Are you interested in Oracle’s strategy for user experience? Come to the Apps UX pods for a look at enterprise applications on mobile devices including smart phones and the iPad. Stay for a demo of self-service or CRM tasks in the Fusion Applications welcome experience. The DEMOgrounds for Oracle Applications are located on the lower level of Moscone West. Hours for the Exhibition Hall are Monday, October 1: 9:30 a.m. to 6:00 p.m. Tuesday, October 2: 9:45 a.m. to 6:00 p.m. Wednesday, October 3: 9:45 a.m. to 4:00 p.m.  Not yet registered for Oracle OpenWorld? Register now!

    Read the article

  • Sun Ray Hardware Last Order Dates & Extension of Premier Support for Desktop Virtualization Software

    - by Adam Hawley
    In light of the recent announcement  to end new feature development for Oracle Virtual Desktop Infrastructure Software (VDI), Oracle Sun Ray Software (SRS), Oracle Virtual Desktop Client (OVDC) Software, and Oracle Sun Ray Client hardware (3, 3i, and 3 Plus), there have been questions and concerns regarding what this means in terms of customers with new or existing deployments.  The following updates clarify some of these commonly asked questions. Extension of Premier Support for Software Though there will be no new feature additions to these products, customers will have access to maintenance update releases for Oracle Virtual Desktop Infrastructure and Sun Ray Software, including Oracle Virtual Desktop Client and Sun Ray Operating Software (SROS) until Premier Support Ends.  To ensure that customer investments for these products are protected, Oracle  Premier Support for these products has been extended by 3 years to following dates: Sun Ray Software - November 2017 Oracle Virtual Desktop Infrastructure - March 2017 Note that OVDC support is also extended to the above dates since OVDC is licensed by default as part the SRS and VDI products.   As a reminder, this only affects the products listed above.  Oracle Secure Global Desktop and Oracle VM VirtualBox will continue to be enhanced with new features from time-to-time and, as a result, they are not affected by the changes detailed in this message. The extension of support means that customers under a support contract will still be able to file service requests through Oracle Support, and Oracle will continue to provide the utmost level of support to our customers as expected,  until the published Premier Support end date.  Following the end of Premier Support, Sustaining Support remains an 'indefinite' period of time.   Sun Ray 3 Series Clients - Last Order Dates For Sun Ray Client hardware, customers can continue to purchase Sun Ray Client devices until the following last order dates: Product Marketing Part Number Last Order Date Last Ship Date Sun Ray 3 Plus TC3-P0Z-00, TC3-PTZ-00 (TAA) September 13, 2013 February 28, 2014 Sun Ray 3 Client TC3-00Z-00 February 28, 2014 August 31, 2014 Sun Ray 3i Client TC3-I0Z-00 February 28, 2014 August 31, 2014 Payflex Smart Cards X1403A-N, X1404A-N February 28, 2014 August 31, 2014 Note the difference in the Last Order Date for the Sun Ray 3 Plus (September 13, 2013) compared to the other products that have a Last Order Date of February 28, 2014. The rapidly approaching date for Sun Ray 3 Plus is due to a supplier phasing-out production of a key component of the 3 Plus.   Given September 13 is unfortunately quite soon, we strongly encourage you to place your last time buy as soon as possible to maximize Oracle's ability fulfill your order. Keep in mind you can schedule shipments to be delivered as late as the end of February 2014, but the last day to order is September 13, 2013. Customers wishing to purchase other models - Sun Ray 3 Clients and/or Sun Ray 3i Clients - have additional time (until February 28, 2014) to assess their needs and to allow fulfillment of last time orders.  Please note that availability of supply cannot be absolutely guaranteed up to the last order dates and we strongly recommend placing last time buys as early as possible.  Warranty replacements for Sun Ray Client hardware for customers covered by Oracle Hardware Systems Support contracts will be available beyond last order dates, per Oracle's policy found on Oracle.com here.  Per that policy, Oracle intends to provide replacement hardware for up to 5 years beyond the last ship date, but hardware may not be available beyond the 5 year period after the last ship date for reasons beyond Oracle's control. In any case, by design, Sun Ray Clients have an extremely long lifespan  and mean time between failures (MTBF) - much longer than PCs, and over the years we have continued to see first- and second generations of Sun Rays still in daily use.  This is no different for the Sun Ray 3, 3i, and 3 Plus.   Because of this, and in addition to Oracle's continued support for SRS, VDI, and SROS, Sun Ray and Oracle VDI deployments can continue to expand and exist as a viable solution for some time in the future. Continued Availability of Product Licenses and Support Oracle will continue to offer all existing software licenses, and software and hardware support including: Product licenses and Premier Support for Sun Ray Software and Oracle Virtual Desktop Infrastructure Premier Support for Operating Systems (for Sun Ray Operating Software maintenance upgrades/support)  Premier Support for Systems (for Sun Ray Operating Software maintenance upgrades/support and hardware warranty) Support renewals For More Information For more information, please refer to the following documents for specific dates and policies associated with the support of these products: Document 1478170.1 - Oracle Desktop Virtualization Software and Hardware Lifetime Support Schedule Document 1450710.1 - Sun Ray Client Hardware Lifetime schedule Document 1568808.1 - Document Support Policies for Discontinued Oracle Virtual Desktop Infrastructure, Sun Ray Software and Hardware and Oracle Virtual Desktop Client Development For Sales Orders and Questions Please contact your Oracle Sales Representative or Saurabh Vijay ([email protected])

    Read the article

  • SharePoint Saturday DC 2010 Slides, Demo Scripts, and Pictures

    - by Brian Jackett
    Wow! This past weekend I attended SharePoint Saturday Washington DC (SPSDC) which was quite an event to say the least.  For those unfamiliar, SharePoint Saturday is a community driven event where various speakers gather to present at a FREE conference on all topics related to SharePoint.  This made my fifth SharePoint Saturday attended and fourth I’ve spoken at.  SPSDC was a bit different than most SharePoint Saturdays mostly due to the scale of it.  We had almost 950 attendees, over 80 speakers presenting close to 90 sessions, and dozens of sponsors.  A big thanks goes out to the organizers of this event.  They put in a lot of hard work and time to pull this event off and should be very proud of the end result.      For SPSDC I presented “The Power of PowerShell + SharePoint 2007”.  I want to thank all of the attendees of my session for coming and asking some great questions.  Below you can find the slides and demo scripts for this session.  I also took some photos throughout the day (not as many as usual since so much going on) so check them out.  If you have any follow up questions feel free to drop me a line in the comments or the contact link at the top of the site.   Slides and Scripts Click here for the demo scripts and slides posted on my SkyDrive. VERY IMPORTANT NOTE: One thing I forgot to mention in my presentation.  In order to run code against the SharePoint API you need to load the Microsoft.SharePoint.dll assembly first.  Run the below command on the PowerShell console line to complete that:   [void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint") Photos Facebook album -or- My album on Windows Live site (higher res shots). View Full Album         -Frog Out

    Read the article

  • Which specific practices could be called "software craftsmanship" rather than "software engineering"?

    - by FinnNk
    Although not a new idea there seems to have been a big increase in the interest in software craftsmanship over the last couple of years (notably the often recommended book Clean Code's full title is Clean Code: A Handbook of Agile Software Craftsmanship). Personally I see software craftsmanship as good software engineering with an added interest in ensuring that the end result is a joy to work with (both as an end user and as someone maintaining that software) - and also that its focus is more at the coding level of things than the higher level process things. To draw an analogy - there were lots of buildings constructed in the 50s and 60s in a very modern style which took very little account of the people who would be living in them or how those buildings would age over time. Many of those buildings rapidly developed into slums or have been demolished long before their expected lifespans. I'm sure most developers with a few years under their belts will have experienced similar codebases. What are the specific things that a software craftsman might do that a software engineer (possibly a bad one) might not?

    Read the article

  • Skynet Big Data Demo Using Hexbug Spider Robot, Raspberry Pi, and Java SE Embedded (Part 3)

    - by hinkmond
    In Part 2, I described what connections you need to make for this demo using a Hexbug Spider Robot, a Raspberry Pi, and Java SE Embedded for programming. Here are some photos of me doing the soldering. Software engineers should not be afraid of a little soldering work. It's all good. See: Skynet Big Data Demo (Part 2) One thing to watch out for when you open the remote is that there may be some glue covering the contact points. Make sure to use an Exacto knife or small screwdriver to scrape away any glue or non-conductive material covering each place where you need to solder. And after you are done with your soldering and you gave the solder enough time to cool, make sure all your connections are marked so that you know which wire goes where. Give each wire a very light tug to make sure it is soldered correctly and is making good contact. There are lots of videos on the Web to help you if this is your first time soldering. Check out Laday Ada's (from adafruit.com) links on how to solder if you need some additional help: http://www.ladyada.net/learn/soldering/thm.html If everything looks good, zip everything back up and meet back here for how to connect these wires to your Raspberry Pi. That will be it for the hardware part of this project. See, that wasn't so bad. Hinkmond

    Read the article

  • How to route my internet from mobile broadband from a third party software to network manager

    - by user86865
    I use mobile broadband connection (Reliance Netconnect+ USB) for internet. I can connect to this network from Network Manager easily. There is a 3rd party software which is given by the service provider. I can also connect to the internet by using this software (Software from ZTE). But when i am using this software, i cannot upload files to Ubuntu One, Cannot install packages from Software Center, etc except i can load web pages from FireFox. But when using the connection from NM, i can do all the stuffs. But, there are so many options available in this 3rd party software. So, can i route my internet connection from this software to my Network Manager? There are some options available in the settings as;- Dns, alternate dns, static IP, CHAP, PAP. Can anyone help me?? I use 12.04.

    Read the article

  • Most important research article for software development [closed]

    - by Fabian Fagerholm
    Researchers all over the world collectively publish thousands of articles on software development topics every year, hoping to benefit practical software development in the long run. (Of course, some of them only publish to increase their publication count, but hopefully most still aim to advance the field.) But what is really useful for practical software development? Of all the research articles you have read, what do you consider being the most important one for the software development field? What is it about that article that makes it stand out as especially important in your view? Note: I deliberately chose the term "software development", but you can freely interpret it as "programming" or "software engineering", or anything else that fits into the "software development" category.

    Read the article

  • Linux software RAID6: rebuild slow

    - by Ole Tange
    I am trying to find the bottleneck in the rebuilding of a software raid6. ## Pause rebuilding when measuring raw I/O performance # echo 1 > /proc/sys/dev/raid/speed_limit_min # echo 1 > /proc/sys/dev/raid/speed_limit_max ## Drop caches so that does not interfere with measuring # sync ; echo 3 | tee /proc/sys/vm/drop_caches >/dev/null # time parallel -j0 "dd if=/dev/{} bs=256k count=4000 | cat >/dev/null" ::: sdbd sdbc sdbf sdbm sdbl sdbk sdbe sdbj sdbh sdbg 4000+0 records in 4000+0 records out 1048576000 bytes (1.0 GB) copied, 7.30336 s, 144 MB/s [... similar for each disk ...] # time parallel -j0 "dd if=/dev/{} skip=15000000 bs=256k count=4000 | cat >/dev/null" ::: sdbd sdbc sdbf sdbm sdbl sdbk sdbe sdbj sdbh sdbg 4000+0 records in 4000+0 records out 1048576000 bytes (1.0 GB) copied, 12.7991 s, 81.9 MB/s [... similar for each disk ...] So we can read sequentially at 140 MB/s in the outer tracks and 82 MB/s in the inner tracks on all the drives simultaneously. Sequential write performance is similar. This would lead me to expect a rebuild speed of 82 MB/s or more. # echo 800000 > /proc/sys/dev/raid/speed_limit_min # echo 800000 > /proc/sys/dev/raid/speed_limit_max # cat /proc/mdstat md2 : active raid6 sdbd[10](S) sdbc[9] sdbf[0] sdbm[8] sdbl[7] sdbk[6] sdbe[11] sdbj[4] sdbi[3](F) sdbh[2] sdbg[1] 27349121408 blocks super 1.2 level 6, 128k chunk, algorithm 2 [9/8] [UUU_UUUUU] [=========>...........] recovery = 47.3% (1849905884/3907017344) finish=855.9min speed=40054K/sec But we only get 40 MB/s. And often this drops to 30 MB/s. # iostat -dkx 1 sdbc 0.00 8023.00 0.00 329.00 0.00 33408.00 203.09 0.70 2.12 1.06 34.80 sdbd 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdbe 13.00 0.00 8334.00 0.00 33388.00 0.00 8.01 0.65 0.08 0.06 47.20 sdbf 0.00 0.00 8348.00 0.00 33388.00 0.00 8.00 0.58 0.07 0.06 48.00 sdbg 16.00 0.00 8331.00 0.00 33388.00 0.00 8.02 0.71 0.09 0.06 48.80 sdbh 961.00 0.00 8314.00 0.00 37100.00 0.00 8.92 0.93 0.11 0.07 54.80 sdbj 70.00 0.00 8276.00 0.00 33384.00 0.00 8.07 0.78 0.10 0.06 48.40 sdbk 124.00 0.00 8221.00 0.00 33380.00 0.00 8.12 0.88 0.11 0.06 47.20 sdbl 83.00 0.00 8262.00 0.00 33380.00 0.00 8.08 0.96 0.12 0.06 47.60 sdbm 0.00 0.00 8344.00 0.00 33376.00 0.00 8.00 0.56 0.07 0.06 47.60 iostat says the disks are not 100% busy (but only 40-50%). This fits with the hypothesis that the max is around 80 MB/s. Since this is software raid the limiting factor could be CPU. top says: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 38520 root 20 0 0 0 0 R 64 0.0 2947:50 md2_raid6 6117 root 20 0 0 0 0 D 53 0.0 473:25.96 md2_resync So md2_raid6 and md2_resync are clearly busy taking up 64% and 53% of a CPU respectively, but not near 100%. The chunk size (128k) of the RAID was chosen after measuring which chunksize gave the least CPU penalty. If this speed is normal: What is the limiting factor? Can I measure that? If this speed is not normal: How can I find the limiting factor? Can I change that?

    Read the article

  • software package disappeared in GPO after access rights change

    - by sirka
    Hi, in GPO, this item Computer > Software settings > Assigned applications > IE8_package was on Security tab set "Authenticated users" to "Deny". After that it disappeared from GPO, it is there, but nowhere shown. The intention was to disable installation of that package for now, yet having other packages in that GPO still installed. I know it was stupid decision now. Is there any way to display that package back? Please help.

    Read the article

  • OS X Money Management Software

    - by Ryan O
    I recently moved from Windows to a Mac, but I still have to keep Virtualbox and Windows installation on the machine to use Quicken. iBank looked promising, but I had problems importing my data from Quicken. I would switch to Mint if they would allow you to enter transactions manually, but the lack of that feature is a deal breaker. (I use Quicken primarily to track uncleared transactions, with the bonus of reporting on past spending.) Is there any other software I should try that will be able to import at least most of my old data from Quicken? Edit: For what it's worth, I never did find anything else. Quicken Essentials for Mac was released this year, but doesn't handle investments well from what I hear. I'm now on Quicken 2010 under XP running inside Virtualbox. It's not ideal, but it seems to be the only thing around right now that meets my needs.

    Read the article

  • Looking for a software to keep track of backup media

    - by Tarnschaf
    Hi, I am looking for a software that allows me to enter my used backup media (e.g. DVD1, DVD2) my backed-up assets in high-level (such as "family-photos from 2003", "laptop drivers") details of the assets ("Ninas Birthday 2003") where the backup media is currently stored when the media has been burned (to re-burn in case of media degeneration) Of course it should be possible to navigate from media to assets and backwards. I also thought about marking assets as "deprecated". If all assets on a media are deprecated, the program should tell me so I don't have to keep it any more. Does anybody know a program with this feature-set or will I have to start my own in say Access?

    Read the article

  • What is the best software for desktop recording?

    - by Ivo Flipse
    I know this question is partially a stub from: http://superuser.com/questions/201/free-desktop-recording-screencasting-on-windows However I would have to use this at work, so it doesn't have to be free, just work very well. Lended from the free post: I would expect such an application to have these features: choose the whole desktop, a region, a window to record zoom in an area, and camera move save the recorded movie to a compressed format have basic editing tools have the mouse highlighting feature highlight window/field on the screen, any trick will do display pressed keys/key combinations (like iphone does) So the question is: Which desktop recording/screencasting software would you recommend?

    Read the article

  • Linux software RAID 10 implementation

    - by fabrik
    Hello there! I don't want to force anybody to make it on behalf of me but trust me: i've looked hundreds of sites and i can't find a good starting point for this. I have 4x500Gb HDD's which i want to set up in RAID 10. The most promising description is here, but it's a little old and unclear for me, above all i prefer Debian over Ubuntu (i know there are slight or no differences). Is it possible to build RAID 10 with Debian's installer or i need to build RAID 1 first in the installer then use mdadm later? What is the best practice for building software RAID 10 under Linux (Debian)? Thanks for your time, fabrik

    Read the article

  • How to recover data from software RAID 5 disk partition

    - by Ali n
    I have CentOS 5.8 on my computer, with 5x 1TB hard drives. I used software RAID. (RAID 1 as a boot partition md0, RAID 0 as a root partition md1 and RAID 5 as /home partition md3). Unfortunately one of these hard drives failed lately and I want to replace it with a new one. I want to know that is it possible to change this hard drive without data loss? The important partition is RAID 5 so in theory if one of hard drives failed I should be able to recover its data without any problem. But in practice how can I do that?

    Read the article

  • Internet addicted, need software to control my usage and block access

    - by user69991
    I found I have problem to be a little addictive with surfing on internet. I am trying to find a free ware, (or software), that can help me for exemple to be just 2 hours per day on internet. Like it is counting the minutes and than stop working. not just 2 hours in one time, but in whole day.... maybe that it has different modes (2hours together, in whole day, 2hours + little reserve time) but I need something that really take me away access from internet :) Just counting time, is not enough for me :) Hope we will find something because, I just can't avoid not to loose 4 hours on internet. I have windows 7

    Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >