Search Results

Search found 1050 results on 42 pages for 'vga'.

Page 22/42 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

  • No signal to monitor after driver install

    - by Hossam Riyad
    After installing 10.10 I used Hardware Drivers (Jockey) to install the graphics driver v11.2 for my ATI HD 5770. After restarting to activate the driver all went well and the boot screen showed up but not like the normal one the text was rough on the edges and after the boot finished the screen turned black and no signal. I have found some forum discussions about that issue but no fix worked for me. I use a DVI to VGA adapter and I have a View Sonic E70F CRT monitor. PC specs CPU: Intel Q8300 2.5/4 GPU: ATI Powercolor HD5770 1GB MB: Gigabyte EP43-UD3L RAM: 4GB 1066 Kingston

    Read the article

  • Black screen while booting, after installing installing AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver on HP pavilion dm4

    - by Megharaj
    HP Pavilion dm4 with configuration as shown below cpu intel Core i5 2.26 GHz RAM 4.0 GB Graphics processor 512MB ATI Mobility Radeon(TM) HD 5450 switchable graphics [HDMI, VGA]. I installed ubuntu 10.04 ( without AMD graphics driver) it was working fine, but when I installed AMD graphics drivers AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver, than the problem started from then When I boot I was get black screen. Than I thought to upgrade from ubuntu 10.04 to 12.04 using the bootable pen drive but was getting black screen than read on some forums that was because of the switchable graphics, than upgraded ubuntu 12.04 by setting to "nomodeset". It was working, again thought to install graphics driver AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver, again after installing this, when I boot I am getting blank scree . Can anyone help me to inatall ubuntu 12.04 along with AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver. Any help is highly appreciated.

    Read the article

  • Nvidia G96 [GeForce 9400 GT] and application graphic issues

    - by Fabio
    I've got a quite old NVIDIA graphic card and I with installed restricted drivers from Settings panel (as also shown in this thread). ? ~ lspci 02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9400 GT] (rev a1) I tried a lot of them: version 173-update, current, beta, but the only one that can run unity-2d it's current-update. That's Ubuntu 12.04.1 LTS 64bit. However... Unity crashes, sometimes windows border disappear, Java Virtual Machine doesn't works, font rendering it's slow and so on. How can I solve this? Some suggestions? Thanks!

    Read the article

  • Graphics on boot split into three sections

    - by a sandwhich
    I just installed 13.04 onto a new laptop because of the ease of install with the uefi bios. When I boot the system though, the screen is split into three sections each about 640x200 at the top of the screen, with the active terminal mirrored across them. Although I can login, startx fails due to something about a file. I have tried booting with vga=711 and normal nomodeset with no success. Booting the live usb I originally installed from results in the same issue. The graphics driver in the xorg.conf.something from what I can make out is set to vesa, but it could be set to some other four character value that is similar to vesa, hard to tell. How can I fix this? One thing to note, the laptop has two dedicated GT 750m's, along with the intel 4000 built into the processor. This is what it looks like, the purple box is what the grub2 menu was in before boot.

    Read the article

  • Cannot control the fan on a Sony Vaio laptop

    - by Xobb
    I've got Sony Vaio laptop and my fan is on all the time, though the temperature on the video-adapter is always over 60°?. As I've googled, vaiofand does not support VPC-EA series. Is there anything I can do with that or I need another laptop? I'm using the following graphics card: 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] though the problem is not with the graphics card. I've mentioned its temperature as the highest (64°C now btw). Seems like the notebook is always overheated and I cannot control the fan speed to make it cooler. And yes, I'm using the proprietary driver ATI/AMD FGLRX graphics driver. I'm using Kubuntu 11.04.

    Read the article

  • A good interpreted language for a small embedded project

    - by Earlz
    I have an mbed which has a small ARM Cortex M3 on it. Basically, my effective resources for the project are ~25Kb of RAM and ~400Kb of Flash. For I/O I'll have a PS/2 keyboard, a VGA framebuffer(with character output), and an SD card for saving/loading programs(up to a couple of Mb maybe) The reason I ask this here is because I'm trying to figure out what programming language to implement on the thing. I'm looking for an interpreted language that's easy for me to implement, and won't break the bank on my resources. I also intend for this to be at least possible to write on th device itself, though the editor can be interpreted(yay bootstrapping) Anyway, I've looked at a few simple languages. Some nice candidates: Forth BASIC Scheme? Has anyone done something like this or know of any languages that can fit this bill or have comments about my three candidates so far?

    Read the article

  • Using External Monitor with Laptop Monitor as separate monitors

    - by user14623
    I am trying to use 32"LCD monitor with my ubuntu 10.10 installation. I am trying to use my laptop screen and external monitor at the same time but having two separate desktops. I also want to use my laptop with 1280x800 resolution and external one with 1920 x 1080 using VGA. However, ubuntu sees my external LCD as a CRT and provide 13....x... resolution at the best not above. My graphics card driver is Nvidia 270.... driver. Is ubuntu capable of using two monitors separately or should i give up? Thank you

    Read the article

  • Nvidia problems. I think.

    - by Nate D.
    Let me start off by saying, I've been trying to run Ubuntu on my custom PC for about 2 years. From 10.04 to 12.04, this problem persists. When I try to boot Ubuntu from either a USB stick or a CD, I see the normal Ubuntu splash screen. It looks like it's working, orange dots are moving, but then the screen glitches and freezes. I'm assuming this happens because there are no drivers for my graphics card (Nvidia GeForce 8800, I think). My motherboard has no onboard graphics, nor does it have a VGA out. So, how can I get this working on my system? Can I somehow put the drivers along side the .img on the USB stick? I can boot from my Ubuntu USB stick on my MacBook. In case that helps anyone...

    Read the article

  • Intel HD graphics on Ubuntu

    - by tiax
    My girlfriend got a new Subnotebook for Christmas (Sony Vayo VPCY21S1E), which comes with an "Intel HD graphics" vga adaptor. When I try to boot the Ubuntu installer from USB, the screen goes blank after a short while, before I even see the Ubuntu logo. However, when I select "nomodeset" in the boot options, I can boot it to the CLI login prompt. When I start X, though, that only works in VESA mode (I've read Intel eventually got rid of Usermode Mode Setting and only offers KMS now, which I've disabled to get it to boot). What can I do to enable a) higher resolution than 1024x768 in VESA b) hardware acceleration for compiz, video playback, etc?

    Read the article

  • Screen is very dim on an Acer Aspire 6920Z

    - by Justin
    I've been trying to figure this out for a week now, my laptops screen is on and working but you cannot see whats on the screen without shining a flashlight at it. I'm using a spare monitor by the VGA port right now to be able to use this laptop, which is kinda a pain. Been reading around a bit about this problem and it seems to be a common-ish problem it seems. I've tried to change the brightness which doesn't help whats so ever. It just happen one day after I turned off the laptop for the night. The screen flashes on for a bit at start up, then goes completely dim. Anyone with this problem and find a fix? You can search up this computers spec by the name/model in the title if you need hardware info. I never had this problem with the old Ubuntu 10.04.

    Read the article

  • Monitor resolution messed up, monitor is unknown.

    - by Kaustubh P
    Is there anyway to reset my monitor? My moitor is using the xorg.conf file. I use 10.04, without any Graphics Card. My monitor is an Acer X193W, with a native resolution of 1440x900. This is my xorg.conf file: Section "Screen" Identifier "Configured Screen Device" Device "Configured Video Device" Monitor "Test" DefaultDepth 16 SubSection "Display" Depth 16 Modes "1440x900_60.00" EndSubSection EndSection #Section "Device" # Identifier "Configured Video Device" # HorizSync # VertRefresh #EndSection I still cant view the native resolution, even when defined in the xorg file. An way I can revert to the default, or delete some files, to make the system detect the monitor again? My last resort is the cvt method, and adding it to the xrandr file. EDIT: I use Intel Drivers. My /proc/fb contains 0 VGA16 VGA

    Read the article

  • How do I turn on wireless adapter on HP Envy dv6 7200 under Ubuntu (any version)?

    - by Dave B.
    I have a new HP Envy dv6 7200 with dual boot Windows 8 / Ubuntu 12.04. In windows, the F12 key in Windows activates the "airplane mode" switch which enables/disables both on-board (mini PCIe) and USB wireless adapters. In Ubuntu, however, the wireless adapter is turned off by default and cannot be turned back on via the F12 key (or any other combination of F12 and Ctrl, Fn, Shift, etc.). Let me explain the "fixes" I've seen in various forums and explain what did or did not happen. These are listed in no particular order. (Spoiler alert: wireless is still broke). Solution 1? Use HP's "Wireless Assistant" utility to permanently activate the wireless card in Windows, then boot into Ubuntu to happily find it working. Unfortunately, this utility works in Windows 7 but not Windows 8. On the other hand, hardware drivers from HP are only available for Windows 8 for this model. Catch 22 (I could not find a comparable utility for Windows 8). Solution 2? Use a USB wireless adapter to sidestep the on-board device. I purchased such a device from thinkpenguin.com to be sure that it would be Linux-friendly. However, the wireless switch enables / disables all wireless devices including USB. So, there's my $50 donation to the nice folks at thinkpenguin.com, but still no solution. Solution 3? Following the Think Penguin folk's suggestion, modify the mini PCI express adapter following instructions here: http://www.notebookforums.com/t/225429/broken-wireless-hardware-switch-fix Tempting, but I then violate the terms of my warranty mere days after opening the box. This might be a good solution for an older machine that you want to get your geek on with, but not for a new box. Solution 4? rfkill unblock all No effect whatsoever. ubuntu@ubuntu-hp-evny:~$ rfkill unblock all ubuntu@ubuntu-hp-evny:~$ rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Solution 5? Re-install drivers. Done and done. Ubuntu recognizes the device - perhaps even without re-installing the drivers? - but cannot turn it on. How do I know this? In the Network Manager drop-down menu, the wireless option is blacked out and a message reads something like: "wireless network is disabled by a hardware switch". Solution 6? Identify a physical switch on the laptop and flip it. There is no such switch on this machine. In fact, walking through Best Buy yesterday, I checked and not a single new laptop PC had a physical switch on it. All of the wireless switches are either the F2 or F12 key ... I wonder if askubuntu will not be plagued by this exact issue in the near future? Additional info - lspci ubuntu@ubuntu-hp-evny:~$ lspci 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) 08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5229 (rev 01) 0a:00.0 Network controller: Ralink corp. Device 539b 0b:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) Any suggestions would be much appreciated!

    Read the article

  • /etc/X11/xorg.conf doesn't exist?

    - by BBetances
    I'm trying to get my video card properly setup to handle 3D acceleration. After searching a bit, I've come across a few howtos that tell me I need to edit my xorg.conf file. That file doesn't exist. X.org is installed by default, I'm sure, and I figured this video card would be widely supported. 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) Any ideas on how I can get this to work properly and play Starcraft II? Or any game for that matter? No resolution problems or anything, just no 3D rendering.

    Read the article

  • How can I test different TV display types for my XBLIG game?

    - by Steve Dunn
    The XBLIG submission check-list says to ensure that all important stuff critical to game-play be visible in the 'TitleSafeArea'. I've received a bug report during play-test of my game (Crazy Balloon Lite) that says parts of my scrolling 2D map are only half visible (i.e. chopped at the left of the screen). I've tested my game myself on a 47" TV and also a 19" VGA monitor, both of which look fine. The bug report says the issue occurs on a standard 20" TV. My question is: without buying different sizes of TVs, is there a way to test what my game will look like on different sized displays?

    Read the article

  • use ubuntu notebook as second monitor for fedora desktop

    - by YumTum
    I was wondering if there is a possibility to use my netbook with ubuntu 12.04 as a second monitor for my fedora desktop, because its keyboard is broken but everything else is running just fine. I already read about x2x, but I hope there is a more direct way to do this (I mean not over the WLAN but e.g. via LAN etc... ). Would it be possible to directly use the monitor without even running the laptop? For example through an VGA adapter? Thanks for your replies!

    Read the article

  • Why doesn't my graphic card software support 1280*1024?

    - by Allwar
    Hi, I have an external monitor which is an 20" 1280*1024. In windows 7 it works fine with that resolution but in ubuntu it can't. Example: In windows I connect it and activates it, done. In ubuntu I connect and the only resolution that is available is the ones my laptop screen support, 12" 1366*768. My laptop is an asus 1201n. If I force it to use 1280*1024 both screen crashes and i have to force a reboot. When I force it I only force the external monitor, the laptop is already at maximum 1366*768. I connect it throw VGA. ((The graphic card supports 1280*1024 in windows 7, #Fail)) alvar@alvars-laptop:~$ disper -l display DFP-0: HSD121PHW1 resolutions: 320x175, 320x200, 360x200, 320x240, 400x300, 416x312, 512x384, 640x350, 576x432, 640x400, 680x384, 720x400, 640x480, 720x450, 640x512, 700x525, 800x512, 840x525, 800x600, 960x540, 832x624, 1024x768, 1366x768 display CRT-0: CRT-0 resolutions: 320x240, 400x300, 512x384, 680x384, 640x480, 800x600, 1024x768, 1152x864, 1360x768

    Read the article

  • Hide Grub menu and keystroke to reveal

    - by Logan Williams
    How do you have the grub appear on a key combination, but have windows boot default. I'm running ubuntu 11.10 and grub 2.0. Here is my current /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX=" quiet vga=769" Thanks! And here is my /boot/grub/grub.cfg http://pastebin.com/HbDBe8xz

    Read the article

  • How can I get nvidia-settings to work?

    - by Palace Chan
    I have an ASUS N56VM-TB71 with a GeForce 630M graphics card. I have ubuntu 12.04 and when I vga plugged in a dell monitor, i am able to use it. When I then use my laptops hdmi port to plug in my second monitor, nothing happens, so I went to nvidia-settings and I got the error: You do not appear to be using the NVIDIA X Driver, please run nvidia-xconfig as root and restart the X server. I ran this command and rebooted but I still cannot access nvidia-settings and I keep getting that error even though my /etc/X11/xconf.org is the one that got generated by running that command! What can I do to get around that and use my second monitor as well?

    Read the article

  • Cuda GeForce GT 555m (on Ubuntu 12.04 (Virtual Box))

    - by bobby
    I am running Ubuntu 12.04 in a Virtual Box as guest OS. Today I have tried to enable all functions of my graphic card under Ubuntu. But all my efforts were off the mark... because my experience with Linux is relatively small... I have tried the procedure which is described as in http://sn0v.wordpress.com/2012/05/11/installing-cuda-on-ubuntu-12-04/. Running the cuda-filepack always lead to an error like "installing driver canceled". Then I have tried to install the Bumblebee project. But I always get the error that the bumblebee daemon is not started. After some internet research I found a test-command lspci -nn | grep '[030[02]]' which results in 00:02.0 VGA compatible controller [0300]: InnoTek ... [80ee:beef] I've been trying to activate the card you for hours without success. Could you please give me some hints how to activate CUDA? Kind regards

    Read the article

  • How can I determine which GPU card is running at PCI Express 2.0 x16 & which is using x8?

    - by M. Tibbits
    Is there a way to determine the speed of the PCI Express connection to a specific card? I have three cards plugged in: two Nvidia GTX 480's (one at x16 & and one at x8) one Nvidia GTX 460 running at x8 Is there some way, either by a function call in C or an option to lspci that I can determine the bus speed of the graphics cards? When I only use one of the cards for my CUDA program, I'd like to use the one which is running at x16. Thanks! Note: lspci -vvv dumps out For the two GTX 480s. I don't see any differences that pertain to bus speed. 03:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at df00 [disabled] [size=128] [virtual] Expansion ROM at b8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 03:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] Capabilities: <access denied> 04:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at cf00 [size=128] [virtual] Expansion ROM at c8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 04:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 5 Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> And the only differences I see relate specifically to the memory mapping: myComputer:~> diff card1 card2 3c3 < Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 7,11c7,11 < Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] < Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] < Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] < Region 5: I/O ports at df00 [disabled] [size=128] < [virtual] Expansion ROM at b8000000 [disabled] [size=512K] --- > Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] > Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] > Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] > Region 5: I/O ports at cf00 [size=128] > [virtual] Expansion ROM at c8000000 [disabled] [size=512K] 18c18 < Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 19a20 > Latency: 0, Cache Line Size: 64 bytes 21c22 < Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] --- > Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K]

    Read the article

  • Thinkpad T530 with Optimus and Docking Station

    - by Vic Boudolf
    I have a Lenovo Thinkpad T530 with Optimus video, which is not supported on 12.04.1. I don't normally need the discrete (nVidia) graphics, so I turn it off in the BIOS settings to achieve longer battery life (and so that the screen dimmer will work), but when placed in the docking station, the integrated (Intel) graphics don't power the HDMI ports. (The VGA port does work, but I want to focus on the HDMI.) This means I have to change the BIOS settings constantly. Is there any way to have the system detect the docking station and power up/enable the discrete graphics accordingly? I don't need to do it on the fly. Just at startup. This post suggests that bumblebee can turn the discrete graphics on and off for specific applications, but I just want to turn it on or off. [2 suggests that vga_switcheroo will not work with nVidia Optimus.

    Read the article

  • Ubuntu 12.04 Touchscreen Calibration

    - by Lee
    I have a machine with Ubuntu 12.04 installed, with dual monitor, via VGA and DVI Interface. The monitor is one touch screen and the other one is regular LCD Monitor. The touch screen is made in China with some unknown brand, and I am using eGalax Driver. The touch screen is now detected and works, but i need to do some calibration since it does not correctly perform click on touch. The problem is, when I’m using xinput_calibrator, it shows 4 crosses to be clicked on, because I’m using dual monitor, the crosses is now show 2 on the touch screen (touchable) and the others on the other monitor which is regular non-touch monitor. Please help, thank you.

    Read the article

  • No HDMI sound output on Thinkpad X1

    - by nickf
    I'm having problems getting my sound to output via HDMI to my TV. When I go to Sound Settings, the HDMI device does not appear. ~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 I don't know if the video information is helpful, but anyway: ~$ sudo lshw -C video *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:5000(size=64) Any suggestions for me?

    Read the article

  • Graphic issue on intel945 chipset

    - by peeyush tiwari
    I used Intrepid(8.10) and my graphics used to work fine with compiz effects and all(on better resolution than 1024x768).Now I have upgraded to Precise(12.04)but I use gnome classic(with compiz effects)as my desktop but the compiz effects seem not to work, only unity 2D works. When I ran lshw -c video it gives: *-display UNCLAIMED description: VGA compatible controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:fea80000-feafffff ioport:dc00(size=8) memory:e0000000-efffffff memory:fea40000-fea7ffff Sysinfo shows: Display Resolution 1024x768 pixels OpenGL Renderer Gallium 0.4 on llvmpipe(LLVM 0x300) X11 Vendor The X.Org Foundation On SystemSettings: Memory 993.3 MiB Processor Intel® Pentium(R) 4 CPU 2.40GHz Graphics VESA: Intel(r) 82945G Chipset Family Graphics OS type 32-bit glxgears output comes to be around 100fps which used to be around 900fps in Intrepid

    Read the article

  • How do I rotate my monitor using xorg?

    - by user1106405
    I have just installed KUbuntu 12.10, and I am attempting to rotate my monitor 90 deg to the left. When I add the option to rotate, the monitor seems to ignore the directive. I'm currently using dual 02:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1) 03:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1) and NVidia driver version 310 My xorg.conf is as follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 304.51 (buildd@komainu) Fri Oct 12 12:53:49 UTC 2012 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 310.14 ([email protected]) Tue Oct 9 13:04:01 PDT 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 1280 0 Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 60.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 1908WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 EndSection Section "Monitor" Identifier "Monitor2" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:2:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:2:0:0" Screen 1 EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1200 +0+0; DFP-0: 1920x1200_60 +0+0; DFP-0: 1600x1200 +0+0; DFP-0: 1600x1200_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select @1920x1080 +0+0; DFP-0: nvidia-auto-select @1920x720 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1200 +0+0; DFP-0: 1920x1200_60 +0+0; DFP-0: 1600x1200 +0+0; DFP-0: 1600x1200_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-2: nvidia-auto-select +0+0" Option "Rotate" "left" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Enable" EndSection Edit: If I delete the xorg.conf and reboot, I am able to rotate my monitor, however, my third monitor is not recognized: Screen 0: minimum 8 x 8, current 3360 x 1200, maximum 16384 x 16384 DVI-I-0 disconnected (normal left inverted right x axis y axis) DVI-I-1 disconnected (normal left inverted right x axis y axis) DVI-I-2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 60.0*+ 1600x1200 60.0 1280x1024 60.0 1280x960 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI-0 disconnected (normal left inverted right x axis y axis) DVI-I-3 connected 1440x900+1920+0 (normal left inverted right x axis y axis) 408mm x 255mm 1440x900 59.9*+ 75.0 1280x1024 75.0 60.0 1280x800 59.8 1152x864 75.0 1024x768 75.0 70.1 60.0 800x600 75.0 72.2 60.3 56.2 640x480 75.0 72.8 59.9

    Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >