Search Results

Search found 19408 results on 777 pages for 'output formats'.

Page 220/777 | < Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >

  • RS-232 confusion under C++

    - by rock
    What's the problem in given code? Why it is not showing the output for rs232 when we connect it by the d-9 connector with the short of pin number 2 & 3 in that? #include <bios.h> #include <conio.h> #define COM1 0 #define DATA_READY 0x100 #define SETTINGS ( 0x80 | 0x02 | 0x00 | 0x00) int main(void) { int in, out, status; bioscom(0, SETTINGS, COM1); /*initialize the port*/ cprintf("Data sent to you: "); while (1) { status = bioscom(3, 0, COM1); /*wait until get a data*/ if (status & DATA_READY) if ((out = bioscom(2, 0, COM1) & 0x7F) != 0) /*input a data*/ putch(out); if (kbhit()) { if ((in = getch()) == 27) /* ASCII of Esc*/ break; bioscom(1, in, COM1); /*output a data*/ } } return 0; }

    Read the article

  • getting Cannot identify image file when trying to create thumbnail in django

    - by Mo J. Mughrabi
    Am trying to create a thumbnail in django, am trying to build a custom class specifically to be used for generating thumbnails. As following from StringIO import StringIO from PIL import Image class Thumbnail(object): source = '' size = (50, 50) output = '' def __init__(self): pass @staticmethod def load(src): self = Thumbnail() self.source = src return self def generate(self, size=(50, 50)): if not isinstance(size, tuple): raise Exception('Thumbnail class: The size parameter must be an instance of a tuple.') self.size = size # resize properties box = self.size factor = 1 fit = True image = Image.open(self.source) # Convert to RGB if necessary if image.mode not in ('L', 'RGB'): image = image.convert('RGB') while image.size[0]/factor > 2*box[0] and image.size[1]*2/factor > 2*box[1]: factor *=2 if factor > 1: image.thumbnail((image.size[0]/factor, image.size[1]/factor), Image.NEAREST) #calculate the cropping box and get the cropped part if fit: x1 = y1 = 0 x2, y2 = image.size wRatio = 1.0 * x2/box[0] hRatio = 1.0 * y2/box[1] if hRatio > wRatio: y1 = int(y2/2-box[1]*wRatio/2) y2 = int(y2/2+box[1]*wRatio/2) else: x1 = int(x2/2-box[0]*hRatio/2) x2 = int(x2/2+box[0]*hRatio/2) image = image.crop((x1,y1,x2,y2)) #Resize the image with best quality algorithm ANTI-ALIAS image.thumbnail(box, Image.ANTIALIAS) # save image to memory temp_handle = StringIO() image.save(temp_handle, 'png') temp_handle.seek(0) self.output = temp_handle return self def get_output(self): return self.output.read() the purpose of the class is so i can use it inside different locations to generate thumbnails on the fly. The class works perfectly, I've tested it directly under a view.. I've implemented the thumbnail class inside the save method of the forms to resize the original images on saving. in my design, I have two fields for thumbnails. I was able to generate one thumbnail, if I try to generate two it crashes and I've been stuck for hours not sure whats the problem. Here is my model class Image(models.Model): article = models.ForeignKey(Article) title = models.CharField(max_length=100, null=True, blank=True) src = models.ImageField(upload_to='publication/image/') r128 = models.ImageField(upload_to='publication/image/128/', blank=True, null=True) r200 = models.ImageField(upload_to='publication/image/200/', blank=True, null=True) uploaded_at = models.DateTimeField(auto_now=True) Here is my forms class ImageForm(models.ModelForm): """ """ class Meta: model = Image fields = ('src',) def save(self, commit=True): instance = super(ImageForm, self).save(commit=True) file = Thumbnail.load(instance.src) instance.r128 = SimpleUploadedFile( instance.src.name, file.generate((128, 128)).get_output(), content_type='image/png' ) instance.r200 = SimpleUploadedFile( instance.src.name, file.generate((200, 200)).get_output(), content_type='image/png' ) if commit: instance.save() return instance the strange part is, when i remove the line which contains instance.r200 in the form save. It works fine, and it does the thumbnail and stores it successfully. Once I add the second thumbnail it fails.. Any ideas what am doing wrong here? Thanks Update: I tried earlier doing the following but I still got the same error class ImageForm(models.ModelForm): """ """ class Meta: model = Image fields = ('src',) def save(self, commit=True): instance = super(ImageForm, self).save(commit=True) instance.r128 = SimpleUploadedFile( instance.src.name, Thumbnail.load(instance.src).generate((128, 128)).get_output(), content_type='image/png' ) instance.r200 = SimpleUploadedFile( instance.src.name, Thumbnail.load(instance.src).generate((200, 200)).get_output(), content_type='image/png' ) if commit: instance.save() return instance

    Read the article

  • How to reset the language of the package descriptions

    - by xubuntix
    I have had German as my main language about a year ago. Later I changed it to English. Most parts of the system accepted the change. The notable exceptions are the package descriptions, which remain in German for some packages. You can see in the image (apt-cache and software-center), that while some descriptions are in English, some have remained in German. So the question is: how do I reset this? I guess that there is somewhere a description cache that needs to be told that it should update all descriptions? EDIT: As asked: the output of some language related commands: $ cat /etc/default/locale LANG="en_US.UTF-8" $ apt-config dump | grep Lang Acquire::Languages ""; Acquire::Languages:: "de_DE"; Acquire::Languages:: "de"; Acquire::Languages:: "en"; Acquire::Languages:: "none"; $ locale LANG=de_DE.UTF-8 LANGUAGE=en LC_CTYPE="de_DE.UTF-8" LC_NUMERIC="de_DE.UTF-8" LC_TIME="de_DE.UTF-8" LC_COLLATE="de_DE.UTF-8" LC_MONETARY="de_DE.UTF-8" LC_MESSAGES="de_DE.UTF-8" LC_PAPER="de_DE.UTF-8" LC_NAME="de_DE.UTF-8" LC_ADDRESS="de_DE.UTF-8" LC_TELEPHONE="de_DE.UTF-8" LC_MEASUREMENT="de_DE.UTF-8" LC_IDENTIFICATION="de_DE.UTF-8" LC_ALL= As a note: I'm not sure what each entry means, but some of the de_DE.UTF-8 are probably ok, since I do want paper-sizes, monetary, time, etc. in standard German formats.

    Read the article

  • Using current database name in T-SQL has Using statement

    - by AmRoSH
    Hello everybody. I have application runs T-SQL statements to update more than one database the problem is i'm using the following t-sql USE [msdb] GO DECLARE @jobId BINARY(16) EXEC msdb.dbo.sp_add_job @job_name=N'test2', @enabled=1, @start_step_id=1, @notify_level_eventlog=0, @notify_level_email=2, @notify_level_netsend=2, @notify_level_page=2, @delete_level=0, @description=N'', @category_name=N'[Uncategorized (Local)]', @owner_login_name=N'sa', @notify_email_operator_name=N'', @notify_netsend_operator_name=N'', @notify_page_operator_name=N'', @job_id = @jobId OUTPUT select @jobId GO EXEC msdb.dbo.sp_add_jobserver @job_name=N'test2', @server_name = N'AMR-PC\SQL2008' GO USE [msdb] GO EXEC msdb.dbo.sp_add_jobstep @job_name=N'test2', @step_name=N'test', @step_id=1, @cmdexec_success_code=0, @on_success_action=1, @on_fail_action=2, @retry_attempts=0, @retry_interval=0, @os_run_priority=0, @subsystem=N'TSQL', @command=N'EXEC sp_MSforeachdb '' EXEC sp_MSforeachtable @command1=''''DBCC DBREINDEX (''''''''*'''''''')'''', @replacechar=''''*''''''', @database_name=N'Client5281', @output_file_name=N'C:\Documents and Settings\Amr\Desktop\Scheduel Reports\report', @flags=2 GO USE [msdb] GO DECLARE @schedule_id int EXEC msdb.dbo.sp_add_jobschedule @job_name=N'test2', @name=N'test', @enabled=1, @freq_type=8, @freq_interval=1, @freq_subday_type=1, @freq_subday_interval=0, @freq_relative_interval=0, @freq_recurrence_factor=1, @active_start_date=20100517, @active_end_date=99991231, @active_start_time=0, @active_end_time=235959, @schedule_id = @schedule_id OUTPUT select @schedule_id GO and i'm using (USE [msdb]) before any block and i want to get database name to replace this @database_name=N'**Client5281**', with the current database name instead of ([msdb]) that i'm using. i hope that i explained what i want well.

    Read the article

  • Show surrounding words when searching for a specific word in a text file (Ruby)

    - by Ezra
    Hi, I'm very new to ruby. I'm trying to search for any instance of a word in a text file (not the problem). Then when the word is discovered, it would show the surrounding text (maybe 3-4 words before and after the target word, instead of the whole line), output to a list of instances and continue searching. Example "The quick brown fox jumped over the lazy dog." Search word = "jumped" Output = "...brown fox jumped over the..." Any help is appreciated. Thanks! Ezra def word_exists_in_file f = File.open("test.txt") f.each do line print line if line.match /someword/ return true end end false end

    Read the article

  • Setting precision on std::cout in entire file scope - C++ iomanip

    - by Ivan
    Hi all, I'm doing some calculations, and the results are being save in a file. I have to output very precise results, near the precision of the double variable, and I'm using the iomanip setprecision(int) for that. The problem is that I have to put the setprecision everywhere in the output, like that: func1() { cout<<setprecision(12)<<value; cout<<setprecision(10)<<value2; } func2() { cout<<setprecision(17)<<value4; cout<<setprecision(3)<<value42; } And that is very cumbersome. Is there a way to set more generally the cout fixed modifier? Thanks

    Read the article

  • empty() returning TRUE on object's non-empty property

    - by Michal M
    I've got a very weird and unexpected problem. empty() is returning TRUE on a non-empty property for a reason unknown to me. class MyObject { private $_property; public function __construct($property) { $this->_property = $property; } public function __get($name) { $priv_name = "_{$name}"; if (isset($this->$priv_name)) { return $this->$priv_name; } else { return NULL; } } } $obj = new MyObject('string value'); echo $obj->property; // Output 'string value' echo empty($obj->property); // Output 1 (means, that property is empty) Would this mean, that the __get() magic function is not called when using empty()? btw. I'm running PHP version 5.0.4

    Read the article

  • Does MultiThreading in Java takes much time for task completion?

    - by Geeta
    I have to search for a string in 10 large size files (in zip format 70 MB) and have to print the lines with the search string to corresponding 10 output files.(i.e. file 1 output should be in output_file1...file2--- output_file2). The same program takes 15 mins for a single file. But if use 10 threads to read 10 files and to write in 10 different files it should complete in 15 mins but its taking 40 mins. How can I solve this. Or multithreading will take this much time only?

    Read the article

  • jQuery wait for ajax call to be over before continuing

    - by Flo
    Hi all, I have a problem with a jQuery ajax call. I need to wait for the call to be finished in order to return a value. However, the script seems to jump ahead and not wait for the call to be over. my function then returns "undefined". I have tried to use the .ajax() method and set the value of async to false, but this would not work either. I could I get my function to return the value that I could through the ajax call? Thank you! Here is the code: function get_rsrce_name(){ jQuery.post( '<?php echo admin_url( 'admin-ajax.php' ); ?>', { action :'my_action', option_rsrce : 'option_rsrce' }, function( data ) { output = data.option_name; }, "json" ); return output; }

    Read the article

  • How to call an xslt transform into an xsl stylesheet

    - by Mycol
    I have written an xslt that reads some xml file names and does some operations on them. I use a for-each to work them one-by-one. I have each path inside a parameter $path. But now I would like to output the result of applying an external stylesheet to those files. I would write something like <div> <something like xsl-transform($extern-xslt,$path)> </div> to have the result tree of the transformation inside the main html output. It is possible?

    Read the article

  • Finding position of each word in a sub-array of a multidimensional array

    - by Shreyas Satish
    I have an array: tokens = [["hello","world"],["hello","ruby"]] all_tokens = tokens.flatten.uniq # all_tokens=["hello","world","ruby"] Now I need to create two arrays corresponding to all_tokens, where the first array will contain the position of each word in sub-array of tokens. I.E Output: [[0,0],[1],[1]] # (w.r.t all_tokens) To make it clear it reads, The index of "hello" is 0 and 0 in the 2 sub-arrays of tokens. And second array contains index of each word w.r.t tokens.I.E Output: [[0,1],[0],[1]] To make it clear it reads,the index of hello 0,1. I.E "hello" is in index 0 and 1 of tokens array. Cheers!

    Read the article

  • HDA NVidia (GT520) - Sound Issue

    - by Oliver Lucas
    I have an GT520 graphics card and I am trying to get the sound working with my XBMC setup and I'm having trouble. Things I have completed: aplay -l List of PLAYBACK Hardware Devices card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 then lspci 01:00.1 Audio device: nVidia Corporation HDMI Audio stub (rev a1) and alsamixer which is set to unmuted Everything looks well, so ran: aplay -D hw:0,3 /home/ollie/Music/alex.mp3 Playing raw data '/home/ollie/Music/alex.mp3' : Unsigned 8 bit, Rate 8000 Hz, Mono aplay: set_params:1059: Sample format non available Available formats: - S16_LE - S32_LE with no luck.. then speaker-test Playback device is default Stream parameters are 48000Hz, S16_LE, 1 channels Using 16 octaves of pink noise Playback open error: -2,No such file or directory also tried running through ftp://download.nvidia.com/XFree86/gpu-hdmi-audio-document/gpu-hdmi-audio.html#upgrading_alsa_driver and http://wiki.xbmc.org/index.php?title=HOW-TO:Setup_audio_over_HDMI_on_nVidia_GeForce/nForce_controller plus 20 other websites with selective "fixes" etc.. but no luck _< I am a complete beginner with Ubuntu so this is a really steep learning curve for me, not sure I'm learning much though as its all just headaches atm! Thanks for any help Ollie

    Read the article

  • c# convert file from one format to another

    - by JOE SKEET
    i have a bunch of files that need to be converted. the beginning files look like this: Well ID,Error code,Sample Barcode A1,0,THC_CAL1 B1,0,THC_CAL2 C1,1,THC_CAL3 D1,0,THC_CAL4 E1,0,THC_QC1 F1,0,THC_QC2 G1,0,THC_QC3 H1,0,THC_QC4 A2,0,BLANK0609 B2,0,AA178121 C2,0,CC37815 D2,0,BLANK0610 E2,0,CC37819 F2,0,N150680 G2,0,BLANK0611 H2,0,AA127900 A3,0,AA26940 B3,0,BLANK0612 ........... the output needs to look like this: A01 THC_CAL1 B01 THC_CAL2 D01 THC_CAL4 //please note that c1 is gone since it did not have a 0 in the middle column E01 THC_QC1 F01 THC_QC2 G01 THC_QC3 H01 THC_QC4 A02 BLANK0609 B02 AA178121 C02 CC37815 D02 BLANK0610 E02 CC37819 F02 N150680 G02 BLANK0611 H02 AA127900 A03 AA26940 B03 BLANK0612 H10 BLANK0234 //please notice that there is H10 and not H010 what would be the best way to read this file into a variable and then output this into a new file? should i read it line by line or should i read it into a datatable?

    Read the article

  • Listing and deleting Git commits that are under no branch (dangling?)

    - by Samer Abukhait
    I've got a git repository with plenty of commits that are under no particular branch, I can git show them but when I try to list branches that contain them, it reports back nothing: I thought this is the dangling commits/tree issue (as a result of -D branch), so I pruned the repo, but I still see the case after that: $ git fetch origin $ git fsck --unreachable $ git fsck No output, nothing dangling (right?) $ git show 793db7f272ba4bbdd1e32f14410a52a412667042 commit 793db7f272ba4bbdd1e32f14410a52a412667042 Author: .. But $ git branch --contains 793db7f272ba4bbdd1e32f14410a52a412667042 Gives no output What exactly is the state of that commit? How can I list all commits with similar state, How can I delete commits like those?

    Read the article

  • What are the advantages to use vector-based fonts over bitmap fonts in (2d) games?

    - by jmp97
    I know that many games are using bitmap fonts. Which are the advantages for vector-based font rendering / manipulation when compared to bitmap fonts and in which scenarios would they matter the most? Prefer a focus on 2d games when answering this question. If relevant, please include examples for games using either approach. Some factors you might consider: amount of text used in the game scaling of text overlaying glyphs and anti-aliasing general rendering quality font colors and styling user interface requirements localisation / unicode text wrapping and formatting cross-platform deployment 2d vs 3d Background: I am developing a simple falling blocks game in 2d, targeted for pc. I would like to add text labels for level, score, and menu buttons. I am using SFML which uses FreeType internally, so vector-based features are easily available for my project. In my view, font sizes in simple games often don't vary, and bitmap fonts should be easier for cross-platform concerns (font-formats and font rendering quality). But I am unsure if I am missing some important points here, especially since I want to polish the looks of the final game.

    Read the article

  • How to order by results from 2 seperate tables in PHP and MySQL.

    - by Vafello
    I am trying to output results of 2 sql queries to one JSON file. The problem is that I would like to order them ascending by distance which is the result of equation that takes homelat and homelon from the users table and lat, lng from locations table.(basically it takes lattitude and longitude of one point and another and computes the distance between these points). Is it possible to take some parameters from both select queries, compute it and output the result in ascending order? $wynik = mysql_query("SELECT homelat, homelon FROM users WHERE guid='2'") or die(mysql_error()); ; $query = "SELECT * FROM locations WHERE timestamp"; $result = map_query($query); $points = array(); while ($aaa = mysql_fetch_assoc($wynik)) { while ($row = mysql_fetch_array($result, MYSQL_ASSOC)) { array_push($points, array('name'=>$row['name'], 'lat'=>$row['lat'], 'lng'=>$row['lng'], 'description'=>$row['description'], 'eventType'=>$row['eventType'], 'date'=>$row['date'], 'isotime'=>date('c', ($row['timestamp'])), 'homelat'=>$aaa['homelat'], 'homelon'=>$aaa['homelon'])); } echo json_encode(array("Locations"=>$points));

    Read the article

  • Confused about "override" vs. "new" in C#

    - by iTayb
    I'm having the following classes: class Base { public virtual void Print() { Console.WriteLine("Base"); } } class Der1 : Base { public new virtual void Print() { Console.WriteLine("Der1"); } } class Der2 : Der1 { public override void Print() { Console.WriteLine("Der2"); } } This is my main method: Base b = new Der2(); Der1 d1 = new Der2(); Der2 d2 = new Der2(); b.Print(); d1.Print(); d2.Print(); The output is Base, Der2, Der2. As far as I know, Override won't let previous method to run, even if the pointer is pointing to them. So the first line should output Der2 as well. However Base came out. How is it possible? How the override didn't work there?

    Read the article

  • Rails streaming file download

    - by Leonard Teo
    I'm trying to implement a file download with Rails. I want to eventually migrate this code to using S3 to serve the file. I've copied the Rails send_file code almost verbatim and I cannot seem to get it to stream a file to the user. What happens is that it sends 'a' file to the user, but the downloaded file itself simply contains the text.inspect of the Proc: # What am I doing wrong here? options = {} options[:length] = File.size(file.path) options[:filename] = File.basename(file.path) send_file_headers! options render :status => 200, :text => Proc.new { |response, output| len = 4096 File.open(file.path, 'rb') do |fh| while buf = fh.read(len) output.write(buf) end end } Ps: I've read in a number of other posts that it's not advisable to send files through the Rails stack, and if possible serve using the web server, or in the case of S3 use the hashed URL it can provide. Yes, we really do want to serve the file through the Rails stack.

    Read the article

  • How do I bypass GUI in MFC app if command line options exist?

    - by Brandon
    I've got an existing simple MFC app that the user specifies the input file, output file, and then a "Process" button. I'd like to just add the capability so that the input/output files are command line parameters. But, if they exist, I don't want the GUI to show up. I just want the "Process" to execute. I see where I can get the command line parameters (m_lpCmdLine) but how can I bypass the displaying of the GUI? If I step into the app, it goes directly to winmain.cpp and displays the GUI without stepping into any of my code.

    Read the article

  • Get variable name as string in Perl

    - by Jose Cuervo
    Hi, I am trying to get a text representation of a variable's name. For instance, this would be the function I am looking for: $abc = '123'; $var_name = &get_var_name($abc); #returns '$abc' I want this because I am trying to write a debug function that recursively outputs the contents of a passed variable, I want it to output the variable's name before hand so if I call this debug function 100 times in succession there will be no confusion as to which variable I am looking at in the output. I have heard of Data::Dumper and am not a fan. If someone can tell me how to if it's possible get a string of a variable's name, that would be great. Thanks!

    Read the article

  • Where did I write that code ?

    - by Tarun Arora
    Every been in that situation when you desperately need to find that code you checked into TFS a few days back but just can’t remember what team project, what branch, what solution or what file you checked it into. Well you are not alone… Only if there was a way to efficiently search for files and text with in TFS. It is possible… You need to get your hands on Agent Ransack… This is a stand a lone tool that does not integrate with TFS but gives you the capability to search through text files effortlessly. Agent Ransack searches through files, text or otherwise, fast and efficiently. When searching the contents of files for code, or other text, Agent Ransack displays the text found so you can quickly browse the results without having to separately open each file! Agent Ransack is free for both Personal and Commercial use and can be Download from here.   Set the Look In directory of the Ransack search tool to your TFS Workspace and type the text you would like to scan for, you can limit the search by narrowing down the filter path or the name of the file. Found text is shown with highlighted keywords so you don't need to waste time opening each file looking for the right information.         The regular expression wizard helps you build regular expressions for complex pattern matching searches         You even have the option of searching by modified, created or last accessed date          Export your results to a file for importing into other apps or for sharing with others          Agent Ransack also provides search support for popular Office formats including Office 2007 and OpenOffice Next time you are looking for that illusive line of code whether it is a method declaration, function call, or algorithm that you checked into TFS, use Agent Ransack for a quick search.

    Read the article

  • improve my python program to fetch the desire rows by using if condition

    - by user2560507
    unique.txt file contains: 2 columns with columns separated by tab. total.txt file contains: 3 columns each column separated by tab. I take each row from unique.txt file and find that in total.txt file. If present then extract entire row from total.txt and save it in new output file. ###Total.txt column a column b column c interaction1 mitochondria_205000_225000 mitochondria_195000_215000 interaction2 mitochondria_345000_365000 mitochondria_335000_355000 interaction3 mitochondria_345000_365000 mitochondria_5000_25000 interaction4 chloroplast_115000_128207 chloroplast_35000_55000 interaction5 chloroplast_115000_128207 chloroplast_15000_35000 interaction15 2_10515000_10535000 2_10505000_10525000 ###Unique.txt column a column b mitochondria_205000_225000 mitochondria_195000_215000 mitochondria_345000_365000 mitochondria_335000_355000 mitochondria_345000_365000 mitochondria_5000_25000 chloroplast_115000_128207 chloroplast_35000_55000 chloroplast_115000_128207 chloroplast_15000_35000 mitochondria_185000_205000 mitochondria_25000_45000 2_16595000_16615000 2_16585000_16605000 4_2785000_2805000 4_2775000_2795000 4_11395000_11415000 4_11385000_11405000 4_2875000_2895000 4_2865000_2885000 4_13745000_13765000 4_13735000_13755000 My program: file=open('total.txt') file2 = open('unique.txt') all_content=file.readlines() all_content2=file2.readlines() store_id_lines = [] ff = open('match.dat', 'w') for i in range(len(all_content)): line=all_content[i].split('\t') seq=line[1]+'\t'+line[2] for j in range(len(all_content2)): if all_content2[j]==seq: ff.write(seq) break Problem: but istide of giving desire output (values of those 1st column that fulfile the if condition). i nead somthing like if jth of unique.txt == ith of total.txt then write ith row of total.txt into new file.

    Read the article

  • Write an xml file from the specified node?

    - by Googler
    Hi all, This is my xml file Input: <world> <patent> <xml>a</xml> <java>333</java> <jaxb>111</jaxb> </patent> </world> I need the read the above xml file and reproduce the following the output Output: <patent> <xml>a</xml> <java>333</java> <jaxb>111</jaxb> </patent> I dont need the world element. How to achieve this using Xpath. Can anyone help me on this?

    Read the article

< Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >