Search Results

Search found 5597 results on 224 pages for 'sudo rm rf'.

Page 220/224 | < Previous Page | 216 217 218 219 220 221 222 223 224  | Next Page >

  • Persistent static routes fail on MacOS 10.6.5 startup!

    - by verbalicious
    I'm unable to get static routes to persist a reboot on Mac OS 10.6.5. I've tried all of the methods prescribed in Google search results, and previous posts on this site. I've tried manually creating a launchd daemon, and used RouteSplit's launchd daemon to no avail. It's clear that the interface is not ready when these methods attempt to apply the route. This workstation in question is getting its IP from DHCP and probably hasn't gotten its DHCP lease when the command runs. We're able to apply the route by hand when logged in, but not through startup methods. Is there another way to apply this route by sneaking the command into something later, but before the login window appears to the user? Here is some relevant log info from system.log. You can see the "route: writing to routing socket: Network is unreachable" errors where my launchd script fires off. I've tried adding extra "sleep" and "ipconfig waitall" statements later in the script but this doesn't fly. Dec 15 19:30:41 localhost com.apple.launchd[1]: *** launchd[1] has started up. *** Dec 15 19:30:45 localhost mDNSResponder[18]: mDNSResponder mDNSResponder-258.13 (Oct 8 2010 17:10:30) starting Dec 15 19:30:47 localhost configd[15]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50) Dec 15 19:30:47 localhost configd[15]: DHCP en1: INIT transmit failed Dec 15 19:30:47 localhost configd[15]: network configuration changed. Dec 15 19:30:47 Administrators-MacBook-Pro configd[15]: setting hostname to "Administrators-MacBook-Pro.local" Dec 15 19:30:47 Administrators-MacBook-Pro blued[16]: Apple Bluetooth daemon started Dec 15 19:30:52 Administrators-MacBook-Pro syslog[67]: routes.sh: Starting RouteSplit Dec 15 19:30:53 Administrators-MacBook-Pro com.apple.usbmuxd[41]: usbmuxd-207 built for iTunesTenOne on Oct 19 2010 at 13:50:35, running 64 bit Dec 15 19:30:54 Administrators-MacBook-Pro /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[50]: Login Window Application Started Dec 15 19:30:55 Administrators-MacBook-Pro bootlog[61]: BOOT_TIME: 1292459441 0 Dec 15 19:30:55 Administrators-MacBook-Pro syslog[86]: routes.sh: static route 192.168.0.0/23 192.168.2.2 Dec 15 19:30:55 Administrators-MacBook-Pro net.routes.static[65]: route: writing to routing socket: Network is unreachable Dec 15 19:30:55 Administrators-MacBook-Pro net.routes.static[65]: add net 192.168.0.0: gateway 192.168.2.2: Network is unreachable Dec 15 19:30:57 Administrators-MacBook-Pro org.apache.httpd[38]: httpd: Could not reliably determine the server's fully qualified domain name, using Administrators-MacBook-Pro.local for ServerName Dec 15 19:30:58 Administrators-MacBook-Pro loginwindow[50]: Login Window Started Security Agent Dec 15 19:30:58 Administrators-MacBook-Pro WindowServer[89]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged. Dec 15 19:30:58 Administrators-MacBook-Pro com.apple.WindowServer[89]: Wed Dec 15 19:30:58 Administrators-MacBook-Pro.local WindowServer[89] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged. Dec 15 19:31:18 Administrators-MacBook-Pro configd[15]: network configuration changed. Dec 15 19:31:19 administrators-macbook-pro configd[15]: setting hostname to "administrators-macbook-pro.local" Dec 15 19:31:25 administrators-macbook-pro _mdnsresponder[121]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds Dec 15 19:31:25 administrators-macbook-pro _mdnsresponder[124]: sntp options: a=2 v=1 e=0.100 E=5.000 P=2147483647.000 Dec 15 19:31:25 administrators-macbook-pro _mdnsresponder[124]: d=15 c=5 x=0 op=1 l=/var/run/sntp.pid f= time.apple.com Dec 15 19:31:25 administrators-macbook-pro _mdnsresponder[124]: sntp: getaddrinfo(hostname, ntp) failed with nodename nor servname provided, or not known Dec 15 19:31:27 administrators-macbook-pro configd[15]: network configuration changed. Dec 15 19:31:27 Administrators-MacBook-Pro configd[15]: setting hostname to "Administrators-MacBook-Pro.local" Dec 15 19:31:27 Administrators-MacBook-Pro ntpd[37]: Cannot find existing interface for address 17.151.16.20 Dec 15 19:31:27 Administrators-MacBook-Pro ntpd_initres[125]: ntpd indicates no data available! Dec 15 19:31:31 Administrators-MacBook-Pro sshd[128]: USER_PROCESS: 133 ttys000 Dec 15 19:31:37 Administrators-MacBook-Pro sudo[138]: administrator : TTY=ttys000 ; PWD=/Users/administrator ; USER=root ; COMMAND=/usr/bin/less /var/log/system.log ``You can see the following line in /var/log/kernel.log that shows the en0 interface coming up: Dec 15 19:30:51 Administrators-MacBook-Pro kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control, Debug [796d,0f01,0de1,0300,c1e1,3800]

    Read the article

  • install python2.7.3 + numpy + scipy + matplotlib + scikits.statsmodels + pandas0.7.3 correctly

    - by boldnik
    ...using Linux (xubuntu). How to install python2.7.3 + numpy + scipy + matplotlib + scikits.statsmodels + pandas0.7.3 correctly ? My final aim is to have them working. The problem: ~$ python --version Python 2.7.3 so i already have a system-default 2.7.3, which is good! ~$ dpkg -s python-numpy Package: python-numpy Status: install ok installed and i already have numpy installed! great! But... ~$ python Python 2.7.3 (default, Oct 23 2012, 01:07:38) [GCC 4.6.1] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import numpy as nmp Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: No module named numpy this module couldn't be find by python. The same with scipy, matplotlib. Why? ~$ sudo apt-get install python-numpy [...] Reading package lists... Done Building dependency tree Reading state information... Done python-numpy is already the newest version. [...] why it does not see numpy and others ? update: >>> import sys >>> print sys.path ['', '/usr/local/lib/python27.zip', '/usr/local/lib/python2.7', '/usr/local/lib/python2.7/plat-linux2', '/usr/local/lib/python2.7/lib-tk', '/usr/local/lib/python2.7/lib-old', '/usr/local/lib/python2.7/lib-dynload', '/usr/local/lib/python2.7/site-packages'] >>> so i do have /usr/local/lib/python2.7 ~$ pip freeze Warning: cannot find svn location for distribute==0.6.16dev-r0 BzrTools==2.4.0 CDApplet==1.0 [...] matplotlib==1.0.1 mutagen==1.19 numpy==1.5.1 [...] pandas==0.7.3 papyon==0.5.5 [...] pytz==2012g pyxdg==0.19 reportlab==2.5 scikits.statsmodels==0.3.1 scipy==0.11.0 [...] zope.interface==3.6.1 as you can see, those modules are already installed! But! ls -la /usr/local/lib/ gives ONLY python2.7 dir. And still ~$ python -V Python 2.7.3 and import sys sys.version '2.7.3 (default, Oct 23 2012, 01:07:38) \n[GCC 4.6.1]' updated: Probably I've missed another instance... One at /usr/Python-2.7.3/ and second (seems to be installed "by hands" far far ago) at /usr/python2.7.3/Python-2.7.3/ But how two identical versions can work at the same time??? Probably, one of them is "disabled" (not used by any program, but I don't know how to check if any program uses it). ~$ ls -la /usr/bin/python* lrwxrwxrwx 1 root root 9 2011-11-01 11:11 /usr/bin/python -> python2.7 -rwxr-xr-x 1 root root 2476800 2012-09-28 19:48 /usr/bin/python2.6 -rwxr-xr-x 1 root root 1452 2012-09-28 19:45 /usr/bin/python2.6-config -rwxr-xr-x 1 root root 2586060 2012-07-21 01:42 /usr/bin/python2.7 -rwxr-xr-x 1 root root 1652 2012-07-21 01:40 /usr/bin/python2.7-config lrwxrwxrwx 1 root root 9 2011-10-05 23:53 /usr/bin/python3 -> python3.2 lrwxrwxrwx 1 root root 11 2011-09-06 02:04 /usr/bin/python3.2 -> python3.2mu -rwxr-xr-x 1 root root 2852896 2011-09-06 02:04 /usr/bin/python3.2mu lrwxrwxrwx 1 root root 16 2011-10-08 19:50 /usr/bin/python-config -> python2.7-config there is a symlink python-python2.7, maybe I can ln -f -s this link to exact /usr/Python-2.7.3/python destination without harm ?? And how correctly to remove the 'copy' of 2.7.3?

    Read the article

  • org-sort multi: date/time (?d ?t) | priority (?p) | title (?a)

    - by lawlist
    Is anyone aware of an org-sort function / modification that can refile / organize a group of TODO so that it sorts them by three (3) criteria: first sort by due date, second sort by priority, and third sort by by title of the task? EDIT: I believe that org-sort by deadline (?d) has a bug that cannot properly handle undated tasks. I am working on a workaround (i.e., moving the undated todo to a different heading before the deadline (?d) sort occurs), but perhaps the best thing to do would be to try and fix the original sorting function. Development of the workaround can be found in this thread (i.e., moving the undated tasks to a different heading in one fell swoop): How to automate org-refile for multiple todo EDIT: Apparently, the following code (ancient history) that I found on the internet was eventually modified and included as a part of org-sort-entries. Unfortunately, undated todo are not properly sorted when sorting by deadline -- i.e., they are mixed in with the dated todo. ;; multiple sort (defun org-sort-multi (&rest sort-types) "Multiple sorts on a certain level of an outline tree, or plain list items. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Example: To sort first by TODO status, then by priority, then by date, then alphabetically (case-sensitive) use the following call: (org-sort-multi '(?d ?p ?t (t . ?a)))" (interactive) (dolist (x (nreverse sort-types)) (when (char-valid-p x) (setq x (cons nil x))) (condition-case nil (org-sort-entries (car x) (cdr x)) (error nil)))) ;; sort current level (defun lawlist-sort (&rest sort-types) "Sort the current org level. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Defaults to \"?o ?p\" which is sorted by TODO status, then by priority" (interactive) (when (equal mode-name "Org") (let ((sort-types (or sort-types (if (or (org-entry-get nil "TODO") (org-entry-get nil "PRIORITY")) '(?d ?t ?p) ;; date, time, priority '((nil . ?a)))))) (save-excursion (outline-up-heading 1) (let ((start (point)) end) (while (and (not (bobp)) (not (eobp)) (<= (point) start)) (condition-case nil (outline-forward-same-level 1) (error (outline-up-heading 1)))) (unless (> (point) start) (goto-char (point-max))) (setq end (point)) (goto-char start) (apply 'org-sort-multi sort-types) (goto-char end) (when (eobp) (forward-line -1)) (when (looking-at "^\\s-*$") ;; (delete-line) ) (goto-char start) ;; (dotimes (x ) (org-cycle)) ))))) EDIT: Here is a more modern version of multi-sort, which is likely based upon further development of the above-code: (defun org-sort-all () (interactive) (save-excursion (goto-char (point-min)) (while (re-search-forward "^\* " nil t) (goto-char (match-beginning 0)) (condition-case err (progn (org-sort-entries t ?a) (org-sort-entries t ?p) (org-sort-entries t ?o) (forward-line)) (error nil))) (goto-char (point-min)) (while (re-search-forward "\* PROJECT " nil t) (goto-char (line-beginning-position)) (ignore-errors (org-sort-entries t ?a) (org-sort-entries t ?p) (org-sort-entries t ?o)) (forward-line)))) EDIT: The best option will be to fix sorting of deadlines (?d) so that undated todo are moved to the bottom of the outline, instead of mixed in with the dated todo. Here is an excerpt from the current org.el included within Emacs Trunk (as of July 1, 2013): (defun org-sort (with-case) "Call `org-sort-entries', `org-table-sort-lines' or `org-sort-list'. Optional argument WITH-CASE means sort case-sensitively." (interactive "P") (cond ((org-at-table-p) (org-call-with-arg 'org-table-sort-lines with-case)) ((org-at-item-p) (org-call-with-arg 'org-sort-list with-case)) (t (org-call-with-arg 'org-sort-entries with-case)))) (defun org-sort-remove-invisible (s) (remove-text-properties 0 (length s) org-rm-props s) (while (string-match org-bracket-link-regexp s) (setq s (replace-match (if (match-end 2) (match-string 3 s) (match-string 1 s)) t t s))) s) (defvar org-priority-regexp) ; defined later in the file (defvar org-after-sorting-entries-or-items-hook nil "Hook that is run after a bunch of entries or items have been sorted. When children are sorted, the cursor is in the parent line when this hook gets called. When a region or a plain list is sorted, the cursor will be in the first entry of the sorted region/list.") (defun org-sort-entries (&optional with-case sorting-type getkey-func compare-func property) "Sort entries on a certain level of an outline tree. If there is an active region, the entries in the region are sorted. Else, if the cursor is before the first entry, sort the top-level items. Else, the children of the entry at point are sorted. Sorting can be alphabetically, numerically, by date/time as given by a time stamp, by a property or by priority. The command prompts for the sorting type unless it has been given to the function through the SORTING-TYPE argument, which needs to be a character, \(?n ?N ?a ?A ?t ?T ?s ?S ?d ?D ?p ?P ?o ?O ?r ?R ?f ?F). Here is the precise meaning of each character: n Numerically, by converting the beginning of the entry/item to a number. a Alphabetically, ignoring the TODO keyword and the priority, if any. o By order of TODO keywords. t By date/time, either the first active time stamp in the entry, or, if none exist, by the first inactive one. s By the scheduled date/time. d By deadline date/time. c By creation time, which is assumed to be the first inactive time stamp at the beginning of a line. p By priority according to the cookie. r By the value of a property. Capital letters will reverse the sort order. If the SORTING-TYPE is ?f or ?F, then GETKEY-FUNC specifies a function to be called with point at the beginning of the record. It must return either a string or a number that should serve as the sorting key for that record. Comparing entries ignores case by default. However, with an optional argument WITH-CASE, the sorting considers case as well." (interactive "P") (let ((case-func (if with-case 'identity 'downcase)) (cmstr ;; The clock marker is lost when using `sort-subr', let's ;; store the clocking string. (when (equal (marker-buffer org-clock-marker) (current-buffer)) (save-excursion (goto-char org-clock-marker) (looking-back "^.*") (match-string-no-properties 0)))) start beg end stars re re2 txt what tmp) ;; Find beginning and end of region to sort (cond ((org-region-active-p) ;; we will sort the region (setq end (region-end) what "region") (goto-char (region-beginning)) (if (not (org-at-heading-p)) (outline-next-heading)) (setq start (point))) ((or (org-at-heading-p) (condition-case nil (progn (org-back-to-heading) t) (error nil))) ;; we will sort the children of the current headline (org-back-to-heading) (setq start (point) end (progn (org-end-of-subtree t t) (or (bolp) (insert "\n")) (org-back-over-empty-lines) (point)) what "children") (goto-char start) (show-subtree) (outline-next-heading)) (t ;; we will sort the top-level entries in this file (goto-char (point-min)) (or (org-at-heading-p) (outline-next-heading)) (setq start (point)) (goto-char (point-max)) (beginning-of-line 1) (when (looking-at ".*?\\S-") ;; File ends in a non-white line (end-of-line 1) (insert "\n")) (setq end (point-max)) (setq what "top-level") (goto-char start) (show-all))) (setq beg (point)) (if (>= beg end) (error "Nothing to sort")) (looking-at "\\(\\*+\\)") (setq stars (match-string 1) re (concat "^" (regexp-quote stars) " +") re2 (concat "^" (regexp-quote (substring stars 0 -1)) "[ \t\n]") txt (buffer-substring beg end)) (if (not (equal (substring txt -1) "\n")) (setq txt (concat txt "\n"))) (if (and (not (equal stars "*")) (string-match re2 txt)) (error "Region to sort contains a level above the first entry")) (unless sorting-type (message "Sort %s: [a]lpha [n]umeric [p]riority p[r]operty todo[o]rder [f]unc [t]ime [s]cheduled [d]eadline [c]reated A/N/P/R/O/F/T/S/D/C means reversed:" what) (setq sorting-type (read-char-exclusive)) (and (= (downcase sorting-type) ?f) (setq getkey-func (org-icompleting-read "Sort using function: " obarray 'fboundp t nil nil)) (setq getkey-func (intern getkey-func))) (and (= (downcase sorting-type) ?r) (setq property (org-icompleting-read "Property: " (mapcar 'list (org-buffer-property-keys t)) nil t)))) (message "Sorting entries...") (save-restriction (narrow-to-region start end) (let ((dcst (downcase sorting-type)) (case-fold-search nil) (now (current-time))) (sort-subr (/= dcst sorting-type) ;; This function moves to the beginning character of the "record" to ;; be sorted. (lambda nil (if (re-search-forward re nil t) (goto-char (match-beginning 0)) (goto-char (point-max)))) ;; This function moves to the last character of the "record" being ;; sorted. (lambda nil (save-match-data (condition-case nil (outline-forward-same-level 1) (error (goto-char (point-max)))))) ;; This function returns the value that gets sorted against. (lambda nil (cond ((= dcst ?n) (if (looking-at org-complex-heading-regexp) (string-to-number (match-string 4)) nil)) ((= dcst ?a) (if (looking-at org-complex-heading-regexp) (funcall case-func (match-string 4)) nil)) ((= dcst ?t) (let ((end (save-excursion (outline-next-heading) (point)))) (if (or (re-search-forward org-ts-regexp end t) (re-search-forward org-ts-regexp-both end t)) (org-time-string-to-seconds (match-string 0)) (org-float-time now)))) ((= dcst ?c) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward (concat "^[ \t]*\\[" org-ts-regexp1 "\\]") end t) (org-time-string-to-seconds (match-string 0)) (org-float-time now)))) ((= dcst ?s) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward org-scheduled-time-regexp end t) (org-time-string-to-seconds (match-string 1)) (org-float-time now)))) ((= dcst ?d) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward org-deadline-time-regexp end t) (org-time-string-to-seconds (match-string 1)) (org-float-time now)))) ((= dcst ?p) (if (re-search-forward org-priority-regexp (point-at-eol) t) (string-to-char (match-string 2)) org-default-priority)) ((= dcst ?r) (or (org-entry-get nil property) "")) ((= dcst ?o) (if (looking-at org-complex-heading-regexp) (- 9999 (length (member (match-string 2) org-todo-keywords-1))))) ((= dcst ?f) (if getkey-func (progn (setq tmp (funcall getkey-func)) (if (stringp tmp) (setq tmp (funcall case-func tmp))) tmp) (error "Invalid key function `%s'" getkey-func))) (t (error "Invalid sorting type `%c'" sorting-type)))) nil (cond ((= dcst ?a) 'string<) ((= dcst ?f) compare-func) ((member dcst '(?p ?t ?s ?d ?c)) '<))))) (run-hooks 'org-after-sorting-entries-or-items-hook) ;; Reset the clock marker if needed (when cmstr (save-excursion (goto-char start) (search-forward cmstr nil t) (move-marker org-clock-marker (point)))) (message "Sorting entries...done"))) (defun org-do-sort (table what &optional with-case sorting-type) "Sort TABLE of WHAT according to SORTING-TYPE. The user will be prompted for the SORTING-TYPE if the call to this function does not specify it. WHAT is only for the prompt, to indicate what is being sorted. The sorting key will be extracted from the car of the elements of the table. If WITH-CASE is non-nil, the sorting will be case-sensitive." (unless sorting-type (message "Sort %s: [a]lphabetic, [n]umeric, [t]ime. A/N/T means reversed:" what) (setq sorting-type (read-char-exclusive))) (let ((dcst (downcase sorting-type)) extractfun comparefun) ;; Define the appropriate functions (cond ((= dcst ?n) (setq extractfun 'string-to-number comparefun (if (= dcst sorting-type) '< '>))) ((= dcst ?a) (setq extractfun (if with-case (lambda(x) (org-sort-remove-invisible x)) (lambda(x) (downcase (org-sort-remove-invisible x)))) comparefun (if (= dcst sorting-type) 'string< (lambda (a b) (and (not (string< a b)) (not (string= a b))))))) ((= dcst ?t) (setq extractfun (lambda (x) (if (or (string-match org-ts-regexp x) (string-match org-ts-regexp-both x)) (org-float-time (org-time-string-to-time (match-string 0 x))) 0)) comparefun (if (= dcst sorting-type) '< '>))) (t (error "Invalid sorting type `%c'" sorting-type))) (sort (mapcar (lambda (x) (cons (funcall extractfun (car x)) (cdr x))) table) (lambda (a b) (funcall comparefun (car a) (car b))))))

    Read the article

  • cron.daily not running at the time it should?

    - by Mariano Martinez Peck
    My /etc/cron.daily scripts seem to be executing far later from what I understand they should. I am in Ubuntu and anacron is installed. If I do a sudo cat /var/log/syslog | grep cron I get something like: Aug 23 01:17:01 mymachine CRON[25171]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 23 02:17:01 mymachine CRON[25588]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 23 03:17:01 mymachine CRON[26026]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 23 03:25:01 mymachine CRON[30320]: (root) CMD (test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily )) Aug 23 04:17:01 mymachine CRON[26363]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 23 05:17:01 mymachine CRON[26770]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 23 06:17:01 mymachine CRON[27168]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 23 07:17:01 mymachine CRON[27547]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 23 07:30:01 mymachine CRON[2249]: (root) CMD (start -q anacron || :) Aug 23 07:30:02 mymachine anacron[2252]: Anacron 2.3 started on 2014-08-23 Aug 23 07:30:02 mymachine anacron[2252]: Will run job `cron.daily' in 5 min. Aug 23 07:30:02 mymachine anacron[2252]: Jobs will be executed sequentially Aug 23 07:35:02 mymachine anacron[2252]: Job `cron.daily' started As you can see, at 3:25 it tried to do something. But the cron.daily execution started really at 7:35. My /etc/crontab is: # /etc/crontab: system-wide crontab # Unlike any other crontab you don't have to run the `crontab' # command to install the new version when you edit this file # and files in /etc/cron.d. These files also have username fields, # that none of the other crontabs do. SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin # m h dom mon dow user command 17 * * * * root cd / && run-parts --report /etc/cron.hourly 25 3 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ) 47 6 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly ) 52 6 1 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly ) # From what I understand, daily scripts are indeed for 3:25. My /etc/anacrontab is: # /etc/anacrontab: configuration file for anacron # See anacron(8) and anacrontab(5) for details. SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin HOME=/root LOGNAME=root # These replace cron's entries 1 5 cron.daily run-parts --report /etc/cron.daily 7 10 cron.weekly run-parts --report /etc/cron.weekly @monthly 15 cron.monthly run-parts --report /etc/cron.monthly So...does someone know why my cron started to do something at 3:25 but then really start the jobs at 7:35? Also..as you can see in the log, hourly jobs are being executed at correct time: hour and 17 minutes, which is exactly what I have in /etc/crontab Finally, from the logs, it seems my daily jobs are being actually run by anacron rather than cron? So cron finds nothing to run (at 3:25) and then anacron runs the jobs at 7:35? If true, how can I fix this? Thanks in advance,

    Read the article

  • Blank black screen with cursor after login -- RHEL5

    - by Sean O.
    I have a RHEL 5 machine here which is a Dell Precision T3500. I'm an Ubuntu guy, but I'm having a heck of a time with this machine. After processing its first security update, we cannot log in via the gdm greeter. A new kernel was installed; then I installed the nVidia drivers for our Quadro NVS 295. I know the X configuration is valid because the gdm greeter does display; however, upon login all we can get is a blank, black screen with a cursor. I thought perhaps our python installation was corrupted but a reinstall via yum has not helped. I have searched & googled extensively for a potential fix for this and can find nothing. Below are outputs from uname, a tail of an error in /var/log/messages, and the Xorg.conf. Can anyone suggest a course of action? [sean@cheetah ~]$ uname -a Linux cheetah.*.* 2.6.18-308.8.1.el5 #1 SMP Fri May 4 16:43:02 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux [sean@cheetah ~]$ sudo tail /var/log/messages Jun 5 15:03:04 cheetah gconfd (sean-4592): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Jun 5 15:03:05 cheetah hcid[3855]: Default passkey agent (:1.8, /org/bluez/applet) registered Jun 5 15:03:05 cheetah pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found Jun 5 15:03:05 cheetah last message repeated 2 times Jun 5 15:03:06 cheetah gconfd (sean-4592): Resolved address "xml:readwrite:/home/sean/.gconf" to a writable configuration source at position 0 Jun 5 15:03:06 cheetah setroubleshoot: [program.ERROR] exception ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Traceback (most recent call last): File "/usr/bin/sealert", line 952, in ? from setroubleshoot.gui_utils import * File "/usr/lib/python2.4/site-packages/setroubleshoot/gui_utils.py", line 26, in ? import gtk File "/usr/lib64/python2.4/site-packages/gtk-2.0/gtk/__init__.py", line 48, in ? from gtk import _gtk ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Jun 5 15:03:07 cheetah setroubleshoot: [program.ERROR] exception ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Traceback (most recent call last): File "/usr/bin/sealert", line 952, in ? from setroubleshoot.gui_utils import * File "/usr/lib/python2.4/site-packages/setroubleshoot/gui_utils.py", line 26, in ? import gtk File "/usr/lib64/python2.4/site-packages/gtk-2.0/gtk/__init__.py", line 48, in ? from gtk import _gtk ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Jun 5 15:03:08 cheetah pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found Jun 5 15:07:01 cheetah ntpd[4114]: synchronized to 64.16.211.38, stratum 3 Jun 5 15:07:01 cheetah ntpd[4114]: kernel time sync enabled 0001 [sean@cheetah ~]$ cat /etc/X11/xorg.conf # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 295.53 ([email protected]) Sat May 12 00:34:20 PDT 2012 # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "Monitor" ### Comment all HorizSync and VertSync values to use DDC: ### Comment all HorizSync and VertSync values to use DDC: Identifier "Monitor0" ModelName "LCD Panel 1600x1200" HorizSync 31.5 - 74.7 VertRefresh 56.0 - 65.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "nvidia" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • How do I get my ubuntu server to listen for database connections?

    - by Bob Flemming
    I am having a problems connecting to my database outside of phpmyadmin. Im pretty sure this is because my server isn't listening on port 3306. When I type: sudo netstat -ntlp on my OTHER working server I can see the following line: tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 20445/mysqld However, this line does not appear on the server I am having difficulty with. How do I make my sever listen for mysql connections? Here my my.conf file: # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp lc-messages-dir = /usr/share/mysql #skip-networking=off #skip_networking=off #skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 0.0.0.0 # # * Fine Tuning # key_buffer = 64M max_allowed_packet = 64M thread_stack = 650K thread_cache_size = 32 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 2M query_cache_size = 32M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error logging goes to syslog due to /etc/mysql/conf.d/mysqld_safe_syslog.cnf. # # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 32M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/

    Read the article

  • Improving TCP performance over a gigabit network with lots of connections and high traffic of small packets

    - by MinimeDJ
    I’m trying to improve my TCP throughput over a “gigabit network with lots of connections and high traffic of small packets”. My server OS is Ubuntu 11.10 Server 64bit. There are about 50.000 (and growing) clients connected to my server through TCP Sockets (all on the same port). 95% of of my packets have size of 1-150 bytes (TCP header and payload). The rest 5% vary from 150 up to 4096+ bytes. With the config below my server can handle traffic up to 30 Mbps (full duplex). Can you please advice best practice to tune OS for my needs? My /etc/sysctl.cong looks like this: kernel.pid_max = 1000000 net.ipv4.ip_local_port_range = 2500 65000 fs.file-max = 1000000 # net.core.netdev_max_backlog=3000 net.ipv4.tcp_sack=0 # net.core.rmem_max = 16777216 net.core.wmem_max = 16777216 net.core.somaxconn = 2048 # net.ipv4.tcp_rmem = 4096 87380 16777216 net.ipv4.tcp_wmem = 4096 65536 16777216 # net.ipv4.tcp_synack_retries = 2 net.ipv4.tcp_syncookies = 1 net.ipv4.tcp_mem = 50576 64768 98152 # net.core.wmem_default = 65536 net.core.rmem_default = 65536 net.ipv4.tcp_window_scaling=1 # net.ipv4.tcp_mem= 98304 131072 196608 # net.ipv4.tcp_timestamps = 0 net.ipv4.tcp_rfc1337 = 1 net.ipv4.ip_forward = 0 net.ipv4.tcp_congestion_control=cubic net.ipv4.tcp_tw_recycle = 0 net.ipv4.tcp_tw_reuse = 0 # net.ipv4.tcp_orphan_retries = 1 net.ipv4.tcp_fin_timeout = 25 net.ipv4.tcp_max_orphans = 8192 Here are my limits: $ ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 193045 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1000000 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 1000000 [ADDED] My NICs are the following: $ dmesg | grep Broad [ 2.473081] Broadcom NetXtreme II 5771x 10Gigabit Ethernet Driver bnx2x 1.62.12-0 (2011/03/20) [ 2.477808] bnx2x 0000:02:00.0: eth0: Broadcom NetXtreme II BCM57711E XGb (A0) PCI-E x4 5GHz (Gen2) found at mem fb000000, IRQ 28, node addr d8:d3:85:bd:23:08 [ 2.482556] bnx2x 0000:02:00.1: eth1: Broadcom NetXtreme II BCM57711E XGb (A0) PCI-E x4 5GHz (Gen2) found at mem fa000000, IRQ 40, node addr d8:d3:85:bd:23:0c [ADDED 2] ethtool -k eth0 Offload parameters for eth0: rx-checksumming: on tx-checksumming: on scatter-gather: on tcp-segmentation-offload: on udp-fragmentation-offload: off generic-segmentation-offload: on generic-receive-offload: on large-receive-offload: on rx-vlan-offload: on tx-vlan-offload: on ntuple-filters: off receive-hashing: off [ADDED 3] sudo ethtool -S eth0|grep -vw 0 NIC statistics: [1]: rx_bytes: 17521104292 [1]: rx_ucast_packets: 118326392 [1]: tx_bytes: 35351475694 [1]: tx_ucast_packets: 191723897 [2]: rx_bytes: 16569945203 [2]: rx_ucast_packets: 114055437 [2]: tx_bytes: 36748975961 [2]: tx_ucast_packets: 194800859 [3]: rx_bytes: 16222309010 [3]: rx_ucast_packets: 109397802 [3]: tx_bytes: 36034786682 [3]: tx_ucast_packets: 198238209 [4]: rx_bytes: 14884911384 [4]: rx_ucast_packets: 104081414 [4]: rx_discards: 5828 [4]: rx_csum_offload_errors: 1 [4]: tx_bytes: 35663361789 [4]: tx_ucast_packets: 194024824 [5]: rx_bytes: 16465075461 [5]: rx_ucast_packets: 110637200 [5]: tx_bytes: 43720432434 [5]: tx_ucast_packets: 202041894 [6]: rx_bytes: 16788706505 [6]: rx_ucast_packets: 113123182 [6]: tx_bytes: 38443961940 [6]: tx_ucast_packets: 202415075 [7]: rx_bytes: 16287423304 [7]: rx_ucast_packets: 110369475 [7]: rx_csum_offload_errors: 1 [7]: tx_bytes: 35104168638 [7]: tx_ucast_packets: 184905201 [8]: rx_bytes: 12689721791 [8]: rx_ucast_packets: 87616037 [8]: rx_discards: 2638 [8]: tx_bytes: 36133395431 [8]: tx_ucast_packets: 196547264 [9]: rx_bytes: 15007548011 [9]: rx_ucast_packets: 98183525 [9]: rx_csum_offload_errors: 1 [9]: tx_bytes: 34871314517 [9]: tx_ucast_packets: 188532637 [9]: tx_mcast_packets: 12 [10]: rx_bytes: 12112044826 [10]: rx_ucast_packets: 84335465 [10]: rx_discards: 2494 [10]: tx_bytes: 36562151913 [10]: tx_ucast_packets: 195658548 [11]: rx_bytes: 12873153712 [11]: rx_ucast_packets: 89305791 [11]: rx_discards: 2990 [11]: tx_bytes: 36348541675 [11]: tx_ucast_packets: 194155226 [12]: rx_bytes: 12768100958 [12]: rx_ucast_packets: 89350917 [12]: rx_discards: 2667 [12]: tx_bytes: 35730240389 [12]: tx_ucast_packets: 192254480 [13]: rx_bytes: 14533227468 [13]: rx_ucast_packets: 98139795 [13]: tx_bytes: 35954232494 [13]: tx_ucast_packets: 194573612 [13]: tx_bcast_packets: 2 [14]: rx_bytes: 13258647069 [14]: rx_ucast_packets: 92856762 [14]: rx_discards: 3509 [14]: rx_csum_offload_errors: 1 [14]: tx_bytes: 35663586641 [14]: tx_ucast_packets: 189661305 rx_bytes: 226125043936 rx_ucast_packets: 1536428109 rx_bcast_packets: 351 rx_discards: 20126 rx_filtered_packets: 8694 rx_csum_offload_errors: 11 tx_bytes: 548442367057 tx_ucast_packets: 2915571846 tx_mcast_packets: 12 tx_bcast_packets: 2 tx_64_byte_packets: 35417154 tx_65_to_127_byte_packets: 2006984660 tx_128_to_255_byte_packets: 373733514 tx_256_to_511_byte_packets: 378121090 tx_512_to_1023_byte_packets: 77643490 tx_1024_to_1522_byte_packets: 43669214 tx_pause_frames: 228 Some info about SACK: When to turn TCP SACK off?

    Read the article

  • Making sense of S.M.A.R.T

    - by James
    First of all, I think everyone knows that hard drives fail a lot more than the manufacturers would like to admit. Google did a study that indicates that certain raw data attributes that the S.M.A.R.T status of hard drives reports can have a strong correlation with the future failure of the drive. We find, for example, that after their first scan error, drives are 39 times more likely to fail within 60 days than drives with no such errors. First errors in re- allocations, offline reallocations, and probational counts are also strongly correlated to higher failure probabil- ities. Despite those strong correlations, we find that failure prediction models based on SMART parameters alone are likely to be severely limited in their prediction accuracy, given that a large fraction of our failed drives have shown no SMART error signals whatsoever. Seagate seems like it is trying to obscure this information about their drives by claiming that only their software can accurately determine the accurate status of their drive and by the way their software will not tell you the raw data values for the S.M.A.R.T attributes. Western digital has made no such claim to my knowledge but their status reporting tool does not appear to report raw data values either. I've been using HDtune and smartctl from smartmontools in order to gather the raw data values for each attribute. I've found that indeed... I am comparing apples to oranges when it comes to certain attributes. I've found for example that most Seagate drives will report that they have many millions of read errors while western digital 99% of the time shows 0 for read errors. I've also found that Seagate will report many millions of seek errors while Western Digital always seems to report 0. Now for my question. How do I normalize this data? Is Seagate producing millions of errors while Western digital is producing none? Wikipedia's article on S.M.A.R.T status says that manufacturers have different ways of reporting this data. Here is my hypothesis: I think I found a way to normalize (is that the right term?) the data. Seagate drives have an additional attribute that Western Digital drives do not have (Hardware ECC Recovered). When you subtract the Read error count from the ECC Recovered count, you'll probably end up with 0. This seems to be equivalent to Western Digitals reported "Read Error" count. This means that Western Digital only reports read errors that it cannot correct while Seagate counts up all read errors and tells you how many of those it was able to fix. I had a Seagate drive where the ECC Recovered count was less than the Read error count and I noticed that many of my files were becoming corrupt. This is how I came up with my hypothesis. The millions of seek errors that Seagate produces are still a mystery to me. Please confirm or correct my hypothesis if you have additional information. Here is the smart status of my western digital drive just so you can see what I'm talking about: james@ubuntu:~$ sudo smartctl -a /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD1001FALS-00E3A0 Serial Number: WD-WCATR0258512 Firmware Version: 05.01D05 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Jun 10 19:52:28 2010 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 179 175 021 Pre-fail Always - 4033 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 270 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 1468 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 262 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 46 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 223 194 Temperature_Celsius 0x0022 105 102 000 Old_age Always - 42 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0

    Read the article

  • Vagrant (Virtualbox) host-only multiple node networking issue

    - by Lorin Hochstein
    I'm trying to use a multi-VM vagrant environment as a testbed for deploying OpenStack, and I've run into a networking problem with trying to communicate from one VM, to a VM-inside-of-a-VM. I have two Vagrant nodes, a cloud controller node and a compute node. I'm using host-only networking. My Vagrantfile looks like this: Vagrant::Config.run do |config| config.vm.box = "precise64" config.vm.define :controller do |controller_config| controller_config.vm.network :hostonly, "192.168.206.130" # eth1 controller_config.vm.network :hostonly, "192.168.100.130" # eth2 controller_config.vm.host_name = "controller" end config.vm.define :compute1 do |compute1_config| compute1_config.vm.network :hostonly, "192.168.206.131" # eth1 compute1_config.vm.network :hostonly, "192.168.100.131" # eth2 compute1_config.vm.host_name = "compute1" compute1_config.vm.customize ["modifyvm", :id, "--memory", 1024] end end When I try to start up a (QEMU-based) VM, it boots successfully on compute1, and its virtual nic (vnet0) is connected via a bridge, br100: root@compute1:~# brctl show 100 bridge name bridge id STP enabled interfaces br100 8000.08002798c6ef no eth2 vnet0 When the QEMU VM makes a request to the DHCP server (dnsmasq) running on controller, I can see the request reaches the controller because of the output on the syslog on the controller: Aug 6 02:34:56 precise64 dnsmasq-dhcp[12042]: DHCPDISCOVER(br100) fa:16:3e:07:98:11 Aug 6 02:34:56 precise64 dnsmasq-dhcp[12042]: DHCPOFFER(br100) 192.168.100.2 fa:16:3e:07:98:11 However, the DHCPOFFER never makes it back to the VM running on compute1. If I watch the requests using tcpdump on the vboxnet3 interface on my host machine that runs Vagrant (Mac OS X), I can see both the requests and the replies $ sudo tcpdump -i vboxnet3 -n port 67 or port 68 tcpdump: WARNING: vboxnet3: That device doesn't support promiscuous mode (BIOCPROMISC: Operation not supported on socket) tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on vboxnet3, link-type EN10MB (Ethernet), capture size 65535 bytes 22:51:20.694040 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:07:98:11, length 280 22:51:20.694057 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:07:98:11, length 280 22:51:20.696047 IP 192.168.100.1.67 > 192.168.100.2.68: BOOTP/DHCP, Reply, length 311 22:51:23.700845 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:07:98:11, length 280 22:51:23.700876 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:07:98:11, length 280 22:51:23.701591 IP 192.168.100.1.67 > 192.168.100.2.68: BOOTP/DHCP, Reply, length 311 22:51:26.705978 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:07:98:11, length 280 22:51:26.705995 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:07:98:11, length 280 22:51:26.706527 IP 192.168.100.1.67 > 192.168.100.2.68: BOOTP/DHCP, Reply, length 311 But, if I tcpdump on eth2 on compute, I only see the requests, not the replies: root@compute1:~# tcpdump -i eth2 -n port 67 or port 68 tcpdump: WARNING: eth2: no IPv4 address assigned tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth2, link-type EN10MB (Ethernet), capture size 65535 bytes 02:51:20.240672 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:07:98:11, length 280 02:51:23.249758 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:07:98:11, length 280 02:51:26.258281 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:07:98:11, length 280 At this point, I'm stuck. I'm not sure why the DHCP replies aren't making it to the compute node. Perhaps it has something to do with the configuration of the VirtualBox virtual switch/router? Note that eth2 interfaces on both nodes have been set to promiscuous mode.

    Read the article

  • the font of xubuntu

    - by ubuntu
    HI: How to set the default font for different language in the xubuntu? For example, I am using xubuntu9.10(English release),and I do not like the default English and Chinese font. I have tried to use "Application-setting-appearance-fonts" to edit the default font,however it just work for the English. The default font of Chinese is "WenQuanYi Zen Hei". I do not like it. I want to use "Microsoft YaHei", I copy this file from my Win7 system. And I tried remove the "WenQuanYi Zen Hei" by "sudo aptitude remove ttf-wqy",it show me it is successfully removed. Also I have modify the file: /etc/fonts/conf.avail/69-language-selector-zh-cn.conf to: <fontconfig> <match target="pattern"> <test qual="any" name="family"> <string>serif</string> </test> <edit name="family" mode="prepend" binding="strong"> <string>Microsoft YaHei</string> <string>AR PL UMing CN</string> <string>AR PL ShanHeiSun Uni</string> <string>Bitstream Vera Serif</string> <string>DejaVu Serif</string> <string>AR PL UKai CN</string> <string>AR PL ZenKai Uni</string> </edit> </match> <match target="pattern"> <test qual="any" name="family"> <string>sans-serif</string> </test> <edit name="family" mode="prepend" binding="strong"> <string>Bitstream Vera Sans</string> <string>Microsoft YaHei</string> <string>DejaVu Sans</string> <string>AR PL UMing CN</string> <string>AR PL ShanHeiSun Uni</string> <string>AR PL UKai CN</string> <string>AR PL ZenKai Uni</string> </edit> </match> <match target="pattern"> <test qual="any" name="family"> <string>monospace</string> </test> <edit name="family" mode="prepend" binding="strong"> <string>Bitstream Vera Sans Mono</string> <string>Microsoft YaHei</string> <string>DejaVu Sans Mono</string> <string>AR PL UMing CN</string> <string>AR PL ShanHeiSun Uni</string> <string>AR PL UKai CN</string> <string>AR PL ZenKai Uni</string> </edit> </match> </fontconfig> However when I use the firefox, I found the title of the firefox window is not YaHei. See the image here So what is the problem?

    Read the article

  • the font of xubuntu

    - by ubuntu
    HI: How to set the default font for different language in the xubuntu? For example, I am using xubuntu9.10(English release),and I do not like the default English and Chinese font. I have tried to use "Application-setting-appearance-fonts" to edit the default font,however it just work for the English. The default font of Chinese is "WenQuanYi Zen Hei". I do not like it. I want to use "Microsoft YaHei", I copy this file from my Win7 system. And I tried remove the "WenQuanYi Zen Hei" by "sudo aptitude remove ttf-wqy",it show me it is successfully removed. Also I have modify the file: /etc/fonts/conf.avail/69-language-selector-zh-cn.conf to: <fontconfig> <match target="pattern"> <test qual="any" name="family"> <string>serif</string> </test> <edit name="family" mode="prepend" binding="strong"> <string>Microsoft YaHei</string> <string>AR PL UMing CN</string> <string>AR PL ShanHeiSun Uni</string> <string>Bitstream Vera Serif</string> <string>DejaVu Serif</string> <string>AR PL UKai CN</string> <string>AR PL ZenKai Uni</string> </edit> </match> <match target="pattern"> <test qual="any" name="family"> <string>sans-serif</string> </test> <edit name="family" mode="prepend" binding="strong"> <string>Bitstream Vera Sans</string> <string>Microsoft YaHei</string> <string>DejaVu Sans</string> <string>AR PL UMing CN</string> <string>AR PL ShanHeiSun Uni</string> <string>AR PL UKai CN</string> <string>AR PL ZenKai Uni</string> </edit> </match> <match target="pattern"> <test qual="any" name="family"> <string>monospace</string> </test> <edit name="family" mode="prepend" binding="strong"> <string>Bitstream Vera Sans Mono</string> <string>Microsoft YaHei</string> <string>DejaVu Sans Mono</string> <string>AR PL UMing CN</string> <string>AR PL ShanHeiSun Uni</string> <string>AR PL UKai CN</string> <string>AR PL ZenKai Uni</string> </edit> </match> </fontconfig> However when I use the firefox, I found the title of the firefox window is not YaHei. See the image here So what is the problem?

    Read the article

  • the font of xubuntu

    - by ubuntu
    HI: How to set the default font for different language in the xubuntu? For example, I am using xubuntu9.10(English release),and I do not like the default English and Chinese font. I have tried to use "Application-setting-appearance-fonts" to edit the default font,however it just work for the English. The default font of Chinese is "WenQuanYi Zen Hei". I do not like it. I want to use "Microsoft YaHei", I copy this file from my Win7 system. And I tried remove the "WenQuanYi Zen Hei" by "sudo aptitude remove ttf-wqy",it show me it is successfully removed. Also I have modify the file: /etc/fonts/conf.avail/69-language-selector-zh-cn.conf to: <fontconfig> <match target="pattern"> <test qual="any" name="family"> <string>serif</string> </test> <edit name="family" mode="prepend" binding="strong"> <string>Microsoft YaHei</string> <string>AR PL UMing CN</string> <string>AR PL ShanHeiSun Uni</string> <string>Bitstream Vera Serif</string> <string>DejaVu Serif</string> <string>AR PL UKai CN</string> <string>AR PL ZenKai Uni</string> </edit> </match> <match target="pattern"> <test qual="any" name="family"> <string>sans-serif</string> </test> <edit name="family" mode="prepend" binding="strong"> <string>Bitstream Vera Sans</string> <string>Microsoft YaHei</string> <string>DejaVu Sans</string> <string>AR PL UMing CN</string> <string>AR PL ShanHeiSun Uni</string> <string>AR PL UKai CN</string> <string>AR PL ZenKai Uni</string> </edit> </match> <match target="pattern"> <test qual="any" name="family"> <string>monospace</string> </test> <edit name="family" mode="prepend" binding="strong"> <string>Bitstream Vera Sans Mono</string> <string>Microsoft YaHei</string> <string>DejaVu Sans Mono</string> <string>AR PL UMing CN</string> <string>AR PL ShanHeiSun Uni</string> <string>AR PL UKai CN</string> <string>AR PL ZenKai Uni</string> </edit> </match> </fontconfig> However when I use the firefox, I found the title of the firefox window is not YaHei. See the image here So what is the problem?

    Read the article

  • What would make a noise in a PC on graphics operations on a passively-cooled system?

    - by T.J. Crowder
    I have this system based on the Intel D510MO motherboard, which is basically an Atom D510 (dual-core HT Atom w/built-in GPU), an Intel NM10 chipset, and a Realtek Gigabit LAN controller. It's entirely passively cooled. I noticed almost immediately that there was a kind of very, very soft noise that corresponded with graphics operations, sort of the noise you'd get if you had a sheet of flat paper and slid something really light across it — but more electronic than that. I wrote it off as observation error and/or disk activity triggered by the graphics operation (although the latter seemed like a lot of unnecessary disk activity). It isn't. I got curious enough that I finally did a few controlled experiments, and here's what I've determined: It isn't the HDD. For one thing, the sounds the HDD makes (when seeking, when reading or writing, when just sitting there spinning) is different. For another, I used sudo hdparm -y /dev/sda (I'm using Ubuntu 10.04 LTS) to temporarily put the disk on standby while making sure that non-disk graphics op was happening in a loop. The disk spun down, but the other sound continued, corresponding perfectly with the timing of the graphics op. (Then the disk spun up again, but it takes long enough that I could rule out the HDD.) It isn't the monitor; I ensured the two were well physically-separated and the sound was definitely coming from the main box. It isn't something else in the room; the sound is coming from the box. It isn't cross-talk to an audio circuit coming out the speakers. (It doesn't have any speakers.) It isn't my mouse (e.g., when I'm trying to make graphics ops happen); the sound happens if I set up a recurring operation and don't use the mouse at all, or if I lift the mouse off the table slightly (but enough that the laser still registers movement). It isn't the voices in my head; they never whisper like that. Other observations: It doesn't seem to matter what the graphics operation is; anything that changes what's on the screen seems to do it. I get the sound when moving the mouse over the Chromium tab bar (which makes the tab backgrounds change); I get it when a web page has a counter on it that changes the text on the page: I get it when dragging window contents around. The sound is very, very slightly louder if the graphics op is larger, like scrolling a text area when writing a question on superuser.com, than for smaller operations like the tick counter on the web page. But it's very slight. It's fairly loud (and of good duration) when the op involves color changes to substantial surface areas. For instance, when asking a question here on superuser and you move the cursor between the question box and the tag box, and the help to the right fades out, changes, and fades back in. (Yet another example related to the web browser, so let me say: I hear it when operations completely unrelated to the web browser as well.) It doesn't sound like arcing or anything like that (I'd've shut off the machine Right Quick Like if it did). Moving windows does it. Scrolling windows (by and large) doesn't. I have the feeling I've heard this sort of thing before, when all system fans were on low and such, with other systems — but (again) written it off as observational error. For all the world it's like I'm hearing the CPU working (as opposed to the GPU; note the window scroll thing above) or data being transferred somewhere, but that just seems...unlikely. So what am I hearing? This may seem like a very localized question, but perhaps other silent PC enthusiasts may be interested as well...

    Read the article

  • ls hangs for a certain directory

    - by Jakobud
    There is a particular directory (/var/www), that when I run ls (with or without some options), the command hangs and never completes. There is only about 10-15 files and directories in /var/www. Mostly just text files. Here is some investigative info: [me@server www]$ df . Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_dev-lv_root 50G 19G 29G 40% / [me@server www]$ df -i . Filesystem Inodes IUsed IFree IUse% Mounted on /dev/mapper/vg_dev-lv_root 3.2M 435K 2.8M 14% / find works fine. Also I can type in cd /var/www/ and press TAB before pressing enter and it will successfully tab-completion list of all files/directories in there: [me@server www]$ cd /var/www/ cgi-bin/ create_vhost.sh html/ manual/ phpMyAdmin/ scripts/ usage/ conf/ error/ icons/ mediawiki/ rackspace sqlbuddy/ vhosts/ [me@server www]$ cd /var/www/ I have had to kill my terminal sessions several times because of the ls hanging: [me@server ~]$ ps | grep ls gdm 6215 0.0 0.0 488152 2488 ? S<sl Jan18 0:00 /usr/bin/pulseaudio --start --log-target=syslog root 23269 0.0 0.0 117724 1088 ? D 18:24 0:00 ls -Fh --color=always -l root 23477 0.0 0.0 117724 1088 ? D 18:34 0:00 ls -Fh --color=always -l root 23579 0.0 0.0 115592 820 ? D 18:36 0:00 ls -Fh --color=always root 23634 0.0 0.0 115592 816 ? D 18:38 0:00 ls -Fh --color=always root 23740 0.0 0.0 117724 1088 ? D 18:40 0:00 ls -Fh --color=always -l me 23770 0.0 0.0 103156 816 pts/6 S+ 18:41 0:00 grep ls kill doesn't seem to have any affect on the processes, even as sudo. What else should I do to investigate this problem? It just randomly started happening today. UPDATE dmesg is a big list of things, mostly related to an external USB HDD that I've mounted too many times and the max mount count has been reached, but that is an un-related problem I think. Near the bottom of dmesg I'm seeing this: INFO: task ls:23579 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. ls D ffff88041fc230c0 0 23579 23505 0x00000080 ffff8801688a1bb8 0000000000000086 0000000000000000 ffffffff8119d279 ffff880406d0ea20 ffff88007e2c2268 ffff880071fe80c8 00000003ae82967a ffff880407169ad8 ffff8801688a1fd8 0000000000010518 ffff880407169ad8 Call Trace: [<ffffffff8119d279>] ? __find_get_block+0xa9/0x200 [<ffffffff814c97ae>] __mutex_lock_slowpath+0x13e/0x180 [<ffffffff814c964b>] mutex_lock+0x2b/0x50 [<ffffffff8117a4d3>] do_lookup+0xd3/0x220 [<ffffffff8117b145>] __link_path_walk+0x6f5/0x1040 [<ffffffff8117a47d>] ? do_lookup+0x7d/0x220 [<ffffffff8117bd1a>] path_walk+0x6a/0xe0 [<ffffffff8117beeb>] do_path_lookup+0x5b/0xa0 [<ffffffff8117cb57>] user_path_at+0x57/0xa0 [<ffffffff81178986>] ? generic_readlink+0x76/0xc0 [<ffffffff8117cb62>] ? user_path_at+0x62/0xa0 [<ffffffff81171d3c>] vfs_fstatat+0x3c/0x80 [<ffffffff81258ae5>] ? _atomic_dec_and_lock+0x55/0x80 [<ffffffff81171eab>] vfs_stat+0x1b/0x20 [<ffffffff81171ed4>] sys_newstat+0x24/0x50 [<ffffffff810d40a2>] ? audit_syscall_entry+0x272/0x2a0 [<ffffffff81013172>] system_call_fastpath+0x16/0x1b And also, strace ls /var/www/ spits out a whole BUNCH of information. I don't know what is useful here... The last handful of lines: ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(1, TIOCGWINSZ, {ws_row=68, ws_col=145, ws_xpixel=0, ws_ypixel=0}) = 0 stat("/var/www/", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 open("/var/www/", O_RDONLY|O_NONBLOCK|O_DIRECTORY|O_CLOEXEC) = 3 fcntl(3, F_GETFD) = 0x1 (flags FD_CLOEXEC) getdents(3, /* 16 entries */, 32768) = 488 getdents(3, /* 0 entries */, 32768) = 0 close(3) = 0 fstat(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 9), ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f3093b18000 write(1, "cgi-bin conf create_vhost.sh\te"..., 125cgi-bin conf create_vhost.sh error html icons manual mediawiki phpMyAdmin rackspace scripts sqlbuddy usage vhosts ) = 125 close(1) = 0 munmap(0x7f3093b18000, 4096) = 0 close(2) = 0 exit_group(0) = ?

    Read the article

  • Raid 1 array won't assemble after power outage. How do I fix this ext4 mirror?

    - by Forkrul Assail
    Two ext4 drives on Raid 1 with mdadm won't reassemble after the power went out for an extended period (UPS drained). After turning the machine back on, mdadm said that the array was degraded, after which it took about 2 days for a full resync, which completed without problems. On trying to remount the array I get: mount: you must specify the filesystem type cat /etc/fstab lines relevant to setup: /dev/md127 /media/mediapool ext4 defaults 0 0 dmesg | tail (on trying to mount) says: [ 1050.818782] EXT3-fs (md127): error: can't find ext3 filesystem on dev md127. [ 1050.849214] EXT4-fs (md127): VFS: Can't find ext4 filesystem [ 1050.944781] FAT-fs (md127): invalid media value (0x00) [ 1050.944782] FAT-fs (md127): Can't find a valid FAT filesystem [ 1058.272787] EXT2-fs (md127): error: can't find an ext2 filesystem on dev md127. cat /proc/mdstat says: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md127 : active (auto-read-only) raid1 sdj[2] sdi[0] 2930135360 blocks super 1.2 [2/2] [UU] unused devices: <none> fsck /dev/md127 says: fsck from util-linux 2.20.1 e2fsck 1.42 (29-Nov-2011) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/md127 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> mdadm -E /dev/sdi gives me: /dev/sdi: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 37ac1824:eb8a21f6:bd5afd6d:96da6394 Name : sojourn:33 Creation Time : Sat Nov 10 10:43:52 2012 Raid Level : raid1 Raid Devices : 2 Avail Dev Size : 5860271016 (2794.40 GiB 3000.46 GB) Array Size : 2930135360 (2794.39 GiB 3000.46 GB) Used Dev Size : 5860270720 (2794.39 GiB 3000.46 GB) Data Offset : 262144 sectors Super Offset : 8 sectors State : clean Device UUID : 3e6e9a4f:6c07ab3d:22d47fce:13cecfd0 Update Time : Tue Nov 13 20:34:18 2012 Checksum : f7d10db9 - correct Events : 27 Device Role : Active device 0 Array State : AA ('A' == active, '.' == missing) boot@boot ~ $ sudo mdadm -E /dev/sdj /dev/sdj: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 37ac1824:eb8a21f6:bd5afd6d:96da6394 Name : sojourn:33 Creation Time : Sat Nov 10 10:43:52 2012 Raid Level : raid1 Raid Devices : 2 Avail Dev Size : 5860271016 (2794.40 GiB 3000.46 GB) Array Size : 2930135360 (2794.39 GiB 3000.46 GB) Used Dev Size : 5860270720 (2794.39 GiB 3000.46 GB) Data Offset : 262144 sectors Super Offset : 8 sectors State : clean Device UUID : 7fb84af4:e9295f7b:ede61f27:bec0cb57 Update Time : Tue Nov 13 20:34:18 2012 Checksum : b9d17fef - correct Events : 27 Device Role : Active device 1 Array State : AA ('A' == active, '.' == missing) machine@user ~ dmesg | tail [ 61.785866] init: alsa-restore main process (2736) terminated with status 99 [ 68.433548] eth0: no IPv6 routers present [ 534.142511] EXT4-fs (sdi): ext4_check_descriptors: Block bitmap for group 0 not in group (block 2838187772)! [ 534.142518] EXT4-fs (sdi): group descriptors corrupted! [ 546.418780] EXT2-fs (sdi): error: couldn't mount because of unsupported optional features (240) [ 549.654127] EXT3-fs (sdi): error: couldn't mount because of unsupported optional features (240) Since this is Raid 1 it was suggested that I try and mount or fsck the drives separately. After a long fsck on one drive, it ended with this as tail: Illegal double indirect block (2298566437) in inode 39717736. CLEARED. Illegal block #4231180 (2611866932) in inode 39717736. CLEARED. Error storing directory block information (inode=39717736, block=0, num=1092368): Memory allocation failed Recreate journal? yes Creating journal (32768 blocks): Done. *** journal has been re-created - filesystem is now ext3 again *** The drive however still doesn't want to mount: dmesg | tail [ 170.674659] md: export_rdev(sdc) [ 170.675152] md: export_rdev(sdc) [ 195.275288] md: export_rdev(sdc) [ 195.275876] md: export_rdev(sdc) [ 1338.540092] CE: hpet increased min_delta_ns to 30169 nsec [26125.734105] EXT4-fs (sdc): ext4_check_descriptors: Checksum for group 0 failed (43502!=37987) [26125.734115] EXT4-fs (sdc): group descriptors corrupted! [26182.325371] EXT3-fs (sdc): error: couldn't mount because of unsupported optional features (240) [27083.316519] EXT4-fs (sdc): ext4_check_descriptors: Checksum for group 0 failed (43502!=37987) [27083.316530] EXT4-fs (sdc): group descriptors corrupted! Please help me fix this. I never in my wildest nightmares thought a complete mirror would die this badly. Am I missing something? Suggestions on fixing this? Could someone explain why it would resync after the powerout, only to seemingly nuke the drive? Thanks for reading. Any help much appreciated. I've tried everything I can think of, including booting and filesystem checking with SystemRescue and Ubuntu liveboot discs.

    Read the article

  • Linux Kernel not passing through multicast UDP packets

    - by buecking
    Recently I've set up a new Ubuntu Server 10.04 and noticed my UDP server is no longer able to see any multicast data sent to the interface, even after joining the multicast group. I've got the exact same set up on two other Ubuntu 8.04.4 LTS machines and there is no problem receiving data after joining the same multicast group. The ethernet card is a Broadcom netXtreme II BCM5709 and the driver used is: b $ ethtool -i eth1 driver: bnx2 version: 2.0.2 firmware-version: 5.0.11 NCSI 2.0.5 bus-info: 0000:01:00.1 I'm using smcroute to manage my multicast registrations. b$ smcroute -d b$ smcroute -j eth1 233.37.54.71 After joining the group ip maddr shows the newly added registration. b$ ip maddr 1: lo inet 224.0.0.1 inet6 ff02::1 2: eth0 link 33:33:ff:40:c6:ad link 01:00:5e:00:00:01 link 33:33:00:00:00:01 inet 224.0.0.1 inet6 ff02::1:ff40:c6ad inet6 ff02::1 3: eth1 link 01:00:5e:25:36:47 link 01:00:5e:25:36:3e link 01:00:5e:25:36:3d link 33:33:ff:40:c6:af link 01:00:5e:00:00:01 link 33:33:00:00:00:01 inet 233.37.54.71 <------- McastGroup. inet 224.0.0.1 inet6 ff02::1:ff40:c6af inet6 ff02::1 So far so good, I can see that I'm receiving data for this multicast group. b$ sudo tcpdump -i eth1 -s 65534 host 233.37.54.71 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 65534 bytes 09:30:09.924337 IP 192.164.1.120.58848 > 233.37.54.71.15572: UDP, length 212 09:30:09.947547 IP 192.164.1.120.58848 > 233.37.54.71.15572: UDP, length 212 09:30:10.108378 IP 192.164.1.120.58866 > 233.37.54.71.15574: UDP, length 268 09:30:10.196841 IP 192.164.1.120.58848 > 233.37.54.71.15572: UDP, length 212 ... I can also confirm that the interface is receiving mcast packets. b $ ethtool -S eth1 | grep mcast_pack rx_mcast_packets: 103998 tx_mcast_packets: 33 Now here's the problem. When I try to capture the traffic using a simple ruby UDP server I receive zero data! Here's a simple server that reads data send on port 15572 and prints the first two characters. This works on the two 8.04.4 Ubuntu Servers, but not the 10.04 server. require 'socket' s = UDPSocket.new s.bind("", 15572) 5.times do text, sender = s.recvfrom(2) puts text end If I send a UDP packet crafted in ruby to localhost, the server receives it and prints out the first two characters. So I know that the server above is working correctly. irb(main):001:0> require 'socket' => true irb(main):002:0> s = UDPSocket.new => #<UDPSocket:0x7f3ccd6615f0> irb(main):003:0> s.send("I2 XXX", 0, 'localhost', 15572) When I check the protocol statistics I see that InMcastPkts is not increasing. While on the other 8.04 servers, on the same network, received a few thousands packets in 10 seconds. b $ netstat -sgu ; sleep 10 ; netstat -sgu IcmpMsg: InType3: 11 OutType3: 11 Udp: 446 packets received 4 packets to unknown port received. 0 packet receive errors 461 packets sent UdpLite: IpExt: InMcastPkts: 4654 <--------- Same as below OutMcastPkts: 3426 InBcastPkts: 9854 InOctets: -1691733021 OutOctets: 51187936 InMcastOctets: 145207 OutMcastOctets: 109680 InBcastOctets: 1246341 IcmpMsg: InType3: 11 OutType3: 11 Udp: 446 packets received 4 packets to unknown port received. 0 packet receive errors 461 packets sent UdpLite: IpExt: InMcastPkts: 4656 <-------------- Same as above OutMcastPkts: 3427 InBcastPkts: 9854 InOctets: -1690886265 OutOctets: 51188788 InMcastOctets: 145267 OutMcastOctets: 109712 InBcastOctets: 1246341 If I try forcing the interface into promisc mode nothing changes. At this point I'm stuck. I've confirmed the kernel config has multicast enabled. Perhaps there are other config options I should be checking? b $ grep CONFIG_IP_MULTICAST /boot/config-2.6.32-23-server CONFIG_IP_MULTICAST=y Any thoughts on where to go from here?

    Read the article

  • Alternative Methods of Sharing Folders in Windows?

    - by Blaenk
    Hey guys. I'm running Windows 7 and as of now I simply share folders as one usually does in Windows. I then have a MacBook with Leopard (Now Snow Leopard) which I use to connect to my computer to mount the shares by going to Finder, then CMD + K and typing smb://BlaenkPC (The name of my PC) into the address box. This consequently connects to my computer and mounts all of the shares. The problem is that sometimes, if for example I close my MacBook (Which makes it go to sleep) or sometimes even without doing that, the connection somehow drops. Sometimes I close the MacBook and upon re-opening it, everything still works; it's random. It still shows the computer as being connected, but it just shows 'loading' indefinitely. If I hit 'eject' with the intention of re-connecting to the computer, it disappears from the sidebar (The Computer Icon) in Finder, but I cannot re-connect. Activity Monitor (or ps aux, whichever) both show hung instances of umount; one for each share that was mounted. I cannot kill these processes with kill or killall (Yes, even with sudo, and sending signal -9). This has happened to me before, and here is another person who has experienced this. My question boils down to this: Is there an alternative method of sharing folders in Windows, that my Mac can read/understand, that is possibly more reliable and preferably just as fast? I usually use the mounted shares to watch television episodes off my computer, or movies, etc. (In other words, I open them in VLC and they automatically stream from my computer). As far as I can tell, this is a problem with the Samba protocol. I have heard of NFS, but I am not sure if I would have to re-format my drives, or what. I don't mind running a service or daemon to allow the sharing of the folders, I just want it to be done and hopefully in a better way than typical Windows shares through Samba. Usually when I encounter this problem, which is often (read: every day), I have no other option but to restart the MacBook. As I stated in the first question I linked to, shutting down and restarting don't work; I have to manually force the shutdown by holding the power button. I have not modified my installation of Mac OS X in any hackish way, so I doubt it's something with the Operating System, but worst come to worst, I might end up reformatting and doing a clean install to see if that fixes anything, as I am at a complete loss as to what may be causing the problem, and no one else seems to have any idea or care, despite there being quite a few people suffering from this problem, as my research has shown. Any pieces of information that can help are extremely appreciated. You don't have to answer every question on here, but maybe even some insight as to why it might not be possible to kill those hung umount instances for example, or why I may not be able to reconnect using samba (Is it something regarding the way the protocol works?). One thing to note is that I have another computer in the home network that doesn't seem to have this problem. However, it is also running Windows 7 (Note though that I am not using the homegroup feature, but the typical windows sharing feature). My only deduction is that the problem is being caused by the way the Mac (Or Samba implementation, whichever) is handling things. Perhaps it is a limitation.

    Read the article

  • puma init.d for centos 6 fails with runuser: user /var/log/puma.log does not exist

    - by Rubytastic
    Trying to get a init.d/puma to work on Centos 6. It throws error runuser: user /var/log/puma.log does not exist I run this from the /srv/books/current folder but it fails. I tried to debug the values but not quite get what is missing and why it throws this error. #! /bin/sh # puma - this script starts and stops the puma daemon # # chkconfig: - 85 15 # description: Puma # processname: puma # config: /etc/puma.conf # pidfile: /srv/books/current/tmp/pids/puma.pid # Author: Darío Javier Cravero &lt;[email protected]> # # Do NOT "set -e" # Original script https://github.com/puma/puma/blob/master/tools/jungle/puma # It was modified here by Stanislaw Pankevich <[email protected]> # to run on CentOS 5.5 boxes. # Script works perfectly on CentOS 5: script uses its native daemon(). # Puma is being stopped/restarted by sending signals, control app is not used. # Source function library. . /etc/rc.d/init.d/functions # Source networking configuration. . /etc/sysconfig/network # Check that networking is up. [ "$NETWORKING" = "no" ] && exit 0 # PATH should only include /usr/* if it runs after the mountnfs.sh script PATH=/usr/local/bin:/usr/local/sbin/:/sbin:/usr/sbin:/bin:/usr/bin DESC="Puma rack web server" NAME=puma DAEMON=$NAME SCRIPTNAME=/etc/init.d/$NAME CONFIG=/etc/puma.conf JUNGLE=`cat $CONFIG` RUNPUMA=/usr/local/bin/run-puma # Skipping the following non-CentOS string # Load the VERBOSE setting and other rcS variables # . /lib/init/vars.sh # CentOS does not have these functions natively log_daemon_msg() { echo "$@"; } log_end_msg() { [ $1 -eq 0 ] && RES=OK; logger ${RES:=FAIL}; } # Define LSB log_* functions. # Depend on lsb-base (>= 3.0-6) to ensure that this file is present. . /lib/lsb/init-functions # # Function that performs a clean up of puma.* files # cleanup() { echo "Cleaning up puma temporary files..." echo $1; PIDFILE=$1/tmp/puma/puma.pid STATEFILE=$1/tmp/puma/puma.state SOCKFILE=$1/tmp/puma/puma.sock rm -f $PIDFILE $STATEFILE $SOCKFILE } # # Function that starts the jungle # do_start() { log_daemon_msg "=> Running the jungle..." for i in $JUNGLE; do dir=`echo $i | cut -d , -f 1` user=`echo $i | cut -d , -f 2` config_file=`echo $i | cut -d , -f 3` if [ "$config_file" = "" ]; then config_file="$dir/puma/config.rb" fi log_file=`echo $i | cut -d , -f 4` if [ "$log_file" = "" ]; then log_file="$dir/puma/puma.log" fi do_start_one $dir $user $config_file $log_file done } do_start_one() { PIDFILE=$1/puma/puma.pid if [ -e $PIDFILE ]; then PID=`cat $PIDFILE` # If the puma isn't running, run it, otherwise restart it. if [ "`ps -A -o pid= | grep -c $PID`" -eq 0 ]; then do_start_one_do $1 $2 $3 $4 else do_restart_one $1 fi else do_start_one_do $1 $2 $3 $4 fi } do_start_one_do() { log_daemon_msg "--> Woke up puma $1" log_daemon_msg "user $2" log_daemon_msg "log to $4" cleanup $1; daemon --user $2 $RUNPUMA $1 $3 $4 } # # Function that stops the jungle # do_stop() { log_daemon_msg "=> Putting all the beasts to bed..." for i in $JUNGLE; do dir=`echo $i | cut -d , -f 1` do_stop_one $dir done } # # Function that stops the daemon/service # do_stop_one() { log_daemon_msg "--> Stopping $1" PIDFILE=$1/tmp/puma/puma.pid STATEFILE=$1/tmp/puma/puma.state echo $PIDFILE if [ -e $PIDFILE ]; then PID=`cat $PIDFILE` echo "Pid:" echo $PID if [ "`ps -A -o pid= | grep -c $PID`" -eq 0 ]; then log_daemon_msg "---> Puma $1 isn't running." else log_daemon_msg "---> About to kill PID `cat $PIDFILE`" # pumactl --state $STATEFILE stop # Many daemons don't delete their pidfiles when they exit. kill -9 $PID fi cleanup $1 else log_daemon_msg "---> No puma here..." fi return 0 } # # Function that restarts the jungle # do_restart() { for i in $JUNGLE; do dir=`echo $i | cut -d , -f 1` do_restart_one $dir done } # # Function that sends a SIGUSR2 to the daemon/service # do_restart_one() { PIDFILE=$1/tmp/puma/puma.pid i=`grep $1 $CONFIG` dir=`echo $i | cut -d , -f 1` if [ -e $PIDFILE ]; then log_daemon_msg "--> About to restart puma $1" # pumactl --state $dir/tmp/puma/state restart kill -s USR2 `cat $PIDFILE` # TODO Check if process exist else log_daemon_msg "--> Your puma was never playing... Let's get it out there first" user=`echo $i | cut -d , -f 2` config_file=`echo $i | cut -d , -f 3` if [ "$config_file" = "" ]; then config_file="$dir/config/puma.rb" fi log_file=`echo $i | cut -d , -f 4` if [ "$log_file" = "" ]; then log_file="$dir/log/puma.log" fi do_start_one $dir $user $config_file $log_file fi return 0 } # # Function that statuss then jungle # do_status() { for i in $JUNGLE; do dir=`echo $i | cut -d , -f 1` do_status_one $dir done } # # Function that sends a SIGUSR2 to the daemon/service # do_status_one() { PIDFILE=$1/tmp/puma/pid i=`grep $1 $CONFIG` dir=`echo $i | cut -d , -f 1` if [ -e $PIDFILE ]; then log_daemon_msg "--> About to status puma $1" pumactl --state $dir/tmp/puma/state stats # kill -s USR2 `cat $PIDFILE` # TODO Check if process exist else log_daemon_msg "--> $1 isn't there :(..." fi return 0 } do_add() { str="" # App's directory if [ -d "$1" ]; then if [ "`grep -c "^$1" $CONFIG`" -eq 0 ]; then str=$1 else echo "The app is already being managed. Remove it if you want to update its config." exit 1 fi else echo "The directory $1 doesn't exist." exit 1 fi # User to run it as if [ "`grep -c "^$2:" /etc/passwd`" -eq 0 ]; then echo "The user $2 doesn't exist." exit 1 else str="$str,$2" fi # Config file if [ "$3" != "" ]; then if [ -e $3 ]; then str="$str,$3" else echo "The config file $3 doesn't exist." exit 1 fi fi # Log file if [ "$4" != "" ]; then str="$str,$4" fi # Add it to the jungle echo $str >> $CONFIG log_daemon_msg "Added a Puma to the jungle: $str. You still have to start it though." } do_remove() { if [ "`grep -c "^$1" $CONFIG`" -eq 0 ]; then echo "There's no app $1 to remove." else # Stop it first. do_stop_one $1 # Remove it from the config. sed -i "\\:^$1:d" $CONFIG log_daemon_msg "Removed a Puma from the jungle: $1." fi } case "$1" in start) [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME" if [ "$#" -eq 1 ]; then do_start else i=`grep $2 $CONFIG` dir=`echo $i | cut -d , -f 1` user=`echo $i | cut -d , -f 2` config_file=`echo $i | cut -d , -f 3` if [ "$config_file" = "" ]; then config_file="$dir/config/puma.rb" fi log_file=`echo $i | cut -d , -f 4` if [ "$log_file" = "" ]; then log_file="$dir/log/puma.log" fi do_start_one $dir $user $config_file $log_file fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; stop) [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" if [ "$#" -eq 1 ]; then do_stop else i=`grep $2 $CONFIG` dir=`echo $i | cut -d , -f 1` do_stop_one $dir fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; status) # TODO Implement. log_daemon_msg "Status $DESC" "$NAME" if [ "$#" -eq 1 ]; then do_status else i=`grep $2 $CONFIG` dir=`echo $i | cut -d , -f 1` do_status_one $dir fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; restart) log_daemon_msg "Restarting $DESC" "$NAME" if [ "$#" -eq 1 ]; then do_restart else i=`grep $2 $CONFIG` dir=`echo $i | cut -d , -f 1` do_restart_one $dir fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; add) if [ "$#" -lt 3 ]; then echo "Please, specifiy the app's directory and the user that will run it at least." echo " Usage: $SCRIPTNAME add /path/to/app user /path/to/app/config/puma.rb /path/to/app/config/log/puma.log" echo " config and log are optionals." exit 1 else do_add $2 $3 $4 $5 fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; remove) if [ "$#" -lt 2 ]; then echo "Please, specifiy the app's directory to remove." exit 1 else do_remove $2 fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; *) echo "Usage:" >&2 echo " Run the jungle: $SCRIPTNAME {start|stop|status|restart}" >&2 echo " Add a Puma: $SCRIPTNAME add /path/to/app user /path/to/app/config/puma.rb /path/to/app/config/log/puma.log" echo " config and log are optionals." echo " Remove a Puma: $SCRIPTNAME remove /path/to/app" echo " On a Puma: $SCRIPTNAME {start|stop|status|restart} PUMA-NAME" >&2 exit 3 ;; esac :

    Read the article

  • Motion - can't get streaming working from a webcam

    - by Emmanuel Brunet
    I'm trying to record a video stream from my Tenvis IP camera with motion 3.2.12 on Debian 7.5. I used the standard debian package with sudo apt-get install motion Assume my DNS IP cam is webcam, user : admin, password : password /etc/motion/motion.conf Bellow are my configuration file settings : netcam_url http://webcam/videostream.cgi netcam_userpass admin:password target_dir /media/videos/log/motion # The mini-http server listens to this port for requests (default: 0 = disabled) webcam_port 1234 ffmpeg_cap_new on ffmpeg_video_codec mpeg4 output_motion off snapshot_interval 0 # Quality of the jpeg (in percent) images produced (default: 50) webcam_quality 50 # Output frames at 1 fps when no motion is detected and increase to the # rate given by webcam_maxrate when motion is detected (default: off) webcam_motion on # Maximum framerate for webcam streams (default: 1) webcam_maxrate 15 # Restrict webcam connections to localhost only (default: on) webcam_localhost on # Limits the number of images per connection (default: 0 = unlimited) # Number can be defined by multiplying actual webcam rate by desired number of seconds # Actual webcam rate is the smallest of the numbers framerate and webcam_maxrate webcam_limit 0 control_port 8080 control_authentication admin:password Issue #1 when I try display http:/localhost:1234 the browser looks frozen, no HTTP 404 received but it stills waiting for data it seems .. Issue #2 in the output directory motion writes a lot of jpeg snapshots althought I just want to have several video sequenced files. Log I run motion in interactive mode in a terminal, here is the ouput root@mercure:/etc/motion# motion -c motion-1.0.conf [0] Processing thread 0 - config file motion-1.0.conf [0] Motion 3.2.12 Started [0] ffmpeg LIBAVCODEC_BUILD 3482368 LIBAVFORMAT_BUILD 3478785 [0] Thread 1 is from motion-1.0.conf [0] motion-httpd/3.2.12 running, accepting connections [0] motion-httpd: waiting for data on port TCP 8080 [1] Thread 1 started [1] Resizing pre_capture buffer to 1 items [1] Started stream webcam server in port 1234 [1] avcodec_open - could not open codec: Operation now in progress [1] ffopen_open error creating (new) file [~/tmp/motion/01-20140603165303.avi]: Operation now in progress [1] File of type 1 saved to: ~/tmp/motion/01-20140603165303-01.jpg [1] Thread exiting [1] Calling vid_close() from motion_cleanup [1] vid_close: calling netcam_cleanup [1] netcam camera handler: finish set, exiting [0] Motion thread 1 restart [1] Thread 1 started [1] Resizing pre_capture buffer to 1 items [1] Started stream webcam server in port 1234 [1] avcodec_open - could not open codec: Resource temporarily unavailable [1] ffopen_open error creating (new) file [~/tmp/motion/01-20140603165329.avi]: Resource temporarily unavailable [1] File of type 1 saved to: ~/tmp/motion/01-20140603165329-00.jpg [1] Thread exiting [1] Calling vid_close() from motion_cleanup [1] vid_close: calling netcam_cleanup [1] netcam camera handler: finish set, exiting [0] Motion thread 1 restart [1] Thread 1 started [1] Resizing pre_capture buffer to 1 items [1] Started stream webcam server in port 1234 [1] avcodec_open - could not open codec: Connection reset by peer [1] ffopen_open error creating (new) file [~/tmp/motion/01-20140603165355.avi]: Connection reset by peer [1] File of type 1 saved to: ~/tmp/motion/01-20140603165355-06.jpg [1] Thread exiting [1] Calling vid_close() from motion_cleanup [1] vid_close: calling netcam_cleanup [0] httpd - Finishing [0] httpd Closing [0] httpd thread exit [1] netcam camera handler: finish set, exiting [0] Motion thread 1 restart [1] Thread 1 started [1] Resizing pre_capture buffer to 1 items [1] Started stream webcam server in port 1234 It doesn't find the codec ... avcodec_open - could not open codec: Operation now in progress I've changed fmpeg_video_codec from mpeg4 to swf the result is the same. When using flv format motion writes a lot of .jpg image but I can't see anything at http://localhost:1234 [1] File of type 1 saved to: ~/tmp/motion/01-20140603171035-00.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171035-01.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171035-02.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171035-03.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171035-04.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171035-05.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171035-06.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171036-00.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171036-01.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171036-02.jpg Any idea just to get the video stream recoded on my local disk ?

    Read the article

  • nginx server over https using up all available file handles (upd: infinite loop?)

    - by mmr
    Hi all, So I have an nginx server that's working over https with Sinatra. When I try to download a jnlp file in a configuration that works fine over Mongrel and http (no s), the nginx server fails to serve the file with a 504 error. Subsequent checking of the logs states that this error is due to overflowing the available number of file handles, ie, "24: too many open files". Running sudo lsof -p <nginx worker pid> gets me a huge list of files, all looking like: nginx 1771 nobody 11u IPv4 10867997 0t0 TCP localhost:44704->localhost:https (ESTABLISHED) nginx 1771 nobody 12u IPv4 10868113 0t0 TCP localhost:https->localhost:44704 (ESTABLISHED) nginx 1771 nobody 13u IPv4 10868114 0t0 TCP localhost:44705->localhost:https (ESTABLISHED) nginx 1771 nobody 14u IPv4 10868191 0t0 TCP localhost:https->localhost:44705 (ESTABLISHED) nginx 1771 nobody 15u IPv4 10868192 0t0 TCP localhost:44706->localhost:https (ESTABLISHED) nginx 1771 nobody 16u IPv4 10868255 0t0 TCP localhost:https->localhost:44706 (ESTABLISHED) nginx 1771 nobody 17u IPv4 10868256 0t0 TCP localhost:44707->localhost:https (ESTABLISHED) nginx 1771 nobody 18u IPv4 10868330 0t0 TCP localhost:https->localhost:44707 (ESTABLISHED) nginx 1771 nobody 19u IPv4 10868331 0t0 TCP localhost:44708->localhost:https (ESTABLISHED) nginx 1771 nobody 20u IPv4 10868434 0t0 TCP localhost:https->localhost:44708 (ESTABLISHED) Increasing the number of files that can be opened is no help, because then nginx just blows right past that limit. And no wonder, it looks like it's in some kind of loop to pull all available files. Any idea what's going on, and how to fix it? EDIT: nginx 0.7.63, ubuntu linux, sinatra 1.0 EDIT 2: Here's the offending code. It's sinatra serving jnlp, which I finally figured out: get '/uploader' do #read in the launch.jnlp file theJNLP = "" File.open("/launch.jnlp", "r+") do |file| while theTemp = file.gets theJNLP = theJNLP + theTemp end end content_type :jnlp theJNLP end If I serve this with Sinatra via Mongrel and http, everything works fine. If I serve this with Sinatra and nginx via https, I get the above error. All other parts of the website appear to be equivalent. EDIT: I have since upgraded to passenger 2.2.14, ruby 1.9.1, nginx 0.8.40, openssl 1.0.0a, and no change. EDIT: The culprit appears to be infinite redirects due to using SSL. I don't know how to fix this, other than hosting the jnlp file in the root directory of the server (which I'd rather not do, since it limits me to one jnlp-based app at a time). The relevant lines from nginx.conf: # HTTPS server # server { listen 443; server_name MyServer.org root /My/Root/Dir; passenger_enabled on; expires 1d; proxy_set_header X-FORWARDED_PROTO https; proxy_set_header X_FORWARDED_PROTO https;#the almighty google is not clear on which to use location /upload { proxy_pass https://127.0.0.1:443; } } The funny thing about this is, first, I was putting the jnlp into a directory called 'uploader', not 'upload', but that still appeared to trigger the problem, since that proxy_pass directive appeared in the logs. Second, again, moving the jnlp into root avoided the problem, because there wasn't any of this proxying due to ssl. So, how can I avoid the infinite proxy_pass loop in nginx?

    Read the article

  • Ubuntu 14.04, OpenLDAP TLS problems

    - by larsemil
    So i have set up an openldap server using this guide here. It worked fine. But as i want to use sssd i also need TLS to be working for ldap. So i looked into and followed the TLS part of the guide. And i never got any errors and slapd started fine again. BUT. It does not seem to work when i try to use ldap over tls. root@server:~# ldapsearch -x -ZZ -H ldap://83.209.243.253 -b dc=daladevelop,dc=se ldap_start_tls: Protocol error (2) additional info: unsupported extended operation Ganking up the debug level some notches returns some more information: root@server:~# ldapsearch -x -ZZ -H ldap://83.209.243.253 -b dc=daladevelop,dc=se -d 5 ldap_url_parse_ext(ldap://83.209.243.253) ldap_create ldap_url_parse_ext(ldap://83.209.243.253:389/??base) ldap_extended_operation_s ldap_extended_operation ldap_send_initial_request ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP 83.209.243.253:389 ldap_new_socket: 3 ldap_prepare_socket: 3 ldap_connect_to_host: Trying 83.209.243.253:389 ldap_pvt_connect: fd: 3 tm: -1 async: 0 ldap_open_defconn: successful ldap_send_server_request ber_scanf fmt ({it) ber: ber_scanf fmt ({) ber: ber_flush2: 31 bytes to sd 3 ldap_result ld 0x7f25df51e220 msgid 1 wait4msg ld 0x7f25df51e220 msgid 1 (infinite timeout) wait4msg continue ld 0x7f25df51e220 msgid 1 all 1 ** ld 0x7f25df51e220 Connections: * host: 83.209.243.253 port: 389 (default) refcnt: 2 status: Connected last used: Fri Jun 6 08:52:16 2014 ** ld 0x7f25df51e220 Outstanding Requests: * msgid 1, origid 1, status InProgress outstanding referrals 0, parent count 0 ld 0x7f25df51e220 request count 1 (abandoned 0) ** ld 0x7f25df51e220 Response Queue: Empty ld 0x7f25df51e220 response count 0 ldap_chkResponseList ld 0x7f25df51e220 msgid 1 all 1 ldap_chkResponseList returns ld 0x7f25df51e220 NULL ldap_int_select read1msg: ld 0x7f25df51e220 msgid 1 all 1 ber_get_next ber_get_next: tag 0x30 len 42 contents: read1msg: ld 0x7f25df51e220 msgid 1 message type extended-result ber_scanf fmt ({eAA) ber: read1msg: ld 0x7f25df51e220 0 new referrals read1msg: mark request completed, ld 0x7f25df51e220 msgid 1 request done: ld 0x7f25df51e220 msgid 1 res_errno: 2, res_error: <unsupported extended operation>, res_matched: <> ldap_free_request (origid 1, msgid 1) ldap_parse_extended_result ber_scanf fmt ({eAA) ber: ldap_parse_result ber_scanf fmt ({iAA) ber: ber_scanf fmt (}) ber: ldap_msgfree ldap_err2string ldap_start_tls: Protocol error (2) additional info: unsupported extended operation ldap_free_connection 1 1 ldap_send_unbind ber_flush2: 7 bytes to sd 3 ldap_free_connection: actually freed So no good information there neither. In /var/log/syslog i get: Jun 6 08:55:42 master slapd[21383]: conn=1008 fd=23 ACCEPT from IP=83.209.243.253:56440 (IP=0.0.0.0:389) Jun 6 08:55:42 master slapd[21383]: conn=1008 op=0 EXT oid=1.3.6.1.4.1.1466.20037 Jun 6 08:55:42 master slapd[21383]: conn=1008 op=0 do_extended: unsupported operation "1.3.6.1.4.1.1466.20037" Jun 6 08:55:42 master slapd[21383]: conn=1008 op=0 RESULT tag=120 err=2 text=unsupported extended operation Jun 6 08:55:42 master slapd[21383]: conn=1008 op=1 UNBIND Jun 6 08:55:42 master slapd[21383]: conn=1008 fd=23 closed If i portscan the host i get the following: Starting Nmap 6.40 ( http://nmap.org ) at 2014-06-06 08:56 CEST Nmap scan report for h83-209-243-253.static.se.alltele.net (83.209.243.253) Host is up (0.0072s latency). Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 389/tcp open ldap 636/tcp open ldapssl But when i check certs root@master:~# openssl s_client -connect daladevelop.se:636 -showcerts -state CONNECTED(00000003) SSL_connect:before/connect initialization SSL_connect:unknown state 140244859233952:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:177: --- no peer certificate available --- No client certificate CA names sent --- SSL handshake has read 0 bytes and written 317 bytes --- New, (NONE), Cipher is (NONE) Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE --- And i feel like i am clearly out in deep water not knowing at all where to go from here. Anny hints appreciated on what to do or to get better debug logging... EDIT: This is my config slapcated from cn=config and it does not mention at all anything about TLS. I have inserted my certinfo.ldif: root@master:~# cat certinfo.ldif dn: cn=config add: olcTLSCACertificateFile olcTLSCACertificateFile: /etc/ssl/certs/cacert.pem - add: olcTLSCertificateFile olcTLSCertificateFile: /etc/ssl/certs/daladevelop_slapd_cert.pem - add: olcTLSCertificateKeyFile olcTLSCertificateKeyFile: /etc/ssl/private/daladevelop_slapd_key.pem and when doing that i only got this as an answer. root@master:~# sudo ldapmodify -Y EXTERNAL -H ldapi:/// -f certinfo.ldif SASL/EXTERNAL authentication started SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth SASL SSF: 0 modifying entry "cn=config" So still no wiser.

    Read the article

  • Reinstall Postfix

    - by Kevin
    I tried to reinstall Postfix, but I get this bunch of errors: root@***:/etc/init.d# sudo apt-get install -f postfix Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: procmail postfix-mysql postfix-pgsql postfix-ldap postfix-pcre resolvconf postfix-cdb mail-reader The following NEW packages will be installed: postfix 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/1,389kB of archives. After this operation, 3,531kB of additional disk space will be used. Preconfiguring packages ... Selecting previously deselected package postfix. (Reading database ... 56122 files and directories currently installed.) Unpacking postfix (from .../postfix_2.7.1-1ubuntu0.1_amd64.deb) ... Processing triggers for ureadahead ... Processing triggers for ufw ... Processing triggers for man-db ... Setting up postfix (2.7.1-1ubuntu0.1) ... Configuration file `/etc/init.d/postfix' ==> File on system created by you or by a script. ==> File also in package provided by package maintainer. What would you like to do about it ? Your options are: Y or I : install the package maintainer's version N or O : keep your currently-installed version D : show the differences between the versions Z : start a shell to examine the situation The default action is to keep your current version. *** postfix (Y/I/N/O/D/Z) [default=N] ? Y Installing new version of config file /etc/init.d/postfix ... Adding group `postfix' (GID 109) ... Done. Adding system user `postfix' (UID 106) ... Adding new user `postfix' (UID 106) with group `postfix' ... Not creating home directory `/var/spool/postfix'. Creating /etc/postfix/dynamicmaps.cf Adding tcp map entry to /etc/postfix/dynamicmaps.cf Adding group `postdrop' (GID 115) ... Done. setting myhostname: ***.net setting alias maps setting alias database setting myorigin setting destinations: ***.net, localhost.***.net, , localhost setting relayhost: setting mynetworks: 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 setting mailbox_size_limit: 0 setting recipient_delimiter: + setting inet_interfaces: all Postfix is now set up with a default configuration. If you need to make changes, edit /etc/postfix/main.cf (and others) as needed. To view Postfix configuration values, see postconf(1). After modifying main.cf, be sure to run '/etc/init.d/postfix reload'. Running newaliases postalias: fatal: /etc/mailname: cannot open file: Permission denied dpkg: error processing postfix (--configure): subprocess installed post-installation script returned error exit status 1 Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: postfix E: Sub-process /usr/bin/dpkg returned an error code (1) I tried aptitude purge, remove, autoclean and all of dpkg options (configure, remove, purge) but nothing did the trick. /etc/mailname exists (0644 root:root) with as content *.net (fetched from hostname). What am I doing wrong?

    Read the article

  • nconf nagios config no services defined

    - by user1508056
    I've setup Nagios core on OSX 10.7 server via macports fine. It seems to load fine and the sample config files all copied over to /opt/local/etc/nagios/objects/ fine and are specified correctly in the nagios.cfg file. I then installed nconf manually and got it running without much fight. Then I clicked on "Generate Nagios config" in nconf and get 1 warning and 4 errors. When I expand the error box here what I see: Nagios Core 3.5.0 Copyright (c) 2009-2011 Nagios Core Development Team and Community Contributors Copyright (c) 1999-2009 Ethan Galstad Last Modified: 03-15-2013 License: GPL Website: http://www.nagios.org Reading configuration data... Read main config file okay... Read object config files okay... Running pre-flight check on configuration data... Checking services... Error: There are no services defined! Checked 0 services. Checking hosts... Error: There are no hosts defined! Checked 0 hosts. Checking host groups... Checked 0 host groups. Checking service groups... Checked 0 service groups. Checking contacts... Error: There are no contacts defined! Checked 0 contacts. Checking contact groups... Checked 0 contact groups. Checking service escalations... Checked 0 service escalations. Checking service dependencies... Checked 0 service dependencies. Checking host escalations... Checked 0 host escalations. Checking host dependencies... Checked 0 host dependencies. Checking commands... Checked 0 commands. Checking time periods... Checked 0 time periods. Checking for circular paths between hosts... Checking for circular host and service dependencies... Checking global event handlers... Checking obsessive compulsive processor commands... Checking misc settings... Warning: Nothing specified for illegal_macro_output_chars variable! Total Warnings: 1 Total Errors: 3 I've tried several different things (played with cache settings, changed file permissions/ownership, edited some config files manually, etc.) but nothing gets me past this step. The thing is, when I run 'sudo nagios -v /opt/local/etc/nagios/nagios.cfg' the output shows it is reading a number of services, a localhost, and a contact in the .cfg files...so I'm pretty confident those are ok and the problem is nconf isnt reading the correct .cfg files or something like that. Any ideas what to double check? I did lots of googling and found nothing on this specific issue--so either I'm special (I'm not) or am overlooking something really simple. The path to nagios binary is listed as /opt/local/bin/nagios, if that matters. Also, all the nagios files are owned by nagios:nagios, wheras nconf files are owned by user, with only the directories/files specified in the nconf docs belonging to the _www user and/or group (things like output, temp, config, etc.). Thanks.

    Read the article

  • x11vnc working in Ubuntu 10.10

    - by pablorc
    I'm trying to start x11vnc in a Ubuntu 10.10 (my server is in Amazon EC2), but I have the next error $ sudo x11vnc -forever -usepw -httpdir /usr/share/vnc-java/ -httpport 5900 -auth /usr/sbin/gdm 25/11/2010 13:29:51 passing arg to libvncserver: -httpport 25/11/2010 13:29:51 passing arg to libvncserver: 5900 25/11/2010 13:29:51 -usepw: found /home/ubuntu/.vnc/passwd 25/11/2010 13:29:51 x11vnc version: 0.9.10 lastmod: 2010-04-28 pid: 3504 25/11/2010 13:29:51 XOpenDisplay(":0.0") failed. 25/11/2010 13:29:51 Trying again with XAUTHLOCALHOSTNAME=localhost ... 25/11/2010 13:29:51 *************************************** 25/11/2010 13:29:51 *** XOpenDisplay failed (:0.0) *** x11vnc was unable to open the X DISPLAY: ":0.0", it cannot continue. *** There may be "Xlib:" error messages above with details about the failure. Some tips and guidelines: ** An X server (the one you wish to view) must be running before x11vnc is started: x11vnc does not start the X server. (however, see the -create option if that is what you really want). ** You must use -display <disp>, -OR- set and export your $DISPLAY environment variable to refer to the display of the desired X server. - Usually the display is simply ":0" (in fact x11vnc uses this if you forget to specify it), but in some multi-user situations it could be ":1", ":2", or even ":137". Ask your administrator or a guru if you are having difficulty determining what your X DISPLAY is. ** Next, you need to have sufficient permissions (Xauthority) to connect to the X DISPLAY. Here are some Tips: - Often, you just need to run x11vnc as the user logged into the X session. So make sure to be that user when you type x11vnc. - Being root is usually not enough because the incorrect MIT-MAGIC-COOKIE file may be accessed. The cookie file contains the secret key that allows x11vnc to connect to the desired X DISPLAY. - You can explicitly indicate which MIT-MAGIC-COOKIE file should be used by the -auth option, e.g.: x11vnc -auth /home/someuser/.Xauthority -display :0 x11vnc -auth /tmp/.gdmzndVlR -display :0 you must have read permission for the auth file. See also '-auth guess' and '-findauth' discussed below. ** If NO ONE is logged into an X session yet, but there is a greeter login program like "gdm", "kdm", "xdm", or "dtlogin" running, you will need to find and use the raw display manager MIT-MAGIC-COOKIE file. Some examples for various display managers: gdm: -auth /var/gdm/:0.Xauth -auth /var/lib/gdm/:0.Xauth kdm: -auth /var/lib/kdm/A:0-crWk72 -auth /var/run/xauth/A:0-crWk72 xdm: -auth /var/lib/xdm/authdir/authfiles/A:0-XQvaJk dtlogin: -auth /var/dt/A:0-UgaaXa Sometimes the command "ps wwwwaux | grep auth" can reveal the file location. Starting with x11vnc 0.9.9 you can have it try to guess by using: -auth guess (see also the x11vnc -findauth option.) Only root will have read permission for the file, and so x11vnc must be run as root (or copy it). The random characters in the filenames will of course change and the directory the cookie file resides in is system dependent. See also: http://www.karlrunge.com/x11vnc/faq.html I've already tried with some -auth options but the error persist. I have gdm running. Thank you in advance

    Read the article

  • Ubuntu Server, 2 Ethernet Devices, Same Gateway - Want to force internet traffic through 1 device (or at least allow it to work!)

    - by Chris Drumgoole
    I have a Ubuntu 10.04 Server with 2 ethernet devices, eth0 and eth1. eth0 has a static IP of 192.168.1.210 eth1 has a static IP if 192.168.1.211 The DHCP server (which also serves as the internet gateway) sits at 192.168.1.1. The issue I have right now is when I have both plugged in, I can connect to both IPs over SSH internally, but I can't connect to the internet from the server. If I unplug one of the devices (e.g. eth1), then it works, no problem. (Also, I get the same result when I run sudo ifconfig eth1 down). Question, how can I configure it so that I can have both devices eth0 and eth1 play nice on the same network, but allow internet access as well? (I am open to either enforcing all inet traffic going through a single device, or through both, I'm flexible). From my google searching, it seems I could have a unique (or not popular) problem, so haven't been able to find a solution. Is this something that people generally don't do? The reason I want to make use of both ethernet devices is because I want to run different local traffic services on on both to split the load, so to speak... Thanks in advance. UPDATE Contents of /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # The secondary network interface #auto eth1 #iface eth1 inet dhcp (Note: above, I commented out the last 2 lines because I thought that was causing issues... but it didn't solve it) netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 192.168.1.1 255.255.255.0 UG 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 UPDATE 2 I made a change to the /etc/network/interfaces file as suggested by Kevin. Before I display the file contents and the route table, when I am logged into the server (through SSH), I can not ping an external server, so this is the same issue I was experiencing that led to me posting this question. I ran a /etc/init.d/networking restart after making the file changes. Contents of /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp address 192.168.1.210 netmask 255.255.255.0 gateway 192.168.1.1 # The secondary network interface auto eth1 iface eth1 inet dhcp address 192.168.1.211 netmask 255.255.255.0 ifconfig output eth0 Link encap:Ethernet HWaddr 78:2b:cb:4c:02:7f inet addr:192.168.1.210 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::7a2b:cbff:fe4c:27f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6397 errors:0 dropped:0 overruns:0 frame:0 TX packets:683 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:538881 (538.8 KB) TX bytes:85597 (85.5 KB) Interrupt:36 Memory:da000000-da012800 eth1 Link encap:Ethernet HWaddr 78:2b:cb:4c:02:80 inet addr:192.168.1.211 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::7a2b:cbff:fe4c:280/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5799 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:484436 (484.4 KB) TX bytes:1184 (1.1 KB) Interrupt:48 Memory:dc000000-dc012800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:635 errors:0 dropped:0 overruns:0 frame:0 TX packets:635 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:38154 (38.1 KB) TX bytes:38154 (38.1 KB) netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0

    Read the article

< Previous Page | 216 217 218 219 220 221 222 223 224  | Next Page >