Search Results

Search found 7024 results on 281 pages for 'usb modem'.

Page 220/281 | < Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >

• WIFI connection stopped working on Windows - how to troubleshoot

  - by Michiel de Mare

  Friends and family often come to me with this problem, and while I usually manage to fix their problems eventually, it often take me several hours. I'm sure there are many of us in the same position. Also, friends rarely seem to know which provider they're using, or what the password is of their WIFI-connection or ADSL-router. I'd like to gather that information myself. I'd like to have a checklist to diagnose and fix the problem, and a set of utilities on an usb-stick to help me. Where to start?

  Read the article

• fedora liveUSB fails, drops to debug shell

  - by evan

  Trying to install Fedora 15 via a live USB made with unetbootin. I get to the unetbootin boot menu, select Fedora-15-x86_64-Live-Desktop.is, I get to this screen, then it drops into a debug shell with the message sh: can't access tty: job control turned off. The last message is dmseg is dracut Warning: No root device "live:/dev/disk/by-label/Fedora-15-Beta-x86_64-Live-Desktop.is" found. Seems to be the same problem detailed here. Tried to try nk1eto's solution but there is no by-label directory in /dev/disk. There's by-id, by-path and by-uuid.

  Read the article

• Forgot to unmount/eject external hard drive, lost moved files. Mac OS X

  - by balupton

  So I was using my Mac with my external hard drive connected via USB. I moved about 10 GB of data to it (via drag and drop while holding down the Command key to move the files rather than to copy them). They moved to the drive all right, but as I was having some issues and the Finder crashed after the transfer, I was unable to eject the volume and later everything froze so I had to do a hard restart (hold the power button). When I remounted the volume (plugged the external hard drive back in) it no longer had any of the files which I moved onto it. As it was a lot of data, how can I recover these files?

  Read the article

• Computer Components

  - by Martin

  What is the role of a motherboard in terms of how components communicate with the processor (via the system busses). Therefore, for each component, which communication bus is involved and what is the route that data takes from the component to the processor, including; The bus name Whether bus is serial or parallel The name of any bridges involved Also, what is the the role of a bridge The components are: Internal components: Floppy Drive, Hard Drive, CD/DVD Drive, Memory, Processor Power supply, Graphics card & Sound card External devices: Monitor, Keyboard, Mouse (PS2 & USB), Printer, Pen Drive I have absolutely no idea of what the routes are and how motherboards communicate, could someone give me a start here? Thanks.

  Read the article

• How can I dual install Ubuntu 10.4 in a Mac Mini with 10.4.11?

  - by Marco Mariani

  I'd like to power-up my aging Mac Mini (1.5GHz Core Solo, 1GB RAM, Tiger 10.4.11) by installing a shiny Ubuntu alongside the current OS. After all, I use Ubuntu for everything save for cleaning my teeth. Since it's my first and only Mac and I have next to no experience with the OS (having used it basically as a media player) I am a little concerned about rEFIt, ELILO, Boot Camp and the fact that it's basically a 4.5 years old unsupported machine and I might get asleep reinstalling everything several times. I've used the live desktop-i386 CD and everything works. I tried with an external USB drive instead of a CD but couldn't make it boot. As for installing Ubuntu, the howtos I've found give several alternatives depending on the model, the OSX version, etc.. but they usually talk about newer machines. Which howto should I follow to repartition, and boot thereafter? Thanks

  Read the article

• Can't access certain web sites - reset router, any ideas?

  - by IniTech

  EDIT: This problem was resolved by my ISP - had to do with damaged fiber in one of their locations. Thanks to everyone that helped. Not sure if this is the right site (I'm a StackOverflow user) so I thought I'd give it a shot. I'm having trouble connecting to certain sites on any of the 3 machines that are on my LAN. The following sites are returning "Problem Loading Page - The connection has timed out" Sourceforge.net CNet.com Microsoft.com OpenDNS.com even my company's webiste I was worried about possible malware/virus, but I don't think that is the case (given the inability to access my company's site and the fact that all 3 machines are having the same issues.) I've tried with IE8, FF, and Chrome I have reset my router (WRT54G) and my machine(s) multiple times. EDIT: It is also worth noting that this page spins constantly and no avatars show up (I'm assuming it is trying to access gravatar.com with no success.) EDIT: I have the same issues directly connected to the modem. So, any router config is probably not the issue I'm a programmer, not a network guy - any ideas?

  Read the article

• What could cause TFTP reloaded Cisco `running-config` on 871 to fail?

  - by xtian

  Cisco CCP Write Configuration borked my 871w config while I was trying to setup port forwarding. I went through the basic steps to reconfig the router. I looked to see if I could just reset the router. Nope. I tested the 871's flash memory with fsck to see if there was hardware failure. Nope. Then I rewrote the minimal config for TFTP (which is the same for Cisco's CCP app.). Thne, I successfully uploaded a previously working running-config from Win Vista using SolarWinds TFTP Server, unfortunately the restore was not entirely successful. The old running config was saved to the 871's startup-config and I can login using console port. Some other things that are working are the hostname and welcome message but that's about it. Startup shows an error SETUP: new interface NVI0 placed in "shutdown" state after tftp. The missing light on the access point modem for ethernet link show the 871'a outside FE4 is not working. SO...what's the possible problem with reloading a previously working config (approximately 4 months with the same config) via TFTP? Is there something I can look for on the 871 to verify the config? Or on Vista to validate the config file itself before I transfer it? Or, is this there a common TFTP issue? UPDATE. I missed the instruction from Cisco's TFTP page to delete aaa lines from the config (although a video from a SuperUser user didn't make this point in his most excellent demo). There were several lines of this sort, I deleted them and uploaded again. However, they're back. I assume they're added automatically? [nope, see answer] UPDATE 2. The reload of previous settings was successful, but this error remains. I don't even know now if it was there before or not. It seems irrelevant to the question.

  Read the article

• Connection refused after installing vsftp on Ubuntu 8.04 with fail2ban

  - by Patrick

  I have been using an Ubuntu 8.04 server with fail2ban for a while now (12+ months) and using ftp over SSH without any problems. I have a new user that needs to put files onto the server from an IP modem. I have installed vsftp (sudo apt-get install vsftp) and everything installed correctly. I have created an ftp user on the server following this guide. Whenever I try to connect to the server with my ftp program (filezilla) I get an immediate response of: Connection attempt failed with "ECONNREFUSED - Connection refused by server". I have looked into fail2ban and cannot find any problems. The iptables setup is: Chain INPUT (policy ACCEPT) target prot opt source destination fail2ban-ssh tcp -- anywhere anywhere multiport dports ssh Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain fail2ban-ssh (1 references) target prot opt source destination RETURN all -- anywhere anywhere VSFTP config file (commented lines removed) listen=YES anonymous_enable=NO local_enable=YES write_enable=YES dirmessage_enable=YES xferlog_enable=YES connect_from_port_20=YES chown_uploads=YES chown_username=[username] secure_chroot_dir=/var/run/vsftpd pam_service_name=vsftpd rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key Any ideas on what is preventing access to the server?

  Read the article

• Is TrueCrypt robust against data corruption?

  - by Dimitri C.

  I would expect a TrueCrypt volume to be fragile when it suffers from data corruption. This could happen for example because the hard disk, CD or DVD start to deteriorate, or when an USB stick is unplugged while a write is in progress. On the TrueCrypt FAQ it is mentioned that this problem is limited because the data is encrypted in blocks of 16 bytes. However, I'dd like to know if this really so in practice. Is there anyone who has experienced severe data loss due to only small corruptions?

  Read the article

• Install Windows 8 64-bit over the top of Windows 8 32-bit

  - by Andrew Gee

  I currently have Windows 8 32-bit installed from MSDN (I didn't realise at the time that my processor supports 64-bit). I understand that you can't upgrade within Windows 32-bit to 64-bit directly from the ISO. I have burned the ISO to a DVD, and have attempted booting from this drive. The problem I am encountering: The operating system couldn't be loaded because a required file is missing or contains errors. File: CI.dll Error code: 0xc0000221 You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. Additional info: Computer: HP Pavillion m9280.uk-a Processor: AMD Phenom 9600 Quad-Core RAM: 3 1GB sticks Thanks in advance!

  Read the article

• How to Load Balance 2 Internet Connections on a Windows 7 machine?

  - by Jimmy Chandra

  It's sort of related to this particular question, but that one is on Mac. I am looking for similar solution on Windows 7. I have 2 network connections: (Connection A) Wireless terminal connecting to ISP A (3G / EVDO internet provider) (Connection B) Broadband wired connection connecting to ISP B (Cable internet provider) Both has access to the internet. When I try connecting to a website and checking the networking tab on my Task Manager, I only see the network traffic being routed to only Connection A. Is there a way to make the computer to utilize both network (in a sense using all the bandwidth available from both the Cable ISP and the 3G / EVDO ISP) at the same time? If so, what do I need to do to set this up ... on Windows 7? Here is a bit more info on my network connections (ipconfig /all): PPP adapter Wireless Terminal: IPv4: aa.bb.ccc.ddd(preferred) Subnet mask: 255.255.255.255 Default Gateway: 0.0.0.0 DNS: aa.ee.f.ggg aa.ee.f.hhh Primary Wins: jjj.ii.k.l Secondary Wins: jjj.ii.k.m Ethernet adapter LAN: IPv4: 192.168.1.100 (connected to a router by wired that itself connect to a cable modem) subnet mask: 255.255.255.0 Default gateway: 192.168.1.1 (the wireless router) DHCP: 192.168.1.1 (the wireless router) DNS: xxx.yy.zz.ww rr.sss.t.uuu For my own privacy, I don't believe the actual number matters, the patterns are representative of the ip numbering scheme...

  Read the article

• Connecting 2 different subnet masks

  - by Jonathan

  I'm no network genius, but I have managed to get most things running. I get confused about subnets and gateways though. We have an office server connected to around 20 PC's that all communicate fine. We have just gotten a cutting machine that won't connect to our network. The server has DHCP, but that fails on the cutting machine, so I've been trying to set the IP manually. Server details are as follows: IP: 10.1.1.12 SUBNET: 255.255.255.0 GATEWAY: 10.1.1.1 Internet connection is via the modem which is 10.1.1.1 An office PC is ussually set up through DHCP and has the following settings: IP: 10.1.1.36 SUBNET: 255.255.255.0 GATEWAY: 10.1.1.1 PRIMARY DNS: 10.1.1.12 Cutting Machine computer has 2 network ports. 1 is specifically for the communication between the PC and the cutting machine. It's details must be as follows: IP: 10.100.100.2 SUBNET: 255.255.255.252 GATEWAY: BLANK The other network port need to connect to the server. I was told that the IP and SUBNET need to be as follows: IP: 10.100.100.1 SUBNET: 255.255.255.252 GATEWAY: ?? How can I connect this port to the server and/or the internet. If anyone can offer assistance, it would really be appreaciated.

  Read the article

• BSOD on windows 7 with SSD during boot after improper shutdown

  - by Bob

  I have a BSOD on windows 7 with SSD during boot after improper shutdown (while windows animation logo is moving). The computer restart imediatly after BSOD, and windows proposes to launch startup repair (if i do it, it takes +-5min and fixes the problem : computer starts normally). However, after any new improper shutdown, i got the same problem. Remarks: If i unplug, re-plug the SSD whyle system is shutdown, i have the same problem. If i reproduce the situation with old HDD, i havn't the problem Previously, i had a different problem: BSOD when waking up after sleep, which was fixed by installing drivers (ethernet, usb, graphic card) I have made ram chech and ssd check and found no problems Starting with safe mode after improper shutdown causes a BSOD at loading of classpnp.sys Configuration: System: HP compaq 8510p SSD: OCZ vertex-2 2.5 Boot options: SATA native mode - Enable, HDD transalation mode - LBA-assisted

  Read the article

• Google Chrome doesn't want to access Facebook

  - by Pieter van Niekerk

  I have been experiencing a bit of a problem with Chrome over the last couple of days where it doesn't want to access Facebook. When I open Chrome it works fine for a while and then if I were to refresh the page it would give me the Chrome 'This webpage is not available' message. This webpage is not available Google Chrome could not load the webpage because www.facebook.com took too long to respond. The website may be down, or you may be experiencing issues with your Internet connection. Here are some suggestions: Reload this webpage later. Check your Internet connection. Restart any router, modem, or other network devices you may be using. Add Google Chrome as a permitted program in your firewall's or antivirus software's settings. If it is already a permitted program, try deleting it from the list of permitted programs and adding it again. If you use a proxy server, check your proxy settings or contact your network administrator to make sure the proxy server is working. If you don't believe you should be using a proxy server, adjust your proxy settings: Go to the wrench menu Options Under the Hood Change proxy settings... LAN Settings and deselect the "Use a proxy server for your LAN" checkbox. This problem only persists when using the proxy and doesn't occur at all when not on the proxy. I have also tried different browsers (IE9 and Firefox 9.01) but it doesn't occur in any of them. This problem goes away for a while when I restart Chrome, only to happen again a couple of minutes later. I have tried deleting the cookies for Facebook without restarting Chrome, but to no avail. I am using Windows7 with Chrome 17

  Read the article

• Restoring using SyncBack without profiles

  - by Thomas Matthews

  I backed up my internal hard drive (C:) using SyncBack onto an external (USB) hard drive with maximum compression. I then performed a clean install of Windows Vista onto the computer. I forgot to copy the SyncBack logs before the clean install. And now when ever I try to restore a directory, the RAR/ZIP files are copied to the system hard drive instead of extracting their contents to the hard drive. Also, SyncBack is not traversing the folders during the Restore process. How can I tell SyncBack to expand the compressed files? I am running the freeware version of SyncBack. I have to create new log files (unless SyncBack put them somewhere on the external drive). My alternative is to write a program that traverses the folders on the external drive and extracts files from the RAR/ZIP files. I am using Windows Vista, Service Pack 2, and the data size prior to backup was about 200 GB. (The backup process took over 72 hours due to "hiccups").

  Read the article

• Using the same VPC image on multiple workstations

  - by justSteve

  I haven't used an VMs before so brand new to the party. I'm running Win7 off an honest to goodness MSDN license so OS licensing is not an issue. I'd like to think that I could create a VPC image on a USB/eSATA hard drive and move that drive from one Win7-based workstation/laptop to another and I'd have the same services/desktop/computing environment at all of them. I'm a developer working against the IIS7/SQL08 stack with VS10 so i'm working with apps and services as deeply embedded with the OS as you can get. Should I expect to be able to pull this off? thx

  Read the article

• Disk image of a Windows 2000 NTFS hard drive

  - by Federico

  Hi, I need to create a disk image from a Windows 2000, NTFS formatted, hard drive. This image has to be used to create backup hard drives to replace the original disk in case an emergency situation arises. This is a medical equipment, so I cannot physically disconnect the disk because I would violate the warranty of the equipment. This machine has a DVD R/W, ethernet and USB 2.0 access, and we have the rights to install any application I want in the Windows 2000 system. 1) Is there any way to do this without installing any new software in the Windows 2000 system, so it is the least invasive as possible? 2) If we have to install a software to do the backup, which software do you recommend? Any hint will be greatly appreciated. Thanks in advance, Federico

  Read the article

• Drive Shows No Files But Half Space Gone

  - by Chance Robertson

  I have a 500 GB USB drive. When I go to Windows Explorer or Finder, the drive shows that about half the drive is free. However, when I open either drive in Windows 7 or OS X, no files how up. I have tried to look at the files through the command line and nothing shows. A while back, I hooked it up to my MacBookPro and there was a quick message that said the drive was not ejected properly, blah, blah. And of course I did not read the message and hit OK. It there any way to get back my files from the drive?

  Read the article

• What can I do with .chk files in FOUND.000 folders?

  - by Svish

  Just discovered I have gotten a FOUND.000 folder on my usb drive. I guess from running chkdsk once. It has three files in it: FILE0000.CHK FILE0001.CHK FILE0002.CHK What exactly can I do with these files? What are my options? Are they lost files? Are they garbage? Can I use them for anything at all? Or will I just have to delete them?

  Read the article

• What lasts longer: Data stored on non-volatile flash RAM, optical media, or magnetic disk?

  - by Chris W. Rea

  What lasts longer: Data stored on non-volatile flash RAM (USB stick or SD cards?), optical media (CD, DVD, or Blu-Ray?), or magnetic disk (floppies, hard drives?) My gut tells me optical media, but I'm not sure. Furthermore, which of those digital media would be most suitable for long-term data storage where environmental issues are unknown, such as low/high temperature or humidity? For example, what digital media could be stored in a basement, attic, or time capsule, and be expected to survive a reasonably long time? e.g. a lifetime, and then some. Update: Looks like optical media and magnetic tape each have one vote below. Does anybody else have an opinion or know of a study comparing the two?

  Read the article

• DD-WRT/openwrt question

  - by Shiki

  Can I squeeze more speed out of my router (when it comes to USB attached storage device on it) with open/DD wrt? (Sorry I don't really know such firmwares.) (Guess it works with ntfs-3g? I don't know.) Feel free to make this a real question. Basically the question: Does the change worth it in the terms of speed? (My router is a TP-Link WR1043N. Edited it out of the question since it would make it too specified.)

  Read the article

• How can I get a data usage/access log for an external hard-drive?

  - by Vittorio Vittori

  Hello, I'm working in an office with many people and sometimes I leave my external hard drive with my personal data inside. I would to know if there is some way to see if my hard disk was used during my absence. I'm not the computer administrator, so I can't use exclusive file permissions and I would really like to know hard disk is opened from another computer. I am using a Mac. Does exist some other way to protect personal data on usb device like an hard-drive? If yes can you write some link to possible guides? I hope there is some ploy!!

  Read the article

• Using PC or Mac keyboard as Bluetooth keyboard for iPad?

  - by Kevin Hakanson

  I would like to use my computer keyboard (USB) as a Bluetooth keyboard for my iPad, while I am using it with my computer. I was hoping their was an "app for that" that I could run on either Mac or Windows. I imagine how it would work: It would have to emulate a Bluetooth keyboard, and be able to pair with the iPad. Then, when you give focus to this app, it transmits keystrokes from your built-in keyboard out over the Bluetooth connection. Seems simple, but I can't seem to find anything definitive on Google. Has anybody done this? I figure this is cheaper that buying a Apple iPad Keyboard Dock or a Apple Wireless Keyboard from the Apple Store. Also, it's one less item on my desk, which gets cluttered enough with one keyboard.

  Read the article

• Memory modules not running at rated speeds.

  - by Wesley

  Hi all, I'm having some odd memory issues with my build. Here are my specs right now: QDI Superb 4 motherboard Intel Pentium 4 Northwood 2.4GHz (512KB L2, 533MHz FSB) 3x 256MB PC2100 DDR266 RAM 16MB NVIDIA TNT2 Pro AGP Seagate 80GB IDE HDD Generic USB 2.0 PCI Generic Modem PCI Bestec 250W PSU To be even more specific, here are the current brands and models of each module: Kingston KVR266X64C25/256 Samsung PC2100U-25331-Z SMART SM5643285D4N0CHM0H Supposedly, they are all PC2100 266MHz modules with a latency of 2.5. Looking in Speccy, the Kingston module is somehow running at a speed of PC2300 ~284MHz. I've never overclocked RAM at all as I don't know how to. However, when I first started the computer, I had the SMART module in place first and then reset the BIOS settings, including the integrated overclocking options. However, this still doesn't explain why the Kingston module runs at a higher speed than the SMART and Samsung module. Why is it like this? On a side note, where could I find the motherboard manual for the QDI Superb 4? Thanks in advance.

  Read the article

• Can't initialize drive in Windows 7

  - by Abe

  I have a 2.5" laptop harddrive that I plugged into my laptop through a SATA to USB cable. It's powered by an adapter to a normal wall-plug. I want to use it as an external harddrive. It wouldn't initialize (Device is not ready), so as suggested in some instructions I found I uninstalled the drivers, unplugged it and plugged it back in. That worked, and I initialized the drive and formatted it. However I unplugged it after that and a few days later the same strategy does not work and I can't figure out how to use the drive. I can't initialize it and it doesn't show up in my computer.

  Read the article

< Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >