Search Results

Search found 11913 results on 477 pages for 'fail fast fail early'.

Page 221/477 | < Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >

• Set up a root server using Ubuntu and Virtualization

  - by Daniel Völkerts

  Hello, I'd like to setup a fresh root server and install a linux based virtualization on it. My thoughts are on: Intel VTs Hardware Ubuntu 9.10 KVM based virt. The access to the root server will only be SSH for Administration. Has anybody done this before, what was your glues discovered in the daily use? My requirements are: very secure, so the root server only has ssh to the dom-0 and minimalistic ports for the guest (e.g. http/s). good monitoring of host/guest (my idea is to using zabbix for it) easy and fast administration (how are the command line tools working for you? cryptiv? high learning curve?) I'm pleased to learn from your suggestions. Regards, Daniel Völkerts

  Read the article

• What interprocess locking calls should I monitor?

  - by Matt Joiner

  I'm monitoring a process with strace/ltrace in the hope to find and intercept a call that checks, and potentially activates some kind of globally shared lock. While I've dealt with and read about several forms of interprocess locking on Linux before, I'm drawing a blank on what to calls to look for. Currently my only suspect is futex() which comes up very early on in the process' execution. Update0 There is some confusion about what I'm after. I'm monitoring an existing process for calls to persistent interprocess memory or equivalent. I'd like to know what system and library calls to look for. I have no intention call these myself, so naturally futex() will come up, I'm sure many libraries will implement their locking calls in terms of this, etc. Update1 I'd like a list of function names or a link to documentation, that I should monitor at the ltrace and strace levels (and specifying which). Any other good advice about how to track and locate the global lock in mind would be great.

  Read the article

• Why doesn't SuperGenPass work on some sites when I use Chrome?

  - by Lunatik

  Bookmarklet SuperGenPass sometime fails to popup when I click the bookmark in Chrome. It does however work when on the same page works in Firefox; an example is http://www.engadget.com/login This behaviour also replicated on a new Chrome tab (understandably, there is no domain), but some sites just fail to launch it meaning you have to go to another site, open it up, enter in [something] to get the 'Regenerate password' link, enter the domain manually then finally enter your master password to get the generated password! Something about the makeup of the page seems to make SuperGenPass think that it isn't able/required to popup. The FAQ doesn't make any mention of this fact, neither does a quick Google turn up anything that looks relevant. Does anyone else have the same issue? How can it be fixed? I'm on Windows using the current release of Chrome (5.x at the moment, but probably 18.x by the time you read this next week based on Google's seemingly logarithmic release numbering).

  Read the article

• Mysql Master-ColdMaster

  - by enedebe

  I explain my case: I'm at Amazon AWS and I want to be fault tolerant on a entire region failure. My basic problem is to have the db in sync with 2 regions. My options: Master-Master (high lag) Hand made sync every 5 minutes Master-ColdMaster?! (copy on the fly but Master won't wait the other region commit) In my system we could afford loosing a piece of data (we're not a bank) the last inserts in the db, but we could not afford more than 10 minutes of downtime. The database is small and the level of inserts is low, and I wouldn't affect the normal usage waiting other region commit. Is the 3 solution posible? And the most important, once the primary fail how we can detect and change the rol between master-coldmaster -- coldmaster-master ? Is there any clean-mode to restore between failure? Thank's!

  Read the article

• NginX : Route user request to backend

  - by xperator

  The goal is to have NginX webserver act as a very basic & simple load balancer/fail-over. But instead of fetching static files from backend and serving it to user, I just want to route/redirect user request to one of the back end servers. upstream backend { server server1.example.com:80; server server2.example.com:80; server server3.example.com:80; } location / { proxy_pass http://backend; } Instead of : User request (example.com/test.file) NginX LB Backend NginX LB User I want to have : User request (example.com/test.file) NginX LB Backend User Is this even possible with NginX ? If not then How can I achieve this goal. UPDATE 1: Is there a way to use rewrite directive with backend upstream ? UPDATE 2: It's not really necessary to use NginX. I just want to have a direct reply from backend to user.

  Read the article

• apache requests failing

  - by Josh

  I'm trying to figure out why sometimes the client fails to load objects/requests from a dynamic page served from Apache/MySql/Debian machine. Let's say 13 objects are to be loaded for a total of 185.3 KB load, with no external objects (no DNS lookups) and no other traffic at the same time, randomly some of those object do not load. However, if I perform a refresh, sometimes all of them load or some might fail again. I only have 1Mbps/up and my DNS is been hosted externally (everydns). What could be the reason of this issue? Any comments will be appreciated.

  Read the article

• Enable live streaming on website

  - by Somebody

  I have a server colocated in a datacentre (dedicated 1Gbit line, SSDs, etc.) running CentOS 5.4 64-bit. I want to stream live video from a device (webcam, camcorder, whatever.) to my server which inturn can re-broadcast it on demand through a flash player (such as Flowplayer) so that more users will be able to watch the stream since the server is quite fast. Does a solution like this exist already (streaming software from live source to flash media server) or will I need to hire someone to code it? I see that VLC has an option to stream video.. will that be suitable in this case? Or is there a better way to do it? I don't want a browser based solution on my end. It'll be great if this can be done without running an X server but I don't mind either way. This will be running on a dedicated PC at home.

  Read the article

• How do I associate server traffic to a domain hosted on that server?

  - by morley

  I have three or four Linux servers, each of which hosts anywhere from 5 to 50 domains. Each domain has its own folder: /www/projectname/web/ Logs go in: /www/projectname/log However, if there's a traffic spike (or, as I see it on my end, a memory usage spike), I'm not sure how to figure out which domain is responsible for the traffic without running tail -f on each of the projects and making an educated guess based on how fast things scroll. There's got to be a better way! There probably is, but I haven't seen it. And the last time I checked, bandwidth monitors only report system-wide load. So if anyone knows how to do this the right way, please let me know. Thanks!

  Read the article

• Laptop overheating within minutes of start up

  - by Spik330

  I have a Dell Windows 7 Home Prem with an I7-720QM. More information on the computer can be found here http://www.dell.com/support/home/us/en/04/product-support/servicetag/51CVCN1/configuration The Problem I am having is the computer will over heat unnaturally fast. From the time it takes from boot to when i can run my diagnostic tools which takes about two minutes the cpu temp is 86c after a few more minutes the cpu temp will reach 100 and the computer will black screen shut down. In total the the laptop can only be run for 3-5 minutes before completely shutting off. During this time there is nothing extensive running. After the laptop shuts down you have to wait for it to cool down or it will shut off even faster sometimes 7-15 seconds well still in the boot screen. Does anyone know what could be the problem maybe a sensor or is the computer fried?

  Read the article

• Which is prefered internet security + Antivirus solution for Windows, with good detection rate? [clo

  - by metal gear solid

  Possible Duplicate: Free antivirus solutions for Windows Which is the best internet security + Antivirus solution for Windows? free/opensource or commercial it doesn't matter I need best solution. Is Kaspersky best ? or any other? http://www.kaspersky.com/kaspersky_internet_security Award-winning technologies in Kaspersky Internet Security 2010 protect you from cybercrime and a wide range of IT threats: * Viruses, Trojans, worms and other malware, spyware and adware * Rootkits, bootkits and other complex threats * Identity theft by keyloggers, screen capture malware or phishing scams * Botnets and various illegal methods of taking control of your PC or Netbook * Zero-day attacks, new fast emerging and unknown threats * Drive-by download infections, network attacks and intrusions * Unwanted, offensive web content and spam

  Read the article

• Another question about ASP.NET MVC and a separate project for helper classes

  - by rockinthesixstring

  I know this topic has been discussed to death, but there is one thing that I can't wrap my head around. I'm working on a Web Application using ASP.NET MVC and I come across a scenario where I need a helper class (this usually happens in the early stages of development. So I go ahead and create a helper project in my solution that I use to manage all of my Helper Classes. Now, do I have to build that project and dump the dll in the bin directory every time I make changes to is, or is there a way to have the main web application reference the classes contained within the separate project without the separate build process? I'm just looking for the easiest way to add helper classes without the hastel of building and moving the dll every time I make a change or addition. Also, sorry for the very newbie-esque question here. All of the web apps I've build in the past have all been in the same project (web forms, App_Code, etc).

  Read the article

• Premature optimization is the root of all evil, but can it ever be too late?

  - by polygenelubricants

  "We should forget about small efficiencies, say about 97% of the time: premature optimization is the root of all evil" So what is that 3% like? Can the avoidance of premature optimization ever be taken too extreme that it does more harm than good? Even if it's rare, has there been a case of a real measurable software engineering disaster due to complete negligence to optimize early in the process? Bonus question: is software engineering pretty much the only field that has such a counter intuitive principle regarding doing something earlier rather than later before things potentially become too big a problem to fix? Personal question: how do you justify something as premature optimization and not just a case of you being lazy/ignorant/dumb?

  Read the article

• How useful is PXE booting?

  - by J. T.

  Hi All, How fast is booting over PXE?. Is it conceivable to boot a linux installation? Does it take a long time? I have never really looked into it at all, but I was considering setting up a compiler farm and thought this might be interesting to try. Does one have a main computer that the PXE answers to to get its image? Can you have multiple PXE images to pick from? Thanks!

  Read the article

• Various problems with software raid1 array built with Samsung 840 Pro SSDs

  - by Andy B

  I am bringing to ServerFault a problem that is tormenting me for 6+ months. I have a CentOS 6 (64bit) server with an md software raid-1 array with 2 x Samsung 840 Pro SSDs (512GB). Problems: Serious write speed problems: root [~]# time dd if=arch.tar.gz of=test4 bs=2M oflag=sync 146+1 records in 146+1 records out 307191761 bytes (307 MB) copied, 23.6788 s, 13.0 MB/s real 0m23.680s user 0m0.000s sys 0m0.932s When doing the above (or any other larger copy) the load spikes to unbelievable values (even over 100) going up from ~ 1. When doing the above I've also noticed very weird iostat results: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 1589.50 0.00 54.00 0.00 13148.00 243.48 0.60 11.17 0.46 2.50 sdb 0.00 1627.50 0.00 16.50 0.00 9524.00 577.21 144.25 1439.33 60.61 100.00 md1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 0.00 1602.00 0.00 12816.00 8.00 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 And it keeps it this way until it actually writes the file to the device (out from swap/cache/memory). The problem is that the second SSD in the array has svctm and await roughly 100 times larger than the second. For some reason the wear is different between the 2 members of the array root [~]# smartctl --attributes /dev/sda | grep -i wear 177 Wear_Leveling_Count 0x0013 094% 094 000 Pre-fail Always - 180 root [~]# smartctl --attributes /dev/sdb | grep -i wear 177 Wear_Leveling_Count 0x0013 070% 070 000 Pre-fail Always - 1005 The first SSD has a wear of 6% while the second SSD has a wear of 30%!! It's like the second SSD in the array works at least 5 times as hard as the first one as proven by the first iteration of iostat (the averages since reboot): Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 10.44 51.06 790.39 125.41 8803.98 1633.11 11.40 0.33 0.37 0.06 5.64 sdb 9.53 58.35 322.37 118.11 4835.59 1633.11 14.69 0.33 0.76 0.29 12.97 md1 0.00 0.00 1.88 1.33 15.07 10.68 8.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 1109.02 173.12 10881.59 1620.39 9.75 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.41 0.01 3.10 0.02 7.42 0.00 0.00 0.00 0.00 What I've tried: I've updated the firmware to DXM05B0Q (following reports of dramatic improvements for 840Ps after this update). I have looked for "hard resetting link" in dmesg to check for cable/backplane issues but nothing. I have checked the alignment and I believe they are aligned correctly (1MB boundary, listing below) I have checked /proc/mdstat and the array is Optimal (second listing below). root [~]# fdisk -ul /dev/sda Disk /dev/sda: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00026d59 Device Boot Start End Blocks Id System /dev/sda1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sda2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sda3 4605952 814106623 404750336 fd Linux raid autodetect root [~]# fdisk -ul /dev/sdb Disk /dev/sdb: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dede Device Boot Start End Blocks Id System /dev/sdb1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sdb2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sdb3 4605952 814106623 404750336 fd Linux raid autodetect /proc/mdstat root # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdb2[1] sda2[0] 204736 blocks super 1.0 [2/2] [UU] md2 : active raid1 sdb3[1] sda3[0] 404750144 blocks super 1.0 [2/2] [UU] md1 : active raid1 sdb1[1] sda1[0] 2096064 blocks super 1.1 [2/2] [UU] unused devices: Running a read test with hdparm root [~]# hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 664 MB in 3.00 seconds = 221.33 MB/sec root [~]# hdparm -t /dev/sdb /dev/sdb: Timing buffered disk reads: 288 MB in 3.01 seconds = 95.77 MB/sec But look what happens if I add --direct root [~]# hdparm --direct -t /dev/sda /dev/sda: Timing O_DIRECT disk reads: 788 MB in 3.01 seconds = 262.08 MB/sec root [~]# hdparm --direct -t /dev/sdb /dev/sdb: Timing O_DIRECT disk reads: 534 MB in 3.02 seconds = 176.90 MB/sec Both tests increase but /dev/sdb doubles while /dev/sda increases maybe 20%. I just don't know what to make of this. As suggested by Mr. Wagner I've done another read test with dd this time and it confirms the hdparm test: root [/home2]# dd if=/dev/sda of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 38.0855 s, 282 MB/s root [/home2]# dd if=/dev/sdb of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 115.24 s, 93.2 MB/s So sda is 3 times faster than sdb. Or maybe sdb is doing also something else besides what sda does. Is there some way to find out if sdb is doing more than what sda does? UPDATE Again, as suggested by Mr. Wagner, I have swapped the 2 SSDs. And as he thought it would happen, the problem moved from sdb to sda. So I guess I'll RMA one of the SSDs. I wonder if the cage might be problematic. What is wrong with this array? Please help!

  Read the article

• Dell replacement return

  - by terrani

  Hi, I am not sure if I can ask this question here. Please let me know if my question is not suitable here. I just received my replacement monitor from dell. While I was talking to dell tech., he told me that Dell would charge me for the replacement monitor if I fail to return my defective monitor within 15 days. I don't know why he told me that when I didn't ask it. so here is my question. How are they going to charge me?? Dell does not have my credit card or bank account info. Do they store my credit card or bank account information on their database???

  Read the article

• Is an eee-pc with an Atom N550 dual core OK for Rails 3 development?

  - by dan

  I'm buying an Asus eee-pc 1015PEM and hope to do test-driven Rails 3 development on it. Is the CPU fast enough or too painfully slow for this? I plan on installing Ubuntu. I currently develop on a 11 inch Macbook Air 2010 model. It works fine as a Rails development machine. But for some reason I'm drawn to developing on a cheap little netbook. I don't use any IDE's, and my development workflow is mostly switching between Vim, Gnu Screen, and bash.

  Read the article

• rsync - how to set/keep directory permissions?

  - by Dylan

  I'm using CwRsync to connect from my Windows development machine to a linux webserver : rsync -avuz -e ./ssh --exclude=".svn" /cygdrive/c/xampp/htdocs/project123/ [email protected]:/home/user123/public_html This syncs my development project directory nicely and fast to the server. But after doing this, all directory properties are reset to the local user 'user123' only, so the website is not available anymore. I need to manually reset those properties. Why is this happening, and how to prevent it? PS. coming from a Windows environment I'm having a really hard time understanding rsync. I copied the above command from some examples... just need to get this one small thing working too...

  Read the article

• Lexing newlines in scala StdLexical?

  - by Nick Fortescue

  I'm trying to lex (then parse) a C like language. In C there are preprocessor directives where line breaks are significant, then the actual code where they are just whitespace. One way of doing this would be do a two pass process like early C compilers - have a separate preprocessor for the # directives, then lex the output of that. However, I wondered if it was possible to do it in a single lexer. I'm pretty happy with writing the scala parser-combinator code, but I'm not so sure of how StdLexical handles whitespace. Could someone write some simple sample code which say could lex a #include line (using the newline) and some trivial code (ignoring the newline)? Or is this not possible, and it is better to go with the 2-pass appproach?

  Read the article

• Lingering database-connections from Feng Office

  - by Bobby

  I've installed Feng Office on our main server which is working perfectly so far. Unfortunately it seems like there's a problem with the connection to the MySQL-Database. While the connection itself works fine, it's the reuse/pooling of connections which seems to be bugged. There are lingering/sleeping connections to the server from Feng Office which won't close and don't get reused after some time (120 seconds). Of course those lingering processes/connections are piling up pretty fast. I've found a thread at the forums about this behavior, but the suggested fix is already applied (by default). I'm sure this is just a configuration issue, but I'm a little clue less because Feng is besides a MediaWiki, a DokuWiki and homebrewed PHP applications the only one with this issue. The setup is a Microsoft Windows 2003 Server with MySQL 5.0.26 and Apache 2.2. Where can I start looking for clues why this is happening and how do I get rid of lingering MySQL-Connections?

  Read the article

• Ubuntu: Alternative task-switcher to what is provided in compiz

  - by user22106

  I'm running Ubuntu 11.04 and really enjoying it. The task switcher default in Ubuntu shows a list of small icons for each running app much like the windows task switcher. It's fast and effective. I enabled Compiz and noticed that the task switcher changed to one with small thumbnails showing a smaller version of each window. Nice, but it slows the task manager down to about 0.5 seconds to display, which for me is far too long. Have googled the forums and it's a very common problem with ubuntu/compiz. I want to run compiz as it provides so many other features, but the slow task switcher is just not going to run with me. So was wondering if there is some way of NOT letting compiz override the task switcher, or, if there is some other task switcher that I can install which will not be slow like the compiz one. Any help would be appreciated.

  Read the article

• 32 vs 64-bit software for same machine?

  - by GorillaSandwich

  What is the difference between 32 and 64-bit software? My understanding is that 64-bit can use more RAM, if it's available, because it has a larger address space for it. Is this correct? And, specifically: If I have a 64-bit operating system with lots of RAM, and I install, say, the 32-bit version of MySQL instead of the 64-bit version, will it be unable to use all the available RAM and therefore run slower than the 64-bit version might on the same machine (assuming RAM becomes the bottleneck before processing speed or disk access speed or whatever)? If I have a 32-bit operating system and I install a 64-bit piece of software on it, will it (probably) fail to run?

  Read the article

• Plesk 9 - unable to modify atmail vhost template

  - by Ben

  Running into a small issue recently that causes my server's atmail to fail authenticating users. I gathered from a web search that it's because i recently enabled apc on the server. I've found some reference mentioning I need to modify the atmail vhost template, but that reference is for Plesk 10 (i'm on 9). The atmail config isn't in the same spot. I've found this unrelated topic that explains how to modify the vhost settings for atmail on plesk 9, which I have done (adding php_admin_flag apc.enabled off to it). I then recompiled the server config using /usr/local/psa/admin/bin/websrvmng -a but it doesn't seem to pick up the changes. If I look at /etc/httpd/conf.d/zzz_atmail_vhost.conf after recompiling it still doesn't show the apc settings. Summary of steps taken: Modified /etc/psa-webmail/atmail/atmail_vhost.conf and added php_admin_flag register_globals off to the config Recompiled with /usr/local/psa/admin/bin/websrvmng -a Checked /etc/httpd/conf.d/zzz_atmail_vhost.conf But no changes. What am I missing?

  Read the article

• Can't connect to IIS7 on one of my machines

  - by user38974

  Hello, I have 2 computers, both running Win7 Professional x64. Computer "A" (192.168.0.10) is my work machine, it contains my tools etc. Computer "B" (192.168.0.15) is supposed to be my build server / web server for my projects I've installed IIS on "B", and installed IIS7 remote manager on "A". I'm trying to connect from A's IIS7 Manager to B's IIS but I fail. I have little knowledge of IIS, and I feel that's the main reason. I can ping B from A and get positive results so the machines do see each other. A and B are in the same workgroup but not in a domain (if that matters) - they're in my home network. What do I need to do to "see" B's IIS?

  Read the article

• App engine downtime

  - by DutrowLLC

  I've noticed that google app engine seems to have a fair amount of downtime where they place the datastore into read-only mode. Frequently this downtime is in the middle of the day. Is this something that is happening only during early development, or is this something that I can expect to be always be occurring? I've developing an application that helps small businesses handle their operations. One thing that it does is take appointments, another is route phone calls. I'd like some suggestions on how to handle times when the datastore is in read-only such as: What if our client is on the phone with the customer and is taking down an appointment and the datastore is in read-only? It would not be acceptable to ask the client to come back later to save, especially if its in the middle of the day. What if there is an incoming call and the application can not store the record or properly route the call due to database writes being unavailable? How are these types of issues normally handled?

  Read the article

• Logitech Mouse stopped working after changing batteries!

  - by Martti Laine

  I just changed batteries for my optical wireless Logitech mouse, but it stopped working; When I put it on, it waits a second and then keeps the green light for few seconds. After that it just stops responding and doesn't show the light even if I'm moving it. Does this have something to do with batteries? I took new, so they're not empty. And I think it cannot be on batteries, because it keeps the light first, but then just stops responding. Please help, I would be very very thankfull. This makes me mad to use this mousepad :D EDIT: Wow, what an fast answer!! Thank you, but you wanted to know this mouse? I think it's Logitech M205, watched from Logitech site, because have not the original package anymore :S I couldn't find any buttons in receiver, but mouse has button called "reset". Is that the right one?

  Read the article

< Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >