Search Results

Search found 17314 results on 693 pages for 'vpn setup'.

Page 221/693 | < Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >

• Router and Switch VLAN Configuration for Isolated Network

  - by Ben

  I haven't worked with VLANs much in the past and I was hoping if I could get a good explanation of what I need to setup for this to work. I have a Netgear WNR2000v2 router and a Netgear GS108T smart switch currently in my network. The fourth port on the router connects to port one on the switch. I would like to be able to isolated port 8 on the switch for use as a "guest port" when I bring home malware infested PCs for repair. I figured the VLAN capabilities of the GS108T would be able to do this for me, but I think I have a misunderstanding of how the VLAN actually works. Port 8 needs internet access but should not be able to communicate with the rest of the PCs on the home network. The subnet for the home network is 192.168.1.0/24 and I would like the guest PC to have A) 192.168.1.64 or B) 192.168.2.2. I am reading a lot of stuff about port trunking and VLAN membership, but I am confused as to which setup needs to be in place to make this work. Any help is greatly appreciated! Let me know if there is more information I need to provide. Definitely looking to learn something from this project. Thanks!

  Read the article

• Cannot activate windows 7

  - by Charlie

  I can't activate Windows 7, I get an error saying DNS name does not exist. Is something configured incorrectly somewhere? PS: I need the answer within 13 days ;) UPDATE: I had upgraded from my company's Windows Vista build, and when I connect to the company VPN and activate I get a different error: The Software Licensing Service reported that the computer could not be activated. No Key Management Service (KMS) could be contacted. Please see the Application Event Log for additional information. The Application Event Log contains this (I took out the server name, it's one of the company servers): The client has sent an activation request to the key management service machine. Info: 0xC004F042, 0x00000000, xxxxxxxxxxxxxxxxxxxxxxxxx.com:1688, 7fbdc9b7-d654-49ed-80a7-81a34408f8dc, 2009/09/01 10:59, 0, 2, 17880, ae2ee509-1b34-41c0-acb7-6d4650168915, 25

  Read the article

• Overclock Failed

  - by John

  This morning when I tried to turn on my computer, the monitor would not display anything. The computer is on, but no UI on the monitor and no beep. I turned off the computer and turn it back on again. This time, the computer was on for about 2 seconds and automatically turned itself off for about 2 second and automatically turned itself back on. This happened two times without the monitor displaying any UI. On the third try, the computer did the same thing but when it turned itself back on, the monitor displayed this: American Megatrends Asus P8P67 Le ACPI bios Revision 1011 CPU Intel Core i5 2500K CPU @ 3.30GHz Speed: 3300MHz Total Memory 4096 MB (DDR3-1333) USB Devices Total: 0 Drive, 1 Keyboard, 1 Mouse, 2 Hubs Detected ATA/ATAPI Deivces SATA6G_2 Hitachi HDs821010CLA 332 SATA3G_1 Corsair force 3 SSD SATA3G_2 HL-DT-ST DB-RE UH12CS28 Overclocking Failed! Please enter setup to reconfigure your system. Press F1 to Run Setup. After I pressed F1, it went into the Asus EF1 Bios Utility. I couldn't do anything in there so I just exited. After which, the computer auto turned off and on again and I was able to use the PC like regular. This has never happened to this computer before and the day before, nothing seemed wrong, just regular use and some gaming.

  Read the article

• Domain connection shows as "unauthenticated"

  - by gareth89

  I have seen various different questions for this problem floating around but either the circumstances arent the same or the solution doesnt work so thought i would post it to see if anybody has any suggestions. Various domain PCs and laptops appear to randomly give the connection name of "lewis.local 2(Unauthenticated)" - lewis.local being our domain - and provides an exclamation mark where the network type logo is normally shown. This also appears to happen every time connecting via vpn. Our setup is: 2 servers both running windows server 2003 R2 (x32) main server has AD, DNS and DHCP installed IPv4 on approx 30 client machines (some wired, some wireless) If anybody has any thoughts on solutions i would appreciate it. I have tried removing all but AD server roles, resetting all of the systems and nothing. It doesnt prevent anything from working just like a domain connection most of the time however it is getting fustrating! Also dont know if it could have anything to do with it but the DHCP server seems to have quite a long lead time on issuing the IP address to the client.

  Read the article

• SQL 2008 Replication corrupt data problem

  - by Jonathan K

  We took a SQL 2000 database. Took a lightspeed backup. Restored on SQL 2008 active/passive cluster. Then setup replication to replicate the data back to SQL 2000. So 2008 is the publisher/distributor, and 2000 is doing a pull subscription. Everything works well, execpt we occassionally get corrupt data in varchar/text fields on the subscriber. So for example we have a table with 4500 records. When we run this statement: update MedstaffProvider set Notes = 'Cell Phone: 360.123.4567 Answering Service: 360.123.9876' where LastName = 'smith' The record in the 2008 database is updated as expected. But in the subsriber datbase we'll get gibberish in the notes field: óPÌ[1] T $Oé[1] ð²ñ. K Here's what we know: This is repeatable, meaning we can run that same query all day long and get the same gibberish. If you alter update statement slightly the data gets replicated just fine. The collation on both databases is the same. So far we've only detected the problem with text/varchar fields. (The notes field above is text). Only one or two records in a table are impacted. The table structure looks identical in both 2000/2008. We haven't made any changes. We have found one solution that fixes the problem. Basically if we recreate the table in 2008 (say as MedStaffProvider2) and then insert all the data. Drop the original table. Rename the table to it's original name. Setup replication again. And run the exact same update statement it works as expected. Does anyone have any idea what might be happening here? Or are there any other techniques we can use to troubleshoot this? I've found a solution for this, but would really like to undertsand why this is happening.

  Read the article

• ownCloud WebDAV interface seems to be broken

  - by Nobleleader13245

  I've been trying to host ownCloud on my server but everytime I try to it tells me this : Your web server is not yet properly setup to allow files synchronization because the WebDAV interface seems to be broken. Please double check the installation guides. This is my setup : Windows Server 2012 R2 IIS 8.5 PHP 5.5.11 ownCloud 6.0.3 MySQL 5.6.17 I tried google the error but I can't seem to find anything usefull. Some say I should try if this works : [hostname]/remote.php/webdav/ and yes I can navigate to this folder and I can open files from there. The calendar works and I can also just upload files the web version of ownCloud the only thing that doesn't seem to work is the sync client. The sync client doesn't say anything it just doesn't connect (Screenshot : http://prntscr.com/3p2apz) This is the error log : Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:56:00+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:47+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:37+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:51:24+00:00 This is my php.ini : http://pastebin.com/es3MB8Uh Does anyone have any idea on how I should get this to work? I've been trying to get this to work for about 14 days now and it starts to annoy me =P

  Read the article

• ownCloud WebDAV interface seems to be broken

  - by Nobleleader13245

  I've been trying to host ownCloud on my server but everytime I try to it tells me this : Your web server is not yet properly setup to allow files synchronization because the WebDAV interface seems to be broken. Please double check the installation guides. This is my setup : Windows Server 2012 R2 IIS 8.5 PHP 5.5.11 ownCloud 6.0.3 MySQL 5.6.17 I tried google the error but I can't seem to find anything usefull. Some say I should try if this works : https://cloud.mcsoftworks.net/remote.php/webdav/ and yes I can navigate to this folder and I can open files from there. The calendar works and I can also just upload files from here https://cloud.mcsoftworks.net/ the only thing that doesn't seem to work is the sync client. The sync client doesn't say anything it just doesn't connect (Screenshot : http://prntscr.com/3p2apz) This is the error log : Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:56:00+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:47+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:37+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:51:24+00:00 This is my php.ini : http://pastebin.com/es3MB8Uh Does anyone have any idea on how I should get this to work? I've been trying to get this to work for about 14 days now and it starts to annoy me =P

  Read the article

• Dynamic nginx domain root path based on hostname?

  - by Xeoncross

  I am trying to setup my development nginx/PHP server with a basic master/catch-all vhost config so that I can created unlimited ___.framework.loc domains as needed. server { listen 80; index index.html index.htm index.php; # Test 1 server_name ~^(.+)\.frameworks\.loc$; set $file_path $1; root /var/www/frameworks/$file_path/public; include /etc/nginx/php.conf; } However, nginx responds with a 404 error for this setup. I know nginx and PHP are working and have permission because the localhost config I'm using works fine. server { listen 80 default; server_name localhost; root /var/www/localhost; index index.html index.htm index.php; include /etc/nginx/php.conf; } What should I be checking to find the problem? Here is a copy of that php.conf they are both loading. location / { try_files $uri $uri/ /index.php$is_args$args; } location ~ \.php$ { try_files $uri =404; include fastcgi_params; fastcgi_index index.php; # Keep these parameters for compatibility with old PHP scripts using them. fastcgi_param PATH_INFO $fastcgi_path_info; fastcgi_param PATH_TRANSLATED $document_root$fastcgi_path_info; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; # Some default config fastcgi_connect_timeout 20; fastcgi_send_timeout 180; fastcgi_read_timeout 180; fastcgi_buffer_size 128k; fastcgi_buffers 4 256k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; fastcgi_intercept_errors on; fastcgi_ignore_client_abort off; fastcgi_pass 127.0.0.1:9000; }

  Read the article

• Secure external connection to SQL Server (from third party software)

  - by Bart

  I have a SQL Express 2008 R2 server running on a server in an internal lan network. A few databases are used by some third party software to store data. A SQL-Server user is used by this application to connect to the database. Now I need to access this database using a local installation of the software from an external pc. In this particular case a VPN connection is not the solution I am looking for. I have access to an external linux server, so I tried ssh tunneling from the windows server to the linux server and use the external pc to tunnel it back from the linux server to the client, but this is working very very slow. What are my other options to allow this external connection in a safe way?

  Read the article

• Setting up a dualboot by installing cloned partitions using clonezilla

  - by Nimjox

  I'm trying to setup a dual boot system where I have Windows 7 and Linux Mint. Here's the kicker both are partitions I've saved using Clonzezilla from different places and to make matters worse Linux Mint is formated as a LVM. I need both of these images specifically as windows is a corporate image that I must use and the other is a development image that took me a week to setup. I've gotten it almost all working but my issue is that I can't get clonezilla to not mess up the partition table of Windows when installing Mint or vise-vera. I can use the (-k1 option) which doens't copy the partition table but then I have a unusable partition when it clones and I'm not sure how to fix the partition table. Here's what I'm doing: Using Gparted to make partitions sda1 40GB ntfs (windows), sda2 extended 70GB, sda5 lvm2 pv 69.99 GB (Linux), sda3 500MB (GRUB) Clonezilla windows image into sda1 partition (keeping partition table) Clonezilla linux image into sda5 partition (not recreating partition table) After all that I can boot into windows using the default MBR. I can use rescue-repair cd to reinstall GRUB which will see Windows 7 but I can't get it to see the Linux OS. I'm thinking its because of the sda5 partition but I'm not sure any ideas on what I could do to get this working or where I might be going wrong. If there is any additional detail you need please let me know and I'll edit as this is a lot.

  Read the article

• How-To Configure Weblogic, Agile PLM and an F5 LTM

  - by Brian Dunbar

  Agile, Weblogic, and an F5 walk into a bar ... I've got this Agile PLM v 9.3 Running on WebLogic, two managed servers. An F5 BigIP LTM. We're upgrading from Agile v 9.2.1.4 running on OAS. The problem is that while the Windows client works fine the Java client does not. My setup is identical to one outlined in F5's doc: http://www.f5.com/pdf/deployment-guides/bea-bigip45-dg.pdf When I launch the java client it returns this error "Server is not valid or is unavailable." Oracle claims Agile PLM is setup correctly, but won't comment on the specifics of the load balancer. F5 reports the configuration is correct but can't comment on the specifics of the application. I am merely the guy in a vortex of finger-pointing who wants my application to work. It's that or give up on WLS and move back to OAS. Which has it's own problems but at least we know how it works. Any ideas?

  Read the article

• Re-configure Office 2007 installation unattended: Advertised components --> Local

  - by abstrask

  On our Citrix farm, I just found out that some sub-components are "Installed on 1st Use" (Advertised), which does play well on terminal servers. Not only that, but you also get a rather non-descriptive error message, when a document tried to use a component, which is "Installed on 1st Use" (described on Plan to deploy Office 2010 in a Remote Desktop Services environment): Microsoft Office cannot run this add-in. An error occurred and this feature is no longer functioning correctly. Please contact your system administrator. I have ~50 Citrix servers where I need to change the installation state of all Advertised components to Local, so I created an XML file like this: <?xml version="1.0" encoding="utf-8"?> <Configuration Product="ProPlus"> <Display Level="none" CompletionNotice="no" SuppressModal="yes" AcceptEula="yes" /> <Logging Type="standard" Path="C:\InstallLogs" Template="MS Office 2007 Install on 1st Use(*).log" /> <Option Id="AccessWizards" State="Local" /> <Option Id="DeveloperWizards" State="Local" /> <Setting Id="Reboot" Value="NEVER" /> </Configuration> I run it with a command like this (using the appropriate paths): "[..]\setup.exe" /config ProPlus /config "[..]\Install1stUse-to-Forced.xml" According to the log file, the syntax appears to be accepted and the config file parsed: Parsing command line. Config XML file specified: [..]\Install1stUse-to-Forced.xml Modify requested for product: PROPLUS Parsing config.xml at: [..]\Install1stUse-to-Forced.xml Preferred product specified in config.xml to be: PROPLUS But the "Final Option Tree" still reads: Final Option Tree: AlwaysInstalled:local Gimme_OnDemandData:local ProductFiles:local VSCommonPIAHidden:local dummy_MSCOMCTL_PIA:local dummy_Office_PIA:local ACCESSFiles:local ... AccessWizards:advertised DeveloperWizards:advertised ... And the components remain "Advertised". Just to see if the installation state is overridden in another XML file, I ran: findstr /l /s /i "AccessWizards" *.xml Against both my installation source and "%ProgramFiles%\Common Files\Microsoft Shared\OFFICE12\Office Setup Controller", but just found DefaultState to be "Local". What am I doing wrong? Thanks!

  Read the article

• Invalid domains in DNS don't work on mac/*nix like systems

  - by David Mulder

  At work we use domains like abc-01, which work fine on windows. Whilst developing mobile applications we already saw that this doesn't work on both iOS and android which we fixed for a few specific domains (by setting the dns up that abc-01.def.local also works in those) and was assumed to be caused by it being an invalid domain. Now however it's necessary to connect through VPN from a mac and changing all relevant domains is not an option at the moment (far too many of them and would require changing the settings of far too many applications), so I was hoping whether somebody knows a trick or setting to get this to work on mac (or even linux in general).

  Read the article

• Laptop will not boot

  - by WillumMaguire

  This is a dell studio 1558 laptop. Now, something is wrong with the charger that it won't charge the laptop, but the laptop can turn on and operate properly as long as it is attached. It has been like this for a while, but it's not the problem. My problem is that as of yesterday, It takes several minutes to get past the "dell" startup logo (where is says "f2 setup" and "f12 boot options"). After it gets past, it beeps as normal to tell me about the charger and gives me the f2/f12 options and f1 to continue as normal. I can press f12 to get into boot options and load into my live USB BackTrack 5 ISO, but after "startx" it just stays at a black screen. I can also access BIOS setup, but see nothing that would help the problem. When I boot to the HDD, it gives me this Intel UNDI, PXE-2.1 (build 083) Realktek PCIe GBE Family Controller Series V.2.29 (06/30/09) PXE-E61: Media test failure, check cable PXE-M0F: Exiting PXE ROM Operating System not found Also, pressing f8 gives me the same results as booting as normal. It is running Windows 7 Ultimate, dual-core Intel i3 @ 2.27ghz and 4gb RAM. I think there is an issue with the HDD, as the "Operating System not found" would lead me to believe. Is this a fixable problem?

  Read the article

• postfix concurrency limit with round robin dns

  - by goose

  Take the following internal round robin dns setup mymta.com. IN A 172.31.1.1 mymta.com. IN A 172.31.1.2 mymta.com. IN A 172.31.1.3 mymta.com. IN A 172.31.1.4 mymta.com. IN A 172.31.1.5 mymta.com. IN A 172.31.1.6 mymta.com. IN A 172.31.1.7 mymta.com. IN A 172.31.1.8 mymta.com. IN A 172.31.1.9 mymta.com. IN A 172.31.1.10 Now assume the following postfix setup (assume these are the only tweaks from defaults in debian package) main.cf: smtp_connection_cache_destinations = mymta.com smtp_connection_cache_reuse_limit = 750 smtp_destination_concurrency_limit = 75 transport * :[mymta.com] I would expect 75 concurrent connections spread across the 10 A records I've set in DNS. However I'm seeing more than a few hundred connections to mymta.com and I'm wondering if Postfix is "smart" enough to set up 75 concurrent connections for each IP address. Thoughts?

  Read the article

• Thunderbird alerts when expected email does not arrive

  - by user871199

  I am on Ubuntu 12.04 using Thunderbird as email client. Both are up to date in terms of updates. I have bunch of nightly jobs that do the work and send a status mail. It gets tedious if you keep getting same/similar mails every day so I ended up writing a mail filter rule which causes emails to end up in their respective folders automatically. If things are going ok, I really don't need to read emails. Failure emails are sent to different alias - if the job runs. We recently discovered that one of the job had not run for few days as someone accidentally disabled it. In order to avoid such problems in future, I would like to setup thunderbird in such a way that if I don't get email from given address within given duration, it should alert me. My dream solution is to set up frequency - some jobs do run every 4 hours. Is this possible? Can I setup Thunderbird (preferred) or other email client for reminding me when expected email does not show up. Based on comments and answer I received, here are the reasons why I would like to use Thunderbird. We are already using Thunderbird. It has calender support via plugin, so I suppose someone is already watching time to remind us about the event. May be this another type of event. Additional job is one more failure point, may complicate life if it has to monitor multiple hosts. Additional tools - same thing, one more failure point. Thunderbird can be run across all the platforms we are using - Windows and Ubuntu. It sort of becomes platform independent solution.

  Read the article

• Connectiong adsl router/modem and router with bridgemode

  - by Zvonko Telefonko

  I have one adsl modem/router which is not "top" of the line and it lack allot of options which I need. I was able to acquire one Cisco router recently which has all options that I need ( like DMZ, VPN, port forwarding, etc). I'm interested, if I connect the old modem/router to new Cisco router using bridge mode, will I be able to use all the features on the Cisco? For instance, the old router is lacking of port forward options. Does this mean that I will not be able to use port forwarding on Cisco router either or, since I will be using bridge mode, this will not affect Cisco router and it will work as the modem is in him? thank you

  Read the article

• Optimum configuration of McAfee for Servers

  - by Wayne Arthurton

  Our corporate standard is McAfee Enterprise, unfortunately this is non-negotiable. On two types of servers I'm responsible for, SQL & Web, we have noticed major performance issues with the corporate standard setup. Max scan time 45sec One policy for all processes Scan ALL files on write, read and open for backup Heuristics: Find unknown programs, trojans and macros Detect unwanted programs Exclude: EVT, LDF, LOG, MDF, VMD, , windows file protection) This of course still causes major slowdowns. IIS .NET recompiles are slow especially with SharePoint, SQL backups and restores, SQL Analysis Services, Integration Services and temp data from them as well. I have looked from time to time, for some best practices on setting up McAfee of SQL & SQL Analysis Service, SQL Integration Service, Visual Studio, Sharepoint, and .NET web servers in general. How do people setup McAfee enterprise on their corporate serves keeping security intact, but affecting performance as minimally as possible? Has anyone run across white papers on these setups? Obviously some are case by case, but there must be some best practices out there somewhere.

  Read the article

• How to get my W2003-server (back) into the web (after setting up bridged networking)

  - by MBaas

  I have recently set up Virtualbox on a W2003-Server (which is also used as webserver, accessed from the web). My vbox worked nicely, but then I wanted more, I wanted to have the vm appear in the intranet like any ordinary pc. I was advised to setup bridged networking as opposed to NAT. I did so, and in the server's network connections have bridged the LAN-Connection and the "VirtualBox Host-Only Network" (yes, it says "host only network", but I assure that VBox networking is configured to use network bridge). So now my VM is visible in the intranet and it also has www-accesss, the server can also access the web. The only problem that came up is that the server is no longer accessible from the web. I've traced an HTTP-Request and it says "Can't connect to *:80 (connect: No route to host)". So maybe something in the router's config needs to be adjusted (yeah, well, the server's IP-Address changed from 192.168.1.199 to ...198). So I went into the router-config, reviewed port-forwarding for port 80 and adjusted the IP there, but it still didn't work. Unsure if it was a router-problem or rather something in the server's config, I've setup a "demilitarized zone" in the router and have put the server into it. (My understanding is that this would put the server straight into the web...) But the result of the HTTP-Requests is still the same :(

  Read the article

• Postfix Relay to Office365

  - by woodsbw

  I am trying to setup a Postfix server on a Linux box to relay all mail to our Office365 (Exchange, hosted by Microsoft) mail server, but, I keep getting an error regarding the sending address: BB338140DC1: to= relay=pod51010.outlook.com[157.56.234.118]:587, delay=7.6, delays=0.01/0/2.5/5.1, dsn=5.7.1, status=bounced (host pod51010.outlook.com[157.56.234.118] said: 550 5.7.1 Client does not have permissions to send as this sender (in reply to end of DATA command)) Office 365 requires that the sending address in the MAIL FROM and From: header be the same as the address used to authenticate. I have tried everything I can think of in the config to get this working. My postconf -n: append_dot_mydomain = no biff = no config_directory = /etc/postfix debug_peer_list = 127.0.0.1 inet_interfaces = loopback-only inet_protocols = all mailbox_size_limit = 0 mydestination = xxxxx, localhost.localdomain, localhost myhostname = localhost mynetworks = 127.0.0.0/8 recipient_delimiter = + relay_domains = our.doamin relayhost = [pod51010.outlook.com]:587 sender_canonical_classes = envelope_sender sender_canonical_maps = hash:/etc/postfix/sender_canonical smtp_always_send_ehlo = yes smtp_sasl_auth_enable = yes smtp_sasl_mechanism_filter = login smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_security_options = smtp_tls_CAfile = /etc/postfix/cacert.pem smtp_tls_loglevel = 1 smtp_tls_security_level = may smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes sender_canonical: www-data [email protected] root [email protected] www-data@localhost [email protected] root@localhost [email protected] Also, sasl_passwd is set to the correct credentials (tested them using swaks multiple times.) Authentication works, and sends the message when the from headers are correct (also tested using swaks....which works) The emails are coming from PHP, so I have also tried altering the sendmail path in php.ini to use pass the correct from address via -f So, for some reason, mail coming from www-data and root are not having the from fields rewritten to Office 365's satisfaction, and it won't send the message. Any postfix gurus out there that can help me setup this relay?

  Read the article

• Router failover not detecting outside interface link lost

  - by Matt

  Suppose I have two routers configured in master/slave configuration. They look something like this (addresses are not real ones) 123.123.123.10 <===> [eth0] Router 1 (10.1.1.2) [eth1] ===> +----------+ | 10.1.1.1 | ===> LAN 172.123.123.10 <===> [eth0] Router 2 (10.1.1.3) [eth1] ===> +----------+ The 10.1.1.1 is the default route for the Network (10.1.1.0). What's slightly different in this config to other's I've seen is that I don't have an external virtual IP. Also, the 10.1.1.1 addresses are in real life, public IP's (not private ones shown here). This is more of a router setup than a firewall setup so I'm not using NAT here. Now the issue that I'm having is that I can't see any way to configure UCARP or VRRP to monitor both eth0 & eth1 and fail over to the backup router should either of them go down. What I'm seeing is that if Router1 is the master and I unplug eth0 on router1, it doesn't fail over to router 2. However, it will if instead I unplug eth1 of router 1. In VRRP I see there is a cluster group, but it seems that for this to work you need to have virtual ip's or vrrp instances rather than actual interfaces assigned to it. I hope my explanation is clear. How do I get around this?

  Read the article

• Are there any negative impact running all services on a single static IP?

  - by Jake

  I need to setup a VPN trunk (with remote branch office location), Video Conference and Web Server on-premise in the office. I am used to ISP providing blocks of 8 or 16 IPs. But I have a new ISP which says they only can provide a single IP. Are there any issues with running all services on a single IP? I don't think this has any thing to do with bandwidth..? I'm not using SSL certificates... I can do port forwarding to different machines... What else...? Disclaimer: I am a programmer by training. Sorry for noob question.

  Read the article

• Choosing between cloud (Cloudfoundry ) and virtual servers - for developers

  - by Mike Z

  I just came across some articles on how to setup your own cloud using Cloudfoundry and Ubuntu, this got me thinking, choosing our infrastructure, if we want to use our own servers what's the advantage of cloud on virtual servers vs just using virtual servers, VPN? If we now develop for the cloud later if we need help we can quickly move on to a cloud provider, but other than that what's the advantage and disadvantage of private cloud in these areas? speed of development, testing, deployment server management security having an extra layer (cloud) will that have a hit on server performance, how big? any other advantage/disadvantage?

  Read the article

• APC Smart UPS network shutdown issue

  - by Rob Clarke

  Here is a bit about our setup: We have 2x Smart-UPS RT 6000 XL units with network management cards We are running Powerchute from a network server Powerchute is connected to the management cards of both UPSs UPSs are set to do a graceful shutdown via Powerchute when the battery duration is under 20 minutes We also have a command file that runs with Powerchute Although our setup is redundant we do not have an equal load on each server due to APC switches for single power devices The problem is that as we do not have an equal load on each server the batteries drain at different rates. This means that the UPSs both get to the specified low battery duration at completely different times. The problem here is that UPS 1 may have run down to 5 minutes and is in desperate need of initiating a Powerchute shutdown - UPS 2 still has 25 minutes of runtime so no shutdown is initiated. Consequently UPS 1 goes down and takes all the servers with and then shuts down UPS 2 as well! What we need to happen are 1 of either 2 things: Powerchute initiates the shutdown as soon as either UPS reaches the 20 minutes low battery duration setting - and doesnt wait for both The UPS with the heavier load expends its entire battery but does not shutdown both UPSs and lets the load be switched across to the UPS that still has runtime remaining. That way when the UPS that still has runtime reaches its low battery duration it can proceed with the graceful shutdown via Powerchute. Hope that makes sense, any help is greatly appreciated!

  Read the article

• AuthBasicProvider: failover not working when the first LDAP is down?

  - by quanta

  I've been trying to setup redundant LDAP servers with Apache 2.2.3. /etc/httpd/conf.d/authn_alias.conf <AuthnProviderAlias ldap master> AuthLDAPURL ldap://192.168.5.148:389/dc=domain,dc=vn?cn AuthLDAPBindDN cn=anonymous,ou=it,dc=domain,dc=vn AuthLDAPBindPassword pa$$w0rd </AuthnProviderAlias> <AuthnProviderAlias ldap slave> AuthLDAPURL ldap://192.168.5.199:389/dc=domain,dc=vn?cn AuthLDAPBindDN cn=anonymous,ou=it,dc=domain,dc=vn AuthLDAPBindPassword pa$$w0rd </AuthnProviderAlias> /etc/httpd/conf.d/authz_ldap.conf # # mod_authz_ldap can be used to implement access control and # authenticate users against an LDAP database. # LoadModule authz_ldap_module modules/mod_authz_ldap.so <IfModule mod_authz_ldap.c> <Location /> AuthBasicProvider master slave AuthzLDAPAuthoritative Off AuthType Basic AuthName "Authorization required" AuthzLDAPMemberKey member AuthUserFile /home/setup/svn/auth-conf AuthzLDAPSetGroupAuth user require valid-user AuthzLDAPLogLevel error </Location> </IfModule> If I understand correctly, mod_authz_ldap will try to search users in the second LDAP if the first server is down or OpenLDAP on it is not running. But in practice, it does not happen. Tested by stopping LDAP on the master, I get the "500 Internal Server Error" when accessing to the Subversion repository. The error_log shows: [11061] auth_ldap authenticate: user quanta authentication failed; URI / [LDAP: ldap_simple_bind_s() failed][Can't contact LDAP server] Did I misunderstand?

  Read the article

< Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >