Search Results

Search found 5810 results on 233 pages for 'staff of geeks'.

Page 222/233 | < Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >

  • McAfee ePolicy-Orchestrator (ePO) - policy ownership by groups?

    - by bkr
    Is there a way to grant ownership of an ePO policy to a group? Alternatively, is there a permission that can be set that would allow owners of an ePO policy to add other owners to that policy without making them ePO admin? In the case I'm looking at, ePO is deployed within a large heterogeneous organization with a large amount of delegation in the form of create/modify policy rights to allow multiple IT departments to customize to their needs for their sections of the system tree. The problem is that the policies are owned by the creator of the policy. This causes problems when they leave (staff turnover) or when other people on their teams need the ability to modify the existing policy. Unfortunately, as far as I can see, only someone who is an ePO admin can change the owners. Even the owner of the policy cannot add other owners (unless they are also an ePO admin). Ideally, I should be able to assign ownership of a policy to a group - since that would be easier to manage than me or another admin having to continually fix policy ownership or remove orphaned polices. Even just allowing the owners of the polices to add other owners would be sufficient. How are other people handling policy ownership when dealing with a large amount of delegated control of polices? Is there a way to delegate this out without making users full ePO admins?

    Read the article

  • Scripted redirection for Outlook 2003

    - by John Gardeniers
    We have a staff member in sales who has gone onto a 4 day week (getting ready for retirement), so each Thursday afternoon her email needs to be forwarded to another user and each Friday afternoon it needs to be set back. I'm using the VBS script below to do this, run via the Task Scheduler. Although the script appears to do it's job, based on what I see when I view the user's Exchange settings, Exchange doesn't always recognise that the setting has changed. e.g. Last Thursday the forwarding was a enabled and worked correctly. On Friday the script did it's thing to clear the forwarding but Exchange continued to forward messages all weekend. I found that I can force Exchange to honour the changed setting be merely opening and closing the user's properties in ADUC. Of course I don't want to have to do that. Is there a non-manual way I can have Exchange read and honour the setting? The script (VBS): ' Call this script with the following parameters: ' ' SrcUser - The logon ID of the suer who's account is to be modified ' DstUser - The logon account of the person to who mail is to be forwarded ' Use "reset" to clear the email forwarding SrcUser = WScript.Arguments.Item(0) DstUser = WScript.Arguments.Item(1) SourceUser = SearchDistinguishedName(SrcUser) 'The user login name Set objUser = GetObject("LDAP://" & SourceUser) If DstUser = "reset" then objUser.PutEx 1, "altRecipient", "" Else ForwardTo = SearchDistinguishedName(DstUser)' The contact common name objUser.Put "AltRecipient", ForwardTo End If objUser.SetInfo Public Function SearchDistinguishedName(ByVal vSAN) Dim oRootDSE, oConnection, oCommand, oRecordSet Set oRootDSE = GetObject("LDAP://rootDSE") Set oConnection = CreateObject("ADODB.Connection") oConnection.Open "Provider=ADsDSOObject;" Set oCommand = CreateObject("ADODB.Command") oCommand.ActiveConnection = oConnection oCommand.CommandText = "<LDAP://" & oRootDSE.get("defaultNamingContext") & ">;(&(objectCategory=User)(samAccountName=" & vSAN & "));distinguishedName;subtree" Set oRecordSet = oCommand.Execute On Error Resume Next SearchDistinguishedName = oRecordSet.Fields("DistinguishedName") On Error GoTo 0 oConnection.Close Set oRecordSet = Nothing Set oCommand = Nothing Set oConnection = Nothing Set oRootDSE = Nothing End Function

    Read the article

  • Allow members of a group to be unlocked by a specific account on AD

    - by JohnLBevan
    Background I'm creating a service to allow support staff to enable their firecall accounts out of hours (i.e. if there's an issue in the night and we can't get hold of someone with admin rights, another member of the support team can enable their personal firecall account on AD, which has previously been setup with admin rights). This service also logs a reason for the change, alerts key people, and a bunch of other bits to ensure that this change of access is audited / so we can ensure these temporary admin rights are used in the proper way. To do this I need the service account which my service runs under to have permissions to enable users on active directory. Ideally I'd like to lock this down so that the service account can only enable/disable users in a particular AD security group. Question How do you grant access to an account to enable/disable users who are members of a particular security group in AD? Backup Question If it's not possible to do this by security group, is there a suitable alternative? i.e. could it be done by OU, or would it be best to write a script to loop through all members of the security group and update the permissions on the objects (firecall accounts) themselves? Thanks in advance. Additional Tags (I don't yet have access to create new tags here, so listing below to help with keyword searches until it can be tagged & this bit editted/removed) DSACLS, DSACLS.EXE, FIRECALL, ACCOUNT, SECURITY-GROUP

    Read the article

  • Creating a Logical network diagram

    - by user273284
    Im a student and I have been assigned the task of creating a logical network diagram for the following scenario There are 2 buildings, the first is the head office and the second is the branch. The data centre is in the head office, it contains domain controller, mail server, file server and a web server. it provides wired and wireless access to the staff. the branch building is new and it does not have a network. The two buildings must be connected using a VPN connection. The branch building will not have any servers but just network devices that will provide the connectivity, the users in the branch building will be connected to the head office over the VPN. I had created a diagram based on this scenario, but my teacher rejected it saying that it does not follow Cisco hierarchical Model and the servers were not placed correctly in the diagram. I just wanted some help in this matter so that I Can create my network diagram correctly. If anyone could upload a picture of how the logical diagram should be for this scenario will be helpful, any other resources would also be great.

    Read the article

  • Adventures in Drupal multisite config with mod_rewrite and clean urls

    - by moexu
    The university where I work is planning to offer Drupal hosting to staff/faculty who want a Drupal site. We've set up Drupal multisite with clean urls and it's mostly working except for some weird redirects. If you have two sites where one is a substring of the other then you'll randomly be redirected to the other site. I tracked the problem to how mod_rewrite does path matching, so with a config file like this: RewriteCond %{REQUEST_URI} ^/drupal RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ /drupal/index.php?q=$1 [last,qsappend] RewriteCond %{REQUEST_URI} ^/drupaltest RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ /drupaltest/index.php?q=$1 [last,qsappend] /drupaltest will match the /drupal line and all of the links on the /drupaltest page will be rewritten to point to /drupal. If you put the end of string character ($) at the end of each rewrite condition then it will always match on the correct site and the links will always be rewritten correctly. That breaks down as soon as a user logs in though because the query string is appended to the url so just the base url will no longer match. You can also fix the problem by ordering the sites in the config file so that the smallest substring will always be last. I suggested storing all of the sites in a table and then querying, sorting, and rewriting the config file every time a Drupal site is requested so that we could guarantee the order. The system administrator thought that was kludgy and didn't address the root problem. Disabling clean urls should also fix the problem but the users really want them so I'd prefer to keep them if possible. I think we could also fix it by using an .htaccess file in each site to handle the clean url rewriting but that also seems suboptimal since it will generate a higher load on the server and the server is intended to host the majority of the university's external facing web content. Is there some magic I can do with mod_rewrite to get it to work? Would another solution be better? Am I doing something the wrong way to begin with?

    Read the article

  • Outbound ports to allow through firewall - core requirements

    - by dunxd
    This question was asked before, but in a rather general way. I'm asking more specifically based on my current requirements. We have a number of remote offices made up of a bunch of PCs and an ASA 5505 which is used as firewall and VPN termination point. In the offices we share the internet connection with one or more other organisations over whom we have very little control, asides from the config on the ASAs. For a bunch of reasons I'd like to lock down these ASA 5505s to only allow outbound traffic to ports used by applications we know we need. I'm putting a standard config to roll out to all the ASAs, and if we need to open up ports for the other orgs we can do it on request. But I want to leave open the most commonly required ports so we can get up and running without waiting on other folks technical staff to get back. I plan to allow the following TCP ports to support email and web access, which I know everyone will need: POP3 (110 and 995) HTTP (80 and 443) IMAP4 (143 and 993) SMTP (25 and and 465) The question really is, what other ports do I need to leave open to allow for "normal" working? I've seen UDP port 53 for DNS as one. Are there any others that would be worth opening up? Just to note - I'll also be setting up monitoring systems to keep an eye on the ports we do allow. Any of the above could be misused of course. We'll also back all this up with signed agreements. But I'm aiming for a technical solutions where I don't have to start out with the full requirements of everyone we share connections with. See also: outbound ports that are always open

    Read the article

  • Outbound ports to allow through firewall

    - by dunxd
    This question was asked before, but in a rather general way. I'm asking more specifically based on my current requirements. We have a number of remote offices made up of a bunch of PCs and an ASA 5505 which is used as firewall and VPN termination point. In the offices we share the internet connection with one or more other organisations over whom we have very little control, asides from the config on the ASAs. For a bunch of reasons I'd like to lock down these ASA 5505s to only allow outbound traffic to ports used by applications we know we need. I'm putting a standard config to roll out to all the ASAs, and if we need to open up ports for the other orgs we can do it on request. But I want to leave open the most commonly required ports so we can get up and running without waiting on other folks technical staff to get back. I plan to allow the following TCP ports to support commonly required resources: POP3 (110 and 995) HTTP (80 and 443) IMAP4 (143 and 993) SMTP (25 and and 465) The question really is, what other ports do I need to leave open to allow for "normal" working. I've seen UDP port 53 for DNS as one. Are there any others that would be worth opening up? Just to note - I'll also be setting up monitoring systems to keep an eye on the ports we do allow. Any of the above could be misused of course. We'll also back all this up with signed agreements. But I'm aiming for a technical solutions where I don't have to start out with the full requirements of everyone we share connections with. See also: outbound ports that are always open

    Read the article

  • Google Apps routing to different servers, depending on domain

    - by Philip
    We are investigating Google Apps for Education for our group of schools. Currently, each school uses their own Exchange (2003) server. Each school has its own domain which I have added to Google Apps as additional domains. I would like to start transitioning certain staff and some new pupils over to Google Apps to start testing. In this interim phase, I need mail to be routed through Google Apps and then, if no appropriate mail box is found, route on to the individual schools depending on the recipient. I do know that it is possible to route mail that does not have an appropriate Google Apps mail account to a single server - under "Settings / E-mail Settings / General Settings / Routing / E-mail routing". This works well for a single organisation where all the extra mail is destined for one place. I do know that it is possible to set up Routes, under "Settings / E-mail Settings / Hosts" and then use rules, found under "Settigns / E-mail Settings / General Settings / Routing / Receiving Routing". I can then filter based on e-mail domain and forward on to the necessary server. My problem with this, as I understand it, is that it ignores the users that have Google Apps accounts set up and sends all mail to the Exchange server. Are there any solutions for this predicament? Many thanks!

    Read the article

  • How do I find and kill a php loop (process)?

    - by Hoytman
    I have a php script that I have been developing which calls an external api within a loop. It is being tested on a VPS which is running LAMP on Debian. I noticed this morning that the api was not responding to my script. When I called the provider, they told me that my server had been calling the api 1000's of times per hour for the past 10 hours. I am assuming that a php script (which I have been working on the day before and testing on my VPS) entered into an infinite loop during one of the executions, and never came out (I have been testing it from the command prompt, and not over the web.) I have attempted to stop and start Apache, but the api support staff says that the calls are still coming in from my server address. How can I find and stop the process? Also, is there a possibility that the Apache stop/start solved the problem, but the api is still trying to sort through past calls? Please forgive me for not using my local test environment correctly. Edit: I do not know the process name, I need to discover the name (or pid) based on behavior.

    Read the article

  • Software disables itself when the PC is accessed via RDP

    - by blckgrffn
    We have a large, specialty printer that has vendor specific software that enables its use outside of it showing up simply as a printer in the Windows Control Panel. This software recognizes when we RDP into the machine and "disconnects" the PC from the printer within its proprietary control panel. All is well when an application like TeamViewer is used to access the machine. Ostensibly, the application is helping us be safe by "enforcing" that the machine used for the printer is a walk up workstation, or so the support folks informed me. If TeamViewer etc, fixes the issue, then what is the problem? We have many headless workstations in our warehouse attached to a variety of specialty machines, all used via RDP. We want/need to keep access to the machines the same for the sanity of our production staff. The meat of the question - how, specifically, might a machine know that it is being accessed via RDP (terminal services management???) and how might this be defeated without altering an application or driver. Of note, the system being used is a Windows 7 Pro machine hooked to the printer via USB. Thanks! Nat edit Is there any combination of /admin switches, etc. that will possibly fix this? Simply putting /admin did not.

    Read the article

  • What are the side effects of disabling an Exchange mailbox?

    - by Nic
    When working with Exchange Server 2007 or newer, disabling a mailbox is a fairly common operation. However, the Technet documentation has no details about the side effects of disabling a mailbox. This is all it says. "This task removes all the Exchange attributes from the user object in Active Directory. Based on the deleted items retention policy, the Exchange store will retain mailbox data for the user object." Source: http://technet.microsoft.com/en-us/library/bb123730(v=exchg.141).aspx But is that all? Exchange mailboxes in the real world tend to be highly interconnected. Perhaps the boss has delegated calendar control to a secretary. Maybe a team of staff members all share access to a public folder. Perhaps a power user has been granted the ability to receive email at several different addresses. Two clear questions come to mind. What happens to links between mailboxes after a mailbox is disconnected? Can the Disable-Mailbox operation be easily undone?

    Read the article

  • BYOD (accessing files) on a domain without joining?

    - by Philip White
    I run a Samba 4 instance at a small private school. This makes a regular Linux server appear as a directory controller. There are two relevant benefits to this: I have a Samba share for people's documents, and I use the Redirected Folders feature to allow any employee to sit down at any PC, log in with their domain credentials, and their My Documents points to network storage. Everyone has a mapped drive (using Group Policy Preferences) to a share specific to their account type. Students can access one share (one share for all students), teachers have another, and office staff have another. However, I would like to allow BYOD (Bring Your Own Device). Some employees are already asking for it with their personal laptops, and I know eventually most everyone will want to. Is there any way to replicate the two features above without having to join PCs to the domain? Joining personal PCs is impractical if only because only professional editions of Windows support this. Ideally, any operating system (including mobile) could access the relevant shares, but of course Windows is key. Offline caching is optional. (I could set up OpenVPN for teachers who want to access their files from home.) The problem with simply giving SSH access to the relevant shares is primarily that Samba 4 relies on ext4 ACLs and ext4 extended attributes to maintain NTFS permissions. Writing files directly to the Linux server would bypass this and would (probably) not be interoperable with Samba4. Right now I am completely flexible. I am even fine with scrapping the whole domain and using some other software for the two features above. How can I allow school employees and students freedom to securely share files without requiring everyone to have specific editions of Windows?

    Read the article

  • 8 Things You Can Do In Android’s Developer Options

    - by Chris Hoffman
    The Developer Options menu in Android is a hidden menu with a variety of advanced options. These options are intended for developers, but many of them will be interesting to geeks. You’ll have to perform a secret handshake to enable the Developer Options menu in the Settings screen, as it’s hidden from Android users by default. Follow the simple steps to quickly enable Developer Options. Enable USB Debugging “USB debugging” sounds like an option only an Android developer would need, but it’s probably the most widely used hidden option in Android. USB debugging allows applications on your computer to interface with your Android phone over the USB connection. This is required for a variety of advanced tricks, including rooting an Android phone, unlocking it, installing a custom ROM, or even using a desktop program that captures screenshots of your Android device’s screen. You can also use ADB commands to push and pull files between your device and your computer or create and restore complete local backups of your Android device without rooting. USB debugging can be a security concern, as it gives computers you plug your device into access to your phone. You could plug your device into a malicious USB charging port, which would try to compromise you. That’s why Android forces you to agree to a prompt every time you plug your device into a new computer with USB debugging enabled. Set a Desktop Backup Password If you use the above ADB trick to create local backups of your Android device over USB, you can protect them with a password with the Set a desktop backup password option here. This password encrypts your backups to secure them, so you won’t be able to access them if you forget the password. Disable or Speed Up Animations When you move between apps and screens in Android, you’re spending some of that time looking at animations and waiting for them to go away. You can disable these animations entirely by changing the Window animation scale, Transition animation scale, and Animator duration scale options here. If you like animations but just wish they were faster, you can speed them up. On a fast phone or tablet, this can make switching between apps nearly instant. If you thought your Android phone was speedy before, just try disabling animations and you’ll be surprised how much faster it can seem. Force-Enable FXAA For OpenGL Games If you have a high-end phone or tablet with great graphics performance and you play 3D games on it, there’s a way to make those games look even better. Just go to the Developer Options screen and enable the Force 4x MSAA option. This will force Android to use 4x multisample anti-aliasing in OpenGL ES 2.0 games and other apps. This requires more graphics power and will probably drain your battery a bit faster, but it will improve image quality in some games. This is a bit like force-enabling antialiasing using the NVIDIA Control Panel on a Windows gaming PC. See How Bad Task Killers Are We’ve written before about how task killers are worse than useless on Android. If you use a task killer, you’re just slowing down your system by throwing out cached data and forcing Android to load apps from system storage whenever you open them again. Don’t believe us? Enable the Don’t keep activities option on the Developer options screen and Android will force-close every app you use as soon as you exit it. Enable this app and use your phone normally for a few minutes — you’ll see just how harmful throwing out all that cached data is and how much it will slow down your phone. Don’t actually use this option unless you want to see how bad it is! It will make your phone perform much more slowly — there’s a reason Google has hidden these options away from average users who might accidentally change them. Fake Your GPS Location The Allow mock locations option allows you to set fake GPS locations, tricking Android into thinking you’re at a location where you actually aren’t. Use this option along with an app like Fake GPS location and you can trick your Android device and the apps running on it into thinking you’re at locations where you actually aren’t. How would this be useful? Well, you could fake a GPS check-in at a location without actually going there or confuse your friends in a location-tracking app by seemingly teleporting around the world. Stay Awake While Charging You can use Android’s Daydream Mode to display certain apps while charging your device. If you want to force Android to display a standard Android app that hasn’t been designed for Daydream Mode, you can enable the Stay awake option here. Android will keep your device’s screen on while charging and won’t turn it off. It’s like Daydream Mode, but can support any app and allows users to interact with them. Show Always-On-Top CPU Usage You can view CPU usage data by toggling the Show CPU usage option to On. This information will appear on top of whatever app you’re using. If you’re a Linux user, the three numbers on top probably look familiar — they represent the system load average. From left to right, the numbers represent your system load over the last one, five, and fifteen minutes. This isn’t the kind of thing you’d want enabled most of the time, but it can save you from having to install third-party floating CPU apps if you want to see CPU usage information for some reason. Most of the other options here will only be useful to developers debugging their Android apps. You shouldn’t start changing options you don’t understand. If you want to undo any of these changes, you can quickly erase all your custom options by sliding the switch at the top of the screen to Off.     

    Read the article

  • SQL – Quick Start with Explorer Sections of NuoDB – Query NuoDB Database

    - by Pinal Dave
    This is the third post in the series of the blog posts I am writing about NuoDB. NuoDB is very innovative and easy-to-use product. I can clearly see how one can scale-out NuoDB with so much ease and confidence. In my very first blog post we discussed how we can install NuoDB (link), and in my second post I discussed how we can manage the NuoDB database transaction engines and storage managers with a few clicks (link). Note: You can Download NuoDB from here. In this post, we will learn how we can use the Explorer feature of NuoDB to do various SQL operations. NuoDB has a browser-based Explorer, which is very powerful and has many of the features any IDE would normally have. Let us see how it works in the following step-by-step tutorial. Let us go to the NuoDBNuoDB Console by typing the following URL in your browser: http://localhost:8080/ It will bring you to the QuickStart screen. Make sure that you have created the sample database. If you have not created sample database, click on Create Database and create it successfully. Now go to the NuoDB Explorer by clicking on the main tab, and it will ask you for your domain username and password. Enter the username as a domain and password as a bird. Alternatively you can also enter username as a quickstart and password as a quickstart. Once you enter the password you will be able to see the databases. In our example we have installed the Sample Database hence you will see the Test database in our Database Hierarchy screen. When you click on database it will ask for the database login. Note that Database Login is different from Domain login and you will have to enter your database login over here. In our case the database username is dba and password is goalie. Once you enter a valid username and password it will display your database. Further expand your database and you will notice various objects in your database. Once you explore various objects, select any database and click on Open. When you click on execute, it will display the SQL script to select the data from the table. The autogenerated script displays entire result set from the database. The NuoDB Explorer is very powerful and makes the life of developers very easy. If you click on List SQL Statements it will list all the available SQL statements right away in Query Editor. You can see the popup window in following image. Here is the cool thing for geeks. You can even click on Query Plan and it will display the text based query plan as well. In case of a SELECT, the query plan will be much simpler, however, when we write complex queries it will be very interesting. We can use the query plan tab for performance tuning of the database. Here is another feature, when we click on List Tables in NuoDB Explorer.  It lists all the available tables in the query editor. This is very helpful when we are writing a long complex query. Here is a relatively complex example I have built using Inner Join syntax. Right below I have displayed the Query Plan. The query plan displays all the little details related to the query. Well, we just wrote multi-table query and executed it against the NuoDB database. You can use the NuoDB Admin section and do various analyses of the query and its performance. NuoDB is a distributed database built on a patented emergent architecture with full support for SQL and ACID guarantees.  It allows you to add Transaction Engine processes to a running system to improve the performance of your system.  You can also add a second Storage Engine to your running system for redundancy purposes.  Conversely, you can shut down processes when you don’t need the extra database resources. NuoDB also provides developers and administrators with a single intuitive interface for centrally monitoring deployments. If you have read my blog posts and have not tried out NuoDB, I strongly suggest that you download it today and catch up with the learnings with me. Trust me though the product is very powerful, it is extremely easy to learn and use. Reference: Pinal Dave (http://blog.sqlauthority.com)   Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

    Read the article

  • SQL Developer Data Modeler v3.3 Early Adopter: Collaborative Design via Excel?

    - by thatjeffsmith
    As you may have heard last week, we have a new version of Oracle SQL Developer Data Modeler now available as an Early Adopter release. Version 3.3 has quite a few new features and I’ll be previewing them here. Today’s topic is our new Excel integration. It builds off of last week’s lesson: Search, so you may want to go read that first. They say it takes a village to raise a child. I say it takes a team to build a data model. You have your techie folks, your business folks, your in-betweeners, and your database geeks. Who gets to define how customers are represented and stored in your database? That data lives forever, so you better get it right from the beginning, or you’ll be living in a hacker’s paradise for years to come. Lots of good rantings, ravings, and advice on this topic in general on Karen Lopez’s (@datachick) blog. But let’s say you are the primary modeler on a project. You dutifully interview the business folks for their requirements. You sit down and start to model and think you’re pretty close. Now you need someone to confirm your assumptions and provide some feedback. Do you send your model over? Take a screenshot and blow it up on a whiteboard? Export to HTML and let them take a magic marker to their monitors? Or maybe you bite the bullet and install your modeling software on their desktops and take the hours or days required to train them up on how to use the the tool. Wouldn’t it be nice if they could just mark up their corrections in Excel and let you suck the updates back in? This is what we have started to build in Oracle SQL Developer Data Modeler. Let’s say you have a new table called ‘UT_STARTUPS.’ It looks a little something like this: A table in Oracle SQL Developer Data Modeler What I would like to do is have my team or co-worker review how I have defined those columns. Perhaps TIMESTAMP is overkill or maybe the column names themselves aren’t up to snuff. What I am going to do is now search for all the columns in my table, then export that to Excel. So do a search for UT_STARTUPS. Search, filter, then Report With the filter set to ‘Columns,’ if I do a report I’ll be only getting the columns that are resolving to my search term. So as long as my table name is unique in the model, I should get what I’m looking for. Here’s what I see when I click on the Report button: XLS or XLSX, either format is just fine I want to decide how the Column data is exported to Excel though, so I’m going to create a report template that I can use going forward. So click the ‘Manage’ button and setup a new template. I’m going to call mine ‘CollaborativeDevelopment.’ The templates allow me to define what properties are included in the reports. Once this is set, I’ll have the XLS file generated, and get to work Now let the Excel junkies do their stuff Note that not ALL of the report properties are update-able (yes, I made up a new word there) via Excel. We’ll have the full list of properties documented going forward, but in my Excel sheet, note that I can’t change the table name or the data types for the columns. I’m going to update some column names and supply ‘nice’ comments so the database users know what’s what. Here’s my input for the designer/architect/database dude: Be kind, please rew…use comments. Save the file, email it back to your modeler. Update the model from Excel That’s right, it’s a right mouse click from your model in the tree If everything goes right, you’ll see a nice confirmation message: It’s alive! Another to-do item on tap – making this dialog more informative. We’ll be showing exactly what in your model was updated from Excel. Let’s take another look at the model now Voila! Why are we doing this again? The goal is to reduce the number of round-trips from the modeler and the business process owner. One is used to working with Excel – why not allow them to mark up their changes in the tool they already know? This is an early adopter release and I anticipate this feature getting a good bit of tuning up before we release. Why don’t you download 3.3, give it a whirl, and let us know what you think?

    Read the article

  • doubleTwist is an iTunes Alternative that Supports Several Devices

    - by Mysticgeek
    There are a lot of iTunes users out there, but unfortunately you can’t use it with all of your portable devices. Today we take a look at doubleTwist, which allows you to sync your media with a multitude of portable devices and easily share it as well. Note: You can run doubleTwist on Windows or Mac, and here we take a look at the Windows version. Install & Setup doubleTwist Download and install doubleTwist using the defaults in the wizard… Installation takes several moments and you’ll see the progress while it finishes up. After installation is complete, sign up for an account if you don’t already have one. If you do have an account you can login right away. Enter in your username, email address, and password then click Sign Up.   You’ll get an confirmation email and need to activate the account before you can sign in. Once you’re all signed up, launch doubleTwist and you’ll be ready to start using it. doubleTwist Music The default music store is Amazon MP3 store which might appeal to those of you who are tired of the iTunes music store. A lot of times the music is cheaper and available at higher bit rates. You can start searching for music in the Amazon Music Store and previewing songs. To purchase anything though you will need to sign into your Amazon account.   Under Playlists it allows you to import your playlists from iTunes and Windows Media Player, which is a handy feature if you don’t want to set them up again. Of course you can play your songs through the music player on your desktop. Devices One of the coolest things about doubleTwist is that it supports a lot of different portable media devices including iPod, BlackBerry, Windows Mobile, Android, PSP, Smartphones, and much more. Unfortunately for Zune users…there isn’t any support for the Zune of Zune HD yet. Here we have a Creative Zen attached and can sync songs, pictures, and podcasts. An HTC-S620 Smartphone running Windows Mobile… Even a simple USB drive will be recognized and you can transfer your media to it as well.   Podcasts Finding your favorite audio and video podcasts is easy with the search feature. You can easily manage and subscribe to podcasts in the subscriptions section.   You can watch the video podcasts directly in doubleTwist. Sharing Media Also you can share digital media with your friends or add it to Flickr and YouTube. You can send any pictures, videos, or music in your library to other people by dragging it over. You can email users individually… Or access contacts from your Gmail and Yahoo accounts. There is a limit to how much you can send of video podcasts… only the first 10 minutes. The person you send it to will get a link in their email that points to your My Feed page on the doubleTwist site.   There they can access the media you sent…in this example it’s a video podcast but you can share any media. Other Features Under My Profile you can change your avatar and personal information.   In Preferences you can choose where media is stored, its startup actions, podcast subscriptions, and manage device syncing. Conclusion It’s still in beta stage so expect some bugs, but overall doubleTwist is a solid media player that is easy to use with a clean interface. It’s simple and doesn’t try to do too much so is fairly easy on system resources. The main annoyance is it tries to catalog all of your media out of the box. Which may be alright for some users with smaller media collections, but very irritating to advanced users with large collections. Also there is currently no support for the Zune, but according to their forums, it’s on the way. At the time of this writing it’s in public beta and can be downloaded for XP, Vista, Windows 7 (32 & 64 bit), and Mac OSX. If you’re looking for an iTunes alternative that works with several different portable devices, you might want to give DoubleTwist a try. Download DoubleTwist Public Beta See If Your Media Device is Supported by doubleTwist Similar Articles Productive Geek Tips MusicBee is a Fast and Powerful Music ManagerAvoid the Apple QuickTime Bloat with QT LiteBeginner Geek: Set Default Programs in Windows 7 and VistaBeginner Geeks: OpenOffice is a Free Cross Platform Alternative to MS OfficeManage Devices the Easy Way with Device Stage in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more

    Read the article

  • Help Prevent Carpal Tunnel Problems with Workrave

    - by Matthew Guay
    Whether for work or leisure, many of us spend entirely too much time on the computer everyday.  This puts us at risk of having or aggravating Carpal Tunnel problems, but thanks to Workrave you can help to divert these problems. Workrave helps Carpal Tunnel problems by reminding you to get away from your computer periodically.  Breaking up your computer time with movement can help alleviate many computer and office related health problems.  Workrave helps by reminding you to take short pauses after several minutes of computer use, and longer breaks after continued use.  You can also use it to keep from using the computer for too much You time in a day.  Since you can change the settings to suit you, this can be a great way to make sure you’re getting the breaks you need. Install Workrave on Windows If you’re using Workrave on Windows, download (link below) and install it with the default settings. One installation setting you may wish to change is the startup.  By default Workrave will run automatically when you start your computer; if you don’t want this, you can simply uncheck the box and proceed with the installation. Once setup is finished, you can run Workrave directly from the installer. Or you can open it from your start menu by entering “workrave” in the search box. Install Workrave in Ubuntu If you wish to use it in Ubuntu, you can install it directly from the Ubuntu Software Center.  Click the Applications menu, and select Ubuntu Software Center. Enter “workrave” into the search box in the top right corner of the Software Center, and it will automatically find it.  Click the arrow to proceed to Workrave’s page. This will give you information about Workrave; simply click Install to install Workrave on your system. Enter your password when prompted. Workrave will automatically download and install.   When finished, you can find Workrave in your Applications menu under Universal Access. Using Workrave Workrave by default shows a small counter on your desktop, showing the length of time until your next Micro break (30 second break), Rest break (10 minute break), and max amount of computer usage for the day. When it’s time for a micro break, Workrave will popup a reminder on your desktop. If you continue working, it will disappear at the end of the timer.  If you stop, it will start a micro-break which will freeze most on-screen activities until the timer is over.  You can click Skip or Postpone if you do not want to take a break right then. After an hour of work, Workrave will give you a 10 minute rest break.  During this it will show you some exercises that can help eliminate eyestrain, muscle tension, and other problems from prolonged computer usage.  You can click through the exercises, or can skip or postpone the break if you wish.   Preferences You can change your Workrave preferences by right-clicking on its icon in your system tray and selecting Preferences. Here you can customize the time between your breaks, and the length of your breaks.  You can also change your daily computer usage limit, and can even turn off the postpone and skip buttons on notifications if you want to make sure you follow Workrave and take your rests! From the context menu, you can also choose Statistics.  This gives you an overview of how many breaks, prompts, and more were shown on a given day.  It also shows a total Overdue time, which is the total length of the breaks you skipped or postponed.  You can view your Workrave history as well by simply selecting a date on the calendar.   Additionally, the Activity tab in the Statics pane shows more info about your computer usage, including total mouse movement, mouse button clicks, and keystrokes. Conclusion Whether you’re suffering with Carpal Tunnel or trying to prevent it, Workrave is a great solution to help remind you to get away from your computer periodically and rest.  Of course, since you can simply postpone or skip the prompts, you’ve still got to make an effort to help your own health.  But it does give you a great way to remind yourself to get away from the computer, and especially for geeks, this may be something that we really need! Download Workrave Similar Articles Productive Geek Tips Switch to the Dvorak Keyboard Layout in XPAccess Your MySQL Server Remotely Over SSHHow to Secure Gaim Instant Messenger traffic at Work with SecureCRT and SSHConnect to VMware Server Console Over SSHDisclaimers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader

    Read the article

  • How to Answer a Stupid Interview Question the Right Way

    - by AjarnMark
    Have you ever been asked a stupid question during an interview; one that seemed to have no relation to the job responsibilities at all?  Tech people are often caught off-guard by these apparently irrelevant questions, but there is a way you can turn these to your favor.  Here is one idea. While chatting with a couple of folks between sessions at SQLSaturday 43 last weekend, one of them expressed frustration over a seemingly ridiculous and trivial question that she was asked during an interview, and she believes it cost her the job opportunity.  The question, as I remember it being described was, “What is the largest byte measurement?”.  The candidate made up a guess (“zetabyte”) during the interview, which is actually closer than she may have realized.  According to Wikipedia, there is a measurement known as zettabyte which is 10^21, and the largest one listed there is yottabyte at 10^24. My first reaction to this question was, “That’s just a hiring manager that doesn’t really know what they’re looking for in a candidate.  Furthermore, this tells me that this manager really does not understand how to build a team.”  In most companies, team interaction is more important than uber-knowledge.  I didn’t ask, but this could also be another geek on the team trying to establish their Alpha-Geek stature.  I suppose that there are a few, very few, companies that can build their businesses on hiring only the extreme alpha-geeks, but that certainly does not represent the majority of businesses in America. My friend who was there suggested that the appropriate response to this silly question would be, “And how does this apply to the work I will be doing?” Of course this is an understandable response when you’re frustrated because you know you can handle the technical aspects of the job, and it seems like the interviewer is just being silly.  But it is also a direct challenge, which may not be the best approach in interviewing.  I do have to admit, though, that there are those folks who just won’t respect you until you do challenge them, but again, I don’t think that is the majority. So after some thought, here is my suggestion: “Well, I know that there are petabytes and exabytes and things even larger than that, but I haven’t been keeping up on my list of Greek prefixes that have not yet been used, so I would have to look up the exact answer if you need it.  However, I have worked with databases as large as 30 Terabytes.  How big are the largest databases here at X Corporation?”  Perhaps with a follow-up of, “Typically, what I have seen in companies that have databases of your size, is that the three biggest challenges they face are: A, B, and C.  What would you say are the top 3 concerns that you would like the person you hire to be able to address?…Here is how I have dealt with those concerns in the past (or ‘Here is how I would tackle those issues for you…’).” Wait! What just happened?!  We took a seemingly irrelevant and frustrating question and turned it around into an opportunity to highlight our relevant skills and guide the conversation back in a direction more to our liking and benefit.  In more generic terms, here is what we did: Admit that you don’t know the specific answer off the top of your head, but can get it if it’s truly important to the company. Maybe for some reason it really is important to them. Mention something similar or related that you do know, reassuring them that you do have some knowledge in that subject area. Draw a parallel to your past work experience. Ask follow-up questions about the company’s specific needs and discuss how you can fulfill those. This type of thing requires practice and some forethought.  I didn’t come up with this answer until a day later, which is too late when you’re interviewing.  I still think it is silly for an interviewer to ask something like that, but at least this is one way to spin it to your advantage while you consider whether you really want to work for someone who would ask a thing like that.  Remember, interviewing is a two-way process.  You’re deciding whether you want to work there just as much as they are deciding whether they want you. There is always the possibility that this was a calculated maneuver on the part of the hiring manager just to see how quickly you think on your feet and how you handle stupid questions.  Maybe he knows something about the work environment and he’s trying to gauge whether you’ll actually fit in okay.  And if that’s the case, then the above response still works quite well.

    Read the article

  • Justifiable Perks.

    - by Phil Factor
        I was once the director of a start-up IT Company, and had the task of recruiting a proportion of the management team. As my background was in IT management, I was rather more familiar with recruiting Geeks for technology jobs, but here, one of my early tasks was interviewing a Marketing Director.  The small group of financiers had suggested a rather strange Irishman called  Halleran.  From my background in City of London dealing-rooms, I was slightly unprepared for the experience of interviewing anyone wearing a pink suit. Many of my older City colleagues would have required resuscitation after seeing his white leather shoes. However, nobody will accuse me of prejudging an interviewee. After all, many Linux experts who I’ve come to rely on have appeared for interview dressed as hobbits. In fact, the interview went well, and we had even settled his salary.  I was somewhat unprepared for the coda.    ‘And I will need to be provided with a Ferrari  by the company.’    ‘Hmm. That seems reasonable.’    Initially, he looked startled, and then a slow smile of victory spread across his face.    ‘What colour would you like?’ I asked genially.    ‘It has to be red.’ He looked very earnest on this point.    ‘Fine. I have to go past Hamleys on the way home this evening, so I’ll pick one up then for you.’    ‘Er.. Hamley’s is a toyshop, not a Ferrari Dealership.’    I stared at him in bafflement for a few seconds. ‘You’re not seriously asking for a real Ferrari are you?’     ‘Well, yes. Not for my own sake, you understand. I’d much prefer a simple run-about, but my position demands it. How could I maintain the necessary status in the office without one? How could I do my job in marketing when my grey Datsun was all too visible in the car Park? It is a tool of the job.’    ‘Excuse me a moment, but I must confer with the MD’    I popped out to see Chris, the MD. ‘Chris, I’m interviewing a lunatic in a pink suit who is trying to demand that a Ferrari is a precondition of his employment. I tried the ‘misunderstanding trick’ but it didn’t faze him.’     ‘Sorry, Phil, but we’ve got to hire him. The VCs insist on it. You’ve got to think of something that doesn’t involve committing to the purchase of a Ferrari. Current funding barely covers the rent for the building.’    ‘OK boss. Leave it to me.’    On return, I slapped O’Halleran’s file on the table with a genial, paternalistic smile. ‘Of course you should have a Ferrari. The only trouble is that it will require a justification document that can be presented to the board. I’m sure you’ll have no problem in preparing this document in the required format.’ The initial look of despair was quickly followed by a bland look of acquiescence. He had, earlier in the interview, argued with great eloquence his skill in preparing the tiresome documents that underpin the essential corporate and government deals that were vital to the success of this new enterprise. The justification of a Ferrari should be a doddle.     After the interview, Chris nervously asked how I’d fared.     ‘I think it is all solved.’    ‘… without promising a Ferrari, I hope.’    ‘Well, I did actually; on condition he justified it in writing.’    Chris issued a stream of invective. The strain of juggling the resources in an underfunded startup was beginning to show.    ‘Don’t worry. In the unlikely event of him coming back with the required document, I’ll give him mine.’    ‘Yours?’ He strode over to the window to stare down at the car park.    He needn’t have worried: I knew that his breed of marketing man could more easily lay an ostrich egg than to prepare a decent justification document. My Ferrari is still there at the back of my garage. Few know of the Ferrari cultivator, a simple inexpensive motorized device designed for the subsistence farmers of southern Italy. It is the very devil to start, but it creates a perfect tilth for the seedbed.

    Read the article

  • C# async and actors

    - by Alex.Davies
    If you read my last post about async, you might be wondering what drove me to write such odd code in the first place. The short answer is that .NET Demon is written using NAct Actors. Actors are an old idea, which I believe deserve a renaissance under C# 5. The idea is to isolate each stateful object so that only one thread has access to its state at any point in time. That much should be familiar, it's equivalent to traditional lock-based synchronization. The different part is that actors pass "messages" to each other rather than calling a method and waiting for it to return. By doing that, each thread can only ever be holding one lock. This completely eliminates deadlocks, my least favourite concurrency problem. Most people who use actors take this quite literally, and there are plenty of frameworks which help you to create message classes and loops which can receive the messages, inspect what type of message they are, and process them accordingly. But I write C# for a reason. Do I really have to choose between using actors and everything I love about object orientation in C#? Type safety Interfaces Inheritance Generics As it turns out, no. You don't need to choose between messages and method calls. A method call makes a perfectly good message, as long as you don't wait for it to return. This is where asynchonous methods come in. I have used NAct for a while to wrap my objects in a proxy layer. As long as I followed the rule that methods must always return void, NAct queued up the call for later, and immediately released my thread. When I needed to get information out of other actors, I could use EventHandlers and callbacks (continuation passing style, for any CS geeks reading), and NAct would call me back in my isolated thread without blocking the actor that raised the event. Using callbacks looks horrible though. To remind you: m_BuildControl.FilterEnabledForBuilding(    projects,    enabledProjects = m_OutOfDateProjectFinder.FilterNeedsBuilding(        enabledProjects,             newDirtyProjects =             {                 ....... Which is why I'm really happy that NAct now supports async methods. Now, methods are allowed to return Task rather than just void. I can await those methods, and C# 5 will turn the rest of my method into a continuation for me. NAct will run the other method in the other actor's context, but will make sure that when my method resumes, we're back in my context. Neither actor was ever blocked waiting for the other one. Apart from when they were actually busy doing something, they were responsive to concurrent messages from other sources. To be fair, you could use async methods with lock statements to achieve exactly the same thing, but it's ugly. Here's a realistic example of an object that has a queue of data that gets passed to another object to be processed: class QueueProcessor {    private readonly ItemProcessor m_ItemProcessor = ...     private readonly object m_Sync = new object();    private Queue<object> m_DataQueue = ...    private List<object> m_Results = ...     public async Task ProcessOne() {         object data = null;         lock (m_Sync)         {             data = m_DataQueue.Dequeue();         }         var processedData = await m_ItemProcessor.ProcessData(data); lock (m_Sync)         {             m_Results.Add(processedData);         }     } } We needed to write two lock blocks, one to get the data to process, one to store the result. The worrying part is how easily we could have forgotten one of the locks. Compare that to the version using NAct: class QueueProcessorActor : IActor { private readonly ItemProcessor m_ItemProcessor = ... private Queue<object> m_DataQueue = ... private List<object> m_Results = ... public async Task ProcessOne()     {         // We are an actor, it's always thread-safe to access our private fields         var data = m_DataQueue.Dequeue();         var processedData = await m_ItemProcessor.ProcessData(data);         m_Results.Add(processedData);     } } You don't have to explicitly lock anywhere, NAct ensures that your code will only ever run on one thread, because it's an actor. Either way, async is definitely better than traditional synchronous code. Here's a diagram of what a typical synchronous implementation might do: The left side shows what is running on the thread that has the lock required to access the QueueProcessor's data. The red section is where that lock is held, but doesn't need to be. Contrast that with the async version we wrote above: Here, the lock is released in the middle. The QueueProcessor is free to do something else. Most importantly, even if the ItemProcessor sometimes calls the QueueProcessor, they can never deadlock waiting for each other. So I thoroughly recommend you use async for all code that has to wait a while for things. And if you find yourself writing lots of lock statements, think about using actors as well. Using actors and async together really takes the misery out of concurrent programming.

    Read the article

  • Configure IPv6 on your Linux system (Ubuntu)

    After the presentation on IPv6 at the first event of the Emtel Knowledge Series and some recent discussion on social media networks with other geeks and Linux interested IT people here in Mauritius, I thought that I should give it a try (finally) and tweak my local network infrastructure. Honestly, I have been to busy with contractual project work and it never really occurred to me to set up IPv6 in my LAN. Well, the following paragraphs are going to shed some light on those aspects of modern computer and network technology. This is the first article in a series on IPv6 configuration: Configure IPv6 on your Linux system DHCPv6: Provide IPv6 information in your local network Enabling DNS for IPv6 infrastructure Accessing your web server via IPv6 Piece of advice: This is based on my findings on the internet while reading other people's helpful articles and going through a couple of man-pages on my local system. Let's embrace IPv6 The basic configuration on Linux is actually very simple as the kernel, operating system, and user-space programs support that protocol natively. If your system is ready to go for IP (aka: IPv4), then you are good to go for anything else. At least, I didn't have to install any additional packages on my system(s). We are going to assign a static IPv6 address to the system. Hence, we have to modify the definition of interfaces and check whether we have an inet6 entry specified. Open your favourite text editor and check the following entries (it should be at least similar to this): $ sudo nano /etc/network/interfaces auto eth0# IPv4 configurationiface eth0 inet static  address 192.168.1.2  network 192.168.1.0  netmask 255.255.255.0  broadcast 192.168.1.255# IPv6 configurationiface eth0 inet6 static  pre-up modprobe ipv6  address 2001:db8:bad:a55::2  netmask 64 Of course, you might have to adjust your interface device (eth0) or you might be interested to have multiple directives for additional devices (eth1, eth2, etc.). The auto instruction takes care that your device is enabled and configured during the booting phase. The use of the pre-up directive depends on your kernel configuration but in most scenarios this might be an optional line. Anyways, it doesn't hurt to have it enabled after all - just to be on the safe side. Next, either restart your network subsystem like so: $ sudo service networking restart Or you might prefer to do it manually with identical parameters, like so: $ sudo ifconfig eth0 inet6 add 2001:db8:bad:a55::2/64 In case that you're logged in remotely into your PC (ie. via ssh), it is highly advised to opt for the second choice and add the device manually. You can check your configuration afterwards with one of the following commands (depends on whether it is installed): $ sudo ifconfig eth0eth0      Link encap:Ethernet  HWaddr 00:21:5a:50:d7:94            inet addr:192.168.160.2  Bcast:192.168.160.255  Mask:255.255.255.0          inet6 addr: fe80::221:5aff:fe50:d794/64 Scope:Link          inet6 addr: 2001:db8:bad:a55::2/64 Scope:Global          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1 $ sudo ip -6 address show eth03: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000    inet6 2001:db8:bad:a55::2/64 scope global        valid_lft forever preferred_lft forever    inet6 fe80::221:5aff:fe50:d794/64 scope link        valid_lft forever preferred_lft forever In both cases, it confirms that our network device has been assigned a valid IPv6 address. That's it in general for your setup on one system. But of course, you might be interested to enable more services for IPv6, especially if you're already running a couple of them in your IP network. More details are available on the official Ubuntu Wiki. Continue to configure your network to provide IPv6 address information automatically in your local infrastructure.

    Read the article

  • Must-see sessions at TCUK11

    - by Roger Hart
    Technical Communication UK is probably the best professional conference I've been to. Last year, I spoke there on content strategy, and this year I'll be co-hosting a workshop on embedded user assistance. Obviously, I'd love people to come along to that; but there are some other sessions I'd like to flag up for anybody thinking of attending. Tuesday 20th Sept - workshops This will be my first year at the pre-conference workshop day, and I'm massively glad that our workshop hasn't been scheduled along-side the one I'm really interested in. My picks: It looks like you're embedding user assistance. Would you like help? My colleague Dom and I are presenting this one. It's our paen to Clippy, to the brilliant idea he represented, and the crashing failure he was. Less precociously, we'll be teaching embedded user assistance, Red Gate style. Statistics without maths: acquiring, visualising and interpreting your data This doesn't need to do anything apart from what it says on the tin in order to be gold dust. But given the speakers, I suspect it will. A data-informed approach is a great asset to technical communications, so I'd recommend this session to anybody event faintly interested. The speakers here have a great track record of giving practical, accessible introductions to big topics. Go along. Wednesday 21st Sept - day one There's no real need to recommend the keynote for a conference, but I will just point out that this year it's Google's Patrick Hofmann. That's cool. You know what else is cool: Focus on the user, the rest follows An intro to modelling customer experience. This is a really exciting area for tech comms, and potentially touches on one of my personal hobby-horses: the convergence of technical communication and marketing. It's all part of delivering customer experience, and knowing what your users need lets you help them, sell to them, and delight them. Content strategy year 1: a tale from the trenches It's often been observed that content strategy is great at banging its own drum, but not so hot on compelling case studies. Here you go, folks. This is the presentation I'm most excited about so far. On a mission to communicate! Skype help their users communicate, but how do they communicate with them? I guess we'll find out. Then there's the stuff that I'm not too excited by, but you might just be. The standards geeks and agile freaks can get together in a presentation on the forthcoming ISO standards for agile authoring. Plus, there's a session on VBA for tech comms. I do have one gripe about day 1. The other big UK tech comms conference, UA Europe, have - I think - netted the more interesting presentation from Ellis Pratt. While I have no doubt that his TCUK case study on producing risk assessments will be useful, I'd far rather go to his talk on game theory for tech comms. Hopefully UA Europe will record it. Thursday 22nd Sept - day two Day two has a couple of slots yet to be confirmed. The rumour is that one of them will be the brilliant "Questions and rants" session from last year. I hope so. It's not ranting, but I'll be going to: RTFMobile: beyond stating the obvious Ultan O'Broin is an engaging speaker with a lot to say, and mobile is one of the most interesting and challenging new areas for tech comms. Even if this weren't a research-based presentation from a company with buckets of technology experience, I'd be going. It is, and you should too. Pattern recognition for technical communicators One of the best things about TCUK is the tendency to include sessions that tackle the theoretical and bring them towards the practical. Kai and Chris delivered cracking and well-received talks last year, and I'm looking forward to seeing what they've got for us on some of the conceptual underpinning of technical communication. Developing an interactive non-text learning programme Annoyingly, this clashes with Pattern Recognition, so I hope at least one of the streams is recorded again this year. The idea of communicating complex information without words us fascinating and this sounds like a great example of this year's third stream: "anything but text". For the localization and DITA crowds, there's rich pickings on day two, though I'm not sure how many of those sessions I'm interested in. In the 13:00 - 13:40 slot, there's an interesting clash between Linda Urban on re-use and training content, and a piece on minimalism I'm sorely tempted by. That's my pick of #TCUK11. I'll be doing a round-up blog after the event, and probably talking a bit more about it beforehand. I'm also reliably assured that there are still plenty of tickets.

    Read the article

  • Discover What Powers Your Favorite Websites

    - by Matthew Guay
    Have you ever wondered if the site you’re visiting is powered by WordPress or if the webapp you’re using is powered by Ruby on Rails?  With these extensions for Google Chrome, you’ll never have to wonder again. Geeks love digging under the hood to see what makes their favorite apps and sites tick.  But opening the “View Source” window today doesn’t tell you everything there is to know about a website.  Plus, even if you can tell what CMS is powering a website from its source, it can be tedious to dig through lines of code to find what you’re looking for.  Also, the HTML code never tells you what web server a site is running on or what version of PHP it’s using.  With three extensions for Google Chrome you’ll never have to wonder again.  Note that some sites may not give as much information, but still, you’ll find enough data from most sites to be interesting. Discover Web Frameworks and Javascript Libraries with Chrome Sniffer If you want to know what CMS is powering a site or if it’s using Google Analytics or Quantcast, this is the extension for you.  Chrome Sniffer (link below) identifies over 40 different frameworks, and is constantly adding more.  It shows the logo of the main framework on the site on the left of your address bar.  Here wee see Chrome Sniffer noticed that How-To Geek is powered by WordPress.   Click the logo to see other frameworks on the site.  We can see that the site also has Google Analytics and Quantcast.  If you want more information about the framework, click on its logo and the framework’s homepage will open in a new tab. As another example, we can see that the Tumblr Staff blog is powered by Tumblr (of course), the Discus comment system, Quantcast, and the Prototype JavaScript framework. Or here’s a site that’s powered by Drupal, Google Analytics, Mollom spam protection, and jQuery.  Chrome Sniffer definitely uncovers a lot of neat stuff, so if you’re into web frameworks you’re sure to enjoy this extension. Find Out What Web Server The Site is Running On Want to know whether the site you’re looking at is running on IIS or Appache?  The Web Server Notifier extension for Chrome (link below) lets you easily recognize the web server a site is running on by its favicon on the right of the address bar.  Click the icon to see more information. Some web servers will show you a lot of information about their server, including version, operating system, PHP version, OpenSSL version, and more. Others will simply tell you their name. If the site is powered by IIS, you can usually tell the version of Windows Server its running on since the IIS versions are specific to a version of Windows.  Here we see that Microsoft.com is running on the latest and greatest – Windows Server 2008 R2 with IIS 7.5. Discover Web Technologies Powering Sites Wondering if a webapp is powered by Ruby on Rails or ASP.NET?  The Web Technology Notifier extension for Chrome (link below), from the same developer as the Web Server Notifier, will let you easily discover the backend of a site.  You’ll see the technology’s favicon on the right of your address bar, and, as with the other extension, can get more information by clicking the icon. Here we can see that Backpack from 37signals is powered by the Phusion Passenger module to run Ruby on Rails.   Microsoft’s new Docs.com Office Online apps is powered by ASP.NET…   And How-To Geek has PHP running to power WordPress. Conclusion With all these tools at hand, you can find out a lot about your favorite sites.  For example, with all three extensions we can see that How-To Geek runs on WordPress with PHP, uses Google Analytics and Quantcast, and is served by the LightSpeed web server.  Fun info, huh?   Links Download the Chrome Sniffer extension Download the Web Server Notifier extension Download the Web Technology Notifier extension Similar Articles Productive Geek Tips Enjoy a Clean Start Page with New Tab PageEnjoy Image Zooming on Your Favorite Photo Websites in ChromeAdd Your Own Folders to Favorites in Windows 7Find User Scripts for Your Favorite Websites the Easy WayAdd Social Elements to Your Gmail Contacts with Rapportive TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 tinysong gives a shortened URL for you to post on Twitter (or anywhere) 10 Superb Firefox Wallpapers OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes

    Read the article

  • Reflections from the Young Prisms

    - by Oracle OpenWorld Blog Team
     By Karen Shamban The Young Prisms began their musical journey in San Francisco, and it's here they return to bring their unique sound to the Oracle OpenWorld Music Festival.  We asked them to tell us their thoughts on music, performing, and what they like in an audience.  Here's what they had to say: Q. What do you like best about performing in front of a live audience?A. There are a lot of things to love about playing in front of people. The best part is definitely the nights when the energy the audience brings shows through. Although it always differs from city to city and person to person, when you play to a full house and people are really getting into it, it's like no other feeling.Q. How do you use technology in creating and delivering your music?A. Well, we actually use a lot more electronic components than people realize. Pretty much every string instrument played either live or on recording has been filtered through numerous electronic effects. Matt uses somewhere around 12 or 14 every time we play live. Giovanni has six. Most of our writing and demoing is done with drum sequencers and samplers too, so it's safe to say we use technology to our advantage in the writing process. Live is a bit different, since we keep it to the basics with guitars and acoustic drums. We also tend to use projections when we play live, so technology helps us do that fairly easily as well.Q. Do you prefer smaller, intimate venues or larger, louder ones?  Why?A. Couldn’t say we have a real preference in venue size. I mean, its always great to get to play through a massive killer sound system, but small venues when packed full are equally as special if not more so, because of the intimacy of it. Some of my favorite shows I've seen as an audience member/ fan have been at the smaller venues in San Francisco.Q. What about your fans surprises you?A. Sometimes the older guys are a surprise. We've played shows where there are more older guys in their 40s and 50s, who come and stare and take notes at our effects pedals. Then there are kids our age or in their 20s. Sometimes it's surprising to think that the older guys relate to what we're doing more than our peers and friends in our age group.Q. What about your live act surprises your fans?A. I think people are often surprised by how shy we can be. It feels like people expect us to be really rowdy and throw things and make really loud noises and get really aggressive on stage because some of the sounds we use can have an abrasive element to them. People expect Matt to have some kind of Kurt Cobain attitude, which he doesn’t at all. So it seems it surprises people to see musicians playing loud and noisy songs in their early and mid 20s being fairly tame and calm on stage.Q. There are going to be a lot of technical people (you could call them geeks) in the Oracle crowd -- what are they going to love about your performance?A. Hopefully most of them are pedal nerds like we are and like the previously mentioned “older dude crowd.” Besides that I hope they’d be into the projections and group of songs we're going to play for them.Q. What's new and different in the music you're making today, versus a year or two ago?A. I'd say there is more focus on the songwriting now and less of the noise today than last year. I think it's pretty evident on the new record compared to the last two. On the first two records we made as YP, we had another guitar player and songwriter who no longer plays with us. So the process in which we develop songs is different as well.Q. Have you been on tour recently? If so, what do you like about touring, and what do you dislike?A. Touring is amazing. Some people might tell you different if they've been doing it for what they'd call too long, but for us it's really a great chance to play for people who care about the music we're making and also to see and explore the world. Getting to visit so many different cities and explore so many different cultures is amazing. Of course we love getting into cultural foods too. Stefanie is a fashion geek so getting to go to New York as often as we do as well as getting to play in London and Paris is always especially fun for her.Q. Ever think about playing another kind of music? If so, what, and why?A. Never really thought about wanting to do anything drastically different. I think the style of music we play has a lot to do with the stuff we have been listening to both growing up and now. It wasn’t really a conscious decision to make sure it was a certain sound, so I'm not sure we've ever thought about doing a way different genre or whatever like electronic music or country. Although there have been times we've had conversations where we discuss possibly doing quiet sets or using the string synth sounds.Q. What are the top three things people should know about your music?A1. We like noise.A2. We use ambience and atmosphere as much as as we can.A3. Yes, the vocals are supposed to be mixed in with the guitars. Get more info: Oracle OpenWorld Music Festival Young Prisms

    Read the article

  • Do you feel underappreciated or resent the geek/nerd stigma?

    - by dotnetdev
    At work we have a piece of A4 paper with the number of everyone in the office. The structure of this document is laid out in rectangles, by department. I work for the department that does all the technical stuff. That includes support—bear in mind that the support staff isn't educated in IT but just has experience in PC maintenance and providing support to a system we resell but don't have source code access to, project manager, team leader, a network administrator, a product manager, and me, a programmer. Anyway, on this paper, we are labelled as nerds and geeks. I did take a little offence to this, as much as it is light hearted (but annoying and old) humour. I have a vivid image that a geek is someone who doesn't go out but codes all day. I code all day at home and at work (when I have something to code...), but I keep balance by going out. I don't know why it is only people who work with computers that get such a stigma. No other profession really gets the same stigma—skilled, technical, or whatever. An account manager (and this is hardly a skilled job) says, "Perhaps [MY NAME HERE] could write some geeky code tomorrow to add this functionality to the website." It is funny how I get such an unfair stigma but I am so pivotal. In fact, if it wasn't for me, the company would have nothing to sell so the account managers would be redundant! I make systems, they get sold, and this is what pays the wages. It's funny how the account managers get a commission for how many systems they sell, or manage to make clients resubscribe to. Yet I built the thing in the first place! On top of that, my brother says all I do is type stuff on a keyboard all day. Surely if I did, I'd be typing at my normal typing speed of 100wpm+ as if I am writing a blog entry. Instead, I plan as I code along on the fly if commercial pressures and time prohibit proper planning. I never type as if I'm writing normal English. There is more to our jobs than just typing code. And my brother is a pipe fitter with no formal qualifications in his name. I could easily, and perhaps more justifiably, say he just manipulates a spanner or something. Does you feel underappreciated or that a geek/nerd stigma is undeserved or unfair?

    Read the article

< Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >