Search Results

Search found 6510 results on 261 pages for 'umesha ms'.

Page 222/261 | < Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >

  • Test your internet connection - Emtel Fixed Broadband

    Already at the begin of April, I had a phone conversation with my representative at Emtel Ltd. about some upcoming issues due to the ongoing construction work in my neighbourhood. Unfortunately, they finally raised the house two levels above ours, and of course this has to have a negative impact on the visibility between the WiMAX outdoor unit on the roof and the aimed access point at Medine. So, today I had a technical team here to do a site survey and to come up with potential solutions. Short version: It doesn't look good after all. The site survey Well, the two technicians did their work properly, even re-arranged the antenna to check the connection with another end point down at La Preneuse. But no improvements. Looks like we are out of luck since the construction next door hasn't finished yet and at the moment, it even looks like they are planning to put at least one more level on top. I really wonder about the sanity of the responsible bodies at the local district council. But that's another story. Anyway, the outdoor unit was once again pointed towards Medine and properly fixed with new cable guides (air from the sea and rust...). Both of them did a good job and fine-tuned the reception signal to a mere 3 over 9; compared to the original 7 over 9 I had before the daily terror started. The site survey has been done, and now it's up to Emtel to come up with (better) solutions. Well, I wouldn't mind to have an unlimited, symmetric 3G/UMTS or even LTE connection. Let's see what they can do... Testing the connection There are several online sites available which offer you to check certain aspects of your internet connection. Personally, I'm used to speedtest.net and it works very well. I think it is good and necessary to check your connection from time to time, and only a couple of days ago, I posted the following on Emtel's wall at Facebook (21.05.2013 - 14:06 hrs): Dear Emtel, could you eventually provide an answer on the miserable results of SpeedTest? I chose Rose Hill (Hosted by Emtel Ltd.) as testing endpoint... Sadly, no response to this. Seems that the marketing department is not willing to deal with customers on Facebook. Okay, over at speedtest.net you can use their Flash-based test suite to check your connection to quite a number of servers of different providers world-wide. It's actually very interesting to see the results for different end points and to compare them to each other. The results Following are the results of Rose Hill (hosted by Emtel) and respectively Frankfurt, Germany (hosted by Vodafone DE): Speedtest.net result of 30.05.2013 between Flic en Flac and Rose Hill, Mauritius (Emtel - Fixed Broadband) Speedtest.net result of 30.05.2013 between Flic en Flac and Frankfurt, Germany (Emtel - Fixed Broadband) Luckily, the results are quite similar in terms of connection speed; which is good. I'm currently on a WiMAX tariff called 'Classic Browsing 2', or Fixed Broadband as they call it now, which provides a symmetric line of 768 Kbps (or roughly 0.75 Mbps). In terms of downloads or uploads this means that I would be able to transfer files in either direction with approximately 96 KB/s. Frankly speaking, thanks to compression, my choice of browser and operating system I usually exceed this value and I have download rates up to 120 KB/s - not too bad after all. Only the ping times are a little bit of concern. Due to the difference in distance, or better said based on the number of hubs between the endpoints, they indicate the amount of time that it takes to send a package from your machine to the remote server and get a response back. A lower value is better, and usually the ping is less than 300 ms between Mauritius and Europe. The alternatives in Mauritius Not sure whether I should note this done because for my requirements there are no alternatives to Emtel WiMAX at the moment. It would be great to have your opinion on the situation of internet connectivity in Mauritius. Are there really alternatives? And if so, what are the conditions?

    Read the article

  • Perspective Is Everything

    - by juanlarios
    Sitting on a window seat on my way back from Seattle I looked out the window and saw the large body of water. I was reminded of childhood memories of running as hard as I could through burning hot sand with the anticipation of the splash of the ocean. Looking out the window the water appeared like a sheet draped over land. I couldn’t help but ponder how perspective changes everything.  Over the last several days I had a chance to attend the MVP Summit in Redmond. I had a great time with fellow MVP’s and the SharePoint Product Group. Although I can’t say much about what was discussed and what is coming in the future, I want to share some realizations I had while experiencing the MVP summit.  The SharePoint Product is ever-improving, full of innovation but also a reactionary embodiment of MVP, client and market feedback. There are several features that come to mind that clients complain about where I have felt helpless in informing them that the features are not as mature as they would like it. Together, we figure out a way to make it work and deal with the limitations. It became clear that there are features that have taken a different purpose in the market place from the original vision. The SP Product group is working hard to react to these changes in vision and make SharePoint better for real life implementations.  It is easy to think that SharePoint should be all things to all people. In reality there are products that are very detailed in specific composites, they do this one thing well but severely lack in other areas.  Its easy sometimes to say, “What was Microsoft thinking with this feature?” the Product group is doing all they can to make the moving pieces better and dealing with challenges with having all of them work together.  Sometimes the features don’t fully embody the vision because of the many challenges, but trust me when I say the product group is really focused on delivery and innovation.  As I was speaking with a fellow MVP throughout the session, we spoke about the iPad 2(ironically announced this past week during the MVP summit) and Microsoft’s possible product answer; I realized the days of reactionary products from MS is over. There are many users that will remember Vista and the painful execution in that product, but there has been a lot of success in Windows 7. There was no rush for a reactionary answer to the Nintendo Wii, as a result a ground breaking and game changing product was brought to market, the XBOX –Kinect! I can’t say much here, but it’s safe to say, expect innovation, and execution of products and technology that will change the market instead of react to them!       There are many things I learned and I would love to share that have to do with perspective, technology, etc… but this is far as I can go in details. This might not be new to you or specifically the message that was shared during the summit. These are just my impressions of the event and the spirit of future vision. Great things ahead!

    Read the article

  • Drivers for Atheros AR928X?

    - by Pato7
    I am new in Ubuntu and I had a big trouble with wifi. My ubuntu 12.10 doesn't detect my wifi card and I can't toggle the "activate wireless" option on the tasks bar (it is grey). I searched for drivers to make it work, but nothing worked for me. Can anyone give me a hand? Many thanks in advanced! lspci output 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8057 PCI-E Gigabit Ethernet Controller (rev 10) 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) 0c:03.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 0c:03.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 0c:03.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) lshw -c network output *-network descripción: Ethernet interface producto: 88E8057 PCI-E Gigabit Ethernet Controller fabricante: Marvell Technology Group Ltd. id físico: 0 información del bus: pci@0000:02:00.0 nombre lógico: eth0 versión: 10 serie: 00:24:be:83:b2:4f tamaño: 100Mbit/s capacidad: 1Gbit/s anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuración: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full ip=192.168.1.123 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s recursos: irq:45 memoria:d3520000-d3523fff ioport:c000(size=256) memoria:d3500000-d351ffff *-network DESACTIVADO descripción: Interfaz inalámbrica producto: AR928X Wireless Network Adapter (PCI-Express) fabricante: Atheros Communications Inc. id físico: 0 información del bus: pci@0000:03:00.0 nombre lógico: wlan0 versión: 01 serie: 2c:81:58:e6:b6:03 anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuración: broadcast=yes driver=ath9k driverversion=3.5.0-18-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn recursos: irq:17 memoria:d2100000-d210ffff rfkill list all output 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes 1: sony-wifi: Wireless LAN Soft blocked: yes Hard blocked: no

    Read the article

  • Why I switch from Asana.com

    - by Anirudha
    Originally posted on: http://geekswithblogs.net/anirugu/archive/2013/10/24/why-i-switch-from-asana.com.aspxI used Asana.com from 1-2 years. have nice experience to use it. it’s not so easy. When I started using it it’s make many confusion. Now I switch from it.   When I first time see I really didn’t understand how to make a private list. There is a icon on top click on it and make it private. After doing that I still not sure if this is working. There is a lot of confusion made that time. I discuss too much to figure out small small things. The UI is interesting but so hard to understand.  What I am looking for is just a list that I can hold private. I would like to share it only if I put them shared and put email address of person to hold them same list. Few days ago I see that My Win8 phone have a app that call Microsoft OneNote. The good thing of this MS app is that I can record my voice in the app. If someone want to make a list for future then he just need to say and this can be recorded.  This is awesome when you feel that Mobile keypad is just not so fast as a normal regular keyboard.   Google docs are another good option to handle this thing. Just make a word file and use it. share it with friend with many option. One best thing is this app have very simply UI then any other apps.   One more alternative is https://trello.com which you hear from joel on their blog http://www.joelonsoftware.com/items/2011/09/13.html There are many html5 and browser based, mobile based app. Many of them support multi platform feature. this means you can have them from PC to your Pocket. One good thing we all wanted is offline. if you are not online thing will be saved and push back to server when you will be online.   The biggest problem with some apps are they are attractive easy but hard to learn. Their one feature are not clearly defined what he does. This make frustration and confusion to user. When app are not simple to use people start stop trying to learn it. That’s all the problem I have with asana.com If you don’t want to try anything then what about Sticky Notes that is part of Windows 7. This app are still usable since you can store the text on it. If you know any good app to make a task list that provide access from tablet/mobile then put comment here. In the whole world of app there is a lot of app for doing this same thing differently. I mention few of them here. I hope this is nice to describe it.   Thanks for read my post.

    Read the article

  • Video works with 'Try me' but not after install. What is the difference? U12.04LTS,

    - by HarveyP
    My hard drive got corrupted so I did a reinstall. Tested Youtube in FF during 'try me' and it worked - jerky, but it worked. Instal without all the updates (576 outstanding now) in order to get ff installed as per the demo - to no avail. In 'try me' mode ff NEVER crashed! After install ff crashed whilst I was typing in 'youtube' in the address field. When I finally got to youtube - no video. What is the difference between ff in try me and ff after install? Off to try some selected updates now to see if I can see it for myself. In previous installation I had several profiles and aliased ff with -safe-mode switch to simplify startup of most stable ff. Also found that ff startup in graphic mode worked better (but still without video) with all of the extensions disabled and all of the plugins set to "ask" and always denied ... I have SiS graphic card in SiS Motherboard for XP and ancient Hyundai ImageQuest QV770 monitor. I have Ubuntu 12.04.01 LTS 1 day after install with only the immediate upgrades requested to language pack (English UK). Using FR Alternative keyboard. Connected with domestic wifi network from Orange (FT) I really want to use Skype, but won't bother installing it (again) without video as I can do my sms on FB - whilst ff is not crashed ... Update ... Is something overflowing? I have just had to reboot in order to get ff to restart in any way shape or form - restart on crash form generates new crash form, etc. It was however a good half hour before it crashed so some improvement over conditions before disk corruption. I have now installed all of the critical updates (332 recommended updates still outstanding) which included some relating to ff. Still no video. Still crashing - especially when on Grepolis website. Since the re-install I have had a lovely 1024x768 screen, but after last ff crash and reboot I got a message about 'low graphics mode' and 'setting things myself'. I was not sufficiently tuned in at the time to take proper note - I have no doubt I shall see it again and shall report accordingly. I still have only laptop options for my screen and do not know how to rectify this. Spent a few days with ubuntu on a different, newer machine which has now suffered a graphics breakdown. Returned to this old one again, but with new flat screen Monitor. Found SIS drivers for my graphics BUT it is intended for Red Hat 7.2. I chose this over the version for 7.0 because I thought what the hell, I might not be able to do anything with either of them but this is the later one ... The file will not open with software manager - found a similar problem on Overclock but it has not helped me to install this driver. File name is sis_drv.o-410 and it is currently idling away in my Downloads folder ... I have tried the solution offered on another sis problem, but this shows that my xserver-xorg-video-sis driver is up to date. I am now at a loss as to how to proceed if I can't install the latest sis driver from sis ... Does nobody know how FF changes from "try-me" to "installed"? Any time I MUST have video I reboot from the disk again, but this is tedious! Also one of the things I mock most about MS is the constant rebooting ... UPDATE 10/6/2014 I have installed chromium-browser - worse, crashes even more often than ff.I have installed epiphany - better; Video works but not the associated soundtrack.FireFox is version 14.01 in 'try me' and version 29.0 from my install. Would it be useful to try to downgrade FireFox in order to get video?

    Read the article

  • Is Visual Source Safe (The latest Version) really that bad? Why? What's the Best Alternative? Why? [closed]

    - by hanzolo
    Over the years I've constantly heard horror stories, had people say "Real Programmers Dont Use VSS", and so on. BUT, then in the workplace I've worked at two companies, one, a very well known public facing high traffic website, and another high end Financial Services "Web-Based" hosted solution catering to some very large, very well known companies, which is where I currently Reside and everything's working just fine (KNOCK KNOCK!!). I'm constantly interfacing with EXTREMELY Old technology with some of these financial institutions.. OLD LIKE YOU WOULDN'T BELIEVE.. which leads me to the conclusion that if it works "LEAVE IT", and that maybe there's some value in old technology? at least enough value to overrule a rewrite!? right?? Is there something fundamentally flawed with the underlying technology that VSS uses? I have a feeling that if i said "someone said VSS Sucks" they would beg to differ, most likely give me this look like i dont know -ish, and I'd never gain back their respect and my credibility (well, that'll be hard to blow.. lol), BUT, give me an argument that I can take to someone whose been coding for 30 years, that builds Platforms that leverage current technology (.NET 3.5 / SQL 2008 R2 ), write's their own ORM with scaffolding and is able to provide a quality platform that supports thousands of concurrent users on a multi-tenant hosted solution, and does not agree with any benefits from having Source Control Integrated, and yet uses the Infamous Visual Source Safe. I have extensive experience with TFS up to 2010, and honestly I think it's great when a team (beyond developers) can embrace it. I've worked side by side with someone whose a die hard SVN'r and from a purist standpoint, I see the beauty in it (I need a bit more, out of my SS, but it surely suffices). So, why are such smarties not running away from Visual Source Safe? surely if it was so bad, it would've have been realized by now, and I would not be sitting here with this simple old, Check In, Check Out, Version Resistant, Label Intensive system. But here I am... I would love to drop an argument that would be the end all argument, but if it's a matter of opinion and personal experience, there seems to be too much leeway for keeping VSS. UPDATE: I guess the best case is to have the VSS supporters check other people's experiences and draw from that until we (please no) experience the breaking factor ourselves. Until then, i wont be engaging in a discussion to migrate off of VSS.. UPDATE 11-2012: So i was able to convince everyone at my work place that since MS is sun downing Visual Source Safe it might be time to migrate over to TFS. I was able to convince them and have recently upgraded our team to Visual Studio 2012 and TFS 2012. The migration was fairly painless, had to run analyze.exe which found a bunch of errors (not sure they'll ever affect the project) and then manually run the VSSConverter.exe. Again, painless, except it took 16 hours to migrate 5 years worth of everything.. and now we're on TFS.. much more integrated.. much more cooler.. so all in all, VSS served it's purpose for years without hick-up. There were no horror stories and Visual Source Save as source control worked just fine. so to all the nay sayers (me included). there's nothing wrong with using VSS. i wouldnt start a new project with it, and i would definitely consider migrating to TFS. (it's really not super difficult and a new "wizard" type converter is due out any day now so migrating should be painless). But from my experience, it worked just fine and got the job done.

    Read the article

  • Why is the framerate (fps) capped at 60?

    - by dennmat
    ISSUE I recently moved a project from my laptop to my desktop(machine info below). On my laptop the exact same code displays the fps(and ms/f) correctly. On my desktop it does not. What I mean by this is on the laptop it will display 300 fps(for example) where on my desktop it will show only up to 60. If I add 100 objects to the game on the laptop I'll see my frame rate drop accordingly; the same test on the desktop results in no change and the frames stay at 60. It takes a lot(~300) entities before I'll see a frame drop on the desktop, then it will descend. It seems as though its "theoretical" frames would be 400 or 500 but will never actually get to that and only do 60 until there's too much to handle at 60. This 60 frame cap is coming from no where. I'm not doing any frame limiting myself. It seems like something external is limiting my loop iterations on the desktop, but for the last couple days I've been scratching my head trying to figure out how to debug this. SETUPS Desktop: Visual Studio Express 2012 Windows 7 Ultimate 64-bit Laptop: Visual Studio Express 2010 Windows 7 Ultimate 64-bit The libraries(allegro, box2d) are the same versions on both setups. CODE Main Loop: while(!abort) { frameTime = al_get_time(); if (frameTime - lastTime >= 1.0) { lastFps = fps/(frameTime - lastTime); lastTime = frameTime; avgMspf = cumMspf/fps; cumMspf = 0.0; fps = 0; } /** DRAWING/UPDATE CODE **/ fps++; cumMspf += al_get_time() - frameTime; } Note: There is no blocking code in the loop at any point. Where I'm at My understanding of al_get_time() is that it can return different resolutions depending on the system. However the resolution is never worse than seconds, and the double is represented as [seconds].[finer-resolution] and seeing as I'm only checking for a whole second al_get_time() shouldn't be responsible. My project settings and compiler options are the same. And I promise its the same code on both machines. My googling really didn't help me much, and although technically it's not that big of a deal. I'd really like to figure this out or perhaps have it explained, whichever comes first. Even just an idea of how to go about figuring out possible causes, because I'm out of ideas. Any help at all is greatly appreciated. EDIT: Thanks All. For any others that find this to disable vSync(windows only) in opengl: First get "wglext.h". It's all over the web. Then you can use a tool like GLee or just write your own quick extensions manager like: bool WGLExtensionSupported(const char *extension_name) { PFNWGLGETEXTENSIONSSTRINGEXTPROC _wglGetExtensionsStringEXT = NULL; _wglGetExtensionsStringEXT = (PFNWGLGETEXTENSIONSSTRINGEXTPROC) wglGetProcAddress("wglGetExtensionsStringEXT"); if (strstr(_wglGetExtensionsStringEXT(), extension_name) == NULL) { return false; } return true; } and then create and setup your function pointers: PFNWGLSWAPINTERVALEXTPROC wglSwapIntervalEXT = NULL; PFNWGLGETSWAPINTERVALEXTPROC wglGetSwapIntervalEXT = NULL; if (WGLExtensionSupported("WGL_EXT_swap_control")) { // Extension is supported, init pointers. wglSwapIntervalEXT = (PFNWGLSWAPINTERVALEXTPROC) wglGetProcAddress("wglSwapIntervalEXT"); // this is another function from WGL_EXT_swap_control extension wglGetSwapIntervalEXT = (PFNWGLGETSWAPINTERVALEXTPROC) wglGetProcAddress("wglGetSwapIntervalEXT"); } Then just call wglSwapIntervalEXT(0) to disable vSync and 1 to enable vSync. I found the reason this is windows only is that openGl actually doesn't deal with anything other than rendering it leaves the rest up to the OS and Hardware. Thanks everyone saved me a lot of time!

    Read the article

  • 12.10 unable to install or even run from Live CD with nVidia GTX 580

    - by user99056
    I've used Ubuntu in the past (set up as web server, etc over in Iraq), so I'm not a 100% Linux Noob, however, I'm running into a brick wall here. I've got a machine I built when I got back to the US earlier this year, running Windows 7 Ultimate on it, and I've now got some free time and would like to transition over to Ubuntu full time. I've searched around in the forums, and there seems to be an issue with the nVidia graphics cards, so I've tried going to the EVGA site to see if I could find a new BIOS update for it and had no luck, so I'm back searching the forums here again and decided to just go ahead and post my question. My apologies if this is covered in another post and I was just unable to find it. I've found a few 'similar' posts, but nothing as bad as my issue. With the history aside, here is the actual detailed issue: I purchased a new SSD (Intel 520 SSD), arrived today, and I disconnect my old Windows 7 SSD. I had pre downloaded the ubuntu-12.10-desktop-amd64 earlier today and burned it to DVD. Upon inserting the Live CD into the computer and booting up, everything was fine up to the 'Run From Live CD' or 'Install Ubuntu Now' buttons. As I was sure I wanted to go ahead and make the switch, I selected the 'Install Now' from the right hand side. CD Spins up, black window pops up, and then the errors started: date/time GPU Lockup date/time Failed to idle channel 1 date/time PFIFO - playlist update failed date/time Failed to idle channel 2 date/time PFIFO - playlist update failed Thinking it might correct itself, I let it run and it would swap over to a GUI Screen that was locked up with major blurring/etc, then back to the command line with the errors. Eventually it said something along the lines of 'unknown status' and switched back to the GUI and froze. So, that's when I tried to see if I could find a BIOS upgrade for the nVidia GTX580 cards, and had no luck. So I thought, why not try to just run it from the Live CD and see if I can at least get a look at it, maybe if I could get it running try to do some sort of install from there and fix the driver issue. I rebooted, brought up the Live CD, and this time chose the left option / run from the CD. It brought me all the way in to the desktop, I saw my drives, the other icons, could move the mouse, etc for about 30 seconds and then it locked up completely. I've tried this a couple of times and get the same results every time. Hardware: Intel i7-3930K CPU @ 3.2GHz (12 CPUs) / MSI MS-7760 Motherboard / 32GB RAM / 2 x EVGA (nVidia) GeForce GTX 580 (4GB Ram each) So the question is: Is there any way to install 12.10 if you can't even get the Live CD to run (for more than 30 seconds)? My current hardware configuration is both of the GTX 580 cards have an SLI jumper on them, and I have 2 monitors on each card. (Ubuntu info obviously only shows on the main monitor from the failed installation and the attempt at running the Live CD). Perhaps opening the machine back up and removing the SLI Jumper and removing the other 3 monitors (so it only would have 1 video card with one monitor on it) would actually allow me to get 12.10 installed, then I could work on an nVidia Video Driver fix for the GTX 580, and then possibly hook up the other video card and monitors? Or is this something that they are currently aware of and may update with a future release in the next few days/weeks? Any thoughts or suggestions would be greatly appreciated, as I can't even try to fix the issue (assuming it is the nVidia drivers) if I can't even get it to install at all.

    Read the article

  • Oracle Enterprise Computing Summit??!??????/EM????????

    - by Oracle Japan Marketing
    .NewsType1107 img{border:none; vertical-align:bottom;} .NewsType1107 p{margin:0; padding:0;} .NewsType1107 td{color:#333333; line-height:1.5; font-family:"MS P????", Osaka, Hiragino Kaku Gothic Pro; font-size:12px;} .NewsType1107 table.t10 td, .small{font-size:10px;} .NewsType1107 a:link, a:visited{color:#ff0000;} .NewsType1107 a:hover, a:active{color:#ff0000; text-decoration:none;} .NewsType1107 a.l01:link, a.l01:visited, a.l01:hover, a.l01:active{color:#333333;} .NewsType1107 span.r, td.r{color:#ff0000;} .NewsType1107 table.tbl-semi td{padding:5px;} ?????BCP????????????????????????! ??????????????????????????????Oracle Enterprise Computing? ??????????????????????????????????Oracle Enterprise Computing?????????????????????? ??·?????????? >> ????????????????IT???????????????????? ???????????????????????ID??·??????????·?????3??????????????????????????????? ????????? >> ??????????????????????????????????????????????????????? Oracle EPM & BI Summit???????·?????????????????????????????????????·???????????????????????? ??·?????????? >> ???????????????????????????? ???5??????????????????????????????????????????????????????????????????????????????????? ??·?????????? >> -- ?????????????????????? ????????????????????????! ???????????????????????????????????????? ????????? >> ?????????????!??????????????? ? Sun????&?????·?????????????????????IT????????? ? ???????????·???????????????????IT???????????? ????????????? ? ?????????·????????????????????BI?? more solutions ? LIXIL ?????ERP?????????????????????????????????????????????? ? ?????????? Oracle EBS???·?????????????????????????????????????????? ? ????? Oracle EBS???/??????????????????????????????????????????????????????? more success stories IT?????????????????????????????????????·???·?????? >> ???????????????????????? ?? ???? ?? 7/6(?)10:30~18:00 ?????????? 2011 ?????????(??) 7/7(?)14:00~19:00 Java SE 7 ?????? ?????? ??????????(??) 7/13(?)13:30~16:45 ?????????????????????????? ??????????(??) 7/15(?)13:00~18:00 ?????!??????????????????????? ??????????(??) 7/20(?)9:30~17:50 ????·????????&????????2011 ?????????????(??) 7/20(?)13:30~17:00 ???????????????????????????? ??????????(??) 7/25(?)14:00~17:00 MySQL?????????????? ??????????(??) 7/26(?)13:30~17:45 Oracle Enterprise Computing Summit ???????????(??) Copyright © 2011, Oracle.All Rights Reserved. ???????????? | ???????????? | ??????????/????????

    Read the article

  • export data from WCF Service to excel

    - by Dave
    I need to provide an export to excel feature for a large amount of data returned from a WCF web service. The code to load the datalist is as below: List<resultSet> r = myObject.ReturnResultSet(myWebRequestUrl); //call to WCF service myDataList.DataSource = r; myDataList.DataBind(); I am using the Reponse object to do the job: Response.Clear(); Response.Buffer = true; Response.ContentType = "application/vnd.ms-excel"; Response.AddHeader("Content-Disposition", "attachment; filename=MyExcel.xls"); StringBuilder sb = new StringBuilder(); StringWriter sw = new StringWriter(sb); HtmlTextWriter tw = new HtmlTextWriter(sw); myDataList.RenderControl(tw); Response.Write(sb.ToString()); Response.End(); The problem is that WCF Service times out for large amount of data (about 5000 rows) and the result set is null. When I debug the service, I can see the window for saving/opening the excel sheet appear before the service returns the result and hence the excel sheet is always empty. Please help me figure this out.

    Read the article

  • new ActiveXObject('Word.Application') creates new winword.exe process when IE security does not allo

    - by Mark Ott
    We are using MS Word as a spell checker for a few fields on a private company web site, and when IE security settings are correct it works well. (Zone for the site set to Trusted, and trusted zone modified to allow control to run without prompting.) The script we are using creates a word object and closes it afterward. While the object exists, a winword.exe process runs, but it is destroyed when the word object is closed. If our site is not set in the trusted zone (Internet zone with default security level) the call that creates the word object fails as expected, but the winword.exe process is still created. I do not have any way to interact with this process in the script, so the process stays around until the user logs off (users have no way to manually destroy the process, and it wouldn't be a good solution even if they did.) The call that attempts to create the object is... try { oWordApplication = new ActiveXObject('Word.Application'); } catch(error) { // irrelevant code removed, described in comments.. // notify user spell check cannot be used // disable spell check option } So every time the page is loaded this code may be run again, creating yet another orphan winword.exe process. oWordApplication is, of course, undefined in the catch block. I would like to be able to detect the browser security settings beforehand, but I have done some searching on this and do not think that it is possible. Management here is happy with it as it is. As long as IE security is set correctly it works, and it works well for our purposes. (We may eventually look at other options for spell check functionality, but this was quick, inexpensive, and does everything we need it to do.) This last problem bugs me and I'd like to do something about it, but I'm out of ideas and I have other things that are more in need of my attention. Before I put it aside, I thought I'd ask for suggestions here...

    Read the article

  • Jquery image blur effect with in a div?

    - by bala3569
    Consider i have three images and one bannerDiv.... On initial page load i should show the first image and after sometimeout say 300ms i must show the second image and vise versa.... I have to blur the first image and show second image .... Any suggestion how it can be done with jquery... <div Id="BannerDiv" style="display:none;"> <img src="mylocation" alt="image1"/> <img src="mylocation" alt="image2"/> <img src="mylocation" alt="image3"/> </div> and my jquery function is, <script type="text/javascript"> $(document).ready(function() { //how to show first image and blur it to show second image after 300 ms }); </script> EDIT: 1st image to fade out after 300ms and show 2nd image 2nd image to fade out after 300ms and show 3rd image 3rd image to fade out after 300ms and show 1st image....

    Read the article

  • Running PowerShell from MSdeploy runcommand does not exit

    - by Peter Moberg
    Im am trying to get MSDeploy to execute a PowerShell script on a remote server. This is how i execute MSDeploy: msdeploy \ -verb:sync \ -source:runCommand='C:\temp\HelloWorld.bat', \ waitInterval=15000,waitAttempts=1 \ -dest:auto,computername=$WebDeployService$Credentials -verbose HelloWorld.bat contains: echo "Hello world!" powershell.exe C:\temp\WebDeploy\Package\HelloWorld.ps1 echo "Done" The HelloWorld.ps1 only contains: Write-Host "Hello world from PowerShell!" However, it seems like PowerShell never terminates. This is the output from running the msdeploy: Verbose: Performing synchronization pass #1. Verbose: Source runCommand (C:\temp\HelloWorld.bat) does not match destination (C:\temp\HelloWorld.bat) differing in attributes (isSource['True','False']). Update pending. Info: Updating runCommand (C:\temp\HelloWorld.bat). Info: Info: C:\temp>echo "Hello world!" "Hello world!" C:\temp\WebDeploy>powershell.exe C:\temp\HelloWorld.ps1 Info: Hello world from Powershell! Info: Warning: The process 'C:\Windows\system32\cmd.exe' (command line '/c "C:\Users\peter\AppData\Local\Temp\gaskgh55.b2q.bat "') is still running. Waiting for 15000 ms (attempt 1 of 1). Error: The process 'C:\Windows\system32\cmd.exe' (command line '/c "C:\Users\peter\AppData\Local\Temp\gaskgh55.b2q.bat"' ) was terminated because it exceeded the wait time. Error count: 1. Anyone knows a solution?

    Read the article

  • Managing Dependency Hell with WiX and C#

    - by Tom the Junglist
    We are on the eve of product launch, and at the last minute I am being bombarded with crash reports that appear to be related to our installer, which is a WiX3 project with separate outputs for x86 and x64 builds. These have been an ongoing problem that I always thought were fixed, only to find out that they were still lurking. The product itself is a collection of binaries that communicate with each other via .Net remoting, including a Windows Service and a small COM component that is loaded as an addon in another app. The service runs as SYSTEM, the COM piece runs in a low-rights context, while the other pieces run in normal user contexts. Other pieces include an third-party COM object library DLL and a shared DLL with the .net Remoting interfaces. I've observed flat-out weird behavior with MSI, particularly on version upgrades. Between MS' anal strong-name implementation (specifically, the exact version check before loading a given assembly), a documented WiX/MSI bug that sees critical files erased on upgrades (essentially, if a file in the upgrade MSI has the same version number as the existing install, that file is deleted), and having to work around Wow64 virtualization (x86 MSI can only write to registry/HD locations via Wow64, yet x64 MSIs cannot run on x86 computers...), I am about ready to trash the whole thing and port it over to a different install system. What I am looking for on tips + tricks, techniques, or suggestions on how to properly do things so that I am not fighting with Windows Installer's twisted sense of logic. I am tired of fighting with WiX/MSI/Windows Installer. All it needs to do is place files and registry keys where I tell it to, upgrade them when appropriate, and don't delete anything until the user uninstalls. Instead, dependencies are deleted willy-nilly, bringing up a whole bunch of uncatchable exceptions (can't wrap a try{} block around function declarations) and GPF'ing the whole app. I am particularly interested in 'best practices' and examples regarding shared and dependency DLLs, and any tips on making sure if a file needs to go to GAC, that it actually goes to the GAC and stays there until it is appropriate to remove it. Thanks! Tom

    Read the article

  • jQuery UI dialog on ASP.NET page (inside user control)

    - by marc_s
    I have a really odd behavior here: I created a little popup dialog in jQuery UI, and in my test HTML page, it works flawlessly. When I click on the button, the popup comes up, covers the background, and remains on screen until I click on one of the two buttons (OK or Cancel) provided. So now I wanted to add this into my ASP.NET 3.5 app. I wanted to add it to a GridView inside a user controls (ASCX), which is on a page (ASPX) contained inside a master page. The jQuery 1.4.2 and jQuery UI 1.8.1 scripts are referenced on the master page: <body> <form id="XXXXXX" runat="server"> <Ajax:ScriptManager ID="masterScriptManager" runat="server" ScriptMode="Auto"> <Scripts> <asp:ScriptReference Path="~/Scripts/jquery-1.4.2.min.js" /> <asp:ScriptReference Path="~/Scripts/jquery-ui-1.8.1.custom.min.js" /> </Scripts> </Ajax:ScriptManager> I had to change this to use the Ajax script manager, since adding them to the as never worked. So in my gridview, I have a column with image buttons, and when the user clicks on those, I am calling a little javascript function to show the jQuery UI dialog: function showDialog() { $("#dlg-discount").dialog('open'); $("#txtAmount").focus(); } When I run this page in MS IE 8, I get a separate page, and at the top of the page, I get the contents of my , with proper background color and all. In Firefox 3.5.6, I do get the dialog as a popup. In both cases, the dialog page/popup disappears again after a second or less - without me clicking anything! It seems similar to this question but the solution provided there doesn't work in my case. This one here also seems similar but again: the solution presented doesn't seem to work in my case... Any ideas / hints / tips on what the h** is going on here?? Thanks!

    Read the article

  • Applying Test Driven Development to a tightly coupled architecture

    - by Chris D
    Hi all, I've recently been studying TDD, attended a conference and have dabbled in few tests and already I'm 100% sold, I absolutely love it TDD. As a result I've raised this with my seniors and they are prepared to give it a chance, so they have tasked me with coming up with a way to implement TDD in the development of our enterprise product. The problem is our system has evolved since the days of VB6 to .NET and implements alot of legacy technology and some far from best practice development techniques i.e. alot of business logic in the ASP.NET code behind and client script. The largest problem however is how our classes are tightly coupled with database access; properties, methods, constructors - usually has some database access in some form or another. We use an in-house data access code generator tool that creates sqlDataAdapters that gives us all the database access we could ever want, which helps us develop extremely quickly, however, classes in our business layer are very tightly coupled to this data layer - we aren't even close to implementing some form of repository design. This and the issues above have created me all sorts of problems. I have tried to develop some unit tests for some existing classes I've already written but the tests take ALOT longer to run since db access is required, not to mention since we use the MS Enterprise Caching framework I am forced to fake a httpcontext for my tests to run successfully which isn't practical. Also, I can't see how to use TDD to drive the design of any new classes I write since they have to be soo tightly coupled to the database ... help! Because of the architecture of the system it appears I can't implement TDD without some real hack which in my eyes just defeats the aim of TDD and the huge benefits that come with. Does anyone have any suggestions how I could implement TDD with the constraints I'm bound too? or do I need to push the repository design pattern down my seniors throats and tell them we either change our architecture/development methodology or forget about TDD altogether? :) Thanks

    Read the article

  • Printer Redirection from 2003 Terminal Server to 2008 Terminal Server

    - by xmaveric
    Our environment is a terminal server cluster (Win2003 servers) that everyone connects to do do their work. I have set up a new Win2008 R2 machine with the intention of using it to publish our main application to the TS farm. The idea was to keep this server dedicated to one application to avoid driver/dll conflicts with other software. I created a RemoteApp on the new server and made an .rdp file and placed it on the desktop of our TS farm servers. The problem I am running into is that when I connect to the RemoteApp, it doesn't show the printers that are installed on the TS server I am connecting from. We have over 20 printers installed on our TS servers, each with different drivers and permissions. I really do not want to reinstall all of these on the RemoteApp server so I was hoping Printer Redirection would handle this. It would appear that because the RDP client for Server 2003 x64 is 6.0, that version doesn't support the Easy Print feature (requires 6.1). I can't find any newer version on the MS site to download for Win2003 x64. How can I get the printers on the TS farm machine to redirect so they are viewed by the RemoteApp machine?

    Read the article

  • How can I install asp.net mvc 2 on IIS7?

    - by Gary McGill
    I have developed an ASP.NET MVC 2 website, and now need to deploy it to my web server. I've overcome some hurdles already, since ASP.NET was not installed etc. but I've now got to the point where I can serve up plain content files, and if I try to hit one of my MVC URLs I get this: Could not load file or assembly 'System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified. Not surprising, that, as I've not installed MVC2. Problem is, I can't find any good information about how to install it! The Microsoft Download Center lists 3 files, none of which look promising: ASP.NET-MVC-2-RTM-Release-Notes.doc AspNetMVC2_VS2008.exe mvc2-ms-pl.zip The site doesn't bother to explain what the files actually are, but I assume that the last file is the source code. That's what it looks like, anyway. The release notes are no help whatsoever, since they're all about installing on your development machine, and indeed the name of the EXE makes it clear that that's all about Visual Studio integration too. So how do I actually deploy the darn thing? The other option linked to from Scott Gu's blog is the Microsoft Web Platform Installer. Now, I don't want to install more than just MVC2, and I already have IIS etc. set up, so this seems a bit heavy. But it's all academic, as it refuses to run on my server, saying "your system is not supported" or words to that effect. (The server is Windows Server 2008 Standard SP2, so I really don't know what it's problem is). Help! [It's ridiculous that this should be so hard - or perhaps not hard at all, but certainly a well-kept secret!]

    Read the article

  • Socket error 10052 on UDP socket

    - by Jesper
    We have a .NET 2.0 desktop application which sends and receives network packets over UDP. Several users have reported an occasional socket error 10052 which happens when the code calls socket.BeginReceiveFrom on a the UDP socket. What does this mean? The official MS documentation for socket error 10052 says - quote: "WSAENETRESET (10052) Network dropped connection on reset . The connection has been broken due to keep-alive activity detecting a failure while the operation was in progress. It can also be returned by setsockopt if an attempt is made to set SO_KEEPALIVE on a connection that has already failed." This just doesn't make much sense for a UDP socket since UDP is a connectionless protocol. I know that another close error code 10054 in connection with UDP sockets means that an ICMP message "Port Unreachable" was received, and I am wondering if 10052 might map to another ICMP message? I have googled this for months, read network books, etc. but can't find anything. Please help - what does socket error 10052 on a UDP socket mean? Thanks in advance

    Read the article

  • IIS 7.5, ASP.NET, impersonation, and access to C:\Windows\Temp

    - by Heinzi
    Summary: One of our web applications requires write access to C:\Windows\Temp. However, no matter how much I weaken the NTFS permission, procmon shows ACCESS DENIED. Background (which might or might not be relevant for the problem): We are using OLEDB to access an MS Access database (which is located outside of C:\Windows\Temp). Unfortunately, this OLEDB driver requires write access to the user profile's TEMP directory (which happens to be C:\Windows\Temp when running under IIS 7.5), otherwise the dreaded "Unspecified Error" OleDbException is thrown. See KB 926939 for details. I followed the steps in the KB article, but it doesn't help. Details: This is the output of icacls C:\Windows\Temp. For debugging purposes I gave full permissions to Everyone. C:\Windows\Temp NT AUTHORITY\SYSTEM:(OI)(CI)(F) CREATOR OWNER:(OI)(CI)(IO)(F) BUILTIN\IIS_IUSRS:(OI)(CI)(S,RD) BUILTIN\Users:(CI)(S,WD,AD,X) BUILTIN\Administrators:(OI)(CI)(F) Everyone:(OI)(CI)(F) However, this is the screenshot of procmon: Desired Access: Generic Read/Write, Delete Disposition: Create Options: Synchronous IO Non-Alert, Non-Directory File, Random Access, Delete On Close, Open No Recall Attributes: NT ShareMode: None AllocationSize: 0 Impersonating: MYDOMAIN\myuser

    Read the article

  • Retrieving the COM class factory for component error while generating word document

    - by TheDPQ
    Hello, I am trying to edit a word document from VB.NET using for the most part this code: How to automate Word from Visual Basic .NET to create a new document http://support.microsoft.com/kb/316383 It works fine on my machine but when i publish to the server i get the following error. Retrieving the COM class factory for component with CLSID {000209FF-0000-0000-C000-000000000046} failed due to the following error: 80070005. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.UnauthorizedAccessException: Retrieving the COM class factory for component with CLSID {000209FF-0000-0000-C000-000000000046} failed due to the following error: 80070005. The actual error happens when i try to just create a word application object Dim oWord As New Word.Application Using Visual Studio 2008 and VB.NET 3.5. I made a reference to the "Microsoft Word 10.0 Object Library" and i see Interop.Word.dll file in the bin directory. Using MS Office 2003 on development machine and Windows Server 2003 Still fairly new to .NET and don't have much knowledge about window server, but "UnauthorizedAccessException" sounds like a permission issue. I'm wondering if someone could point me in the right direction on what i might need to do to give my little application access to use word. Thank you so much for your time.

    Read the article

  • Complex SQL Query similar to a z order problem

    - by AaronLS
    I have a complex SQL problem in MS SQL Server, and in drawing on a piece of paper I realized that I could think of it as a single bar filled with rectangles, each rectangle having segments with different Z orders. In reality it has nothing to do with z order or graphics at all, but more to do with some complex business rules that would be difficult to explain. Howoever, if anyone has ideas on how to solve the below that will give me my solution. I have the following data: ObjectID, PercentOfBar, ZOrder (where smaller is closer) A, 100, 6 B, 50, 5 B, 50, 4 C, 30, 3 C, 70, 6 The result of my query that I want is this, in any order: PercentOfBar, ZOrder 50, 5 20, 4 30, 3 Think of it like this, if I drew rectangle A, it would fill 100% of the bar and have a z order of 6. 66666666666 AAAAAAAAAAA If I then layed out rectangle B, consisting of two segments, both segments would cover up rectangle A resulting in the following rendering: 4444455555 BBBBBBBBBB As a rule of thumb, for a given rectangle, it's segments should be layed out such that the highest z order is to the right of the lower Z orders. Finally rectangle C would cover up only portions of Rectangle B with it's 30% segment that is z order 3, which would be on the left. You can hopefully see how the is represented in the output dataset I listed above: 3334455555 CCCBBBBBBB Now to make things more complicated I actually have a 4th column such that this grouping occurs for each key: Input: SomeKey, ObjectID, PercentOfBar, ZOrder (where smaller is closer) X, A, 100, 6 X, B, 50, 5 X, B, 50, 4 X, C, 30, 3 X, C, 70, 6 Y, A, 100, 6 Z, B, 50, 2 Z, B, 50, 6 Z, C, 100, 5 Output: SomeKey, PercentOfBar, ZOrder X, 50, 5 X, 20, 4 X, 30, 3 Y, 100, 6 Z, 50, 2 Z, 50, 5 Notice in the output, the PercentOfBar for each SomeKey would add up to 100%. This is one I know I'm going to be thinking about when I go to bed tonight. Just to be explicit and have a question: What would be a query that would produce the results described above?

    Read the article

  • Visual Studio 2010 Web Deployment

    - by Cranialsurge
    I am trying to use VS2010's 1-Click Publish feature to deploy a test site from my laptop to my server. I have the firewall turned off on both machines and the MS Deployment Service is up and running on both my laptop and the server. However when I try and publish from VS2010 on my laptop I get the following error Error 1 Web deployment task failed.(Remote agent (URL https://192.168.1.181/:8172/msdeploy.axd?site=LocationsTest) could not be contacted. Make sure the remote agent service is installed and started on the target computer.) The requested resource does not exist, or the requested URL is incorrect. Error details: Remote agent (URL https://192.168.1.181/:8172/msdeploy.axd?site=LocationsTest) could not be contacted. Make sure the remote agent service is installed and started on the target computer. An unsupported response was received. The response header 'MSDeploy.Response' was '' but 'v1' was expected. The remote server returned an error: (404) Not Found. 0 0 Test.Web Any idea what I am doing wrong here ?

    Read the article

  • OAuthWebSecurity.VerifyAuthentication IsSuccessful returns false how do I to determine the reason?

    - by Eonasdan
    I'm using DotNetOpenAuth with a MVC 4 application. All the sudden Google auth is failing (MS is working). The stock code does this: [AllowAnonymous] public ActionResult ExternalLoginCallback(string returnUrl) { var result = OAuthWebSecurity.VerifyAuthentication(Url.Action("ExternalLoginCallback", new { ReturnUrl = returnUrl })); if (!result.IsSuccessful) { return RedirectToAction("ExternalLoginFailure"); } I know that result.IsSuccessful is false, but how do I get the reason? result.Error is null. I also looked at this page to use log4net. I do get a log on the local dev box but not when I deploy it to a remote server. log4net webconfig: <log4net> <appender name="RollingFileAppender" type="log4net.Appender.RollingFileAppender"> <file value="RelyingParty.log" /> <appendToFile value="true" /> <rollingStyle value="Size" /> <maxSizeRollBackups value="10" /> <maximumFileSize value="100KB" /> <staticLogFileName value="true" /> <layout type="log4net.Layout.PatternLayout"> <conversionPattern value="%date (GMT%date{%z}) [%thread] %-5level %logger - %message%newline" /> </layout> </appender> <!-- Setup the root category, add the appenders and set the default level --> <root> <level value="INFO" /> <appender-ref ref="RollingFileAppender" /> </root> <!-- Specify the level for some specific categories --> <logger name="DotNetOpenAuth"> <level value="ALL" /> </logger> </log4net> Edit I also tried log4net to a sql db but it still didn't log anything

    Read the article

  • Google Datastore w/ JDO: Access Times?

    - by Bosh
    I'm hitting what appears (to me) strange behavior when I pull data from the google datastore over JDO. In particular, the query executes quickly (say 100 ms), but finding the size of the resulting List< takes about one second! Indeed, whatever operation I try to perform on the resulting list takes about a second. Has anybody seen this behavior? Is it expected? Unusual? Any way around it? PersistenceManager pm = PMF.getPersistenceManager(); Query q = pm.newQuery("select from " + Person.class.getName() +" order by key limit 1000 "); System.out.println("getting all at " + System.currentTimeMillis()); mcs = (List<Med>) q.execute(); System.out.println("got all at " + System.currentTimeMillis()); int size = mcs.size(); System.out.println("size was " + size + " at " + System.currentTimeMillis()); getting all at 1271549139441 got all at 1271549139578 size was 850 at 1271549141071 -B

    Read the article

< Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >