Search Results

Search found 7676 results on 308 pages for 'delphi 2012'.

Page 223/308 | < Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >

• Cannot start serial over lan on iDrac6

  - by Bryan Agee

  I have a couple of Dell R610/R710 servers loaded with iDrac6 system management boards. I figured out how to log into the SM CLP with ssh. According to the dell documentation, I should be able to start a console session by running: start /system1/sol1 but I get the following failure message: cmdstat status : 3 status_tag : COMMAND EXECUTION FAILED job job_id : 12 joberr errtype : 1 errtype_desc : Other cimstat : 6 cimstat_desc : CIM_ERR_NOT_FOUND severity : 2 severity_desc : Low /system1/sol1 started FAILED at Sun Sep 16 00:20:58 2012 I have enabled the serial-over-lan via the web interface and rebooted, but nothing seems to make them available.

  Read the article

• Why am I getting warnings about missing DLLs when adding a node to a WSFC?

  - by Stuart Branham

  We're getting the following two errors when adding a node to our WSFC. The node was added successfully, but the 'SQL Server Availability Group' resource type could not be installed on it. Unable to find 'hadrres.dll' on any of the cluster nodes. The node was added successfully, but the 'SQL Server FILESTREAM Share' resource type could not be installed on it. Unable to find 'fssres.dll' on any of the cluster nodes. This cluster is going to host an AlwaysOn Availability Group. SQL Server 2012 is installed on both nodes, and availability groups are enabled on both. Filestream access is also configured on both. Another curious thing I'm seeing is that my instance on the second node doesn't appear in Configuration Manager. Anyone know what may be going on here?

  Read the article

• SPF Failure sending sms message to sms.mycricket.com

  - by CodeGurl

  I built an asp.net application that sends text messages to our employees using carrier-provided email to SMS gateways. The people on Cricket (sms.mycricket.com) are the only ones that are bouncing with a return message like this: Unknown address error SPF FAILURE/Sender has no SPF records: SEE RFC 4408 - FROM check failed: Received: from unknown (HELO servername.domainname.com) ([ipaddress]) by .... with ESMTP/TLS/DHE-RSA-AES256-SHA; 14 Nov 2012 06:22:56 -0600 From my research it looks like we may need to setup something in DNS for the Sender Policy Framework. I'm not in the networking group so I don't know much about this. How can this be done? http://en.wikipedia.org/wiki/Sender_Policy_Framework

  Read the article

• Cannot find one or more components. Please reinstall application

  - by Chris

  I am running Windows 8, 64 bit and have SQL Server 2012 installed. I downloaded the client tools, looked in the directory for SQL Server Management Studio, and see it's there. When I try to run SQL Management Studio I receive the error message: "Cannot find one or more components. Please reinstall application". This problem just started. I have reinstalled the application and downloaded the service packs. The shortcut key shows the path but it still will not run.

  Read the article

• How to disable SSLCompression on Apache httpd 2.2.15?

  - by Stefan Lasiewski

  I read about the CRIME attack against TLS Compression (CRIME is a successor to the BEAST attack against ssl & tls), and I want to protect my webservers against this attack by disabling SSL Compression, which was added to Apache 2.2.22 (See Bug 53219). I am running Scientific Linux 6.1, which ships with httpd-2.2.15. Security fixes for upstream versions of httpd 2.2 should be backported to this version. # rpm -q httpd httpd-2.2.15-15.sl6.1.x86_64 # httpd -V Server version: Apache/2.2.15 (Unix) Server built: Feb 14 2012 09:47:14 Server's Module Magic Number: 20051115:24 Server loaded: APR 1.3.9, APR-Util 1.3.9 Compiled using: APR 1.3.9, APR-Util 1.3.9 I tried SSLCompression off in my configuration, but that results in the following error message: # /etc/init.d/httpd restart Stopping httpd: [ OK ] Starting httpd: Syntax error on line 147 of /etc/httpd/httpd.conf: Invalid command 'SSLCompression', perhaps misspelled or defined by a module not included in the server configuration [FAILED] Is it possible to disable SSLCompression with this version of Apache Webserver?

  Read the article

• High Tq values for HAProxy

  - by Will

  I just took over administration of a new environment. A known issue is that the environment is known for high response times (20+ seconds), so I figured I'd turn on haproxy logging and see what is going on. I figured I'd see slow load times in the app servers, but I'm actually seeing high Tq values in HAProxy. The HAProxy is on EC2 and is NOT behind ELB. Sep 5 14:22:00 haproxy-apps01 haproxy[24695]: 76.14.153.221:3371 [05/Sep/2012:14:21:49.780] http-in default_apps/fe04-c 10936/0/0/55/10991 200 488 - - ---- 111/111/0/1/0 0/0 "GET /event_times/next?callback=jQuery170189312373075111_1346854917562&_=1346854918453 HTTP/1.1" As you can see, this one has a Tq of about 10 seconds. Not all the Tq's are high (1+ seconds), but a good percentage of them are (approx 35%). Normally when I see this behavior, I'd expect there to be network issues, but this is an incredibly high percentage of visitors to be having an issue like this, so I'm wondering if anybody has seen this or have any hints on diagnosing if the issue could possibly be on this box?

  Read the article

• Shared Excel WorkBook is locked by another user

  - by Simone

  I’ve been trying everything; this is the last chance I have. I moved folders and files from an old Windows Server 2003 File Server to a new FS (Win Server 2008 R2) with DFS and ABE enabled. Now, a specific Shared Excel file is driving me crazy, out of a sudden, lots of times per day, users are getting the following error while opening that file: Filename.xlsx is locked for editing by ‘another user’. Open ‘Read-Only’ or, click ‘Notify’ to open.. I’ve already followed this, with no joy: http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/05/14/the-definitive-locked-file-post.aspx In any case, I strongly think this is not client-related, since it never gave that problem in the past with Windows Server 2003. I’ve found and followed many other solutions, nothing. The users are all utilizing Office 2010 on Windows 7 machines, besides a few users who are still on Windows XP machines. I appreciate any help, thank you!

  Read the article

• Shared Excel WorkBook is locked by another user

  - by Simone

  I’ve been trying everything; this is the last chance I have. I moved folders and files from an old Windows Server 2003 File Server to a new FS (Win Server 2008 R2) with DFS and ABE enabled. Now, a specific Shared Excel file is driving me crazy, out of a sudden, lots of times per day, users are getting the following error while opening that file: Filename.xlsx is locked for editing by ‘another user’. Open ‘Read-Only’ or, click ‘Notify’ to open.. I’ve already followed this, with no joy: http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/05/14/the-definitive-locked-file-post.aspx In any case, I strongly think this is not client-related, since it never gave that problem in the past with Windows Server 2003. I’ve found and followed many other solutions, nothing. The users are all utilizing Office 2010 on Windows 7 machines, besides a few users who are still on Windows XP machines. I appreciate any help, thank you!

  Read the article

• NPS EAP authentication failing after Windows Update

  - by sqlreader

  I have a Windows 2008 Std server running NPS. After applying the latest round of updates (including Root Certificates for April 2012 KB931125 (See:http://support.microsoft.com/kb/933430/)), EAP authentication is failing due to being malformed. Sample error (Security/Event ID 6273), truncated for brevity: Authentication Details: Proxy Policy Name: Use Windows authentication for all users Network Policy Name: Wireless Access Authentication Provider: Windows Authentication Server: nps-host.corp.contoso.com Authentication Type: PEAP EAP Type: - Account Session Identifier: - Reason Code: 266 Reason: The message received was unexpected or badly formatted. The NPS policy (Wireless Access) is configured accordingly (for Constraints/Authentication methods) EAP Types: Microsoft: Protected EAP (PEAP) - with a valid certificate from ADCS Microsoft: Secured password (EAP-MSCHAP v2) Less secure authentication methods: Microsoft Encrypted Authentication version 2 (MS-CHAP-v2) User can change password after it has expired Microsoft Encrypted Authentication (MS-CHAP) User can change password after it has expired We've tested a different RADIUS server without the aforementioned patch, and removed EAP as an authentication type and experienced success. Has anyone else experienced this issue?

  Read the article

• Windows 8.1 Enterprise Sysprep Error

  - by Anurag Shetti

  I am Trying to sysprep my WIndows 8.1 enterprise (MSDN) and i get the following errors I have upgraded the Windows 8 to windows 8.1 and the machine contains all the configuration for VS 2012 and rest Exact error Sysprep was not able to validate your windows installation Error msg line in log C:\Users\André>err 0x8007139f # as an HRESULT: Severity: FAILURE (1), FACILITY_WIN32 (0x7), Code 0x139f # for hex 0x139f / decimal 5023 ERROR_INVALID_STATE winerror.h # The group or resource is not in the correct state to # perform the requested operation. # 1 matches found for "0x8007139f" SYSPRP ActionPlatform::GetValue: Error from RegQueryValueEx on value SysprepMode under key HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Setup\Sysprep; dwRet = 0x2 I have searched the HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Setup\Sysprep But i coud'nt find anything for SYSprep mode The value for sysprep was (Value not set)

  Read the article

• Powershell - Set-ClusteredScheduledTask - Error "Incorrect function."

  - by NealWalters

  I'm experimenting with Powershell to add a ClusteredScheduledTask on a clustered server (Win 2012/R2) Technet sample code gives error: #canned exampled from http://technet.microsoft.com/en-us/library/jj649815.aspx $Action01 = New-ScheduledTaskAction -Execute Notepad $Action02 = New-ScheduledTaskAction -Execute Calc Set-ClusteredScheduledTask -TaskName "Task03" -Action $Action01,$Action02 Error: Set-ClusteredScheduledTask : Incorrect function. At I:\Scripts\TaskSchedulerSetupJobs\TestWebSampleCode.ps1:4 char:1 + Set-ClusteredScheduledTask -TaskName "Task03" -Action $Action01,$Action02 + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : NotSpecified: (PS_ClusteredScheduledTask:Root/Microsoft/...edScheduledTask) [Set-ClusteredScheduledTask], CimException + FullyQualifiedErrorId : HRESULT 0x80070001,Set-ClusteredScheduledTask Added: As KrisFR pointed out below, I really meant to do a Register, not Set, but I still get the same basic error: #canned exampled from http://technet.microsoft.com/en-us/library/jj649815.aspx cls $Trigger = New-ScheduledTaskTrigger -At 12:00 -Once $Action01 = New-ScheduledTaskAction -Execute Notepad Register-ClusteredScheduledTask -TaskName "Task03" -Trigger $Trigger -Action $Action01 Error: Register-ClusteredScheduledTask : The parameter is incorrect. At I:\Scripts\TaskSchedulerSetupJobs\TestWebSampleCode.ps1:5 char:1 + Register-ClusteredScheduledTask -TaskName "Task03" -Trigger $Trigger -Action $Ac ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidArgument: (PS_ClusteredScheduledTask:Root/Microsoft/...edScheduledTask) [Register-ClusteredScheduledTask], CimExce ption + FullyQualifiedErrorId : HRESULT 0x80070057,Register-ClusteredScheduledTask

  Read the article

• c# - PubNub JSON serialization code works in example project but not in my project

  - by pilau

  I am making a Winamp plugin with the single function of sending the details of the song being played over HTTP to a webpage. It works like this: Winamp song event triggered - check for new song - publish to webpage using PubNub (C# API). So far I got to the stage where everything works exactly as it is supposed to, except for the PubNub code which doesn't serialize the object I'm passing for publishing into JSON. All I keep getting in the PubNub console is a mere {} - an empty JSON object. A little background on the project structure: I am using Sharpamp which is a custom library that enables making Winamp plugins with C#. I am also using the PubNub C# API. The gen_notifier_cs project is the C++ plugin wrapper created by Sharpamp. notifier_cs is where all my code resides. The two other projects are self explanatory I assume. I have referenced the PubNub API in notifier_cs, and also have referenced Sharpamp in both notifier_cs and PubNub API. So, the objects that need to get serialized are of a class Song as defined in Sharpamp: public class Song { public string Title { get; internal set; } public string Artist { get; internal set; } public string Album { get; internal set; } public string Year { get; internal set; } public bool HasMetadata { get; internal set; } public string Filename { get; internal set; } } So let's say if I have a song object with song data in it, I would go pubnub.publish("winamp_pipe", song); to publish it and PubNub will automatically serialize the data into JSON. But that's just not working in my solution. To test why it wasn't serializing, I copied that class to the example code file in the PubNub API. Visual Studio changed the class to this (notice the public Song() method): public class Song { public Song() { return; } public string Album { get; set; } public string Artist { get; set; } public string Filename { get; set; } public bool HasMetadata { get; set; } public string Title { get; set; } public string Year { get; set; } } On the same example file I initiated a default song object with some values: Song song = new Song(); song.Album = "albumname"; song.Artist = "artistname"; song.HasMetadata = true; song.Title = "songtitle"; song.Year = "2012"; And published it: pubnub.publish("winamp_pipe", song); and it worked! I got the JSON object in the PubNub channel! {"Album":"albumname","Artist":"artistname","Filename":null,"HasMetadata":true,"Title":"songtitle","Year":"2012"} So, I tried replacing the "new" Song class with the original one defined in Sharpamp. I tried adding another class definition in the notifier_cs project but that clashes with the one in Sharpamp which I have to rely on. I have been trying so many things as far as I could come up with. Needless to say none prevailed. Still, all I get is an empty JSON object. I have been pulling out my hair for the last day. I know this post is super long but I appreciate your input nonetheless. Thanks in advance.

  Read the article

• Install RT Failed: DateTime >= 0.44 ...MISSING

  - by javano

  I am trying to install RT-4.0.5 (Request Tracker) but I keep getting the following output; $ make fixdeps <output cut> SOME DEPENDENCIES WERE MISSING. CORE missing dependencies: DateTime >= 0.44 ...MISSING make: *** [fixdeps] Error 1 The full output is here (it's quite long); http://pastebin.com/raw.php?i=Tn7GrkYw $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 8.04.4 LTS Release: 8.04 Codename: hardy $ perl --version This is perl 5, version 14, subversion 2 (v5.14.2) built for i686-linux $ cpan --version /usr/local/bin/cpan version 1.57 calling Getopt::Std::getopts (version 1.06 [paranoid]), running under Perl version 5.14.2. [Now continuing due to backward compatibility and excessive paranoia. See ``perldoc Getopt::Std'' about $Getopt::Std::STANDARD_HELP_VERSION.] Nothing to install! I can't see why this is a problem; $ cpan DateTime Going to read '/root/.cpan/Metadata' Database was generated on Thu, 08 Mar 2012 16:11:26 GMT DateTime is up to date (0.72).

  Read the article

• Is my PC Good enough [closed]

  - by Moinak Nath

  I'm getting a new laptop this Christmas and I was wondering if it's good enough for what I do. I'll be playing games like Need for Speed: Most Wanted (2012) and other NFS games. Also silent hunter and flight sim. I also browse the internet download stuff like, watch movies occasionally type documents with word, edit videos, and transfer files. To be more specific is the hdd big enough? is the ram big enough? Is the graphics card good? is the cpu speed enough, and is Windows windows 8 good for all these things. i also video chat so these are the specs 2.2 Ghz Intel Pentium B960 Dual Core 4 GB RAM 320 GB HDD Intel HD Graphics 720p Webcam 4 USB Ports (2 USB 3.0 @ 2 USB 2.0) HDMI Port It Is a Lenovo IdeaPad This is the one im Looking at http://www.bestbuy.com/site/Lenovo+-+IdeaPad+15.6%26%2334%3B+Laptop+-+4GB+Memory+-+320GB+Hard+Drive+-+Black/6851264.p?id=1218809260330&skuId=6851264#tab=specifications

  Read the article

• Operation not permitted when starting Unicorn

  - by fiskeben

  I've created an nginx/unicorn/capistrato setup on Ubuntu (Amazon EC2) by following mostly this guide. I guess everything is set up like it should but when I start Unicorn I get (a LOT of) this error in the log: E, [2012-09-08T08:57:20.658092 #12356] ERROR -- : Operation not permitted (Errno::EPERM) /home/deployer/apps/bridgekalenderen.no/shared/bundle/ruby/1.9.1/gems/unicorn-4.3.1/lib/unicorn/worker.rb:82:in `initgroups' I see it's related to the user's permissions but I just can't figure out what I've left out. The server starts up nicely if I start it with sudo (or, rvmsudo, really). The user has sudo capabilities, I have chmod'ed the app several times so the file permissions there should be ok. The unicorn socket in /tmp is owned by the deployer user, so that shouldn't be the problem either. Does anybody have a clue where to look?

  Read the article

• Mounting NFS share between OSX and Centos VM

  - by Adam

  I'm having issues mounting an NFS share I've made on my Mac host (server) from a Centos VM (client). I'm getting a permission denied error. I have this line in /etc/exports on server: /Users/adam/Sites/ 192.168.1.223(rw) and in /etc/fstab on client: 192.168.1.186:/Users/adam/Sites/ /home/adam/Sites/ nfs rw 0 0 I'm sure this is a simple configuration issue, but I've never set up NFS properly before. Extra info: # mount -v 192.168.1.186:/Users/adam/Sites/ /home/adam/Sites/ mount: no type was given - I'll assume nfs because of the colon mount.nfs: timeout set for Mon Nov 26 07:31:40 2012 mount.nfs: trying text-based options 'vers=4,addr=192.168.1.186,clientaddr=192.168.1.223' mount.nfs: mount(2): Protocol not supported mount.nfs: trying text-based options 'addr=192.168.1.186' mount.nfs: prog 100003, trying vers=3, prot=6 mount.nfs: trying 192.168.1.186 prog 100003 vers 3 prot TCP port 2049 mount.nfs: prog 100005, trying vers=3, prot=17 mount.nfs: trying 192.168.1.186 prog 100005 vers 3 prot UDP port 958 mount.nfs: mount(2): Permission denied mount.nfs: access denied by server while mounting 192.168.1.186:/Users/adam/Sites/

  Read the article

• Execute Backup-SqlDatabase cmdlet remotely

  - by Maxim V. Pavlov

  When I run the following script line locally on an SQL Server machine, it executes perfectly: Backup-SqlDatabase -ServerInstance $serverName -Database $sqldbname -BackupFile "$($backupFolder)$($dbname)_db_$($addinionToName).bak" $serverName contains a short name of the SQL Server instance. SQL Server is 2012, so these new cmdlets work like a charm. On the other hand, when I am trying to perform a DB backup from a TeamCity agent machine like this (Through Invoke-Command cmdlet): function BackupDB([String] $serverName, [String] $sqldbname, [String] $backupFolder, [String] $addinionToName) { Import-Module SQLPS -DisableNameChecking Backup-SqlDatabase -ServerInstance $serverName -Database $sqldbname -BackupFile "$($backupFolder)$($dbname)_db_$($addinionToName).bak" } Invoke-Command -computername $SQLComputerName -Credential $credentials -ScriptBlock ${function:BackupDB} -ArgumentList $SQLInstanceName, $DatabaseName, $BackupDirectory, $BakId results in an error: Failed to connect to server $serverName. + CategoryInfo : NotSpecified: (:) [Backup-SqlDatabase], ConnectionFailureException + FullyQualifiedErrorId : Microsoft.SqlServer.Management.Common.ConnectionFailureException,Microsoft.SqlServer.M anagement.PowerShell.BackupSqlDatabaseCommand What is the correct way to execute Backup-SqlDatabase cmdlet remotely?

  Read the article

• Setting up Zend Framework 2 on GoDaddy

  - by Yossi

  I tried setting up ZF2 on the GoDaddy shared servers, though it doesn't work. I tried to download it directly, and using the git composer (which I managed to install successfully on the server). The error I'm receiving from PHP is this: Warning: Unexpected character in input: '\' (ASCII=92) state=1 in /home/content/82/5123082/html/tmp/ZendSkeletonApplication/public/index.php on line 12 Parse error: syntax error, unexpected T_STRING in /home/content/82/5123082/html/tmp/ZendSkeletonApplication/public/index.php on line 12 The PHP version the account is running: PHP 5.3.13 (cli) (built: May 14 2012 16:26 The Linux server that is used is: Linux ...secureserver.net ... #1 SMP Fri Jul 15 08:15:44 EDT 2011 i686 i686 i386 GNU/Linux CentOS release 5.5 (Final) Any ideas what I'm doing wrong? I never worked with ZF1, and I know there are custom solution out there for ZF1, but I didn't manage to port them into ZF2.

  Read the article

• Getting USB boot to work in SmartOS on HP ProLiant N40L

  - by user126579

  I recently downloaded SmartOS and tried running it on my HP ProLiant N40L, but it always fails on boot. After dd'ing the image to the USB stick, I plug it into the internal USB header and turn the machine on. After selecting from GRUB, it displays the following: , bss=0x0 It sits there for 2-4 minutes, then finally boots the OS and displays the following: WARNING: Couldn't read ACPI SRAT table from BIOS. lgrp support will be limited to one group. SunOS Release 5.11 Version joyent_20120614T184600Z 64-bit Copyright (c) 2010-2012, Joyent Inc. All rights reserved. WARNING: kvm: no hardware support After that, it hangs. I've tried this with two different USB sticks. I've seen some mentions on the SmartOS website about people running it on an N40L, booting from USB, so maybe it's just broken hardware? Has anyone gotten this working?

  Read the article

• Linux - Only first virtual interface can ping external gateway

  - by husvar

  I created 3 virtual interfaces with different mac addresses all linked to the same physical interface. I see that they successfully arp for the gw and they can ping (the request is coming in the packet capture in wireshark). However the ping utility does not count the responses. Does anyone knows the issue? I am running Ubuntu 14.04 in a VmWare. root@ubuntu:~# ip link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff inet6 fe80::20c:29ff:febc:fc8b/64 scope link valid_lft forever preferred_lft forever root@ubuntu:~# ip route sh root@ubuntu:~# ip link add link eth0 eth0.1 addr 00:00:00:00:00:11 type macvlan root@ubuntu:~# ip link add link eth0 eth0.2 addr 00:00:00:00:00:22 type macvlan root@ubuntu:~# ip link add link eth0 eth0.3 addr 00:00:00:00:00:33 type macvlan root@ubuntu:~# ip -4 link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff 18: eth0.1@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:11 brd ff:ff:ff:ff:ff:ff 19: eth0.2@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:22 brd ff:ff:ff:ff:ff:ff 20: eth0.3@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:33 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip -4 addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever root@ubuntu:~# ip -4 route sh root@ubuntu:~# dhclient -v eth0.1 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.1/00:00:00:00:00:11 Sending on LPF/eth0.1/00:00:00:00:00:11 Sending on Socket/fallback DHCPDISCOVER on eth0.1 to 255.255.255.255 port 67 interval 3 (xid=0x568eac05) DHCPREQUEST of 192.168.1.145 on eth0.1 to 255.255.255.255 port 67 (xid=0x568eac05) DHCPOFFER of 192.168.1.145 from 192.168.1.254 DHCPACK of 192.168.1.145 from 192.168.1.254 bound to 192.168.1.145 -- renewal in 1473 seconds. root@ubuntu:~# dhclient -v eth0.2 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.2/00:00:00:00:00:22 Sending on LPF/eth0.2/00:00:00:00:00:22 Sending on Socket/fallback DHCPDISCOVER on eth0.2 to 255.255.255.255 port 67 interval 3 (xid=0x21e3114e) DHCPREQUEST of 192.168.1.146 on eth0.2 to 255.255.255.255 port 67 (xid=0x21e3114e) DHCPOFFER of 192.168.1.146 from 192.168.1.254 DHCPACK of 192.168.1.146 from 192.168.1.254 bound to 192.168.1.146 -- renewal in 1366 seconds. root@ubuntu:~# dhclient -v eth0.3 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.3/00:00:00:00:00:33 Sending on LPF/eth0.3/00:00:00:00:00:33 Sending on Socket/fallback DHCPDISCOVER on eth0.3 to 255.255.255.255 port 67 interval 3 (xid=0x11dc5f03) DHCPREQUEST of 192.168.1.147 on eth0.3 to 255.255.255.255 port 67 (xid=0x11dc5f03) DHCPOFFER of 192.168.1.147 from 192.168.1.254 DHCPACK of 192.168.1.147 from 192.168.1.254 bound to 192.168.1.147 -- renewal in 1657 seconds. root@ubuntu:~# ip -4 link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff 18: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:11 brd ff:ff:ff:ff:ff:ff 19: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:22 brd ff:ff:ff:ff:ff:ff 20: eth0.3@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:33 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip -4 addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 18: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.145/24 brd 192.168.1.255 scope global eth0.1 valid_lft forever preferred_lft forever 19: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.146/24 brd 192.168.1.255 scope global eth0.2 valid_lft forever preferred_lft forever 20: eth0.3@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.147/24 brd 192.168.1.255 scope global eth0.3 valid_lft forever preferred_lft forever root@ubuntu:~# ip -4 route sh default via 192.168.1.254 dev eth0.1 192.168.1.0/24 dev eth0.1 proto kernel scope link src 192.168.1.145 192.168.1.0/24 dev eth0.2 proto kernel scope link src 192.168.1.146 192.168.1.0/24 dev eth0.3 proto kernel scope link src 192.168.1.147 root@ubuntu:~# arping -c 5 -I eth0.1 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.145 eth0.1 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 6.936ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.986ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 0.654ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 5.137ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.426ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# arping -c 5 -I eth0.2 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.146 eth0.2 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 5.665ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 3.753ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 16.500ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 3.287ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 32.438ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# arping -c 5 -I eth0.3 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.147 eth0.3 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 4.422ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.429ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.321ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 40.423ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.268ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# tcpdump -n -i eth0.1 -v & [1] 5317 root@ubuntu:~# ping -c5 -q -I eth0.1 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.145 eth0.1: 56(84) bytes of data. tcpdump: listening on eth0.1, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:37.612558 IP (tos 0x0, ttl 64, id 2595, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 2, length 64 13:18:37.618864 IP (tos 0x68, ttl 64, id 14493, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 2, length 64 13:18:37.743650 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:38.134997 IP (tos 0x0, ttl 128, id 23547, offset 0, flags [none], proto UDP (17), length 229) 192.168.1.86.138 > 192.168.1.255.138: NBT UDP PACKET(138) 13:18:38.614580 IP (tos 0x0, ttl 64, id 2596, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 3, length 64 13:18:38.793479 IP (tos 0x68, ttl 64, id 14495, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 3, length 64 13:18:39.151282 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:39.615612 IP (tos 0x0, ttl 64, id 2597, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 4, length 64 13:18:39.746981 IP (tos 0x68, ttl 64, id 14496, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 4, length 64 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4008ms rtt min/avg/max/mdev = 2.793/67.810/178.934/73.108 ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 9 packets captured 12 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.1 -v root@ubuntu:~# tcpdump -n -i eth0.2 -v & [1] 5320 root@ubuntu:~# ping -c5 -q -I eth0.2 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.146 eth0.2: 56(84) bytes of data. tcpdump: listening on eth0.2, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:41.536874 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.254 is-at 58:98:35:57:a0:70, length 46 13:18:41.536933 IP (tos 0x0, ttl 64, id 2599, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 1, length 64 13:18:41.539255 IP (tos 0x68, ttl 64, id 14507, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 1, length 64 13:18:42.127715 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:42.511725 IP (tos 0x0, ttl 64, id 2600, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 2, length 64 13:18:42.514385 IP (tos 0x68, ttl 64, id 14527, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 2, length 64 13:18:42.743856 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:43.511727 IP (tos 0x0, ttl 64, id 2601, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 3, length 64 13:18:43.513768 IP (tos 0x68, ttl 64, id 14528, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 3, length 64 13:18:43.637598 IP (tos 0x0, ttl 128, id 23551, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 255.255.255.255.17500: UDP, length 197 13:18:43.641185 IP (tos 0x0, ttl 128, id 23552, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 192.168.1.255.17500: UDP, length 197 13:18:43.641201 IP (tos 0x0, ttl 128, id 23553, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 255.255.255.255.17500: UDP, length 197 13:18:43.743890 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:44.510758 IP (tos 0x0, ttl 64, id 2602, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 4, length 64 13:18:44.512892 IP (tos 0x68, ttl 64, id 14538, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 4, length 64 13:18:45.510794 IP (tos 0x0, ttl 64, id 2603, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 5, length 64 13:18:45.519701 IP (tos 0x68, ttl 64, id 14539, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 5, length 64 13:18:49.287554 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:50.013463 IP (tos 0x0, ttl 255, id 50737, offset 0, flags [DF], proto UDP (17), length 73) 192.168.1.146.5353 > 224.0.0.251.5353: 0 [2q] PTR (QM)? _ipps._tcp.local. PTR (QM)? _ipp._tcp.local. (45) 13:18:50.218874 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:51.129961 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:52.197074 IP6 (hlim 255, next-header UDP (17) payload length: 53) 2001:818:d812:da00:200:ff:fe00:22.5353 > ff02::fb.5353: [udp sum ok] 0 [2q] PTR (QM)? _ipps._tcp.local. PTR (QM)? _ipp._tcp.local. (45) 13:18:54.128240 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 0 received, 100% packet loss, time 4000ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 13:18:54.657731 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:54.743174 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 25 packets captured 26 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.2 -v root@ubuntu:~# tcpdump -n -i eth0.3 icmp & [1] 5324 root@ubuntu:~# ping -c5 -q -I eth0.3 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.147 eth0.3: 56(84) bytes of data. tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0.3, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:56.373434 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 1, length 64 13:18:57.372116 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 2, length 64 13:18:57.381263 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 2, length 64 13:18:58.371141 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 3, length 64 13:18:58.373275 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 3, length 64 13:18:59.371165 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 4, length 64 13:18:59.373259 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 4, length 64 13:19:00.371211 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 5, length 64 13:19:00.373278 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 5, length 64 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 1 received, 80% packet loss, time 4001ms rtt min/avg/max/mdev = 13.666/13.666/13.666/0.000 ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 9 packets captured 10 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.3 icmp root@ubuntu:~# arp -n Address HWtype HWaddress Flags Mask Iface 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.1 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.2 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.3

  Read the article

• New host, high load?

  - by dotancohen

  A few minutes ago I signed up at a new webhost. I have yet to move my sites over. Upon initial SSH connection, I checked the load and memory usage, they do seem rather higher than I would like: # uptime 12:06:51 up 71 days, 23:23, 1 user, load average: 9.02, 9.49, 9.45 # free total used free shared buffers cached Mem: 33014800 31927192 1087608 0 2384812 17729816 -/+ buffers/cache: 11812564 21202236 Swap: 16787916 8584 16779332 Is that a bit to packed? I'm only paying about $5 USD per month, so I don't expect <0.1 loads, but ~10 is worrisome. Is it not? Also, there is no /etc/issue file so I tried other methods to guess the OS: # uname -a Linux box358.bluehost.com 2.6.32-20120131.55.1.bh6.x86_64 #1 SMP Tue Jan 31 15:43:27 EST 2012 x86_64 x86_64 x86_64 GNU/Linux # which yum /usr/bin/yum # which apt-get # That looks like CentOS / RHEL 6.2 possibly?

  Read the article

• How to setup VIM for php development?

  - by Ashwin kumar

  I have been trying a lot (but not smartly) to figure out setting up VIM, ctags, omnicomple for PHP development. On Googling I found this file. But have no clue how to use it. What have I done until now? Here it is: I am on Fedora 17 64-bit OS Logged in as root Found my VIM version to be VIM - Vi IMproved 7.3 (2010 Aug 15, compiled May 8 2012 15:05:51) Followed the install details as here http://www.vim.org/scripts/script.php?script_id=3171 install details Place in $HOME/.vim/autoload/phpcomplete.vim and enable the php ftplugin What else I am missing? How do I start using omnicomplete. (this is the first time I am using omnicomplete) Why didn't I try IDE's? I have a single core machine running LAMP stack. Didn't wanted to slow down everything and hence sticking to command line environment.

  Read the article

• Why is this LTO4 Tape-drive not working

  - by Tim Haegele

  # modprobe mptsas # dmesg [ 4274.796796] scsi target7:0:0: mptsas: ioc1: delete device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x50050763124b29ac [ 4274.939579] mptsas 0000:01:00.0: PCI INT A disabled [ 4280.934531] Fusion MPT SAS Host driver 3.04.12 [ 4280.934552] mptsas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4280.934692] mptbase: ioc2: Initiating bringup [ 4281.490183] ioc2: LSISAS1064E B3: Capabilities={Initiator} [ 4281.490203] mptsas 0000:01:00.0: setting latency timer to 64 [ 4293.555274] scsi8 : ioc2: LSISAS1064E B3, FwRev=011e0000h, Ports=1, MaxQ=277, IRQ=16 [ 4293.574906] mptsas: ioc2: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x50050763124b29ac [ 4293.576471] scsi 8:0:0:0: Sequential-Access IBM ULTRIUM-HH4 B6W1 PQ: 0 ANSI: 6 [ 4293.578549] st 8:0:0:0: Attached scsi tape st0 [ 4293.578550] st 8:0:0:0: st0: try direct i/o: yes (alignment 512 B) [ 4293.578577] st 8:0:0:0: Attached scsi generic sg5 type 1 # mt -f /dev/st0 status mt -f /dev/st0 status mt: /dev/st0: rmtopen failed: Input/output error # dd if=/dev/zero of=/dev/nst0 bs=1024 count=10 dd: opening `/dev/nst0': Input/output error I am running debian squeeze 2.6.32-5-amd64 #1 SMP Sun May 6 04:00:17 UTC 2012 x86_64 GNU/Linux Server is Fujitsu TX140 with Controller Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS Tape+Hardware is new.

  Read the article

• LFD always stops working after ~30 days, until I give /etc/csf/csf.pl -r

  - by gus

  When I give /etc/csf/csf.pl -r , I see lots of lines flushing, then I begin to get the notification emails again, (several emails per day), for example: Time: Wed Sep 12 08:39:47 2012 +0800 IP: 221.13.104.162 (CN/China/-) Failures: 5 (sshd) Interval: 300 seconds Blocked: Permanent Block Log entries: Sep 12 08:39:25 MyHost sshd[9677]: Failed password for root from 221.13.104.162 port 51106 ssh2 Sep 12 08:39:28 MyHost sshd[9712]: Failed password for root from 221.13.104.162 port 51690 ssh2 Sep 12 08:39:32 MyHost sshd[9739]: Failed password for root from 221.13.104.162 port 52128 ssh2 Sep 12 08:39:36 MyHost sshd[9778]: Failed password for root from 221.13.104.162 port 52670 ssh2 Sep 12 08:39:40 MyHost sshd[9821]: Failed password for root from 221.13.104.162 port 53155 ssh2 And then after about 30 days, the emails stop coming, it is as if something has filled up, and requires flushing again. I don't know much about CSF/LFD, but I would have imagined that this would work in a FIFO manner, so it should be able to run indefinitely within finite space. My /etc/csf/version.txt says 4.83 My cat /proc/version says Linux version 2.6.18-028stab066.8 (root@rhel5-64-build) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Fri Nov 27 20:19:25 MSK 2009

  Read the article

• Settings on php.ini ignored

  - by bfavaretto

  I can't get my server to obey the settings from php.ini (I'm trying to change memory_limit and upload_max_filesize). As far as I can tell, I'm editing the correct file. phpinfo() gives: Loaded Configuration File /etc/php.ini The file permission is 644. There are also some extra .ini files on /etc/php.d, but none include any of the keys I'm trying to change. No matter what I do, phpinfo reports the default values on both "Local" and "Master" columns. I also scanned my Apache config files, but found nothing related to PHP (besides loading the PHP module). The only way I was able to change those settings was by adding some php_value lines to my .htaccess. Is there something obvious I'm missing? This is a virtual server, and I can perform root commands with sudo. I'm running Apache 2.1.3 and PHP 5.3.3. System info (from uname -a) is: Linux sesctbapp01 2.6.18-308.1.1.el5 #1 SMP Wed Mar 7 04:16:51 EST 2012 x86_64

  Read the article

< Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >