Search Results

Search found 7992 results on 320 pages for 'hp power protector'.

Page 223/320 | < Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >

• Blackberry Access to Powered Down Exchange

  - by Sam Cogan

  I work with a company (it's more of a charity really) who have a single Exchange Server, with a few Blackberry users, who download emails via POP3 or IMAP. They are in a developing country and so every night they turn off the Exchange server to save power. However, they now want the Blackberry users to be able to get mail at night. They have a Linux server (a rented VPS), so they are considering having the mail delivered here and then pulling this mail via a POP connector into Exchange. Therefore at night, the BES users (who will now be pulling their POP email from the Linux server) can still get their mail. Can anyone think of a better solution to this problem that I may have missed? Unfortunately there is no convincing the company to leave the machine on overnight.

  Read the article

• No display but video card fans spins

  - by Marc

  Since I moved my computer there's no display when I plug my screen in the video card but works fine in the mother board. I tried reseting the cmos, but I still have the same problem. The fans are spining and there's a light from the card. I tried the DVI ports and the HDMI Here's my build. I have it for 2 months and everything was working fine. Do you think it's the video card? Asus p8z68-v pro gen3 Intel i7 2600k 120 GB OCZ Agility 3 16 GB RAM Blue Corsair DDR3 Asus GTX 570 H80 Corsair liquid cooling XFX PRO750W 80Plus bronze power supply EDIT That's why And I can't push more cause the card is on this Thank you everyone! I fixed it by pushing the mobo from the other side of the case and now it fits.

  Read the article

• Auto-connect Bluetooth headphones in Windows 7 64bit

  - by CptSkippy

  I have a pair of bluetooth headphones that I've successfully paired with my Windows 7 64bit machine and audio plays through them without a hitch. On the Device Stage under the properties of the headphones in troubleshooting it shows "last connected" as "currently connected" even if I power cycle the headphones or after a reboot of my computer. So the Windows bluetooth stack has no trouble finding them. The problem I have is that whenever the headphones reconnect to my pc they show up as disconnected in the Sound Settings and no sound is routed to them until I manually connect them. I have to go into Sound Settings, then from the Playback tab right click on the headphones and choose the Connect option. Is there a way to make the Sound Settings connect automatically whenever the headphones are available to Windows?

  Read the article

• How to increase Remote Desktop resolution?

  - by BugAlert

  I'm using Windows 7 on a PC and connect to it via Remote Desktop Connection for Mac by MS, using a Mac. On the Mac, I have a 27" Display with 2560 x 1440 px resolution. The PC has a high performance graphics card (one of those that needs an additional power supply). Both machines are connected via network cable to a router. So network should be insanely fast. However, the max resolution I can get is 1400 x 1050. The PC just has a old and bad 21" monitor connected to it. How can I increase the resolution to 2560 x 1440 to work fullscreen with the Apple LED Cinema Display via Remote Desktop? Maybe I shouldn't even ask, because I already experience some lag at the low resolution of 1400 x 1050. But I guess this can be resolved as well?

  Read the article

• How Does Facebook Know What Image To Parse Out of An Article?

  - by Travis

  First off I want to say that I wasn't really sure where to post this but it is very much programming related. If it is in the wrong spot I apologize and please let me know where I should post it instead. When sharing an article on a friends wall, facebook will grab a thumbnail of the article. How do they always get the right thumbnail from articles? It doesn't grab the logo img element of of http://www.nytimes.com/2010/06/07/world/asia/07convoys.html?hp for example but rather grabs the correct image element that corresponds with the article. I'm looking to do something similar and was wondering of a good way to parse the html to find the image given this example. Thanks.

  Read the article

• Streaming audio to headless linux box

  - by Ralph

  I have a dual boot (Win 7 + Ubuntu) PC connected via wifi with my music collection on a local HDD. I usually use Rhythmbox on Ubuntu or Winamp on Windows to listen to my music but I'll change if I have to. I also have a Raspberry Pi (low power PC running Debian) in the living room that is usually headless and connected via ethernet. The Raspberry Pi is also connected to my living room speakers via an amp. I would like to be able to stream music from my PC over the network to the linux raspberry pi. What software can I use to do this? Some sort of audio client\server?

  Read the article

• How can I disrupt my roommate's BitTorrent?

  - by bob

  We're on a 50 mb/s Comcast connection and our connection right now is coming in under 1.5 mb/s. Our roommate left for a week with BitTorrent running (Azureus client, we think). Our latency is approaching 300 ms. His door is locked up tight, and both his machine and the router for the house are located inside. I've even flipped the power breaker in the house and that barely works for 2 minutes. His laptop keeps on running, and once the cable modem and router come back up and the machine reconnects, the torrents resume in earnest. I've been running nmap and identified his IP on our LAN. Is there anything I can do over the LAN to make his torrents start to fail or slow down?

  Read the article

• Open source report framework

  - by Tiax

  I'm looking for a open source report framework for statistics. A more detailed explanation is: We have a number of tests running on different servers collecting data (for example, login time) every 5min. What we need is a framework that collects this data (or exposes web services for us to push the data into the framework) and presents it in form of graphs and so on. Does anyone know of a framework that's easy to use out of the box but has the power to grow? If you know what I mean. Thanks in advance!

  Read the article

• One bigger Virtual Machine distributed across many Nodes [on hold]

  - by flyer

  I just setup virtual machines on one hardware with Vagrant (this is just a test environment, not production!). I want to use a Puppet to configure them and next try to setup OpenStack. I am not sure If I am understanding how this should look at the end. Is it possible to have below architecture with OpenStack after all where I will run one Virtual Machine with Linux? ------------------------------- | VM | ------------------------------- | NOVA | NOVA | NOVA | ------------------------------- | OpenStack | ------------------------------- | Node | Node | Node | ------------------------------- (In my environment Nodes are just virtual machines, but my question concerns separate Hardware nodes) After some comments... Is it a language barrier, or? This is only my 'virtual environment'. If we imagine this virtual machines are a separate Nodes (e.g. every has 4 cores) the OpenStack is still the same, right? Can I run one Virtual Machine across many Nodes with OpenStack? Is it possible to aggregate the computation power of separate machines in one virtual distributed operating system?

  Read the article

• Using VLC to Unicast High Definition Webcam over local gigabit LAN with low/zero delay

  - by Robin Day

  We're setting up a webcam "window" between two offices in the same buildilng. The two PC's are connected to the same gigabit switch. We're using VLC to stream the webcam over HTTP using the following commands. vlc dshow:// :dshow-caching="0" :dshow-size="640x480" :sout=#transcode{vcodec=h264,vb=0,scale=0}:http{mux=ffmpeg{mux=flv},dst=:8080/} :no-sout-rtp-sap :no-sout-standard-sap :ttl=1 :sout-keep vlc http://192.168.0.1:8080 :http-caching="0" Even with the caching set to zero, the delay in the image is a good 2-3 seconds. The CPU usage of each pc is also maxed. I'm guessing it's the transcoding that's causing much of the delay. Can anyone give me some changes to these command lines that will reduce the transcoding power, or send the webcam over a different protocol, or anything that will reduce the delay of the cameras? Bandwidth is not an issue at all as the pc's can be connected to a dedicated switch/vlan if required.

  Read the article

• Why the different coarse threaded screws?

  - by Luke

  I'm seeing more and more of these screws (pictured below), which are almost triangular. I find I can only put them into Power Supplies and PCI(e) cards in cases, but they will break/strip away if I put them into a hard drive or a standoff for a motherboard Notice the triangular shape on it? On the Root Access chat, I started asking, but no concrete answer yet. I don't assume it's a production flaw, as I've seen hundreds and replaced them with the "proper" round screws. It is coarse-threaded, not fine-threaded (i.e. for a DVD drive or floppy drive). What are they for, and why do we need them instead of the regular round ones?

  Read the article

• Black screen after scheduled resume from sleep

  - by macbirdie

  I have a problem with my two Windows 7 setups at home. Whenever a scheduled task wakes up the machines from sleep, a black screen with a mouse cursor appears. If I move the mouse or press any key, desktop appears. The biggest problem is that during that black screen phase the display, sometimes even the PC too, doesn't go to stand by after a set period of time in power settings. If I get the desktop to show up, standby functions work fine. Display goes blank after a few minutes and as soon as the task doesn't need the PC, it goes back to sleep. It's frustrating that this "feature" is wasting energy and keeps lighting up the pc in the middle of the night for me to find it that way after I wake up. I found a handful of threads on the intertubes about the issue, but there were no answers in any of them. It sometimes happens in my XP machine at work as well.

  Read the article

• What service can hold CPU at lowest frequency possible when on battery load under Ubuntu?

  - by vava

  When I'm running on battery even with "performance" frequency scaling governor, something regularly lowers CPU speed to it's lowest value. I don't really want that, my AC strip usually in another room so I don't really need to save power. How can I find what service doing that? laptop_mode is disabled so that's not it. Update: Looks like CPU being scaled down only if it is under load. If it is more or less idle, it could stay on any frequency pretty much forever, but once it gets loaded, it quickly jumps to it's lowest frequency. Another update: Something sets maximum frequency CPU can have. Ubuntu launchpad bug 242006

  Read the article

• Samsung TV connected to PC for Powerpoint

  - by Skaughty

  I have a 42" Samsung LCD TV connected to a Dell computer with a PCI Radion 9000 via a 35' VGA cable. It's purpose is to run power point presentations over the TV for our retail store. I have tried every combination of button clicking on the video card options, and everything on the TV, and I still get black bars on the top and bottom of the image. It looks like I am watching a old wide screen movie on a full screen TV. The TV's suggested resolution is 1024x768, and that is what the output is set to. I have tried this with a nVida PCI card as well with the same results.

  Read the article

• Suggestion of device WiFi range in it's spec. Possible?

  - by SeeR

  I have router Draytek Vigor 2100VG at home almost in the center of it. The farthest point at my home is my balcony, ~12m from it. I have constant wifi signal range problems with some of my devices, but not with others. Notebook Lenovo W510 - no problems Nokia Home Music - always on 10m - no problems Sony PS3 - always on 7m - no problems Sony tablet S - problems around 6m Sony PSP - problems around 8m Sony PS Vita - problems around 8m Nokia E63 - problems around 8m I'm curious why my Notebook don't have any problems even on the balcony? I guess it has better hardware or uses more power for transmission. This information is really important when you want to buy new device/computer, so my real question is: Can device wifi range can somehow be found/suggested from official hardware technical specification? If not Is there some web page with wifi range reviews?

  Read the article

• How do you explain ethernet cable problems to non networking people?

  - by Bryan McLemore

  We've recently been doing a large network migration in our datacenter. We've had a few cables in this start to deliver really bad pings (in excess of 500ms on a LAN) before they could be replaced. The cables we were replacing weren't made the best. They where all hand made and the runs were so short on some of them that the bend radius was definitely too tight. Some of them ran in bundles right in front of the heat exhaust of the power supplies. The cables were running ok until we started pulling the ones surrounding them out. Then a few started having the problem I mentioned above degrading performance and causing reliability issues. I'm trying to figure out the best way to explain this to non networking people. Is there any documentation that people could recommend or other methods?

  Read the article

• How to charge an iPhone on a Windows PC without Installing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• How can I access my mini-pc (RaspberryPi / MK802 / Mele A1000 / VIA APC) via ethernet/wifi without having Monitor?

  - by sky770

  Soon I will be getting my own mini-PC (RaspberryPi / MK802 / Mele A1000 / VIA APC). But I was wondering whether is there any possibility that I can just power up and access my mini-pc's OS by connecting it to wifi/ethernet link and remotely access it over the LAN without actually needing a monitor (throughout the process?) ? I currently own a laptop and need a download box and later will be getting a HDTV for converting to a HTPC :D So, I don't really own a spare monitor now but I do have an extra keyboard and mouse. Is there exists any linux distro for the same? which I can use to directly fireup my mini-pc and hook it up across my LAN to remotely access through my laptop? Any suggestions appreciated :) Regards, sky770

  Read the article

• what's POST code 18 / can I run an ASRock P55 Pro + Core i3 530?

  - by Michael Borgwardt

  When I switch my newly built PC on, the fans start up, but I get nothing on the monitor, and the POST display on the motherboard runs quickly through various codes and then stops at code 18, which does not appear in the manual (the list there seems identical to this one). This lasts about 10 seconds, after which the machine shuts down. After a pause (also about 10 seconds) it starts up again, and this repeats until I cut the power. Interestingly, when I push the reset button, it stops at POST code 16 (which is also not listed in the manual). Does anyone have information about the meaning of those codes? Motherboard: ASRock P55 Pro CPU: Intel Core i3 530 Graphics Card: Sapphire HHD 5750 Does anyone have experience with that Motherboard/CPU combination? It says on the packaging and in the manual that it's only compatible with Core i5 and i7 (no mention of i3), but on the maker's product page, the i3 is listed as compatible as well.

  Read the article

• Debian crashed, file system is read-only and cannot backup - How Do I find/mount a USB drive?

  - by Spiros

  We have a Debian server (vm's) here at work and the server crashed after a power failure. I can only boot the system in maintenance mode, and the whole file system is set to read only. I can run fsck though maintenance mode, however I would like to get a backup of some files before I do. Problem: I cannot access the net since there is no network connectivity in maintenance mode, and for some reason I try to add a USB flash drive to the computer but I can't find it through the console. Question: how to you find/mount a usb drive on Debian? I have tried several resources from the internet but nothing worked. Is there any other way I could get a backup of my files? I cannot start networking since the filesystem is set to read only. Any help would be appreciated.

  Read the article

• Why would anacron not be running?

  - by Rory

  I have a Ubuntu system that has anacron installed. However I'm pretty sure it's not running. It's not running the commands in /etc/cron.daily to rotate the syslog files (I'm using sysklog, which has its own rotating log method, not using logrotate). The last time the logs were rotated were in October 2009. /var/spool/anacron/cron.daily exists and the contents are 20091015. AFAIR we had a power outage then, and everything rebooted. How can I debug anacron? How can I see why it's not running? My first instinct is to look for /var/log/anacron, but that's not there. How can I fix it to make it run again?

  Read the article

• Forgot to unmount/eject external hard drive, lost moved files. Mac OS X

  - by balupton

  So I was using my Mac with my external hard drive connected via USB. I moved about 10 GB of data to it (via drag and drop while holding down the Command key to move the files rather than to copy them). They moved to the drive all right, but as I was having some issues and the Finder crashed after the transfer, I was unable to eject the volume and later everything froze so I had to do a hard restart (hold the power button). When I remounted the volume (plugged the external hard drive back in) it no longer had any of the files which I moved onto it. As it was a lot of data, how can I recover these files?

  Read the article

• Can I fine-tune my screen brightness? (Ubuntu Studio, Thinkpad T420s)

  - by Dan S

  I am in a similar situation as question Can I fine-tune my screen brightness? . For me, Thinkpad T420s and Ubuntu Studio 11.10. The brightness keys work fine but the increments are too large. I have the /sys/class/backlight/acpi_video0 and I can see the value of actual_brightness changing as I use the brightness keys - it changes between values 0,3,6,9,12,15. None of the listed answers for fine control works here, as follows: As the root user I can echo integers to brightness in the above folder. As an ordinary user I cannot. I do not have /usr/sbin/gnome-power-backlight-helper (because I'm using xfce perhaps?), and not sure what package it's from or if installing such a package would make sense since it's not what's currently managing the backlight. How can it be done, please?

  Read the article

• Sony Vaio laptop constant "bi" noise when on battery

  - by Dominick1978

  I have sony vaio vgn fs215s laptop. When I use it with battery alone it makes a constant "bi" noise that gets louder on more power consuming tasks. Sometimes on startup the screen goes black before xp logo. Then i hear the windows startup sound but sill black screen. I bypassed the xp logo (via msconfig) and it gets me all the way ok but the noise is still there. There is no problem when the laptop is plugged to a socket. What do you think is the problem and how do i fix it (how much money)? Thanks a lot.

  Read the article

• Screenflick Audio option in MacBook Pro

  - by John

  When after I shut down my MacBook Pro by holding the power button for a few sec, (which I found is bad for the computer, so I will not do anymore) I found that my speaker doesn't play until I plug in and out earphone into the machine. When my speaker is not working like this, and when I am on a random webcam chatting site like chatroulette.com, they can hear the music playing on my iTunes when I choose Screenflick Audio option in the Mic setting. But when the Speaker is working back again, they don't hear the music playing even when I do Screenflick Audio mode. How can I make it work? Also, how do you make the chatting partner hear my music playing on my computer while I talk to them (not via my speaker, since it's bad quality).

  Read the article

< Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >