Search Results

Search found 28222 results on 1129 pages for 'machine config'.

Page 223/1129 | < Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >

• Booting a Windows 7 installation on different hardware

  - by tomfanning

  I'm in a situation where I could do with very quickly migrating a Windows 7 (RTM x64) installation from one machine to another. What options are open to me in terms of getting W7 to boot after the drive is picked up and moved from one box to another? I thought it was supposed to be a little less sensitive to this kind of move than XP, but it doesn't work - it is stuck in a reboot loop and never reaches a GUI. Tried a few things so far, none of which have worked: Changed SATA mode in the BIOS of the target machine between ATA and AHCI run Windows 7 Startup Repair tried safe mode, no change (I will keep this list up to date as suggestions come in) UPDATE: I can confirm this reboot loop is due to STOP error 0x0000007B, and these codes follow: 0xFFFFF880009A98E8 0xFFFFFFFFC0000034 0x0000000000000000 0x0000000000000000 UPDATE: I didn't get anywhere on this and I ended up just rebuilding the machine. I think it should be theoretically possible, so I'm going to leave the question open in case someone comes along in future with an answer.

  Read the article

• How can i get my KVM switch to work? (win7 & ubuntu 10.10)

  - by Will W.

  i bought a KVM switch and i'm trying to use it to have it connected to my main PC (win7) and my new machine i just installed ubuntu on. I hooked it up properly, and tried using it. It worked when switching from the win7 machine to the ubuntu one, but after the (1st and only) successful switch, ubuntu just didn't seem to recognize my mouse or keyboard. Basically when i tried it the easiest was to explain what happened was it only worked with Win7. When i switched over to ubuntu by doing a [scroll-lock] [scroll-lock], my keyboard and mouse were not recognized. However, the lights on the keyboard and mouse did work when on ubuntu, but they didn't function, and since keyboard wouldn't function, i couldn't do a [scroll-lock] [scroll-lock] to switch back to the win7 machine. So i was basically locked in to ubuntu with no mouse or keyboard, and i had to unplug the keyboard/mouse usb's and d-sub to plug the monitor d-sub back into win7 computer to type up this thread and google the issue. Seems some people have had this issue before but i couldn't find a fix... I am 80% sure it has to do with drivers... but there isn't any for KVM switches, at least not this one also i never was unable to find ubuntu drivers/firmware for my mouse and keyboard (Logitech G15 and Razer Deathadder 3500). I don't know how to fix this, perhaps someone super-savvy could write/code a script or work-around or something? I really need to get this thing working, my back is getting sore from bending over and plugging in / unplugging usb/monitor/usb/monitor/usb/usb over and over again lol... and i really would be sad if the constant plugging unplugging of the usb's or the d-sub port would over time damage the ports... i don't want that... There has to be some way to get this working.. Can anyone help? The KVM is a IOGEAR GCS632U Win7 x64 Ubuntu 10.10

  Read the article

• Bitdefender rescue disk does not show my C drive

  - by Nilesh

  My machine (winXP) is infected with virus and I am unable to start my machine. Therefore I have used BitDefender rescue disk to remove the viruses. But I am not able to see my C drive. All other drivers are able to see and scan. Even after I removed all viruses, my machine is not starting. Giving the same error message. I think due to viruse it is not visible to bitdefender. Please help me out. Appreciate your help.

  Read the article

• 14.04 LTS Unity no longer boots after last 94 MB update

  - by Harryg123

  I am running 14.04 LTS, Unity, on an HP Pavillion 15, 4GBRAM, 750 GB hdd, I-5 machine, with AMD 8600M graphics card built in. I have disabled the dash and all Ubuntu spyware. I have been faithfully loading all updates as they appear. This morning it asked for a 94 MB update (bringing kernel to .27, I think. Now, I can boot, get to login screen, but it freezes after that. Keyboard doesn't work at that point, but mouse does. I booted into recovery mode, tried to run in generic graphics mode, -- system again froze. I also pressed [esc] during boot, but saw nothing strange; then text disappeared and was replaced by login screen. I am not a hobbyist; this is a production machine and I have a lot of work to do today. Having a standard software update render my machine completely useless... sigh. Perhaps the simplest thing to do would be to revert to the previous configuration. How do I do that? I can boot into recovery mode. But I have no idea how to proceed. TIA for all help. -Harry

  Read the article

• Strange behavior of excel 2007 on WinXP

  - by bdecaf

  I'm on a machine that had quite some bloat ware and no update in ages. I made all the updates, removed the bloatware and cleaned using ccleaner. So far so good. Now excel shows some really strange behavior when I open .xls files through windows. The current behavior is: it opens a new excel process window which will then stay empty. One has then to drag the xls file into the window to open it. I would like to restore the default behavior. So far I have tried: running the Microsoft Office Diagnosis copied excel related registry keys from a machine with working excel and imported them had a look into the registry entry for .xls files myself - which seems correct. It was of no use and I'm out of ideas. I would try to avoid a reinstall as we have a very bureaucratic IT department and the machine then would be gone for some undetermined time period. So any idea what to do would be great.

  Read the article

• Price Drop for Processor based License on Exalytics

  - by Mike.Hallett(at)Oracle-BI&EPM

  ·       33% reduction in the list `per processor` license pricing for the Oracle BI Foundation Suite ·       New capacity-based licensing which allows customers to think big & start small, significantly lowering the entry price point for an Exalytics. Oracle BI Software List Price changes In response to new powerful platforms like the in-memory Oracle Exalytics with 40 cpu cores (counted under Oracle pricing policy as 20 “processors”), the list price of “Oracle BI Foundation Suite” (BIFS) is reduced by 33% from $450K per processor to $300K per processor. Capacity-based licensing on Exalytics (Trusted Partitions) “Capacity-based pricing” for the BIFS, Endeca, Essbase and Times Ten for Exalytics software is now available for Exalytics systems. This is delivered using “Oracle VM” (OVM).  We still ship a full Exalytics machine to all customers, but they may choose to only use and license a subset of the processors installed in the machine.   Customers can license Exalytics software in units of 5 “processors”: 5, 10, 15 or the full capacity 20.   As the customer’s implementation and workload increases, it is a simple matter to license additional processors and, using OVM, make them available to the BI or EPM application. Endeca Information Discovery now available on Exalytics Oracle has also announced the certification of “Oracle Endeca Information Discovery” (EID) on the Exalytics machine.    EID can be licensed alone or in combination with the BIFS & Times Ten for an Exalytics stack, and also participates in the capacity based pricing outlined above.   The Exalytics hardware is the perfect platform for EID, and provides superb power and performance for this in-memory hybrid text-search-analytics.   For more information : Oracle Price lists Oracle Partitioning Policy Discussion by Mark Rittman (Rittman Mead Consulting ltd.) on Oracle Trusted Partitions for Oracle Engineered Systems, Oracle Exalytics and Updated BI Foundation Pricing.

  Read the article

• Is it possible to tunnel ICMP over TCP?

  - by Robert Atkins

  I don't want to tunnel TCP over ICMP (as ptunnel does), I want to go the other way around. I'm in the situation where I have TCP (HTTP) connectivity to a machine but an internal firewall over which I have no control is swallowing pings. The monitoring software I'm using appears to determine connectivity by attempting to send a ping before it tries to just connect to the web service on the target machine. It's failing this ping test and giving up. I believe if I could fool my monitoring software into thinking pings were getting through, it would then connect to the web service and be on its merry way. Anyone know how I can do this? I have SSH and root access on the destination machine.

  Read the article

• OData &ndash; The easiest service I can create

  - by Jon Dalberg

  I wanted to create an OData service with the least amount of code so I fired up Visual Studio and got cracking. I decided to serve up a list of naughty words and make them read-only. Create a new web project. I created an empty MVC 2 application but MVC is not required for OData. Add a new WCF Data Service to the project. I named mine NastyWords.svc since I’m serving up a list of nasty words. Add a class to expose via the service: NastyWord 1: [DataServiceKey("Word")] 2: public class NastyWord 3: { 4: public string Word { get; set; } 5: }   I need to be able to uniquely identify instances of NastyWords for the DataService so I used the DataServiceKey attribute with the “Word” property as the key. I could have added an “ID” property which would have uniquely identified them and would then not need the “DataServiceKey” attribute because the DataService would apply some reflection and heuristics to guess at which property would be the unique identifier. However, the words themselves are unique so adding an “ID” property would be redundantly repetitive. Then I created a data source to expose my NastyWord objects to the service. This is just a simple class with IQueryable<T> properties exposing the entities for my service: 1: public class NastyWordsDataSource 2: { 3: private static IList<NastyWord> words = new List<NastyWord> 4: { 5: new NastyWord{ Word="crap"}, 6: new NastyWord{ Word="darn"}, 7: new NastyWord{ Word="hell"}, 8: new NastyWord{ Word="shucks"} 9: }; 10:   11: public NastyWordsDataSource() 12: { 13: NastyWords = words.AsQueryable(); 14: } 15:   16: public IQueryable<NastyWord> NastyWords { get; private set; } 17: }   Now I can go to the NastyWords.svc class and tell it which data source to use and which entities to expose: 1: public class NastyWords : DataService<NastyWordsDataSource> 2: { 3: // This method is called only once to initialize service-wide policies. 4: public static void InitializeService(DataServiceConfiguration config) 5: { 6: config.SetEntitySetAccessRule("*", EntitySetRights.AllRead); 7: config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; 8: } 9: }   Compile and browse to my NastWords.svc and weep with joy Now I can query my service just like any other OData service. Next time, I’ll modify this service to allow updates to sent so I can build up my list of nasty words. Enjoy!

  Read the article

• Boot ubuntu 12.04 in 3D - nomodeset quiet splash install

  - by rahi

  I would like to enable 3D in Ubuntu 12.04. I recently tried to install ubuntu on a new computer. When the installation was complete and I rebooted the machine, I could only see a blank screen. After some searching, I followed this tutorial which instructed me to boot with "nomodeset" enabled. I choose this on the USB I was installing ubuntu 12.04 from. Fortunately, the ubuntu installation on the new computer was successful. When I tried to change the size of the unity launcher icons, I did not see that option (as I see on my other computer running ubuntu 12.04). I tried installing MyUnity and it told me that the computer I had just installed 12.04 to was running in 2D. To my knowledge. all the software is up to date (as I ran the Software Updater). In addition, when I look for Additional Drivers, I see a message that says "No proprietary drivers are in use on this system". When I look under System Details Graphics, I see the Driver as "VESA:Intel Sandybridge/Ivybridge Graphics. When I hold the shift key on when my machine boots up, and type "e" on the Grub menu, I see the following towards the end, "nomodeset quiet splash $vt_handoff". Does this have anything to do with the plain 2D ubuntu 12.04 experience? Again, what I'd like to do now is get the 3D experience on my new machine running 12.04. Please let me know if you need more information.

  Read the article

• how to create a mirror of minimum size to install Ubuntu

  - by Registered User

  I need to create an http url at my laptop to have a Ubuntu installation begin within my laptop on a Xen environment. This is how the final thing will look like http://bderzhavets.wordpress.com/2008/10/28/install-ubuntu-intrepid-server-pv-domu-at-xen-33-port-via-httpgetco-centos-52-dom0/ the host and client are both going to be my laptop, I Google d and came across apt-mirror and some other packages. I do not want to archive entire 15 GB Ubuntu repositories on my machine. It is not possible to use a CD,ISO,loop mounted disk (reason mentioned below). I have tried using netboot image on local machine which failed because if you are attempting to create a virtual machine on a hardware which does not support VT virt-manager installer necessarily needs a URL of this sort http://archive.ubuntu.com/ubuntu/dists/hardy/main/installer-i386/current/images/netboot/ any other option to create guest OS is simply grayed out. The unfortunate part is my Ethernet connections do not work when I boot with Xen-4.0 and a pv-ops Dom0 kernel from Jeremy's tree.Which is where I have to do this work.So I have to create a URL structure which is similar to Ubuntu mirrors.So how can I do this in bare minimum so that at least the console boots and once the console comes I can do some work.

  Read the article

• Configuring Samba to allow Use of CUPS printer

  - by Skizz

  Having trouble with samba printing. I have a CUPS printer installed on an Ubuntu 11.04 server and that works great. When I try to configure samba to allow an XP machine to use the printer, it fails when printing. I can install the printer drivers for XP from the server and the printer appears in the XP printer control panels. When I try to print a test page from the XP machine I get this error in the system event log: Jun 27 20:33:29 FatController smbd[3571]: [2012/06/27 20:33:29, 0] rpc_server/srv_netlog_nt.c:603(_netr_ServerAuthenticate3) Jun 27 20:33:29 FatController smbd[3571]: _netr_ServerAuthenticate3: netlogon_creds_server_check failed. Rejecting auth request from client JAMES machine account JAMES$ Here's my smb.conf file: [global] server string = %h (Server) workgroup = SODOR encrypt passwords = true security = user os level = 255 preferred master = yes domain master = yes local master = yes logon path = \\%L\profile\%U logon drive = S: logon home = \\%L\home\%U domain logons = yes map to guest = Never guest ok = no dns proxy = no time server = yes logon script = logon.bat load printers = yes printing = cups printcap name = cups nt acl support = no interfaces = eth1 lo bind interfaces only = yes smb ports = 445 [netlogon] comment = Net Log On path = /home/samba/netlogon guest ok = no read only = yes browseable = no [profile] comment = User Profiles path = /home/samba/profiles read only = no create mask = 0600 directory mask = 0700 browseable = no store dos attributes = yes [printers] comment = All Printers path = /var/spool/samba browseable = yes guest ok = no printable = yes [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes guest ok = no read only = yes write list = root, skizz Anyone know what the problem is and how to fix it? In addition to the above, I also get this error: Jun 27 21:56:35 FatController smbd[3571]: [2012/06/27 21:56:35, 0] printing/print_cups.c:1027(cups_job_submit) Jun 27 21:56:35 FatController smbd[3571]: Unable to print file to `Edward' - client-error-not-authorized which I think is more relevant.

  Read the article

• How to synchronize two folders on two remote Linux virtual machines

  - by Manoj Agarwal

  I have two virtual machines, Host OS is ESXi 3.5 and guest OS is Centos 4.6. There are two ESXi servers remotely located, each containing a Centos 4.6 virtual machine. I wish, whatever change I make in any file/folder in one virtual machine should be automatically synchronized on other remote virtual machine. The synchronization process should be automatic. It should only sync differentials, not simulate entire copy with overwrite operation. Sync should be intelligent enough to look for what has changed and what not, and should only update the changed files/folders. Further, there should be some sort of overview and selection for syncing, for example, if it shows 4 files have changed, It should be possible to sync only two files and leave other two for the time being. So, some intelligent syncing mechanism for Linux is needed.

  Read the article

• File property information (last write time and file size) in explorer out of date by hours over netw

  - by David L Morris

  An application is running on a windows XP prof machine picking up file from a network share from another windows machine. It detects that the file has been updated (by date and time or optionally file size) and reads it for any new data. Most of the time the last write time and file size, seems to be up to date. Occasionally, this information stops being updated, even though the file is growing (intermittently during the day) with appended content, so that the last write time and file size remain fixed at some arbitrary moment. This is visible in explorer, where it shows a fixed last write time on the reading machine. Just opening the file to edit it in notepad, immediately refreshes the file properties, and the other application picks up where it left of. The file location can't be changed, nor the location of the relevant applications. Any solutions to resolve this problem?

  Read the article

• Windows Virtual PC File Copy from host very slow

  - by Shiv Kumar

  I have a Windows 7 desktop on which I've installed Windows Virtual PC and an instance Windows 7. I also have virtual XP instance on the same host. The problem I am having is that copying files from the host to the virtual machine is dog slow. I'm talking 17KB/sec. The host machine has a gigbit NIC. While using the XP virtual instance to do the same I didn't notice a huge difference but on the Window 7 virtual instance the time is really slowing me down. Is there something I need to do (settings) to fix this? I've attached an image of the Resource monitor (of the virtual Windows 7 instance) that shows my network traffic going in bursts rather than relatively steady. The files are on a "public" folder on my host machine.

  Read the article

• Bad request - Invalid Hostname Error when using ARR IP address

  - by syloc

  I'm trying to setup a simple ARR system. I have 1 ARR machine load balancing between 2 APP servers. I can reach the app sites if i use the server name of the ARR machine. (http://arrserver/app) But i can't do it with its IP address. (http://10.7.10.25/app). It gives the "Bad Request - Invalid Hostname". In the ARR machine i configured the default site's bindings to "All Unassigned","80" (default values). Do i need to change the binding rule or need additional url rewrite rules? And also, in the ARR server http://127.0.0.1/app doesn't work. But http://localhost/app works fine. Thx in advance

  Read the article

• Windows Server 2003 Terminal Services error

  - by Adrian S

  Hi! I have a Win2K3 machine which I want to access via remote desktop. When I try remote desktop on another machine the session just ends as soon as it attempts connection. I never see the log-on sceeen or anything. It just returns to the remote desktop connection dialog. I have checked the service on the target machine and it's up and running, so how can I determine the error? Is there any way to re-install terminal services and see if it just fixed?

  Read the article

• Windows 7, Drivers, Cloning and Sysprep

  - by Frank Thornton

  I have Windows 7 working on one machine but when I move it off to the new machine it crashes. If this is a driver issue do I need to download the drivers and install them first? Or do I install Windows 7 on the new machine first then copy the drivers folder over to the other disk so it will boot up correctly? EDIT: I was trying this as well: http://www.todo-backup.com/support/tutorial/redeploy-system-to-dissimilar-hardware.htm EDIT: I tried sysprep but on bootup I see the Windows logo then the system crashes. I can stick the drive back in the old hardware and it runs fine.

  Read the article

• How to see whats taking up space on your hard drive

  - by sam

  Im thinking of switching to one of the macbook pro retinas with a 256gb ssd, im making the move from a 512gb hd, which at the moment is split into a 60bg windows partition (which i dont think im going to have on my new machine) and a 440gb main partition of the main partition ive got 140gb free. So all in if i disregard the 60gb windows part ive got about 200gb free so im using 300gb, which is still a bit to much, ive had this machine 4/5 yrs so its likely to be clogged with files that i no longer need, is there a tool that i can use to view my current hd and see whats taking up the most room, so i can begin to see where i can cut down ? just for a bit of background my current machine runs osx.

  Read the article

• iptables: built-in INPUT chain in nat table?

  - by ughmandaem

  I have a Gentoo Linux system running linux 2.6.38-rc8. I also have a machine running Ubuntu with linux 2.6.35-27. I also have a virtual machine running Debian Unstable with linux 2.6.37-2. On the Gentoo and Debian systems I have an INPUT chain built into my nat table in addition to PREROUTING, OUTPUT, and POSTROUTING. On Ubuntu, I only have PREROUTING, OUTPUT, and POSTROUTING. I am able to use this INPUT chain to use SNAT to modify the source of a packet that is destined to the local machine (imagine simulating an incoming spoofed IP to a local application or just to test a virtual host configuration). This is possible with 2 firewall rules on Gentoo and Debian but seemingly not so on Ubuntu. I looked around for documentation on changes to the SNAT target and the INPUT chain of the nat table and I couldn't find anything. Does anyone know if this is a configuration issue or is it something that was just added in more recent versions of linux?

  Read the article

• Nexenta under KVM?

  - by Nick

  I have an Ubuntu Server running KVM. I'd like to get the benefits of ZFS so I was thinking of installing a virtual machine under KVM running Nexenta (or NexentaStor), allowing that virtual machine to have raw access to a couple of physical hard disks, and then having it share its file system with NFS so that Ubuntu can access it. I've never tried setting up KVM so that the virtual machine has access to physical drives. Does this sound feasible, and is there anything I need to watch out for? Has someone already documented something like this? Does Nexenta/ZFS function basically as well in the virtual environment as if they were running base bones? I can take a small performance hit, but I don't want it to not be as reliable because of the virtualization. Thanks.

  Read the article

• How do I restore a Dell Inspiron 1521 laptop to factory defaults?

  - by Solignis

  I got a Dell Inspiron 1521 laptop from a local computer store that a buddy of mine works at. When I turned it on I had come to realize it has not been wiped and reverted to factory defaults. How can revert the machine to factory defaults? I do not have any of the CDs that came with the machine, all I have is the computer and the power brick. But if it helps any I can able to get into Windows so I full access to the machine.

  Read the article

• Boot to VHD backup plan

  - by Josh Barker

  I have a machine that I just reinstalled Windows and all of my applications onto... what a chore that is. I want to totally and completely avoid this from now on by creating an image. My first thought was to see if it possible to copy a VHD file when you are booted into it since I am using Windows 7 Ultimate as boot-to-vhd (without a parent machine). Is this possible and if so, how could I accomplish this? Keep in mind, this is my personal machine and I'm trying to keep things inexpensive (a good script would work). Thanks, Josh

  Read the article

• Steam, launching Team Fortress 2: libGL.so.1: wrong ELF class: ELFCLASS64

  - by stefanhgm

  After I got Steam running with the workaround mentioned here, I've got nearly the same problem when launching Team Fortress 2. After starting it from Steam the "Launcher" pops up and after a few seconds it disappears with the following error in the terminal: /home/user/Steam/SteamApps/steamuser/Team Fortress 2/hl2_linux: error while loading shared libraries: libGL.so.1: wrong ELF class: ELFCLASS64 Game removed: AppID 440 "Team Fortress 2", ProcID 5299 saving roaming config store to 'sharedconfig.vdf' roaming config store 2 saved successfully Because of the similarity with the workaround I used before, I tried to execute: export LD_LIBRARY_PATH=/usr/lib32:$LD_LIBRARY_PATH directly before launching the game, but there is no difference.

  Read the article

• How to prevent a 404 Error when installing a subdomain using a wordpress multi-site installation

  - by Chris

  I have installed a multi-site instillation of WordPress onto my domain. I then added the necessary code to the wp-config.php file and .htaccess as instructed by WordPress. I also installed a plugin called Quick Page/Post Redirect Plugin which allowed me to place a 301 redirect onto the main domain as I only want to use the sub domain and not the main domain. Then I also added the following line of code to the wp-config.php file to redirect the main domain define( 'NOBLOGREDIRECT', 'URL Redirect Address' ); The site works fine with a redirect on the main domain and my subdomain runs fine when you type in subdomain.domain.com or http://subdomain.domain.com. However when I enter www.subdomain.domain.com or http://www.subdomain.domain.com the following error message is returned: Not Found The requested URL / was not found on this server. Apache/2.4.9 (Unix) Server at www.subdomain.domain.com Port 80 Any help with this would be much appreciated.

  Read the article

• Gmail flagging emails as spam despite SPF being enabled and working perfectly

  - by Asif

  I have a website where people can recommend contents to their friends using their email. The issue is that emails are being flagged as spam whereas if I do the same from my development machine things are working out fine. I have enabled SPF and it is perfect. When sending through website, the email appears as this in Gmail Inbox: From [email protected] to [email protected]. When I send it from my development machine it appears as : From xyz.com via mywebsite.com to [email protected] mailed by mywebsite.com and this is exactly how I envisioned it. From what little I could figure out by looking at the source of emails in Gmail is that when sending from my development machine Gmail correctly recognizes my domain as mywebsite.com for which SPF is enabled and hence it treats it as genuine email. Whereas Gmail recognizes my domain as [email protected] when sent through the website. Can someone tell me why it does so? Any help would be really appreciated.

  Read the article

< Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >