Search Results

Search found 5929 results on 238 pages for 'node webkit'.

Page 223/238 | < Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >

  • How should I ask for help in getting my emails to stop bouncing?

    - by Gregg Williams
    For several months, people have been telling me that emails they sent to me have been bouncing back, marked as undeliverable. The bounce message would contain portions like this: Final-Recipient: rfc822;[email protected] Action: failed Status: 5.7.1 Diagnostic-Code: smtp;550 5.7.1 <[email protected]>... Recipient declines email from 69.64.159.2, <spamhaus-xbl>, Ref: http://www.spamhaus.org/query/bl?ip=69.64.159.2 Clicking the link on the last line, the destination page told me that "this IP address is infected with/emitting spamware/spamtrojan traffic and needs to be fixed." I could temporarily de-list this node by clicking a link on that page, but it would get back on the list and more emails to me to bounce. I own a domain, innerpaths.net, and I normally use [email protected] for my email. I have my domain registrar, namecheap.com, forward all email from innerpaths.net to the email account [email protected]. (BTW, I had this same problem at a former registrar. I changed registrars, hoping that would fix the problem. It didn't.) Trying to isolate the problem, I asked namecheap.com what I should do. Their answer, though substantial, left me scratching my head: We have received feedback from our upstream provider which informed us that the mail server that you are trying to email subscribes to a 3rd party blacklist service which they appear to be listed on at the present time and is causing destination mail server to reject the messages. Being blocked with one of these services can happen to anyone for many reasons and is something that is beyond our control. 3rd party blacklist services require companies whose mail servers they have blacklisted, pay fees in order to be removed from their lists. As we cannot pay fees to blacklist services which require them for removal, you should contact your email provider and have them whitelist our mail server IP address: 69.64.157.73. My best guess is that I should email my ISP, sonic.net, tell them what is going on and ask them to whitelist the IP address 69.64.157.73. (If not, please let me know.) But I want to know what is going on and how email works. I understand that there's a device at location 69.64.159.2 that is doing something bad that causes the "destination mail server [sonic.net's, I assume --gw] to reject the messages." I know that email is sent through multiple devices in a way that eventually gets it to its destination. Beyond that, here are my questions: 1) I thought the Internet "routed around damage." Why does email starting at namecheap.com always (or is it 'sometimes'?) go through 69.64.159.2? 2) Who is the "upstream provider" that the namecheap.com representative mentions, and what is their role? 3) How does having sonic.net's whitelisting namecheap.com's mail server prevent my email being bounced by 69.64.159.2? I've searched the Internet for answers but have found nothing useful. Thanks for whatever answers you can provide.

    Read the article

  • Tomcat dying silently on regular basis

    - by Hendrik
    My tomcat (6.0.32, Java Sun 1.6.0_22-b04 on Ubuntu 10.04) keeps crashing multiple times daily without any specific output in catalina.out. This usually happens on high load (see top output). Update: The pid-file is properly removed when this happens. Update 2: No CATALINA_OPTS set, _JAVA_OPTS are: export _JAVA_OPTIONS="-Xms128m -Xmx1024m -XX:MaxPermSize=512m \ -XX:MinHeapFreeRatio=20 \ -XX:MaxHeapFreeRatio=40 \ -XX:NewSize=10m \ -XX:MaxNewSize=10m \ -XX:SurvivorRatio=6 \ -XX:TargetSurvivorRatio=80 \ -XX:+CMSClassUnloadingEnabled \ -Djava.awt.headless=true \ -Dcom.sun.management.jmxremote \ -Dcom.sun.management.jmxremote.port=37331 \ -Dcom.sun.management.jmxremote.ssl=false \ -Dcom.sun.management.jmxremote.authenticate=true \ -Djava.rmi.server.hostname=(myhostname) \ -Dcom.sun.management.jmxremote.password.file=/etc/java-6-sun/management/jmxremote.password \ -Dcom.sun.management.jmxremote.access.file=/etc/java-6-sun/management/jmxremote.access" Top: top - 12:40:03 up 9 days, 12:15, 3 users, load average: 30.00, 22.39, 21.91 Tasks: 89 total, 4 running, 85 sleeping, 0 stopped, 0 zombie Cpu(s): 53.2%us, 9.7%sy, 0.0%ni, 34.7%id, 1.5%wa, 0.0%hi, 0.8%si, 0.0%st Mem: 4194304k total, 3311304k used, 883000k free, 0k buffers Swap: 4194304k total, 0k used, 4194304k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 25850 tomcat6 20 0 1981m 1.2g 11m S 161 29.6 11:41.56 java 12632 mysql 20 0 393m 97m 4452 S 141 2.4 1690:05 mysqld 14932 nobody 20 0 253m 44m 9152 R 56 1.1 3:26.57 php-cgi 7011 nobody 20 0 241m 31m 9124 S 30 0.8 1:35.96 php-cgi 10093 nobody 20 0 228m 18m 8520 S 25 0.5 2:29.97 php-cgi 27071 nobody 20 0 237m 28m 8640 S 11 0.7 3:13.72 php-cgi 3306 nobody 20 0 227m 16m 6736 R 7 0.4 2:29.83 php-cgi 7756 nobody 20 0 261m 58m 15m R 5 1.4 2:22.33 php-cgi 7129 www-data 20 0 3646m 7228 1896 S 2 0.2 0:36.65 nginx 2657 nobody 20 0 228m 18m 8540 S 1 0.5 1:59.51 php-cgi 7131 www-data 20 0 3645m 6464 1960 S 1 0.2 0:34.13 nginx 7140 www-data 20 0 3652m 12m 1896 S 1 0.3 0:35.80 nginx 619 nobody 20 0 231m 29m 15m S 0 0.7 2:33.46 php-cgi 16552 nobody 20 0 250m 41m 8784 S 0 1.0 2:48.12 php-cgi 17134 nobody 20 0 239m 37m 16m S 0 0.9 2:32.86 php-cgi 21004 nobody 20 0 243m 34m 8700 S 0 0.8 1:19.85 php-cgi 26105 root 20 0 19220 1392 1060 R 0 0.0 0:00.82 top 32430 nobody 20 0 256m 47m 9196 S 0 1.2 2:19.01 php-cgi 314 nobody 20 0 256m 47m 8804 S 0 1.1 1:46.00 php-cgi 2111 nobody 20 0 253m 44m 9196 S 0 1.1 3:01.14 php-cgi 2142 root 20 0 26452 2564 868 S 0 0.1 0:00.56 screen 2144 root 20 0 19484 2012 1368 S 0 0.0 0:00.00 bash 2333 nobody 20 0 249m 41m 9160 S 0 1.0 1:10.33 php-cgi 2552 root 20 0 19484 2260 1620 S 0 0.1 0:00.01 bash 2587 nobody 20 0 258m 49m 9192 S 0 1.2 2:04.50 php-cgi 2684 root 20 0 4092 652 540 S 0 0.0 0:00.00 xvfb-run 2696 root 20 0 60720 13m 2352 S 0 0.3 0:09.12 Xvfb 2759 root 20 0 617m 12m 4676 S 0 0.3 0:00.66 node 3514 nobody 20 0 270m 61m 9216 S 0 1.5 3:13.69 php-cgi 5270 root 20 0 25164 1324 1036 S 0 0.0 0:00.01 screen 5402 nobody 20 0 227m 16m 8032 S 0 0.4 1:33.61 php-cgi 5765 root 20 0 81180 3820 3028 S 0 0.1 0:00.31 sshd 5798 nobody 20 0 242m 32m 9124 S 0 0.8 1:52.08 php-cgi 5856 root 20 0 19496 2292 1636 S 0 0.1 0:00.03 bash 6442 root 20 0 62332 20m 1960 S 0 0.5 0:30.58 mrtg 7082 root 20 0 88992 1916 1636 S 0 0.0 0:00.00 PassengerWatchd I can't find any concrete reason for it, no Exceptions or messages of a shutdown in catalina.out (and no other logs in tomcat's log dir). I can start up the service and it will run for a few days or just minutes before dying again. Is there somewhere else i could look for output? Could the kernel start killing threads due to a lack of ressources and by that bring the VM down?

    Read the article

  • set proxy in apache for XMPP chat

    - by Hunt
    I want to setup a proxy settings in Apache to use Facebook XMPP Chat So far I have setup ejabber server and I am able to access xmpp service using http://mydomain.com:5280/xmpp-http-bind I am able to create Jabber Account too. Now as I want to integrate Facebook XMPP chat , I want my server to sit in between client and chat.facebook.com because I want to implement Facebook chat and custom chat too. So I have read this article and come to know that I need to serve BOSH Service as a proxy in apache to access Facebook Chat service. So I don't know how to set up a proxy in a apache httpd.conf as I have tried following <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /xmpp-httpbind http://www.mydomain.com:5280/xmpp-http-bind ProxyPassReverse /xmpp-httpbind http://www.mydomain.com:5280/xmpp-http-bind But whenever I request http://www.mydomain.com:5280/xmpp-http-bind from strophe.js I am getting following response from server <body type='terminate' condition='internal-server-error' xmlns='http://jabber.org/protocol/httpbind'> BOSH module not started </body> and server log says following E(<0.567.0:ejabberd_http_bind:1239) : You are trying to use BOSH (HTTP Bind) in host "chat.facebook.com", but the module mod_http_bind is not started in that host. Configure your BOSH client to connect to the correct host, or add your desired host to the configuration, or check your 'modules' section in your ejabberd configuration file. here is my existing settings of ejabberd.cfg , but still no luck {5280, ejabberd_http, [ {access,all}, {request_handlers, [ {["pub", "archive"], mod_http_fileserver}, {["xmpp-http-bind"], mod_http_bind} ]}, captcha, http_bind, http_poll, register, web_admin ]} ]}. in a module section {mod_http_bind, [{max_inactivity, 120}]}, and whenever i fire http://www.mydomain.com:5280/xmpp-http-bind url independently am getting following message ejabberd mod_http_bind An implementation of XMPP over BOSH (XEP-0206) This web page is only informative. To use HTTP-Bind you need a Jabber/XMPP client that supports it. I have added chat.facebook.com in a list of host in ejabber.cfg as follows {hosts, ["localhost","mydomain.com","chat.facebook.com"]} and now i am getting following response <body xmlns='http://jabber.org/protocol/httpbind' sid='710da2568460512eeb546545a65980c2704d9a27' wait='300' requests='2' inactivity='120' maxpause='120' polling='2' ver='1.8' from='chat.facebook.com' secure='true' authid='1917430584' xmlns:xmpp='urn:xmpp:xbosh' xmlns:stream='http://etherx.jabber.org/streams' xmpp:version='1.0'> <stream:features xmlns:stream='http://etherx.jabber.org/streams'> <mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'> <mechanism>DIGEST-MD5</mechanism> <mechanism>PLAIN</mechanism> </mechanisms> <c xmlns='http://jabber.org/protocol/caps' hash='sha-1' node='http://www.process-one.net/en/ejabberd/' ver='yy7di5kE0syuCXOQTXNBTclpNTo='/> <register xmlns='http://jabber.org/features/iq-register'/> </stream:features> </body> if i use valid BOSH service created my jack moffit http://bosh.metajack.im:5280/xmpp-httpbind then i am getting following valid XML from facebook , but from my server i am not getting this <body xmlns='http://jabber.org/protocol/httpbind' inactivity='60' secure='true' authid='B8732AA1' content='text/xml; charset=utf-8' window='3' polling='15' sid='928073b02da55d34eb3c3464b4a40a37' requests='2' wait='300'> <stream:features xmlns:stream='http://etherx.jabber.org/streams' xmlns='jabber:client'> <mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'> <mechanism>X-FACEBOOK-PLATFORM</mechanism> <mechanism>DIGEST-MD5</mechanism> </mechanisms> </stream:features> </body> Can anyone please help me to resolve the issue

    Read the article

  • Postfix on Snow Leopard unable to send MIME emails, including header contents in message body

    - by devvy
    I configured postfix on snow leopard by adding the following line to /etc/hostconfig: MAILSERVER=-YES- I then configured postfix to relay through my ISP's SMTP server. I added the following two lines in their respective places within /etc/postfix/main.cf: myhostname = 1and1.com relayhost = shawmail.vc.shawcable.net I then have a simple PHP mail function wrapper as follows: send_email("[email protected]", "[email protected]", "Test Email", "<p>This is a simple HTML email</p>"); echo "Done"; function send_email($from,$to,$subject,$message){ $header="From: <".$from."> "; $header.= 'MIME-Version: 1.0' . " "; $header.= 'Content-type: text/html; charset=iso-8859-1' . " "; $send_mail=mail($to,$subject,$message,$header); if(!$send_mail){ echo "ERROR"; } } With this, I am receiving an e-mail that appears to be improperly formatted. The message header is showing up in the body of the e-mail. The raw message content is as follows: Return-Path: <[email protected]> Delivery-Date: Tue, 27 Apr 2010 18:12:48 -0400 Received: from idcmail-mo2no.shaw.ca (idcmail-mo2no.shaw.ca [64.59.134.9]) by mx.perfora.net (node=mxus2) with ESMTP (Nemesis) id 0M4XlU-1NCtC81GVY-00z5UN for [email protected]; Tue, 27 Apr 2010 18:12:48 -0400 Message-Id: <[email protected]> Received: from pd6ml3no-ssvc.prod.shaw.ca ([10.0.153.149]) by pd6mo1no-svcs.prod.shaw.ca with ESMTP; 27 Apr 2010 16:12:47 -0600 X-Cloudmark-SP-Filtered: true X-Cloudmark-SP-Result: v=1.0 c=1 a=VphdPIyG4kEA:10 a=hATtCjKilyj9ZF5m5A62ag==:17 a=mC_jT1gcAAAA:8 a=QLyc3QejAAAA:8 a=DGW4GvdtALggLTu6w9AA:9 a=KbDtEDGyCi7QHcNhDYYwsF92SU8A:4 a=uch7kV7NfGgA:10 a=5ZEL1eDBWGAA:10 Received: from unknown (HELO 1and1.com) ([24.84.196.104]) by pd6ml3no-dmz.prod.shaw.ca with ESMTP; 27 Apr 2010 16:12:48 -0600 Received: by 1and1.com (Postfix, from userid 70) id BB08D14ECFC; Tue, 27 Apr 2010 15:12:47 -0700 (PDT) To: [email protected] Subject: Test Email X-PHP-Originating-Script: 501:test.php Date: Tue, 27 Apr 2010 18:12:48 -0400 X-UI-Junk: AutoMaybeJunk +30 (SPA); V01:LYI2BGRt:7TwGx5jxe8cylj5nOTae9JQXYqoWvG2w4ZSfwYCXmHCH/5vVNCE fRD7wNNM86txwLDTO522ZNxyNHhvJUK9d2buMQuAUCMoea2jJHaDdtRgkGxNSkO2 v6svm0LsZikLMqRErHtBCYEWIgxp2bl0W3oA3nIbtfp3li0kta27g/ZjoXcgz5Sw B8lEqWBqKWMSta1mCM+XD/RbWVsjr+LqTKg== Envelope-To: [email protected] From: <[email protected]> MIME-Version: 1.0 Content-type: text/html; charset=iso-8859-1 Message-Id: <[email protected]> Date: Tue, 27 Apr 2010 15:12:47 -0700 (PDT) <p>This is a simple HTML email</p> And here are the contents of my /var/log/mail.log file after sending the email: Apr 27 15:29:01 User-iMac postfix/qmgr[705]: 74B1514EDDF: removed Apr 27 15:29:30 User-iMac postfix/pickup[704]: 25FBC14EDF0: uid=70 from=<_www> Apr 27 15:29:30 User-iMac postfix/master[758]: fatal: open lock file pid/master.pid: unable to set exclusive lock: Resource temporarily unavailable Apr 27 15:29:30 User-iMac postfix/cleanup[745]: 25FBC14EDF0: message-id=<[email protected]> Apr 27 15:29:30 User-iMac postfix/qmgr[705]: 25FBC14EDF0: from=<[email protected]>, size=423, nrcpt=1 (queue active) Apr 27 15:29:30 User-iMac postfix/smtp[747]: 25FBC14EDF0: to=<[email protected]>, relay=shawmail.vc.shawcable.net[64.59.128.135]:25, delay=0.21, delays=0.01/0/0.1/0.1, dsn=2.0.0, status=sent (250 ok: Message 25784419 accepted) Apr 27 15:29:30 User-iMac postfix/qmgr[705]: 25FBC14EDF0: removed Two other people in the office have followed the exact same process and are running the exact same script, version of snow leopard, php, etc. and everything is working fine for them. I've even copied their config files to my machine, restarted postfix, restarted apache, all to no avail. Does anyone know what steps I could take to resolve the issue? This is boggling my mind... Thanks

    Read the article

  • how does openvpn decide which interface to get IP addrs from

    - by bkrupa
    Using ubuntu 10.04 on both ends. We have a client and server machine on the SAME network attempting to make a vpn connection. We use the config files from here and made minimal changes. The server and client start and seem to connect without any trouble. The server looks like: Wed Feb 23 22:13:22 2011 MULTI: multi_create_instance called Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Re-using SSL/TLS context Wed Feb 23 22:13:22 2011 192.168.1.55:47166 LZO compression initialized Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel MTU parms [ L:1574 D:138 EF:38 EB:0 ET:0 EL:0 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Local Options hash (VER=V4): 'f7df56b8' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Expected Remote Options hash (VER=V4): 'd79ca330' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 TLS: Initial packet from 192.168.1.55:47166, sid=69112e42 5458135b *...* Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Feb 23 22:13:22 2011 192.168.1.55:47166 [client1] Peer Connection Initiated with 192.168.1.55:47166 On the client side the connection looks like: Wed Feb 23 22:20:07 2011 [server] Peer Connection Initiated with [AF_INET]192.168.1.41:1194 Wed Feb 23 22:20:10 2011 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Wed Feb 23 22:20:10 2011 PUSH: Received control message: 'PUSH_REPLY,route-gateway 10.8.0.4,ping 10,ping-restart 120,ifconfig 10.8.0.50 255.255.255.0' ... Wed Feb 23 22:20:10 2011 /sbin/ifconfig tap0 10.8.0.50 netmask 255.255.255.0 mtu 1500 broadcast 10.8.0.255 Wed Feb 23 22:20:10 2011 Initialization Sequence Completed The openvpn server has been configured to assign ip addresses in the range 10.8.0.* and the client has been given 10.8.0.50. When I run the following nmap from the client: Starting Nmap 5.00 ( http://nmap.org ) at 2011-02-23 22:04 EST Host 10.8.0.50 is up (0.00047s latency). Nmap done: 256 IP addresses (1 host up) scanned in 30.34 seconds Host 192.168.1.1 is up (0.0025s latency). Host 192.168.1.18 is up (0.074s latency). Host 192.168.1.41 is up (0.0024s latency). Host 192.168.1.55 is up (0.00018s latency). Nmap done: 256 IP addresses (4 hosts up) scanned in 6.33 seconds If I run an nmap from the server on 10.8.0.* I get nothing. If the client has two interfaces (wireless and tap device) when you look for a certain ip address, how does it decide which interface to connect on? edit I am trying to set up a vpn so that I can connect to my home network from a remote network. It seems like openvpn is connecting but none of the computers on my home network appear as network machines even after the connection is "Established". Stripped versions of the client and server config files are posted below. Thanks for any help you can offer. server.conf port 1194 proto udp dev tap ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key # This file should be kept secret dh /etc/openvpn/easy-rsa/keys/dh1024.pem ifconfig-pool-persist ipp.txt server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 client.conf client dev tap dev-node tap0901 proto udp remote ********** 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client1.crt key client1.key comp-lzo verb 3 one other thing that might be helpful, I tried to connect using the openvpn gui for windows and the connection stalls out on "obtaining configuration" and the bar just scrolls forever.

    Read the article

  • LDAP object class violation: attribute ou not allowed in suffix?

    - by Paramaeleon
    I am about to set up a LDAP directory. It is used as a tool to communicate user permissions from a web application to WebDav file system access, e.g. adding a user to the web platform shall allow login to the file system with the same credentials. There are no other usages intended. Following this German tutorial which encourages the use of the attributes c, o, ou etc. over dc, I configured the following suffix and root: suffix "ou=webtool,o=myOrg,c=de" rootdn "cn=ldapadmin,ou=webtool,o=myOrg,c=de" Server starts and I can connect to it by LDAP Admin, which reports “LDAP error: Object lacks”. Well, there aren’t any objects yet. I now want to create the root and admin elements from shell. I created an init.ldif file: dn: ou=webtool,o=myOrg,c=de objectclass: dcObject objectclass: organization dc: webtool o: webtool dn: cn=ldapadmin,ou=webtool,o=myOrg,c=de objectclass: organizationalRole cn: ldapadmin Trying to load the file runs into an error, telling me that ou is not allowed: server:~ # ldapadd -x -D "cn=ldapadmin,ou=webtool,o=myOrg,c=de" -W -f init.ldif Enter LDAP Password: adding new entry "ou=webtool,o=myOrg,c=de" ldap_add: Object class violation (65) additional info: attribute 'ou' not allowed I am not using ou anywhere except in the suffix, so the question: Isn’t it allowed here? What is allowed here? Here is my answer. I am not allowed to post it as answer for 8 hours, so don’t mind that it is part of the question by now. I will move it outside some day, if I don’t forget to do so. There are numberous dependencies for the creation of elements, and error messages are rather confusing if you don’t know of the concept. The objectclass isn’t necessarily dcObject for the databases’ root node, as it is likely to guess when you read several tutoriales. Instead, it must correspond to the object’s type: Here, for a name starting with ou=, it must be organizationalUnit. I found this piece of information in these tables [Link removed due to restriction: Oops! Your edit couldn't be submitted because: We're sorry, but as a spam prevention mechanism, new users can only post a maximum of two hyperlinks. Earn more than 10 reputation to post more hyperlinks. Link is below]. Further on, the object class dictates which properties must and can be added in the record. Here, organizationalUnit must have an ou: entry and must not have neither dc: nor o: entry. The healthy init.ldif file looks like that: dn: ou=webtool,o=myOrg,c=de objectclass: organizationalUnit ou: LDAP server for my webtool dn: cn=ldapadmin,ou=webtool,o=myOrg,c=de objectclass: organizationalRole cn: ldapadmin Note: The page also states: “While many objectClasses show no MUST attributes you must (ouch) follow any hierarchy […] to determine if this is the really case.” I thought that would mean my root record would have to provide the must fields for c= and o= (c: and o:, respectively) but this isn’t the case. Link in answer is (1): http :// www (dot) zytrax (dot) com/books/ldap/ape/ "Appendix E: LDAP - Object Classes and Attributes"

    Read the article

  • Rsyslog is not working properly, it does not log anything

    - by Victor Henriquez
    I'm running a Debian server and a couple of days ago my rsyslog started to behave very weird, the daemon is running but it doesn't seem to do anything. Many people use the system but I'm the only one with (legal) root access. I'm using the default rsyslogd configuration (if you think is relevant I'll attach it, but it's the one that comes with the package). After I rotated all the log files, they have remained empty: # ls -l /var/log/*.log -rw-r--r-- 1 root root 0 Jun 27 00:25 /var/log/alternatives.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/auth.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/daemon.log -rw-r--r-- 1 root root 0 Jun 27 00:25 /var/log/dpkg.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/kern.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/lpr.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/mail.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/user.log Any try to force a log writing does not have any effect: # logger hey # ls -l /var/log/messages -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/messages Lsof shows that rsyslogd does not have any log files opened: # lsof -p 1855 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME rsyslogd 1855 root cwd DIR 202,0 4096 2 / rsyslogd 1855 root rtd DIR 202,0 4096 2 / rsyslogd 1855 root txt REG 202,0 342076 21649 /usr/sbin/rsyslogd rsyslogd 1855 root mem REG 202,0 38556 32153 /lib/i386-linux-gnu/i686/cmov/libnss_nis-2.13.so rsyslogd 1855 root mem REG 202,0 79728 32165 /lib/i386-linux-gnu/i686/cmov/libnsl-2.13.so rsyslogd 1855 root mem REG 202,0 26456 32163 /lib/i386-linux-gnu/i686/cmov/libnss_compat-2.13.so rsyslogd 1855 root mem REG 202,0 297500 1061058 /usr/lib/rsyslog/imuxsock.so rsyslogd 1855 root mem REG 202,0 42628 32170 /lib/i386-linux-gnu/i686/cmov/libnss_files-2.13.so rsyslogd 1855 root mem REG 202,0 22784 1061106 /usr/lib/rsyslog/imklog.so rsyslogd 1855 root mem REG 202,0 1401000 32169 /lib/i386-linux-gnu/i686/cmov/libc-2.13.so rsyslogd 1855 root mem REG 202,0 30684 32175 /lib/i386-linux-gnu/i686/cmov/librt-2.13.so rsyslogd 1855 root mem REG 202,0 9844 32157 /lib/i386-linux-gnu/i686/cmov/libdl-2.13.so rsyslogd 1855 root mem REG 202,0 117009 32154 /lib/i386-linux-gnu/i686/cmov/libpthread-2.13.so rsyslogd 1855 root mem REG 202,0 79980 17746 /usr/lib/libz.so.1.2.3.4 rsyslogd 1855 root mem REG 202,0 18836 1061094 /usr/lib/rsyslog/lmnet.so rsyslogd 1855 root mem REG 202,0 117960 31845 /lib/i386-linux-gnu/ld-2.13.so rsyslogd 1855 root 0u unix 0xebe8e800 0t0 640 /dev/log rsyslogd 1855 root 3u FIFO 0,5 0t0 2474 /dev/xconsole rsyslogd 1855 root 4u unix 0xebe8e400 0t0 645 /var/spool/postfix/dev/log rsyslogd 1855 root 5r REG 0,3 0 4026532176 /proc/kmsg I was so frustrated that even reinstall the rsyslog package, but it still refuses to log anything: # apt-get remove --purge rsyslog # apt-get install rsyslog I thought someone had hacked the system, so run rkhunter, chkrootkit, unhide in an attempt to find hide processes / ports and nmap in a remote host to compare with the ports shown by netstat. And I know this doesn't mean anything, but all looks ok. The system also have an iptables firewall that is very restrictive with incoming / outgoing connections. This is driving me crazy, any idea what is going on here? [EDIT - disk space info] # df -h Filesystem Size Used Avail Use% Mounted on rootfs 24G 22G 629M 98% / /dev/root 24G 22G 629M 98% / devtmpfs 10M 112K 9.9M 2% /dev tmpfs 76M 48K 76M 1% /run tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 151M 40K 151M 1% /tmp tmpfs 151M 0 151M 0% /run/shm

    Read the article

  • Causes of sudden massive filesystem damage? ("root inode is not a directory")

    - by poolie
    I have a laptop running Maverick (very happily until yesterday), with a Patriot Torx SSD; LUKS encryption of the whole partition; one lvm physical volume on top of that; then home and root in ext4 logical volumes on top of that. When I tried to boot it yesterday, it complained that it couldn't mount the root filesystem. Running fsck, basically every inode seems to be wrong. Both home and root filesystems show similar problems. Checking a backup superblock doesn't help. e2fsck 1.41.12 (17-May-2010) lithe_root was not cleanly unmounted, check forced. Resize inode not valid. Recreate? no Pass 1: Checking inodes, blocks, and sizes Root inode is not a directory. Clear? no Root inode has dtime set (probably due to old mke2fs). Fix? no Inode 2 is in use, but has dtime set. Fix? no Inode 2 has a extra size (4730) which is invalid Fix? no Inode 2 has compression flag set on filesystem without compression support. Clear? no Inode 2 has INDEX_FL flag set but is not a directory. Clear HTree index? no HTREE directory inode 2 has an invalid root node. Clear HTree index? no Inode 2, i_size is 9581392125871137995, should be 0. Fix? no Inode 2, i_blocks is 40456527802719, should be 0. Fix? no Reserved inode 3 (<The ACL index inode>) has invalid mode. Clear? no Inode 3 has compression flag set on filesystem without compression support. Clear? no Inode 3 has INDEX_FL flag set but is not a directory. Clear HTree index? no .... Running strings across the filesystems, I can see there are what look like filenames and user data there. I do have sufficiently good backups (touch wood) that it's not worth grovelling around to pull back individual files, though I might save an image of the unencrypted disk before I rebuild, just in case. smartctl doesn't show any errors, neither does the kernel log. Running a write-mode badblocks across the swap lv doesn't find problems either. So the disk may be failing, but not in an obvious way. At this point I'm basically, as they say, fscked? Back to reinstalling, perhaps running badblocks over the disk, then restoring from backup? There doesn't even seem to be enough data to file a meaningful bug... I don't recall that this machine crashed last time I used it. At this point I suspect a bug or memory corruption caused it to write garbage across the disks when it was last running, or some kind of subtle failure mode for the SSD. What do you think would have caused this? Is there anything else you'd try?

    Read the article

  • obtaining nimbuzz server certificate for nmdecrypt expert in NetMon

    - by lurscher
    I'm using Network Monitor 3.4 with the nmdecrypt expert. I'm opening a nimbuzz conversation node in the conversation window and i click Expert- nmDecrpt - run Expert that shows up a window where i have to add the server certificate. I am not sure how to retrieve the server certificate for nimbuzz XMPP chat service. Any idea how to do this? this question is a follow up question of this one. Edit for some background so it might be that this is encrypted with the server pubkey and i cannot retrieve the message, unless i debug the native binary and try to intercept the encryption code. I have a test client (using agsXMPP) that is able to connect with nimbuzz with no problems. the only thing that is not working is adding invisible mode. It seems this is some packet sent from the official client during login which i want to obtain. any suggestions to try to grab this info would be greatly appreciated. Maybe i should get myself (and learn) IDA pro? This is what i get inspecting the TLS frames on Network Monitor: Frame: Number = 81, Captured Frame Length = 769, MediaType = ETHERNET + Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[...],SourceAddress:[....] + Ipv4: Src = ..., Dest = 192.168.2.101, Next Protocol = TCP, Packet ID = 9939, Total IP Length = 755 - Tcp: Flags=...AP..., SrcPort=5222, DstPort=3578, PayloadLen=715, Seq=4101074854 - 4101075569, Ack=1127356300, Win=4050 (scale factor 0x0) = 4050 SrcPort: 5222 DstPort: 3578 SequenceNumber: 4101074854 (0xF4716FA6) AcknowledgementNumber: 1127356300 (0x4332178C) + DataOffset: 80 (0x50) + Flags: ...AP... Window: 4050 (scale factor 0x0) = 4050 Checksum: 0x8841, Good UrgentPointer: 0 (0x0) TCPPayload: SourcePort = 5222, DestinationPort = 3578 TLSSSLData: Transport Layer Security (TLS) Payload Data - TLS: TLS Rec Layer-1 HandShake: Server Hello.; TLS Rec Layer-2 HandShake: Certificate.; TLS Rec Layer-3 HandShake: Server Hello Done. - TlsRecordLayer: TLS Rec Layer-1 HandShake: ContentType: HandShake: - Version: TLS 1.0 Major: 3 (0x3) Minor: 1 (0x1) Length: 42 (0x2A) - SSLHandshake: SSL HandShake ServerHello(0x02) HandShakeType: ServerHello(0x02) Length: 38 (0x26) - ServerHello: 0x1 + Version: TLS 1.0 + RandomBytes: SessionIDLength: 0 (0x0) TLSCipherSuite: TLS_RSA_WITH_AES_256_CBC_SHA { 0x00, 0x35 } CompressionMethod: 0 (0x0) - TlsRecordLayer: TLS Rec Layer-2 HandShake: ContentType: HandShake: - Version: TLS 1.0 Major: 3 (0x3) Minor: 1 (0x1) Length: 654 (0x28E) - SSLHandshake: SSL HandShake Certificate(0x0B) HandShakeType: Certificate(0x0B) Length: 650 (0x28A) - Cert: 0x1 CertLength: 647 (0x287) - Certificates: CertificateLength: 644 (0x284) - X509Cert: Issuer: nimbuzz.com,Nimbuzz,NL, Subject: nimbuzz.com,Nimbuzz,NL + SequenceHeader: - TbsCertificate: Issuer: nimbuzz.com,Nimbuzz,NL, Subject: nimbuzz.com,Nimbuzz,NL + SequenceHeader: + Tag0: + Version: (2) + SerialNumber: -1018418383 + Signature: Sha1WithRSAEncryption (1.2.840.113549.1.1.5) - Issuer: nimbuzz.com,Nimbuzz,NL - RdnSequence: nimbuzz.com,Nimbuzz,NL + SequenceOfHeader: 0x1 + Name: NL + Name: Nimbuzz + Name: nimbuzz.com + Validity: From: 02/22/10 20:22:32 UTC To: 02/20/20 20:22:32 UTC + Subject: nimbuzz.com,Nimbuzz,NL - SubjectPublicKeyInfo: RsaEncryption (1.2.840.113549.1.1.1) + SequenceHeader: + Algorithm: RsaEncryption (1.2.840.113549.1.1.1) - SubjectPublicKey: - AsnBitStringHeader: - AsnId: BitString type (Universal 3) - LowTag: Class: (00......) Universal (0) Type: (..0.....) Primitive TagValue: (...00011) 3 - AsnLen: Length = 141, LengthOfLength = 1 LengthType: LengthOfLength = 1 Length: 141 bytes BitString: + Tag3: + Extensions: - SignatureAlgorithm: Sha1WithRSAEncryption (1.2.840.113549.1.1.5) - SequenceHeader: - AsnId: Sequence and SequenceOf types (Universal 16) + LowTag: - AsnLen: Length = 13, LengthOfLength = 0 Length: 13 bytes, LengthOfLength = 0 + Algorithm: Sha1WithRSAEncryption (1.2.840.113549.1.1.5) - Parameters: Null Value - Sha1WithRSAEncryption: Null Value + AsnNullHeader: - Signature: - AsnBitStringHeader: - AsnId: BitString type (Universal 3) - LowTag: Class: (00......) Universal (0) Type: (..0.....) Primitive TagValue: (...00011) 3 - AsnLen: Length = 129, LengthOfLength = 1 LengthType: LengthOfLength = 1 Length: 129 bytes BitString: + TlsRecordLayer: TLS Rec Layer-3 HandShake:

    Read the article

  • How to connect FreeBSD Jail to network

    - by jgtumusiime
    So recently I successfully installed and configured a freebsd jail and I would like to install software within my jail but I cannot connect to the network. I'm trying to setup an apache+php+mysql installation within the jail and have the webserver accessible by users. Here is my rc.conf for the jail. ... jail_enable="YES" # Set to NO to disable starting of any jails jail_list="mambo2" # Space separated list of names of jails jail_mambo2_rootdir="/usr/jails/j01" # jail's root directory jail_mambo2_hostname="mambo2.ug" # jail's hostname jail_mambo2_ip="192.168.100.174" # jail's IP address jail_mambo2_devfs_enable="YES" # mount devfs in the jail jail_mambo2_devfs_ruleset="mambo2_ruleset" # devfs ruleset to apply to jail here is my jail ifconfig output mambo2# ifconfig rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 00:c1:28:00:48:db media: Ethernet autoselect (100baseTX <full-duplex>) status: active plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 mambo2# It does not show the IP address I configured within /etc/rc.conf. But, when I list the running jails, it shows the right IP address. Here is a list of jails running [root@mambo /usr/home/jtumusiime]# jls JID IP Address Hostname Path 5 192.168.100.174 mambo2.ug /usr/jails/j01 I also created a /etc/resolv.conf for nameservers. This was not in existence so I'm not quite sure if it is necessary? mambo2# cat /etc/resolv.conf nameserver 192.168.100.251 nameserver 8.8.8.8 mambo2# my host has 4 ip addresses, 3 public and one private: 192.168.100.173 I tried creating a jail using ezjail and this does not work out. [root@mambo /usr/src]# ezjail-admin update -p -i Error: Cannot find your copy of the FreeBSD source tree in . Consider using 'ezjail-admin install' to create the base jail from an ftp server. [root@mambo /usr/src]# I have an updated copy of freebsd 7.1 source tree from SVN in /usr/src/ [root@mambo /usr/src]# svn info Path: . URL: http://svn.freebsd.org/base/release/7.1.0 Repository Root: http://svn.freebsd.org/base Repository UUID: ccf9f872-aa2e-dd11-9fc8-001c23d0bc1f Revision: 243371 Node Kind: directory Schedule: normal Last Changed Author: kensmith Last Changed Rev: 186660 Last Changed Date: 2009-01-01 01:57:14 +0300 (Thu, 01 Jan 2009) [root@mambo /usr/src]# and I did #make buildworld while building the first jail i.e mambo2 Here is an excerpt of ouput of ezjail-admin install ... 221 Goodbye. Trying 193.162.146.4... Connected to ftp.freebsd.org. 220 ftp.beastie.tdk.net FTP server (Version 6.00LS) ready. 331 Guest login ok, send your email address as password. 230 Guest login ok, access restrictions apply. Remote system type is UNIX. Using binary mode to transfer files. 200 Type set to I. 550 pub/FreeBSD-Archive/old-releases/i386/7.1-RELEASE/base: No such file or directory. 221 Goodbye. Could not fetch base from ftp.freebsd.org. Maybe your release (7.1-RELEASE) is specified incorrectly or the host ftp.freebsd.org does not provide that release build. Use the -r option to specify an existing release or the -h option to specify an alternative ftp server. Querying your ftp-server... The ftp server you specified (ftp.freebsd.org) seems to provide the following builds: Trying 193.162.146.4... total 10 drwxrwxr-x 13 1006 1006 512 Feb 20 2011 8.2-RELEASE drwxrwxr-x 13 1006 1006 512 Apr 10 2012 8.3-RELEASE lrwxr-xr-x 1 1006 1006 16 Jan 7 2012 9.0-RELEASE -> i386/9.0-RELEASE drwxrwxr-x 7 1006 1006 1024 Feb 19 2012 ISO-IMAGES -rw-rw-r-- 1 1006 1006 637 Nov 23 2005 README.TXT drwxrwxr-x 5 1006 1006 512 Nov 2 02:59 i386 I do not want to upgrade my freebsd installation. I have googled around; but all in vail. Thank you

    Read the article

  • Distributed and/or Parallel SSIS processing

    - by Jeff
    Background: Our company hosts SaaS DSS applications, where clients provide us data Daily and/or Weekly, which we process & merge into their existing database. During business hours, load in the servers are pretty minimal as it's mostly users running simple pre-defined queries via the website, or running drill-through reports that mostly hit the SSAS OLAP cube. I manage the IT Operations Team, and so far this has presented an interesting "scaling" issue for us. For our daily-refreshed clients, the server is only "busy" for about 4-6 hrs at night. For our weekly-refresh clients, the server is only "busy" for maybe 8-10 hrs per week! We've done our best to use some simple methods of distributing the load by spreading the daily clients evenly among the servers such that we're not trying to process daily clients back-to-back over night. But long-term this scaling strategy creates two notable issues. First, it's going to consume a pretty immense amount of hardware that sits idle for large periods of time. Second, it takes significant Production Support over-head to basically "schedule" the ETL such that they don't over-lap, and move clients/schedules around if they out-grow the resources on a particular server or allocated time-slot. As the title would imply, one option we've tried is running multiple SSIS packages in parallel, but in most cases this has yielded VERY inconsistent results. The most common failures are DTExec, SQL, and SSAS fighting for physical memory and throwing out-of-memory errors, and ETLs running 3,4,5x longer than expected. So from my practical experience thus far, it seems like running multiple ETL packages on the same hardware isn't a good idea, but I can't be the first person that doesn't want to scale multiple ETLs around manual scheduling, and sequential processing. One option we've considered is virtualizing the servers, which obviously doesn't give you any additional resources, but moves the resource contention onto the hypervisor, which (from my experience) seems to manage simultaneous CPU/RAM/Disk I/O a little more gracefully than letting DTExec, SQL, and SSAS battle it out within Windows. Question to the forum: So my question to the forum is, are we missing something obvious here? Are there tools out there that can help manage running multiple SSIS packages on the same hardware? Would it be more "efficient" in terms of parallel execution if instead of running DTExec, SQL, and SSAS same machine (with every machine running that configuration), we run in pairs of three machines with SSIS running on one machine, SQL on another, and SSAS on a third? Obviously that would only make sense if we could process more than the three ETL we were able to process on the machine independently. Another option we've considered is completely re-architecting our SSIS package to have one "master" package for all clients that attempts to intelligently chose a server based off how "busy" it already is in terms of CPU/Memory/Disk utilization, but that would be a herculean effort, and seems like we're trying to reinvent something that you would think someone would sell (although I haven't had any luck finding it). So in summary, are we missing an obvious solution for this, and does anyone know if any tools (for free or for purchase, doesn't matter) that facilitate running multiple SSIS ETL packages in parallel and on multiple servers? (What I would call a "queue & node based" system, but that's not an official term). Ultimately VMWare's Distributed Resource Scheduler addresses this as you simply run a consistent number of clients per VM that you know will never conflict scheduleing-wise, then leave it up to VMWare to move the VMs around to balance out hardware usage. I'm definitely not against using VMWare to do this, but since we're a 100% Microsoft app stack, it seems like -someone- out there would have solved this problem at the application layer instead of the hypervisor layer by checking on resource utilization at the OS, SQL, SSAS levels. I'm open to ANY discussion on this, and remember no suggestion is too crazy or radical! :-) Right now, VMWare is the only option we've found to get away from "manually" balancing our resources, so any suggestions that leave us on a pure Microsoft stack would be great. Thanks guys, Jeff

    Read the article

  • suddenly can't connect to router

    - by Khoi
    I was just downloading some stuff in ubuntu and snap, the connection cut and I can't even connect to my router. And the router, it still works fine, my laptop can connect wirelessly to it as usual. But my main computer (which connects to it directly through cable) can't even ping it. Here is my ipconfig: Windows IP Configuration Host Name . . . . . . . . . . . . : vento Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Realtek RTL8169/8110 Family Gigabit Ethernet NIC Physical Address. . . . . . . . . : 00-19-DB-4E-6C-56 Ethernet adapter {15B1F740-2F35-4FE4-9FEE-4052AFBAD096}: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Anchorfree HSS Adapter - Packet Sche duler Miniport Physical Address. . . . . . . . . : 00-FF-15-B1-F7-40

    Read the article

  • Python soap using soaplib (server) and suds (client)

    - by Celso Axelrud
    This question is related to: http://stackoverflow.com/questions/1751027/python-soap-server-client In the case of soap with python, there are recommendation to use soaplib (http://wiki.github.com/jkp/soaplib) as soap server and suds (https://fedorahosted.org/suds/) as soap client. My target is to create soap services in python that can be consumed by several clients (java, etc). I tried the HelloWorld example from soaplib (http://trac.optio.webfactional.com/wiki/HelloWorld). It works well when the client is also using soaplib. Then, I tried to use suds as client consuming the HelloWorld services and it fail. -Why this is happening? Does soaplib server has problems to consumed by different clients? Here the code for the server: from soaplib.wsgi_soap import SimpleWSGISoapApp from soaplib.service import soapmethod from soaplib.serializers.primitive import String, Integer, Arraycode class HelloWorldService(SimpleWSGISoapApp): @soapmethod(String,Integer,_returns=Array(String)) def say_hello(self,name,times): results = [] for i in range(0,times): results.append('Hello, %s'%name) return results if __name__=='__main__': from cherrypy.wsgiserver import CherryPyWSGIServer #from cherrypy._cpwsgiserver import CherryPyWSGIServer # this example uses CherryPy2.2, use cherrypy.wsgiserver.CherryPyWSGIServer for CherryPy 3.0 server = CherryPyWSGIServer(('localhost',7789),HelloWorldService()) server.start() This is the soaplib client: from soaplib.client import make_service_client from SoapServerTest_1 import HelloWorldService client = make_service_client('http://localhost:7789/',HelloWorldService()) print client.say_hello("Dave",5) Results: >>> ['Hello, Dave', 'Hello, Dave', 'Hello, Dave', 'Hello, Dave', 'Hello, Dave'] This is the suds client: from suds.client import Client url = 'http://localhost:7789/HelloWordService?wsdl' client1 = Client(url) client1.service.say_hello("Dave",5) Results: >>> Unhandled exception while debugging... Traceback (most recent call last): File "C:\Python25\Lib\site-packages\RTEP\Sequencing\SoapClientTest_1.py", line 10, in <module> client1.service.say_hello("Dave",5) File "c:\python25\lib\site-packages\suds\client.py", line 537, in __call__ return client.invoke(args, kwargs) File "c:\python25\lib\site-packages\suds\client.py", line 597, in invoke result = self.send(msg) File "c:\python25\lib\site-packages\suds\client.py", line 626, in send result = self.succeeded(binding, reply.message) File "c:\python25\lib\site-packages\suds\client.py", line 658, in succeeded r, p = binding.get_reply(self.method, reply) File "c:\python25\lib\site-packages\suds\bindings\binding.py", line 158, in get_reply result = unmarshaller.process(nodes[0], resolved) File "c:\python25\lib\site-packages\suds\umx\typed.py", line 66, in process return Core.process(self, content) File "c:\python25\lib\site-packages\suds\umx\core.py", line 48, in process return self.append(content) File "c:\python25\lib\site-packages\suds\umx\core.py", line 63, in append self.append_children(content) File "c:\python25\lib\site-packages\suds\umx\core.py", line 140, in append_children cval = self.append(cont) File "c:\python25\lib\site-packages\suds\umx\core.py", line 61, in append self.start(content) File "c:\python25\lib\site-packages\suds\umx\typed.py", line 77, in start found = self.resolver.find(content.node) File "c:\python25\lib\site-packages\suds\resolver.py", line 341, in find frame = Frame(result, resolved=known, ancestry=ancestry) File "c:\python25\lib\site-packages\suds\resolver.py", line 473, in __init__ resolved = type.resolve() File "c:\python25\lib\site-packages\suds\xsd\sxbasic.py", line 63, in resolve raise TypeNotFound(qref) TypeNotFound: Type not found: '(string, HelloWorldService.HelloWorldService, )'

    Read the article

  • System.ServiceModel.Syndication.SyndicationFeed throws when the RSS document includes a <script> blo

    - by Cheeso
    The code: using (XmlReader xmlr = XmlReader.Create(new StringReader(allXml))) { var items = from item in SyndicationFeed.Load(xmlr).Items select item; } The exception: Exception: System.Xml.XmlException: Unexpected node type Element. ReadElementString method can only be called on elements with simple or empty content. Line 11, position 25. at System.Xml.XmlReader.ReadElementString() at System.ServiceModel.Syndication.Rss20FeedFormatter.ReadXml(XmlReader reader, SyndicationFeed result) at System.ServiceModel.Syndication.Rss20FeedFormatter.ReadFeed(XmlReader reader) at System.ServiceModel.Syndication.Rss20FeedFormatter.ReadFrom(XmlReader reader) at System.ServiceModel.Syndication.SyndicationFeed.Load[TSyndicationFeed](XmlReader reader) at System.ServiceModel.Syndication.SyndicationFeed.Load(XmlReader reader) at Ionic.ToolsAndTests.ReadRss.Run() in c:\dev\dotnet\ReadRss.cs:line 90 The XML content: <?xml version="1.0" encoding="utf-8"?> <?xml-stylesheet type="text/xsl" href="https://www.ibm.com/developerworks/mydeveloperworks/blogs/roller-ui/styles/rss.xsl" media="screen"?><rss version="2.0" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:atom="http://www.w3.org/2005/Atom" > <channel> <title>Software architecture, software engineering, and Renaissance Jazz</title> <link>https://www.ibm.com/developerworks/mydeveloperworks/blogs/gradybooch</link> <atom:link rel="self" type="application/rss+xml" href="https://www.ibm.com/developerworks/mydeveloperworks/blogs/gradybooch/feed/entries/rss?lang=en" /> <description>Software architecture, software engineering, and Renaissance Jazz</description> <language>en-us</language> <copyright>Copyright <script type='text/javascript'> document.write(blogsDate.date.localize (1273534889181));</script></copyright> <lastBuildDate>Mon, 10 May 2010 19:41:29 -0400</lastBuildDate> As you can see, on line 11, at position 25, there's a script block inside the <copyright> element. Other people have reported similar errors with other XML documents. The way I worked around this was to do a StreamReader.ReadToEnd, then do Regex.Replace on the result of that to yank out the script block, before passing the modified string to XmlReader.Create(). Feels like a hack. Has anyone got a better approach? I don't like this because I have to read in a 125k string into memory. Is it valid rss to include "complex content" like that - a script block inside an element?

    Read the article

  • WpfToolkit DataGrid does not work in Windows Phone 7

    - by Igor Zevaka
    I am trying to use WpfToolkit DataGrid in Windows Phone 7 project (Silverligt 4) and it's not working. Here is the XAML: <UserControl x:Class="SilverlightControls.Grid" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" xmlns:wtk="clr-namespace:Microsoft.Windows.Controls;assembly=WPFToolkit" d:DesignHeight="480" d:DesignWidth="480"> <Grid x:Name="LayoutRoot" Background="#FF1F1F1F" Width="960"> <Grid x:Name="TitleGrid"> <TextBlock Text="{Binding Title}" Style="{StaticResource PhoneTextPageTitle2Style}"/> </Grid> <wtk:DataGrid> </wtk:DataGrid> </Grid> </UserControl> The project compiles fine but crashes at runtime trying to load this control. The best clue I got so far is from Visual Studio Designer. Once I add wtk:DataGrid to the control the visual designer does not load and below is the exception it displays. Could it be that WpfToolkit relies on PresentationFramework.dll and it's not available in SL4? System.Reflection.Adds.UnresolvedAssemblyException Type universe cannot resolve assembly: PresentationFramework, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35. at System.Reflection.Adds.AssemblyProxy.GetResolvedAssembly() at System.Reflection.Adds.AssemblyProxy.get_FullName() at Microsoft.Windows.Design.Metadata.ReflectionMetadataContext.PrepareAttributes(Reflectable`1 reflectableAssembly) at Microsoft.Windows.Design.Metadata.ReflectionMetadataContext.PrepareAttributes(Reflectable`1 reflectableType) at MS.Internal.Metadata.ClrType.GetAttributes[T](ReflectionMetadataContext context, IReflectable`1 member, ITypeMetadata attributeType, Boolean merge, AttributeMergeCache& cache) at MS.Internal.Metadata.ClrMember`1.GetLocalAttributes(ITypeMetadata attributeType) at MS.Internal.Design.Metadata.Xaml.XamlType.GetSpecialProperty(Int32 idx, PropertyIdentifier pid) at MS.Internal.Design.Metadata.Xaml.XamlType.get_ContentProperty() at Microsoft.Windows.Design.Metadata.Xaml.XamlExtensionImplementations.GetContentProperty(ITypeMetadata sourceType) at Microsoft.Windows.Design.Metadata.Xaml.XamlExtensions.GetContentProperty(ITypeMetadata source) at MS.Internal.Design.Metadata.ReflectionTypeNode.get_ContentProperty() at MS.Internal.Design.Markup.XmlElement.CalcChildWhitespaceImportant(XamlElement element) at MS.Internal.Design.Markup.XmlElement.ConvertChildrenToXaml(XamlElement result, PrefixScope scope, IParseContext context, IMarkupSourceProvider provider, Boolean childrenAsString) at MS.Internal.Design.Markup.XmlElement.ConvertToXaml(XamlElement parent, PrefixScope parentScope, IParseContext context, IMarkupSourceProvider provider) at MS.Internal.Design.Markup.XmlElement.ConvertChildrenToXaml(XamlElement result, PrefixScope scope, IParseContext context, IMarkupSourceProvider provider, Boolean childrenAsString) at MS.Internal.Design.Markup.XmlElement.ConvertToXaml(XamlElement parent, PrefixScope parentScope, IParseContext context, IMarkupSourceProvider provider) at MS.Internal.Design.DocumentModel.DocumentTrees.Markup.XamlSourceDocument.ParseElementFromSkeleton(XamlParseContext context, SkeletonNode node, XamlElement parent, Boolean fullElement) at MS.Internal.Design.DocumentModel.DocumentTrees.Markup.XamlSourceDocument.UpdateSkeleton(IDamageListener listener) at Microsoft.Windows.Design.DocumentModel.Trees.MarkupDocumentTreeManager.Update() at Microsoft.Windows.Design.DocumentModel.MarkupProducer.Update() at Microsoft.Windows.Design.DocumentModel.MarkupProducer.HandleMessage(DocumentTreeCoordinator sender, MessageKey key, MessageArguments args) at Microsoft.Windows.Design.DocumentModel.MarkupProducer.Microsoft.Windows.Design.DocumentModel.IDocumentTreeConsumer.HandleMessage(DocumentTreeCoordinator sender, MessageKey key, MessageArguments args) at Microsoft.Windows.Design.DocumentModel.DocumentTreeCoordinator.SendMessage[T](MessageKey`1 key, T args, Boolean isPrivateMessage) at Microsoft.Windows.Design.DocumentModel.DocumentTreeCoordinator.QueuedMessage`1.Microsoft.Windows.Design.DocumentModel.IQueuedMessage.Invoke() at Microsoft.Windows.Design.DocumentModel.DocumentTreeCoordinator.ProcessQueuedMessages(Object state) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs) at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)

    Read the article

  • .Net Intermittent System.Web.Services.Protocols.SoapHeaderException

    - by ScottE
    We have a .net 3.5 web app that consumes third party web services. The proxy was created by adding a web reference to their wsdl. This proxy is not compiled. Our error logging is picking up frequent but intermittent exceptions: An exception of type 'System.Web.Services.Protocols.SoapHeaderException' occurred and was caught If I follow the url to the page that generated the exception, I can't recreate it. Edit: Here is most of the exception - where it bubbled up from Message : Internal Error Type : System.Web.Services.Protocols.SoapHeaderException, System.Web.Services, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a Source : System.Web.Services Help link : Actor : Code : http://schemas.xmlsoap.org/soap/envelope/:Client Detail : Lang : Node : Role : SubCode : Data : System.Collections.ListDictionaryInternal TargetSite : System.Object[] ReadResponse(System.Web.Services.Protocols.SoapClientMessage, System.Net.WebResponse, System.IO.Stream, Boolean) Stack Trace : at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at Vendor.getSearch(getSearchRequest getSearchRequest) in c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\root\be43c34e\b09edc7e\App_WebReferences.pww-cf-q.0.cs:line 73 Edit 2: Inner exceptions: I sometimes get the following inner exceptions logged: Message : Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. Type : System.IO.IOException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 Source : System Help link : Data : System.Collections.ListDictionaryInternal TargetSite : Int32 Read(Byte[], Int32, Int32) Stack Trace : at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult) at System.Net.TlsStream.CallProcessAuthentication(Object state) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.ConnectStream.WriteHeaders(Boolean async) And/Or: Message : An existing connection was forcibly closed by the remote host Type : System.Net.Sockets.SocketException, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 Source : System Help link : ErrorCode : 10054 SocketErrorCode : ConnectionReset NativeErrorCode : 10054 Data : System.Collections.ListDictionaryInternal TargetSite : Int32 Receive(Byte[], Int32, Int32, System.Net.Sockets.SocketFlags) Stack Trace : at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags) at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) Update We're still working on it. Originally there was a route issue, which was resolved. We're still getting the inner exception with socket errors. We had MS support involved today, and they looked at some traces and network captures. The web service host does round-robin DNS, and they may be responding on a different IP address for the syn syn/ack from one ip, and the next from a different ip. This is not good. This is likely quite specific to our situation, but perhaps it applies to others as well. Microsoft Network Monitor and an application trace got us the information we needed.

    Read the article

  • Use Dojo Drag and Drop together with Dojo Moveable

    - by Select0r
    Hi, I'm using Dojo.dnd to transfer items between to areas. The problem is: the items will snap into place once I drop them, but I'd like to have them stay where I drop them, but only for one area. Here's a little code to explain this better: <div id="dropZone" class="dropZone"> <div id="itemNodes"></div> <div id="targetZone" dojoType="dojo.dnd.Source"></div> </div> "dropZone" is a DIV that contains two dojo.dnd.Source-areas, "itemNodes" (created programmatically) and "targetZone". Items (DIVs with images) should be dragged from a simple list out of "itemNodes" into "targetZone" and stay where they are dropped. As soon as they are dragged out of "targetZone" they should snap back to the list inside "itemNodes". Here's the code I use to create the items: var nodelist = new dojo.dnd.Source("itemNodes"); {Smarty-Loop} nodelist.insertNodes(false, ['<img class="dragItem" src="{$items->info.itemtext}" alt="{$items->info.itemtext}" border="0" />']); {/Smarty-Loop} But this way I just have two lists of items, the items dropped into "targetZone" won't stay where I dropped them. I've tried a loop dojo.query(".dojoDndItem").forEach(function(node) to grab all items and change them to a "moveable"-type: using dojo.dnd.move.constrainedMoveable will change the items so they can always be moved around (even in "itemNodes") using dojo.dnd.move.boxConstrainedMoveable and defining the "box" to the borders of "targetZone" makes it possible to just move the items around inside "targetZone", but as soon as I drop them, I can't grab and move them back out So here's the question: is it possible to create two dnd.Sources where I can move items back and forth and let the items be "moveable" only in one of the sources?Or is there a workaround like making the items moveable and if they're not dropped into "targetZone" they'll be moved back to the list in "itemNodes" automatically? Once the page is submitted, I have to save the position of every item that has been placed into "targetZone". (The next step will be positioning the items inside "targetZone" on page load if the grid has already been filled before, but I'd be happy to just get the thing working in the first place.) Any hint is appreciated. Greetings, Select0r

    Read the article

  • Existing web-site CSS replacement (re-skinning) best-practices without changing the HTML

    - by Enigmativity
    I can see a number of other good answers to questions relating to CSS best-practices on stack overflow: How to Manage CSS Explosion CSS Conventions / Code Layout Models Are there any CSS standards that I should follow while writing my first stylesheet? What is the best method for tidying CSS? Best Practices - CSS Stylesheet Formatting But I think I have a different problem. I'm trying to "re-skin" an existing site that has been nicely built using div's and ul's, etc, and it has a good existing CSS file, but when I start making changes to the CSS I quickly find that I break the layout. My feeling is that it is very hard to get a feel for how all the CSS will work together and indeed what CSS is affecting parent and sibling elements in the HTML. So, my question is "what are the best-practices around re-skinning an existing web-site by replacing the CSS only and not modifying the existing HTML?" I can't change the classes, ids, node hierarchy, etc. An example of the particular site that I am trying to re-skin is http://demo.nopcommerce.com/. The existing CSS can be as complicated/detailed as this extract from the main CSS file: .header-selectors-wrapper { text-align: right; float: right; width: 500px; } .header-currencyselector { float: right; } .header-languageselector { float: left; } .header-taxDisplayTypeSelector { float: right; } .header-links-wrapper { float: right; text-align: right; width: 570px; } .header-links { border: solid 1px #9a9a9a; padding: 5px 5px 5px 5px; margin-bottom: 5px; display: inline-table; } .order-summary-content .cart .cart-item-row td, .wishlist-content .cart .cart-item-row td { border-bottom: 1px solid #c5c5c5; vertical-align: middle; line-height: 30px; } .order-summary-content .cart .cart-item-row td.product, .wishlist-content .cart .cart-item-row td.product { text-align: left; padding: 0px 10px 0px 10px; } .order-summary-content .cart .cart-item-row td.product a, .wishlist-content .cart .cart-item-row td.product a { font-weight: bold; } Any help would be appreciated.

    Read the article

  • Delete Nodes + attributes that match Xpath except specific attributes

    - by Ryan Ternier
    I'm trying to find the best (efficient) way of doing this. I have a medium sized XML document. Depending on specific settings certain portions of it need to be filtered out for security reasons. I'll be doing this in XSLT as it's configurable and no code should need changing. I've looked around, but not getting much luck on it. For example: I have the following XPath: //*[@root='2.16.840.1.113883.3.51.1.1.6.1'] Whicrooth gives me all nodes with a root attribute equal to a specific OID. In these nodes I want to have all attributes except for a few (ex. foo and bar) erased, and then having another attribute added (ex. reason) I also need to have multiple XPath expressions that can be ran to zero down on a specific node and clear it's contents out in a similar fashion, with respect to nodes with specific attributes. I'm playing around with information from: XPath expression to select all XML child nodes except a specific list? and XSLT Remove Elements and/or Attributes by Name per XSL Parameters Will update shortly when I can have access what what I"ve done so far. Example: XML Before Transformation <root> <childNode> <innerChild root="2.16.840.1.113883.3.51.1.1.6.1" a="b" b="c" type="innerChildness"/> <innerChildSibling/> </childNode> <animals> <cat> <name>bob</name> </cat> </animals> <tree/> <water root="2.16.840.1.113883.3.51.1.1.6.1" z="zed" l="ell" type="liquidLIke"/> </root> After <root> <childNode> <innerChild root="2.16.840.1.113883.3.51.1.1.6.1" flavor="MSK"/> <!-- filtered --> <innerChildSibling/> </childNode> <animals> <cat flavor="MSK" /> <!-- cat was filtered --> </animals> <tree/> <water root="2.16.840.1.113883.3.51.1.1.6.1" flavor="MSK"/> <!-- filtered --> </root>

    Read the article

  • PopulateOnDemand does not work on data bound ASP.Net TreeView

    - by Shay Friedman
    Hi, I have a TreeView that is bound to a XmlDataSource control. I've added some TreeNodeBinding elements to define how I want the XML data to be shown. I have also added PopulateOnDemand=true to these TreeNodeBindings. However, doing so didn't change a thing and the entire XML tree is displayed. Moreover, the TreeNodePopulate event is not fired on node expand as well. Important information: I'm using ASP.NET 4. This is an example that reproduces the problem (very straight forward): <%@ Page Language="C#" AutoEventWireup="true" %> <script type="text/C#" runat="server"> protected void TreeView1_TreeNodePopulate(Object sender, TreeNodeEventArgs e) { // This method is never called... } </script> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title></title> </head> <body> <form id="form1" runat="server"> <div> <asp:TreeView ID="TreeView1" runat="server" DataSourceID="XmlDataSource1" OnTreeNodePopulate="TreeView1_TreeNodePopulate" ExpandDepth="0"> <DataBindings> <asp:TreeNodeBinding DataMember="#" TextField="#" ValueField="#" PopulateOnDemand="true" /> </DataBindings> </asp:TreeView> <asp:XmlDataSource ID="XmlDataSource1" runat="server" DataFile="Sample.xml" /> </div> </form> </body> </html> The Sample.xml can be any xml file you want, it doesn't really matter. I tried to put a breakpoint within the TreeView1_TreeNodePopulate method and it was never hit. I also tried to: Set a TreeNodeBinding for each possible data member with PopulateOnDemand="true". Via code, go through all tree nodes and set their PopulateOnDemand property to true. Nothing worked. The only way the populate-on-demand thing worked was when I added nodes manually to the nodes instead of binding it to a data source. What am I doing wrong?

    Read the article

  • OCR an RSA key fob (security token)

    - by user130582
    I put together a quick WinForm/embedded IE browser control which logs into our company's bank website each morning and scrapes/exports the desired deposit information (the bank is a smallish regional bank). Since we have a few dozen "pseudoaccounts" that draw from the same master account, this actually takes 10-15 minutes to retrieve. Anyway, the only problem is that our business bank account reuires an RSA security token (http://www.rsa.com/node.aspx?id=1156)--if you are not familiar, it is a small device which shows a random 6 digit number every 15(?) seconds, so I have to prompt for this value before starting. This is on top of the website's login based security model, so even if you create a read-only account that can't do anything, you still have to put the RSA number in. We have 5 of these tokens for different people in the company. From our perspective this is nusiance security. I was joking about using a web camera to OCR the digits from the key fob so they didn't have to type it in -- mainly so that the scraping/export would be done before anyone arrives in the morning. Well, they asked if I could really do it. So now I ask you, how hard (how many hours) do you think it would take to OCR these digits reliably from a JPEG image produced by the camera? I already know I can get the JPEG easily. I think you get 3 tries to log in, so it really needs to hit a 99% accuracy rate. I could work on this on my off time, but they don't want me to put more than a few hours into it, so I want to leverage as much existing code as possible. This is a 7-segment display (like an alarm clock) so it's not exactly text that an OCR package would be used to seeing. Also--there is a countdown timer on the side of the display; typically when it is down to 1 bar, you wait until the next number appears and it starts over at 5 bars (like signal strength on your cell phone). So this would need to be OCRd as well but it is not text. Anyway the more I think about it as I type this, the less convinced I am that I can truly get this right, so maybe I should just work on it in my spare time?

    Read the article

  • XmlReader throws on an RSS feed, when the RSS document includes an embedded <script> block.

    - by Cheeso
    The code: using (XmlReader xmlr = XmlReader.Create(new StringReader(allXml))) { var items = from item in SyndicationFeed.Load(xmlr).Items select item; } The exception: Exception: System.Xml.XmlException: Unexpected node type Element. ReadElementString method can only be called on elements with simple or empty content. Line 11, position 25. at System.Xml.XmlReader.ReadElementString() at System.ServiceModel.Syndication.Rss20FeedFormatter.ReadXml(XmlReader reader, SyndicationFeed result) at System.ServiceModel.Syndication.Rss20FeedFormatter.ReadFeed(XmlReader reader) at System.ServiceModel.Syndication.Rss20FeedFormatter.ReadFrom(XmlReader reader) at System.ServiceModel.Syndication.SyndicationFeed.Load[TSyndicationFeed](XmlReader reader) at System.ServiceModel.Syndication.SyndicationFeed.Load(XmlReader reader) at Ionic.ToolsAndTests.ReadRss.Run() in c:\dev\dotnet\ReadRss.cs:line 90 The XML content: <?xml version="1.0" encoding="utf-8"?> <?xml-stylesheet type="text/xsl" href="https://www.ibm.com/developerworks/mydeveloperworks/blogs/roller-ui/styles/rss.xsl" media="screen"?><rss version="2.0" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:atom="http://www.w3.org/2005/Atom" > <channel> <title>Software architecture, software engineering, and Renaissance Jazz</title> <link>https://www.ibm.com/developerworks/mydeveloperworks/blogs/gradybooch</link> <atom:link rel="self" type="application/rss+xml" href="https://www.ibm.com/developerworks/mydeveloperworks/blogs/gradybooch/feed/entries/rss?lang=en" /> <description>Software architecture, software engineering, and Renaissance Jazz</description> <language>en-us</language> <copyright>Copyright <script type='text/javascript'> document.write(blogsDate.date.localize (1273534889181));</script></copyright> <lastBuildDate>Mon, 10 May 2010 19:41:29 -0400</lastBuildDate> As you can see, on line 11, at position 25, there's a script block inside the <copyright> element. Other people have reported similar errors with other XML documents. The way I worked around this was to do a StreamReader.ReadToEnd, then do Regex.Replace on the result of that to yank out the script block, before passing the modified string to XmlReader.Create(). Feels like a hack. Has anyone got a better approach? I don't like this because I have to read in a 125k string into memory. Is it valid rss to include "complex content" like that - a script block inside an element? Thanks.

    Read the article

  • Seeking for faster $.(':data(key)')

    - by PoltoS
    I'm writing an extension to jQuery that adds data to DOM elements using el.data('lalala', my_data); and then uses that data to upload elements dynamically. Each time I get new data from the server I need to update all elements having el.data('lalala') != null; To get all needed elements I use an extension by James Padolsey: $(':data(lalala)').each(...); Everything was great until I came to the situation where I need to run that code 50 times - it is very slow! It takes about 8 seconds to execute on my page with 3640 DOM elements var x, t = (new Date).getTime(); for (n=0; n < 50; n++) { jQuery(':data(lalala)').each(function() { x++; }); }; console.log(((new Date).getTime()-t)/1000); Since I don't need RegExp as parameter of :data selector I've tried to replace this by var x, t = (new Date).getTime(); for (n=0; n < 50; n++) { jQuery('*').each(function() { if ($(this).data('lalala')) x++; }); }; console.log(((new Date).getTime()-t)/1000); This code is faster (5 sec), but I want get more. Q Are there any faster way to get all elements with this data key? In fact, I can keep an array with all elements I need, since I execute .data('key') in my module. Checking 100 elements having the desired .data('lalala') is better then checking 3640 :) So the solution would be like for (i in elements) { el = elements[i]; .... But sometimes elements are removed from the page (using jQuery .remove()). Both solutions described above [$(':data(lalala)') solution and if ($(this).data('lalala'))] will skip removed items (as I need), while the solution with array will still point to removed element (in fact, the element would not be really deleted - it will only be deleted from the DOM tree - because my array will still have a reference). I found that .remove() also removes data from the node, so my solution will change into var toRemove = []; for (vari in elements) { var el = elements[i]; if ($(el).data('lalala')) .... else toRemove.push(i); }; for (var ii in toRemove) elements.splice(toRemove[ii], 1); // remove element from array This solution is 100 times faster! Q Will the garbage collector release memory taken by DOM elements when deleted from that array? Remember, elements have been referenced by DOM tree, we made a new reference in our array, then removed with .remove() and then removed from the array. Is there a better way to do this?

    Read the article

  • Backbone.Marionette - Collection within CompositeView, which itself is nested in a CollectionView

    - by nicefinly
    *UPDATE: The problem probably involves the tour-template as I've discovered that it thinks the 'name' attribute is undefined. This leads me to think that it's not an array being passed on to the ToursView, but for some reason a string. * After studying similar questions on StackOverflow: How to handle nested CompositeView using Backbone.Marionette? How do you properly display a Backbone marionette collection view based on a model javascript array property? Nested collections with Backbone.Marionette ... and Derick Bailey's excellent blog's on this subject: http://lostechies.com/derickbailey/2012/04/05/composite-views-tree-structures-tables-and-more/ ... including the JSFiddle's: http://jsfiddle.net/derickbailey/AdWjU/ I'm still having trouble with a displaying the last node of a nested CollectionView of CompositeViews. It is the final CollectionView within each CompositeView that is causing the problem. CollectionView { CompositeView{ CollectionView {} //**<-- This is the troublemaker!** } } NOTE: I have already made a point of creating a valid Backbone.Collection given that the collection passed on to the final, child CollectionView is just a simple array. Data returned from the api to ToursList: [ { "id": "1", "name": "Venice", "theTours": "[ {'name': u'test venice'}, {'name': u'test venice 2'} ]" }, { "id": "2", "name": "Rome", "theTours": "[ {'name': u'Test rome'} ]" }, { "id": "3", "name": "Dublin", "theTours": "[ {'name': u'test dublin'}, {'name': u'test dublin 2'} ]" } ] I'm trying to nest these in a dropdown where the nav header is the 'name' (i.e. Dublin), and the subsequent li 's are the individual tour names (i.e. 'test dublin', 'test dublin2', etc.) Tour Models and Collections ToursByLoc = TastypieModel.extend({}); ToursList = TastypieCollection.extend({ model: ToursByLoc, url:'/api/v1/location/', }); Tour Views ToursView = Backbone.Marionette.ItemView.extend({ template: '#tour-template', tagName: 'li', }); ToursByLocView = Backbone.Marionette.CompositeView.extend({ template: '#toursByLoc-template', itemView: ToursView, initialize: function(){ //As per Derick Bailey's comments regarding the need to pass on a //valid Backbone.Collection to the child CollectionView //REFERENCE: http://stackoverflow.com/questions/12163118/nested-collections-with-backbone-marionette var theTours = this.model.get('theTours'); this.collection = new Backbone.Collection(theTours); }, appendHtml: function(collectionView, itemView){ collectionView.$('div').append(itemView.el); } }); ToursListView = Backbone.Marionette.CollectionView.extend({ itemView: ToursByLocView, }); Templates <script id="tour-template" type="text/template"> <%= name %> </script> <script id="toursByLoc-template" type="text/template"> <li class="nav-header"><%= name %></li> <div class="indTours"></div> <li class="divider"></li> </script>

    Read the article

  • Using FluentNHibernate + SQLite with .Net4?

    - by stiank81
    I have a WPF application running with .Net3.5 using FluentNHibernate, and all works fine. When I upgraded to VS2010 I ran into some odd problems, but after changing to use x64 variant of SQLite it worked fine again. Now I want to change to use .Net4, but this has turned into a more painful experience then I expected.. When calling FluentConfiguration.BuildConfiguration I get an exception thrown: FluentConfigurationException unhandled An invalid or incomplete configuration was used while creating a SessionFactory. Check PotentialReasons collection, and InnerException for more detail The inner exception gives us more information: Message = "Could not create the driver from NHibernate.Driver.SQLite20Driver, NHibernate, Version=2.1.2.4000, Culture=neutral, PublicKeyToken=aa95f207798dfdb4." It has an InnerException again: Exception has been thrown by the target of an invocation. Which again has an InnerException: The IDbCommand and IDbConnection implementation in the assembly System.Data.SQLite could not be found. Ensure that the assembly System.Data.SQLite is located in the application directory or in the Global Assembly Cache. If the assembly is in the GAC, use element in the application configuration file to specify the full name of the assembly. Now - to me it sounds like it doesn't find System.Data.SQLite.dll, but I can't understand this. Everywhere this is referenced I have "Copy Local", and I have verified that it is in every build folder for projects using SQLite. I have also copied it manually to every Debug folder of the solution - without luck. Notes: This exact same code worked just fine before I upgraded to .Net4. I did see some x64 x86 mismatch problems earlier, but I have switched to use x86 as the target platform and for all referenced dlls. I have verified that all files in the Debug-folder are x86. I have tried the precompiled Fluent dlls, I have tried compiling myself, and I have compiled my own version of Fluent using .Net4. I see that there are also others that have seen this problem, but I haven't really seen any solution yet. After @devio's answer I tried adding a reference to the SQLite dll. This didn't change anything, but I hope I made it right though.. This is what I added to the root node of the app.config file: <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> <qualifyAssembly partialName="System.Data.SQLite" fullName="System.Data.SQLite, Version=1.0.60.0, Culture=neutral, PublicKeyToken=db937bc2d44ff139" /> </assemblyBinding> </runtime> Anyone out there using Fluent with .Net4 and SQLite successfully? Help! I'm lost...

    Read the article

< Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >