Search Results

Search found 7529 results on 302 pages for 'replace'.

Page 223/302 | < Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >

• Buying an old laser printer -- what will need to be replaced?

  - by marienbad

  Hi all -- as you can see I'm new. I do IT and wiring for a small local shop but I never deal with printers. I do a LOT of printing, and I'd like to stop spending as much money on it. On my local CL, there is an HP 8100DN (duplex network) printer for a very good price (and the toner is a quarter-cent per page). It has printed 200,000 pages and I don't yet know anything else about it. The model was released in 1999. So my questions: What are the parts that tend to need service on laser printers? On ebay, I see fusers, rollers, DC power boards, and motors. What would you expect to replace soon at 200,000 pages? Are there any good "tests" to find out if certain parts are near failure? Do you have anything to say about the HP 8100 specifically? The bottom line for me is that if there's any chance of repairs costing more than $100, it's not worth it for me.

  Read the article

• How do I view source in Outlook 2010?

  - by Martin Duys

  This question has already been asked here; but the answer only gives advice on how to view the email header not the actual html source of the email. There is another question here, which I think may be caused by the same issue as mine, but does not have a satisfactory answer (the answer does not work for the person who posted the question) If I right click on the bottom of an email I can see the option to 'view source' but when I select it nothing happens. I have done a bit of research and came across a post for a much earlier version of Outlook that suggested adding something into the registry. I applied this advice, but it made no difference; but I'm pretty sure that applying this solution correctly for my circumstances will do the trick. When I first received this machine it had a demo version of UltraEdit installed. I uninstalled UltraEdit and installed Notepad++ instead. I am convinced that there is a registry entry that is pointing to UltraEdit as the default view for 'view source' in my email and I need to replace this entry with a reference to Notepad or Notepad++, but I don't know how to do this. Any suggestions?

  Read the article

• Updating files with a Perforce trigger before submit [migrated]

  - by phantom-99w

  I understand that this question has, in essence, already been asked, but that question did not have an unequivocal answer, so please bear with me. Background: In my company, we use Perforce submission numbers as part of our versioning. Regardless of whether this is a correct method or not, that is how things are. Currently, many developers do separate submissions for code and documentation: first the code and then the documentation to update the client-facing docs with what the new version numbers should be. I would like to streamline this process. My thoughts are as follows: create a Perforce trigger (which runs on the server side) which scans the submitted documentation files (such as .txt) for a unique term (such as #####PERFORCE##CHANGELIST##NUMBER###ROFL###LOL###WHATEVER#####) and then replaces it with the value of what the change list would be when submitted. I already know how to determine this value. What I cannot figure out, is how or where to update the files. I have already determined that using the change-content trigger (whether possible or not), which "fire[s] after changelist creation and file transfer, but prior to committing the submit to the database", is the way to go. At this point the files need to exist somewhere on the server. How do I determine the (temporary?) location of these files from within, say, a Python script so that I can update or sed to replace the placeholder value with the intended value? The online documentation for Perforce which I have found so far have not been very explicit on whether this is possible or how the mechanics of a submission at this stage would work.

  Read the article

• install Oracle’s VirtualBox

  - by Shamith c

  I am trying to install Oracle’s VirtualBox. I used sudo dpkg -i virtualbox-4.2_4.2.4-81684\~Ubuntu\~quantal_i386.deb Getting following errors (Reading database ... 226237 files and directories currently installed.) Preparing to replace virtualbox-4.2 4.2.4-81684~Ubuntu~quantal (using virtualbox-4.2_4.2.4-81684~Ubuntu~quantal_i386.deb) ... Unpacking replacement virtualbox-4.2 ... dpkg: dependency problems prevent configuration of virtualbox-4.2: virtualbox-4.2 depends on libc6 (>= 2.15); however: Version of libc6 on system is 2.13-20ubuntu5. virtualbox-4.2 depends on libqtcore4 (>= 4:4.8.0); however: Version of libqtcore4 on system is 4:4.7.4-0ubuntu8.1. virtualbox-4.2 depends on libqtgui4 (>= 4:4.8.0); however: Version of libqtgui4 on system is 4:4.7.4-0ubuntu8.1. dpkg: error processing virtualbox-4.2 (--install): dependency problems - leaving unconfigured Processing triggers for ureadahead ... Processing triggers for shared-mime-info ... How to solve it?

  Read the article

• How to delete removed devices from a mdadm RAID1?

  - by Kabuto

  I had to replace two hard drives in my RAID1. After adding the two new partitions the old ones are still showing up as removed while the new ones are only added as spare. I've had no luck removing the partitions marked as removed. Here's the RAID in question. Note the two devices (0 and 1) with state removed. $ mdadm --detail /dev/md1 mdadm: metadata format 00.90 unknown, ignored. mdadm: metadata format 00.90 unknown, ignored. /dev/md1: Version : 00.90 Creation Time : Thu May 20 12:32:25 2010 Raid Level : raid1 Array Size : 1454645504 (1387.26 GiB 1489.56 GB) Used Dev Size : 1454645504 (1387.26 GiB 1489.56 GB) Raid Devices : 3 Total Devices : 3 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Tue Nov 12 21:30:39 2013 State : clean, degraded Active Devices : 1 Working Devices : 3 Failed Devices : 0 Spare Devices : 2 UUID : 10d7d9be:a8a50b8e:788182fa:2238f1e4 Events : 0.8717546 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 2 8 34 2 active sync /dev/sdc2 3 8 18 - spare /dev/sdb2 4 8 2 - spare /dev/sda2 How do I get rid of these devices and add the new partitions as active RAID devices? Update I seem to have gotten rid of them. My RAID is resyncing, but the two drives are still marked as spares and are number 3 and 4, which looks wrong. I'll have to wait for the resync to finish. All I did was to fix the metadata error by editing my mdadm.conf and rebooting. I tried rebooting before, but this time it worked for whatever reason. Number Major Minor RaidDevice State 3 8 2 0 spare rebuilding /dev/sda2 4 8 18 1 spare rebuilding /dev/sdb2 2 8 34 2 active sync /dev/sdc2

  Read the article

• Group Policy - Published software not upgrading

  - by VokinLoksar

  I'm testing this with mercurial MSIs, but it's the same for other packages. I've created a new group policy and added an old version of mercurial to User software installation as a Published package. On a Windows 7 client I install the package through Programs and Features. The installation works fine. Now, I would like to publish an updated version of mercurial. I create a new Published package. Under 'Upgrades' I configure it to replace (upgrade also doesn't work) the old version and mark this upgrade as 'Required'. The old package is not removed. The Windows 7 client is then restarted. When I log back in, I see a status message saying something like 'Removing managed software Mercurial ...'. There is no message about installation of the upgrade. If I look in Programs and Features, I can see the new version of mercurial listed. However, the actual mercurial directory under Program Files is missing. It's as though the installation recorded information about the MSI, but didn't actually install anything after removing the old version. As I mentioned, this isn't specific to mercurial. I've tried using other apps and have yet to find one that can be upgraded via a Published package. Using Assigned packages in Computer Configuration works without problems, but I would like this software to be optional rather than required. Ideas?

  Read the article

• thought about shared storage (NFS, Lustre) [closed]

  - by user134880

  Possible Duplicate: Can you help me with my capacity planning? Now I habe small cluster with total of 8 nodes. 6 of them are computing nodes (apache and vmware) and 2 nodes are for storage. 2 storage nodes are identical. Each storage server is linux box with 8 x 1Tb WD RE4 in soft raid 10. 1st box is master and 2nd is slave. Data is mirrored with DRDB. We export NFSv4 shares to Apache (for document root) and iSCSI to Vmware. Now all is working pretty good and stable. But it will be soon time to upgrade our system. I have been thinking of Lustre. Does some one has any real experience with Lustre or NFS medium clusters? Will it be good idea just to upgrade server and change hdd's to 3Tb ? With NFS we will always have only 2 servers to maintain (one primary and one slave). Thanks. QUESTIONS: 1) Does some one used Lustre? In production? I have seen a lot of info about how it is hard to setup Lustre because you need to compile own kernel and patches. It's answers from newbies. Is there some one who has used Lustre for some period of time? 2) About disk upgrades - it's only description of strategy. I'm not asking if it is enough 3Tb or not. I just ask if it is right just to replace hdds instead of adding new server (like with Lustre) Thanks again.

  Read the article

• Replacing Failing RAID 1 Drive

  - by mrduclaw

  I hope this is a simple question, but I simply don't know anything about RAID. Some time ago I received a machine that, as I understand it, has two drives in it under RAID 1 (or so that one drive is mirrored on the other and appears as just 1 drive to the OS). Recently, one of these drives has started marking a clicking noise and I would like to replace it. I believe the machine has a hardware RAID controller on the motherboard that handles the RAID stuff, but if it matters the Operating System is Windows XP 32-bit. Is the solution to my problem as simple as buying another drive that is of the same capacity and plugging it in where the clicking drive is currently? Or could I possibly lose everything if the drive that's clicking is the one being mirrored on to the other drive? Is there some menu I need to find before unhooking things? Any best practices out there? I'm sure I'm leaving out some required information, so please just tell me what I'm missing. Thanks!

  Read the article

• User Group Policy in Server 2008 to set Default Profile settings

  - by Chris

  I have computers to deploy and want to apply changes to the default user policy on these PCs automatically. What's the best way to do this? Our current procedure is: Create the computer account in an OU called "Deployment" on our server Unbox the PC Login as the user who will be receiving the PC Change settings (pre-configure outlook, authorize Office, etc.) move computer account to correct OU Place the PC on the users desk. I would like to make as many of the changes in step #4 with Group Policies applied to the Deployment OU if possible since they're largely repeated for every computer. There are a dozen policies created and the computer ones apply correctly but the user policies do not. I understand this is because the end user is not in our "Deployment" OU. I don't want to apply these settings to the user at their current station just the new PC I'm working on. I believe I have the desired effect with Group Policy Loopback Replace enabled on policies that need user policies changed but this just feels wrong/inefficient/complicated to maintain. Am I doing this correctly? Is Group Policy Loopback the only way to change user accounts on one computer? What do you do to setup a user on a new PC?

  Read the article

• (Some) security perms in WinXP corrupted (shows GUID instead of username)

  - by Andy

  I've been using my Win XP machine (part of a domain) over the holiday period, so until yesterday it hadn't rebooted for about five days. I used it yesterday perfectly fine and shut it down. When I switched it on this morning the majority (but not all) of my shortcut links in the Quick Launch toolbar showed as generic file icons. If you open the folder and get properties on one of the failing shortcuts it says ''Target type: This is not a valid shortcut''. Then in Outlook I noticed my signature wasn't showing (I checked my sent folder and the sig was ok yesterday). Checking the signature folder, I can't see the security tab on any of the sig files, and I have an access denied message on trying to open them. I can see the security tab on the signature folder itself, just none of the contents. If I try and use the parent folder's security tab and ''Replace permission entries on all child objects with entries shown here that apply to child objects'' it appears to work fine, but makes no actual difference. I logged in as administrator and saw that the owner of the files showed up as a GUID (clearly should've been my account in its place). Any ideas what might have made that happen? So far I haven't heard any similar complaints from anyone else at the office...

  Read the article

• Copy a harddrive from a failed desktop machine using a second working one.

  - by MrEyes

  Heres the scenario: I have PC-A, an old PC that runs Windows XP but now refuses to boot due to a failed motherboard (or maybe PSU). This PC has a single 80gb IDE drive. I also have PC-B, running Windows Vista, this is working fine. I want to copy all the data off PC-As HDD onto PC-B. To do this I have taken the HDD out of PC-A and connected it as a slave to PC-B. PC-B now boots and sees the additional drive. However, when I attempt to access/copy user folders (i.e. Documents and Settings/[username]/*) I am told that I cannot access the folders due to user permissions. I am doing this under an adminstrator account on PC-B. So the question is, how can I "backup" the data? Preferably without making any changes to the drive contents. The reason for this is that it is possible that PC-A is failing due to a bad PSU, so I intend to replace it before writing off the machine. However I would feel much happier if I had a backup of the data on the HDD.

  Read the article

• Video adapter problem on new motherboard

  - by Dmitriy Matveev

  Something bad happened to my PC several days ago. I wasn't near my PC, so I have no idea about what happened it was just halted. When I tried to boot it was entering infinite loops of a few seconds power up (cpu, hdds, etc) and then power down. I've tried to boot the system with no additional components (that includes hdd, video, network adapters and even memory) connected and that didn't solved the problem, so I've made a decision that most likely it's either some a problem with power unit or with motherboard. I've tried to replace my power unit by another one (which was expected to be working) and the problem didn't resolved again. I've bought a new MB (ASUS P5KPL-AM SE) and tried to get it running with my old CPU and memory (I hope it's still alive). Since this MB include on-board video I've tried to run the PC without installation of mine video. The PC wasn't running and the BIOS was beeping one long signal following by two short (Does it means a video problem?). After that I've installed my video adapter to PCI-E slot and tried to boot the system again and the BIOS was beeping the same. I don't get it. I may expect some problem with CPU and/or memory since I don't know what happened to my PC (maybe some power failure or something different), but not with video and not with on-board video on newly bought MB. How can I understand what's wrong with my system now?

  Read the article

• Accessing or Resetting Permissions of a Mounted Registry Hive of a Different User / From a Different System

  - by Synetech

  I’m currently stuck using my backup system until I can replace my dead motherboard. In the meantime, I have put my hard-drive in this system so that I can access my files and keep working on the backup system. Fortunately, I don’t have a permission issues with the files (the partitions are FAT32). The issue I’m having is with the registry. I need to import some of my settings from the hives of my (old? normal?) installation of Windows into the one I’m currently using. Settings from the system hives (SYSTEM, SOFTWARE, etc.) are fine, but the user hive is giving me trouble. I’ve copied the NTUSER.DAT file from my other drive and mounted it with the reg command. Most of the keys (eg Software) are fine and I can access them without problem, but some of them (particularly the Identities key where Outlook Express settings are stored) complains that it cannot be opened. If I open the permissions dialog, I get an error about being unable to view the current permssions. If I then ignore it and try to take ownership of the key and it’s subkeys, I get an access-denied error. If I then add permissions for my user account on this system, I get an error, however I am then able to see the subkeys and values of the key. If I then try to access the subkeys, I get the same original errors. If I repeat the process for each subkey, I can see their values and subkeys, and so on, but of course this gets to be incredibly annoying and time-consuming (especially since the Identities key has a lot of subkeys). Is there an easier/temporary/more correct way to dump a key so that I can import it into my backup system?

  Read the article

• How to avoid duplicates when copying files that have been renamed at the destination

  - by Benoitt

  I have to get pictures from a folder – with subfolders which are updated automatically – with their extensions. These files have to be copied in a folder where a website based on PHP will edit them (by renaming and creating an XML file) to be downloadable and integrated in an XML feed. Because of the rename function of the script, when I perform the copy gain, all the files are duplicated, because the script has renamed the original ones already. I've tried a few things with rsync but I'm looking for something more powerful because I can't copy files with an external "history". #!/bin/bash find '/home/name/picture' -name '*.jpg' | while read FILE ; do rsync --backup --backup-dir=incremental --suffix=.old "$FILE" /var/www/media ; done wget --spider 'http://myscript.php' ; #exit 0 PS: As a little addition, I'd like to replace '.' with a 'space' just after the *.jpeg copy. My PHP script has some problem to define files with comma because of the extension. I'm finking about a command with find – like I did before – with a sed function? Is that a good idea?

  Read the article

• Can installing Linux or Grub make all of my operating systems slow?

  - by Geore Shg

  I installed Linux Mint 64-bit recently but it freezes up all the time. Not only that, but Grub wouldn't detect Windows. I thought it was just an issue with Linux Mint so I booted into Ubuntu - however that froze up as well. I downloaded Fedora to replace Linux Mint with, but that also freezes up. I finally gave up trying to repair Grub, burning a supergrub grub2 disk and using that to boot into Windows. Windows now freezes up as well. I installed a new copy of Windows on a different drive but to no avail. Right before all this started my computer was running very smoothly. I am wondering if the installation of Linux Mint, the reinstallation of Grub, or me messing with the BIOS (when I was attempting to repair Grub) could have done something drastic enough that everything is slow now? I realize that computers get gradually slower over time, but this was in no way gradual and it happened directly after the installation of Linux Mint. If so, what should I do?

  Read the article

• Graphics card ATI Asus 9250 128 MB AGP problem.Monitor switching off.

  - by Dominick1978

  I have an old system with these specs: Motherboard: Via P4x266a (with AGP 4x) CPU: P4 1,7 Ghz Memory: 1152 MB DDR SDRAM Graphics card: Voodoo 3 2000 16 MB PSU: 300 Watt It also has 1 dvd-rom, 1 dvd-rw, 2 hard drives (all 4 connected via molex) , 1 sounblaster sound card and 1 ethernet card (both connected via pci). OS: XP Pro Recently I bought Asus 9250 128 MB AGP to replace voodoo.Wnen I switch on the pc the initial screens (until after the xp logo) sometimes are distorted with blurred colours.When XP are loaded there is some flickering but the rest are ok.XP can't recognize the card seeing it as just a VGA adapter.I have downloaded the latest xp drivers from ATI website and installed them.Then after the restart everything is ok (no distorted image or blurring) until after the xp logo.After this the monitor turns off while the pc is still running.I have tried many drivers but the problem persists (of course I removed the voodoo drivers before from the display adapter properties).Only once I have managed to enter XP (after changing BIOS features for graphics card from 256 MB to 128 MB) but the drivers on the control panel had an exclamation mark (ati 9250!) and below them ati 9250 secondary without ! under the display adapter tab and the ATI catalyst program said that it couldn;t find the card.That was the opnly time I went beyond the xp logo.Now the monitor auto switcheS off. So, what do you think? 1)Is this a broken card? 2)Is it the drivers of the card? 3)Is it PSU fault? 4)Anything else? Thanks for your help and excuse my english!

  Read the article

• Anyone recommend a program to print multiple HTML files at once for end users?

  - by Keith Bentrup

  I have some clients with multiple html files in folders that are occasionally updated & printed. They would like to be able to print them all at once without having to open each one. I typically do this with a quick command for myself, but I'm unaware of any freeware to do this. After a google search, I'm not finding one, so I'm hoping someone can help. I'd rather not use a script to do this for various security/ease of use/familiarity reasons, I'd rather be able to just point to a simple program they can download and use on their windows desktops. Anyone know of one or some other easy solution to do this? Maybe I'm overlooking the obvious. If anyone's curious, this is what I do for myself (not for my clients): for %h in (*.html) do type "%h" >> all.htm then open all.htm & print. If I need a page break on each doc, I just search and replace in all.htm </body> with <p style="page-break-after:always">&nbsp;</p></body>. It's quick & simple, but too unfamiliar for them. Thanks!

  Read the article

• Exchange 2010 UR3 - customizing OWA logon page

  - by STGdb

  I have an Exchange 2010 UR3 deployment that I need to customize the OWA logon page for. I've created a new LGNTOPL.GIF file to replace the existing one in the folder: “C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\14.3.158.1\themes\resources” When I bring up OWA, I still get the original “Outlook Web App” logo. I’ve searched and found a couple of other instances of LGNTOPL.GIF in the directories: “C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\14.3.123.3\themes\resources” “C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\14.3.146.0\themes\resources” “C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\Current\themes\resources” I’ve replaced the LGNTOPL.GIF file in each of the above directories but got the same results. I’ve tried clearing my browser cache and even using multiple browsers from multiple PC’s but the same results. I’ve even tried making my GIF file the same pixel size as the original LGNTOPL.GIF logo but still the same results. I’ve tried restarting IIS on the CAS server and restarting the server but same results. Has something changed with Exchange 2010 UR3 when trying to customize OWA? I don't see anything documented about any change to OWA customization. Thanks

  Read the article

• netbook screen stays black

  - by sam113101

  I have an acer aspire one netbook. The screen is black but the computer turns on (LED's are on, fan is spinning, etc.) By black I mean absolutely no backlight. I tried to remove the battery and power it on to "discharge" it (I read that on the Internet, not sure if that ever fixes anything), but no luck. I also tried to replace the RAM stick with another one (which I know for sure is working properly), still no luck. I tried to connect an external monitor and switch to it (fn + f5 on this particular model), still no luck, nothing on the external monitor. I read that flashing the BIOS could fix it (http://community.spiceworks.com/how_to/show/22042-acer-aspire-one-black-screen-of-death), I tried to flash it but basically it doesn't do anything when I power it on with the usb thumb drive. No blinking power button. To me it sounds like it might be a dead motherboard, a dead RAM slot (there's only one), or the BIOS thing. I would like to rule out the BIOS possibility, but I need help. The reason I ruled out the dead screen possibility is that it did not switch to the external display when I pressed fn + f5, am I wrong by assuming so? Thank you for your help.

  Read the article

• vi and emacs: comparison? (not flamebait!)

  - by jared

  So, I've been enjoying learning and using vi for the last couple of years. The beauty of vi, for me, is that its UI is a language of movement and action with a very uniform, simple grammar, and which is terse enough that the requisite memorization pays ample dividends in how much more I enjoy working with text (by avoiding boring repetition and eliminating micro-hassles, like that half-second annoying wait while you scroll down the screen). (Note--I don't claim to have expert knowledge of vi, but I get around decently well: comfortable with limited '@' macros and regexp search-and-replace within files; frequently use multiple buffers, tabs, and windows; get around pretty well in the file browser; understand the grammar of actions + movement + subject (as described so aptly in this beautiful SO answer); and had some pretty sweet debugger and ctags integration going with PHP.) I wonder if some emacs folks could take a swing at explaining what emacs does brilliantly, or sum its strengths up in a phrase or two. Spare me the talk about productivity; I'm more interested in conceptual clarity. Lisp-centric answers are okay; I'm learning Scheme on the weekends, and would pick up emacs for that alone (have been using Racket).

  Read the article

• (squid): failed to find or read error text file.

  - by adam

  There is something in our ERR_NO_RELAY that is causing this error to be logged and for the squid process to fail on start up. I can't show you the exact content of the file but I can tell you It has several lines of JavaScript When we remove the JavaScript, the problem goes away. This same file does not cause any issues other 3 instances of squid that we have running internally. All instances of squid came from the same VM images so they should be the same. We are unable to reproduce this issue except on the one box and we are unable to debug more on this box right now because it is running in production. I know these files are interpreted so squid can replace certain values available in the session so it may be that a syntax error caused this issue. That does not explain why we cannot reproduce it on other (virtually the same) images. One difference is that the instance of squid that has the issue was under load when the issue occurred. Any suggestions/insight would be appreciated. thanks!

  Read the article

• htaccess rewriting all subdomains to subdirectories

  - by indorock

  I'm trying to build a catch-all for any subdomains (not captured by previous rewrite rules) for a certain domain, and serve a website from a subdirectory that resides in the same folder as the .htaccess file. I already have my vhosts.conf to send all unmapped requests to a "playground" folder, where I want to easily create new subdomains by simply adding a subfolder. So, my structure looks like this: /var/www/playground |-> /foo |-> /bar The .htacces living inside the /playground folder and /foo and /bar being seperate websites. I want http://foo.domain.com to point to /foo and http://bar.domain.com to /bar. Here is my .htaccess file: RewriteEngine On RewriteCond %{HTTP_HOST} ^([^.]+).domain.com$ [NC] RewriteCond %{REQUEST_URI} !^/%1/(.*) RewriteRule ^(.*) /%1/$1 [L] This is supposed to capture the subdomain, add it as a subfolder in RewriteRule, then append after the slash and path information. The second RewriteCond is there to prevent an infinite loop. My idea was that %1 in the second RewriteCond would be able to capture the capture group in the first RewriteCond. But so far I haven't had any success, it's always ending up in a redirect loop. If I would replace %1 in the second RewriteCond with hardcoded 'foo' or 'bar', it works, which leads me to believe that you cannot refer to a capture group inside a RewriteCond. Is is true? Or am I missing something?

  Read the article

• How can I change the file name of the Program Files (x86) folder?

  - by Madrauk

  Let me stop you before the "you shouldn't do that" and "you will corrupt your file paths". I know what I'm doing, but I'll give you the story to convince you. Basically, my hard drive is failing to the point where programs installed on it are not responding consistently. So, in preparation for my replacement, I'm moving as many files as possible to my secondary because the new drive will be smaller (it's an emergency I can't buy a fancy expensive new drive) and so I can actually use my computer until the new drive comes in. The basic idea behind what I'm doing is I've copied the contents of the Program Files x86 folder to another spot on my other drive, and I want to replace the original folder in the C drive with a symbolic link that points to the other drive, so the programs can run from that drive and be fine but it will save space on my C drive and simplify the moving process when the new one comes in. To do that, I need to rename the program files folder, make the symbolic link, hopefully delete the program files folder, then restart my computer so all the programs are running properly and I can confirm it works. Now that I've told you why, can anyone help me out?

  Read the article

• PCI-E riser card prevents server from starting at all

  - by user68623

  I need to replace the RAID controller in a server, and the new one is PCI Express while the old one was 64bit PCI. The server has both slots, but the riser card that was installed does not contain the PCI Express part. So I bought a new 4x PCI Express riser card (Delock 89103), but the moment I put it into the slot the server does not start up at all. It does not even get to POST, at most the power LED flashed once but nothing else happens at all. It does not power up the server at all. If I remove the riser card it starts up fine. If I put the riser card into a regular desktop computer it seems to work in general. Is there anything else I have to pay attention to when buying a riser card? My naive assumption would be that any PCI Express riser card should work. Or is my riser card likely to be damaged or out-of-spec and the server is just more picky? How do I get it to work, or how can I at least find a riser card that will work with my server? The server mainboard is a Super Micro PDSMi+.

  Read the article

• How do I fix a permissions problem with MS Distributed File System?

  - by charlesrandall

  I have a computer that is new, Windows 7, that is supposed to have access to particular network resources on a Distributed File System. However, despite all permissions being set correctly, I have consistent trouble accessing them. For instance, I'm supposed to be able to reach \company.org\main\subdir. All the permissions have been granted, only when I try to access it by name, it tells me I don't have permission to access \main. This is where the fun starts. If I ping company.org, get the IP, replace company.org by the IP, I can then access \IP\main\subdir without any problems at all. However we have a ton of scripts and build tools that access the network resource by name. My sysadmin has found that using MS's dfsutil.exe, we can fix it temporary using this sequence of commands: C:\dfsutil.exe /pktinfo C:\dfsutil.exe /PktFlush C:\dfsutil.exe /SpcFlush C:\dfsutil.exe /PurgeMupCache C:\dfsutil.exe /pktinfo After that, everything is great... until I reboot, or until some unspecified time later where suddenly I don't have access to \main\ anymore. Hoping to find a more permanent solution than waiting for it to break and running a batch file.

  Read the article

< Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >