Search Results

Search found 104932 results on 4198 pages for 'load user profile'.

Page 224/4198 | < Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >

  • User cannot access a system DSN on Windows Server 2008

    - by Ra Osolage
    We run our SQL Server services using a low privileged domain account. That account is NOT a local admin on the OS. Only access I give the user account is assigned during install of SQL: full control over its mount points and then everything else is granted by the SQL Server 2005/2008 installer. I need to create a linked server in SQL Server 2008 to an ODBC data source. So I remoted into the computer using my domain account, which is part of a group that DOES have local admin privs to the OS. I created a system DSN and configured it to connect to another SQL Server. The DSN works perfectly when I test it. However, when I try to create the linked server, I get an error. It appears to me that the DSN is invisible to the domain account that SQL Server is running as. It seems that this problem is only happening to me on Windows 2008 servers. Does anybody know whether there's anything that you need to do after creating a DSN to make it visible for other users to access?

    Read the article

  • server and user directly connected no pinging...

    - by jtzero
    I have a server(fedora 12) with two nics on it, directly connected to say 192.168.1.0 and 192.168.2.0 the route table looks like this Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 192.168.1.1 255.255.255.0 U 0 0 0 eth0 192.168.2.0 * 255.255.255.0 U 0 0 0 eth1 eth0 = 192.168.1.15 eth1 = 192.168.2.1 and a directly connected user (Mythdora) on the 192.168.2.0 network with ip 192.168.2.2 and route table like so Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.2.0 * 255.255.255.0 U 0 0 0 eth0 the cable is a crossover and it works all three nics work -- connected my laptop to either end and assign it a valid 192.168.2.0 ip the pings will work. In fact if I disconnect the server side and plug the eth cable into the laptop and have thte box ping the laptop continually remove the eth cable and plug it back into the server both sides ping... unfortunately the box realizing it's connected to a different pc wipes its route table after say ten minutes or so. if I do a trace route from a box on the 1.0 network to the servers 192.168.2.1 interface never get a reply from it. as a note at one point I could ping the server from the 192.168.2.2 box but the server couldnt ping the 192.168.2.2 box.

    Read the article

  • not able to register sip user on red5server, using red5phone

    - by sunil221
    I start the red5, and then i start red5phone i try to register sip user , details i provide are username = 999999 password = **** ip = asteriskserverip and i got --- Registering contact -- sip:[email protected]:5072 the right contact could be --- sip :99999@asteriskserverip this is the log: SipUserAgent - listen -> Init... Red5SIP register [SIPUser] register RegisterAgent: Registering contact <sip:[email protected]:5072> (it expires in 3600 secs) RegisterAgent: Registration failure: No response from server. [SIPUser] SIP Registration failure Timeout RegisterAgent: Failed Registration stop try. Red5SIP Client leaving app 1 Red5SIP Client closing client 35C1B495-E084-1651-0C40-559437CAC7E1 Release ports: sip port 5072 audio port 3002 Release port number:5072 Release port number:3002 [SIPUser] close1 [SIPUser] hangup [SIPUser] closeStreams RTMPUser stopStream [SIPUser] unregister RegisterAgent: Unregistering contact <sip:[email protected]:5072> SipUserAgent - hangup -> Init... SipUserAgent - closeMediaApplication -> Init... [SIPUser] provider.halt RegisterAgent: Registration failure: No response from server. [SIPUser] SIP Registration failure Timeout please let me know if i am doing anything wrong. regards Sunil

    Read the article

  • Grant HTTP access based on unix user group

    - by Sander Marechal
    Is it possible to grant network access or HTTP access based on a user's group? At my company we want to set up an internal composer server using Satis to manage packages for the projects we write (e.g. on repository.mycompany.com), with the packages themselves in our SVN server (svn.mycompany.com). We have several webservers with many different users on them. Some users should be able to reach the composer and SVN server. Some should not. Users that should be able to reach these servers all belong to the same group. How can I set up Apache on the Composer and SVN server to only grant access to those users in that group? Alternatively, can I set up the webservers in such a way that only users from that group are able to make a connection to our Composer and SVN servers? The best thing we have come up with so far is using SSL client certificates. We simply place a client certificate on all servers which can be used to access Composer and SVN. Only the right usergroup will have read access to the certificate. A bit clunky but it may work. But I'm looking for something better.

    Read the article

  • The Network folder specified is currently mapped using a different user name and password

    - by Frank Thornton
    I have a NAS device, it has 3 shares. On one computer I have access to all 3 of the shares. On another computer I keep getting this error when try and add a 2nd one. The Network folder specified is currently mapped using a different user name and password [...] That is the message I keep getting. What causes that? EDIT: Every share has it's own username and password. EDIT: NET USE on the one running 3 from the same NAS device New connections will be remembered. Status Local Remote Network ------------------------------------------------------------------------------- OK T: \\192.168.2.5\SHARE1 Microsoft Windows Network OK X: \\Nas-1dsho-abc\SHARE2 Microsoft Windows Network Disconnected Y: \\192.168.2.9\backups Microsoft Windows Network OK Z: \\Nas-1dsho-abc\cbackups Microsoft Windows Network The command completed successfully. NET USE on the other: New connections will be remembered. Status Local Remote Network ------------------------------------------------------------------------------- OK Y: \\192.168.2.5\SHARE1 Microsoft Windows Network Unavailable Z: \\192.168.2.5\SHARE2 Microsoft Windows Network The command completed successfully.

    Read the article

  • Linux: Send mail to external mail box from a server with that user's hostname

    - by dtbarne
    I've got sendmail running on a linux box. Let's say the hostname of the box is bar.com. If I run the following command, I don't receive the email (which is hosted with a third party), presumably due to the hostname pointing to the local machine. echo "Test Body" | mail -s "Test Subject" [email protected] Is there any way to get this to work so that I can receive emails at my third party email address even though it has the same hostname? Do I have to change the hostname of this server (not preferred)? It may be worth noting that I created a user "foo" on my machine and noticed that the mailbox for that account is empty. I noticed these log entries, which may or may not be relevant: Jun 28 01:09:48 bar sendmail[14338]: p5S59min014338: from=apache, size=80, class=0, nrcpts=1, msgid=<[email protected]>, relay=apache@localhost Jun 28 01:09:48 bar sendmail[14339]: p5S59mIA014339: from=<[email protected]>, size=293, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA, relay=localhost.localdomain [127.0.$ Jun 28 01:09:48 bar sendmail[14338]: p5S59min014338: [email protected], ctladdr=apache (48/48), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30080, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (p5S59mIA$ Jun 28 01:09:48 bar sendmail[14340]: p5S59mIA014339: to=<[email protected]>, ctladdr=<[email protected]> (48/48), delay=00:00:00, xdelay=00:00:00, mailer=local, pri=30495, dsn=2.0.0, stat=Sent

    Read the article

  • User http does not have write permissions directory?

    - by dwieeb
    I have a bit of an odd set up, I think. I have groups for each domain my server hosts, and I add the user http to each domain group along with the users that should have access to the groups' domains. In my php script running from a directory 'public_html', I try creating a file: <?php $output = ""; print exec('touch test 2>&1', $output); But I get touch: cannot touch `test': Permission denied and the file is not created. But here, clearly stated, the group has all permissions on the directory: drwxrwxr-x 5 dwieeb example.com 1024 Feb 4 05:19 public_html And here are the permissions on the php file in public_html that is trying to use the exec function: -rw-rw-r-- 1 dwieeb example.com 59 Feb 4 05:19 test.php How is this possible if http is part of the example.com group (as seen from a cat on /etc/group) and the directory has full permissions for the group? ... example.com:x:1000:dwieeb,http I'm stumped. EDIT (since apparently I'm not cool enough to answer my own questions yet): Ah, I found the problem. Yes, I restarted Nginx, but the php-fpm daemon must be restarted as well when http is added to the group for my domain. On Arch Linux: rc.d restart php-fpm

    Read the article

  • ActiveDirectory user files aren't being shared? [on hold]

    - by Ryan
    I'm taking a class in college and my current project is to setup Active Directory. So I have two VMs, one is Windows Server 2008 R2 and the other is Windows 7. I setup the domain team15.net (this is the FQDN for the forest) on the W2008 server machine. And then I connected the Windows 7 machine to the team15.net domain, and now I can login to the administrator account on the W2008 machine by using TEAM15\Administrator for the username. However, any files that I add in Windows 7 while logged into TEAM15\Administrator are NOT shown in the Windows 2008 machine. Is this normal? It seems like any files I add to this user in the domain only exists for the machine that I'm currently using. Is it possible to change this so all files for all users are synced to all computers in the domain? If not then what are alternatives? I noticed that back in high school we also used domains but there was a shared drive E:\ that you had to store your files because if you put them on in the desktop instead then they would suddenly disappear once you logged out and back in. How can I setup a shared drive? and which computer would provide the storage for this drive?

    Read the article

  • tmpreaper, --protect and a non-root user

    - by nsg
    Hi, I'm a little confused. I have a download directory that I want to remove all files older then 30 days with tmpreaper. Just one problem, the directory in question is a separate partition with a lost+found directory, of course I need to keep it so I added --protect 'lost+found', the problem is that tmpreaper outputs: error: chdir() to directory 'lost+found' (inode 11) failed: Permission denied (PID 30604) Back from recursing down `lost+found'. Entry matching `--protect' pattern skipped. `lost+found' I have tried with other pattern like lost* and so on... I'm running tmpreaper as a non-root user because there is no reason for superuser privileges because I own all files (except lost+found). Are I'm forced to run tmpreaper as root? Or are my shell-skills not as good as I thought? I guess the problem is: tmpreaper will chdir(2) into each of the directories you've specified for cleanup, and check for files matching the <shell_pattern> there. It then builds a list of them, and uses that to protect them from removal. Any thought and/or advice? Edit: The command I'm trying to run is something like $ /usr/sbin/tmpreaper -t --protect 'lost+found' 30d /mydir 1> /dev/null error: chdir() to directory `lost+found' (inode 11) failed: Permission denied Edit 2: I read the source code for tmpreaper-1.6.13 and found this if (safe_chdir (dirname)) exit(1); and if (chdir (dirname)) { message (LOG_ERROR, "chdir() to directory `%s' (inode %lu) failed: %s\n", dirname, (u_long) sb1.st_ino, strerror (errno)); return 1; } So it seems tmpreaper needs to be able to chdir in to all directories, ignored or not. I see two options left Run tmpreaper as root Move the download directory Find a alternative tool (tmpwatch?) I will give it some more research before i make a choice.

    Read the article

  • Login failed for user 'XXX' on the mirrored sql server

    - by hp17
    Hello, We have 4 web servers that host our asp.net (3.5) application. Randomly, we get error messages like : 1) "Login failed for user 'userid'" 2) "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)" we are running sql2005 and have a principle and a mirror db (sync). When these exceptions are thrown, I look at the SQL error logs on the mirrored db and noticed the failed login messages in there. The principle db is running fine and the other web apps are working great. this will happen for maybe 10 min, then the app pool recycles and it starts hitting the principle db again. Is there a configuration I have incorrect? my theory is that our principle db is forwarding the request to the mirror, but that should never happen. any help??

    Read the article

  • Moving web files to /home/user/ gives permission denied using apache

    - by Maaz
    I recently created some linux users on my machine and their respective directories were created in the following manner /home/my_user so I decided to treat each user as one of my websites. I moved all my website files over to this directory like so /home/my_user/public_html/. I edited the virtual host in my httpd.conf and changed the root directory folder so this is how that looks <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "/home/my_user/public_html" ServerName mywebsite.com ServerAlias www.mywebsite.com ErrorLog "/var/log/httpd/mywebsite/error_log" CustomLog "/var/log/httpd/mywebsite/access_log" common </VirtualHost> Now this virtual host configuration was working perfectly fine with my older document root path that was located at /var/www/html/mywebsite/public_html but after changing that to what it is right now, I am getting a permission denied error. But I followed the instructions here: http://stackoverflow.com/questions/14427808/you-dont-have-permission-error-in-apache-in-centos Even after following the above instructions, when I run the following command: sudo -u apache ls /home/my_user/public_html The server responds with ls: cannot open directory /home/my_user/public_html: Permission denied Even so, I do not get a permissions denied error when I try to access my site any more, however, now I am redirected to the default page of apache instead of my website. I am not exactly sure what's wrong any more, if anyone has an idea, it would be great if you guys could help out!

    Read the article

  • Which revision control system for single user

    - by G. Bach
    I'm looking to set up a revision control system with me as a single user. I'd like to have access (read and write) protected using SSL, little overhead, and preferrably a simple setup. I'm looking to do this on my own server, so I don't want to use the option of registering with some professional provider of such a service (I like having direct control over my data; also, I'd like to know how to set up something like that). As far as I'm aware, what kind of project I want to subject to revision control doesn't really matter, but just for completeness' sake, I'm planning on using this for Java project, some html/css/php stuff, and in the future possibly as a synchronizing tool for small data bases (ignore that later one if it doesn't fit in with the paradigm of revision control). My questions primarily arise from the fact that I only ever used Subversion from Eclipse, so I don't have thorough knowledge of what's out there, what fits better for which needs, etc. So far I've heard of Subversion, Git, Mercurial, but I'm open to any system that's widely used and well supported. My server is running Ubuntu 11.10. Which system should I choose, what are the advantages of the respective systems, and if you know of any particularly useful ones, are there tutorials regarding the setup of the system I should choose that you could recommend?

    Read the article

  • Linux: Send mail to external mail box from a server with that user's hostname

    - by dtbarne
    I've got sendmail running on a linux box. Let's say the hostname of the box is bar.com. If I run the following command, I don't receive the email (which is hosted with a third party), presumably due to the hostname pointing to the local machine. echo "Test Body" | mail -s "Test Subject" [email protected] Is there any way to get this to work so that I can receive emails at my third party email address even though it has the same hostname? Do I have to change the hostname of this server (not preferred)? It may be worth noting that I created a user "foo" on my machine and noticed that the mailbox for that account is empty. I noticed these log entries, which may or may not be relevant: Jun 28 01:09:48 bar sendmail[14338]: p5S59min014338: from=apache, size=80, class=0, nrcpts=1, msgid=<[email protected]>, relay=apache@localhost Jun 28 01:09:48 bar sendmail[14339]: p5S59mIA014339: from=<[email protected]>, size=293, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA, relay=localhost.localdomain [127.0.$ Jun 28 01:09:48 bar sendmail[14338]: p5S59min014338: [email protected], ctladdr=apache (48/48), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30080, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (p5S59mIA$ Jun 28 01:09:48 bar sendmail[14340]: p5S59mIA014339: to=<[email protected]>, ctladdr=<[email protected]> (48/48), delay=00:00:00, xdelay=00:00:00, mailer=local, pri=30495, dsn=2.0.0, stat=Sent

    Read the article

  • Linux NFS create mask and force user equivalent

    - by Mike
    I have two Linux servers: fileserver Debian 5.0.3 (2.6.26-2-686) Samba version 3.4.2 apache Ubuntu 10.04 LTS (2.6.32-23-generic) Apache 2.2.14 I have a number of Samba shares on fileserver so that I can access files from Windows PCs. I am also exporting /data/www-data to the apache server, where I have it mounted as /var/www. The setup is okay, except for when I come to create files on the NFS mount. I end up with files that cannot be read by Apache, or which cannot be modified by other users on my system. With Samba, I can specify force user, force group, create mask and directory mask, and this ensures that all files are created with suitable permissions for my Apache web server. I can't find a way to do this with NFS. Is there a way to force permissions and ownership with NFS - am I missing something obvious? Although I've spent quite a bit of time with Linux, and am weaning myself off Windows, I still haven't quite got to grip with Linux permissions... If this is not the right way to do things, I am open to alternative suggestions.

    Read the article

  • Exchange emails not delivering for one user

    - by Cylindric
    We have an Exchange infrastructure going through a migration from 2003 SP2 (call it ExOld) to 2010 (ExNew). All users are now on the new server, but mail is still being directed to ExOld until testing is complete. ExNew sends emails directly to the internet. For one particular user, emails don't seem to be being reliably delivered, but the odd thing is that it's not all emails. I can see external emails in his inbox. If I send an internal email it works fine. If I send an email from Gmail to him it doesn't get through. If I telnet from outside to ExOld I can send an email to him. If I telnet from outside to ExNew I can send an email to him. This is a transcript that results in a successful send: 220 ExOldName Microsoft ESMTP MAIL Service, Version: 6.0.3790.4675 ready at Mon, 22 Oct 2012 10:55:26 +0100 EHLO test.com 500 5.3.3 Unrecognized command EHLO test.com 250-ExOldFQDN Hello [MyTestExternalIp] 250-TURN 250-SIZE 250-ETRN 250-PIPELINING 250-DSN 250-ENHANCEDSTATUSCODES 250-8bitmime 250-BINARYMIME 250-CHUNKING 250-VRFY 250-X-EXPS GSSAPI NTLM LOGIN 250-X-EXPS=LOGIN 250-AUTH GSSAPI NTLM LOGIN 250-AUTH=LOGIN 250-X-LINK2STATE 250-XEXCH50 250 OK MAIL FROM:[email protected] 250 2.1.0 [email protected] OK RCPT TO:[email protected] notify=success,failure 250 2.1.5 [email protected] DATA 354 Start mail input; end with . Subject:Test 1056 Test 10:56 . 250 2.6.0 Queued mail for delivery quit 221 2.0.0 ExOldFQDN Service closing transmission channel Emails go through Symantec Cloud, but their "Track and Trace" shows the messages going through, with a "delivered ok" log entry. 2012-10-22 09:19:56 Connection from: 209.85.212.171 (mail-wi0-f171.google.com) 2012-10-22 09:19:56 Sending server HELO string:mail-wi0-f171.google.com 2012-10-22 09:19:56 Message id:CAE5-_4hzGpY2kXFbzxu7gzEUSj5BAvi+BB5q1Gjb6UUOXOWT3g@mail.gmail.com 2012-10-22 09:19:56 Message reference: 135089759500000177171130001194006 2012-10-22 09:19:56 Sender: [email protected] 2012-10-22 09:19:56 Recipient: [email protected] 2012-10-22 09:20:26 SMTP Status: OK 2012-10-22 09:19:56 Delivery attempt #1 (final) 2012-10-22 09:19:56 Recipient server: ExOldIP (ExOldIP) 2012-10-22 09:19:56 Response: 250 2.6.0 Queued mail for delivery I'm not sure where to look on the old (or new) server for information as to where the mails are ending up.

    Read the article

  • Run as another user, but also as administrator

    - by Tewr
    I am trying to debug a virtual machine (VM) running on a remote computer from my workstation (A). Both VM and A are running Windows 7 Enterprise. Apparently, I need to start the Remote Debugger Service (RDS) on VM as an administrator. Apparently, I also need to run RDS as the user Tewr logged in on A (domain: DOM). VM runs the services i need to debug, as well as the remote desktop interface with an account VMUSER in a domain called VMDOMAIN. I manage to start RDS as administrator, but then the RDS process is owned by VMUSER and that's not good enough. I also manage to run RDS as DOM\Tewr, but then not as an administrator. I have Added DOM\Tewr as an administrator on VM, but thats not good enough becuase the process is still not run as administrator. How can I run the RDS process as DOM\Tewr and "As Administrator", while logged on in windows as VMDOMAIN\VM? (note: I have tried creating an account with the same credentials / password as VMUSER, as hinted in the ms article above, but with no luck...)

    Read the article

  • Determine which user initiated call in Asterisk

    - by adaptive
    I had the following code in my extensions.conf file: [local] exten => _NXXNXXXXXX,1,Set(CALLERID(name)=${OUTGOING_NAME}) exten => _NXXNXXXXXX,n,Set(CALLERID(num)=${OUTGOING_NUMBER}) Now I want to change this code to set the CallerID and number based on the user/extension that is making the call. In fact I have four(4) users/extensions in my sip.conf and only one of them (the one I use for business) is supposed to send a different caller id/number. Everything is in the same context (for simplicity) since all lines need to be able to pick up an incoming call. The only difference is when line1 needs to make a call, it has to send a different caller id/number and use a different provider. This is what I have so far: [local] exten => _NXXNXXXXXX,1,Set(line=${SIP_HEADER(From)}) exten => _NXXNXXXXXX,n,Verbose(line variable is <${line}>) exten => _NXXNXXXXXX,n,Set(CALLERID(name)=${IF($[ ${line} = line1 ]?${COMPANY_NAME}:${FAMILY_NAME})}) exten => _NXXNXXXXXX,n,Set(CALLERID(num)=${IF($[ ${line} = line1 ]?${COMPANY_NUMBER}:${FAMILY_NUMBER})}) exten => _NXXNXXXXXX,n,Dial(${IF($[ ${line} = line1]?SIP/${EXTEN}@${COMPANY_PROVIDER}:SIP/${EXTEN}@${FAMILY_PROVIDER})}) I really don't know if this is correct and I'm afraid to commit these changes to my extensions.conf before validating. Any help will be greatly appreciated.

    Read the article

  • Android - How do I load a contact Photo?

    - by PaulH
    I'm having trouble loading a photo for a contact in Android. I've googled for an answer, but so far have come up empty. Does anyone have an example of querying for a Contact, then loading the Photo? So, given a contactUri which comes from an Activity result called using startActivityForResult(new Intent(Intent.ACTION_PICK,ContactsContract.CommonDataKinds.Phone.CONTENT_URI),PICK_CONTACT_REQUEST) is: content://com.android.contacts/data/1557 The loadContact(..) works fine. However when I call the getPhoto(...) method, I get a null value for the photo InputStream. It is also confusing because the URI values are different. The contactPhotoUri evaluates to: content://com.android.contacts/contacts/1557 See the comments inline in the code below. class ContactAccessor { /** * Retrieves the contact information. */ public ContactInfo loadContact(ContentResolver contentResolver, Uri contactUri) { //contactUri --> content://com.android.contacts/data/1557 ContactInfo contactInfo = new ContactInfo(); // Load the display name for the specified person Cursor cursor = contentResolver.query(contactUri, new String[]{Contacts._ID, Contacts.DISPLAY_NAME, Phone.NUMBER, Contacts.PHOTO_ID}, null, null, null); try { if (cursor.moveToFirst()) { contactInfo.setId(cursor.getLong(0)); contactInfo.setDisplayName(cursor.getString(1)); contactInfo.setPhoneNumber(cursor.getString(2)); } } finally { cursor.close(); } return contactInfo; // <-- returns info for contact } public Bitmap getPhoto(ContentResolver contentResolver, Long contactId) { Uri contactPhotoUri = ContentUris.withAppendedId(Contacts.CONTENT_URI, contactId); // contactPhotoUri --> content://com.android.contacts/contacts/1557 InputStream photoDataStream = Contacts.openContactPhotoInputStream(contentResolver,contactPhotoUri); // <-- always null Bitmap photo = BitmapFactory.decodeStream(photoDataStream); return photo; } public class ContactInfo { private long id; private String displayName; private String phoneNumber; private Uri photoUri; public void setDisplayName(String displayName) { this.displayName = displayName; } public String getDisplayName() { return displayName; } public void setPhoneNumber(String phoneNumber) { this.phoneNumber = phoneNumber; } public String getPhoneNumber() { return phoneNumber; } public Uri getPhotoUri() { return this.photoUri; } public void setPhotoUri(Uri photoUri) { this.photoUri = photoUri; } public long getId() { return this.id; } public void setId(long id) { this.id = id; } } } Clearly, I'm doing something wrong here, but I can't seem to figure out what the problem is. Thanks.

    Read the article

  • Failed to load viewstate

    - by Jen
    OK have just started getting this error and I'm not sure why. I have a hosting page which has listview and a panel with a usercontrol. The listview loads up records with a linkbutton. You click the link button to edit that particular record - which gets loaded up in the formview (within the usercontrol) which goes to edit mode. After an update occurs in the formview I'm triggering an event which my hosting page is listening for. The hosting page then rebinds the listview to show the updated data. So this all works - but when I then go to click on a different linkbutton I get the below error: Webpage error details User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.3) Timestamp: Fri, 18 Jun 2010 03:15:54 UTC Message: Sys.WebForms.PageRequestManagerServerErrorException: Failed to load viewstate. The control tree into which viewstate is being loaded must match the control tree that was used to save viewstate during the previous request. For example, when adding controls dynamically, the controls added during a post-back must match the type and position of the controls added during the initial request. Line: 4723 Char: 21 Code: 0 URI: http://localhost:1951/AdminWebSite/ScriptResource.axd?d=yfdLw4zYs0bqYqs1arL-htap1ceeKCyW1EXhrhMZy_AqJ36FUpx8b2pzMKL6V7ebYsgJDVm_sZ_ykV1hNtFqgYcJCLLtardHm9-yyA7zC4k1&t=ffffffffec2d9970 Any suggestions as to what is actually wrong?? My event listener does this: protected void RatesEditDate1_EditDateRateUpdated() { if (IsDateRangeValid(txtDisplayFrom, txtDisplayTo)) { PropertyAccommodationRates1.DataBind(); } else { pnlViewAccommodationRates.Visible = false; } divEditRate.Visible = false; } When I click my link button - it should be hitting this but the second time round it errors before hitting the breakpoint: protected void RatesEditDate1_EditDateRateSelected(DateTime theDateTime) { // make sure everything else is invisible pnlAddAccommodation.Visible = false; pnlViewEditAccommodations.Visible = false; RatesEditDate1.TheDateTime = theDateTime; RatesEditDate1.PropertyID = (int)Master.PropertyId; if (!String.IsNullOrEmpty(Accommodations1.SelectedValue)) { RatesEditDate1.AccommodationTypeID = Convert.ToInt32(Accommodations1.SelectedValue); } else { RatesEditDate1.AccommodationTypeID = 0; } divEditRate.Visible = true; } So my listview appears to be being rebound successfully - I can see my changed data.. I just don't know why its complaining about viewstate when I click on the linkbutton. Or is there a better way to update the data in my listview? My listview and formview are bound to objectdata sources (in case that matters) Thanks for the help!

    Read the article

  • Eclipse Dynamic Web Project fails to load under WTP

    - by Cue
    When trying to run an Eclipse Dynamic Web Project under a Tomcat setup using WTP, it fails with the attached stacktrace. Checklist At the project properties, under "Java EE Module Dependencies" I have checked the "Maven Dependencies" At the wtp deploy directory, under lib indeed all dependencies are present (esp. struts-taglib-1.3.10.jar) On the other hand, if I package with maven and copy the war file under the webapps directory everything is working as normal. Specification Eclipse JEE Galileo SR2 (with WTP 3.1.1) Tomcat 6.0.26 Java(TM) SE Runtime Environment (build 1.6.0_17-b04-248-10M3025) Java HotSpot(TM) 64-Bit Server VM (build 14.3-b01-101, mixed mode) stacktrace org.apache.jasper.JasperException: Unable to read TLD "META-INF/tld/struts-html-el.tld" from JAR file "file:/Users/cue/Development/workspace/eclipse/.metadata/.plugins/org.eclipse.wst.server.core/tmp2/wtpwebapps/ticketing/WEB-INF/lib/struts-el-1.3.10.jar": org.apache.jasper.JasperException: Failed to load or instantiate TagExtraInfo class: org.apache.struts.taglib.html.MessagesTei at org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:51) at org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:409) at org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:181) at org.apache.jasper.compiler.TagLibraryInfoImpl.<init>(TagLibraryInfoImpl.java:182) at org.apache.jasper.compiler.Parser.parseTaglibDirective(Parser.java:383) at org.apache.jasper.compiler.Parser.parseDirective(Parser.java:446) at org.apache.jasper.compiler.Parser.parseElements(Parser.java:1393) at org.apache.jasper.compiler.Parser.parse(Parser.java:130) at org.apache.jasper.compiler.ParserController.doParse(ParserController.java:255) at org.apache.jasper.compiler.ParserController.parse(ParserController.java:103) at org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:185) at org.apache.jasper.compiler.Compiler.compile(Compiler.java:347) at org.apache.jasper.compiler.Compiler.compile(Compiler.java:327) at org.apache.jasper.compiler.Compiler.compile(Compiler.java:314) at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:589) at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317) at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:313) at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:260) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:852) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489) at java.lang.Thread.run(Thread.java:637)

    Read the article

  • flash.display.Loader blocks on load in release build

    - by Anders
    I'm loading a swf-file from my program written in as3 using the flash.display.Loader class. When I'm using the debug build configuration in FlashDevelop everything works fine. But when I'm using the release build configuration the program freezes for around two seconds efter the loader sends the progress events and before sending the complete event. This is my program: package { import flash.display.Loader; import flash.display.Sprite; import flash.events.Event; import flash.events.ProgressEvent; import flash.net.URLRequest; import flash.system.LoaderContext; import flash.system.ApplicationDomain; import flash.text.TextField; public class Main extends Sprite { private var frameCounter:int; private var frameCounterField:TextField = new TextField; private var statusField:TextField = new TextField; function Main():void { if (stage) init(); else addEventListener(Event.ADDED_TO_STAGE, init); } private function init(e:Event = null):void { removeEventListener(Event.ADDED_TO_STAGE, init); addEventListener(Event.ENTER_FRAME, frame); frameCounterField.text = "On frame " + frameCounter.toString(); addChild(frameCounterField); statusField.y = 40; statusField.width = 300; addChild(statusField); var context:LoaderContext = new LoaderContext(false, ApplicationDomain.currentDomain, null); var urlReq:URLRequest = new URLRequest("SomeFile.swf"); var loader:Loader = new Loader(); loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, onProgress); loader.contentLoaderInfo.addEventListener(Event.COMPLETE, onComplete); loader.load(urlReq, context); } private function frame(event:Event):void { frameCounterField.text = "On frame " + (++frameCounter).toString(); } private function onProgress(event:ProgressEvent):void { statusField.appendText("Progress on frame: " + frameCounter.toString() + " Loaded: " + event.bytesLoaded + " / " + event.bytesTotal + "\n"); } private function onComplete(event:Event):void { statusField.appendText("Completed on frame: " + frameCounter.toString() + "\n"); } } } In release I get the following output on the first frame: On frame 1 Progress on frame: 1 Loaded: 0 / 182468 Progress on frame: 1 Loaded: 65536 / 182468 Progress on frame: 1 Loaded: 131072 / 182468 Progress on frame: 1 Loaded: 182468 / 182468 After around two seconds where the program is frozen the line Completed on frame: 2 is added and the 'On frame X' counter starts ticking up. Debug build produces the same output but without the freeze. Not all swf-files I have tried loading triggers the problem. The size of the file doesn't seem to affect anything. I have tried compiling and running on another computer with the same result. What could cause this problem?

    Read the article

  • How to load entities into private collections using the entity framework

    - by Anton P
    I have a POCO domain model which is wired up to the entity framework using the new ObjectContext class. public class Product { private ICollection<Photo> _photos; public Product() { _photos = new Collection<Photo>(); } public int Id { get; set; } public string Name { get; set; } public virtual IEnumerable<Photo> Photos { get { return _photos; } } public void AddPhoto(Photo photo) { //Some biz logic //... _photos.Add(photo); } } In the above example i have set the Photos collection type to IEnumerable as this will make it read only. The only way to add/remove photos is through the public methods. The problem with this is that the Entity Framework cannot load the Photo entities into the IEnumerable collection as it's not of type ICollection. By changing the type to ICollection will allow callers to call the Add mentod on the collection itself which is not good. What are my options? Edit: I could refactor the code so it does not expose a public property for Photos: public class Product { public Product() { Photos = new Collection<Photo>(); } public int Id { get; set; } public string Name { get; set; } private Collection<Photo> Photos {get; set; } public IEnumerable<Photo> GetPhotos() { return Photos; } public void AddPhoto(Photo photo) { //Some biz logic //... Photos.Add(photo); } } And use the GetPhotos() to return the collection. The other problem with the approach is that I will loose the change tracking abilities as I cannot mark the collection as Virtual - It is not possible to mark a property as private virtual. In NHibernate I believe it's possible to map the proxy class to the private collection via configuration. I hope that this will become a feature of EF4. Currently i don't like the inability to have any control over the collection!

    Read the article

  • Codeigniter initializing multiple times per page load

    - by Clayton
    I'm using Codeigniter for my application and have something wrong with my configuration. When I load a page, the framework initializes several times (see logs below). I have built other applications with Codeigniter and have never seen this behavior before. Log output: DEBUG - 2010-03-27 14:50:32 --> Config Class Initialized DEBUG - 2010-03-27 14:50:32 --> Hooks Class Initialized DEBUG - 2010-03-27 14:50:32 --> URI Class Initialized DEBUG - 2010-03-27 14:50:32 --> Router Class Initialized DEBUG - 2010-03-27 14:50:32 --> Output Class Initialized DEBUG - 2010-03-27 14:50:32 --> Input Class Initialized DEBUG - 2010-03-27 14:50:32 --> XSS Filtering completed DEBUG - 2010-03-27 14:50:32 --> XSS Filtering completed DEBUG - 2010-03-27 14:50:32 --> XSS Filtering completed DEBUG - 2010-03-27 14:50:32 --> XSS Filtering completed DEBUG - 2010-03-27 14:50:32 --> Global POST and COOKIE data sanitized DEBUG - 2010-03-27 14:50:32 --> Language Class Initialized DEBUG - 2010-03-27 14:50:32 --> Loader Class Initialized DEBUG - 2010-03-27 14:50:32 --> Config file loaded: config/redux_auth.php DEBUG - 2010-03-27 14:50:32 --> Config file loaded: config/email.php DEBUG - 2010-03-27 14:50:32 --> Helper loaded: url_helper DEBUG - 2010-03-27 14:50:32 --> Helper loaded: form_helper DEBUG - 2010-03-27 14:50:32 --> Helper loaded: html_helper DEBUG - 2010-03-27 14:50:32 --> Database Driver Class Initialized DEBUG - 2010-03-27 14:50:32 --> Session Class Initialized DEBUG - 2010-03-27 14:50:32 --> Helper loaded: string_helper DEBUG - 2010-03-27 14:50:32 --> Helper loaded: file_helper DEBUG - 2010-03-27 14:50:32 --> Session routines successfully run DEBUG - 2010-03-27 14:50:32 --> Form Validation Class Initialized DEBUG - 2010-03-27 14:50:32 --> Model Class Initialized DEBUG - 2010-03-27 14:50:32 --> Controller Class Initialized DEBUG - 2010-03-27 14:50:32 --> Language file loaded: language/english/form_validation_lang.php DEBUG - 2010-03-27 14:50:32 --> XSS Filtering completed DEBUG - 2010-03-27 14:50:32 --> XSS Filtering completed DEBUG - 2010-03-27 14:50:32 --> Config Class Initialized DEBUG - 2010-03-27 14:50:32 --> Hooks Class Initialized DEBUG - 2010-03-27 14:50:32 --> URI Class Initialized DEBUG - 2010-03-27 14:50:32 --> Router Class Initialized DEBUG - 2010-03-27 14:50:32 --> Output Class Initialized DEBUG - 2010-03-27 14:50:32 --> Input Class Initialized DEBUG - 2010-03-27 14:50:32 --> XSS Filtering completed DEBUG - 2010-03-27 14:50:32 --> Global POST and COOKIE data sanitized DEBUG - 2010-03-27 14:50:32 --> Language Class Initialized DEBUG - 2010-03-27 14:50:32 --> Loader Class Initialized ... This repeats three more times

    Read the article

  • UITableViewCell outlets not set during bundle load (possibly very elementary question)

    - by Jan Zich
    What are the most common reasons for an outlet (a class property) not being set during a bundle load? I'm sorry; most likely I'm not using the correct terms. It's my first steps with iPhone OS development and Objective-C, so please bear with me. Here is more details. Basically, I'm trying to create a table view based form with a fixed number of static rows. I followed this example: http://developer.apple.com/iphone/library/documentation/userexperience/conceptual/TableView_iPhone/TableViewCells/TableViewCells.html Scroll down to The Technique for Static Row Content please. I have one nib file with one table view, three table cells and all connections set as in the example. The problem is that the corresponding cell properties in my controller are never initialised. I get an exception in cellForRowAtIndexPath complaining that the returned cell is nil: UITableView dataSource must return a cell from tableView:cellForRowAtIndexPath. Here are the relevant parts from the implementation of the controller: @synthesize cellA; @synthesize cellB; @synthesize cellC; - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { return 1; } - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { return 3; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { switch (indexPath.row) { case 0: return cellA; break; case 1: return cellB; break; case 2: return cellC; break; default: return nil; } } And here is the interface part: @interface AssociatePhoneViewController : UITableViewController { UITableViewCell *cellA; UITableViewCell *cellB; UITableViewCell *cellB; } @property (nonatomic, retain) IBOutlet UITableViewCell *cellA; @property (nonatomic, retain) IBOutlet UITableViewCell *cellB; @property (nonatomic, retain) IBOutlet UITableViewCell *cellC; @end This must be possibly one of the the most embarrassing questions on StackOverflow. It looks like the most basic example code. Is is possible that the cells are not instantiated with the nib file? I have them on the same level before the tabula view in the nib file. I tried to move them after the table view, but it did not make any difference. Are table cells in some way special? Do I need to set some flag or some property on them in the nib file? I was under the impression that all classes (views, windows, controllers …) listed in a nib file are simply instantiated (and linked using the provided connections). Could it possibly be some memory issue? The cell properties in my controller are not defined in any special way.

    Read the article

  • User Getting Logged Out After Making First Comment

    - by John
    Hello, I am using a login system that works well. I am also using a comment system. The comment function does not show up unless the user is logged in (as shown in commentformonoff.php below). When a user makes a comment, the info is passed from the function "show_commentbox" to the file comments2a.php. Then, the info is passed to the file comments2.php. When the site is first pulled up on a browser, after logging in and making a comment, the user is logged out. After logging in a second time during the same browser session, the user is no longer logged out after making a comment. How can I keep the user logged in after making the first comment? Thanks in advance, John Commentformonoff.php: <?php if (!isLoggedIn()) { if (isset($_POST['cmdlogin'])) { if (checkLogin($_POST['username'], $_POST['password'])) { show_commentbox($submissionid, $submission, $url, $submittor, $submissiondate, $countcomments, $dispurl); } else { echo "<div class='logintocomment'>Login to comment</div>"; } } else { echo "<div class='logintocomment'>Login to comment</div>"; } } else { show_commentbox($submissionid, $submission, $url, $submittor, $submissiondate, $countcomments, $dispurl); } ?> Function "show_commentbox": function show_commentbox($submissionid, $submission, $url, $submittor, $submissiondate, $countcomments, $dispurl) { echo '<form action="http://www...com/.../comments/comments2a.php" method="post"> <input type="hidden" value="'.$_SESSION['loginid'].'" name="uid"> <input type="hidden" value="'.$_SESSION['username'].'" name="u"> <input type="hidden" value="'.$submissionid.'" name="submissionid"> <input type="hidden" value="'.stripslashes($submission).'" name="submission"> <input type="hidden" value="'.$url.'" name="url"> <input type="hidden" value="'.$submittor.'" name="submittor"> <input type="hidden" value="'.$submissiondate.'" name="submissiondate"> <input type="hidden" value="'.$countcomments.'" name="countcomments"> <input type="hidden" value="'.$dispurl.'" name="dispurl"> <label class="addacomment" for="title">Add a comment:</label> <textarea class="checkMax" name="comment" type="comment" id="comment" maxlength="1000"></textarea> <div class="commentsubbutton"><input name="submit" type="submit" value="Submit"></div> </form> '; } Included in comments2a.php: $uid = mysql_real_escape_string($_POST['uid']); $u = mysql_real_escape_string($_POST['u']); $query = sprintf("INSERT INTO comment VALUES (NULL, %d, %d, '%s', NULL)", $uid, $subid, $comment); mysql_query($query) or die(mysql_error()); $lastcommentid = mysql_insert_id(); header("Location: comments2.php?submission=".$submission."&submissionid=".$submissionid."&url=".$url."&submissiondate=".$submissiondate."&comment=".$comment."&subid=".$subid."&uid=".$uid."&u=".$u."&submittor=".$submittor."&countcomments=".$countcomments."&dispurl=".$dispurl."#comment-$lastcommentid"); exit(); Included in comments2.php: if($_SERVER['REQUEST_METHOD'] == "POST"){header('Location: http://www...com/.../comments/comments2.php?submission='.$submission.'&submissionid='.$submissionid.'&url='.$url.'&submissiondate='.$submissiondate.'&submittor='.$submittor.'&countcomments='.$countcomments.'&dispurl='.$dispurl.'');} $uid = mysql_real_escape_string($_GET['uid']); $u = mysql_real_escape_string($_GET['u']);

    Read the article

< Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >