Search Results

Search found 7511 results on 301 pages for 'synchronized block'.

Page 224/301 | < Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >

• How do I install Windows XP from an external hard drive?

  - by Plasmer

  I'm trying to install Windows XP Media Center edition by copying the install disc image to an external hard drive and making it bootable. Has anyone had success getting this to work on systems that can't boot from dvds/floppies? I'm basically working from this guide: http://www.dl4all.com/other/21495-install-windows-xp-from-usb.html Update - 2/15/10 I used WinToFlash on my laptop to format my usb hard drive from my install dvd (Windows XP Media Center Version 2005 with Update Rollup 2 from Dell) and selected "boot from usb device" at the boot selection menu and the windows installer started up. However, an error message came up saying that: "A problem has been detected and windows has been shut down to prevent damage to your computer." Originally on my desktop machine, I had 1 150Gb SATA drive, and 2 150 Gb SATA drives striped together using RAID. From the hard drive diagnostics, it appears the windows install on one of the RAIDed disks lost a block and this has been preventing me from booting up. I replaced the standalone drive with a new 1Tb SATA drive and disconnected the other hard drives. Could the message be indicating a virus is on the unformatted drive? or the usb hard drive? Update 2 - 2/15/10 The external hard drive didn't find any viruses when scanned. I tried installing Vista Home Premium 64bit SP1 using WinToFlash and that installed successfully onto the new 1Tb drive. WinToFlash was really easy to use and helped a lot, thanks!

  Read the article

• Firefox cannot render icons from Font Awesome webfont set

  - by ADTC

  In Firefox (Windows 7), icons and glyphs that are called from the Font Awesome package do not render properly. An example of this can be seen on the Khan Academy website. Below the video the icons are shown as boxes with hex codes in them. This means that it isn't getting downloaded by Firefox. How it appears on Chrome (Windows 7), Safari (Mac OS X) and Stainless (Mac OS X): I found this question on Stack Overflow that may explain why this happens -- the CSS does use single quotes to enclose the font's src location. However, I don't have any write access to Khan Academy servers so I can't modify the actual website. I want to know if this can be fixed in Firefox, and how. I can run Greasemonkey scripts if that would help. I've already tried manually downloading the font and adding it to Windows' Fonts folder but this does not help. For reference, the CSS that sets this font up (not processed properly by Firefox) is: @font-face { font-family:'FontAwesome'; src:url('./fontawesome-webfont.eot'); src:url('./fontawesome-webfont.eot?#iefix') format('embedded-opentype'), url('./fontawesome-webfont.woff') format('woff'), url('./fontawesome-webfont.ttf') format('truetype'), url('./fontawesome-webfont.svg#FontAwesome') format('svg'); font-weight:normal; font-style:normal } [class^="icon-"]:before, [class*=" icon-"]:before { font-family:FontAwesome; font-weight:normal; font-style:normal; display:inline-block; text-decoration:inherit }

  Read the article

• What is the ip range of EC2

  - by Nicolas Kassis

  I'd like to setup a rule to block ssh request from EC2 since I've been seeing a large amount of ssh based attack from there and was wondering if anyone knew what their IP ranges are. EDIT: Thank you for the answer, I went ahead and implemented the iptables rules as follow. I ignore all traffic for the moment. Logging it just to see if the rules are working and for stats on how much crap EC2 is sending out ;) #EC2 Blacklist $IPTBLS -A INPUT -s 67.202.0.0/18 -j LOG --log-prefix "<firewall> EC2 traffic " $IPTBLS -A INPUT -s 67.202.0.0/18 -j DROP $IPTBLS -A INPUT -s 72.44.32.0/19 -j LOG --log-prefix "<firewall> EC2 traffic " $IPTBLS -A INPUT -s 72.44.32.0/19 -j DROP $IPTBLS -A INPUT -s 75.101.128.0/17 -j LOG --log-prefix "<firewall> EC2 traffic " $IPTBLS -A INPUT -s 75.101.128.0/17 -j DROP $IPTBLS -A INPUT -s 174.129.0.0/16 -j LOG --log-prefix "<firewall> EC2 traffic " $IPTBLS -A INPUT -s 174.129.0.0/16 -j DROP $IPTBLS -A INPUT -s 204.236.192.0/18 -j LOG --log-prefix "<firewall> EC2 traffic " $IPTBLS -A INPUT -s 204.236.192.0/18 -j DROP $IPTBLS -A INPUT -s 204.236.224.0/19 -j LOG --log-prefix "<firewall> EC2 traffic " $IPTBLS -A INPUT -s 204.236.224.0/19 -j DROP $IPTBLS -A INPUT -s 79.125.0.0/17 -j LOG --log-prefix "<firewall> EC2 traffic " $IPTBLS -A INPUT -s 79.125.0.0/17 -j DROP

  Read the article

• Relation between server_name in nginx sites-available, /etc/hosts file and A-records

  - by user2818584

  I have the following two server-blocks in my config-file in sites-available: server { listen 80; server_name www.mydomain.be; root /usr/share/nginx/html; index index.html index.htm; location / { try_files $uri $uri/ =404; } } server { listen 80; server_name sub.mydomain.be; root /usr/share/nginx/sub; index index.html index.htm; location / { try_files $uri $uri/ =404; } } I also created an A-record for both www.domain.be and sub.domain.be with the IP of my server as value. Yet, when I try to reload my nginx configuration with service nginx reload it fails. When I remove the second server-block, it reloads as expected. I know this topic is popular, and that there are loads of such [nginx][subdomain] questions here, but none of them seems to discuss explicitly how the following three things hang together: virtual hosts or server blocks in nginx (est. server_name matching) the effect of A-records on how nginx processes requests the need to add hosts to /etc/hosts Right now I have the impression that a lack of knowledge of this bigger picture, rather than specific knowledge of nginx configuration prevents me from making this work.

  Read the article

• Apache directory authorization bug (clicking cancel gives acces to partial content)

  - by s4uadmin

  I got a minor problem (as the site is not high priority) but still a very interesting one. I have an apache root domain wherein other sites live "/var/www/" And I have foo.example.com forwarding to "/var/www/foo-example" (wordpress site) The problem here is that when you go to foo.example.com you are prompted to enter credentials. If you hit cancel it gives you the access denied page. But when you go to the servers' direct IP (this gives you the default index page) and hit cancel when prompted for credentials it just keeps giving you the login screen, and after pressing cancel a few times more it gives (a perhaps cached) bare html part of the page. How do I prevent this from happening? Perhaps this is a bug... Even if I would block access to the root directory when going to the ip/foo-example it would still do this. And I want to keep all the directories within the www directory or at least all in the same. Thanks PS: here is my configuration: <VirtualHost *:80> DocumentRoot /var/www/wp-xxxxxxx/ ServerName beta.xxxxxxxxx.nl <Directory "/var/www/wp-xxxxxxxxx/"> Options +Indexes AuthName "xxxxxxxx Beta Site" AuthType Basic require valid-user Satisfy all AuthBasicProvider file AuthUserFile /var/www/wp-xxxxxxx/.htxxxxxxxxx order deny,allow allow from all </Directory> ServerAdmin [email protected] ServerAlias beta.xxxxxxx.nl </VirtualHost>

  Read the article

• setting up phpmyadmin with nginx within ubuntu 11.04

  - by Patrick

  I have nginx and php5-fpm running on ubuntu 11.04. I have installed phpmyadmin but im having trouble accessing it. I would like to access it via http://localhost/phpmyadmin I've used all the default locations for the nginx, php5, and phpmyadmin installs. I'm being directed to use the block below by the blog guide im following, but im not sure what to change to get it to point how im wanting it to. server { listen 80; server_name php.example.com; // <-I know i need to edit this, but not sure to what. access_log /var/log/nginx/localhost.access.log; root /usr/share/phpmyadmin; index index.php; location / { try_files $uri $uri/ @phpmyadmin; } location @phpmyadmin { fastcgi_pass 127.0.0.1:9000; fastcgi_param SCRIPT_FILENAME /usr/share/phpmyadmin/index.php; include /etc/nginx/fastcgi_params; fastcgi_param SCRIPT_NAME /index.php; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/phpmyadmin$fastcgi_script_name; include fastcgi_params; } }

  Read the article

• Port 22 is not responding

  - by Emanuele Feliziani

  I'm trying to make the jump to VPS from shared hosting for better performances and greater flexibility, but am stuck with the fact that I can't access the machine via ssh. First of all, the machine is a CentOS 6.3 cPanel x64 with WHM 11.38.0. Sshd is running (it appears in the current running processes). Making a port scan I see that port 22 is not responding. Port 21 is, but I am not able to access the machine via ftp (I think it's a security measure, but I don't know where to disable/enable it). So, I'm stuck in WHM and have no way to access the configuration of the machine, neither via ssh nor with ftp/sftp. When trying to connect with ssh via Terminal I only get this: ssh: connect to host xx.xx.xxx.xxx port 22: Operation timed out I also tried to access with the hostname instead of the IP address and it's the same. There seem to be no firewall in WHM and I have whitelisted my home IP address to access ssh, though there were no restrictions in the first place. I have been wandering through all the settings and options in WHM for several hours now, but can't seem to find anything. Does anybody have a clue as to where I should start investigating? Update: Thanks everyone. It was in fact a matter of firewall. There was a firewall not controlled by the WHM software. I managed to crack into the console from the vps control panel (a terrible, terrible java app that barely took my keyboard input) and disabled the firewall altogether running service iptables stop so that I was able to access the console via ssh with the terminal. Now I will have to set up the firewall again because the command I ran looks like having completely wiped the iptables. Can you recommend any newby-friendly resource where I can learn how to go about this and what should I block? Or should I just go with something like this: http://configserver.com/cp/csf.html ? Thanks again to everyone who helped me out.

  Read the article

• Server 2003 and XP Client; Why are HTTP connections being silently dropped.

  - by Asa Yeamans

  On my network, my edge-router, a windows 2003 r2 server router with all the latest updates, will drop packets, but only under specific circumstances. I have troubleshot and isolated it down to the most simple configuration i can. There is NO NAT involved. Only fully-public IP addresses. No Firewalls are running either, all ahve been disabled. no packet filters on any interfaces anywhere either. I have a single Windows XP virtual machine and my edge-router(the windows 2003 r2 server, and also a virtual machine) running on a windows 2008 x64 r2 system (running virtual server 2005 as i dont have Intel-VT compatible chip yet). The edge router can access any external http site just fine, no issues. However the windows XP machine is only able to access certain sites. These work: www.google.com www.txstate.edu www.workintexas.com www.thedailywtf.com . These Dont: www.yahoo.com www.utexas.edu en.wikipedia.org slashdot.org www.bing.com. I have removed all possibility of DNS issues by connecting with net-cat from the XP box and sending GET /\r\nHost: \r\n\r\n and that connection replicates the issue as well. The network setup: My statically assigned IP block: x.x.x.168/29 DSL Modem -----PPPoE Connection---- x.x.x.169[EdgeRouter] [EdgeRouter]x.x.x.170 -----Virtual Ethernet----- x.x.x.174 [Test2] Test2's Default gateway is x.x.x.170 and test2 can ping any and every valid, accessible, public IP address with no packet loss what-so-ever. If i connect directly over PPPoE from test2 (the XP box) everything works just fine... Im at my wits end, i have NO IDEA whats causing this.

  Read the article

• Enable gzip on Nginx

  - by Rob Wilkerson

  Yes, I know that there are a lot of other questions that seem exactly like this out there. I think I must've looked all of them. Twice. In desparation, I'm adding another in case my specific configuration is the issue. Bear with me. First, the question: What do I need to do to get gzip compression to work? I have an Ubuntu 12.04 server installed running nginx 1.1.19. Nginx was installed with the following packages: nginx nginx-common nginx-full The http block of my nginx.conf looks like this: http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "msie6"; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } Both PageSpeed and YSlow are reporting that I need to enable compression. I can see that the request headers indicate Accept-Encoding:gzip,deflate,sdch, but the response headers do not have the corollary Content-Encoding header. I've tried various other config values (gzip_vary on, gzip_http_version 1.0, etc.), but no joy. As far as I know, I can only assume that nginx was compiled with compression support, but if there's any way to verify that, I'd love to know. If anyone sees anything I'm missing or can suggest further debugging, please let me know. I'm no sysadmin and I'm new to Nginx so I've exhausted everything I can think of or have read. Thanks.

  Read the article

• I get "An error occurred while Windows was synchronizing with [name of time server]." when trying t

  - by ChrisF

  Prompted by the answers to this question I decided to give the Windows built in time synchronisation another go. However, no matter what time server I use I get this error: "An error occurred while Windows was synchronizing with [name of time server]." The help suggests the following as reasons for failure: You are not connected to the Internet. Establish an Internet connection before you attempt to synchronize your clock. Your personal or network firewall prevents clock synchronization. Most corporate and organizational firewalls will block time synchronization, as do some personal firewalls. Home users should read the firewall documentation for information about unblocking network time protocol (NTP). You should be able to synchronize your clock if you switch to Windows Firewall. The Internet time server is too busy or is temporarily unavailable. If this is the case, try synchronizing your clock later, or update it manually by double-clicking the clock on the taskbar. You can also try using a different time server. The time shown on your computer is too different from the current time on the Internet time server. Internet time servers might not synchronize your clock if your computer's time is off by more than 15 hours. To synchronize the time properly, ensure that the date and time settings are set close to your current time in the Date and Time Properties in Control Panel. Now the first reason is clearly wrong - I am connected to the internet. I can see the 2nd being the most likely cause. I have Sygate Personal Firewall running, but it normally asks if something it trying to connect for the first time. Does anyone know I can unblock the NTP protocol - or at least check if it is blocked?. I don't think it's #3 or #4 as I've tried a number of different servers including the one currently used by Atomic Clock Sync. Though if someone knows the address of a UK time server I can double check this.

  Read the article

• PHP Causing Segmentation Fault & Apache Blank Response

  - by Joe

  I recently updated a Debian Lenny server to php 5.3,5 using the dotdeb source. Soon after doing so certain (but not all) sites on the server stopped responding to requests. A blank response would be returned - no headers, no content, nothing. I found this related question on stackoverflow which seems to describe something similar and used the same code the user had in their answer to see if I could replicate the issue: <?php class A { public function __construct() { new B; } } class B { public function __construct() { new A; } } new A; print 'Loaded Class A'; ?> This triggered the problem - the page returned absolutely nothing despite the original question stating this was fixed in PHP 5.5.0. No CPU block as you'd expect, no wait, just an almost instant zero response. I then ran this same code from the cli (php -f test.php) and the only output I got was 'Segmentation fault'. Tailing the kernel log I've spotted: Feb 16 07:04:06 creature kernel: [192203.269037] php[17710] general protection ip:76ef37 sp:7fff155e9bb0 error:0 in php5[400000+870000] Feb 16 08:57:31 creature kernel: [199639.699854] apache2[31136]: segfault at 7fff13a84fe0 ip 7f730514ea40 sp 7fff13a85008 error 6 in libphp5.so[7f7304ce8000+915000] All extremely odd and I'm not sure what it's pointing to/what I should do to debug this further. As I said some sites work but code such as the above definitely trigger it. Not that the sites I want to server have code like that - it's just an example. Any help is much appreciated!

  Read the article

• Require and Includes not Functioning Nginx Fpm/FastCGI

  - by Vince Kronlein

  I've split up my FPM pools so that php will run under each individual user and set the routing correctly in my vhost.conf files to pass the proper port number. But I must have something incorrect in my environment because on this new domain I set up, require, require_once, include, include_once do not function, or rather, they may not be getting passed up to the interpreter to be rendered as php. Since I already have a Wordpress install on this server that runs perfectly, I'm pretty sure the error is in my server block for nginx. server { server_name www.domain.com; rewrite ^(.*) http://domain.com$1 permanent; } server { listen 80; server_name domain.com; client_max_body_size 500M; index index.php index.html index.htm; root /home/username/public_html; location / { try_files $uri $uri/ index.php; } location ~ \.php$ { if (!-e $request_filename) { rewrite ^(.*)$ /index.php?name=$1 break; } fastcgi_pass 127.0.0.1:9002; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } location ~ /\.ht { deny all; } } The problem I'm finding I think is that there are dynamic calls to the doc root index file, while all calls to anything within a sub-folder should be routed as normal ie: NOT passed to index.php. I can't seem to find the right mix here. It should run like so: domain.com/cindy (file doesn't exist) --> index.php?name=$1 domain.com/admin/anyfile.php (files DO exist) --> admin/anyfile.php?$args

  Read the article

• Is my OCZ SSD aligned correctly? (Linux)

  - by Barney Gumble

  I have an OCZ Agility 2 SSD with 40 GB of space. I use it as a system drive in Debian Linux (Squeeze) and in my opinion it's really fast. But I've read a lot on aligning partitions and file systems... And I'm not sure if I succeeded in aligning the partitions correctly. Maybe the SSD could be even faster?? ;-) I use ext4 and here is the output of fdisk -cul: Disk /dev/sda: 40.0 GB, 40018599936 bytes 255 heads, 63 sectors/track, 4865 cylinders, total 78161328 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: [...] Device Boot Start End Blocks Id System /dev/sda1 * 2048 73242623 36620288 83 Linux /dev/sda2 73244670 78159871 2457601 5 Extended /dev/sda5 73244672 78159871 2457600 82 Linux swap / Solaris My partitions were created just by the Debian Squeeze setup assistant. So I didn't care about the details of partitioning. But now I think maybe the installer didn't align it correctly? Actually, 2048 looks good to me (better than odd values like 63 or something like that) but I've no idea... ;-) Help plz! According to some "SSD Alignment Calculator" I found on the web, the OCZ SSDs have a NAND Erase Block Size of 512kB and their NAND Page Size is 4kB. 2048 is divisible by 4 and 512. So are the partitions aligned correctly?

  Read the article

• PHP 5.4.9 Mysqli issue

  - by Vitaly

  On Ubuntu 12.04 server I had PHP 5.4.9 installed from the source: ./configure --prefix=/etc/php --with-apxs2=/etc/apache2/bin/apxs --with-config-file-path=/etc/php --with-config-file-scan-dir=/etc/php/conf.d --with-libxml-dir=/usr/local/libxml2 --with-xsl=/usr/local/libxslt --with-mysql --with-zlib --with-pdo-mysql --enable-calendar --with-gd --with-iconv-dir --enable-mbstring --enable-soap --enable-sockets --enable-zip --with-curl --with-openssl --with-kerberos --with-tidy' Then, using apt-get, I had mysql server and phpMyAdmin installed. Unfortunatelly phpMyAdmin keep saying that 'mysqli' and 'mcrypt' not installed. php -m | grep mysqli just confirms it. So I tried to install mysqli with "apt-get install php5-mysqli", but just got message to do it by means of "php5-mysqlnd" or "php5-mysql". Even though they are already installed (according to phpinfo()) I tried - doesn't work. However, in php.ini, there's mysqli staff like "extension=php_mysqli.dll", but no "extension=mysqli.so". And block [MySQLi] with some uncommented settings also present. Since this is my first attempt to build php from source I reckon I did some silly mistake. Any help is greatly appreciated.

  Read the article

• Single m0n0wall - Two LAN Subnets - How To Setup

  - by SnAzBaZ

  I have two LAN subnets that I need to link together they are 192.168.4.0/24 and 192.168.5.0/24 There is a m0n0wall running on 192.168.4.1. It's LAN connection goes out to our network switch, and it's WAN port goes out to our ADSL modem. WAN is connected via PPPoE. The 192.168.4.0 subnet contains all of our office workstations. The 192.168.5.0 subnet contains development servers and test machines that need to obtain internet access and be "managed" by computers on the 192.168.4.0 subnet, but need to be on their own subnet as well. I have a Draytek 2820N configured on 192.168.5.1 with it's WAN2 port configured as 192.168.4.25 and a default gateway of 192.168.4.1. Machines on the 5.0 subnet can connect to the internet via the m0n0wall just fine. I configured a static route on the m0n0wall LAN interface, Network 192.168.5.0/24 and Gateway 192.168.4.25. Machines on the 5.0 subnet can ping machines on the 4.0 network but the reverse does not work. I configured a new firewall rule on the m0n0wall that allows any traffic on the LAN interface with a source IP of 192.168.4.25 to be allowed. The DrayTek firewall is currently configured to pass all traffic regardless. When I try to ping a machine in the 5.0 subnet from 4.0 I see this in my m0n0wall log: BLOCK 14:45:27.888157 LAN 192.168.4.25 192.168.4.37, type echoreply/0 ICMP So the reply is being sent from the 5.0 subnet but is not being allowed to reach my workstation because the firewall is blocking it. Why is the firewall blocking it ? I hope the explanation of my network is clear, please ask if you require further clarification. Thank you.

  Read the article

• Filesystem fragmentation on the level of set of files

  - by trismarck

  The file is stored in blocks by the file system. The block is the smallest amount of data the file system can assign to store a file. The classical definition of a fragmented file is that the file is stored in blocks that are 'scattered' (that are physically non-contiguous) around the hard drive. What I want to ask about is this second type of fragmentation I've came up with. Lets suppose we install a program. This program has very many files. When the program starts, the program always loads the contents of those files sequentially. Now, even if the hard disk is defragmented, there is still a possibility that the files (but not the blocks building up to files) will be scattered on the disk and thus the program launch time will be longer. Actually, this time could be longer due to defragmentation of the disk, as the defragmentation process not only glues fragmented files but also moves some files to optimize free space chunks. The questions: is the type of fragmentation I mentioned relevant for the file system? is it possible to remedy this kind of fragmentation and if yes, how would you do it? Also, I'm not sure if this question should belong to superuser or to serverfault (as I guess the filesystem fragmentation is more important in the server environment).

  Read the article

• SVN checkout returns 400 error

  - by eboix

  I'm trying to download the http://code.opencv.org/svn/opencv/trunk/ repository of all of the OpenCV source code - as specified in an OpenCV installation tutorial. In the tutorial, the repository https://code.ros.org/svn/opencv/trunk/ is used, but they moved it to http://code.opencv.org/svn/opencv/trunk/, and now you need a password to access the code.ros.org repository. Anyway, I'm using TortoiseSVN to download the SVN repository. (I get the same error with http://sourceforge.net/projects/win32svn/) I get this: Checkout from http://code.opencv.org/svn/opencv/trunk, revision HEAD, Fully recursive, Externals included Server sent unexpected return value (400 Bad request. Method Unknown) in response to REPORT request for '/svn/opencv/!svn/vcc/default' On the TortoiseSVN site I found something about this 400 error: You're behind a firewall which blocks DAV requests. Most firewalls do that. Either ask your Administrator to change the firewall, or access the repository with https:// instead of http:// like in https://svn.collab.net/repos/svn/ That way you connect to the repository with SSL encryption, which firewalls can't interfere with (if they don't block the SSL port completely). Also some virus scanners (i.e. Kapersky) are known to interfere and cause this error. The code.ros.org repository is https://, so I would be able to access it, but I need a password, so I can't. I made an account on ros.org, but it seems that I still need a password (which I don't know) to access the code repository. My username-password combination does not work. I unblocked all of the TortoiseSVN programs in my firewall settings. Nothing changed. I temporarily stopped my firewall to see if it was interfering with my request. I got the same error. How can I do an svn checkout http://code.opencv.org/svn/opencv/trunk/opencv/ so that I don't get this error? Is there any way to make it https://? Any help would be appreciated!

  Read the article

• nginx with ssl: I get a 403 and log "directory index of '...dir...' is forbidden" log message. works fine with unencrypted connection

  - by user72464

  As mentioned in the title, I had nginx working fine with my rails app, until I tried to add the ssl server. The unencrypted connection still works but the ssl always returns me a 403 page with the following line in the error log: directory index of "/home/user/rails/" is forbidden, client: [my ip], server: _, request: "GET / HTTP/1.1", host: "[server ip]" Below my nginx.conf server block: server { listen 80; listen 443 ssl; ssl_certificate /etc/ssl/server.crt; ssl_certificate_key /etc/ssl/server.key; client_max_body_size 4G; keepalive_timeout 5; root /home/user/rails; try_files $uri/index.html $uri.html $uri @app; location @app { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto $scheme; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://0.0.0.0:8080; } error_page 500 502 503 504 /500.html; location = /500.html { root /home/user/rails; } } the /home/user/rails directory and it's parent have all read to all rights. and they belong to the user nginx. the certificate and key file have the following rights: -rw-r--r-- 1 nginx root 830 Nov 8 09:09 server.crt -rw--w---- 1 nginx root 887 Nov 8 09:09 server.key any clue?

  Read the article

• Tunneling a public IP to a remote machine

  - by Jim Paris

  I have a Linux server A with a block of 5 public IP addresses, 8.8.8.122/29. Currently, 8.8.8.122 is assigned to eth0, and 8.8.8.123 is assigned to eth0:1. I have another Linux machine B in a remote location, behind NAT. I would like to set up an tunnel between the two so that B can use the IP address 8.8.8.123 as its primary IP address. OpenVPN is probably the answer, but I can't quite figure out how to set things up (topology subnet or topology p2p might be appropriate. Or should I be using Ethernet bridging?). Security and encryption is not a big concern at this point, so GRE would be fine too -- machine B will be coming from a known IP address and can be authenticated based on that. How can I do this? Can anyone suggest an OpenVPN config, or some other approach, that could work in this situation? Ideally, it would also be able to handle multiple clients (e.g. share all four of spare IPs with other machines), without letting those clients use IPs to which they are not entitled.

  Read the article

• How to log kernel panics without KVM

  - by Spacedust

  My server is crashing and I can't find an answer why. It all started after my datacenter upgrade RAM from 16 GB to 32 GB. I also found such logs in dmesg - they've started to show itself just before the first kernel panic: EXT4-fs error (device md2): ext4_ext_find_extent: bad header/extent in inode #97911179: invalid magic - magic 5f69, entries 28769, max 26988(0), depth 24939(0) EXT4-fs error (device md2): ext4_ext_remove_space: bad header/extent in inode #97911179: invalid magic - magic 5f69, entries 28769, max 26988(0), depth 24939(0) EXT4-fs error (device md2): ext4_mb_generate_buddy: EXT4-fs: group 20974: 8589 blocks in bitmap, 54896 in gd JBD: Spotted dirty metadata buffer (dev = md2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. EXT4-fs error (device md2): ext4_ext_split: inode #97911179: (comm pdflush) eh_entries 28769 != eh_max 26988! EXT4-fs (md2): delayed block allocation failed for inode 97911179 at logical offset 1039 with max blocks 1 with error -5 This should not happen!! Data will be lost EXT4-fs error (device md2): ext4_mb_generate_buddy: EXT4-fs: group 21731: 5 blocks in bitmap, 60762 in gd JBD: Spotted dirty metadata buffer (dev = md2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. My system is CentOS 5.8 64-bit with latest kernel 2.6.18-308.20.1.el5. How can I check what is the reason of kernel panic without having an access to the KVM ? I have told my datacenter admins to check the memory in the server.

  Read the article

• Barriers to IPv6 deployment: addressing

  - by sysadmin1138

  There are several things that are keeping IPv6 deployment from being a topic of active discussion here at my work. There are the usual technical issues, but one non-technical one appears to be a major stumbling block on the path to actually getting a deployment project going. Addresses, memorizing of. Specifically, IPv4 addresses are comprehensible, and IPv6 addresses just look like a big long string of hex. The human mind has real trouble memorizing lists of more than 7-8 items, and an IPv4 address (192.168.231.148) has four items in it which makes it easy for us to memorize. A fully populated IPv6 address has not only 8 sections, but each section has 4 hex digits in it. IPv6 addresses were not designed for memorization. To the technician who knows that the DNS server is at 192.168.42.42 (or more likely "42.42", since the company prefix is likely memorized), the idea of memorizing an IPv6 address fills them with dread. Which in turn makes them much less enthusiastic about participating in an IPv6 deployment project. Because of how our network works we're not fully dynamic in terms of v4 addressing. We have several to many subnets that are entirely statically assigned for a variety of reasons, chief among them being that the overhead of static DHCP assignments is perceived as being too great. Also, some devices still aren't smart enough to pull DNS addresses out of DHCP while also having a static assignment, and therefore require manually configured DNS settings. Therefore, some v6 address memorization will have to be done. We're not under any mandate to get v6 out the door, so we don't have pressure from the top. However, it is time to start prepping our infrastructure to handle IPv6 even if we don't convert wholesale. For those of you who have been in IPv6-land for a while, what short-cut methods do you use to discuss or keep track of subnets and specific/critical IP addresses? If I can help reduce some of the dread surrounding IPv6 we might get the project going.

  Read the article

• Backup solution to backup terabytes and lots of static files on linux server?

  - by user28679

  Which backup tool or solution would you use to backup terabytes and lots of files on a production linux server ? Note that the files are all different and almost never modified, and usage is mostly adding files, so data volume is today 3TB growing all the time at around +15GB/day. Please do not reply rsync. Basic unix tools are not enough, rsync does not keep history, rdiff-backup miserably fails from time to time and screw the history. Moreover these are all file based backup, which put a lot of IOwait just to browse directories and query stat(). But i guess, except R1Soft CDP, there is no way around that. We tried R1Soft CDP backup, which is block level backup, and it proved good and efficient for all our other servers, but systematically fails on the server with 3 terabytes and gazillions of files. That is already more than 2 months that the engineers of R1Soft and datacenter are playing a hot ball game... and still no backup except regular rsync We never tried big commercial solutions, except R1Soft CDP since it was provided as an optional service by the datacented hosting our servers.

  Read the article

• Vlan on DD-WRT v24 filesharing without internet

  - by user148888

  I'm planning to do a vlan with shared files without internet. my vlan is working correctly until I could lock the internet but I can not share files only I can ping from 172.168.1.x to 172.168.2.x but not backward. can u help me please?? This is my config. WRT54g DD-wrt v24 vlan0 eth 1,2,3 172.168.1.1/24 vlan1 Wan vlan2 eth 4 172.168.2.1/24(don't want internet here just Lan Conection) Pc (my pc) 172.168.1.10/24 gtway 172.168.1.1 (with internet) Ubiquity Nanostation loco M2 172.168.2.20/24(AP)(connect to eth 4 vlan2)(don't want internet here) Ubiquity Nanostation loco M2 172.168.2.21/24(Client)(don't want internet here) Friend pc 172.168.2.115/24(connected from the client)(don't want internet here) Any Help Please.. ![Lan Map][1] ![Vlan Config1][2] ![Vlan Config2][3] ![Vlan Config3][4] ![Command to block internet][5] [url=http://imageshack.us/photo/my-images/194/lanxl.jpg/][img=http://imageshack.us/a/img194/4197/lanxl.th.jpg][/url] [url=http://imageshack.us/photo/my-images/600/commandmf.jpg/][img=http://imageshack.us/a/img600/9530/commandmf.th.jpg][/url] [url=http://imageshack.us/photo/my-images/811/57398524.jpg/][img=http://imageshack.us/a/img811/1917/57398524.th.jpg][/url] [url=http://imageshack.us/photo/my-images/717/48064277.jpg/][img=http://imageshack.us/a/img717/829/48064277.th.jpg][/url] [url=http://imageshack.us/photo/my-images/685/21456517.jpg/][img=http://imageshack.us/a/img685/256/21456517.th.jpg][/url]

  Read the article

• Which AMI to to use for Java/Tomcat/MySQL in Amazon EC2?

  - by Justin

  I originally posted this on stackoverflow.com and it was suggested serverfault.com might be a better place to ask this question. So here goes: I'm trying to determine which Amazon Machine Image (AMI) to use as my Virtual Server in Amazon's EC2. For now, I'll need to choose an AMI that complies with the AWS Free Usage Tier. I want to deploy a Java app that I've been developing using Eclipse on Windows XP, Tomcat 7 and MySQL 5.5. I'm aware that I can choose the Basic 32-bit Amazon Linux AMI. Then I'd manually install Tomcat and MySQL (does MySQL get installed on the image or separately on an Elastic Block Store (EBS)?). Here's the rub, I'm a bit of a Linux noob. I can start Tomcat and tail the logs and such on Linux but I'm not familiar with the install process for Tomcat and MySQL on Linux and commands like sudo and chmod. I'm happy to get more hands on with Linux but I'm short on time right now. Are there AMI's that already have Tomcat and MySQL bundled? The Request Instance Wizard shows 805 Community AMI's that are Free Tier Eligible. 51 of the Free Tier Eligible AMI's have "Tomcat" in their name. I'm willing to consider using Elastic Beanstalk but my research thus far hasn't found any discussion of using MySQL with Beanstalk. The discussions all seem to use Amazon's SimpleDB. Any advice is greatly appreciated.

  Read the article

• How to access previous VHD versions of system backup?

  - by feklee

  Quote from the 31 Oct 2009 TechNet article "Learn more about system image backup": During the first backup, the backup engine scans the source drive and copies only blocks that contain data into a .vhd file stored on the target, creating a compact view of the source drive. The next time a system image is created, only new and changed data is written to the .vhd file, and old data on the same block is moved out of the VHD and into the shadow copy storage area. Volume Shadow Copy Service is used to compute the changed data between backups, as well as to handle the process of moving the old data out to the shadow copy area on the target. This approach makes the backup fast (since only changed blocks are backed up) and efficient (since data is stored in a compact manner). When restoring the image, blocks will be restored to their original locations on the source disk. If you want to restore from an older backup, the engine reads from the shadow copy area and restores the appropriate blocks. For the last days, a daily system backup of drive C: to drive E: has been scheduled and run by Windows 7 Backup and Restore. Drive C: currently holds 233 GB of data, which fits comfortably on drive E:, a 1 TB drive, with 727 GB of free space remaining. How do I access the previous version of a VHD? I right clicked on files and folders in E:\WindowsImageBackup, and I looked for Previous Versions but always: There are no previous versions available

  Read the article

< Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >