Search Results

Search found 24865 results on 995 pages for 'default route'.

Page 226/995 | < Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >

• NHibernate.MappingException - Troubles Shooting Checklist (no persister for)

  - by Berryl

  Here's a starter list: 1) if hbm is hand generated, is it an embedded resource? 2) if using FNH, does it pass a PerssistenceSpecification test? 3) if not using FNH, can you save and then load the persisted class? 4) more? I'm sure many of you have gotten this one at one point or another. But have you ever gotten it when you knew your mapping was set up correctly? I started getting this exception after I started using a new repository design, but only in one scenario! PersistenceSpecification tests pass, as do all repository methods (using SQLite). The scenario that leads to the exception is when legacy projects from a different db are converted to green field system. The legacy system is from a different database and has it's own session factory, which should be irrelevant because the error comes after previously unconverted Projects are retrieved and in memory. As the routine tries to save these unconverted Projects into the new database, the exception is thrown, full stack trace below. Any ideas on how to build up the trouble shooting check list and solves this problem? Cheers, Berryl === the Exception trace ===== failed: NHibernate.MappingException : No persister for: Smack.ConstructionAdmin.Domain.Model.Projects.Project at NHibernate.Impl.SessionFactoryImpl.GetEntityPersister(String entityName) at NHibernate.Impl.SessionImpl.GetEntityPersister(String entityName, Object obj) at NHibernate.Engine.ForeignKeys.IsTransient(String entityName, Object entity, Nullable`1 assumed, ISessionImplementor session) at NHibernate.Event.Default.AbstractSaveEventListener.GetEntityState(Object entity, String entityName, EntityEntry entry, ISessionImplementor source) at NHibernate.Event.Default.DefaultSaveOrUpdateEventListener.PerformSaveOrUpdate(SaveOrUpdateEvent event) at NHibernate.Event.Default.DefaultSaveOrUpdateEventListener.OnSaveOrUpdate(SaveOrUpdateEvent event) at NHibernate.Impl.SessionImpl.FireSaveOrUpdate(SaveOrUpdateEvent event) at NHibernate.Impl.SessionImpl.SaveOrUpdate(Object obj) NHibernate\Repository\FabioNHibRepository.cs(46,0): at Smack.Core.Data.NHibernate.Repository.FabioNHibRepository`1.Add(T item) LegacyConversion\LegacyBatchUpdater.cs(20,0): at Smack.ConstructionAdmin.Data.LegacyConversion.LegacyBatchUpdater.ConvertOpenLegacyProjects(ILegacyProjectDao legacyProjectDao, IProjectRepository greenProjectRepository) Data\Brownfield\ProjectBatchUpdate_SQLiteTests.cs(19,0): at Smack.ConstructionAdmin.Tests.Data.Brownfield.ProjectBatchUpdate_SQLiteTests.Test()

  Read the article

• Asp net aspx page and webcontrol issue

  - by Josemalive

  Hello, I have a class that inherits from Page, called APage. public abstract class APage: Page { protected Repeater ExampleRepeater; .... protected override void OnLoad(EventArgs e) { if (null != ExampleRepeater) { ExampleRepeater.DataSource = GetData(); ExampleRepeater.DataBind(); } base.OnLoad(e); } } For other hand i have an aspx page called Default that inherits from this APage: public partial class Default : APage { } on the design part of this Default page, i have a repeater: <asp:Repeater ID="ExampleRepeater" runat="server"> <ItemTemplate> <%# DataBinder.Eval(Container.DataItem, "Name") %><br/> </ItemTemplate> </asp:Repeater> This repeater is datasourced at the base APage load event, but at this level this web control is null. Do you have any idea why the control is null in the base page? Thanks in advance. Best Regards. Jose.

  Read the article

• Variable field in a constraint annotation

  - by Javi

  Hello, I need to create a custom constraint annotation which can access the value of another field of my bean. I'll use this annotation to validate the field because it depends on the value of the other but the way I define it the compiler says "The value for annotation attribute" of my field "must be a constant expression". I've defined it in this way: @Target(ElementType.FIELD) @Retention(RetentionPolicy.RUNTIME) @Constraint(validatedBy=EqualsFieldValidator.class) @Documented public @interface EqualsField { public String field(); String message() default "{com.myCom.annotations.EqualsField.message}"; Class<?>[] groups() default {}; Class<? extends Payload>[] payload() default {}; } public class EqualsFieldValidator implements ConstraintValidator<EqualsField, String>{ private EqualsField equalsField; @Override public void initialize(EqualsField equalsField) { this.equalsField = equalsField; } @Override public boolean isValid(String thisField, ConstraintValidatorContext arg1) { //my validation } } and in my bean I want something like this: public class MyBean{ private String field1; @EqualsField(field=field1) private String field2; } Is there any way to define the annotation so the field value can be a variable? Thanks

  Read the article

• HAProxy create custom routing logic

  - by kumar

  Is it possible to write a custom routing logic for HAProxy. I need it in such a way that each application server is allocated a max on 1000 TCP connections then only should the loadbalancer try to route next TCP request to next application server. if not with HAProxy if there any other Load balancer that can do it please let me know. Can persistence be applied to TCP connections. There will no HTTP request. thanks

  Read the article

• Fortigate 80C multi wan

  - by emamdouh

  I've Fortigate 80c and two internet lines from two separate ISPs. I'm trying to distribute sessions between both internet lines following http://docs-legacy.fortinet.com/cb/html/index.html#page/FOS_Cookbook/Install_advanced/routing_ecmp_basic.html , but it seems connections go through just one of two internet lines. I have "wan1 as it's configured first, and I could edit static route table to be wan2 instead of wan1", but not both of internet lines I have. Any ideas why this happens? Thanks in advance

  Read the article

• autocommit and @Transactional and Cascading with spring, jpa and hibernate

  - by subes

  Hi, what I would like to accomplish is the following: have autocommit enabled so per default all queries get commited if there is a @Transactional on a method, it overrides the autocommit and encloses all queries into a single transaction, thus overriding the autocommit if there is a @Transactional method that calls other @Transactional annotated methods, the outer most annotation should override the inner annotaions and create a larger transaction, thus annotations also override eachother I am currently still learning about spring-orm and couldn't find documentation about this and don't have a test project for this yet. So my questions are: What is the default behaviour of transactions in spring? If the default differs from my requirement, is there a way to configure my desired behaviour? Or is there a totally different best practice for transactions? --EDIT-- I have the following test-setup: @javax.persistence.Entity public class Entity { @Id @GeneratedValue private Integer id; private String name; public Integer getId() { return id; } public void setId(Integer id) { this.id = id; } public String getName() { return name; } public void setName(String name) { this.name = name; } } @Repository public class Dao { @PersistenceContext private EntityManager em; public void insert(Entity ent) { em.persist(ent); } @SuppressWarnings("unchecked") public List<Entity> selectAll() { List<Entity> ents = em.createQuery("select e from " + Entity.class.getName() + " e").getResultList(); return ents; } } If I have it like this, even with autocommit enabled in hibernate, the insert method does nothing. I have to add @Transactional to the insert or the method calling insert for it to work... Is there a way to make @Transactional completely optional?

  Read the article

• sfJQueryUIPlugin: No Picker for new records

  - by Prasad

  Everyday is a new day with Symfony, but I'm loving it! This morning I installed the sfJQueryUIPlugin. It has very little dependencies & accepts themeRoller styles. However, it has 2 issues: [Feature_Request] There is no way to specify the year range. By default, it shows a 20 year range around the year in the field value. eg. if field value is 1993-01-20, the range will be 1983 to 2003. ??? Has anyone found a way out??? The DatePicker does not appear when the field is empty, Thus it does not show up during new record creation. To solve this, I tried setting up the default value in the date input field (which now appears as a text input) using $this->setDefault('date_of_birth',date('Y-m-d')); ??? Is anybody facing this problem of picker now available during new record creation ??? ??? Also is it the right way to set default value ??? Thanks in advance.

  Read the article

• How to add a Web Part Zone to a SharePoint wiki page?

  - by Hitesh

  Hi, I have a team site. I understand that the default home page of a team site is a wiki page. I want to add a web part zone to this page. How can I do that? By default it already has Web Part Zone -. You can use SharePoint designer to add a web part to this zone and it works fine. But you are not able to add a web part to this zone using SharePoint web UI? Ususally when you have a web part zone in a page, using SharePoint web UI, it allows to you add/remove a web part. But it is not the case with the web part zone on the default home page of a team site. Also is there any way I can add a web part zone to this page? I do know that you can easily add web parts into wiki page content. But I want to add a new web part zone where users can add/remove web parts. Thanks, Hitesh

  Read the article

• How to keep my topmost window on top?

  - by Misko Mare

  I will first explain why I need it, because I anticipate that the first response will be "Why do you need it?". I want to detect when the mouse cursor is on an edge of the screen and I don't want to use hooks. Hence, I created one pixel wide TOPMOST invisible window. I am using C++ on Win XP, so when the window is created (CreateWindowEx(WS_EX_TOPMOST | WS_EX_TRANSPARENT ...) everything works fine. Unfortunately, if a user moves another topmost window, for example the taskbar over my window, I don't get mouse movements. I tried to solve this similarly to approaches suggested in: How To Keep an MDI Window Always on Top I tried to check for Z-order of my topmost window in WM_WINDOWPOSCHANGED first with case WM_WINDOWPOSCHANGED : WINDOWPOS* pWP = (WINDOWPOS*)lParam; yet pWP-hwnd points to my window and pWP-hwndInsertAfter is 0, which should mean that my window is on the top of the Z, even though it is covered with the taskbar. Then I tried: case WM_WINDOWPOSCHANGED : HWND topWndHndl = GetNextWindow(myHandle, GW_HWNDPREV) GetWindowText(topWndHndl, pszMem, cTxtLen + 1); and I'll always get that the "Default IME" window is on top of my window. Even if try to bring my window to the top with SetWindowPos() or BringWindowToTop (), "Default IME" stays on the top. I don't know what is "Default IME" and how to detect if the taskbar is on top of my window. So my question is: How to detect that my topmost window is not the top topmost window anymore and how to keep it on the top? P.S. I know that a "brute force" approach of periodically bringing my window to the top works, yet is ugly and could have some unwanted inference with the notification window for example. (Bringing my window to the top will hide the notification window.) Thank you on your time and suggestions!

  Read the article

• Use lineout on Mac for audio processing

  - by eltufto

  Does anyone know of a way to set the linein on a Mac to route from the lineout? I want to essentially work with the music played on my Mac. An alternative solution I suppose would be to set the Linein as the output from iTunes/other music player. For context: My specific use-case is audio processing in Processing with the minim library, calling getLineIn. Trying to create some visuals that respond to the music being played.

  Read the article

• Routing all traffic thru socks proxy using ssh -D

  - by grm

  Hi, is it any easy way to route all traffic through a ssh proxy with -D? I can configure individual specific applications to do this, but I would like a configuration that routes all the traffic on the machine. Thanks for your help!

  Read the article

• MySQL ORDER BY DESC is fast but ASC is very slow

  - by Pepper

  Hello, I'm completely stumped on this one. For some reason when I sort this query by DESC it's super fast, but if sorted by ASC it's extremely slow. This takes about 150 milliseconds: SELECT posts.id FROM posts USE INDEX (published) WHERE posts.feed_id IN ( 4953,622,1,1852,4952,76,623,624,10 ) ORDER BY posts.published DESC LIMIT 0, 50; This takes about 32 seconds: SELECT posts.id FROM posts USE INDEX (published) WHERE posts.feed_id IN ( 4953,622,1,1852,4952,76,623,624,10 ) ORDER BY posts.published ASC LIMIT 0, 50; The EXPLAIN is the same for both queries. id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE posts index NULL published 5 NULL 50 Using where I've tracked it down to "USE INDEX (published)". If I take that out it's the same performance both ways. But the EXPLAIN shows the query is less efficient overall. id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE posts range feed_id feed_id 4 \N 759 Using where; Using filesort And here's the table. CREATE TABLE `posts` ( `id` int(20) NOT NULL AUTO_INCREMENT, `feed_id` int(11) NOT NULL, `post_url` varchar(255) NOT NULL, `title` varchar(255) NOT NULL, `content` blob, `author` varchar(255) DEFAULT NULL, `published` int(12) DEFAULT NULL, `updated` datetime NOT NULL, `created` datetime NOT NULL, PRIMARY KEY (`id`), UNIQUE KEY `post_url` (`post_url`,`feed_id`), KEY `feed_id` (`feed_id`), KEY `published` (`published`) ) ENGINE=InnoDB AUTO_INCREMENT=196530 DEFAULT CHARSET=latin1; Is there a fix for this? Thanks!

  Read the article

• Match entities fulfilling filter (strict superset of search)

  - by Jon

  I have an entity (let's say Person) with a set of arbitrary attributes with a known subset of values. I need to search for all of these entities that match all my filter conditions. That is, given a set of Attributes A, I need to find all people that have a set of Attributes that are a superset of A. For example, my table structures look like this: Person: id | name 1 | John Doe 2 | Jane Roe 3 | John Smith Attribute: id | attr_name 1 | Sex 2 | Eye Color ValidValue: id | attr_id | value_name 1 | 1 | Male 2 | 1 | Female 3 | 2 | Blue 4 | 2 | Green 5 | 2 | Brown PersonAttributes id | person_id | attr_id | value_id 1 | 1 | 1 | 1 2 | 1 | 2 | 3 3 | 2 | 1 | 2 4 | 2 | 2 | 4 5 | 3 | 1 | 1 6 | 3 | 2 | 4 In JPA, I have entities built for all of these tables. What I'd like to do is perform a search for all entities matching a given set of attribute-value pairs. For instance, I'd like to be able to find all males (John Doe and John Smith), all people with green eyes (Jane Roe or John Smith), or all females with green eyes (Jane Roe). I see that I can already take advantage of the fact that I only really need to match on value_id, since that's already unique and tied to the attr_id. But where can I go from there? I've been trying to do something like the following, given that the ValidValue is unique in all cases: select distinct p from Person p join p.personAttributes a where a.value IN (:values) Then I've tried putting my set of required values in as "values", but that gives me errors no matter how I try to structure that. I also have to get a little more complicated, as follows, but at this point I'd be happy with solving the first problem cleanly. However, if it's possible, the Attribute table actually has a field for default value: id | attr_name | default_value 1 | Sex | 1 2 | Eye Color | 5 If the value you're searching on happens to be the default value, I want it to return any people that have no explicit value set for that attribute, because in the application logic, that means they inherit the default value. Again, I'm more concerned about the primary question, but if someone who can help with that also has some idea of how to do this one, I'd be extremely grateful.

  Read the article

• Error // Usage: rails new APP_PATH [options] // when running 'rails server'

  - by madphill

  Background info: I'm using GIT to get a repository of a project with Ruby files in it. The project lives in my SITES folder under home directory on my Mac. I have Ruby: 1.8.7 I have just upgraded Rails to: 3.0.3 All I am trying to accomplish is to be able to render localhost.com:3000 in my browser of the GIT project i've already downloaded so I can work on it locally. I ran the command 'rails server' and was returned the message below:: Usage: rails new APP_PATH [options] Options: [--skip-gemfile] # Don't create a Gemfile -m, [--template=TEMPLATE] # Path to an application template (can be a filesystem path or URL) -d, [--database=DATABASE] # Preconfigure for selected database (options: mysql/oracle/postgresql/sqlite3/frontbase/ibm_db) # Default: sqlite3 -O, [--skip-active-record] # Skip Active Record files -J, [--skip-prototype] # Skip Prototype files -T, [--skip-test-unit] # Skip Test::Unit files [--dev] # Setup the application with Gemfile pointing to your Rails checkout -r, [--ruby=PATH] # Path to the Ruby binary of your choice # Default: /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/bin/ruby -G, [--skip-git] # Skip Git ignores and keeps -b, [--builder=BUILDER] # Path to an application builder (can be a filesystem path or URL) [--edge] # Setup the application with Gemfile pointing to Rails repository Runtime options: -f, [--force] # Overwrite files that already exist -s, [--skip] # Skip files that already exist -p, [--pretend] # Run but do not make any changes -q, [--quiet] # Supress status output Rails options: -h, [--help] # Show this help message and quit -v, [--version] # Show Rails version number and quit Description: The 'rails new' command creates a new Rails application with a default directory structure and configuration at the path you specify. Example: rails new ~/Code/Ruby/weblog This generates a skeletal Rails installation in ~/Code/Ruby/weblog. See the README in the newly created application to get going.

  Read the article

• Why won't vyatta allow SMTP through my firewall?

  - by Solignis

  I am setting up a vyatta router on VMware ESXi, But I see to have hit a major snag, I could not get my firewall and NAT to work correctly. I am not sure what was wrong with NAT but it "seems" to be working now. But the firewall is not allowing traffic from my WAN interface (eth0) to my LAN (eth1). I can confirm its the firewall because I disabled all firewall rules and everything worked with just NAT. If put the firewalls (WAN and LAN) back in place nothing can get through to port 25. I am not really sure what the issue could be I am using pretty basic firewall rules, I wrote the rules while looking at the vyatta docs so unless there is something odd with the documentation they "should" be working. Here is my NAT rules so far; vyatta@gateway# show service nat rule 20 { description "Zimbra SNAT #1" outbound-interface eth0 outside-address { address 74.XXX.XXX.XXX } source { address 10.0.0.17 } type source } rule 21 { description "Zimbra SMTP #1" destination { address 74.XXX.XXX.XXX port 25 } inbound-interface eth0 inside-address { address 10.0.0.17 } protocol tcp type destination } rule 100 { description "Default LAN -> WAN" outbound-interface eth0 outside-address { address 74.XXX.XXX.XXX } source { address 10.0.0.0/24 } type source } Then here is my firewall rules, this is where I believe the problem is. vyatta@gateway# show firewall all-ping enable broadcast-ping disable conntrack-expect-table-size 4096 conntrack-hash-size 4096 conntrack-table-size 32768 conntrack-tcp-loose enable ipv6-receive-redirects disable ipv6-src-route disable ip-src-route disable log-martians enable name LAN_in { rule 100 { action accept description "Default LAN -> any" protocol all source { address 10.0.0.0/24 } } } name LAN_out { } name LOCAL { rule 100 { action accept state { established enable } } } name WAN_in { rule 20 { action accept description "Allow SMTP connections to MX01" destination { address 74.XXX.XXX.XXX port 25 } protocol tcp } rule 100 { action accept description "Allow established connections back through" state { established enable } } } name WAN_out { } receive-redirects disable send-redirects enable source-validation disable syn-cookies enable SIDENOTE To test for open ports I have using this website, http://www.yougetsignal.com/tools/open-ports/, it showed port 25 as open without the firewall rules and closed with the firewall rules. UPDATE Just to see if the firewall was working properly I made a rule to block SSH from the WAN interface. When I checked for port 22 on my primary WAN address it said it was still open even though I outright blocked the port. Here is the rule I used; rule 21 { action reject destination { address 74.219.80.163 port 22 } protocol tcp } So now I am convinced either I am doing something wrong or the firewall is not working like it should.

  Read the article

• OpenVPN/Tunnelblick through wireless router, no connection.

  - by Oscar

  I'm using OpenVPN with Tunneblick on my Macbook Pro to access a server on my job. I't works fine, but i can't get it working with my Netgear WGT624v3 wireless router. I get this warning: WARNING: potential route subnet conflict between local LAN [192.168.1.0/255.255.255.0] and remote VPN [192.168.1.0/255.255.255.0] Someone told me that i should "port forward" on my router, but i can't figure out the right settings. Also not shure i'm doing it right.

  Read the article

• future-proofing java version check in ant script

  - by carneades

  The script provided here gave a great way to check if Ant is using Java 6. <?xml version="1.0" encoding="UTF-8"?> <project name="project" default="default"> <target name="default" depends="javaCheck" if="isJava6"> <echo message="Hello, World!" /> </target> <target name="javaCheck"> <echo message="ant.java.version=${ant.java.version}" /> <condition property="isJava6"> <equals arg1="${ant.java.version}" arg2="1.6" /> </condition> </target> </project> However, I have good reason to think the next person holding my position may not be a Java programmer and I want to make sure the builds don't fail because of Java 7. Is there any way to pick apart a String or otherwise ask for Java 6 or higher?

  Read the article

• MS Dynamics CRM trapping .NET error before I can handle it

  - by clifgriffin

  This is a fun one. I have written a custom search page that provides faster, more user friendly searches than the default Contacts view and also allows searching of Leads and Contacts simultaneously. It uses GridViews bound to SqlDataSources that query filtered views. I'm sure someone will complain that I'm not using the web services for this, but this is just the design decision we made. These GridViews live in UpdatePanels to enable very slick AJAX updates upon search. It's all working great. Nearly ready to be deployed, except for one thing: Some long running searches are triggering an uncatchable SQL timeout exception. [SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.] at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior) at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) at System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) at System.Web.UI.WebControls.DataBoundControl.PerformSelect() at System.Web.UI.WebControls.BaseDataBoundControl.DataBind() at System.Web.UI.WebControls.GridView.DataBind() at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() at System.Web.UI.Control.EnsureChildControls() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) I found that CRM is doing a server.transfer to capture this error because my UpdatePanels started throwing JavaSript errors when this error would occur. I was only able to get the full error message by using the JavaScript debugger in IE. Having found this error, I thought the solution would be simple. I just needed to wrap my databind calls in try/catch blocks to capture any errors. Unfortunately it seems CRM's IIS configuration has the magic ability to capture this error before it ever gets back to my code. Using the debugger I never see it. It never gets to my catch blocks, but it's clearly happening in the SQL Data Source which is clearly (by the stack trace) being triggered by my GridView bind. Any ideas on this? It's driving me crazy. Code Behind (with some irrelevant functions omitted): protected void Page_Load(object sender, EventArgs e) { //Initialize some stuff this.bannerOracle = new OdbcConnection(ConfigurationManager.ConnectionStrings["OracleConnectionString"].ConnectionString); //Prospect default HideProspects(); HideProspectAddressColumn(); //Contacts default HideContactAddressColumn(); //Default error messages gvContacts.EmptyDataText = "Sad day. Your search returned no contacts."; gvProspects.EmptyDataText = "Sad day. Your search returned no prospects."; //New search try { SearchContact(null, -1); } catch { gvContacts.EmptyDataText = "Oops! An error occured. This may have been a timeout. Please try your search again."; gvContacts.DataSource = null; gvContacts.DataBind(); } } protected void txtSearchString_TextChanged(object sender, EventArgs e) { if(!String.IsNullOrEmpty(txtSearchString.Text)) { try { SearchContact(txtSearchString.Text, Convert.ToInt16(lstSearchType.SelectedValue)); } catch { gvContacts.EmptyDataText = "Oops! An error occured. This may have been a timeout. Please try your search again."; gvContacts.DataSource = null; gvContacts.DataBind(); } if (chkProspects.Checked == true) { try { SearchProspect(txtSearchString.Text, Convert.ToInt16(lstSearchType.SelectedValue)); } catch { gvProspects.EmptyDataText = "Oops! An error occured. This may have been a timeout. Please try your search again."; gvProspects.DataSource = null; gvProspects.DataBind(); } finally { ShowProspects(); } } else { HideProspects(); } } } protected void SearchContact(string search, int type) { SqlCRM_Contact.ConnectionString = ConfigurationManager.ConnectionStrings["MSSQLConnectionString"].ConnectionString; gvContacts.DataSourceID = "SqlCRM_Contact"; string strQuery = ""; string baseQuery = @"SELECT filteredcontact.contactid, filteredcontact.new_libertyid, filteredcontact.fullname, 'none' AS line1, filteredcontact.emailaddress1, filteredcontact.telephone1, filteredcontact.birthdateutc AS birthdate, filteredcontact.gendercodename FROM filteredcontact "; switch(type) { case LASTFIRST: strQuery = baseQuery + "WHERE fullname LIKE @value AND filteredcontact.statecode = 0"; SqlCRM_Contact.SelectCommand = strQuery; SqlCRM_Contact.SelectParameters.Add("value", DbType.String, search.Trim() + "%"); break; case LAST: strQuery = baseQuery + "WHERE lastname LIKE @value AND filteredcontact.statecode = 0"; SqlCRM_Contact.SelectCommand = strQuery; SqlCRM_Contact.SelectParameters.Add("value", DbType.String, search.Trim() + "%"); break; case FIRST: strQuery = baseQuery + "WHERE firstname LIKE @value AND filteredcontact.statecode = 0"; SqlCRM_Contact.SelectCommand = strQuery; SqlCRM_Contact.SelectParameters.Add("value", DbType.String, search.Trim() + "%"); break; case LIBERTYID: strQuery = baseQuery + "WHERE new_libertyid LIKE @value AND filteredcontact.statecode = 0"; SqlCRM_Contact.SelectCommand = strQuery; SqlCRM_Contact.SelectParameters.Add("value", DbType.String, search.Trim() + "%"); break; case EMAIL: strQuery = baseQuery + "WHERE emailaddress1 LIKE @value AND filteredcontact.statecode = 0"; SqlCRM_Contact.SelectCommand = strQuery; SqlCRM_Contact.SelectParameters.Add("value", DbType.String, search.Trim() + "%"); break; case TELEPHONE: strQuery = baseQuery + "WHERE telephone1 LIKE @value AND filteredcontact.statecode = 0"; SqlCRM_Contact.SelectCommand = strQuery; SqlCRM_Contact.SelectParameters.Add("value", DbType.String, search.Trim() + "%"); break; case BIRTHDAY: strQuery = baseQuery + "WHERE filteredcontact.birthdateutc BETWEEN @dateStart AND @dateEnd AND filteredcontact.statecode = 0"; try { DateTime temp = DateTime.Parse(search); if (temp.Year < 1753 || temp.Year > 9999) { search = string.Empty; } else { search = temp.ToString("yyyy-MM-dd"); } } catch { search = string.Empty; } SqlCRM_Contact.SelectCommand = strQuery; SqlCRM_Contact.SelectParameters.Add("dateStart", DbType.String, search.Trim() + " 00:00:00.000"); SqlCRM_Contact.SelectParameters.Add("dateEnd", DbType.String, search.Trim() + " 23:59:59.999"); break; case SSN: //Do something break; case ADDRESS: strQuery = @"SELECT contactid, new_libertyid, fullname, line1, emailaddress1, telephone1, birthdate, gendercodename FROM (SELECT FC.contactid, FC.new_libertyid, FC.fullname, FA.line1, FC.emailaddress1, FC.telephone1, FC.birthdateutc AS birthdate, FC.gendercodename, ROW_NUMBER() OVER(PARTITION BY FC.contactid ORDER BY FC.contactid DESC) AS rn FROM filteredcontact FC INNER JOIN FilteredCustomerAddress FA ON FC.contactid = FA.parentid WHERE FA.line1 LIKE @value AND FA.addressnumber <> 1 AND FC.statecode = 0 ) AS RESULTS WHERE rn = 1"; SqlCRM_Contact.SelectCommand = strQuery; SqlCRM_Contact.SelectParameters.Add("value", DbType.String, search.Trim() + "%"); ShowContactAddressColumn(); break; default: strQuery = @"SELECT TOP 500 filteredcontact.contactid, filteredcontact.new_libertyid, filteredcontact.fullname, 'none' AS line1, filteredcontact.emailaddress1, filteredcontact.telephone1, filteredcontact.birthdateutc AS birthdate, filteredcontact.gendercodename FROM filteredcontact WHERE filteredcontact.statecode = 0"; SqlCRM_Contact.SelectCommand = strQuery; break; } if (type != ADDRESS) { HideContactAddressColumn(); } gvContacts.PageIndex = 0; //try //{ // SqlCRM_Contact.DataBind(); //} //catch //{ // SqlCRM_Contact.DataBind(); //} gvContacts.DataBind(); } protected void SearchProspect(string search, int type) { SqlCRM_Prospect.ConnectionString = ConfigurationManager.ConnectionStrings["MSSQLConnectionString"].ConnectionString; gvProspects.DataSourceID = "SqlCRM_Prospect"; string strQuery = ""; string baseQuery = @"SELECT filteredlead.leadid, filteredlead.fullname, 'none' AS address1_line1, filteredlead.emailaddress1, filteredlead.telephone1, filteredlead.lu_dateofbirthutc AS lu_dateofbirth, filteredlead.lu_gendername FROM filteredlead "; switch (type) { case LASTFIRST: strQuery = baseQuery + "WHERE fullname LIKE @value AND filteredlead.statecode = 0"; SqlCRM_Prospect.SelectCommand = strQuery; SqlCRM_Prospect.SelectParameters.Add("value", DbType.String, search.Trim() + "%"); break; case LAST: strQuery = baseQuery + "WHERE lastname LIKE @value AND filteredlead.statecode = 0"; SqlCRM_Prospect.SelectCommand = strQuery; SqlCRM_Prospect.SelectParameters.Add("value", DbType.String, search.Trim() + "%"); break; case FIRST: strQuery = baseQuery + "WHERE firstname LIKE @value AND filteredlead.statecode = 0"; SqlCRM_Prospect.SelectCommand = strQuery; SqlCRM_Prospect.SelectParameters.Add("value", DbType.String, search.Trim() + "%"); break; case LIBERTYID: strQuery = baseQuery + "WHERE new_libertyid LIKE @value AND filteredlead.statecode = 0"; SqlCRM_Prospect.SelectCommand = strQuery; SqlCRM_Prospect.SelectParameters.Add("value", DbType.String, search.Trim() + "%"); break; case EMAIL: strQuery = baseQuery + "WHERE emailaddress1 LIKE @value AND filteredlead.statecode = 0"; SqlCRM_Prospect.SelectCommand = strQuery; SqlCRM_Prospect.SelectParameters.Add("value", DbType.String, search.Trim() + "%"); break; case TELEPHONE: strQuery = baseQuery + "WHERE telephone1 LIKE @value AND filteredlead.statecode = 0"; SqlCRM_Prospect.SelectCommand = strQuery; SqlCRM_Prospect.SelectParameters.Add("value", DbType.String, search.Trim() + "%"); break; case BIRTHDAY: strQuery = baseQuery + "WHERE filteredlead.lu_dateofbirth BETWEEN @dateStart AND @dateEnd AND filteredlead.statecode = 0"; try { DateTime temp = DateTime.Parse(search); if (temp.Year < 1753 || temp.Year > 9999) { search = string.Empty; } else { search = temp.ToString("yyyy-MM-dd"); } } catch { search = string.Empty; } SqlCRM_Prospect.SelectCommand = strQuery; SqlCRM_Prospect.SelectParameters.Add("dateStart", DbType.String, search.Trim() + " 00:00:00.000"); SqlCRM_Prospect.SelectParameters.Add("dateEnd", DbType.String, search.Trim() + " 23:59:59.999"); break; case SSN: //Do nothing break; case ADDRESS: strQuery = @"SELECT filteredlead.leadid, filteredlead.fullname, filteredlead.address1_line1, filteredlead.emailaddress1, filteredlead.telephone1, filteredlead.lu_dateofbirthutc AS lu_dateofbirth, filteredlead.lu_gendername FROM filteredlead WHERE address1_line1 LIKE @value AND filteredlead.statecode = 0"; SqlCRM_Prospect.SelectCommand = strQuery; SqlCRM_Prospect.SelectParameters.Add("value", DbType.String, search.Trim() + "%"); ShowProspectAddressColumn(); break; default: strQuery = @"SELECT TOP 500 filteredlead.leadid, filteredlead.fullname, 'none' AS address1_line1 filteredlead.emailaddress1, filteredlead.telephone1, filteredlead.lu_dateofbirthutc AS lu_dateofbirth, filteredlead.lu_gendername FROM filteredlead WHERE filteredlead.statecode = 0"; SqlCRM_Prospect.SelectCommand = strQuery; break; } if (type != ADDRESS) { HideProspectAddressColumn(); } gvProspects.PageIndex = 0; //try //{ // SqlCRM_Prospect.DataBind(); //} //catch (Exception ex) //{ // SqlCRM_Prospect.DataBind(); //} gvProspects.DataBind(); }

  Read the article

• Python byte per byte XOR decryption

  - by neurino

  I have an XOR encypted file by a VB.net program using this function to scramble: Public Class Crypter ... 'This Will convert String to bytes, then call the other function. Public Function Crypt(ByVal Data As String) As String Return Encoding.Default.GetString(Crypt(Encoding.Default.GetBytes(Data))) End Function 'This calls XorCrypt giving Key converted to bytes Public Function Crypt(ByVal Data() As Byte) As Byte() Return XorCrypt(Data, Encoding.Default.GetBytes(Me.Key)) End Function 'Xor Encryption. Private Function XorCrypt(ByVal Data() As Byte, ByVal Key() As Byte) As Byte() Dim i As Integer If Key.Length <> 0 Then For i = 0 To Data.Length - 1 Data(i) = Data(i) Xor Key(i Mod Key.Length) Next End If Return Data End Function End Class and saved this way: Dim Crypter As New Cryptic(Key) 'open destination file Dim objWriter As New StreamWriter(fileName) 'write crypted content objWriter.Write(Crypter.Crypt(data)) Now I have to reopen the file with Python but I have troubles getting single bytes, this is the XOR function in python: def crypto(self, data): 'crypto(self, data) -> str' return ''.join(chr((ord(x) ^ ord(y)) % 256) \ for (x, y) in izip(data.decode('utf-8'), cycle(self.key)) I had to add the % 256 since sometimes x is 256 i.e. not a single byte. This thing of two bytes being passed does not break the decryption because the key keeps "paired" with the following data. The problem is some decrypted character in the conversion is wrong. These chars are all accented letters like à, è, ì but just a few of the overall accented letters. The others are all correctly restored. I guess it could be due to the 256 mod but without it I of course get a chr exception... Thanks for your support

  Read the article

• How to allow anonymous login in org.apache.ftpserver?

  - by ablmf

  I wrote a little code like this to start an ftp server embedded in my application. It's based on apache ftpserver I found that anonymous user could not login. Client keeps get 530. Do I have add a configure file for ftp? I can not find any API to create a User to add to UserManger. private void start_ftp() throws FtpException { FtpServerFactory serverFactory = new FtpServerFactory(); ListenerFactory factory = new ListenerFactory(); // set the port of the listener factory.setPort(DEF_FTP_PORT); // replace the default listener serverFactory.addListener("default", factory.createListener()); Ftplet fl = new MyFtplet(); Map<String, Ftplet> map_ftplest = new LinkedHashMap<String, Ftplet>(); map_ftplest.put("default", fl); serverFactory.setFtplets(map_ftplest); UserManagerFactory u_factory = new PropertiesUserManagerFactory(); UserManager u_manager = u_factory.createUserManager(); //u_manager. Boolean b = u_manager.doesExist("anonymous"); serverFactory.setUserManager(u_manager); // start the server server = serverFactory.createServer(); server.start(); }

  Read the article

• Can't start the portable version of NetBeans 6.9.1 IDE

  - by Coder

  I downloaded the portable version of netbeans netbeans-6.9.1-201007282301-ml.zip from the netbeans site and changed the config file in etc/netbeans.conf as indicated on the netbeans site. The file contents are below. # ${HOME} will be replaced by JVM user.home system property #netbeans_default_userdir="${HOME}/.netbeans/6.9" netbeans_default_userdir=".netbeans/6.9" # Options used by NetBeans launcher by default, can be overridden by explicit # command line switches: netbeans_default_options="-J-client -J-Xss2m -J-Xms32m -J-XX:PermSize=32m -J-XX:MaxPermSize=200m -J-Dapple.laf.useScreenMenuBar=true -J-Dapple.awt.graphics.UseQuartz=true -J-Dsun.java2d.noddraw=true" # Note that a default -Xmx is selected for you automatically. # You can find this value in var/log/messages.log file in your userdir. # The automatically selected value can be overridden by specifying -J-Xmx here # or on the command line. # If you specify the heap size (-Xmx) explicitely, you may also want to enable # Concurrent Mark & Sweep garbage collector. In such case add the following # options to the netbeans_default_options: # -J-XX:+UseConcMarkSweepGC -J-XX:+CMSClassUnloadingEnabled -J-XX:+CMSPermGenSweepingEnabled # (see http://wiki.netbeans.org/wiki/view/FaqGCPauses) # Default location of JDK, can be overridden by using --jdkhome <dir>: #netbeans_jdkhome="/path/to/jdk" netbeans_jdkhome="C:\Program Files\Java\jdk1.6.0_24\" # Additional module clusters, using ${path.separator} (';' on Windows or ':' on Unix): #netbeans_extraclusters="/absolute/path/to/cluster1:/absolute/path/to/cluster2" # If you have some problems with detect of proxy settings, you may want to enable # detect the proxy settings provided by JDK5 or higher. # In such case add -J-Djava.net.useSystemProxies=true to the netbeans_default_options. But it refuses to start when i try to run it. If i change the JDK path to something incorrect it complains that it can't find the jdk so i think the jdk path is correct. It also creates a .netbeans directory when i try to start it. I don't see any errors and it just doesn't do anything else observable. Does anybody know how to set up this version of netbeans? Thanks.

  Read the article

• SQL Server Compact timed out waiting for a lock

  - by jankhana

  Hi all, I'm having an application in that i use Sql Compact 3.5 with VS2008. I'm running multiple threads in my application which contacts the compact database and accesses the row. It selects and deletes those rows in a fashion i.e selecting and giving to the application 5 rows and deleting those rows from the table. It works great with a single thread but if i use multiple threads i.e if 3 or more threads are running I get very often the TimeOut Error!!! I have increased the Time out property in the connection string but it didn't give me expected result. The error log is as follow: SQL Server Compact timed out waiting for a lock. The default lock time is 2000ms for devices and 5000ms for desktops. The default lock timeout can be increased in the connection string using the ssce: default lock timeout property. [ Session id = 5,Thread id = 4204,Process id = 4808,Table name = XXX,Conflict type = x lock (s blocks),Resource = TAB ] The Query that I use to retrieve is as follows: " select Top(5) * from TableName order by id; delete from TableName where id in(select top(5) id from TableName order by id); " Is there any way by which we can avoid this Time Out exception??????? The above query I un as a transaction in VS2008 one using SQLCECommand and the other using SqlCEDataAdapter. Any Idea!!!!!! Reply

  Read the article

• How to reliably replace a library-defined error handler with my own?

  - by sharptooth

  On certain error cases ATL invokes AtlThrow() which is implemented as ATL::AtlThrowImpl() which in turn throws CAtlException. The latter is not very good - CAtlException is not even derived from std::exception and also we use our own exceptions hierarchy and now we will have to catch CAtlException separately here and there which is lots of extra code and error-prone. Looks like it is possible to replace ATL::AtlThrowImpl() with my own handler - define _ATL_CUSTOM_THROW and define AtlThrow() to be the custom handler before including atlbase.h - and ATL will call the custom handler. Not so easy. Some of ATL code is not in sources - it comes compiled as a library - either static or dynamic. We use the static - atls.lib. And... it is compiled in such way that it has ATL::ThrowImpl() inside and some code calling it. I used a static analysis tool - it clearly shows that there're paths on which the old default handler is called. To ensure I even tried to "reimplement" ATL::AtlThrowImpl() in my code. Now the linker says it sees two declarations of ATL::AtlThrowImpl() which I suppose confirms that there's another implementation that can be called by some code. How can I handle this? How do I replace the default handler completely and ensure that the default handler is never called?

  Read the article

• Replace textfields with dropdown select fields

  - by 47

  I have three model classes that look as below: class Model(models.Model): model = models.CharField(max_length=20, blank=False) manufacturer = models.ForeignKey(Manufacturer) date_added = models.DateField(default=datetime.today) def __unicode__(self): name = ''+str(self.manufacturer)+" "+str(self.model) return name class Series(models.Model): series = models.CharField(max_length=20, blank=True, null=True) model = models.ForeignKey(Model) date_added = models.DateField(default=datetime.today) def __unicode__(self): name = str(self.model)+" "+str(self.series) return name class Manufacturer(models.Model): MANUFACTURER_POPULARITY_CHOICES = ( ('1', 'Primary'), ('2', 'Secondary'), ('3', 'Tertiary'), ) manufacturer = models.CharField(max_length=15, blank=False) date_added = models.DateField(default=datetime.today) manufacturer_popularity = models.CharField(max_length=1, choices=MANUFACTURER_POPULARITY_CHOICES) def __unicode__(self): return self.manufacturer I want to have the fields for model series and manufacturer represented as dropdowns instead of text fields. I have customized the model forms as below: class SeriesForm(ModelForm): series = forms.ModelChoiceField(queryset=Series.objects.all()) class Meta: model = Series exclude = ('model', 'date_added',) class ModelForm(ModelForm): model = forms.ModelChoiceField(queryset=Model.objects.all()) class Meta: model = Model exclude = ('manufacturer', 'date_added',) class ManufacturerForm(ModelForm): manufacturer = forms.ModelChoiceField(queryset=Manufacturer.objects.all()) class Meta: model = Manufacturer exclude = ('date_added',) However, the dropdowns are populated with the unicode in the respective class...how can I further customize this to get the end result I want? Also, how can I populate the forms with the correct data for editing? Currently only SeriesForm is populated. The starting point of all this is from another class whose declaration is as below: class CommonVehicle(models.Model): year = models.ForeignKey(Year) series = models.ForeignKey(Series) .... def __unicode__(self): name = ''+str(self.year)+" "+str(self.series) return name

  Read the article

• Masspay and MySql

  - by Mike

  Hi, I am testing Paypal's masspay using their 'MassPay NVP example' and I having difficulty trying to amend the code so inputs data from my MySql database. Basically I have user table in MySql which contains email address, status of payment (paid,unpaid) and balance. CREATE TABLE `users` ( `user_id` int(10) unsigned NOT NULL auto_increment, `email` varchar(100) collate latin1_general_ci NOT NULL, `status` enum('unpaid','paid') collate latin1_general_ci NOT NULL default 'unpaid', `balance` int(10) NOT NULL default '0', PRIMARY KEY (`user_id`) ) ENGINE=MyISAM AUTO_INCREMENT=6 DEFAULT CHARSET=latin1 COLLATE=latin1_general_ci Data : 1 [email protected] paid 100 2 [email protected] unpaid 11 3 [email protected] unpaid 20 4 [email protected] unpaid 1 5 [email protected] unpaid 20 6 [email protected] unpaid 15 I then have created a query which selects users with an unpaid balance of $10 and above : $conn = db_connect(); $query=$conn->query("SELECT * from users WHERE balance >='10' AND status = ('unpaid')"); What I would like to is for each record returned from the query for it to populate the code below: Now the code which I believe I need to amend is as follows: for($i = 0; $i < 3; $i++) { $receiverData = array( 'receiverEmail' => "[email protected]", 'amount' => "example_amount",); $receiversArray[$i] = $receiverData; } However I just can't get it to work, I have tried using mysqli_fetch_array and then replaced "[email protected]" with $row['email'] and "example_amount" with row['balance'] in various methods of coding but it doesn't work. Also I need it to loop to however many rows that were retrieved from the query as <3 in the for loop above. So the end result I am looking for is for the $nvpStr string to pass with something like this: $nvpStr = "&EMAILSUBJECT=test&RECEIVERTYPE=EmailAddress&CURRENCYCODE=USD&[email protected]&L_Amt=11&[email protected]&L_Amt=11&[email protected]&L_Amt=20&[email protected]&L_Amt=20&[email protected]&L_Amt=15"; Thanks

  Read the article

< Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >