Search Results

Search found 72218 results on 2889 pages for 'multiple definition error'.

Page 226/2889 | < Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >

  • Single space on secondary display?

    - by zoul
    Hello! Is it possible to only have one space on secondary display when using Spaces on Mac? I’d like to have three spaces on the primary display and only use the secondary one as a common “sideboard” that does not change when I switch Spaces on the primary display.

    Read the article

  • Building a video wall with devices

    - by machunter
    I am entertaining building a video wall made out of many android devices. But I have to say I have no clue about how to go about it? The fact that these are android devices is not very important I am curious about the general approach to doing video walls with many separated devices. At best the desktop of one machine should be displayed on all the devices. If not I would be also interested in just showing just a video on that wall.

    Read the article

  • three monitors with radeon 5870 on 1920x 1080

    - by antoniocs
    Hey! I have 3 monitors, 2 24 inch and one 22 inch. The max resolution of the 24 inch monitors is 1920 x 1080 and the 22 is a bit less (can't remember right now). I read Jeff's post about the display port adapters and I was wondering if passive adapter would do the trick since neither of the monitors have big resolutions. Thanks

    Read the article

  • Both screens always stay on after adding second monitor

    - by J.Merrill
    I had a single 1920x1080 monitor on a Windows 7 desktop PC and, per "power management" (not screen saver), the screen would go blank after 10 minutes. I added another monitor (2560x1600 if that matters) and since then, neither screen has ever blanked. I've tried turning on the "blank" screen saver, but that didn't help either -- I can go away for hours and when I come back, both screens are on. I've seen others with similar issues apparently caused by e.g. wireless mice that seem to move infinitesimally, but I've got the same wired mouse I had before. I can't understand why neither the screen saver nor power management is doing what it should to blank the screens, when "power management" used to do it when there was only one monitor. Maybe it doesn't matter so much with current LCD display technology (no "burn in") but doesn't a monitor use more power when "power management" hasn't turned off the display? Thanks for any suggestions.

    Read the article

  • Unable to log in due to freeze, occasional error message

    - by Xianlin Xiong
    I'm new to Ubuntu. And I have some problems now. I downloaded Ubuntu 11.10 and burned it onto a CD. Then I load it in my conputer, it's easy. But when I finished those and restarted the computer, the problem comes: After I choose to log in the Ubuntu system,the screen stays in pink, and it can't jump into (about 30 min), and then I have no choices but to press Ctrl+Alt+Del to reboot. Another time I choose Ubuntu to log in, it shows on the screen that "BusyBox v1.18.4 ...... built-in shell ...... initramfs". However the Live CD works very well. What’s more, there is a Windows 7 partition on the hard drive. (Windows 7 is also okay.) But I leave more than 20GB on the hard drive to Ubuntu. When I installed Ubuntu, I only made two partitions (swap and /). I don’t know where the problems happened and how to deal with them. And I hope someone can help me out with the troubles.

    Read the article

  • How can use mod_rewrite to redirect a multiple specific URLs containing multiple query strings?

    - by Derek
    Hi there folks, we recently migrated a site from a custom CMS to drupal. In an effort to preserve some links that our users bookmarked (we have about 120 redirects) we would like to forward the original URLs to a new URL. I have been searching for a couple days, but can't seem to find anything simple to what I need. We have existing URLS that contain one or more query strings, for example: /article.php?issue_id=12&article_id=275 and we would like to forward to the new location: http://foobar.edu/content/super-happy-fun-article I started using: RewriteEngine On RewriteRule ^/article\.php?issue_id=12&article_id=275$ http://foobar.edu/content/super-happy-fun-article [R=301,L] This, however, does not work. A simple RewriteRule works: RewriteRule ^test\.php$ index.php It is unclear to me how I need to use {QUERY_STRING} with multiple Basically it's 120 simple redirects that go from one existing URL to a new one. I don't need ranges [0-9], because there is no sequential order to existing URLs. Perhaps I can do what I need with RewriteMap and a simple text file that contains a line like this: index.php?issue_id=12&articleType_section=0&articleType_id=65 http://foobar.edu/category/fall-2008 If anyone has any idea on using mod_rewrite to accomplish this or if there is a better, or more simple mod, I am open to that as well. Thanks!

    Read the article

  • Resume Button error

    - by user3178359
    i have two class. if i press button pause it can show button resume, retry,menu and the game time is paused. but when i press the resume the game time still paused. help me plase how to continue the game time ?? code for button pause : using UnityEngine; using System.Collections; public class pause : MonoBehaviour { public GUITexture showMenu; public GUITexture btnResume; public bool gamePaused = false; void OnMouseDown() { gamePaused = true; Time.timeScale = 0; showMenu.pixelInset = new Rect(220, 200, showMenu.pixelInset.width, showMenu.pixelInset.height); btnResume.pixelInset = new Rect(300, 300, btnResume.pixelInset.width, btnResume.pixelInset.height); code for button resume : using UnityEngine; using System.Collections; public class btResume : pause { //public GUITexture shoe; void onMouseDown() { base.gamePaused = false; Time.timeScale = 1; btnResume.pixelInset = new Rect(300, -300, btnResume.pixelInset.width, btnResume.pixelInset.height); showMenu.pixelInset = new Rect(220, -200, showMenu.pixelInset.width, showMenu.pixelInset.height); } }

    Read the article

  • Error in batch file to copy folder: 'Invalid number of parameters'

    - by Daniel
    I am making a batch file in Windows XP to copy my folders I need to another folder on my PC. I am getting an error. I get the error "Invalid number of parameters". xcopy /s/z D:\Documents and Settings\%username%\Desktop C:\SomeRandomFolder\ xcopy /s/z D:\Documents and Settings\%username%\Favorites C:\SomeRandomFolder\ xcopy /s/z D:\Documents and Settings\%username%\Start Menu C:\SomeRandomFolder\ xcopy /s/z D:\Documents and Settings\%username%\My Documents C:\SomeRandomFolder\ xcopy /s/z D:\Documents and Settings\%username%\PrintHood C:\SomeRandomFolder\ xcopy /s/z D:\Documents and Settings\%username%\NetHood C:\SomeRandomFolder\ xcopy /s/z D:\Documents and Settings\%username%\Templates C:\SomeRandomFolder\ xcopy /s/z D:\Documents and Settings\%username%\Searches C:\SomeRandomFolder\ xcopy /s/z D:\Documents and Settings\%username%\Local Settings\Application Data\Microsoft\Outlook C:\SomeRandomFolder\ pause Then I changed the batch and get this error: "File not found - Desktop" xcopy /s/z D:\...\%username%\Desktop C:\SomeRandomFolder\ pause How do I fix these errors?

    Read the article

  • Why do people like widescreen when it is, de facto, less space?

    - by Kerry
    I find that many of my friends/non-programmers or designers like widescreens. It makes very little sense to me as you in fact have less space than a 4:3 (do the math). The closer to a perfect square the more space you actually have on your screen. I got a 21" 16:9 and two 19" 4:3 The 21" is nearly the same height, but I think its a tenth of an inch shorter if I'm correct. I forget the calculation but it is nearly the same actual space. I can understand if you're using your computer for constant movie-watching but I think that's more of people's "ideal" than a reality. Thoughts?

    Read the article

  • Tracking 502 bad gateway error

    - by dasickle
    I moved my Wordpress site to WP Engine and now I constantly get 502 errors. I spoke with support and they said that its because I have a lot of DB queries. I ran some tests and my frontpage only has 95 queries and page size is about 500kb. Most inner pages are around 60 queries. All queries are very short. Some people tell me its common with WP Engine because they run nginx. Why do I keep getting these errors and is there a way to track how many of them happen on daily basis? P.S. WP Engine log is empty so cant see the 502's there.

    Read the article

  • WSS - Server Error in "/" Application. Compilation Error Message: CS1006: Could not write to output

    - by ptahiliani
    I got the above errror when I tried to run WSS default site after installing and running the Advance System Optimizer 3.o. I resolve this by going to the following locations and adding permission for the admin users accounts (ASP.NET & IIS_WPG) I have set up for Sharepoint. C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files C:\WINDOWS\System 32\Log Files C:\WINDOWS\Temp After the correct permissions have been added, Sharepoint works as normal.

    Read the article

  • Reverse Proxy to filter out js files from multiple hosts in nginx

    - by stwissel
    I have a website http://someplace.acme.com that I want my users to access via http://myplace.mycorp.com - pretty standard reverse proxy setup. The special requirement: any js file - either identified by the .js extension and/or the mime-type (if that is possible) text/javascript needs to be served from a different location, a local tool that inspects the js for potential threats. So I have location / { proxy_pass http://someplace.acme.com; proxy_next_upstream error timeout invalid_header http_500 http_502 http_503 http_504; proxy_redirect off; proxy_buffering off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } location ~* \.(js)$ { proxy_pass http://127.0.0.1:8188/filter?source=$1; proxy_redirect off; proxy_buffering off; } The JS still is served from remote and I have no idea how to check for the mime type. What do I miss?

    Read the article

  • How to disable monitor auto detection in Windows 7?

    - by Jay Yother
    I am currently running Windows 7 Ultimate 64-bit with a dual monitor setup with an NVIDIA 7950 GT graphics card. One monitor is dedicated to this machine and the other monitor is connected to a DVI KVM switch. When I switch to my other computer, Windows 7 disables the monitor. However, when I switch back it does not re-enable the monitor. The only circumstance that automatically re-enables the second monitor is when I switch back after Windows has put the monitors into power save mode. I am continually having to bring up the NVIDIA control panel to have it re-enable the monitor. Under Windows XP I would just disable the NVIDIA service to prevent it from auto-detecting the monitor (which doesn't solve the problem under Win7), and in Vista there was a registry hack that would prevent this. It looks as though that has been removed in Windows 7. I have found similar questions posted on this site, but nothing that matches my problem exactly. The following link is the question that comes the closest, but does not provide a solution to the problem. http://superuser.com/questions/96683/how-to-fix-monitor-detection-on-windows-7 Is there a way in Windows 7 to disable monitor auto-detection? Update: I just added a second graphics card to my Windows 7 64-bit machine. I plugged one monitor into each graphics card. Now, when I use the KVM switch to switch back and forth it will re-enable the second monitor like it should. There are however, a few quirks with this. If I have a program maximized on the second monitor and it has focus, when I switch it will move to monitor 1. If I have a program maximized on the second monitor and it does not have focus, when I switch it will behave like it is minimized and when I bring it back up it will show up maximized on monitor 1. Definitely better than it was, but still looking for a way to disable the auto-detection.

    Read the article

  • Triple monitor setup in linux

    - by Brendan Abel
    I'm hoping there are some xorg gurus out there. I'm trying to get a three monitor setup working in linux. I have 2 lcd monitors and a tv, all different resolutions. I'm using 2 video cards; a 9800 GTX and 7900Gt. I've seen a lot of different posts about people trying to make this work, and in every case, they either gave up, or Xinerama magically solved all their problems. Basically, my main problem is that I cannot get Xinerama to work. Every time I turn it on in the options, my machine gets stuck in a neverending boot cycle. If I disable Xinerama, I just have three Xorg screens, but I can't drag windows from one to the other. I can get the 2 lcds on Twinview, and the tv on a separate Xorg screen no problem. But I don't really like this solution. I'd rather have them all on separate screens and stitch them together with Xinerama. Has anyone done this? Here's my xorg.conf for reference. p.s. This took me all of 30 seconds to set up in Windows XP! p.s.s. I've seen somewhere that maybe randr can solve my problems? But I'm not quite sure how? Section "Monitor" Identifier "Main1" VendorName "Acer" ModelName "H233H" HorizSync 40-70 VertRefresh 60 Option "dpms" EndSection #Section "Monitor" # Identifier "Main2" # VendorName "Acer" # ModelName "AL2216W" # HorizSync 40-70 # VertRefresh 60 # Option "dpms" #EndSection Section "Monitor" Identifier "Projector" VendorName "BenQ" ModelName "W500" HorizSync 44.955-45 VertRefresh 59.94-60 Option "dpms" EndSection Section "Device" Identifier "Card1" Driver "nvidia" VendorName "nvidia" BusID "PCI:5:0:0" BoardName "nVidia Corporation G92 [GeForce 9800 GTX+]" Option "ConnectedMonitor" "DFP,DFP" Option "NvAGP" "0" Option "NoLogo" "True" #Option "TVStandard" "HD720p" EndSection Section "Device" Identifier "Card2" Driver "nvidia" VendorName "nvidia" BusID "PCI:4:0:0" BoardName "nVidia Corporation G71 [GeForce 7900 GT/GTO]" Option "NvAGP" "0" Option "NoLogo" "True" Option "TVStandard" "HD720p" EndSection Section "Module" Load "glx" EndSection Section "Screen" Identifier "ScreenMain-0" Device "Card1-0" Monitor "Main1" DefaultDepth 24 Option "Twinview" Option "TwinViewOrientation" "RightOf" Option "MetaModes" "DFP-0: 1920x1080; DFP-1: 1680x1050" Option "HorizSync" "DFP-0: 40-70; DFP-1: 40-70" Option "VertRefresh" "DFP-0: 60; DFP-1: 60" #SubSection "Display" # Depth 24 # Virtual 4880 1080 #EndSubSection EndSection Section "Screen" Identifier "ScreenProjector" Device "Card2" Monitor "Projector" DefaultDepth 24 Option "MetaModes" "TV-0: 1280x720" Option "HorizSync" "TV-0: 44.955-45" Option "VertRefresh" "TV-0: 59.94-60" EndSection Section "ServerLayout" Identifier "BothTwinView" Screen "ScreenMain-0" Screen "ScreenProjector" LeftOf "ScreenMain-0" #Option "Xinerama" "on" # most important option let you window expand to three monitors EndSection

    Read the article

  • Third monitor with AMD cards WITHOUT Eyefinity

    - by Resorath
    I have two AMD Radeon HD 6870 video cards in CrossFireX configuration and I would like to add a third monitor. I understand to use "Eyefinity" you need to use an active mini displayport to DVI adapter. I am not interested in the benefits of "Eyefinity", I just want a third monitor with Windows extended desktop. Is it possible to use either the HDMI head on the first card or the DVI heads from the second card to get a third monitor running without "Eyefinity" and an active adapter?

    Read the article

  • Maximum number of monitors Win 7 Supports?

    - by cpuguru
    I want to set up a system with (9) monitors arranged in a 3x3 grid. Is this configuration possible with Windows 7? Does it max out at a set number of monitors? Any suggestions about known working hardware combinations would be much appreciated. Currently considering (3) nVidia Quadro NVS420 cards to drive the array.

    Read the article

  • IIS6 can't find site on local network

    - by chezy525
    I have a windows 2003 server with dual NICs running IIS6. I can access everything remotely, but the internal network can't seem to find the site regardless of which IP Address I try to go to. There are really several weird things that are happening here, but I'm going to limit this question to what I'm guessing to be the simplest problem (the solution to which I'm hoping solves other things as well): From the server itself, I can access the webpage using the primary IP address (i.e. http://192.168.1.2/index.htm), but not using the secondary IP address (i.e. http://10.10.10.2/index.htm). Self pinging both IP addresses works, and the "Web site identification" in IIS has the IP address set to "(All Unassigned)"... which I believe should bind both IP addresses to this site. I apologize if I'm not providing enough details about my setup, but at this point I don't even know what's relevant...

    Read the article

  • How to get monitor resolution of 1680x1050 using ATI Radeon HD 2600 PRO in a dual monitor setup

    - by user7651
    I have Sapphire ATI Radeon HD 2600 PRO graphics card in my Windows Server 2008 x64 machine. It has two outputs a VGA and a DVI. I have connected the DVI to my Dell 24" monitor with 1900x1200 resolution and it works 100%. The VGA I have connected to my second monitor a Samsung 22" with native resolution of 1680x1050. But the ATI driver and Catalyst control centre doesn't show this resolution as an option. If I choose a lower resolution like 1280x1024 it looks really bad and fuzzy. I searched in google and downloaded the powerstrip tool that allowed me to create a custom resolution of 1680x1050 and then this option shows up in Catalyst control centre and my 2nd monitor works fine now. But I don't want to pay for an application to choose a display resolution. Why doesn't ATI show me that option by default even though it has no problem in actually supporting the display at resolution. Is there a way to get 1680x1050 resolution using ATI drivers only ?

    Read the article

  • How do I move an Amazon micro instance to a small instance?

    - by Navetz
    I want to move my instance to a micro instance to a small instance but when I try to launch a new AMI based on my Micro instance AMI it only gives me the option for 64 bit instances. My initial ami is based off an ubuntu 10.04 image. Is it not possible to move between 64 bit and 32 bit instance? Would it be possible to use a load balancer to have a 32bit instance and a 64bit instance work together? I have a website/web app that I will be uploading huge volumes of data to. I will be starting with 65gigs of images and then moving up to 100+ gigs of images. I am not sure which instance type would be best for this. I was going to use a load balancer and auto scaling to increase the number of instance when the load is high. Also when using a load balancer, does one of the AMI instance become the primary image and the rest act as clones of it?

    Read the article

  • How to switch off the monitor when mouse reaches the edge of the screen?

    - by evgeny9
    I have 2 computers at home (Windows XP and Windows 7), but one monitor for both of them. They are connected to this monitor using different interfaces: DVI and VGA. I'm also using one keyboard and one mouse to control both PCs with the help of Synergy or Input Director. But I still need to manually switch between monitor interfaces. I wonder, if there's some way (software) that will switch this interfaces (turn off the monitor), when reach the edge of the screen with the mouse. Until now I found several answers, which help to avoid pressing hardware buttons, but still can not do the job automatically based on mouse pointer coordinates. Thank you.

    Read the article

  • Setting up a copy of a site with IIS 7?

    - by SJaguar13
    I have a site running on IIS with a dyndns.org domain that points to the IP of the Windows 2008 machine hosting it. I need a copy of that site for development purposes. I set up another folder with all the files, and create a new site in IIS. I don't really have a domain for it, so I was just going to use the IP address. When I go to localhost, 127.0.0.1, or the internal IP, I get bad hostname. If I use the IP address on port 80 (the same as the real version of the site), I get 404 not found. If I use a different port so I don't have them both on the same IP with the same port, I get connection timed out. How do I go about setting this up?

    Read the article

  • Splitting an HTTP request into multiple byte-range requests

    - by redpola
    I have arrived at the unusual situation of having two completely independent Internet connections to my home. This has the advantage of redundancy etc but the drawback that both connections max out at about 6Mb/s. So one individual outbound http request is directed by my "intelligent gateway" (TP-LINK ER6120) out over one or the other connection for its lifetime. This works fine over complex web pages and utilises both external connects fine. However, single-http-request downloads are limited to the maximum rate of one of the two connections. So I'm thinking, surely I can setup some kind of proxy server to direct all my http requests to. For each incoming http request, the proxy server will issue multiple byte-range requests for the desired data and manage the reassembly and delivery of that data to the client's request. I can see this has some overhead, and also some edge cases where there will be blocking problems waiting for data. I also imagine webmasters of single-servers would rather I didn't hit them with 8 byte-range requests instead of one request. How can I achieve this http request deconstruct/reconstruction? Or am I just barking mad?

    Read the article

< Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >