Search Results

Search found 7085 results on 284 pages for 'termine updates'.

Page 226/284 | < Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >

• Should I be relying on WebTests for data validation?

  - by Alexander Kahoun

  I have a suite of web tests created for a web service. I use it for testing a particular input method that updates a SQL Database. The web service doesn't have a way to retrieve the data, that's not its purpose, only to update it. I have a validator that validates the response XML that the web service generates for each request. All that works fine. It was suggested by a teammate that I add data validation so that I check the database to see the data after the initial response validator runs and compare it with what was in the input request. We have a number of services and libraries that are separate from the web service I'm testing that I can use to get the data and compare it. The problem is that when I run the web test the data validation always fails even when the request succeeds. I've tried putting the thread to sleep between the response validation and the data validation but to no avail; It always gets the data from before the response validation. I can set a break point and visually see that the data has been updated in the DB, funny thing is when I step through it in debug with the breakpoint it does validate successfully. Before I get too much more into this issue I have to ask; Is this the purpose of web tests? Should I be able to validate data through service calls in this manner or am I asking too much of a web test and the response validation is as far as I should go?

  Read the article

• SQL (mySQL) update some value in all records processed by a select

  - by jdmuys

  I am using mySQL from their C API, but that shouldn't be relevant. My code must process records from a table that match some criteria, and then update the said records to flag them as processed. The lines in the table are modified/inserted/deleted by another process I don't control. I am afraid in the following, the UPDATE might flag some records erroneously since the set of records matching might have changed between step 1 and step 3. SELECT * FROM myTable WHERE <CONDITION>; # step 1 <iterate over the selected set of lines. This may take some time.> # step 2 UPDATE myTable SET processed=1 WHERE <CONDITION> # step 3 What's the smart way to ensure that the UPDATE updates all the lines processed, and only them? A transaction doesn't seem to fit the bill as it doesn't provide isolation of that sort: a recently modified record not in the originally selected set might still be targeted by the UPDATE statement. For the same reason, SELECT ... FOR UPDATE doesn't seem to help, though it sounds promising :-) The only way I can see is to use a temporary table to memorize the set of rows to be processed, doing something like: CREATE TEMPORARY TABLE workOrder (jobId INT(11)); INSERT INTO workOrder SELECT myID as jobId FROM myTable WHERE <CONDITION>; SELECT * FROM myTable WHERE myID IN (SELECT * FROM workOrder); <iterate over the selected set of lines. This may take some time.> UPDATE myTable SET processed=1 WHERE myID IN (SELECT * FROM workOrder); DROP TABLE workOrder; But this seems wasteful and not very efficient. Is there anything smarter? Many thanks from a SQL newbie.

  Read the article

• JVM/CLR Source-compatible Language Options

  - by Nathan Voxland

  I have an open source Java database migration tool (http://www.liquibase.org) which I am considering porting to .Net. The majority of the tool (at least from a complexity side) is around logic like "if you are adding a primary key and the database is Oracle use this SQL. If database is MySQL use this SQL. If the primary key is named and the database is Postgres use this SQL". I could fork the Java codebase and covert it (manually and/or automatically), but as updates and bug fixes to the above logic come in I do not want to have to apply it to both versions. What I would like to do is move all that logic into a form that can be compiled and used by both Java and .Net versions naively. The code I am looking to convert does not contain any advanced library usage (JDBC, System.out, etc) that would vary significantly from Java to .Net, so I don't think that will be an issue (at worst it can be designed around). So what I am looking for is: A language in which I can code common parts of my app in and compile it into classes usable by the "standard" languages on the target platform Does not add any runtime requirements to the system Nothing so strange that it scares away potential contributors I know Python and Ruby both have implementations on for the JVM and CLR. How well do they fit my requirements? Has anyone been successful (or unsuccesful) using this technique for cross-platform applications? Are there any gotcha's I need to worry about?

  Read the article

• Automate the signature of the update.rdf manifest for my firefox extension

  - by streetpc

  Hello, I'm developing a firefox extension and I'd like to provide automatic update to my beta-testers (who are not tech-savvy). Unfortunately, the update server doesn't provide HTTPS. According to the Extension Developer Guide on signing updates, I have to sign my update.rdf and provide an encoded public key in the install.rdf. There is the McCoy tool to do all of this, but it is an interactive GUI tool and I'd like to automate the extension packaging using an Ant script (as this is part of a much bigger process). I can't find a more precise description of what's happening to sign the update.rdf manifest than below, and McCoy source is an awful lot of javascript. The doc says: The add-on author creates a public/private RSA cryptographic key pair. The public part of the key is DER encoded and then base 64 encoded and added to the add-on's install.rdf as an updateKey entry. (...) Roughly speaking the update information is converted to a string, then hashed using a sha512 hashing algorithm and this hash is signed using the private key. The resultant data is DER encoded then base 64 encoded for inclusion in the update.rdf as an signature entry. I don't know well about DER encoding, but it seems like it needs some parameters. So would anyone know either the full algortihm to sign the update.rdf and install.rdf using a predefined keypair, or a scriptable alternative to McCoy whether a command-line tool like asn1coding will suffise a good/simple developer tutorial on DER encoding

  Read the article

• PowerShell: How to find and uninstall a MS Office Update

  - by Hank

  I've been hunting for a clean way to uninstall an MSOffice security update on a large number of workstations. I've found some awkward solutions, but nothing as clean or general like using PowerShell and get-wmiobject with Win32_QuickFixEngineering and the .Uninstall method on the resulting object. [Apparently, Win32_QuickFixEngineering only refers to Windows patches. See: http://social.technet.microsoft.com/Forums/en/winserverpowershell/thread/93cc0731-5a99-4698-b1d4-8476b3140aa3 ] Question 1: Is there no way to use get-wmiobject to find MSOffice updates? There are so many classes and namespaces, I have to wonder. This particualar Office update (KB978382) can be found in the registry here (for Office Ultimate): HKLM\Software\Microsoft\Windows\CurrentVersion\Uninstall\{91120000-002E-0000-0000-0000000FF1CE}_ULTIMATER_{6DE3DABF-0203-426B-B330-7287D1003E86} which kindly shows the uninstall command of: msiexec /package {91120000-002E-0000-0000-0000000FF1CE} /uninstall {6DE3DABF-0203-426B-B330-7287D1003E86} and the last GUID seems constant between different versions of Office. I've also found the update like this: $wu = new-object -com "Microsoft.Update.Searcher" $wu.QueryHistory(0,$wu.GetTotalHistoryCount()) | where {$_.Title -match "KB978382"} I like this search because it doesn't require any poking around in the registry, but: Question 2: If I've found it like this, what can I do with the found information to facilitate the Uninstall? Thanks

  Read the article

• PLKs and Web Service Software Factory

  - by Nix

  We found a bug in Web Service Software Factory a description can be found here. There has been no updates on it so we decided to download the code and fix it ourself. Very simple bug and we patched it with maybe 3 lines of code. However* we have now tried to repackage it and use it and are finding that this is seemingly an impossible process. Can someone please explain to me the process of PLKs? I have read all about them but still don't understand what is really required to distribute a VS package. I was able to get it to load and run using a PLK obtained from here, but i am assuming that you have to be a partner to get a functional PLK that will be recognized on other peoples systems? Every time i try and install this on a different computer I get a "Package Load Failure". Is the reason I am getting errors because I am not using a partner key? Is there any other way around this? For instance is there any way we can have an "internal" VS package that we can distribute? Edit Files I had to change to get it to work. First run devenv PostInstall.proj Generate your plks and replace ##Package PLK## (.resx files) --Just note that package version is not the class name but is "Web Service Software Factory: Modeling Edition" -- And you need to remove the new lines from the key ProductDefinitionRegistryFragment.wxi line 1252(update version to whatever version you used in plk) Uncomment all // [VSShell::ProvideLoadKey("Standard", Constant in .tt files.

  Read the article

• Passing viewmodel to actionresult creates new viewmodel

  - by Jonas Bohez

  I am using a viewmodel, which i then when to send to an actionresult to use (the modified viewmodel) But in the controller, i lose the list and objects in my viewmodel. This is my view: @using PigeonFancier.Models @model PigeonFancier.Models.InschrijvingModel @using (Html.BeginForm("UpdateInschrijvingen","Melker",Model)) { <div> <fieldset> <table> @foreach (var item in Model.inschrijvingLijst) { <tr> <td>@Html.DisplayFor(model => item.Duif.Naam)</td> <td> @Html.CheckBoxFor(model => item.isGeselecteerd)</td> </tr> } </table> <input type="submit" value="Wijzigen"/> </fieldset> </div> } This is my controller, which does nothing at the moment until i can get the full viewmodel back from the view. public ActionResult UpdateInschrijvingen(InschrijvingModel inschrijvingsModel) { // inschrijvingsModel is not null, but it creates a new model before it comes here with //Use the model for some updates return RedirectToAction("Inschrijven", new { vluchtId = inschrijvingsModel.vlucht.VluchtId }); } This is the model with the List and some other objects who become null because it creates a new model when it comes back from the view to the actionresult public class InschrijvingModel { public Vlucht vlucht; public Duivenmelker duivenmelker; public List<CheckBoxModel> inschrijvingLijst { get; set; } public InschrijvingModel() { // Without this i get, No parameterless constructor defined exception. // So it uses this when it comes back from the view to make a new model } public InschrijvingModel(Duivenmelker m, Vlucht vl) { inschrijvingLijst = new List<CheckBoxModel>(); vlucht = vl; duivenmelker = m; foreach (var i in m.Duiven) { inschrijvingLijst.Add(new CheckBoxModel(){Duif = i, isGeselecteerd = i.IsIngeschrevenOpVlucht(vl)}); } } What is going wrong and how should i fix this problem please? Thanks

  Read the article

• Reloading a JTree during runtime

  - by Patrick Kiernan

  I create a JTree and model for it out in a class separate to the GUI class. The data for the JTree is extracted from a file. Now in the GUI class the user can add files from the file system to an AWT list. After the user clicks on a file in the list I want the JTree to update. The variable name for the JTree is schemaTree. I have the following code for the when an item in the list is selected: private void schemaListItemStateChanged(java.awt.event.ItemEvent evt) { int selection = schemaList.getSelectedIndex(); File selectedFile = schemas.get(selection); long fileSize = selectedFile.length(); fileInfoLabel.setText("Size: " + fileSize + " bytes"); schemaParser = new XSDParser(selectedFile.getAbsolutePath()); TreeModel model = schemaParser.generateTreeModel(); schemaTree.setModel(model); } I've updated the code to correspond to the accepted answer. The JTree now updates correctly based on which file I select in the list.

  Read the article

• Mode specific key bindings

  - by rejeep

  Hey, I have a minor mode that also comes with a global mode. The mode have some key bindings and I want the user to have the posibility to specify what bindings should work for each mode. (my-minor-mode-bindings-for-mode 'some-mode '(key1 key2 ...)) (my-minor-mode-bindings-for-mode 'some-other-mode '(key3 key4 ...)) So I need some kind of mode/buffer-local key map. Buffer local is a bit problematic since the user can change the major mode. I have tried some solutions of which neither works any good. Bind all possible keys always and when the user types the key, check if the key should be active in that mode. Execute action if true, otherwise fall back. Like the previous case only that no keys are bound. Instead I use a pre command hook and check if the key pressed should do anything. For each buffer update (whatever that means), run a function that first clears the key map and then updates it with the bindings for that particular mode. I have tried these approaches and I found problems with all of them. Do you know of any good way to solve this? Thanks!

  Read the article

• Enterprise Eclipse Provisioning - Or - How to share your standard Eclipse setup with other developer

  - by nikhil

  We use Eclipse as the IDE for developing all sorts of Java/J2EE applications in our 150 people odd IT department. One of the common problems we have been seeing is that developers download and install different versions of Eclipse and plugins based on their personal likes and dislikes. We have been trying to bring some consistency to this and have standardized on the version and the plugins that developers should be using. So the problem now is how do we distribute this installation to the team. We have zipped the directories and shared it through a shared drive. But I am looking for a better solution using some kind of provisioning tool for Eclipse using which people can install the IDE or get updates. Has anyone faced this problem? What are your solutions to this? How do you ensure a standard Eclipse environment across developers? I found Yoxos as a potential solution to this. Does anyone have any experience with it? Can p2 be used to do this?

  Read the article

• How you would you describe the Observer pattern in beginner language?

  - by Sheldon

  Currently, my level of understanding is below all the coding examples on the web about the Observer Pattern. I understand it simply as being almost a subscription that updates all other events when a change is made that the delegate registers. However, I'm very unstable in my true comprehension of the benefits and uses. I've done some googling, but most are above my level of understanding. I'm trying to implement this pattern with my current homework assignment, and to truly make sense on my project need a better understanding of the pattern itself and perhaps an example to see what its use. I don't want to force this pattern into something just to submit, I need to understand the purpose and develop my methods accordingly so that it actually serves a good purpose. My text doesn't really go into it, just mentions it in one sentence. MSDN was hard for me to understand, as I'm a beginner on this, and it seems more of an advanced topic. How would you describe this Observer pattern and its uses in C# to a beginner? For an example, please keep code very simple so I can understand the purpose more than complex code snippets. I'm trying to use it effectively with some simple textbox string manipulations and using delegates for my assignment, so a pointer would help!

  Read the article

• Git push current branch to a remote with Heroku

  - by cmaughan

  I'm trying to create a staging branch on Heroku, but there's something I don't quite get. Assuming I've already created a heroku app and setup the remote to point to staging-remote, If I do: git checkout -b staging staging-remote/master I get a local branch called 'staging' which tracks staging-remote/master - or that's what I thought.... But: git remote show staging-remote Gives me this: remote staging Fetch URL: [email protected]:myappname.git Push URL: [email protected]:myappname.git HEAD branch: master Remote branch: master tracked Local branch configured for 'git pull': staging-remote merges with remote master Local ref configured for 'git push': master pushes to master (up to date) As you can see, the pull looks reasonable, but the default push does not. It implies that if I do: git push staging-remote I'm going to push my local master branch up to the staging branch. But that's not what I want.... Basically, I want to merge updates into my staging branch, then easily push it to heroku without having to specify the branch like so: git push staging-remote mybranch:master The above isn't hard to do, but I want to avoid accidentally doing the previous push and pushing the wrong branch... This is doubly important for the production branch I'd like to create! I've tried messing with git config, but haven't figured out how to get this right yet...

  Read the article

• Need advice on using Grails and Ajax to append to a div like in Rails

  - by Nate

  I'm just starting out in Grails and need some advice on using Ajax. I want to append some html to the bottom of a div inside a form. This is basically what I have: -form- -div id="listOfchildren"- childrow 1 input fields childrow 2 input fields childrow 3 input fields -/div- -form- -a-Add Child 4-/a- When I click on the "Add Child" I want to make an ajax call that results in a new childrow getting inserted into the "listOfchildren" div. So the document would look like this: -form- -div id="listOfchildren"- childrow 1 input fields childrow 2 input fields childrow 3 input fields childrow 4 input fields -/div- -form- -a-Add Child 5-/a- In Rails I would do something simple like this: render :update do |page| page.insert_html :bottom, "list_of_children", :partial = child_partial page.replace "add_link", :partial = 'add_link' end The previous code sends an javascript back to the browser with two commands. The first command tells the browser to append some html to the bottom of a div. The second command updates the "add link" counter. In grails I can only see how to replace an entire div (which would wipe out the user's existing input) and I don't see how I can call multiple functions from the ajax response. I can probably do this if I was to write some javascript functions in prototype or whatever, but I'd like to avoid that if there is a simpler way. Thanks! Nate

  Read the article

• PHP IF condition advise needed

  - by Jose David Garcia Llanos

  I'm using emails as username to login into a site being developed, now if a user updates their email from the profile page, how can i make sure that my email checking statement doesnt catch the user's email as already registered in the database. the page /* Now we will store the values submitted by form in variable */ $fullname=$_POST['fullname']; $dob=$_POST['dob']; $address=$_POST['address']; $myusername=$_POST['myusername']; $telephone=$_POST['telephone']; $queryuser=mysql_query("SELECT * FROM customer WHERE email='$myusername' "); $checkuser=mysql_num_rows($queryuser); if($checkuser != 0) { $Merr[]='&raquo; Sorry this email is already registered!'; } else {$insert_user=mysql_query("UPDATE CUSTOMER SET SYNTAX HERE"); Now these are the fields in question; (name, dob, address, email, telephone) VALUES ('$fullname', '$dob', '$address', '$myusername', '$telephone') As you can see if the user changes the login email then the syntax checks for the email being submitted against the database, however if the user leaves the email unchanged he will get the error because it is found in the database. I was thinking of something like; if($checkuser != 0) { if($myusername == $_POST['myusername']) (...dont show error.) but my php skills are limited. can anyone advise please, thanks

  Read the article

• ASP.NET MVC Facebook

  - by durilai

  I am trying to do a seemingly simple thing, but having trouble accomplishing it. I am trying to automate the posting on my Facebook wall. Basically I have a ASP.NET MVC website that I post updates on, and I want to automatically submit the post to my wall. I see a lot of stuff on FB Connect and getting data, I just want to post. Thanks for any help or guidance. UPDATE: Just trying to resurrect, and be a little more clear in my description as I am not getting anywhere. I have a page that I want with a text box and a button. When I submit the form I want the message to post to my Facebook wall. I thought it was Facebook Connect, but I am getting no where as to how to automatically authenticate myself and post to my wall. I would like to use C# rather than JavaScript. private const string ApplicationKey = "XXXXXXXXXXXXXXXXXXXXXXXXXXXX"; private const string SecretKey = "XXXXXXXXXXXXXXXXXXXXXXXXXX"; private Facebook.Rest.Api _facebookAPI; private Facebook.Session.ConnectSession _connectSession; [AcceptVerbs(HttpVerbs.Post)] public ActionResult Index(FormCollection form) { _connectSession = new Facebook.Session.ConnectSession(ApplicationKey, SecretKey); if (_connectSession.IsConnected()) { _facebookAPI = new Facebook.Rest.Api(_connectSession); string response = _facebookAPI.Stream.Publish("This is a generated test"); } return View(); } } The IsConnected() is returning false. Any help is appreciated.

  Read the article

• C# Thread-safe Extension Method

  - by Wonko the Sane

  Hello All, I may be waaaay off, or else really close. Either way, I'm currently SOL. :) I want to be able to use an extension method to set properties on a class, but that class may (or may not) be updated on a non-UI thread, and derives from a class the enforces updates to be on the UI thread (which implements INotifyPropertyChanged, etc). I have a class defined something like this: public class ClassToUpdate : UIObservableItem { private readonly Dispatcher mDispatcher = Dispatcher.CurrentDispatcher; private Boolean mPropertyToUpdate = false; public ClassToUpdate() : base() { } public Dispatcher Dispatcher { get { return mDispatcher; } } public Boolean PropertyToUpdate { get { return mPropertyToUpdate; } set { SetValue("PropertyToUpdate", ref mPropertyToUpdate, value; } } } I have an extension method class defined something like this: static class ExtensionMethods { public static IEnumerable<T> SetMyProperty<T>(this IEnumerable<T> sourceList, Boolean newValue) { ClassToUpdate firstClass = sourceList.FirstOrDefault() as ClassToUpdate; if (firstClass.Dispatcher.Thread.ManagedThreadId != System.Threading.Thread.CurrentThread.ManagedThreadId) { // WHAT GOES HERE? } else { foreach (var classToUpdate in sourceList) { (classToUpdate as ClassToUpdate ).PropertyToUpdate = newValue; yield return classToUpdate; } } } } Obviously, I'm looking for the "WHAT GOES HERE" in the extension method. Thanks, wTs

  Read the article

• Combo-box values automatically update

  - by glinch

  Hi all, hopefully somebody can help The table structure is as follows: tblCompany: compID compName tblOffice: offID, compID, add1, add2, add3 etc... tblEmployee: empID Name, telNo, etc... offID I have a form that contains contact details for employees, all works ok using after update. A cascading combo box, cmbComp, allows me to select a company, and inturn select the appropriate office, cboOff, and updates the corresponding tblEmployee.offID field correctly. Fields are automatically updated for the address also cmbComp: RowSource SELECT DISTINCT tblOffice.compID, tblCompany.compID FROM tblCompany INNER JOIN AdjusterCompanyOffice ON tblCompany.compID=tblOffice.compID ORDER BY tblCompany.compName; cboOff: RowSource SELECT tblCompany.offID, tblCompany.Address1, tblCompany.Address2, tblCompany.Address3, tblCompany.Address4, tblCompany.Address5 FROM tblCompany ORDER BY tblCompany.Address1; The problem I am having is that when i load a new record how to retrieve the data and automatically load the cmbComp and text fields. The cboOff combo box loads correctly as the control source for this is the offID I imagine there must be a way of setting the value on opening the record? Not sure how though. I dont think I can set the controlsource cmbComp or text fields, or can I? Any help/point in the right direction appreciated, have been searching for a way to do this but cant get anywhere!

  Read the article

• Magento - Integrating Wordpress into Magento for the homepage

  - by Nick

  I currently have a Magento store where I'm using a CMS page as the homepage. I want to integrate my wordpress blog (hosted on the same server) into this CMS page. It would show the latest blog post and preferably have the comment function available on the front page. The first thing I considered was using the Wordpress Loop on the Magento CMS page, but it doesn't seem like it allows PHP. One other thought I had was to create the homepage using modules or blocks. To be honest, I've never created a module or block so I'm not all that familiar with what is involved. The CMS page that I had created is simply an image slider/carousel (nivo-slider) and some photos with links. None of the content actually needs to be done with CMS, it just needs to be presented within my Magento theme/framework. All homepage updates will be handled by myself, so I can bypass the CMS system all together and just update modules if it turns out that the modules solution will allow me to have both the Wordpress blog and nivo-slider on the same page. Any thoughts?

  Read the article

• CLR Stored Procedures

  - by Paul Hatcherian

  In an ASP.NET application, I have a small number of fairly complex, frequently used operations to execute against a database. In these operations, one or more of several tables needs updates or inserts based a logical evaluation of both input parameters and values of certain tables. I've maintained a separation of logic and data access, so the operation currently looks like this: Request received from client Business layer invokes data layer to retrieve data from database Business layer processes result and determines which operation to execute Business layer invokes appropriate data operation Response sent to client As you can see, the client is kept waiting while two separate requests are made to the database. In searching for a solution to this, I've found CLR Stored Procedures, but I'm not sure if I have the right idea about what they are useful for. I have written a replacement for the code above which especially places steps 2-4 in a CLR SP. My understanding is that the SP will be executed locally by SQL Server and result in only one call being made to the server. My initial benchmark tests show this is actually orders of magnitude slower than my original code, but I attribute that recompilation of the code I have not worked out yet and/or some flaw in my environment. My question is basically, is this the intended use of CLR SPs or am I missing something? I realize this is a bit of a compromise structurally, so if there's a better way to do it I'd love to hear it.

  Read the article

• What encoding does InstallShield expect non-latin-alphabet string table entries to use?

  - by DNS

  I work on an app that gets distributed via a single installer containing multiple localizations. The build process includes a script that updates the .ism string table with translations for each supported language. This works fine for languages like French and German. But when testing the installer in, i.e. Japanese, the text shows up as a series of squares. It's unlikely to be a font problem, since the InstallShield-supplied strings show up fine; only the string table entries are mangled. So the problem seems to be that the strings are in the wrong encoding. The .ism is in XML format, with UTF-8 declared as its encoding, so I assumed the strings needed to be UTF-8 encoded as well. Do they actually need to use the encoding of the target platform? Is there any concern, then, about targets having different encodings, i.e. Chinese systems using one GB-encoding versus another? What is the right thing to do here?

  Read the article

• Jquery Internet Explorer 8 compatibility issue, does not load data unless history is deleted...

  - by Scarface

  Hey guys, I have a weird problem. I have an update system that refreshes data on a time interval. It works well in all browsers except internet explorer 8. The problem is that once it loads the data, it does not matter if the data updates further, it will not update the data visually until the internet history is cleared. I am not using any cookies server-side...Anyone ever encounter something like this? Here is my javascript, thanks for any assistance in advance function prepare(response) { var d = new Date(); count++; d.setTime(response.time*1000); var mytime = d.getHours()+':'+d.getMinutes()+':'+d.getSeconds(); var string = '<li class="shoutbox-list" id="list-'+count+'">' + '<span class="shoutbox-list-nick"><a href="statistics.php?user='+response.user+'">'+response.user+'</a></span>' + ' <span class="date">'+mytime+'</span><br>' + '<span class="msg">'+response.message+'</span>' +'</li>'; return string; } function refresh() { $.getJSON(files+"shoutbox.php?action=view&time="+lastTime+"&topic_id="+topic_id, function(json) { if(json.length) { for(i=0; i < json.length; i++) { $('#daddy-shoutbox-list').prepend(prepare(json[i])); $('#list-' + count).fadeIn(1500); } var j = i-1; lastTime = json[j].time; } //alert(lastTime); }); timeoutID = setTimeout(refresh, 3000); } $(document).ready(function() { var options = { dataType: 'json', beforeSubmit: validate, success: function(response, status){ if (response.error=='success'){ success(response, status); } else { $.prompt(response.error); } } }; $('#daddy-shoutbox-form').ajaxForm(options); timeoutID = setTimeout(refresh, 100); });

  Read the article

• Version control for PHP Developement

  - by Vinod Mohan

  Hello, I have been hearing a lot about the advantages of using a version control system and would like to try one. I was doing freelance web development in PHP for the past 2 years, two months back I hired two more programmer to help me. I will be hiring one more person soon. We maintain 4 websites, all of which are my own, which are continuously being edited by one of us. I learned PHP by myself and have never worked in any other firms. Hence I am new to version control, unit testing and all. Currently, we have development servers on our workstations. When we edit a particular section of a site, we download the code for that particular section (say /news/ or /movies/ or /wallpapers/ ) from the production server to the dev server, makes the changes locally and uploads to the production server (no code review / testing). Because of this, our dev server is always out of date from our prod server. Occasionally, this also create problem when one of us forgets to download the latest copy from prod and overwrites the last change. I know this is very very foolish, but currently our prod server is the only copy that has all the updates and latest changes. Can anyone please suggest which is the best version control system for me? I am more interested in distributed version control, since we don't have a central backup for all our code. I read about Mercurial and Git and found that Mercurial is used in several large open source projects by Mozilla, Sun, Symbian etc. So which one do you think is better for me? Not only version control, if there are any other package that I can use to make my current setup better, please mention that too :) Thanks and Regards, Vinod Mohan

  Read the article

• Postgres update rule returning number of rows affected

  - by Lithium

  I have a view table which is a union of two seperate tables (say Table _A and Table _B). I need to be able to update a row in the view table, and it seems the way to do this was through a 'view rule'. All entries in the view table have seperate id's, so an id that exists in table _A won't exist in table _B. I created the following rule: CREATE OR REPLACE RULE view_update AS ON UPDATE TO viewtable DO INSTEAD ( UPDATE _A SET foo = false WHERE old.id = _A.id; UPDATE _B SET foo = false WHERE old.id = _B.id; ); If I do an update on table _B it returns the correct number of rows affected (1). However if I update table _A it returns (0) rows affected even though the data was changed. If I swap out the order of the updates then the same thing happens, but in reverse. How can I solve this problem so that it returns the correct number of rows affected. Thanks.

  Read the article

• Setting up a multi-site CMS, collecting thoughts about the DB schema

  - by Ben Fransen

  Hello all, I'm collecting some thoughts about creating a multisite CMS. In my opinion there are two major approaches. All data is stored into 1 database, giving me the advantage of single point of updates; Seperated databases, so each client has its own database. Giving me the advantage to measure bandwith. Option 1 gives me the disadvantage of measuring bandwith while option is giving me the disadvantage of a single point of update structure. Are there any generic approaches for creating a sort of update system? So my clients can download a small package (maybe a zip with a conf file to tell the updatescript where to put all the files and how to extend the database??) Do you guys have some thougths about the best solution for a situation like this? I have my own webserver, full access to all resources and I'm developing in PHP with MySQL as DBMS. I hope to hear from you and I surely appreciate any effort you make to help me further! Greets from Holland, Ben Fransen

  Read the article

• Interception with Unity in Prism v2 for WPF (not working for me)

  - by Bobby Chopra

  I cannot get interception to work with Prism v2 (Oct 2009). I am trying to intercept the Setter for any Public Properties and then fire the PropertyChanged event if the property has changed. I can see that the code gets executed (by stepping through with the debugger or adding a debug point). However, the WPF Window controls that are bound to these properties do not get updated. If I subscribe to these events and print to the console, I can print out the property change notifications. So, if the View has a textbox, which updates the property on the ViewModel, then the property in the ViewModel gets updated. However, if a button on the view (implemented as a DelegateCommand) causes the property to get updated, then the textbox (TwoWay Binding Mode) that is bound to that Property is not updated even though the event is triggered and the console has printed out the information about which property was updated. Has anyone encountered this issue? Here is the sample WPF Application that I have written. Wordpress doesn't allow uploads of zip files, so I renamed it to have a pdf extension (rename the file to have a zip extension). Please let me know what I am doing wrong. Thanks in advance.

  Read the article

< Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >