Search Results

Search found 14882 results on 596 pages for 'xfce4 power manager'.

Page 227/596 | < Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234  | Next Page >

• Randomely loosing wireless connexion with Cubuntu 12.04

  - by statquant

  I am presently experiencing random disconnections from my wireless network. It looks like it is more and more frequent (however I have not seen any clear pattern). This is killing me... Here is some information that should help (from ubuntu forums). Thanks for reading Machine : Acer Aspire S3 statquant@euclide:~$ lsb_release -d Description: Ubuntu 12.04.1 LTS statquant@euclide:~$ uname -mr 3.2.0-33-generic x86_64 statquant@euclide:~$ sudo /etc/init.d/networking restart * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... statquant@euclide:~$ lspci 02:00.0 Network controller: Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) statquant@euclide:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 004: ID 064e:c321 Suyin Corp. Bus 002 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. statquant@euclide:~$ ifconfig wlan0 Link encap:Ethernet HWaddr 74:de:2b:dd:c4:78 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::76de:2bff:fedd:c478/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:913 errors:0 dropped:0 overruns:0 frame:0 TX packets:802 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:873218 (873.2 KB) TX bytes:125826 (125.8 KB) statquant@euclide:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"Bbox-D646D1" Mode:Managed Frequency:2.437 GHz Access Point: 00:19:70:80:01:6C Bit Rate=65 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on Link Quality=56/70 Signal level=-54 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:71 Missed beacon:0 statquant@euclide:~$ dmesg | grep "wlan" [ 17.495866] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.498950] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.072015] wlan0: authenticate with 00:19:70:80:01:6c (try 1) [ 20.269853] wlan0: authenticate with 00:19:70:80:01:6c (try 2) [ 20.272386] wlan0: authenticated [ 20.298682] wlan0: associate with 00:19:70:80:01:6c (try 1) [ 20.302321] wlan0: RX AssocResp from 00:19:70:80:01:6c (capab=0x431 status=0 aid=1) [ 20.302325] wlan0: associated [ 20.307307] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 30.402292] wlan0: no IPv6 routers present statquant@euclide:~$ sudo lshw -C network [sudo] password for statquant: *-network description: Wireless interface product: AR9485 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 74:de:2b:dd:c4:78 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-33-generic firmware=N/A ip=192.168.1.3 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:c0400000-c047ffff memory:afb00000-afb0ffff statquant@euclide:~$ iwlist scan wlan0 Scan completed : Cell 01 - Address: 00:19:70:80:01:6C Channel:6 Frequency:2.437 GHz (Channel 6) Quality=56/70 Signal level=-54 dBm Encryption key:on ESSID:"Bbox-D646D1" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000125fb152bb Extra: Last beacon: 40020ms ago IE: Unknown: 000B42626F782D443634364431 IE: Unknown: 010882848B960C121824 IE: Unknown: 030106 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 2A0100 IE: Unknown: 32043048606C IE: Unknown: DD180050F2020101820003A4000027A4000042435E0062322F00 IE: Unknown: 2D1A4C101BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D1606080800000000000000000000000000000000000000 IE: Unknown: DD0900037F01010000FF7F IE: Unknown: DD0A00037F04010000000000 And... finally, please note that I did the following (after looking for fixes of similar problems), but unfortunately it did not work sudo modprobe -r iwlwifi sudo modprobe iwlwifi 11n_disable=1

  Read the article

• Ubuntu 10.10 not recognizing external hard drive

  - by sr71

  Installed Ubuntu 10.10 on a hard drive by itself (no windows). All updates are up to date. Everything`works fine except when I plug in a 320 gig Toshiba external hard drive....it is not recognized. When I plug in an 8 gig flash drive it is recognized no problem. What do I mean by "not recognized"? I mean: how do you know it was not recognized. You can check the command "cat /proc/partitions" in a terminal with and without the hdd attached. If you see some difference, it's ok. If the difference is something like "sda1" (sd+letter+number) then you have partition on it, maybe it can't be handled in Ubuntu (no filesystem on it or so). If there is only "sda" in the difference for example (sd+letter, but no number after it) then the drive itself is detected, just no partition is created on it. Also you can check out the messages of the kernel, with the "dmesg" command in the terminal. If there is no disk/partition/anything in /proc/partitions, there can be an USB level problem, you can issue command "lsusb" as it was suggested before my answer. It's really matter of what do you mean about "not recognized". @Marco Ceppi @Oli @Pitto By "not recognized" I meant that when I plug in a 8 gig flash drive an icon immediately appears on the desktop imdicating that there is a flash drive plugged in and I can click on it and view the files on the flash drive. It also shows up on the "Nautilus" default file manager. When I plug in the 320 gig Toshiba external hard drive, I get no indication on the desktop or the file manager (thus "not recogized"). When I run the command "cat/proc/partitions/" I get an error message Could not open location 'file:///home/bob/cat/proc/partitions' with or without the external hard drive installed. With the "dmeg" command I get about 10 pages of info with no mention of disk/partition/anything in /proc/partitions. When I run "lsub" command I get the following: bob@bob-desktop:~$ lsusb Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 04b3:3003 IBM Corp. Rapid Access III Keyboard Bus 003 Device 002: ID 04b3:3004 IBM Corp. Media Access Pro Keyboard Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub bob@bob-desktop:~$

  Read the article

• Create SQL Server Analysis Services Partitions using AMO

  When you have SSAS cubes with millions of rows of data, it is very helpful to create partitions. If you have a few cubes you could probably do this manually, but if there are many or if you want to automate this process you should look for smarter solutions such as programming the creation of partitions dynamically. NEW! Never waste another weekend deployingDeploy SQL Server changes and ASP .NET applications fast, frequently, and without fuss, using Deployment Manager, the new tool from Red Gate. Try it now.

  Read the article

• New ZFS Encryption features in Solaris 11.1

  - by darrenm

  Solaris 11.1 brings a few small but significant improvements to ZFS dataset encryption.  There is a new readonly property 'keychangedate' that shows that date and time of the last wrapping key change (basically the last time 'zfs key -c' was run on the dataset), this is similar to the 'rekeydate' property that shows the last time we added a new data encryption key. $ zfs get creation,keychangedate,rekeydate rpool/export/home/bob NAME PROPERTY VALUE SOURCE rpool/export/home/bob creation Mon Mar 21 11:05 2011 - rpool/export/home/bob keychangedate Fri Oct 26 11:50 2012 local rpool/export/home/bob rekeydate Tue Oct 30 9:53 2012 local The above example shows that we have changed both the wrapping key and added new data encryption keys since the filesystem was initially created.  If we haven't changed a wrapping key then it will be the same as the creation date.  It should be obvious but for filesystems that were created prior to Solaris 11.1 we don't have this data so it will be displayed as '-' instead. Another change that I made was to relax the restriction that the size of the wrapping key needed to match the size of the data encryption key (ie the size given in the encryption property).  In Solaris 11 Express and Solaris 11 if you set encryption=aes-256-ccm we required that the wrapping key be 256 bits in length.  This restriction was unnecessary and made it impossible to select encryption property values with key lengths 128 and 192 when the wrapping key was stored in the Oracle Key Manager.  This is because currently the Oracle Key Manager stores AES 256 bit keys only.  Now with Solaris 11.1 this restriciton has been removed. There is still one case were the wrapping key size and data encryption key size will always match and that is where they keysource property sets the format to be 'passphrase', since this is a key generated internally to libzfs and to preseve compatibility on upgrade from older releases the code will always generate a wrapping key (using PKCS#5 PBKDF2 as before) that matches the key length size of the encryption property. The pam_zfs_key module has been updated so that it allows you to specify encryption=off. There were also some bugs fixed including not attempting to load keys for datasets that are delegated to zones and some other fixes to error paths to ensure that we could support Zones On Shared Storage where all the datasets in the ZFS pool were encrypted that I discussed in my previous blog entry. If there are features you would like to see for ZFS encryption please let me know (direct email or comments on this blog are fine, or if you have a support contract having your support rep log an enhancement request).

  Read the article

• My computer has begun to restart after I upgraded

  - by Voidcode

  After updating to Ubuntu 11.04. My computer started to turn off and reboot. This happens about every half hour, I think there is a tendency to happen when I work with multiple applications at once. It is both my Desktop and Labtop. I has installed- BOINE Manager, PlayOnLinix GIMP, Qt, Wine, VLC-player, Blender 2.57 Otherwise is all as default. Update: See my /var/log/kern.log.1 here: http://paste.ubuntu.com/608690

  Read the article

• SeeWhy Adds Social Media Remarketing Tool

  SeeWhy has launched Conversion Manager, an automated Web analytics service that can optimize an ecommerce retailer&#146;s conversion rates by remarketing with e-mail and social media.

  Read the article

• need some concrete examples on user stories, tasks and how they relate to functional and technical specifications

  - by gideon

  Little heads up, Im the only lonely dev building/planning/mocking my project as I go. Ive come up with a preview release that does only the core aspects of the system, with good business value and I've coded most of the UI as dirty throw-able mockups over nicely abstracted and very minimal base code. In the end I know quite well what my clients want on the whole. I can't take agile-ish cowboying anymore because Im completely dis-organized and have no paper plan and since my clients are happy, things are getting more complex with more features and ideas. So I started using and learning Agile & Scrum Here are my problems: I know what a functional spec is.(sample): Do all user stories and/or scenarios become part of the functional spec? I know what user stories and tasks are. Are these kinda user stories? I dont see any Business Value reason added to them. I made a mind map using freemind, I had problems like this: Actor : Finance Manager Can Add a Financial Plan into the system because well thats the point of it? What Business Value reason do I add for things like this? Example : A user needs to be able to add a blog article (in the blogger app) because..?? Its the point of a blogger app, it centers around that feature? How do I go into the finer details and system definitions: Actor: Finance Manager Action: Adds a finance plan. This adding is a complicated process with lots of steps. What User Story will describe what a finance plan in the system is ?? I can add it into the functional spec under definitions explaining what a finance plan is and how one needs to add it into the system, but how do I get to the backlog planning from there? Example: A Blog Article is mostly a textual document that can be written in rich text in the system. To add a blog article one must...... But how do you create backlog list/features out of this? Where are the user stories for what a blog article is and how one adds/removes it? Finally, I'm a little confused about the relations between functional specs and user stories. Will my spec contain user stories in them with UI mockups? Now will these user stories then branch out tasks which will make up something like a technical specification? Example : EditorUser Can add a blog article. Use XML to store blog article. Add a form to add blog. Add Windows Live Writer Support. That would be agile tasks but would that also be part of/or form the technical specs? Some concrete examples/answers of my questions would be nice!!

  Read the article

• Shutdown/logoff script in Ubuntu 13.10

  - by TNT

  Which would be the best way to run a script upon GUI logoff, shutdown, hibernate, sleep modes? In 12.04 I think I did this in /etc/lightdm/lightdm.config, but on 13.10, the folder structure changed and when I create this script, The display manager wont even start upon boot. I am looking to implement a simple automatic truecrypt unmount command truecrypt -d but of course this would go for any script.

  Read the article

• Wireless Lan driver for Toshiba Satellite C850-A823 PSKCCV-02300XAR

  - by user111942

  I have Toshiba Satellite C850-A823 PSKCCV-02300XAR Laptop, i had installed Ubuntu 12.10 as dual boot (windows 7 already working), after the installation i had noticed that wireless driver not installed in ubuntu 12.10, from windows device manager i got details of wireless lan driver as follows "Realtek RTL8723AE Wireless LAN 802.11n PCI-E NIC" i dont have LAN cable connection, kindly help me how to get wireless driver and install in ubuntu 12.10 hoping for your kind support shiyas

  Read the article

• Download files from a SharePoint site using the RSSBus SSIS Components

  - by dataintegration

  In this article we will show how to use a stored procedure included in the RSSBus SSIS Components for SharePoint to download files from SharePoint. While the article uses the RSSBus SSIS Components for SharePoint, the same process will work for any of our SSIS Components. Step 1: Open Visual Studio and create a new Integration Services Project. Step 2: Add a new Data Flow Task to the Control Flow screen and open the Data Flow Task. Step 3: Add an RSSBus SharePoint Source to the Data Flow Task. Step 4: In the RSSBus SharePoint Source, add a new Connection Manager, and add your credentials for the SharePoint site. Step 5: Now from the Table or View dropdown, choose the name of the Document Library that you are going to back up and close the wizard. Step 6: Add a Script Component to the Data Flow Task and drag an output arrow from the 'RSSBus SharePoint Source' to it. Step 7: Open the Script Component, go to edit the Input Columns, and choose all the columns. Step 8: This will open a new Visual Studio instance, with a project in it. In this project add a reference to the RSSBus.SSIS2008.SharePoint assembly available in the RSSBus SSIS Components for SharePoint installation directory. Step 9: In the 'ScriptMain' class, add the System.Data.RSSBus.SharePoint namespace and go to the 'Input0_ProcessInputRow' method (this method's name may vary depending on the input name in the Script Component). Step 10: In the 'Input0_ProcessInputRow' method, you can add code to use the DownloadDocument stored procedure. Below we show the sample code: String connString = "Offline=False;Password=PASSWORD;User=USER;URL=SHAREPOINT-SITE"; String downloadDir = "C:\\Documents\\"; SharePointConnection conn = new SharePointConnection(connString); SharePointCommand comm = new SharePointCommand("DownloadDocument", conn); comm.CommandType = CommandType.StoredProcedure; comm.Parameters.Clear(); String file = downloadDir+Row.LinkFilenameNoMenu.ToString(); comm.Parameters.Add(new SharePointParameter("@File", file)); String list = Row.ServerUrl.ToString().Split('/')[1].ToString(); comm.Parameters.Add(new SharePointParameter("@Library", list)); String remoteFile = Row.LinkFilenameNoMenu.ToString(); comm.Parameters.Add(new SharePointParameter("@RemoteFile", remoteFile)); comm.ExecuteNonQuery(); After saving your changes to the Script Component, you can execute the project and find the downloaded files in the download directory. SSIS Sample Project To help you with getting started using the SharePoint Data Provider within SQL Server SSIS, download the fully functional sample package. You will also need the SharePoint SSIS Connector to make the connection. You can download a free trial here. Note: Before running the demo, you will need to change your connection details in both the 'Script Component' code and the 'Connection Manager'.

  Read the article

• Improving Finance Department Productivity at BorgWarner

  Nigel Youell, Product Marketing Director, Enterprise Performance Management Applications at Oracle discusses with Mark Smith, Manager, Financial Reporting Systems at BorgWarner how using Oracle's Enterprise Performance Management System on top of SAP transactional systems at BorgWarner has made significant improvements in the productivity of it finance function and halved the time it takes for to close its books.

  Read the article

• Arçelik A.S. Uses Advanced Analytics to Improve Product Development

  - by Sylvie MacKenzie, PMP

  "Oracle’s Primavera P6 Enterprise Project Portfolio Management’s advanced analytics gives us better insight into the product development process by helping us to identify potential roadblocks.” – Iffet Iyigun Meydanli, Innovation and System Development Manager, R&D Center, Arçelik A.S. Founded in 1955, Arçelik A.S. is now the leading household appliance manufacturer in Turkey, and the third-largest household appliance company in Europe. It operates 14 production facilities in five countries (Turkey, Romania, Russia, China, and South Africa), with international sales and marketing offices in 20 countries. Additionally, the company manages 10 brands (Arçelik, Beko, Grundig, Blomberg, Elektrabregenz, Arctic, Leisure, Flavel, Defy, and Altus). The company has a household presence in more than 100 countries, including China and the United States. Arçelik’s Beko brand is among the top-10 household appliance brands in world, as a market leader for refrigerators, freezers, and washing machines in the United Kingdom. Arçelik implemented Oracle’s Primavera P6 Enterprise Project Portfolio Management for improved management of its design and manufacturing projects. With the solution, Arelik has improved its research and development (R&D) with the ability to evaluate technology risks when planning its projects. Also, it is now more easy to make plans for several locations, monitor all resources, and plan for future projects.  Challenges Improve monitoring of R&D resources?including human resources and critical laboratory equipment?to optimize management of the company’s R&D project portfolio Establish a transparent project platform to enable better product and process planning, gain insight into product performance, and facilitate advanced analytics that support R&D and overall business decisions Identify potential roadblocks for better risk management Solutions Worked with Oracle Partner PRM to implement Oracle’s Primavera P6 Enterprise Project Portfolio Management to manage the entire household-appliance, R&D project portfolio lifecycle, enabling managers and project leaders to better track and monitor resources and deliverables in real time Improved risk analysis and evaluation abilities for R&D projects Supported long-term planning needs Used advanced reporting features to capture data needed for budgeting and other project details, including employee performance evaluations Improved monitoring abilities and insight into the overall performance of products postproduction Enabled flexible, fast, and customized reporting with the P6 dashboard on a centralized platform to meet custom reporting needs for project leaders and support on-time and on-budget deliverables Integrated with other corporate departments, such as accounts payable, to upload project invoice data into the Primavera solution and the company’s e-mail system, so that project leaders will be alerted about milestones and other project related information Partner“Oracle Partner PRM provided us with a quick, reliable, and solution-focused approach to its support,” said Iffet Iyigun Meydanli, innovation and system development manager, R&D Center, Arçelik A.S. “The company’s service covered the entire spectrum of our needs, including implementation, training, configuration, problem solving, and integration.”

  Read the article

• What's Hot in our Community Right Now

  - by KJones

  Here’s a look at what our Oracle University community members are reading and sharing the most this month: Free Training On Demand Lessons: Oracle Database 12c New Features for Administrators Infographic: Why Oracle University Should Be Your First Choice for Oracle Training Blog: Coolest Features of Hyperion 11.1.2.3 according to Oracle University Blog:  Developing Java Apps for Embedded Devices New Training Release: Oracle Database 12c: ASM Administration Join our communities to stay plugged into the newest Oracle University releases. -Kate Jones, Oracle University Senior Marketing Manager

  Read the article

• Addressing threats introduced by the BYOD trend

  - by kyap

  With the growth of the mobile technology segment, enterprises are facing a new type of threats introduced by the BYOD (Bring Your Own Device) trend, where employees use their own devices (laptops, tablets or smartphones) not necessarily secured to access corporate network and information.In the past - actually even right now, enterprises used to provide laptops to their employees for their daily work, with specific operating systems including anti-virus and desktop management tools, in order to make sure that the pools of laptop allocated are spyware or trojan-horse free to access the internal network and sensitive information. But the BYOD reality is breaking this paradigm and open new security breaches for enterprises as most of the username/password based systems, especially the internal web applications, can be accessed by less or none protected device.To address this reality we can adopt 3 approaches:1. Coué's approach: Close your eyes and assume that your employees are mature enough to know what he/she should or should not do.2. Consensus approach: Provide a list of restricted and 'certified' devices to the internal network. 3. Military approach: Access internal systems with certified laptop ONLYIf you choose option 1: Thanks for visiting my blog and I hope you find the others entries more useful :)If you choose option 2: The proliferation of new hardware and software updates every quarter makes this approach very costly and difficult to maintain.If you choose option 3: You need to find a way to allow the access into your sensitive application from the corporate authorized machines only, managed by the IT administrators... but how? The challenge with option 3 is to find out how end-users can restrict access to certain sensitive applications only from authorized machines, or from another angle end-users can not access the sensitive applications if they are not using the authorized machine... So what if we find a way to store the applications credential secretly from the end-users, and then automatically submit them when the end-users access the application? With this model, end-users do not know the username/password to access the applications so even if the end-users use their own devices they will not able to login. Also, there's no need to reconfigure existing applications to adapt to the new authenticate scheme given that we are still leverage the same username/password authenticate model at the application level. To adopt this model, you can leverage Oracle Enterprise Single Sign On. In short, Oracle ESSO is a desktop based solution, capable to store credentials of Web and Native based applications. At the application startup and if it is configured as an esso-enabled application - check out my previous post on how to make Skype essso-enabled, Oracle ESSO takes over automatically the sign-in sequence with the store credential on behalf of the end-users. Combined with Oracle ESSO Provisioning Gateway, the credentials can be 'pushed' in advance from an actual provisioning server, like Oracle Identity Manager or Tivoli Identity Manager, so the end-users can login into sensitive application without even knowing the actual username and password, so they can not login with other machines rather than those secured by Oracle ESSO.Below is a graphical illustration of this approach:With this model, not only you can protect the access to sensitive applications only from authorized machine, you can also implement much stronger Password Policies in terms of Password Complexity as well as Password Reset Frequency but end-users will not need to remember the passwords anymore.If you are interested, do not hesitate to check out the Oracle Enterprise Single Sign-on products from OTN !

  Read the article

• Introducing the Native Client SDK

  Introducing the Native Client SDK Henry Bridge, product manager for Native Client introduces the developer preview of Native Client's sdk. For more information go to code.google.com From: GoogleDevelopers Views: 5 0 ratings Time: 05:00 More in Science & Technology

  Read the article

• Oracle Virtualization Friday Spotlight - November 8, 2013

  - by Monica Kumar

  Hands-on Private Cloud Simulator In One Hour Submitted by: Doan Nguyen, Senior Principal Product Marketing Director My aeronautics instructor used to say, "you can’t appreciate flying until you take flight." To clarify, this is not about gearing up in a flying squirrel suit and hopping off a cliff (topic for another blog!) but rather about flying an airplane. The idea is to get hands-on with the controls at the cockpit and experience flight before you actually fly a real plane. After the initial 40 hours of flight time, the concept sank in and it really made sense.This concept is what inspired our technical experts to put together the hands-on lab for a private cloud deployment and management self-service model. Yes, we are comparing the lab to a flight simulator! Let’s look at the parallels: To get trained to fly, starting in the simulator gets you off the ground quicker. There is no need to have a real plane to begin with. In a hands-on lab, there is no need for a real server, with networking and real storage installed. All you need is your laptop The simulator is pre-configured, pre-flight check done. Similarly, in a hands-on lab, Oracle VM and Oracle Enterprise Manager are pre-configured and assembled using Oracle VM VirtualBox as the container. Software installations are not needed. After time spent training at the controls, you can really appreciate the practical experience of flying. Along the same lines, the hands-on lab is a guided learning path, without the encumbrances of hardware, software installation, so you can learn about cloud deployment and management.  However, unlike the simulator training, your time investment with the lab is only about an hour and not 40 hours! This hands-on lab takes you through private cloud deployment and management using Oracle VM and  Oracle Enterprise Manager Cloud Control 12c in an Infrastructure as a service IaaS model. You will first configure the IaaS cloud as the cloud administrator and then deploy guest virtual machines (VMs) as a self-service user. Then you are ready to take flight into the cloud! Why not step into the cockpit now!

  Read the article

• Oracle PeopleSoft PeopleTools 8.53 Release Value Proposition (RVP) published

  - by Greg Kelly

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The Oracle PeopleSoft PeopleTools 8.53 Release Value Proposition (RVP) can be found at: https://supporthtml.oracle.com/epmos/faces/ui/km/DocumentDisplay.jspx?id=1473194.1 The PeopleSoft PeopleTools 8.53 release continues Oracle’s commitment to protect and extend the value of your PeopleSoft implementation, provide additional technology options and enhancements that reduce ongoing operating costs and provide the applications user a dramatically improved experience. Across the PeopleSoft product development organization we have defined three design principles: Simplicity, Productivity and Total Cost of Ownership. These development principles have directly influenced the PeopleTools product direction during the past few releases. The scope for the PeopleTools 8.53 release again builds additional functionality into the product as a result of direct customer input, industry analysis and internal feature design. New features, bug fixes and new certifications found in PeopleTools 8.53 combine to offer customers improved application user experience, page interaction, and cost-effectiveness. Key PeopleTools 8.53 features include: · PeopleSoft Styles and User Interaction Model · PeopleSoft Data Migration Workbench · PeopleSoft Update Manager · Secure by Default Initiative Be sure to check out the PeopleSoft Update Manager. Many other things are also happening in this time frame. · See the posting on the PeopleSoft Interaction Hub https://blogs.oracle.com/peopletools/entry/introducing_the_peoplesoft_interaction_hub · The application 9.2 RVPs will also be published over the next few months · If you haven't seen it, check out John Webb's posting on the PeopleSoft Information Portal https://blogs.oracle.com/peoplesoft/entry/peoplesoft_information_find_it_quickly

  Read the article

• Unix tools in business use: are they helpful?

  - by Prometheus

  Do you think knowing Unix tools like sed, awk, LaTeX, Perl give you a great edge in the business world? (e.g. being a manager) From my short reflection, the only profession that needs those sort of (plain text) tools is programming. Because even when I do creative writing, I rarely ever need it. I mean, do CEOs and executives of large corporations ever learn this kind of stuff if they were not CS major to begin with?

  Read the article

• The Internet Key Wave MW833UP is not recognized in Ubuntu

  - by gio900

  I can't use my Onda MW833UP... :( Any advice? Here is something that someone else may understand: ~$: lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric ~$: lsusb Bus 001 Device 005: ID 1ee8:0012 ~$: dmesg [ 22.709475] cdc_acm 1-1:1.0: ttyACM0: USB ACM device [ 22.714856] usbcore: registered new interface driver cdc_acm [ 22.714866] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 23.520490] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 24.244530] usbcore: registered new interface driver usbserial [ 24.244575] USB Serial support registered for generic [ 24.244673] usbcore: registered new interface driver usbserial_generic [ 24.244681] usbserial: USB Serial Driver core [ 24.265879] USB Serial support registered for GSM modem (1-port) [ 24.285680] usbcore: registered new interface driver option [ 24.285691] option: v0.7.2:USB Driver for GSM modems [ 24.425878] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,commit=600 [ 24.736540] EXT4-fs (sda8): re-mounted. Opts: commit=600 [ 35.705796] Easy slow down manager: checking for SABI support. [ 35.706002] Easy slow down manager: SABI is supported (f5189) [ 36.060099] usbcore: deregistering interface driver uvcvideo [ 139.508061] CE: hpet increased min_delta_ns to 20113 nsec [ 6798.378917] usb 1-1: USB disconnect, device number 5 [ 6809.108232] usb 1-1: new high speed USB device number 6 using ehci_hcd [ 6809.242692] scsi5 : usb-storage 1-1:1.0 [ 6810.241257] scsi 5:0:0:0: CD-ROM Onda Datacard CD-ROM 0001 PQ: 0 ANSI: 0 [ 6810.241841] scsi 5:0:0:1: Direct-Access Onda Storage 0001 PQ: 0 ANSI: 0 [ 6810.271410] sr0: scsi3-mmc drive: 0x/0x caddy [ 6810.272099] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 6810.272852] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 6810.279954] sd 5:0:0:1: [sdb] Attached SCSI removable disk [ 6810.281210] sd 5:0:0:1: Attached scsi generic sg2 type 0 [ 6810.380591] sr0: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 6810.380617] sr: Sense Key : Hardware Error [current] [ 6810.380625] sr: Add. Sense: No additional sense information [ 6810.613937] sr0: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 6810.613972] sr: Sense Key : Hardware Error [current] [ 6810.613984] sr: Add. Sense: No additional sense information [ 6810.673716] usb 1-1: USB disconnect, device number 6 [ 6815.572142] usb 1-1: new high speed USB device number 7 using ehci_hcd [ 6815.706828] cdc_acm 1-1:1.0: ttyACM0: USB ACM device The last 3 lines are where I inserted the Internet key, then reconnected it. usb-device T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1ee8 ProdID=0012 Rev=00.01 S: Manufacturer=Onda S: Product=MW833UP S: SerialNumber=9230B35D870F9CB7AE684EACC5C12BE5EC33B26E C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm Then there is /dev/ttyACM0. When the key is connected to the USB port, everything that will meant...

  Read the article

• Failed to start up after upgrading software in ubuntu 10.10

  - by Landy

  I asked this question in SuperUser one hour ago, then I know this community so I moved the question here... I've been running Ubuntu 10.10 in a physical x86-64 machine. Today Update Manager reminded me that there are some updates to install and I confirmed the action. I should had read the update list but I didn't. I can only remember there is an update about cups. After the upgrading, Update Manager requires a restart and I confirmed too. But after the restart, the computer can't start up. There are errors in the console. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [xxx]usb 1-8: new high speed USB device using ehci_hcd and address 3 [xxx]usb 2-1: new full speed USB device using ohci_hcd and address 2 [xxx]hub 2-1:1.0: USB hub found [xxx]hub 2-1:1.0: 4 ports detected [xxx]usb 2-1.1: new low speed USB device using ohci_hcd and address 3 Gave up waiting for root device. Common probles: - Boot args (cat /proc/cmdline) - Check rootdelay=(did the system wait long enough) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory ALERT! /dev/sda1 does not exist. Dropping to a shell! BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell(ash) Enter 'help' for a list of built-in commands. (initramfs)[cursor is here] At the moment, I can't input anything in the console. The keyboard doesn't work at all. What's wrong? How can I check boot args or "root=" as suggested? How can I fix this issue? Thanks. =============== PS1: the /dev/sda1 is type ext4 (rw,nosuid,nodev) PS2: the /dev/sda1 can be mounted and accessed successfully under SUSE 11 SP1 x64. PS3: From this link, I think the keyboard doesn't work because the USB driver is not loaded at that time.

  Read the article

• GDL Presents: Women Techmakers with JESS3

  GDL Presents: Women Techmakers with JESS3 Join Leslie, COO and Co-founder of JESS3, in conversation with Megan Smith and Betsy Masiello, as they discuss Leslie's experience growing a design business from two employees to a transnational operation. Hosts: Megan Smith - Vice President, Google [x] | Betsy Masiello - Policy Manager Guest: Leslie Bradshaw - President, COO and Co-founder, JESS3 From: GoogleDevelopers Views: 0 3 ratings Time: 01:00:00 More in Science & Technology

  Read the article

• trying to setup wireless

  - by JohnMerlino

  I'm trying to set up wireless on vostro 1520 dell laptop, with latest Ubuntu install. Here's the output of some of the commands that I was told to run: lshw -C network viggy@ubuntu:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 03 serial: 00:24:e8:da:84:25 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168d-1.fw ip=192.168.2.6 latency=0 multicast=yes port=MII speed=100Mbit/s resources: irq:47 ioport:3000(size=256) memory:f6004000-f6004fff memory:f6000000-f6003fff memory:f6020000-f603ffff *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0e:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:fa000000-fa003fff *-network DISABLED description: Wireless interface physical id: 1 logical name: wlan0 serial: 0c:60:76:05:ee:74 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.2.0-29-generic firmware=N/A multicast=yes wireless=IEEE 802.11bg lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 0e:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 1a:00.0 FireWire (IEEE 1394): O2 Micro, Inc. Device 10f7 (rev 01) 1a:00.1 SD Host controller: O2 Micro, Inc. Device 8120 (rev 01) 1a:00.2 Mass storage controller: O2 Micro, Inc. Device 8130 (rev 01) iwconfig lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extensions. At this point in time, I don't have wireless.

  Read the article

• OBIA on Teradata - Part 4

  - by Mohan Ramanuja

  Monitoring Tools Name Action Teradata Manager (PMON) Check for down resources UNIX Check the /var/adm/streams log DBC.Software_Event_Log Check for hardware errors. Tunable ParametersFollowing parameters could be tuned for better performance Maximum Response Buffer Size (MAXRESPSIZE) Session Data Unit (SDU) Transport Date Unit (TDU) Related Links http://forums.teradata.com/forum http://www.info.teradata.com/Datawarehouse/eBrowseBy.cfm?page=TeradataDatabase http://www.teradataforum.com/ncr_pdf.htm http://www.teradata.com/blogs/ http://www.teradatamagazine.com/

  Read the article

• Think Before You Leap - Life is Dangerous for Change Agents

  - by technodrone

  So you want to introduce agile methods to your team... The following are some "lessons learned" when from someone who advocated agile/scrum to a group that was not ready for it. "Change agents, in my experience, face negative consequences. Sometimes, most of the time at the beginning, it's painful. This is the question you might have to ask yourself. Do you want to be a developer in scrum project or do you want be a scrum master managing the process? I think with proper mentoring/training, you can become good scrum master. But is that what you want? if yes, you can go ahead, take the training. if you want to be a developer, you may not need to be certified  as scrum master. You can just pick up from a book such as Mike Cohn new book Succeeding with Agile, I am reading it now. It's good. In my experience, I did waste my resources by trying to change the culture. It cost me lot. Instead, I should have focused on technical practices that are core to agile. Then look for teams that are good at agile. I would have saved lot of energy, and time. Try baby steps first yourself in the company, and next with the team, starting with technical practices like writing unit tests, SOLID principles, patterns, refactoring, continuous integration, pairing, and peer code reviews. These have inherent pull that can bring collaboration from a team.  Once you see team adaption in core practices, then you can introduce scrum concepts like user stories/task board etc.  This idea of Leading by example seems to be working for most of the agile folks. You can pitch core practices to the manager, and the team, and start showing them how you are doing.  You can put a road map for agile adaption and you can pitch to your manager. I would include need for scrum master training as part of the road map. " I thought about his advice for a couple of weeks and read about the pitfalls of technical debt and the team not having prior awareness of agile methods. The more I read and think about it the more I think he was right.  What do you think?

  Read the article

• Learn SSIS in London 12-14 Sep 2012!

  - by andyleonard

  My friends at TechniTrain , the students, and I had a blast during the March 2012 London delivery of From Zero To SSIS ! We have decided to do it again in September 2012 with my new Learning SSIS 2012 3-day course ! Please find a course outline here . It is difficult to list everything I cover in the course, but the outline hits the high spots. This material grew out of my experiences serving as a consultant on short-term engagements and as a manager (and enterprise ETL architect) for a team of forty...(read more)

  Read the article

< Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234  | Next Page >