Search Results

Search found 11142 results on 446 pages for 'incognito mode'.

Page 228/446 | < Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >

• how to fix "BusyBox v1.17.1 (Ubuntu 1:1.17.1-10ubuntu1) built-in shell (ash) Enter 'help' for a list of built-in commands?"

  - by Joseph

  So I was using Ubuntu when suddenly the whole thing froze up and I had to reboot. And from that moment on, the system when it is starting up, prompts this little selection menu: GNU GRUB version 1.99~rc1-13ubuntu3 Ubuntu, with Linux 2.6.38-10-generic ubuntu, with Linux 2.6.38-10-generic (recovery mode) Previous Linux versions Memory test (memtest86+) Memory test (memtest86+, serial console 115200) I have chosen all of the available choices but all I get is another command line system that reads: BusyBox v1.17.1 (Ubuntu 1:1.17.1-10ubuntu1) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs): And honestly I can't do anything with it. Does anyone have any idea of what is going on and how I can get Ubuntu to work again?

  Read the article

• Configuring RAID1 on HP Proliant Microserver N54L / Ubuntu 14.04.1 LTS [duplicate]

  - by Chris Beach

  This question already has an answer here: Cant find my harddrives in ubuntu installation? 2 answers I've bought a N54L and fitted two 3GB drives. Keen to get set up with RAID1. BIOS: SATA controller mode set to "RAID" RAID Option ROM utility: both physical drives set up as one logical drive When I came to install Ubuntu (14.04.1), both drives appeared during the setup process. I was only expecting to see the logical drive, although I'm a complete novice with RAID. I've read that the HP Proliant Microservers don't have "proper" RAID support, and require some kind of driver to be installed. I've tried a few HP utilities from the following apt repo: deb http://downloads.linux.hp.com/SDR/repo/mcp wheezy/current non-free On installation, most say "server not supported" Would appreciate your advice.

  Read the article

• touch pad randomly stopped working on ubuntu desktop

  - by Narcolapser

  Question: What steps can I take to make a touchpad that once worked, work again. Info: I'm running ubuntu desktop on my net book. it has been working more or less fine. There have been some minor issues. but nothing to bad. recently I was messing around with burning a mandriva .iso, and suddenly my touch pad just stops working. every now and then it will work for a brief moment after I bring back from sleep mode. The computer says that there is a touch pad and that it is active. any tips?

  Read the article

• Proliant ML350 Won't Load Windows

  - by Mike

  I have a HP Proliant ML350 G4 running Windows 2003 Server Std Edition that will not load Windows on boot. It gave me a BSOD while running a recent Windows update and has not been able to boot since. The BSOD was a generic error, "Hardware Fault. Contact vendor." I am not getting any errors when the machine boots--it just hangs with a black screen when Windows starts to load. The machine will not boot into safe mode either--it gets stuck after beginning to load drivers. When trying to load the Windows recovery console I get the message that Windows cannot find any hard disks on the machine. This, despite having to load the driver for my storage controller. The HP Smart Start diagnostics finds no problems with my hard disks nor anything else. What should I try next? Mainly, I just want to be able to pull the data off my hard disks.

  Read the article

• Exchange migration to 2007 making Outlook 2003 unable to read meeting requests

  - by Kvad

  Hi, We are currently moving from Exchange 2003 to 2007 (8.2 build 176.2). We have encounted an issue with one user. In Outlook 2003 when getting a meeting request: "Can't open this item. Could not complete the operation. One or more parameter values are nto valid." The item cannot be previewed in the reading pane either. The item can be viewed in OWA and iPhone fine. I've tried with cache mode off and on. Different computers. Same issue. There are the following entries on the account: SMTP [email protected] [email protected] X400 C=AU;A= ;P=Company Name;O=Exchange;S=LastName;G=FirstName; I'm loathe to recreate the account. This will be an extreme last resort. Any ideas? Thanks in advance.

  Read the article

• LSI 9211-8i won't boot in KVM

  - by Paul McMillan

  I'm running ubuntu 11.04 with an LSI 9211-8i in IT mode with the latest firmware (10). I'm using KVM with VT-d enabled to pass the entire PCIe device through to the guest OS. I have the device disabled in the system BIOS. When I boot my virtual machine, the adapter quits during bios initialization with the following error: Unable to load LSI Corporation MPT BIOS MPT BIOS Fault 0Ch encountered at adapter PCI(00h,04h,00h) Press any key to continue... I know the virtualization is correctly enabled. I've blacklisted the kernel modules in the host OS. Has anyone else encountered this error? I'm about out of ideas here. Edit: I contacted LSI tech support about this, and they suggested that I try RedHat and Xen. Apparently they don't test or support anything else.

  Read the article

• HP D2D 4312 Bacula configuration

  - by krisdigitx

  I have configured 5 libraries on the HP D2D system Discovery on the Bacula server shows only the last library and not all libraries. Why? [root@server bacula]# iscsiadm --mode discovery --type sendtargets --portal 10.66.59.114 10.66.59.114:3260,1 iqn.1986-03.com.hp:storage.d2dbs.czj2020vvy.50014380075dca5e.library12.drive1 10.66.59.114:3260,1 iqn.1986-03.com.hp:storage.d2dbs.czj2020vvy.50014380075dcaf2.library12.robotics I can query it fine using... [root@server bacula]# mtx -f /dev/sg2 inquiry Product Type: Tape Drive Vendor ID: 'HP ' Product ID: 'Ultrium 5-SCSI ' Revision: 'ED51' Attached Changer API: No [root@bray bacula]# mtx -f /dev/sg3 inquiry Product Type: Medium Changer Vendor ID: 'HP ' Product ID: 'MSL G3 Series ' Revision: 'EL41' Attached Changer API: No [root@server bacula]# mtx -f /dev/sg3 status Storage Changer /dev/sg3:1 Drives, 97 Slots ( 1 Import/Export ) Data Transfer Element 0:Empty Storage Element 1:Full :VolumeTag=50507F82 Storage Element 2:Full :VolumeTag=50507F83 Storage Element 3:Full :VolumeTag=50507F84 Storage Element 4:Full :VolumeTag=50507F85 Storage Element 5:Full :VolumeTag=50507F86 Storage Element 6:Full :VolumeTag=50507F87 Storage Element 7:Full :VolumeTag=50507F88 Does anyone have any good documentation for implementing Bacula with an HP D2D tape drive for server backups, and how to allocate libraries?

  Read the article

• Airport Extreme roaming setup

  - by Daniel Johansson

  We've got three Apple AirPort extremes and want to setup them as a roaming wlan network on my company. My question is what's the correct setup for this? All three AP:s is supposed to create the same wireless network "MyWlan" and we want roaming supoprt between them so that client can move from floor to floor without having to switch wlan or reconnect. We don't want to use any kind of DHCP or NAT on the AirPorts, only bridge mode. Do we connect the AirPorts to the lan/ethernet using the WAN port or one of the LAN ports? What's the correct settings in the config utility? Have one of the AirPorts create a network and setup the other two to extend the created network from AirPort 1 or have them all create the same network and set the same wlan password?

  Read the article

• Lock down a site using Forms Auth in IIS7 with Windows Auth

  - by Josh

  I have an ASP.NET MVC 1.0 application that uses Forms Authentication. We are using Windows Server 2008. I need to lock down the site so that only certain users (in AD Groups) can access the site. Unfortunately, though, when I set the site to not allow anon users and use windows authentication, due to the integration of the site and IIS, it shows the user as signed in as their domain account, instead of allowing them to sign in through Forms Auth. So, I need a mixed mode authentication. I need the site to be only accessible through windows auth, without anon users, but once you are in, it needs to use forms auth only. How would I go about doing this the right way?

  Read the article

• Running emacs in GNU Screen overrides .emacs settings for [home] key binding in FreeBSD 8.2

  - by javanix

  If I use the following .emacs file, I am able to go to the beginning/end of the current line using the home/end keys as I would expect. (keyboard-translate ?\C-h ?\C-?) (add-to-list 'load-path "/home/sam/programs/go/go/misc/emacs/" t) (require 'go-mode-load) (global-set-key [kp-home] 'beginning-of-line) ; [Home] (global-set-key [home] 'beginning-of-line) ; [Home] (global-set-key [kp-end] 'end-of-line) ; [End] (global-set-key [end] 'end-of-line) ; [End] However, if I open up a screen session it does not function like this (the [home] key still brings me to the beginning of the buffer for some reason). Here is my .screenrc file if anyone can spot anything funky in there: term xterm defutf8 on defflow off startup_message off # terminfo and termcap for nice 256 color terminal # allow bold colors - necessary for some reason attrcolor b ".I" # tell screen how to set colors. AB = background, AF=foreground termcapinfo xterm 'Co#256:AB=\E[48;5;%dm:AF=\E[38;5;%dm' #use bash as the default login shell defshell -bash

  Read the article

• php-fpm start error

  - by Sujay

  I am using php-fpm. I recently recompiled php for including imap functions. But on php-fpm start it gives the following error: Starting php_fpm Error in argument 1, char 1: no argument for option - Usage: php-cgi [-q] [-h] [-s] [-v] [-i] [-f ] php-cgi [args...] -a Run interactively -C Do not chdir to the script's directory -c | Look for php.ini file in this directory -n No php.ini file will be used -d foo[=bar] Define INI entry foo with value 'bar' -e Generate extended information for debugger/profiler -f Parse . Implies `-q' -h This help -i PHP information -l Syntax check only (lint) -m Show compiled in modules -q Quiet-mode. Suppress HTTP Header output. -s Display colour syntax highlighted source. -v Version number -w Display source with stripped comments and whitespace. -z Load Zend extension ................................... failed What could be the problem? Is it in php-fpm.conf or php.ini.

  Read the article

• ReadyNAS Duo - FTP home network connectivity issue

  - by dwabyick

  I have a ReadyNas Duo that I recently purchased and configured on my local home network. I'm an AT&T DSL subscriber using their default 2701HG-B Gateway (2Wire) wireless router. Basically, I have managed to configure my ReadyNAS, and can access HTTP shares and WINS shares just fine, but cannot get access to it via FTP. I've enabled it in the 'Standard File Protocols' section in the UI, and made a share have read/write default access via FTP. My settings: Port: 21 Authentication mode: User Allow upload resumes: Yes Passive ports: 1024-65535 Masquerade as: (empty, but I've tried the internal IP address). I've even poked around at my router, which has a firewall, and even tried to poke a hole for the 'FTP Server'app for the ReadyNAS. Doesn't seem like I should need to do this, or should. Any ideas what else to check? Thanks! -Daniel

  Read the article

• SATA 300 mobo and drives but only connected at SATA 150

  - by Shevek

  I have an Abit AB9 QuadGT motherboard which supports SATA 300 drives Connected to it I have a Kingston SSDNow V Series 64GB as boot drive and a Seagate Barracuda 7200.10 as a data drive. I also have 2 x Optiarc AD-7170S DVD burners attached by SATA Both SSD and HDD are SATA 300 and the optical drives are SATA 150 I have just run CrystalDiskInfo and this is reporting that both SSD and HDD are connected at SATA 150, not SATA 300. I have the BIOS set up to use SATA drives in IDE mode. So a few questions: Is CrystalDiskInfo reporting correctly? Are the optical drives causing the SSD & HDD to connect at the slower rate? Is there any setting to force the SSD & HDD to use SATA 300? I'm running Windows 7 Ultimate

  Read the article

• Exchange 2010 to Exchange 2010 Public Folder Replication

  - by Archit Baweja

  We have 2 exchange servers in our org. MX1 and MX2. I'm trying to replicate all MX1 public folders to MX2. I've setup replication for all the toplevel folders to include the MX2 server. However no public folders are being replicated. The event log does not show any errors. I've set the diagnostic level for all public folder diagnostics to Highest using get-eventloglevel "MSExchangeIS\9001 Public\*" | set-eventloglevel -Level Expert However besides a 3092 event ID (type: 0x2) generated on MX1 (the source server), there are no events being generated that would notify me of any issues. Some technical details. MX1 is Windows 2008 Standard, MX2 is Windows 2008 Enterprise (eval mode right now).

  Read the article

• tmux combine multiple commands to one vi-copy command or tmux command to yank a line

  - by MIkhail

  In tmux, i know we can chain multiple commands to a key by using \; See Here But in vi mode, i want one single key press to go to the beginning of the current line, begin-selection, go to end-of-line, copy-selection. In tmux.conf if i give the following bind-key -t vi-copy 's' start-of-line \; begin-selection \; end-of-line \; copy-selection \; It gives me this : 69: usage: bind-key [-cnr] [-t key-table] key command [arguments] error. Or is there any alternative way to yank the current line in single key.

  Read the article

• Broadcom NIC Teaming with Hyper-V R2

  - by Brian McCleary

  I have read a few contradictory articles regarding support or at least configuration with teaming of Broadcom NIC's and Hyper-V. I have a pair of Dell R805's with 4 Broadcom 5708 NIC's in them. I have teamed them up (one team for public connections and one for private connections) and I have installed Hyper-V. I am getting some intermittent connection issues though and I'm concerned that it might be due to the teaming. Basically I am wondering if anyone has successfully setup NIC teaming in the parent partition and used the teamed adapters through the Hyper-V switch. If so, what is the configuration/proper steps that you used to configure this. I have the server running Windows Server 2008 R2. Right now the server is in test mode, but my concern is that we won't see any issues until we move it into production and get some heavy traffic on the ports.

  Read the article

• Why are my uWSGI processes dying immediately?

  - by orokusaki

  I'm using Supervisor and the uWSGI Emperor mode. When I set limit-as to 512 (MB), workers die instantly (respawn, die, respawn, die, every 3/4 of a second or so): [uwsgi] workers = 4 threads = 40 limit-as = 512 harakiri = 20 max-requests = 1600 ... non-performance/memory/processor-related settings ommitted But, if I change limit-as to: [uwsgi] workers = 4 threads = 40 limit-as = 1024 harakiri = 20 max-requests = 1600 ... non-performance/memory/processor-related settings ommitted and restart uwsgi, the problem is gone immediately. In order to put a sham in this, I've modified the setting back to 512, restarted again, and the problem is back immediately. Notes: My app is a simple Django app without much additional Python setup during start-up time.

  Read the article

• Setup IPsec VPN using ASA5505 behind Juniper SSG5

  - by i_ch3ry

  I have been assigned to establish a Internet IPsecVPN connection between two sites using Cisco ASA5505 A site currently has following setup.(Same setup is expected in another site) Internet-----ADSL Router-----Juniper SSG5-----Intranet (Im not sure what is configured on SSG5 and if router is in bridge mode or if NAT is configured) I was thinking if I should install ASA5505 along with Juniper SSG5? Internet-----ADSL Router-----Juniper SSG5-----Cisco ASA5505(for vpn only)------Intranet or Internet-----ADSL Router-----Cisco ASA5505(for vpn only)-----Juniper SSG5------Intranet My question is if it is possible? What should be the normal way to achieve this goal? Thanks

  Read the article

• Random haproxy 408 errors

  - by Errol Fitzgerald

  I keep getting random 408 timeout messages from haproxy, but can't figure out if its a bug in 1.5-dev25 or something in my config file global log 127.0.0.1 local0 log 127.0.0.1 local1 info #log loghost local0 info maxconn 80000 #debug #quiet user haproxy group haproxy stats socket /tmp/haproxy.sock defaults log global mode http errorfile 503 /etc/haproxy/errors/503.http option httplog option dontlognull retries 3 option redispatch maxconn 80000 timeout client 12s timeout server 120s timeout queue 120s timeout connect 10s timeout http-request 30s option http-server-close timeout http-keep-alive 3000 option abortonclose option httpchk ... Does anyone see anything wrong with these config settings?

  Read the article

• VirtualBox guest network lost after host disconnects

  - by webjunk

  I am running VirtualBox both on a Snow Leopard OSX host machine and on a Windows Vista host machine. Whenever my host machines lose internet connection the guest machines seem to lose internet connectivity permanently even after the host connection to the Internet is reestablished. Resetting guest networking on the guest os, disconnecting cable via host virtualbox settings, and even restarting the guest OS do not help at all. The guest no longer can access the Internet. The only solution is restarting VirtualBox itself while the host is connected to the Internet. This really gets to be a pain when the host goes into sleep mode or I disconnect my laptop at work and then reconnect at home. Guests are setup with NAT networking. It affects guest machines with both Ubuntu and Windows XP OS'es. Is this expected behavior? Does anyone know of a fix? Or am I setup incorrectly?

  Read the article

• Why does Ubuntu's Nautilus display a folder called "Examples" while the console displays "examples.desktop"

  - by broiyan

  These folders occur at /home/username. How does this name discrepancy arise? (Uppercase E versus lowercase e.) It seems to be a shortcut to /usr/share/example-content. How can I delete /usr/share/example-content/Ubuntu_Free_Culture_Showcase without using the command line? One possible answer is to make a privileged Nautilus using something like these SUSE instructions (link below). Unfortunately "gnomesu nautilus" gives me a "gnomesu: no such file" message and "sudo nautilus" does not do anything when added to the properties of the Launcher. Update: "sudo nautilus" from the console let's me delete but there is a mess of error messages. http://forums.opensuse.org/english/get-technical-help-here/how-faq-forums/unreviewed-how-faq/426153-how-nautilus-super-user-mode-gnome.html

  Read the article

• GlassFish will not start when SNMP is enabled

  - by edarc

  I have a GlassFish v3 app server running on 64-bit Debian Lenny. Everything is running fine, except I would like to monitor GF's JVM instance with SNMP. However, every time I try to enable it by adding the following <jvm-options> in domain.xml: -Dcom.sun.management.snmp.port=10161 -Dcom.sun.management.snmp.acl.file=/path/to/snmp.acl -Dcom.sun.management.snmp.interface=127.0.0.1 GlassFish refuses to start: $ asadmin start-domain Waiting for DAS to start .Error starting domain: default. The server exited prematurely with exit code 1. Command start-domain failed. $ There is also nothing illuminating (well, really nothing at all) in jvm.log or server.log. The snmp.acl file contains: acl = { { communities = public access = read-only managers = localhost } } and is chmod 600 (I know this is not the problem because it will actually fail with an error about the permissions if it is set to anything other than 600) $ java -version java version "1.6.0_0" OpenJDK Runtime Environment (build 1.6.0_0-b11) OpenJDK 64-Bit Server VM (build 1.6.0_0-b11, mixed mode)

  Read the article

• Searching for a specific option in a man page

  - by mitch_feaster

  I often find myself man'ing a command just to learn about one specific option. Most of the time I can search to the option just fine, unless it's something like ffmpeg or gcc where I have to step through about 40 matches until I get to the actual description of the option... Sometimes I can get lucky and search for the word "options" to get close and then refine it from there, but it would be nice if I could reliably jump straight to the option in question. It would be cool if there was a tool that could parse out the options and build a database on which you could do searches, but after looking at the groff markup for a few pages I've determined it would only be a best-guess effort due to the lack of meta-information in groff markup... In my ideal world woman mode in emacs would support searching for specific options... :) Any tips for jumping straight to a specific option in a man page?

  Read the article

• Wordpress: Problem installing on dedicated windows server 2008/IIS7

  - by Niels Bosma

  I'm having trouble with installing Wordpress on a dedicated Microsoft Windows Web Server 2008 R2. I've installed Wordpress Version 2.9.2 from Web platform installer 3.0. After installation when I try to access wordpress, either from ~/index.php or ~/wp-admin/install.php I get the error: HTTP Error 500.0 - Internal Server Error File monitoring is enabled for a file which could not be found Modul: FastCgiModule Notification: ExecuteRequestHandler Handler: PHP52_via_FastCGI Error Code: 0x80070003 I have both .Net 2.0 and .Net 4.0 installed. Adding a "phpinfo.php" gives me the same error. The application pool in IIS7 that's used for the website is: "No Managed Code" and set to "Integrated" in "Managed Pipeline Mode". I've tried to reboot the machine. What's more can I try?

  Read the article

• ESX hosts lose connectivity with iSCSI SAN LUNs

  - by Themist

  I've been experiencing this issue for a couple of months now where my ESX hosts lose connectivity with my iSCSI SAN vmfs volumes. As a results the ESX hosts enter a nonresponsive mode the associated VMs disconnect and the only remedy is to reboot the host. This issue happens randomly . I have escalated this issue with VMWare but I haven't had any solution to the issue yet. I see no errors on my switches and there are no hardware issues as well. My SAN infrastucture is solid and there are 2 paths for every vmfs volume. Did anybody else experienced a similar issue? Themis

  Read the article

< Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >