Search Results

Search found 18775 results on 751 pages for 'old hardware'.

Page 228/751 | < Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >

• Rescue system running TFS that BSODs, into vmware esxi

  - by 3molo

  Hi, After moving to new facilities, one of our old Dell servers running Windows Server 2003 R2 on PowerEdge 2650 HW BSODs with 0x8e. The server runs Team Foundation Server, so we have a few guys dependent on it. No one here knows TFS, so we have no idea how difficult it would be to setup from scratch. We have the MSSQL database(s) backed up, recent and fresh copy. Tried removing/refitting memory modules, but with no success. The system boots into safe mode but hangs occasionally. I booted a linux livecd and did a dd of both c: and d:, so I have all the data in compressed images on a vmware machine. For the guest, I created a 38G (actually it became 40GB) partition to act as C:, and booted a live cd. I then uncompressed the compressed disk image of c: and dd'd it to the new c: using 'gunzip -dc c.img.gz | dd of=/dev/sda1 bs=1M'. The operation ran for about 1000 seconds, and completed successfully. I assumed it would at least try to boot windows (but most likely BSOD due to not having correct drivers), but the Vmware ESXi guest does not seem to recognize it as a bootable disk. We don't have the vmware enterprise license, so the vmware converter cold cloning is not an option. Did I do something wrong in my dd's etc with the ISOs, or why would it not (try to) boot? Am I wasting my time? What other approach is there? Will continue to try to remove services and drivers to make the physical machine at least work reasonably well in safe mode. What do you suggest? 1. Continue to get the dd'd images to the virtual disk and get it to boot. 2. Install a new windows server, get team foundation server and restore from backup. 3. Focus on the old problematic hardware Any help appreciated

  Read the article

• How do I activate the F_LINE input in a transplanted HP chassis?

  - by admin

  I have an HP Pavilion Media Center PC chassis, vintage 2003 or so and I replaced the motherboard in it with a newer (vintage 2009) HP motherboard, M2N68-LA (Narra 5). I have scoured the internet trying to find pinouts for the motherboard to no avail. My question concerns the front panel audio, specifically Line In. The old chassis was built for AC97 but the new mobo is build for the newer HD audio standard. I figured out by comparison & experimentally how to connect the Mic & Headphone jacks to the HD audio header of the mobo by adding a manual switch to set the SENSE lines. Now all works fine for Mic & headphone. The old chassis also has a front panel Line In jack that the newer HP chassis does not have. However, the new mobo has a 4 pin white connector labeled F_LINE that I believe is a line input. Under Windows 7 I see the two Line Inputs in the mixer but I can't get one of them to become active. The 4 pin F_LINE connector uses the two middle pins for ground, and presumably the other two for left and right audio inputs. There are no pins for sensing on that connector. Can anyone tell me how to use that F_LINE input for the front panel, or how to activate it?

  Read the article

• Hyper-V and attaching physical disks

  - by Mike Christiansen

  So, I'm looking at rebuilding my home server. My current setup is the following Windows 7 Ultimate 1TB Boot Drive (my smallest drive) Windows Dynamic Spanned volume, continaing 1x 1TB drive, 2x 2TB drives, totalling 5TB. I am upgrading to a hardware RAID controller, and I would like to run Hyper-V server core. However, I want to retain the ability to join my "file server" to a homegroup, so I must use Windows 7. I know VHDs can only be like 127GB or something, so I obviously need to directly connect disks to my Windows 7 machine. Here is my plan: Server Core 2008 R2 (Hyper-V) 1TB Boot Drive (storing VHDs for boot drives of VMs) - possibly in a RAID 1 with my other 1TB drive 5x 2TB drives (1x 2TB drive hot spare), totalling 10TB, directly attached to a Windows 7 VM, for use of homegroup for this array. In the past, I directly attached the windows dynamic volume to a Windows 7 VM, and performance was abysmal. The question is, with hardware RAID, will it really make that much of a difference? Server specs: Intel Core 2 Quad Q9550 2.83GHz Asus Maximus II Formula (PCI-E x16) 8GB DDR2 RAM PC2-6400 (Yes, I know its a bit out of date)

  Read the article

• When to raise domain functional level?

  - by Joel Coel

  We very recently completed a project to retire two old domain controllers running Server 2003 R2. They are now replaced with shiny new 2008 R2 boxes. However, the functional level of the domain has not yet been updated for the 2008 R2 servers, just in the long-shot case of the need for a rollback to the old controllers. I expect to have the all clear to update the domain by next weekend. I also want to note that our desktop clients are still 95% Windows XP. However, we're about to start a project to update our 200 or so clients to Windows 7 before the end of the calendar year. Is there any advantage to holding the domain at the 2003 functional level while we are still supporting more Windows XP than Windows 7, especially given that some of the management stations are still XP? Update: I forgot to mention earlier that we still have a pair of windows 2000 servers (not domain controllers) that support some legacy software. I'm working to replace those, but in the meantime I need to be sure that Windows 2000 can still participate in a 2008 R2 domain.

  Read the article

• How to Monitor Network in Medium-Sized Company?

  - by Kyle Lowry

  I work at a medium sized company (100+ employees). An issue that has been cropping up is network performance, internet access in particular. We have about 70 or more computers, a mix of Mac OS X and Windows XP & 7 machines. We have several servers (Exchange server, PC file servers, MS SQL, Blackberry, FTP, Mac server, etc). There are four main switches, a SonicWall firewall, and probably a couple routers in the server room with a dozen or so more scattered around the building. The network structure has grown organically over a number of years; and, as far as I know, there really isn't a monitoring solution in place. When we experience network issues (slow connections, dropped packets, and so on), our general solution is to power cycle some hardware or go around to each employee and ask them if they are uploading/downloading any large files. This is really inefficient and time consuming, and it does not allow us to monitor the network, tackling potential problems proactively. I would like to find a solution that would allow me to monitor network usage company-wide in real time, with detail going down to the individual computer, ideally. Given the hodgepodge of equipment and operating systems, what would be the best way to set up some kind of monitoring solution? Hardware, software, restructuring our network architecture?

  Read the article

• Servers - Buying New vs Buying Second-hand

  - by Django Reinhardt

  We're currently in the process of adding additional servers to our website. We have a pretty simple topology planned: A Firewall/Router Server infront of a Web Application Server and Database Server. Here's a simple (and technically incorrect) diagram that I used in a previous question to illustrate what I mean: We're now wondering about the specs of our two new machines (the Web App and Firewall servers) and whether we can get away with buying a couple of old servers. (Note: Both machines will be running Windows Server 2008 R2.) We're not too concerned about our Firewall/Router server as we're pretty sure it won't be taxed too heavily, but we are interested in our Web App server. I realise that answering this type of question is really difficult without a ton of specifics on users, bandwidth, concurrent sessions, etc, etc., so I just want to focus on the general wisdom on buying old versus new. I had originally specced a new Dell PowerEdge R300 (1U Rack) for our company. In short, because we're going to be caching as much data as possible, I focussed on Processor Speed and Memory: Quad-Core Intel Xeon X3323 2.5Ghz (2x3M Cache) 1333Mhz FSB 16GB DDR2 667Mhz But when I was looking for a cheap second-hand machine for our Firewall/Router, I came across several machines that made our engineer ask a very reasonable question: If we stuck a boat load of RAM in this thing, wouldn't it do for the Web App Server and save us a ton of money in the process? For example, what about a second-hand machine with the following specs: 2x Dual-Core AMD Opteron 2218 2.6Ghz (2MB Cache) 1000Mhz HT 16GB DDR2 667Mhz Would it really be comparable with the more expensive (new) server above? Our engineer postulated that the reason companies upgrade their servers to newer processors is often because they want to reduce their power costs, and that a 2.6Ghz processor was still a 2.6Ghz processor, no matter when it was made. Benchmarks on various sites don't really support this theory, but I was wondering what server admin thought. Thanks for any advice.

  Read the article

• Some doubts about the use of usermod and groupmod command

  - by AndreaNobili

  I am not yet a true "Linux guy" and I have the following doubts about how exactly do the following shell procedure (a list of commands steps) founded in a tutorial that I am following (I want deeply understand what I am doing before do it): sudo passwd root then login again as root usermod -l miner pi usermod -m -d /home/miner miner groupmod -n miner pi exit So at the beginning it enable the root account and I have to login again in the system as root...this is perfectly clear for me. And now I have the followings doubts: 1) The usermod command: usermod -l miner pi usermod -m -d /home/miner miner Reading the official documentation of the usermod command I understand that this command modify the informations related to an existing account Reading the documentation it seems to me that the -l parmether modify the name of the user pi in miner and then the -m -d paramether move the contents of the old home directory to the new one (named miner) and use this new directory as home directory My doubt is: what exactly do the executions of these operation? I think that: Rename the existing pi user in miner Then move the content of the old home directory (the pi home directory? or what?) into a new directory (/home/miner) that now is the home directory for the miner user. Is it right? The the second doubt is related to this command groupmod -n miner pi It seems to me that change the group name from pi in miner But what exactly is a group in Linux and why is it used? Tnx

  Read the article

• Trying to retrieve data with a thermaltake blacX enclosure: Windows 7 believes the drive to be "uninitialized"

  - by Peeter Joot

  I have a laptop that won't boot. It appears to be a power problem ... laptop auto-turns-off within about 10 seconds of pressing the power button (with power buttons lighted temporarily and no display with or without external monitor). I've followed the dell troubleshooting guide which suggested reseating the memory modules and the hard drives, but that didn't help. Before trying to have the laptop serviced, I wanted to get some data off off the hard drive. I bought a thermaltake blacX enclosure, intending to use this to both use to retrieve the drive data with, and then later use as external storage. Following the instructions (insert cables, insert drive power on) goes fine, and Windows 7 on another laptop installs the device driver software. However, no drive letter shows up in 'Computer'. Under Computer-manage-storage I see the drive is there, and there's an option to "initialize" the drive. The Windows "initialize" dialog gives me the option to pick between "MBR" and "GPT" partitioning, which sounds like a good way to destroy the data on the drive. I'm thinking that I've purchased the wrong device for the job (or that my old drive is damaged). The old drive to recover info from is a Western Digital 500G/7200rpm SATA drive if that is relavent. Both the original laptop and the one I'm using for recovery are running Windows 7. Does anybody have experience with using a blacX enclosure to recover data off an already formatted drive?

  Read the article

• Hyper-V and attaching physical disks [migrated]

  - by Mike Christiansen

  So, I'm looking at rebuilding my home server. My current setup is the following Windows 7 Ultimate 1TB Boot Drive (my smallest drive) Windows Dynamic Spanned volume, continaing 1x 1TB drive, 2x 2TB drives, totalling 5TB. I am upgrading to a hardware RAID controller, and I would like to run Hyper-V server core. However, I want to retain the ability to join my "file server" to a homegroup, so I must use Windows 7. I know VHDs can only be like 127GB or something, so I obviously need to directly connect disks to my Windows 7 machine. Here is my plan: Server Core 2008 R2 (Hyper-V) 1TB Boot Drive (storing VHDs for boot drives of VMs) - possibly in a RAID 1 with my other 1TB drive 5x 2TB drives (1x 2TB drive hot spare), totalling 10TB, directly attached to a Windows 7 VM, for use of homegroup for this array. In the past, I directly attached the windows dynamic volume to a Windows 7 VM, and performance was abysmal. The question is, with hardware RAID, will it really make that much of a difference? Server specs: Intel Core 2 Quad Q9550 2.83GHz Asus Maximus II Formula (PCI-E x16) 8GB DDR2 RAM PC2-6400 (Yes, I know its a bit out of date)

  Read the article

• Thunderbird: export email account settings

  - by zpea

  I'd like to create a new profile for Thunderbird using the same mail accounts I already configured in my old profile. As it is quite a number of accounts, it would be great to have a way to export/import them instead of writing down the settings just to fill in again in the new profile. Using web search and search here I mainly found following suggestions that do not match what I need: Copy the whole profile: Not possible for me as I don't want to copy other settings, the downloaded mail data etc. and the old profile broke when running out of space in the home folder anyway. Use mozBackup: There seem to be several programs by that name (forks?). In any case, it's Windows-only and hence no option (I am mostly on Linux and prefer platform-independent solutions anyway) Use accountex: Seems to do what I want, but it is not compatible with current Thunderbird version (supports only up to version 3.1) Posts with various tips from 4 years ago: Top results in the web search with the G. But they do not work in current versions of Thunderbird either. Did I overlook anything? After all, it doesn't sound like I was looking for something nobody ever looked for.

  Read the article

• How can I monitor network traffic?

  - by WIndy Weather

  I have a home network with about 10 devices including BluRay player [netflix] and both windows and linux machines. I need to collect network traffic statistics so that if questions come up about how much traffic I'm using I have the answer independent of my ISP. I've looked at DD-WRT, but I see that even buying a new router that will be supported is a problem since I might get the wrong version of the hardware. I have a DIR-655 and a DIR-501 - neither of which is supported. I don't mind buying new hardware, but it looks like a crap-shoot to get one that will work. DD-WRT looks like a bad solution unless someone knows of a place to get a router that is guaranteed to work. Does someone know of an arduino or other SBC solution? I have plenty of NAT routers already, so I just need traffic statistics for external traffic. The network is GBit Ethernet inside and Cable / soon to be DSL outside. The DIR-655 only gives me "packets", not bytes transferred oddly enough. Thanks, ww

  Read the article

• Grayed-Out Sleep and Hibernate Options on Windows 7 After Updating Graphics Driver

  - by Maxim Z.

  I have a Gateway M275 Tablet PC, on which I've installed Windows 7 Ultimate. The laptop is quite old, so there aren't any Win7 drivers for it, not to mention any Vista drivers. Win7 has been working for some time, but I noticed that my video output wasn't working. I went into Device Manager and found that I didn't have a driver for my video card: it just recognized it as the standard one. I searched online and found an XP driver for it, released by Gateway. Device Manager accepted this driver and prompted me to reboot. After that, I noticed that my Sleep and Hibernate options in the Shut Down menu have been grayed-out. I looked online and found that many people are attributing this to display drivers, as such an old driver would surely not be compatible with the standby procedures Windows 7 uses. To make it clear: I was able to Sleep and Hibernate before updating the drivers; now, I can't. Running powercfg /a gives me, "An internal system component has disabled this standby state," for each available standby mode. Is there some way that the driver can be modified to support hibernation? The new driver fixed my video output problem, but I guess hibernation is more important for me. If not, what steps should I take to remove the driver and just leave the standard Windows one, which previously supported hibernation and sleep on this computer? Thanks in advance.

  Read the article

• Computer wont start, just blinks on and off

  - by Ryan

  This is really strange. I had a comp that was working fine for over a year, then suddenly it started to shut off, it got so bad that I press the power button and in around 30 secs while booting windows it would shut off, then 20 secs... then 10 secs, then it refused to start all together. So I bought a new PSU (850w Thermaltake, the old one was 550w corsair) thinking that was the problem, I fitted the new PSU now and its the same thing, I press the power button and my fans start for a split second (they have led lights on them, so the lights come on) and then everything goes off again. I thought maybe it was my power button that was loose on my comp, luckily I had another chassis near by so I disconnected the powerSW from the old one and put ran the powerSW from the new chassis, press the power on the new chassis and same thing, it blinks for a split second and off again. Double checked connections from the PSU to the cpu power as well as board mobo power, its tight. It's pretty unlikely both the PSUs have the same exact problem so am lost... Suggestions?

  Read the article

• Only receiving one document at a time from new web server.

  - by Robert Kuykendall

  We're trying to move our internal ticketing system from a Microsoft Small Business Server in the server closet to a Rackspace Cloud Server. The install is Fedora 11 LAMP, and should be default out of the box, except for the vhosts appended to the bottom of the httpd.conf. The new server is suffering from crippling load times, and watching the page load in Firebug it's easy to see the problem occurring, but I can't figure out the cause. Here is the [old server] (http://rkuykendall.com/uploads/old.server.png). I was expecting something like this, but a little slower since it was no longer hosted locally. Instead, the [new server] (http://rkuykendall.com/uploads/new.server.png) appears to only serve one file at a time. Here's another example of this [staircase load time effect] (http://rkuykendall.com/uploads/staircase.png) and another very clear example of the [staircase effect] (http://rkuykendall.com/uploads/staircase2.png). I talked to some guys on Freenode #httpd with no luck. I created a duplicate server to play with, and also created a fresh server with Fedora Core 13 and moved over just the database and web files with no luck. Any suggestions? ( image links disabled due to n00b-spam-restrictions )

  Read the article

• Linux iptables / conntrack performance issue

  - by tim

  I have a test-setup in the lab with 4 machines: 2 old P4 machines (t1, t2) 1 Xeon 5420 DP 2.5 GHz 8 GB RAM (t3) Intel e1000 1 Xeon 5420 DP 2.5 GHz 8 GB RAM (t4) Intel e1000 to test linux firewall performance since we got bitten by a number of syn-flood attacks in the last months. All machines run Ubuntu 12.04 64bit. t1, t2, t3 are interconnected through an 1GB/s switch, t4 is connected to t3 via an extra interface. So t3 simulates the firewall, t4 is the target, t1,t2 play the attackers generating a packetstorm thorugh (192.168.4.199 is t4): hping3 -I eth1 --rand-source --syn --flood 192.168.4.199 -p 80 t4 drops all incoming packets to avoid confusion with gateways, performance issues of t4 etc. I watch the packet stats in iptraf. I have configured the firewall (t3) as follows: stock 3.2.0-31-generic #50-Ubuntu SMP kernel rhash_entries=33554432 as kernel parameter sysctl as follows: net.ipv4.ip_forward = 1 net.ipv4.route.gc_elasticity = 2 net.ipv4.route.gc_timeout = 1 net.ipv4.route.gc_interval = 5 net.ipv4.route.gc_min_interval_ms = 500 net.ipv4.route.gc_thresh = 2000000 net.ipv4.route.max_size = 20000000 (I have tweaked a lot to keep t3 running when t1+t2 are sending as many packets as possible). The result of this efforts are somewhat odd: t1+t2 manage to send each about 200k packets/s. t4 in the best case sees aroung 200k in total so half of the packets are lost. t3 is nearly unusable on console though packets are flowing through it (high numbers of soft-irqs) the route cache garbage collector is no way near to being predictable and in the default setting overwhelmed by very few packets/s (<50k packets/s) activating stateful iptables rules makes the packet rate arriving on t4 drop to around 100k packets/s, efectively losing more than 75% of the packets And this - here is my main concern - with two old P4 machines sending as many packets as they can - which means nearly everyone on the net should be capable of this. So here goes my question: Did I overlook some importand point in the config or in my test setup? Are there any alternatives for building firewall system especially on smp systems?

  Read the article

• Getting the EFS Private Key out of system image

  - by thaimin

  I had to recently re-install Windows 7 and I lost my exported private key for EFS. I however have the entirety of my user directory and my figuring that the key must be in there SOMEWHERE. The only question is how to get it out. I did find the PUBLIC keys in AppData\Roaming\Microsoft\SystemCertificates\My\Certificates If I import them using certmg.msc it says I do have the private key in the information, but if I try export them it says I do not have the private key. Also, decryption of files doesn't work. There is also a "keys" folder at AppData\Roaming\Microsoft\SystemCertificates\My\Keys. After importing the certificates I copy those over into my new installation but it has no effect. I am starting to believe they are either in AppData\Roaming\Microsoft\Protect\S-1-5-21-...\ or AppData\Roaming\Microsoft\Crypto\RSA\S-1-5-21-...\ but I am unsure how to use the files in those folders. Also, since my SID has changed, will I be able to use them? The other parts of the account have remained the same (name and password). I also have complete access to the user registry hive and most of the old system files (including the old system registry hives). I do keep seeing references to "Key Recovery Agent" but have not found anything about using, just that it can be used. Thanks!

  Read the article

• Windows 7 automatically logs out when logging in

  - by Luke

  A Windows 7 HP x64 computer is set to automatically log in (no password), but once it starts logging in, it starts to load the desktop after the welcome screen, but before icons or background images are loaded, it goes to the Welcome screen saying 'Logging Off'. I can log in with Safe Mode, and I ran a couple different virus scans, with no detections. I also tried checking the userinit.exe file in System32 (as suggested by MANY users for Windows XP), but it's the same version as a working system. I also checked the registry under HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogon for the SHELL and UserInit values, but they look normal. I tried to disable all startup items (through MSCONFIG) to select Diagnostic boot, but then I get a blue screen about the video driver not loading. Any other ideas? EDIT I created a new user, and it could log in no problems. I am thinking it's the NTUSER.DAT file. I just renamed it to NTUSER.DAT.old, then tried logging in as the problem user. I could log in, but as a TEMP profile. His profile folder is now C:\Users\TEMP, and his old folder is still accessible but in the wrong location. EDIT 2 I can't seem to turn off the TEMP profile, so I'm open to other suggestions. Copying the folders (i.e. Documents, Music, etc) does not work, as it creates an additional TEMP.000 then TEMP.001 folder each time the user logs in.

  Read the article

• OpenVZ container is running but does not show in vzlist nor can I find the private/conf files for the container

  - by Kakeakeai

  I was creating a new OpenVZ container on one of our VPS Nodes while the power went out for that machine. After bringing the machine back online I could no longer access the container CTID=101. I could not destroy it using "vzctl destroy 101", I can not enter or control it, and "vzlist -a" does NOT display any containers at all (this was a fresh node and the first container was being created). I decided to create a new container at this point assuming that the old container just was not saved for some reason. However when I go to add the ip/host to the new container I get a warning that the IP is already in use. After doing a ping to the IP I realized there was a machine on that IP. I SSH into the machine and discover it is the OLD container that some how is orphaned. I can not find it on the filesystem, I can not find it using VZ commands, and It is set to start on Node boot so it is impossible to shutdown (even ssh in and typing the "shutdown now" command just reboots the container not shut it down). Is this a flaw in OpenVZ or am I missing something? I have all the outputs and logs if needed. Thank you all so much in advance.

  Read the article

• Configure New Server for .htaccess

  - by Phil T

  I have a new LAMP CENTOS 5 server I am setting up and trying to copy the configuration from another web server I have. I am stuck with what I think is a mod_rewrite problem. If I go to http://old-server.com/any_page_name.php it correctly routes through some handling code in index.php and shows me a graceful "Page Cannot Be Displayed" message. But if I go to http://new-server.com/any_page_name.php I get an ugly Apache 404 Not Found error message. I looked in both httpd.conf files and they both have only one reference to mod_rewrite. LoadModule rewrite_module modules/mod_rewrite.so So it seems like that should be fine. At the bottom of httpd.conf I have the code: <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/html ServerName new-server.com ErrorLog logs/new-server.com-error_log CustomLog logs/new-server.com-access_log common </VirtualHost> Then in the root of /var/www/html I have the exact same .htaccess file that looks like this: RewriteEngine on Options +FollowSymlinks RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . index.php [L] ErrorDocument 404 /page-unavailable/ <files ~ "\.tpl$"> order deny,allow allow from none deny from all </files> So I don't see why the page load at old-server.com works fine while new-server.com doesn't route through index.php like I want it to do. Thanks.

  Read the article

• Windows Server 2003 (w/Exchange) move to new machine

  - by James Booker

  I have an ageing domain controller (the only one on a 10-pc network) which needs rebooting often. I have a Dell Poweredge 2850 server doing nothing, so I'd like to move the DC to that, but here's the catch - I don't have Win2k Server Std install media any more as it's been lost. I purchased "Easus Todo Backup Advanced Server" which claims to be able to recover to dissimilar metal, but it's not quite working (although I don't think it's the product's fault) I know the server and PERC RAID card are good because I installed Ubuntu on the logical drive (4 x 72GB disks RAID 5) no problems. I've booted frmo the Easus Todo backup CD (which is WinPE based) and recovered to the logical disk on the RAID (after installing driver inside the WinPE environment from a NAS drive) The problem is when I boot the server, I can get the OS selection menu, but any option results in a blank screen, with no errors. I figure this is probably because the driver wasn't installed on the old machine (which is IDE-based (i know, i know!) and doesn;t have a RAID controller) I've booted from the CD and copied the mraid35x.sys file to the c:\windows\system32\drivers folder on the recovered system, but it makes no difference. I made a boot.ini with rdisks 0-10 defined, and booting from each of these resulted in a file error (i.e. 'this isn't a real disk') - the only disk that gets any response (the blank screen) is multi(0)disk(0)rdisk(0)partition(1) which just gives me the blank black screen and no disk activity. Is there any way I can force the drvier to be installed on the source system (so i can do a full backup again), i've tried right-clicking the oemsetup.inf and clicking install, but it didn't actually do anything. I attempted to force it with the 'Add new hardware' wizard and forcing with the 'have disk' option but it still gave me no hardware to select. Also I've got an identical machine running WinXP which uses the PERC driver successfully (which was obviously done at install time) and the boot.ini settings are the same : multi(0)disk(0)rdisk(0)partition(1) Any ideas would be appreciated.

  Read the article

• Terminal Server CPU usage at 100%

  - by Light1c3

  I'm running a terminal server with around 50-60 users,and every so often the server will go from 40% usage to 100%. I took a closer look an it seems every time this happens, a different user or two seem to be caught in a loop and end up using < 30% where the rest of the users only use a maximum of 5%. The company behind the software we use clame it's due to the servers inadequate hardware (It's a VM system running on a dual - quad core setup) which to me sounds like BS! I'm fairly new to this level of IT so if I misspoke I apologize. I have no way to prove it but I believe adding more raw hardware power wont do me any good as this to me seems like a bug in their software, and it will suck up as much ( or little) CPU as it's given. The VM in question has 4 vCPU cores and 12 GB RAM available, and is running Windows Server 2008, 64-bit Thanks in advance for your help! Note: I have the same question posted on SO, but was pointed in this direction so just in case, here is a link to the post http://stackoverflow.com/questions/17276602/termserver-cpu-at-100

  Read the article

• If I run two monitors from two different graphic cards, can I still have Twinview?

  - by rumtscho

  I am planning to get a second 2560x1440 monitor for home. The trouble is, I only have 1xDVI, 1xVGA on my graphics card (a 250 GT). I don't want to buy a new graphics card until the prices for the 500 series have stabilized, so probably not before summer (or will it happen earlier? I don't remember how it was for other series, and I couldn't find long-term price history for video cards). The solution I had in mind is to get the 7600 GS from my old PC, which also has 1xDVI, 1xVGA, and run each monitor on a separate card. I have never done that, and I was wondering 1. If I will be able to run the monitors in Twinview then, or will I be stuck with separate X sessions, and 2. Whether there are some other disadvantages as compared to a single-head graphics card. (I am using the proprietary driver because I need compiz). As an aside, how do I find out whether the DVI port on the old graphics card is dual link?

  Read the article

• Exchange Full Access issue

  - by Benjamin Jones

  I was just hired as a System Admin for a small company. They use Exchange 2010 for their Mail Server. I've never had a permission issue like this with Exchange because I worked for a larger firm with less responsibility before. Their old system admin is LONG GONE, so I can't ask him what he did. The issue: Right now ANYONE can gain access to a mailbox and view the mail in the mailbox. This is disabled by default you say and you have to grant them full access ? You are right, but the old System Admin I guess didn't know what he was doing. SO right now user A can open up user B mailbox with out being granted permission. So here is what I found out. Every user in EMC Full Access Permission has Exchange Server group granted. Within the Exchange Server Group, Domain User's is a Member Of. Within Domain User's all user's are listed as Members. So my guess is because of this all users can access ANY mailbox? Well GOOD News. The company is small (35 people) and they are not computer savvy, so hopefully no one has figured out they can open anyone's mailbox.(From what I can tell no). Next thing I did was with my domain user in EMC, delete Exchange Servers Group in FUll Access Permissions and grant access to my user. I made sure that my memeber was apart of the Exchange Server Group. Went to our OWA site and now I don't have permission to my own mailbox. Re did everything to the way it was with my user and now I'm stuck. Any help? I would think granting a single user that is in the Exchange Server group, Full Access to that mailbox would enable them to open that mailbox???? I guess I am wrong.

  Read the article

• Truecrypt files corrupted after moving PC into another case

  - by Dygerati

  I recently bought a new PC case and transferred all of my PC hardware into it. The only hardware modification was the addition of two identical ram modules. The entire process went smoothly, and everything worked and booted as before. The only side-effect I found when accessing one my of file-based hidden truecrypt volumes shortly there after. Some of the files in the volume - NOT all - seemed to be entirely corrupted. The directory and file names are garbled characters, but a few of the directories in the same volume appear and function normally. Also, all files in the non-hidden tc volume were still intact. Is this not weird? The only other real change I could think of would be that the hard drives were connected to different SATA ports on the mobo. I really don't know how the truecrypt encryption works well enough to know what could cause this...and the fact that not all the files were corrupted makes it more bizarre still. So, first off (and I'm not too hopeful on this point), would it be possible to restore these files? I had a backup of most, but not all of the files involved. Other than that I'm just curious how this happened and how I can prevent it next time. Thanks!

  Read the article

• Can I have a single solid state drive and a RAID array on the same machine? [closed]

  - by jaminto

  Hi- To summarize, i'm looking to use a single solid state drive as my primary drive, and two conventional sata drives in a RAID 1 configuration for data. I am trying to install 64-bit Windows 7 onto this configuration. Is this possible? Here are the details: I built a desktop that has been running 64-bit Vista on two 500Gb in a RAID 1 array for a few years. I just purchased an Intel X25-M 80Gb Sata Solid-State Drive, and was planning on using this a my primary drive, and keeping the RAID 1 array as my data drive. I added the SSD drive and in the RAID setup, configured it as a RAID 0 array of only one disk. Then, I tried to do a clean install of windows 7 64-bit, but got stuck in the "Missing driver for CD/DVD drive" black hole of selecting driver files and Windows telling me that i don't have the appropriate driver for my hardware. The missing hardware is NOT a CD/DVD drive, since i'm installing off of my only CD/DVD drive. Plus at one point i was able to point it at a driver for my raid controller, and then my hard drives magically showed up as browsable sources for finding drivers for some other unnamed device that setup couldn't recognize. After a few hours of trying drivers (this was a very slow process) i decided to reboot and look at the BIOS settings. I'm using an ASUS M2A-VM motherboard which has an ATI SB600 RAID controller on board. I switched the "On board SATA Type" setting from "SATA" to "AHCI" thinking that since AHCI is an Intel thing, this would help. Unfortunately, this abandoned my RAID configuration, and my previously mirrored drives are showing up as separate drives when i boot into my current windows installation. Am i trying to do the impossible here? Should i just buy a separate SATA/RAID PCI card and plug the SSD into that? Any help would be greatly appreciated.

  Read the article

< Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >