Search Results

Search found 74153 results on 2967 pages for 'test and set'.

Page 228/2967 | < Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >

• It is okay to set MASQUERADE at 2 network interfaces in a Linux server?

  - by Patrick L

  There is a Linux server with 3 network interfaces, eth0, eth1, eth2. IP forwarding has been turn on in this server. eth0 is connected to 10.0.1.0/24. Its IP is 10.0.1.1. eth1 is connected to 172.16.1.0/24. Its IP is 172.16.1.1. Server A can ping router C at 172.16.1.2. eth2 is connected to 192.168.1.0/24. Its IP is 192.168.1.1. Server A can ping server B at 192.168.1.2. Router C is able to route to 172.16.2.0/24 and 172.16.3.0/24. [10.0.1.0/24] | 172.16.2.0/24------| | [C]------172.16.1.0/24------[A]------192.168.1.0/24------[B] 172.16.3.0/24------| We have set MASQUERADE at eth0. When server B (192.168.1.2) connect to 10.0.1.0/24, IP MASQUERADE will happen at eth0. Can we set MASQUERADE at eth1? Is it okay to set MASQUERADE at more than 1 network interfaces in Linux?

  Read the article

• How do you set the movement speed of a sprite?

  - by rphello101

  I'm using Slick 2D/Java to play around with graphics. Getting an image to move is easy: Input input = gc.getInput(); if(input.isKeyDown(sprite.up)){ sprite.y--; }else if (input.isKeyDown(sprite.down)){ sprite.y++; }else if (input.isKeyDown(sprite.left)){ sprite.x--; }else if (input.isKeyDown(sprite.right)){ sprite.x++; } However, this is called on every update, so if you hold up, the sprite moves to the edge of the screen in a few hundred milliseconds. Since coordinates are integers, I can't add less than 1 to slow the sprite down. I'm assuming I must have to implement a timer of some sort or something. Any advice?

  Read the article

• How to, set-justification-full per line in emacs without messing up on return?

  - by inaki

  Hi, I have two problems in emacs. First. How do I set-justification-full for the whole document? I can do M-X set-justification-full for a region successfully, but I would like to make it work in the whole document. Second. How do I manage not to get lines jumping from one place to another when I have done set-justification-full, and press enter? That is, say I have the following paragraph: %%if normalized beforehand then the rule would be, %%\begin{gather} %%(\hat{y}_{i}^{'} \times \hat{y}_{i+1}^{'}) \cdot \hat{z}_{mst} = 1, \quad then \ \Omega 1\\ %%(\hat{y}_{i}^{'} \times \hat{y}_{i+1}^{'}) \cdot \hat{z}_{mst} = %%-1,\quad then \ \Omega When I do set-justification-full, it will convert six lines into three lines, that is, what I want to do is a per line justification. Is this possible in emacs? Thank you all very much for your help. Inhaki2006

  Read the article

• Set the thumbImage and watch the slider-bar disappear?

  - by Roberta

  [sld1 setThumbImage:[UIImage imageNamed:@"Blue.png"] forState:UIControlStateHighlighted]; [sld1 setThumbImage:[UIImage imageNamed:@"Blue.png"] forState:UIControlStateNormal ]; Would that cause the slider-bar image to disappear? Mine are all gone. (The thumb-image displays just fine.) Apple's docs make it sounds like I can use any ONE of above 2 lines of code. (But I guess I really need both.) And I can't find anything about "you must always do all 4": Set the normal-state image. Set the highlighted-state image. Set the setMinimumTrackImage. Set the setMaximumTrackImage.

  Read the article

• Receiving "expected expression before" Error When Using A Struct

  - by Zach Dziura

  I'm in the process of creating a simple 2D game engine in C with a group of friends at school. I'd like to write this engine in an Object-Oriented way, using structs as classes, function pointers as methods, etc. To emulate standard OOP syntax, I created a create() function which allocates space in memory for the object. I'm in the process of testing it out, and I'm receiving an error. Here is my code for two files that I'm using to test: test.c: #include <stdio.h> int main() { typedef struct { int i; } Class; Class *test = (Class*) create(Class); test->i = 1; printf("The value of \"test\" is: %i\n", test->i); return 0; } utils.c: #include <stdio.h> #include <stdlib.h> #include "utils.h" void* create(const void* class) { void *obj = (void*) malloc(sizeof(class)); if (obj == 0) { printf("Error allocating memory.\n"); return (int*) -1; } else { return obj; } } void destroy(void* object) { free(object); } The utils.h file simply holds prototypes for the create() and destroy() functions. When I execute gcc test.c utils.c -o test, I'm receiving this error message: test.c: In function 'main': test.c:10:32: error: expected expression before 'Class' I know it has something to do with my typedef at the beginning, and how I'm probably not using proper syntax. But I have no idea what that proper syntax is. Can anyone help?

  Read the article

• Print Data Frame with Columns Center Aligned in R

  - by Glen

  I would like to print a data frame where the columns are center aligned. Below is what I have I tried, I thought printing the data frame test1 would result in the columns being aligned in the center but this is not the case. Any thoughts on how I can do this? test=data.frame(x=c(1,2,3),y=c(5,6,7)) names(test)=c('Variable 1','Variable 2') test[,1]=as.character(test[,1]) test[,2]=as.character(test[,2]) test1=format(test,justify='centre') print(test,row.names=FALSE,quote=FALSE) Variable 1 Variable 2 1 5 2 6 3 7 print(test1,row.names=FALSE,quote=FALSE) Variable 1 Variable 2 1 5 2 6 3 7

  Read the article

• Test a database conection without codeigniter throwing a fit, can it be done?

  - by RobertWHurst

  I'm just about finished my first release of automailer, a program I've been working on for a while now. I've just got to finish writing the installer. Its job is to rewrite the codigniter configs from templates. I've got the read/write stuff working, but I'd like to be able to test the server credentials given by the user without codingiter throwing a system error if they're wrong. Is there a function other than mysql_connect that I can use to test a connection that will return true or false and won't make codeigniter have a fit? This is what I have function _test_connection(){ if(mysql_connect($_POST['host'], $_POST['username'], $_POST['password'], TRUE)) return TRUE; else return FALSE; } Codigniter doesn't like this and throws a system error. <div style="border:1px solid #990000;padding-left:20px;margin:0 0 10px 0;"> <h4>A PHP Error was encountered</h4> <p>Severity: Warning</p> <p>Message: mysql_connect() [<a href='function.mysql-connect'>function.mysql-connect</a>]: Unknown MySQL server host 'x' (1)</p> <p>Filename: controllers/install.php</p> <p>Line Number: 57</p> </div> I'd rather not turn off error reporting.

  Read the article

• Should I set global vars value on startup or the first time I use them? C++

  - by extintor

  I have a few global vars I need to set the value to, should I set it into the main/winmain function? or should I set it the first time I use each var?

  Read the article

• define macro in C wont work

  - by Spidfire

  Im trying to make a macro in C that can tell if a char is a hex number ( 0-9 a-z A-Z) #define _hex(x) (((x) >= "0" && (x) <= "9" )||( (x) >= "a" && (x) <= "z") || ((x) >= "A" && (x) <= "Z") ? "true" : "false") this what ive come up with but it wont work with a loop like this char a; for(a = "a" ; a < "z";a++){ printf("%s => %s",a, _hex(a)); } but it gives a error test.c:8: warning: assignment makes integer from pointer without a cast test.c:8: warning: comparison between pointer and integer test.c:9: warning: comparison between pointer and integer test.c:9: warning: comparison between pointer and integer test.c:9: warning: comparison between pointer and integer test.c:9: warning: comparison between pointer and integer test.c:9: warning: comparison between pointer and integer test.c:9: warning: comparison between pointer and integer

  Read the article

• If you had to go back and re-learn your skill set, how would you do it?

  - by vorbb

  My younger brother is looking to start programming. He's 14, and technically-inclined, but no real experience programming. He's looking to me for guidance, and I don't feel as if my experience is enough, so I figured I'd ask here. He's more interested in web programming, but also has an interest in desktop/mobile/server applications. What would be a good learning path for him to take? I'm going to buy him a bunch of books for Christmas to get him started; the question is, what should he learn, and in which order? The way I see it, he needs to learn theory and code. I'd like to start him off with Python or Ruby or PHP. If he wants to get in to web, he's also going to need to learn HTML, CSS, Javascript, etc. Out of those three domains (Languages, Theory, Markup/Etc.), what is the best order do you think to learn in? Also, am I missing anything? Thanks!

  Read the article

• Automated browser testing: How to test JavaScript in web pages?

  - by Dave

  I am trying to write an application that will test a series of web-pages programmatically. The web pages being tested have JavaScript embedded within them which alter the structure of the HTML when they complete execution. It is then the goal to take the final HTML (post-execution of the embedded JavaScript) and compare it against a known output. Essentially, the Input --- Output for the test application is: URL ---[retrieve HTML]--- HTML ---[execute JS, then compare]--- PASS/FAIL Here is the challenge: I have been unable to find a solution that is able to take the HTML I retrieve from the URL and process the JavaScript, as a browser would, and generate the final HTML a user might see from "View Source" on the same page within the browser. It would be very surprising if this sort of approach has not been made before, so I'm hoping someone out there knows of a fitting solution for this application/problem? If at all possible, I'm hoping for a solution that integrates with .NET (I've tried using the WebBrowser, with no luck). However, if there is an existing 3rd party application that can do exactly this, that would be quite acceptable. Thanks in advance for the suggestions! Dave

  Read the article

• mod_rewrite [L] flag not working as expected?

  - by bobobobo

  I thought the [L] flag indicated that "this rule should be the last rule processed for this http request.." However when I have 2 rules like: RewriteRule ^test$ php/test.php [L] RewriteRule (.*) error.php What always happens is requests to http://localhost/test go to error.php, not to test.php as I expected, since I put the [L] there. If you comment out the second rule there, then requests to http://localhost/test go to test.php as expected. What I'm really trying to do is catch 404 errors with mod_rewrite. Its possible what I'm trying to do is just plain wrong. But I still want to know why the catch-all rule is active since I did put an [L] after the ^test rule. I see a large listing in here where the server admin lists a bunch of paths that begin with the recognized directories, but I wanted to avoid doing this by simply using a nice catch-all rule.

  Read the article

• Precise exposition of an image for set number of frames (Vsync?)

  - by Istrebitel

  I need to make a simple enough program in C#, but it seems to be impossible via usual WinForms means. I need to show something (a string of text, an image) on the screen for very small time interval. Since typical monitors are 60Hz, this interval would be 1 or 2 frames (16,6 or 33,3 ms). I tried doing this with usual WinForms, and it is not possible because, apparently, there is no way to know how many frames were output to the monitor since some point in time. I can only draw on the controls, and monitor output is totally independant. So even if I run the timer, say, for 17 ms, between showing and hiding the image, it still sometimes manages not to draw a single frame of my image on the screen (even though theoretically it should, because 17ms 16,6ms). Moreover, even 20ms seems to slow (even though i should be more than enough). I did some game development as a hobby in the past (Delphi X, XNA) and I know that you usually draw the whole screen by yourself, each frame. Also, I know that there is an option called Vsync in most modern games, that allows you to synchronize your framerate to your monitor's frame rate. So, is it possible? I mean, to actually know how many frames were sent to the monitor with w/e I want to show?

  Read the article

• How dinamically set validation attributes to a Model MVC 2?

  - by Tar

  Lets says I have the following model public class Person { [NameIsValid] public string Name { get; set;} public string LastName { get; set; } } I created a custom attribute NameIsValid for this model. Lets says for ViewA I need the custom attribute validation in the model, but for ViewB I dont need this custom validation attribute, how can I dinamically set or remove the custom attribute from the model when need it? Thanks!

  Read the article

• Can I use Jquery to automatically find and set the width and height of a variety of images?

  - by Ryan

  I am using the Masonry Plugin and for it to work correctly with images, you need to set the width and height within the image tag. All the image's heights will vary, but the width will be set at 200px. Is there a way for Jquery to detect the height of each image and set it's height? That way I don't have to go set the height of every single image. Does this make sense? Hope someone can help! I am new to Jquery.

  Read the article

• My company is a Rackspace Cloud client (provided to us for free) and I'm trying to find some way to set up version control

  - by Nick S.

  As the title says, my (small) business is provided a free Rackspace Cloud client account. We receive a decent amount of traffic but I haven't been able to put together a business case to move to our own server yet. However, we are developing some complex apps and I'm frustrated with not having the ability to even ssh into the remote server. Ultimately, I'd like to set up some sort of version control (at this point, I'll take anything, git or otherwise). I have control over databases, can FTP, set up cron jobs, and perform a few other basic functions. I can't think of any way to set up git or something similar without ssh access. A thought went through my mind that maybe some sort of PHP version control exists that I might be able to set up, but I haven't had any luck finding it yet. Do you guys have any ideas, thoughts, or advice?

  Read the article

• Determining smallest number of samples for 99% accuracy

  - by test

  I'm trying to compare 100,000 records on a local database (L) with 100,000 records on a remote database (R). Basically I want to know if an elment in L exusts in R. To determine that, I have to make a request against the R for each L, which takes a long time (I know, there should be a better way, there isn't, that's the API I've got). So I would like to test a small sample of L against R, and then infer with some level of confidence how many are present in the whole R. How many do I have to test to have a 99% confidence level?

  Read the article

• How do I set up ZScreen to upload images to my mediawiki?

  - by Johan

  I've set up a mediawiki with all the correct settings and enabled image uploading. When I do this manually this all works OK. I want to be able to upload screenshots automatically into my mediawiki using ZScreen. There is an option to do this: I press Test..., this work OK, however I'm unable to tell ZScreen to to actually get the picture into my mediawiki. There's no option to select mediawiki as my destination. How do I setup zscreen to upload to my mediawiki?

  Read the article

• Is it possible to set the date on a Linux machine to the year 2040?

  - by Daryl Spitzer

  I need to be able to set the date on Ubuntu (8.04.4 LTS) to the year 2040 (to test something that isn't relevant to this question). Is that possible? I can run: $ sudo date -s "15 JAN 2038 18:00:00" Fri Jan 15 18:00:00 PST 2038 ...but: $ sudo date -s "15 JAN 2039 18:00:00" date: invalid date `15 JAN 2039 18:00:00' Is the limit somewhere in 2038 (or prior to Jan. 15, 2039)? Does this change with different versions of Linux?

  Read the article

• How to improve Varnish performance?

  - by Darkseal

  We're experiencing a strange problem with our current Varnish configuration. 4x Web Servers (IIS 6.5 on Windows 2003 Server, each installed on a Intel(R) Xeon(R) CPU E5450 @ 3.00GHz Quad Core, 4GB RAM) 3x Varnish Servers (varnish-3.0.3 revision 9e6a70f on Ubuntu 12.04.2 LTS - 64 bit/precise, Kernel Linux 3.2.0-29-generic, each installed on a Intel(R) Xeon(R) CPU E5450 @ 3.00GHz Quad Core, 4GB RAM) The Varnish Servers performance are awfully bad in general, to the point that if we shut down one of them the other two are unable to fullfill all the requests and start to skip beats resulting in pending requests, timeouts, 404, etc. What can we do to improve our Varnish performance? Considering that we're getting less than 5k request per seconds during our max peak, we should be able to serve our pages even with a single one of them without any problem. We use a standard, vanilla CFG, as shown by this varnishadm param.show output: acceptor_sleep_decay 0.900000 [] acceptor_sleep_incr 0.001000 [s] acceptor_sleep_max 0.050000 [s] auto_restart on [bool] ban_dups on [bool] ban_lurker_sleep 0.010000 [s] between_bytes_timeout 60.000000 [s] cc_command "exec gcc -std=gnu99 -g -O2 -pthread -fpic -shared - Wl,-x -o %o %s" cli_buffer 8192 [bytes] cli_timeout 20 [seconds] clock_skew 10 [s] connect_timeout 0.700000 [s] critbit_cooloff 180.000000 [s] default_grace 10.000000 [seconds] default_keep 0.000000 [seconds] default_ttl 120.000000 [seconds] diag_bitmap 0x0 [bitmap] esi_syntax 0 [bitmap] expiry_sleep 1.000000 [seconds] fetch_chunksize 128 [kilobytes] fetch_maxchunksize 262144 [kilobytes] first_byte_timeout 60.000000 [s] group varnish (113) gzip_level 6 [] gzip_memlevel 8 [] gzip_stack_buffer 32768 [Bytes] gzip_tmp_space 0 [] gzip_window 15 [] http_gzip_support off [bool] http_max_hdr 64 [header lines] http_range_support on [bool] http_req_hdr_len 8192 [bytes] http_req_size 32768 [bytes] http_resp_hdr_len 8192 [bytes] http_resp_size 32768 [bytes] idle_send_timeout 60 [seconds] listen_address :80 listen_depth 1024 [connections] log_hashstring on [bool] log_local_address off [bool] lru_interval 2 [seconds] max_esi_depth 5 [levels] max_restarts 4 [restarts] nuke_limit 50 [allocations] pcre_match_limit 10000 [] pcre_match_limit_recursion 10000 [] ping_interval 3 [seconds] pipe_timeout 60 [seconds] prefer_ipv6 off [bool] queue_max 100 [%] rush_exponent 3 [requests per request] saintmode_threshold 10 [objects] send_timeout 600 [seconds] sess_timeout 5 [seconds] sess_workspace 16384 [bytes] session_linger 50 [ms] session_max 100000 [sessions] shm_reclen 255 [bytes] shm_workspace 8192 [bytes] shortlived 10.000000 [s] syslog_cli_traffic on [bool] thread_pool_add_delay 2 [milliseconds] thread_pool_add_threshold 2 [requests] thread_pool_fail_delay 200 [milliseconds] thread_pool_max 2000 [threads] thread_pool_min 5 [threads] thread_pool_purge_delay 1000 [milliseconds] thread_pool_stack unlimited [bytes] thread_pool_timeout 300 [seconds] thread_pool_workspace 65536 [bytes] thread_pools 2 [pools] thread_stats_rate 10 [requests] user varnish (106) vcc_err_unref on [bool] vcl_dir /etc/varnish vcl_trace off [bool] vmod_dir /usr/lib/varnish/vmods waiter default (epoll, poll) This is our default.vcl file: LINK sub vcl_recv { # BASIC recv COMMANDS: # # lookup -> search the item in the cache # pass -> always serve a fresh item (no-caching) # pipe -> like pass but ensures a direct-connection with the backend (no-cache AND no-proxy) # Allow the backend to serve up stale content if it is responding slow. # This defines when Varnish should use a stale object if it has one in the cache. set req.grace = 30s; if (client.ip == "127.0.0.1") { # request from NGINX - do not alter X-Forwarded-For set req.http.HTTPS = "on"; } else { # Add an X-Forwarded-For to keep track of original request unset req.http.HTTPS; unset req.http.X-Forwarded-For; set req.http.X-Forwarded-For = client.ip; } set req.backend = www_director; # Strip all cookies to force an anonymous request when the back-end servers are down. if (!req.backend.healthy) { unset req.http.Cookie; } ## HHTP Accept-Encoding if (req.http.Accept-Encoding) { if (req.http.Accept-Encoding ~ "gzip") { set req.http.Accept-Encoding = "gzip"; } else if (req.http.Accept-Encoding ~ "deflate") { set req.http.Accept-Encoding = "deflate"; } else { unset req.http.Accept-Encoding; } } if (req.request != "GET" && req.request != "HEAD" && req.request != "PUT" && req.request != "POST" && req.request != "TRACE" && req.request != "OPTIONS" && req.request != "DELETE") { /* non-RFC2616 or CONNECT */ return (pipe); } if (req.request != "GET" && req.request != "HEAD") { /* only deal with GET and HEAD by default */ return (pass); } if (req.http.Authorization) { return (pass); } if (req.http.HTTPS ~ "on") { return (pass); } ###################################################### # COOKIE HANDLING ###################################################### # METHOD 1: do not remove cookies, but pass the page if they contain TB_NC if (!(req.url ~ "(?i)\.(png|gif|ipeg|jpg|ico|swf|css|js)(\?[a-z0-9]+)?$")) { if (req.http.Cookie && req.http.Cookie ~ "TB_NC") { return (pass); } } return (lookup); } # Code determining what to do when serving items from the IIS Server sub vcl_fetch { unset beresp.http.Server; set beresp.http.Server = "Server-1"; # Allow items to be stale if needed. This is the maximum time Varnish should keep an object. set beresp.grace = 1h; if (req.url ~ "(?i)\.(png|gif|ipeg|jpg|ico|swf|css|js)(\?[a-z0-9]+)?$") { unset beresp.http.set-cookie; } # Default Varnish VCL logic if (!beresp.cacheable || beresp.ttl <= 0s || beresp.http.Set-Cookie || beresp.http.Vary == "*") { set beresp.ttl = 120 s; return(hit_for_pass); } # Not Cacheable if it has specific TB_NC no-caching cookie if (req.http.Cookie && req.http.Cookie ~ "TB_NC") { set beresp.http.X-Cacheable = "NO:Got Cookie"; set beresp.ttl = 120 s; return(hit_for_pass); } # Not Cacheable if it has Cache-Control private else if (beresp.http.Cache-Control ~ "private") { set beresp.http.X-Cacheable = "NO:Cache-Control=private"; set beresp.ttl = 120 s; return(hit_for_pass); } # Not Cacheable if it has Cache-Control no-cache or Pragma no-cache else if (beresp.http.Cache-Control ~ "no-cache" || beresp.http.Pragma ~ "no-cache") { set beresp.http.X-Cacheable = "NO:Cache-Control=no-cache (or pragma no-cache)"; set beresp.ttl = 120 s; return(hit_for_pass); } # If we reach to this point, the object is cacheable. # Cacheable but with not enough ttl: we need to extend the lifetime of the object artificially # NOTE: Varnish default TTL is set in /etc/sysconfig/varnish # and can be checked using the following command: # varnishadm param.show default_ttl else if (beresp.ttl < 1s) { set beresp.ttl = 5s; set beresp.grace = 5s; set beresp.http.X-Cacheable = "YES:FORCED"; } # Cacheable and with valid TTL. else { set beresp.http.X-Cacheable = "YES"; } # DEBUG INFO (Cookies) # set beresp.http.X-Cookie-Debug = "Request cookie: " + req.http.Cookie; return(deliver); } sub vcl_error { set obj.http.Content-Type = "text/html; charset=utf-8"; if (obj.status == 404) { synthetic {" <!-- Markup for the 404 page goes here --> "}; } else if (obj.status == 500) { synthetic {" <!-- Markup for the 500 page goes here --> "}; } else if (obj.status == 503) { if (req.restarts < 4) { return(restart); } else { synthetic {" <!-- Markup for the 503 page goes here --> "}; } } else { synthetic {" <!-- Markup for a generic error page goes here --> "}; } } sub vcl_deliver { if (obj.hits > 0) { set resp.http.X-Cache = "HIT"; } else { set resp.http.X-Cache = "MISS"; } } Thanks in advance,

  Read the article

• How can I set the disk partition alignment using linux tools?

  - by alexandrul

  After reading Disk Partition Alignment Best Practices for SQL Server, I just want to give those advices a try, but on my linux test server. What are the required parameters in order to set the partition offset (for fdisk if possible, or any other partitioning tool available on a linux live cd)?

  Read the article

• The Challenge with HTML5 – In Pictures

  - by dwahlin

  I love working with Web technologies and am looking forward to the new functionality that HTML5 will ultimately bring to the table (some of which can be used today). Having been through the div versus layer battle back in the IE4 and Netscape 4 days I think we’re headed down that road again as a result of browsers implementing features differently. I’ve been spending a lot of time researching and playing around with HTML5 samples and features (mainly because we’re already seeing demand for training on HTML5) and there’s a lot of great stuff there that will truly revolutionize web applications as we know them. However, browsers just aren’t there yet and many people outside of the development world don’t really feel a need to upgrade their browser if it’s working reasonably well (Mom and Dad come to mind) so it’s going to be awhile. There’s a nice test site at http://www.HTML5Test.com that runs through different HTML5 features and scores how well they’re supported. They don’t test for everything and are very clear about that on the site: “The HTML5 test score is only an indication of how well your browser supports the upcoming HTML5 standard and related specifications. It does not try to test all of the new features offered by HTML5, nor does it try to test the functionality of each feature it does detect. Despite these shortcomings we hope that by quantifying the level of support users and web developers will get an idea of how hard the browser manufacturers work on improving their browsers and the web as a development platform. The score is calculated by testing for the many new features of HTML5. Each feature is worth one or more points. Apart from the main HTML5 specification and other specifications created the W3C HTML Working Group, this test also awards points for supporting related drafts and specifications. Some of these specifications were initially part of HTML5, but are now further developed by other W3C working groups. WebGL is also part of this test despite not being developed by the W3C, because it extends the HTML5 canvas element with a 3d context. The test also awards bonus points for supporting audio and video codecs and supporting SVG or MathML embedding in a plain HTML document. These test do not count towards the total score because HTML5 does not specify any required audio or video codec. Also SVG and MathML are not required by HTML5, the specification only specifies rules for how such content should be embedded inside a plain HTML file. Please be aware that the specifications that are being tested are still in development and could change before receiving an official status. In the future new tests will be added for the pieces of the specification that are currently still missing. The maximum number of points that can be scored is 300 at this moment, but this is a moving goalpost.” It looks like their tests haven’t been updated since June, but the numbers are pretty scary as a developer because it means I’m going to have to do a lot of browser sniffing before assuming a particular feature is available to use. Not that much different from what we do today as far as browser sniffing you say? I’d have to disagree since HTML5 takes it to a whole new level. In today’s world we have script libraries such as jQuery (my personal favorite), Prototype, script.aculo.us, YUI Library, MooTools, etc. that handle the heavy lifting for us. Until those libraries handle all of the key HTML5 features available it’s going to be a challenge. Certain features such as Canvas are supported fairly well across most of the major browsers while other features such as audio and video are hit or miss depending upon what codec you want to use. Run the tests yourself to see what passes and what fails for different browsers. You can also view the HTML5 Test Suite Conformance Results at http://test.w3.org/html/tests/reporting/report.htm (a work in progress). The table below lists the scores that the HTML5Test site returned for different browsers I have installed on my desktop PC and laptop. A specific list of tests run and features supported are given when you go to the site. Note that I went ahead and tested the IE9 beta and it didn’t do nearly as good as I expected it would, but it’s not officially out yet so I expect that number will change a lot. Am I opposed to HTML5 as a result of these tests? Of course not - I’m actually really excited about what it offers.  However, I’m trying to be realistic and feel it'll definitely add a new level of headache to the Web application development process having been through something like this many years ago. On the flipside, developers that are able to target a specific browser (typically Intranet apps) or master the cross-browser issues are going to release some pretty sweet applications. Check out http://html5gallery.com/ for a look at some of the more cutting-edge sites out there that use HTML5. Also check out the http://www.beautyoftheweb.com site that Microsoft put together to showcase IE9. Chrome 8 Safari 5 for Windows     Opera 10 Firefox 3.6     Internet Explorer 9 Beta (Note that it’s still beta) Internet Explorer 8

  Read the article

• SOA Suite 11g Dynamic Payload Testing with soapUI Free Edition

  - by Greg Mally

  Overview Many web service developers use soapUI for various tests like: smoke test, unit test, and load testing because you can get a free edition that is fairly robust. However, if you need to venture into more complex testing that requires a dynamic payload, then the free edition doesn't necessarily make it easy. This feature does exist in soapUI, but for obvious reasons it is in the Pro version. In this blog I will show you how to use soapUI free edition for dynamic payloads in a simplified example. Hopefully this will open the doors for you to expand into more complex scenarios. The following assumes that you have a working knowledge of soapUI and will not go into concepts like setting up a project etc. For the basics, please review the documentation for soapUI: http://www.soapui.org/Getting-Started/. Additionally, we will be using asynchronous web services and you can review the setup for this in my blog: SOA Suite 11g Asynchronous Testing with soapUI. Features in soapUI Free Edition Relating to this Topic The soapUI test tool provides a very feature rich environment that can do many things provided you are willing to go beyond point and click. For this example, we will be leveraging just a couple features for our dynamic payload example: Test Case Properties Scripting with Groovy Basically, we will be using a property as a global variable and we will manipulate that property using a Groovy script. Setting Up Our Property Properties are available throughout soapUI and here is a snippet from the soapUI website defining the locations: Projects : for handling Project scope values, for example a subscription ID TestSuite : for handling TestSuite scoped values, can be seen as "arguments" to a TestSuite TestCases : for handling TestCase scoped values, can be seen as "arguments" to a TestCase Properties TestStep : for providing local values/state within a TestCase Local TestStep properties : several TestStep types maintain their own list of properties specific to their functionality : DataSource, DataSink, Run TestCase MockServices : for handling MockService scoped values/arguments MockResponses : for handling MockResponse scoped values Global Properties : for handling Global properties, optionally from an external source For our example, we will be defining a custom property in a TestCase called SimpleAsyncPayload. The property can be created in either the Custom Properties tab located at the bottom of the Navigator panel when the TestCase is selected in the Navigator or the Properties label in the TestCase editor: Navigator Panel TestCase Editor You will notice that I set a value of “0” for the custom property. For this simplified example, we will need to retrieve that value and manipulate it prior to making the web service request invocation. In order to accomplish this, we will need to get Groovy ;) Let's Get Groovy We will now add a new Groovy Script step to the TestCase called Manipulate Payload: TestCase Editor > Append Step > Groovy Script Once we have added the Groovy Script step to our TestCase, we can open the Groovy Script editor to add the code to: Get the current value of the property we created called SimpleAsyncPayload. Convert the value of the property to an integer. Increment the value. Store the incremented value back into the TestCase property called SimpleAsyncPayload. The script should look something like the following: Groovy Script Editor – Manipulate Payload At this point we can test the script to see if it is working by simply running the TestCase (left-click on the green triangle in the upper left-hand corner of the TestCase editor). To verify if it ran correctly, we can look at the value of the SimpleAsyncPayload property which should now be 1: TestCase Editor – Run Results All that is left to complete the TestCase is to append another step of type Test Request. The information required to append the request is a name and an operation to invoke. In this example we will use the default name and select the SimpleAsyncBPELProcessBingd -> process as the operation (any other information being requested, simply use the defaults unless you are calling an asynchronous operation then do not add any assertions). We are now in familiar ground with the Test Request editor. Depending upon the type of operation you are invoking (synchronous or asynchronous), please update the request with the necessary information (e.g., callback information for asynchronous operations). We will now tweak the Test Request payload to retrieve the value of the SimpleAsyncPayload property. The soapUI editor makes this very simple: right-click in the payload and navigate to the property (e.g., right-click > Get Data.. > TestCase: [Groovy TestCase] > Property [SimpleAsyncPayload]): Test Request Editor – Insert Property Value Your payload should now look something like the following: Test Request Editor – Inserted Property Value Just like before, we are now ready to run the TestCase. If everything goes as expected we should see a response like the following: Message Viewer – Results of TestCase Run We are now setup to be able to run a stress test where the payload will change for each request. This simple example can be expanded to include multiple payload values, complex calculations in the scripts, or whatever can be done via the soapUI scripting. Hopefully you have found this useful and happy testing to you :)

  Read the article

• What are some concise and comprehensive introductory guide to unit testing for a self-taught programmer [closed]

  - by Superbest

  I don't have much formal training in programming and I have learned most things by looking up solutions on the internet to practical problems I have. There are some areas which I think would be valuable to learn, but which ended up both being difficult to learn and easy to avoid learning for a self-taught programmer. Unit testing is one of them. Specifically, I am interested in tests in and for C#/.NET applications using Microsoft.VisualStudio.TestTools in Visual Studio 2010 and/or 2012, but I really want a good introduction to the principles so language and IDE shouldn't matter much. At this time I'm interested in relatively trivial tests for small or medium sized programs (development time of weeks or months and mostly just myself developing). I don't necessarily intend to do test-driven development (I am aware that some say unit testing alone is supposed to be for developing features in TDD, and not an assurance that there are no bugs in the software, but unit testing is often the only kind of testing for which I have resources). I have found this tutorial which I feel gave me a decent idea of what unit tests and TDD looks like, but in trying to apply these ideas to my own projects, I often get confused by questions I can't answer and don't know how to answer, such as: What parts of my application and what sorts of things aren't necessarily worth testing? How fine grained should my tests be? Should they test every method and property separately, or work with a larger scope? What is a good naming convention for test methods? (since apparently the name of the method is the only way I will be able to tell from a glance at the test results table what works in my program and what doesn't) Is it bad to have many asserts in one test method? Since apparently VS2012 reports only that "an Assert.IsTrue failed within method MyTestMethod", and if MyTestMethod has 10 Assert.IsTrue statements, it will be irritating to figure out why a test is failing. If a lot of the functionality deals with writing and reading data to/from the disk in a not-exactly trivial fashion, how do I test that? If I provide a bunch of files as input by placing them in the program's directory, do I have to copy those files to the test project's bin/Debug folder now? If my program works with a large body of data and execution takes minutes or more, should my tests have it do the whole use all of the real data, a subset of it, or simulated data? If latter, how do I decide on the subset or how to simulate? Closely related to the previous point, if a class is such that its main operation happens in a state that is arrived to by the program after some involved operations (say, a class makes calculations on data derived from a few thousands of lines of code analyzing some raw data) how do I test just that class without inevitably ending up testing that class and all the other code that brings it to that state along with it? In general, what kind of approach should I use for test initialization? (hopefully that is the correct term, I mean preparing classes for testing by filling them in with appropriate data) How do I deal with private members? Do I just suck it up and assume that "not public = shouldn't be tested"? I have seen people suggest using private accessors and reflection, but these feel like clumsy and unsuited for regular use. Are these even good ideas? Is there anything like design patterns concerning testing specifically? I guess the main themes in what I'd like to learn more about are, (1) what are the overarching principles that should be followed (or at least considered) in every testing effort and (2) what are popular rules of thumb for writing tests. For example, at one point I recall hearing from someone that if a method is longer than 200 lines, it should be refactored - not a universally correct rule, but it has been quite helpful since I'd otherwise happily put hundreds of lines in single methods and then wonder why my code is so hard to read. Similarly I've found ReSharpers suggestions on member naming style and other things to be quite helpful in keeping my codebases sane. I see many resources both online and in print that talk about testing in the context of large applications (years of work, 10s of people or more). However, because I've never worked on such large projects, this context is very unfamiliar to me and makes the material difficult to follow and relate to my real world problems. Speaking of software development in general, advice given with the assumptions of large projects isn't always straightforward to apply to my own, smaller endeavors. Summary So my question is: What are some resources to learn about unit testing, for a hobbyist, self-taught programmer without much formal training? Ideally, I'm looking for a short and simple "bible of unit testing" which I can commit to memory, and then apply systematically by repeatedly asking myself "is this test following the bible of testing closely enough?" and then amending discrepancies if it doesn't.

  Read the article

• Different fan behaviour in my laptop after upgrade, what to do now?

  - by student

  After upgrading from lubuntu 13.10 to 14.04 the fan of my laptop seems to run much more often than in 13.10. When it runs, it doesn't run continously but starts and stops every second. fwts fan results in Results generated by fwts: Version V14.03.01 (2014-03-27 02:14:17). Some of this work - Copyright (c) 1999 - 2014, Intel Corp. All rights reserved. Some of this work - Copyright (c) 2010 - 2014, Canonical. This test run on 12/05/14 at 21:40:13 on host Linux einstein 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 x86_64. Command: "fwts fan". Running tests: fan. fan: Simple fan tests. -------------------------------------------------------------------------------- Test 1 of 2: Test fan status. Test how many fans there are in the system. Check for the current status of the fan(s). PASSED: Test 1, Fan cooling_device0 of type Processor has max cooling state 10 and current cooling state 0. PASSED: Test 1, Fan cooling_device1 of type Processor has max cooling state 10 and current cooling state 0. PASSED: Test 1, Fan cooling_device2 of type LCD has max cooling state 15 and current cooling state 10. Test 2 of 2: Load system, check CPU fan status. Test how many fans there are in the system. Check for the current status of the fan(s). Loading CPUs for 20 seconds to try and get fan speeds to change. Fan cooling_device0 current state did not change from value 0 while CPUs were busy. Fan cooling_device1 current state did not change from value 0 while CPUs were busy. ADVICE: Did not detect any change in the CPU related thermal cooling device states. It could be that the devices are returning static information back to the driver and/or the fan speed is automatically being controlled by firmware using System Management Mode in which case the kernel interfaces being examined may not work anyway. ================================================================================ 3 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ 3 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. Test Failure Summary ================================================================================ Critical failures: NONE High failures: NONE Medium failures: NONE Low failures: NONE Other failures: NONE Test |Pass |Fail |Abort|Warn |Skip |Info | ---------------+-----+-----+-----+-----+-----+-----+ fan | 3| | | | | | ---------------+-----+-----+-----+-----+-----+-----+ Total: | 3| 0| 0| 0| 0| 0| ---------------+-----+-----+-----+-----+-----+-----+ Here is the output of lsmod lsmod Module Size Used by i8k 14421 0 zram 18478 2 dm_crypt 23177 0 gpio_ich 13476 0 dell_wmi 12761 0 sparse_keymap 13948 1 dell_wmi snd_hda_codec_hdmi 46207 1 snd_hda_codec_idt 54645 1 rfcomm 69160 0 arc4 12608 2 dell_laptop 18168 0 bnep 19624 2 dcdbas 14928 1 dell_laptop bluetooth 395423 10 bnep,rfcomm iwldvm 232285 0 mac80211 626511 1 iwldvm snd_hda_intel 52355 3 snd_hda_codec 192906 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 102099 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30144 1 snd_seq_midi coretemp 13435 0 kvm_intel 143060 0 kvm 451511 1 kvm_intel snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi joydev 17381 0 serio_raw 13462 0 iwlwifi 169932 1 iwldvm pcmcia 62299 0 snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 29482 2 snd_pcm,snd_seq lpc_ich 21080 0 cfg80211 484040 3 iwlwifi,mac80211,iwldvm yenta_socket 41027 0 pcmcia_rsrc 18407 1 yenta_socket pcmcia_core 23592 3 pcmcia,pcmcia_rsrc,yenta_socket binfmt_misc 17468 1 snd 69238 17 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi soundcore 12680 1 snd parport_pc 32701 0 mac_hid 13205 0 ppdev 17671 0 lp 17759 0 parport 42348 3 lp,ppdev,parport_pc firewire_ohci 40409 0 psmouse 102222 0 sdhci_pci 23172 0 sdhci 43015 1 sdhci_pci firewire_core 68769 1 firewire_ohci crc_itu_t 12707 1 firewire_core ahci 25819 2 libahci 32168 1 ahci i915 783485 2 wmi 19177 1 dell_wmi i2c_algo_bit 13413 1 i915 drm_kms_helper 52758 1 i915 e1000e 254433 0 drm 302817 3 i915,drm_kms_helper ptp 18933 1 e1000e pps_core 19382 1 ptp video 19476 1 i915 I tried one answer to the similar question: loud fan on Ubuntu 14.04 and created a /etc/i8kmon.conf like the following: # Run as daemon, override with --daemon option set config(daemon) 1 # Automatic fan control, override with --auto option set config(auto) 1 # Status check timeout (seconds), override with --timeout option set config(timeout) 2 # Report status on stdout, override with --verbose option set config(verbose) 1 # Temperature thresholds: {fan_speeds low_ac high_ac low_batt high_batt} set config(0) {{0 0} -1 55 -1 55} set config(1) {{0 1} 50 60 55 65} set config(2) {{1 1} 55 80 60 85} set config(3) {{2 2} 70 128 75 128} With this setup the fan goes on even if the temperature is below 50 degree celsius (I don't see a pattern). However I get the impression that the CPU got's hotter in average than without this file. What changes from 13.10 to 14.04 may be responsible for this? If this is a bug, for which package I should report the bug?

  Read the article

< Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >