Search Results

Search found 10759 results on 431 pages for 'auto detect'.

Page 229/431 | < Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >

  • GeForce 9600GT support for dual monitor setup

    - by Theo
    I have a NVIDIA GeForce 9600 GT (point of view, link) on an Asus M2V-MX motherboard. The card has one DVI, HDMI and S-Video output. The graphics card does not seem to support dual monitors: the driver control panel for the graphics card does not detect a second monitor that is attached via S-Video (which leads me to believe that it doesn't support dual monitors with DVI and the other connections). Would it be possible to use a VGA/DVI splitter to attach two monitors to the single DVI output on the graphics card? Would this allow for a dual monitor setup, or only mirroring? How do I know if the graphic card supports this? With this particular motherboard, would it be possible to use the onboard video for another monitor?

    Read the article

  • CSS Fluid Grid Layout Problem

    - by Fuego DeBassi
    I have a max-width em based container for my layout. Within it I have many floated fixed width boxes, at 230px to be exact. At the max-width the container will expand to 90em's. This fit's 6 boxes per line perfectly. As the window sizes down and boxes are bumped to lower rows it leaves an ugly gap with the navigation above. I would like to force the container of the boxes to center them at all times. To illustrate: At full width: http://cl.ly/7393a462f44b8315aaba At smaller width: http://cl.ly/ff48a18d39c4f57c3513 How I would like smaller width to work: http://cl.ly/ae9c3fd04df515253b2d (Photoshoped) My markup looks like this: Biodesign Fusce massa felis, laoreet eu elementum sit amet, aliquam ut magna. Etiam et tellus in nisl vehicula ullamcorper. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Aenean nulla ante. Biodesign Fusce massa felis, laoreet eu elementum sit amet, aliquam ut magna. Etiam et tellus in nisl vehicula ullamcorper. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Aenean nulla ante. Biodesign Fusce massa felis, laoreet eu elementum sit amet, aliquam ut magna. Etiam et tellus in nisl vehicula ullamcorper. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Aenean nulla ante. Biodesign Fusce massa felis, laoreet eu elementum sit amet, aliquam ut magna. Etiam et tellus in nisl vehicula ullamcorper. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Aenean nulla ante. Biodesign Fusce massa felis, laoreet eu elementum sit amet, aliquam ut magna. Etiam et tellus in nisl vehicula ullamcorper. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Aenean nulla ante. Biodesign Fusce massa felis, laoreet eu elementum sit amet, aliquam ut magna. Etiam et tellus in nisl vehicula ullamcorper. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Aenean nulla ante. Biodesign Fusce massa felis, laoreet eu elementum sit amet, aliquam ut magna. Etiam et tellus in nisl vehicula ullamcorper. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Aenean nulla ante. My CSS, is: div#bricks { margin:0 auto; background:red; width:100%; } div.brick { background:#181c21; width:230px; margin:0 5px 10px 5px; position:relative; float:left; } div.brick img { background:#666; max-width:230px; } The #bricks is inside a #main, which looks like: div#main { margin:0 auto; padding:0 50px; position:relative; max-width:90em; } Would love some ideas!

    Read the article

  • What would I need to do to clone a Linux install to another machine?

    - by Marcus Hughes
    Basically, I want to make an image of one Linux install I have, and distribute it over similar (if not identical) spec machines on a network. I know it is possible, however am unsure of what needs to be done before I make the image of the install to ensure it works correctly on all machines. First think I know needs to be done, is remove all interface configuration, as I assume it would just jump to eth1 (and possibly use the same MAC), as it wont locate the network interface it had before, how would I do this so it auto detects and goes to eth0 again? Is there anything else I would need to do to the install before I make its image?

    Read the article

  • "Breadcrumbs" for series of hostnames?

    - by Hamy
    Does anyone know of a shell that would show a series of breadcrumbs as I navigate into/out of various servers, like this: Home > Build Machine > Vagrant > Docker-base Hopefully it could auto-detect logging in and out of various boxes and display the hostnames. Perhaps with a simple "no circular links", one could just try and monitor the hostname, but I don't know if there is a shell that can easily act as a 'parent' to the other shells on these various systems so that it can query hostname and/or other item. Any thoughts?

    Read the article

  • How to fix? => Your system administrator does not allow the user of saved credentials to log on to the remote computer

    - by Pure.Krome
    At our office, any of our Windows 7 Clients get this error message when we try and RDP to a remote W2K8 Server outside of the office :- Your system administrator does not allow the user of saved credentials to log on to the remote computer XXX because its identity is not fully verified. Please enter new credentials A quick google search leads to some posts they all suggest I edit group policy, etc. I'm under the impression, that the common fix for this, is to follow those instructions -per Windows7 machine-. Ack :( Is there anyway I can do something via our office Active Directory .. which auto updates all Windows 7 clients in the office LAN?

    Read the article

  • Windows 7 does not recognise second display output

    - by gilles27
    I've got a PC with dual BenQ G2222HDL monitors and an ATI Radeon HD 4650 video card. I've been running both monitors at 1920x1080 for some months now but last week the second monitor switched to a lower resolution and won't let me go back to 1920x1080. If I right click the Desktop and choose Screen Resolution from the menu, I get two items in the Display: drop down list BenQ G2222HDL D-SUB Display device on: VGA In the past 2 was always the same as 1. If I click Detect a third item appears Available display output on: ATI Radeon HD 4650 but if I use the Multiple displays: drop down list to use it says "No display detected" and then lets me choose from either "Connect anyway on S-Video" or "Connect anyway on Component", neither of which help. It seems like Windows 7 recognises the card is dual-head, and knows I have got two monitors, but can't link it all together. I have checked and all my drivers are up-to-date. Does anyone have any suggestions as to how I can get the second monitor working properly again?

    Read the article

  • Taskbar disappears sometimes when using a second monitor

    - by Alcenaia
    Windows 7 laptop, docked with a second monitor. This problem started happening when I started using the second monitor. The taskbar will often stop displaying. The Windows logo remains, but the bar, system tray, clock, and any icons for minimized programs disappear. I can see part of my desktop wallpaper where the taskbar should be. The taskbar is not set to auto-hide. Killing the explorer.exe process and starting it again temporarily fixes this. Is there a permanent solution? Thanks!

    Read the article

  • Static IPv6 address advertising and IPv6 autoconfig in Debian/Ubuntu

    - by Pascal
    I have a network that advertises IPv6 addresses through IPv6 autoconfig. To allow DNS lookups and to have fancy IP addresses, we setup "static" IPv6 addresses through /etc/network/interfaces: auto eth0 iface eth0 inet dhcp iface eth0 inet6 static address a:b:c:d:e::f netmask 64 Whenever we now connect through IPv6 Linux uses the IPv6 autoconfig address: a:b:c:d:21d:60ff:fe4a:479 and not the static IPv6 address: a:b:c:d:e::f A server on the other side only sees the autoconfig address. Is there a way to force linux (Debian/Ubuntu) to use the static address for outgoing packets? This is especially interesting for reverse DNS and firewall settings. I don't want to disable the IPv6 autoconfig since I don't have control over the settings the router advertises.

    Read the article

  • Configure PERL DBI and DBD in Linux

    - by Balualways
    I am new to Perl and I work in a Linux OEL 5x server. I am trying to configure the Perl DB modules for Oracle connectivity (DBD and DBI modules). Can anyone help me out in the installation procedure? I had tried CPAN didn't really worked out. Any help would be appreciated. I am not quite sure I need to initialize any variables other than $LD_LIBRARY_PATH and $ORACLE_HOME These are my observations: ISSUE:: I am getting the following issue while using the DBI module to connect to Oracle: install_driver(Oracle) failed: Can't locate loadable object for module DBD::Oracle in @INC (@INC contains: /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/5.8.8 .) at (eval 3) line 3 Compilation failed in require at (eval 3) line 3. Perhaps a module that DBD::Oracle requires hasn't been fully installed at connectdb.pl line 57 I had installed the DBD for oracle from /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi/DBD/DBD-Oracle-1.50 Could you please take a look into the steps and correct me if I am wrong: Observations: $ echo $LD_LIBRARY_PATH /opt/CA/UnicenterAutoSysJM/autosys/lib:/opt/CA/SharedComponents/Csam/SockAdapter/lib:/opt/CA/SharedComponents/ETPKI/lib:/opt/CA/CAlib $ echo $ORACLE_HOME /usr/local/oracle/ORA This is how I tried to install the DBD module: Download the file DBD 1.50 for Oracle Copy to /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi/DBD Untar and Makefile.PL . Message: Using DBI 1.52 (for perl 5.008008 on x86_64-linux-thread-multi) installed in /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi/auto/DBI/ Configuring DBD::Oracle for perl 5.008008 on linux (x86_64-linux-thread-multi) Remember to actually *READ* the README file! Especially if you have any problems. Installing on a linux, Ver#2.6 Using Oracle in /opt/oracle/product/10.2 DEFINE _SQLPLUS_RELEASE = "1002000400" (CHAR) Oracle version 10.2.0.4 (10.2) Found /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk Found /opt/oracle/product/10.2/rdbms/demo/demo_rdbms64.mk Found /opt/oracle/product/10.2/rdbms/lib/ins_rdbms.mk Using /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk Your LD_LIBRARY_PATH env var is set to '/usr/local/oracle/ORA/lib:/usr/dt/lib:/usr/openwin/lib:/usr/local/oracle/ORA/ows/cartx/wodbc/1.0/util/lib:/usr/local/oracle/ORA/lib:/usr/local/sybase/OCS-12_0/lib:/usr/local/sybase/lib:/home/oracle/jdbc/jdbcoci73/lib:./' WARNING: Your LD_LIBRARY_PATH env var doesn't include '/opt/oracle/product/10.2/lib' but probably needs to. Reading /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk Reading /usr/local/oracle/ORA/rdbms/lib/env_rdbms.mk Attempting to discover Oracle OCI build rules sh: make: command not found by executing: [make -f /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk build ECHODO=echo ECHO=echo GENCLNTSH='echo genclntsh' CC=true OPTIMIZE= CCFLAGS= EXE=DBD_ORA_EXE OBJS=DBD_ORA_OBJ.o] WARNING: Oracle build rule discovery failed (32512) Add path to make command into your PATH environment variable. Oracle oci build prolog: [sh: make: command not found] Oracle oci build command: [] WARNING: Unable to interpret Oracle build commands from /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk. (Will continue by using fallback approach.) Please report this to [email protected]. See README for what to include. Found header files in /opt/oracle/product/10.2/rdbms/public. client_version=10.2 DEFINE= -Wall -Wno-comment -DUTF8_SUPPORT -DORA_OCI_VERSION=\"10.2.0.4\" -DORA_OCI_102 Checking for functioning wait.ph System: perl5.008008 linux ca-build9.us.oracle.com 2.6.20-1.3002.fc6xen #1 smp thu apr 30 18:08:39 pdt 2009 x86_64 x86_64 x86_64 gnulinux Compiler: gcc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm Linker: not found Sysliblist: -ldl -lm -lpthread -lnsl -lirc Oracle makefiles would have used these definitions but we override them: CC: cc CFLAGS: $(GFLAG) $(OPTIMIZE) $(CDEBUG) $(CCFLAGS) $(PFLAGS)\ $(SHARED_CFLAG) $(USRFLAGS) [$(GFLAG) -O3 $(CDEBUG) -m32 $(TRIGRAPHS_CCFLAGS) -fPIC -I/usr/local/oracle/ORA/rdbms/demo -I/usr/local/oracle/ORA/rdbms/public -I/usr/local/oracle/ORA/plsql/public -I/usr/local/oracle/ORA/network/public -DLINUX -D_GNU_SOURCE -D_LARGEFILE64_SOURCE=1 -D_LARGEFILE_SOURCE=1 -DSLTS_ENABLE -DSLMXMX_ENABLE -D_REENTRANT -DNS_THREADS -fno-strict-aliasing $(LPFLAGS) $(USRFLAGS)] build: $(CC) $(ORALIBPATH) -o $(EXE) $(OBJS) $(OCISHAREDLIBS) [ cc -L$(LIBHOME) -L/usr/local/oracle/ORA/rdbms/lib/ -o $(EXE) $(OBJS) -lclntsh $(EXPDLIBS) $(EXOSLIBS) -ldl -lm -lpthread -lnsl -lirc -ldl -lm $(USRLIBS) -lpthread] LDFLAGS: $(LDFLAGS32) [-m32 -o $@ -L/usr/local/oracle/ORA/rdbms//lib32/ -L/usr/local/oracle/ORA/lib32/ -L/usr/local/oracle/ORA/lib32/stubs/] Linking with /usr/local/oracle/ORA/rdbms/lib/defopt.o -lclntsh -ldl -lm -lpthread -lnsl -lirc -ldl -lm -lpthread [from $(DEF_OPT) $(OCISHAREDLIBS)] Checking if your kit is complete... Looks good LD_RUN_PATH=/usr/local/oracle/ORA/lib Using DBD::Oracle 1.50. Using DBD::Oracle 1.50. Using DBI 1.52 (for perl 5.008008 on x86_64-linux-thread-multi) installed in /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi/auto/DBI/ Writing Makefile for DBD::Oracle Writing MYMETA.yml and MYMETA.json *** If you have problems... read all the log printed above, and the README and README.help.txt files. (Of course, you have read README by now anyway, haven't you?)

    Read the article

  • Active Directory Password Policy Problem

    - by Will
    To Clarify: my question is why isn't my password policy applying to people in the domain. Hey guys, having trouble with our password policy in Active Directory. Sometimes it just helps me to type out what I’m seeing It appears to not be applying properly across the board. I am new to this environment and AD in general but I think I have a general grasp of what should be going on. It’s a pretty simple AD setup without too many Group Policies being applied. It looks something like this DOMAIN Default Domain Policy (link enabled) Password Policy (link enabled and enforce) Personal OU Force Password Change (completely empty nothing in this GPO) IT OU Lockout Policy (link enabled and enforced) CS OU Lockout Policy Accouting OU Lockout Policy The password policy and default domain policy both define the same things under Computer ConfigWindows seetings sec settings Account Policies / Password Policy Enforce password History : 24 passwords remembered Maximum Password age : 180 days Min password age: 14 days Minimum Password Length: 6 characters Password must meet complexity requirements: Enabled Store Passwords using reversible encryption: Disabled Account Policies / Account Lockout Policy Account Lockout Duration 10080 Minutes Account Lockout Threshold: 5 invalid login attempts Reset Account Lockout Counter after : 30 minutes IT lockout This just sets the screen saver settings to lock computers when the user is Idle. After running Group Policy modeling it seems like the password policy and default domain policy is getting applied to everyone. Here is the results of group policy modeling on MO-BLANCKM using the mblanck account, as you can see the policies are both being applied , with nothing important being denied Group Policy Results NCLGS\mblanck on NCLGS\MO-BLANCKM Data collected on: 12/29/2010 11:29:44 AM Summary Computer Configuration Summary General Computer name NCLGS\MO-BLANCKM Domain NCLGS.local Site Default-First-Site-Name Last time Group Policy was processed 12/29/2010 10:17:58 AM Group Policy Objects Applied GPOs Name Link Location Revision Default Domain Policy NCLGS.local AD (15), Sysvol (15) WSUS-52010 NCLGS.local/WSUS/Clients AD (54), Sysvol (54) Password Policy NCLGS.local AD (58), Sysvol (58) Denied GPOs Name Link Location Reason Denied Local Group Policy Local Empty Security Group Membership when Group Policy was applied BUILTIN\Administrators Everyone S-1-5-21-507921405-1326574676-682003330-1003 BUILTIN\Users NT AUTHORITY\NETWORK NT AUTHORITY\Authenticated Users NCLGS\MO-BLANCKM$ NCLGS\Admin-ComputerAccounts-GP NCLGS\Domain Computers WMI Filters Name Value Reference GPO(s) None Component Status Component Name Status Last Process Time Group Policy Infrastructure Success 12/29/2010 10:17:59 AM EFS recovery Success (no data) 10/28/2010 9:10:34 AM Registry Success 10/28/2010 9:10:32 AM Security Success 10/28/2010 9:10:34 AM User Configuration Summary General User name NCLGS\mblanck Domain NCLGS.local Last time Group Policy was processed 12/29/2010 11:28:56 AM Group Policy Objects Applied GPOs Name Link Location Revision Default Domain Policy NCLGS.local AD (7), Sysvol (7) IT-Lockout NCLGS.local/Personal/CS AD (11), Sysvol (11) Password Policy NCLGS.local AD (5), Sysvol (5) Denied GPOs Name Link Location Reason Denied Local Group Policy Local Empty Force Password Change NCLGS.local/Personal Empty Security Group Membership when Group Policy was applied NCLGS\Domain Users Everyone BUILTIN\Administrators BUILTIN\Users NT AUTHORITY\INTERACTIVE NT AUTHORITY\Authenticated Users LOCAL NCLGS\MissingSkidEmail NCLGS\Customer_Service NCLGS\Email_Archive NCLGS\Job Ticket Users NCLGS\Office Staff NCLGS\CUSTOMER SERVI-1 NCLGS\Prestige_Jobs_Email NCLGS\Telecommuters NCLGS\Everyone - NCL WMI Filters Name Value Reference GPO(s) None Component Status Component Name Status Last Process Time Group Policy Infrastructure Success 12/29/2010 11:28:56 AM Registry Success 12/20/2010 12:05:51 PM Scripts Success 10/13/2010 10:38:40 AM Computer Configuration Windows Settings Security Settings Account Policies/Password Policy Policy Setting Winning GPO Enforce password history 24 passwords remembered Password Policy Maximum password age 180 days Password Policy Minimum password age 14 days Password Policy Minimum password length 6 characters Password Policy Password must meet complexity requirements Enabled Password Policy Store passwords using reversible encryption Disabled Password Policy Account Policies/Account Lockout Policy Policy Setting Winning GPO Account lockout duration 10080 minutes Password Policy Account lockout threshold 5 invalid logon attempts Password Policy Reset account lockout counter after 30 minutes Password Policy Local Policies/Security Options Network Security Policy Setting Winning GPO Network security: Force logoff when logon hours expire Enabled Default Domain Policy Public Key Policies/Autoenrollment Settings Policy Setting Winning GPO Enroll certificates automatically Enabled [Default setting] Renew expired certificates, update pending certificates, and remove revoked certificates Disabled Update certificates that use certificate templates Disabled Public Key Policies/Encrypting File System Properties Winning GPO [Default setting] Policy Setting Allow users to encrypt files using Encrypting File System (EFS) Enabled Certificates Issued To Issued By Expiration Date Intended Purposes Winning GPO SBurns SBurns 12/13/2007 5:24:30 PM File Recovery Default Domain Policy For additional information about individual settings, launch Group Policy Object Editor. Public Key Policies/Trusted Root Certification Authorities Properties Winning GPO [Default setting] Policy Setting Allow users to select new root certification authorities (CAs) to trust Enabled Client computers can trust the following certificate stores Third-Party Root Certification Authorities and Enterprise Root Certification Authorities To perform certificate-based authentication of users and computers, CAs must meet the following criteria Registered in Active Directory only Administrative Templates Windows Components/Windows Update Policy Setting Winning GPO Allow Automatic Updates immediate installation Enabled WSUS-52010 Allow non-administrators to receive update notifications Enabled WSUS-52010 Automatic Updates detection frequency Enabled WSUS-52010 Check for updates at the following interval (hours): 1 Policy Setting Winning GPO Configure Automatic Updates Enabled WSUS-52010 Configure automatic updating: 4 - Auto download and schedule the install The following settings are only required and applicable if 4 is selected. Scheduled install day: 0 - Every day Scheduled install time: 03:00 Policy Setting Winning GPO No auto-restart with logged on users for scheduled automatic updates installations Disabled WSUS-52010 Re-prompt for restart with scheduled installations Enabled WSUS-52010 Wait the following period before prompting again with a scheduled restart (minutes): 30 Policy Setting Winning GPO Reschedule Automatic Updates scheduled installations Enabled WSUS-52010 Wait after system startup (minutes): 1 Policy Setting Winning GPO Specify intranet Microsoft update service location Enabled WSUS-52010 Set the intranet update service for detecting updates: http://lavender Set the intranet statistics server: http://lavender (example: http://IntranetUpd01) User Configuration Administrative Templates Control Panel/Display Policy Setting Winning GPO Hide Screen Saver tab Enabled IT-Lockout Password protect the screen saver Enabled IT-Lockout Screen Saver Enabled IT-Lockout Screen Saver executable name Enabled IT-Lockout Screen Saver executable name sstext3d.scr Policy Setting Winning GPO Screen Saver timeout Enabled IT-Lockout Number of seconds to wait to enable the Screen Saver Seconds: 1800 System/Power Management Policy Setting Winning GPO Prompt for password on resume from hibernate / suspend Enabled IT-Lockout

    Read the article

  • Duplicate IP address detection with multiple NICs

    - by sfink
    I am using arping -D to detect duplicate IP addresses within a network when setting up servers. (The network is controlled by someone else, and we have had many issues with IP allocation in the past.) It works fine as long as my host has a single NIC on a given VLAN, but when my host has more than one (I have one with 9 NICs on one VLAN and 1 on the other), arping -D always returns false collisions. The problem is that all 9 of my NICs respond to an ARP request for any of the IPs on those NICs. (These are real physical NICs, not aliases or anything.) I send out one ARP request packet, and get 9 ARP is-at ARP replies, one for each MAC address. I could implement my own solution by sniffing packets and checking for any replies with a MAC address other than the local NICs', but it seems like there ought to be an easier way.

    Read the article

  • Macbook Pro Multiple Monitor Problem

    - by thinksocrates
    I have been using a Macbook pro (newest model) for about 4 weeks with dual monitors. It has been working great using the mac adaptor to dvi. Today however, my mac will not recognize it's built in monitor while the second monitor is plugged in. Plug in second monitor The screen on the laptop goes dark. The second monitor acts as the main screen. Click "Detect displays". Nothing happens Unplug the second monitor Screen on the laptop comes on. Any thoughts?

    Read the article

  • How to mount /tmp in /mnt on EC2?

    - by Claudio Poli
    I was wondering what is the best way to mount the /tmp endpoint in the ephemeral storage /mnt on an EC2 instance and give the ubuntu user default write permissions. Some suggest editing /etc/rc.local this way: mkdir -p /mnt/tmp && mount --bind -o nobootwait /mnt/tmp /tmp However that doesn't work for me (files differs). I tried editing the default fstab entry: /dev/xvdb /mnt auto defaults,nobootwait,comment=cloudconfig 0 2 replacing /mnt with /tmp and and giving it a umask=0777, however it doesn't work because of cloudconfig. I'm using Ubuntu 12.04. Thanks.

    Read the article

  • fills password and enters program automatically

    - by mark
    I am running Windows 7. In Internet Explorer 9, when I visit a webpage and enter a password it is automatically remembered. When I leave the site and return again at another time, the password is filled in automatically. I would like to stop this behavior. I do not not think that it is an auto fill problem. I think it may be related to an addon provided by my OEM and published by Authentic called "Truesuite Website Log On". How can I confirm that Truesuite is the culprit? How can I stop passwords from being filled in automatically.

    Read the article

  • Should we hire someone who writes C in Perl?

    - by paxdiablo
    One of my colleagues recently interviewed some candidates for a job and one said they had very good Perl experience. Since my colleague didn't know Perl, he asked me for a critique of some code written (off-site) by that potential hire, so I had a look and told him my concerns (the main one was that it originally had no comments and it's not like we gave them enough time). However, the code works so I'm loathe to say no-go without some more input. Another concern is that this code basically looks exactly how I'd code it in C. It's been a while since I did Perl (and I didn't do a lot, I'm more a Python bod for quick scripts) but I seem to recall that it was a much more expressive language than what this guy used. I'm looking for input from real Perl coders, and suggestions for how it could be improved (and why a Perl coder should know that method of improvement). You can also wax lyrical about whether people who write one language in a totally different language should (or shouldn't be hired). I'm interested in your arguments but this question is primarily for a critique of the code. The spec was to successfully process a CSV file as follows and output the individual fields: User ID,Name , Level,Numeric ID pax, Pax Morgan ,admin,0 gt," Turner, George" rubbish,user,1 ms,"Mark \"X-Men\" Spencer","guest user",2 ab,, "user","3" The output was to be something like this (the potential hire's code actually output this): User ID,Name , Level,Numeric ID: [User ID] [Name] [Level] [Numeric ID] pax, Pax Morgan ,admin,0: [pax] [Pax Morgan] [admin] [0] gt," Turner, George " rubbish,user,1: [gt] [ Turner, George ] [user] [1] ms,"Mark \"X-Men\" Spencer","guest user",2: [ms] [Mark "X-Men" Spencer] [guest user] [2] ab,, "user","3": [ab] [] [user] [3] Here is the code they submitted: #!/usr/bin/perl # Open file. open (IN, "qq.in") || die "Cannot open qq.in"; # Process every line. while (<IN>) { chomp; $line = $_; print "$line:\n"; # Process every field in line. while ($line ne "") { # Skip spaces and start with empty field. if (substr ($line,0,1) eq " ") { $line = substr ($line,1); next; } $field = ""; $minlen = 0; # Detect quoted field or otherwise. if (substr ($line,0,1) eq "\"") { $line = substr ($line,1); $pastquote = 0; while ($line ne "") { # Special handling for quotes (\\ and \"). if (length ($line) >= 2) { if (substr ($line,0,2) eq "\\\"") { $field = $field . "\""; $line = substr ($line,2); next; } if (substr ($line,0,2) eq "\\\\") { $field = $field . "\\"; $line = substr ($line,2); next; } } # Detect closing quote. if (($pastquote == 0) && (substr ($line,0,1) eq "\"")) { $pastquote = 1; $line = substr ($line,1); $minlen = length ($field); next; } # Only worry about comma if past closing quote. if (($pastquote == 1) && (substr ($line,0,1) eq ",")) { $line = substr ($line,1); last; } $field = $field . substr ($line,0,1); $line = substr ($line,1); } } else { while ($line ne "") { if (substr ($line,0,1) eq ",") { $line = substr ($line,1); last; } if ($pastquote == 0) { $field = $field . substr ($line,0,1); } $line = substr ($line,1); } } # Strip trailing space. while ($field ne "") { if (length ($field) == $minlen) { last; } if (substr ($field,length ($field)-1,1) eq " ") { $field = substr ($field,0, length ($field)-1); next; } last; } print " [$field]\n"; } } close (IN);

    Read the article

  • Generating Thermal Printer (Zebra Printer) Sized PDFs for FedEx Labels

    - by Michael Hart
    Background I own a company which does a lot of FedEx Ground shipping. We have a 3rd party fulfillment center, which stores some of our inventory and at our request ships it. Zebra/Thermal printers are the most cost effective shipping label printers available and our 3rd party fulfillment center has one. I want to generate the labels locally then e-mail the 3rd party fulfillment center a PDF of the labels which they can then print out on their printer. Problem The trouble is, I can't seem to figure out how to print these 4" x 6" labels to a PDF, as FedEx (both ship manager and fedex.com) uses javascript to detect what printer I have. Question What's a clever way to send my 3rd party fulfillment center a PDF (or equivalent) of our 4" x 6" zebra thermal printer labels so they can print them out without re-entering the data?

    Read the article

  • HP ML115 with P400 Smart Array Controller

    - by John
    Hi, I have a HP ML115 server I have installed a HP P400 Smart Array Controller card, I also have 4 x 1TB Samsung Hard drives. I'm unable to get the the controller to detect the hard drives, I have changed the drives to SATA 1.5G without luck, I have also tried connecting a single 80GB Maxtor drive without luck The controller shows up just after boot and tries to initialize, The controller does not show up in the POST prompt, although I can see the controller when booting off a ACU CD THe controller firmware is a little old v4.12 but I have no way to update it. Any ideas on how I can get this going?

    Read the article

  • How to compile a gvim from source using the latest version

    - by Kit Ho
    I'm using Ubuntu. I performed the following commands in the vim source folder: sudo apt-get build-dep vim ./configure --with-features=huge --enable-gui=gtk2 --enable-rubyinterp=yes --enable-pythoninterp=yes make sudo make install I have found that related posts but fail in Ubuntu 13.04 Update: sorry for not providing enough error msg here is the error after do the .configure checking --enable-gui argument... no GUI support How can i let the system to find the GUI library? I have try to do apt-get build-dep vim the gui lib should be included, but no luck what else can i do? i have also tried --enable-gui=<auto, gtk, gtk2, gnome2> all of them show the same error no GUI support...

    Read the article

  • Wireless networking on Gnome on Ubuntu 9 / 10

    - by WaveyDavey
    So here's my problem: I have some netbooks (ASUS eee, and ACER Aspire Ones) that I've been tasked to set up as kiosk machines, locked up tight for normal users. I am a command-line, server man, so this gnome malarkey is all a bit new to me. I found a lovely 9.04 kiosk livecd that installs and runs exactly as I want it to, but I can't get the wireless working. So I dropped on a full 10.4 distro, and wireless works straight out of the box (so hardware is good) - all I needed to do was right-click on the network connection icon, enter my SSID and password (WPA/WPA2) and away it went, perfect. Further investigation on 10.4 distro shows that /etc/networking/interfaces is virtually empty (just auto lo iface lo inet loopback in it), even after I have set up the wireless thru the gnome taskbar applet (is that the right word?). So where does gnome / ubuntu store the network settings to bring the blasted wireless connection up, and what do I need to do on the kiosk version to get wireless running?

    Read the article

  • Basic networking problem with Ubuntu 9.04 on Acer Extensa 5635Z laptop

    - by sapporo
    I just installed Ubuntu 9.04 on a brand new Acer Extensa 5635Z laptop, but ethernet networking does't work (wireless doesn't work either, but I'd be happy with ethernet for now). eth0 isn't listed in /etc/network/interfaces: $ cat /etc/network/interfaces auto lo iface lo inet loopback lshw does show the nic, but I can't make much sense out of the information: $ sudo lshw -class network -sanitize *-network DISABLED description: Wireless interface product: AR928X Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:07:00.0 logical name: wmaster0 version: 01 serial: [REMOVED] width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath9k latency=0 module=ath9k multicast=yes wireless=IEEE 802.11bgn *-network UNCLAIMED description: Ethernet controller product: Attansic Technology Corp. vendor: Attansic Technology Corp. physical id: 0 bus info: pci@0000:09:00.0 version: c0 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd cap_list configuration: latency=0 *-network DISABLED description: Ethernet interface physical id: 1 logical name: pan0 serial: [REMOVED] capabilities: ethernet physical configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes Thanks for your help!

    Read the article

  • ubuntu automount: only mounting drives as root?

    - by glisignoli
    I'm sharing the /mount dir with smb so users on my network can access use drives added to my linux box. Users are able to read files but not write, modify or delete files or directories. I'm using ubuntu 10.04 server edition with halevt installed for usb auto mounting. Afaik halevt is automounting the drives to /media/ but the drives are showing up as: drwxrwxr-x 1 root root 20480 2010-12-29 20:40 disk drwxrwxr-x 1 root root 24576 2010-12-21 17:20 Sparta mount gives me: /dev/sda1 on /boot type ext2 (rw) /dev/sdb1 on /media/disk type fuseblk (rw,nosuid,nodev,sync,allow_other,blksize=4096,default_permissions) /dev/sdc1 on /media/Sparta type fuseblk (rw,nosuid,nodev,sync,allow_other,blksize=4096,default_permissions) When I umount the drives, the folders /media/disk and /media/Sparta are both removed. I tried changing the permissions with chown to nobody:nogroup but it doesn't work (which I assume is because they are ntfs drives).

    Read the article

  • Keeping local windows folder in sync with remote ftp folder in real time

    - by bobo
    I know it has been asked before, but I would like it to happen in real time and transparently (without the need to open a separate FTP client such as FileZilla). For example, if I edit a text file in the local folder and then save it, it should immediately detect it and push the changes to the remote folder. It can be unidirectional (changes made on the local folder has to be pushed to the remote folder but the reverse is not necessary). It should also be able to specify some excluded files/folders which do not need to be in sync. Is there such an application that you know of?

    Read the article

  • setting heigth of div equal to containing div

    - by Syom
    i have the following script <div id="content"> <div id="left"> <div id="menu"> <ul> <li>menu</li> </ul> </div> <div id="left_ad"> </div> </div> <div id="middle"> some text here... </div> <div id="right"> <div id="right_ad"> <div id="ad2"> </div> </div> </div> </div> css: #content { margin: 0; padding: 0; overflow: hidden; position: relative; } #left { float: left; width:25%; margin-left:0; margin-right:0; margin-top:0; margin-bottom:-5000px; padding-left:0; padding-right:0; padding-top:0; padding-bottom:5000px; } #middle { background-image:url("http://localhost/kino/img/theme.png"); background-repeat:no-repeat; float: left; width:50%; margin-left:0; margin-right:0; margin-top:0; margin-bottom:-5000px; padding-left:0; padding-right:0; padding-top:0; padding-bottom:5000px; } #right { float: left; width:25%; margin-left:0; margin-right:-1px; margin-top:0; margin-bottom:-5000px; padding-left:0; padding-right:0; padding-top:0; padding-bottom:5000px; } #left_ad { background-image:url("http://localhost/kino/img/lens1.png"); background-repeat:no-repeat; min-height:498px; margin-left: auto; margin-right: auto; margin-top:31px; padding:0; width: 188px; position: relative; height: 100%; } as you see, left, middle and right are have the same size of heigth, which is equal to max of them. and now, what is the question, i want left_ad to have the same heigth too. how can i set the heigth of left_id is equal to left? thanks

    Read the article

  • Silverlight DataGrid not stretching to accommodate all items in data source?

    - by bplus
    I'm having problems getting a Silverlight DataGrid to stretch to accommodate all the items in it's dataSource. I've got a Grid that contains two DataGrids. I've tried setting height=Auto on the Grid and the DataGrids. I've tried setting HorizontalContentAlignment="Stretch" on the Grid and the DataGrids. The object tag has height="100%" I've set the Height="*" on the RowDefinitions for the Grid Any help would be very much appreciated! Here's the code listing: <UserControl x:Class="TimeSheet.SilverLight.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:local="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Data" mc:Ignorable="d"> <Grid x:Name="LayoutRoot" Height="Auto" ShowGridLines="True" HorizontalAlignment="Stretch" > <Grid.RowDefinitions> <RowDefinition Height="*"/> <RowDefinition Height="*"/> <RowDefinition Height="*"/> <RowDefinition Height="*"/> </Grid.RowDefinitions> <local:DataGrid BorderThickness="5" HorizontalContentAlignment="Stretch" AutoGenerateColumns="False" VerticalAlignment="Top" x:Name="NonProjectGrid" Grid.Row="0"> <local:DataGrid.Columns> <local:DataGridTextColumn Header="Activity" Binding="{Binding TaskName}" /> <local:DataGridTextColumn Header="Monday" Binding="{Binding Monday, Mode=TwoWay}" /> <local:DataGridTextColumn Header="Tuesday" Binding="{Binding Tuesday, Mode=TwoWay}" /> <local:DataGridTextColumn Header="Wednesday" Binding="{Binding Wednesday, Mode=TwoWay}" /> <local:DataGridTextColumn Header="Thursday" Binding="{Binding Thursday, Mode=TwoWay}" /> <local:DataGridTextColumn Header="Friday" Binding="{Binding Friday, Mode=TwoWay}" /> <local:DataGridTextColumn Header="Saturday" Binding="{Binding Saturday, Mode=TwoWay}" /> <local:DataGridTextColumn Header="Sunday" Binding="{Binding Sunday, Mode=TwoWay}" /> </local:DataGrid.Columns> </local:DataGrid> <local:DataGrid BorderThickness="5" HorizontalContentAlignment="Stretch" AutoGenerateColumns="False" VerticalAlignment="Top" x:Name="ProjectGrid" Grid.Row="2"> <local:DataGrid.Columns> <local:DataGridTextColumn Header="Bug Number" Binding="{Binding BugNo}" /> <local:DataGridTextColumn Header="Activity" Binding="{Binding TaskName}" /> <local:DataGridTextColumn Header="Monday" Binding="{Binding Monday, Mode=TwoWay}" /> <local:DataGridTextColumn Header="Tuesday" Binding="{Binding Tuesday, Mode=TwoWay}" /> <local:DataGridTextColumn Header="Wednesday" Binding="{Binding Wednesday, Mode=TwoWay}" /> <local:DataGridTextColumn Header="Thursday" Binding="{Binding Thursday, Mode=TwoWay}" /> <local:DataGridTextColumn Header="Friday" Binding="{Binding Friday, Mode=TwoWay}" /> <local:DataGridTextColumn Header="Saturday" Binding="{Binding Saturday, Mode=TwoWay}" /> <local:DataGridTextColumn Header="Sunday" Binding="{Binding Sunday, Mode=TwoWay}" /> </local:DataGrid.Columns> </local:DataGrid> <Button Name="AddBugBtn" Width="125" Height="25" Content="Add From Bugzilla" Click="AddBug_Click" Grid.Row="3" HorizontalAlignment="Right"></Button> <Button Name="SaveBtn" Width="125" Height="25" Content="Save" Click="Save_Click" Grid.Row="3" HorizontalAlignment="Left"></Button> </Grid>

    Read the article

  • Email sent from server with rDNS & SPF being blocked by Hotmail

    - by Canadaka
    I have been unable to send email to users on hotmail or other Microsoft email servers for some time. Its been a major headache trying to find out why and how to fix the issue. The emails being sent that are blocked from my domain canadaka.net. I use Google Aps to host my regular email serverice for my @canadaka.net email addresses. I can sent email from my desktop or gmail to a hotmail without any problem. But any email sent from my server on behalf of canadaka.net is blocked, not even arriving in the junk email. The IP that the emails are being sent from is the same IP that my site is hosted on: 66.199.162.177 This IP is new to me since August 2010, I had a different IP for the previous 3-4 years. This IP is not on any credible spam lists http://www.anti-abuse.org/multi-rbl-check-results/?host=66.199.162.177 The one list spamcannibal.org my IP is listed on seems to be out of my control, says "no reverse DNS, MX host should have rDNS - RFC1912 2.1". But since I use Google for my email hosting, I don't have control over setting up RDNS for all the MX records. I do have Reverse DNS setup for my IP though, it resolves to "mail.canadaka.net". I have signed up for SNDS and was approved. My ip says "All of the specified IPs have normal status." Sender Score: 100 https://www.senderscore.org/lookup.php?lookup=66.199.162.177&ipLookup.x=55&ipLookup.y=14 My Mcafee threat level seems fine I have a TXT SPF record setup, I am currently using xname.org as my DNS, and they don't have a field for SPF, but their FAQ says to add the SPF info as a TXT entry. v=spf1 a include:_spf.google.com ~all Some "SPF checking" tools ive used detect that my domain has a valid SPF, but others don't. Like Microsoft's SPF wizard, i think this is because its specifically looking for an SPF record and not in the TXT. "No SPF Record Found. A and MX Records Available". From my home I can run "nslookup -type=TXT canadaka.net" and it returns: Server: google-public-dns-a.google.com Address: 8.8.8.8 Non-authoritative answer: canadaka.net text = "v=spf1 a include:_spf.google.com ~all" One strange thing I found is i'm unable to ping hotmail.com or msn.com or do a "telnet mail.hotmail.com 25". I am able to ping gmail.com and many other domains I tried. I tried changing my DNS servers to Google's Public DNS and did a ipconfig /flushdns but that had no effect. I am however able to connect with telnet to mx1.hotmail.com This is what the email headers look like when I send to a Google email server and I receive the email with no troubles. You can see that SPF is passing. Delivered-To: [email protected] Received: by 10.146.168.12 with SMTP id q12cs91243yae; Sun, 27 Feb 2011 18:01:49 -0800 (PST) Received: by 10.43.48.7 with SMTP id uu7mr4292541icb.68.1298858509242; Sun, 27 Feb 2011 18:01:49 -0800 (PST) Return-Path: Received: from canadaka.net ([66.199.162.177]) by mx.google.com with ESMTP id uh9si8493137icb.127.2011.02.27.18.01.45; Sun, 27 Feb 2011 18:01:48 -0800 (PST) Received-SPF: pass (google.com: domain of [email protected] designates 66.199.162.177 as permitted sender) client-ip=66.199.162.177; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 66.199.162.177 as permitted sender) [email protected] Message-Id: <[email protected] Received: from coruscant ([127.0.0.1]:12907) by canadaka.net with [XMail 1.27 ESMTP Server] id for from ; Sun, 27 Feb 2011 18:01:29 -0800 Date: Sun, 27 Feb 2011 18:01:29 -0800 Subject: Test To: [email protected] From: XXXX Reply-To: [email protected] X-Mailer: PHP/5.2.13 I can send to gmail and other email services fine. I don't know what i'm doing wrong! UPDATE 1 I have been removed from hotmails IP block and am now able to send emails to hotmail, but they are all going directly to the JUNK folder. UPDATE 2 I used Telnet to send a test message to port25.com, seems my SPF is not being detected. Result: neutral (SPF-Result: None) canadaka.net. SPF (no records) canadaka.net. TXT (no records) I do have a TXT record, its been there for years, I did change it a week ago. Other sites that allow you to check your SPF detect it, but some others like Microsofts Wizard doesn't. This iw what my SPF record in my xname.org DNS file looks like: canadaka.net. 86400 IN TXT "v=spf1 a include:_spf.google.com ~all" I did have a nameserver as my 4th option that doens't have the TXT records since it doens't support it. So I removed it from the list and instead added wtfdns.com as my 4th adn 5th nameservers, which does support TXT.

    Read the article

< Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >