Search Results

Search found 12687 results on 508 pages for 'pdf print'.

Page 229/508 | < Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >

• Wrong values reported by pyPDF for various box regions

  - by romor

  Using pyPdf, for most files I get matched results concerning various box's dimensions compared to what Acrobat reports. However for some files I get different values reported by pyPdf and Acrobat, like: pyPdf: artBox: 595.3 x 841.9 bleedBox: 595.3 x 841.9 cropBox: 595.3 x 841.9 trimBox: 517.3 x 754 Acrobat: artBox: 439.35 x 666.13 pt bleedBox: 439.35 x 666.13 pt cropBox: 439.35 x 666.13 pt trimBox: 439.35 x 666.13 pt I thought it's units issue, but then ratio between widths and heights doesn't match also, not mentioning trimBox mismatch Correct results are those reported by Acrobat of course. Does someone know why is this and is there a way I get correct dimensions by using pyPdf? Thanks couple of minutes later... After reading this question: Are PDF box coordinates relative or absolute? I figured I didn't considered uper left corner to be different then 0 (zero). It turned out that box starts at 77.95 x 87.87, so if we reduce reported values of trimBox by this values correct result is obtained. artBox: 0 x 0 bleedBox: 0 x 0 cropBox: 0 x 0 trimBox: 77.95 x 87.87 Other boxes seem with misleading values or I misinterpret them. Snippet: from pyPdf import PdfFileReader pdfread = PdfFileReader(file('my.pdf', 'rb')) page = 1 width = pdfread.getPage(page).trimBox[2]-pdfread.getPage(page).trimBox[0] height = pdfread.getPage(page).trimBox[3] - pdfread.getPage(page).trimBox[1] print width, height

  Read the article

• pyPDF - Retrieve page numbers from document

  - by SquidneyPoitier

  At the moment I'm looking into doing some PDF merging with pyPdf, but sometimes the inputs are not in the right order, so I'm looking into scraping each page for its page number to determine the order it should go in (e.g. if someone split up a book into 20 10-page PDFs and I want to put them back together). I have two questions - 1.) I know that sometimes the page number is stored in the document data somewhere, as I've seen PDFs that render on Adobe as something like [1243] (10 of 150), but I've read documents of this sort into pyPDF and I can't find any information indicating the page number - where is this stored? 2.) If avenue #1 isn't available, I think I could iterate through the objects on a given page to try to find a page number - likely it would be its own object that has a single number in it. However, I can't seem to find any clear way to determine the contents of objects. If I run: pdf.getPage(0).getContents() This usually either returns: {'/Filter': '/FlateDecode'} or it returns a list of IndirectObject(num, num) objects. I don't really know what to do with either of these and there's no real documentation on it as far as I can tell. Is anyone familiar with this kind of thing that could point me in the right direction?

  Read the article

• UIWebView autosize issue only on iOS 4.3

  - by troop231

  I am trying to figure out how to fix this bug that only occurs on iOS 4.3. When the application launches, it displays a PDF that is scaled to fit in the UIWebView. It behaves perfectly until you pinch to zoom on the document, and then rotate it, leaving behind a black area. If you don't pinch to zoom, it doesn't leave the black area. I don't understand why this is a iOS 4.3 only issue. Screenshot of the issue: I've been trying to solve this problem awhile now, and would greatly appreciate your help. Thank you. Screenshots of the .xib settings: The code I'm using is: .h: #import <UIKit/UIKit.h> @interface ViewController : UIViewController { UIWebView *webView; } @property (nonatomic) IBOutlet UIWebView *webView; @end .m: #import "ViewController.h" @interface ViewController () @end @implementation ViewController @synthesize webView; - (BOOL)shouldAutorotateToInterfaceOrientation: (UIInterfaceOrientation)interfaceOrientation { if (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPad) { return YES; } else { return (interfaceOrientation != UIInterfaceOrientationPortraitUpsideDown); } } - (void)viewDidLoad { [super viewDidLoad]; NSString *urlAddress = [[NSBundle mainBundle] pathForResource:@"test" ofType:@"pdf"]; NSURL *url = [NSURL fileURLWithPath:urlAddress]; NSURLRequest *requestObj = [NSURLRequest requestWithURL:url]; [webView loadRequest:requestObj]; } - (void)didReceiveMemoryWarning { [super didReceiveMemoryWarning]; } @end

  Read the article

• jquery mobile mPDF not rendering on form submission

  - by Adam

  Im trying to have the user submit form data to a mPDF page the will render a pdf with the data included. The problem Im having is that jquery mobile initializes the mPDF page not allowing the mPDF to render properly. Im trying to figure out how to stop jquery mobile from initializing the mPDF page. Just a note, when I remove query mobile the functionality works. HTML <form id="rxForm" method="post" action="rxPDF.php"> <input type="text" name="dueDate"></form> </form> <button id="printPDF">Submit</button> JQUERY $('#printPDF').on('click', function() { console.log('pdf'); $('#rxForm').submit(); return false; }); mPDF <?php include ("library/mpdf.php"); $dueDate = $_POST['dueDate']; $html = 'The date is '.$dueDate.''; $mpdf = new mPDF(); $mpdf->WriteHTML($html, 0); $mpdf->Output(); exit; ?> I appreciate anyone's help!

  Read the article

• How do I write recursive anonymous functions?

  - by James T Kirk

  In my continued effort to learn scala, I'm working through 'Scala by example' by Odersky and on the chapter on first class functions, the section on anonymous function avoids a situation of recursive anonymous function. I have a solution that seems to work. I'm curious if there is a better answer out there. From the pdf: Code to showcase higher order functions def sum(f: Int => Int, a: Int, b: Int): Int = if (a > b) 0 else f(a) + sum(f, a + 1, b) def id(x: Int): Int = x def square(x: Int): Int = x * x def powerOfTwo(x: Int): Int = if (x == 0) 1 else 2 * powerOfTwo(x-1) def sumInts(a: Int, b: Int): Int = sum(id, a, b) def sumSquares(a: Int, b: Int): Int = sum(square, a, b) def sumPowersOfTwo(a: Int, b: Int): Int = sum(powerOfTwo, a, b) scala> sumPowersOfTwo(2,3) res0: Int = 12 from the pdf: Code to showcase anonymous functions def sum(f: Int => Int, a: Int, b: Int): Int = if (a > b) 0 else f(a) + sum(f, a + 1, b) def sumInts(a: Int, b: Int): Int = sum((x: Int) => x, a, b) def sumSquares(a: Int, b: Int): Int = sum((x: Int) => x * x, a, b) // no sumPowersOfTwo My code: def sumPowersOfTwo(a: Int, b: Int): Int = sum((x: Int) => { def f(y:Int):Int = if (y==0) 1 else 2 * f(y-1); f(x) }, a, b) scala> sumPowersOfTwo(2,3) res0: Int = 12

  Read the article

• Serving .docx files through Php

  - by user275074

  Hi, I'm having issues when attempting to serve a .docx file using Php. When uploading the file I detect the file mime type and upload the file using the file with the correct extension based on the mime type; e.g. below: application/msword - doc application/vnd.openxmlformats-officedocument.wordprocessingml.document - docx When attempting to serve the files for download, I do the reverse in detecting the extension and serving based on the mime type e.g. public static function fileMimeType($extention) { if(!is_null($extention)) { switch($extention) { case 'txt': return 'text/plain'; break; case 'odt': return 'application/vnd.oasis.opendocument.text'; break; case 'doc': return 'application/msword'; break; case 'docx': return 'application/vnd.openxmlformats-officedocument.wordprocessingml.document'; break; case ('jpg' || 'jpeg'): return 'image/jpeg'; break; case 'png': return 'image/png'; break; case 'pdf': return 'application/pdf'; break; default: break; } } } All files appear to download correctly and open fine but when attempting to open a docx file, Word (on multiple files) throws a error stating the file is corrupt. Any ideas would be great, thanks.

  Read the article

• Pass object from webserver to client

  - by user362914

  I developed a C# web application that calls a web-service which returns a base64 encoded array (PDF file). I then convert that array into a UCOMIStream object (I know it is obsolete, but the DLL that I am using requires it as a parameter). I use the following code to do the conversion which works perfectly. I can pass this object to the DLL so that I can print the PDF. This works great on the Webserver, but the requirement is to print it locally. Byte[] bBuffer = statementOut.statementcycle.statementdata.content; int size = bBuffer.Length; IntPtr mem = Marshal.AllocHGlobal(size); Marshal.Copy(bBuffer, 0, mem, size); // Create an OLE Stream object. System.Runtime.InteropServices.UCOMIStream str; //obsolete but the createstreamonhglobal outputs it CreateStreamOnHGlobal(mem, true, out str); The DLL resides on the client so I am able to use ActiveX to create the object using javascript and/or VBscript;however, I have not been able to figure out how to get the stream object to the client to pass to the DLL. How can this be achieved?

  Read the article

• Remove duplication's from my DropDownList

  - by user2976270

  In my controller i am returning list of my object with specific property: public ActionResult Index() { List<MyObject> list = db.MyObjects.Where(x => x.family == "Web").ToList(); ViewBag.Files = new SelectList(list, "Id", "protocol"); return View(); } This is my object: public class MyObject { public int id { get; set; } public string fileName { get; set; } public string browser { get; set; } public string protocol { get; set; } public string family { get; set; } } Index.cshtml: @Html.DropDownList("File", new SelectList(ViewBag.Files, "Id", "protocol_site"), "Select webmail site", new { style = "vertical-align:middle;" }) And i try to made 2 changes with no succeed: Remove all the duplication protocol from my DropDownListfor exapmle if i have 10 objects : 9 is doc protocol and 1 pdf i wand to see in my DropDownList only 2 items: DOC and PDF and not all the 10 items. Sort this DropDownList in alphabet order

  Read the article

• PHP is truncating MSSQL Blob data (4096b), even after setting INI values. Am I missing one?

  - by Dutchie432

  I am writing a PHP script that goes through a table and extracts the varbinary(max) blob data from each record into an external file. The code is working perfectly, except when a file is over 4096b - the data is truncated at exactly 4096. I've modified the values for mssql.textlimit, mssql.textsize, and odbc.defaultlrl without any success. Am I missing something here? <?php ini_set("mssql.textlimit" , "2147483647"); ini_set("mssql.textsize" , "2147483647"); ini_set("odbc.defaultlrl", "0"); include_once('common.php'); $id=$_REQUEST['i']; $q = odbc_exec($connect, "Select id,filename,documentBin from Projectdocuments where id = $id"); if (odbc_fetch_row($q)){ echo "Trying $filename ... "; $fileName="projectPhotos/docs/".odbc_result($q,"filename"); if (file_exists($fileName)){ unlink($fileName); } if($fh = fopen($fileName, "wb")) { $binData=odbc_result($q,"documentBin"); fwrite($fh, $binData) ; fclose($fh); $size = filesize($fileName); echo ("$fileName<br />Done ($size)<br><br>"); }else { echo ("$fileName Failed<br>"); } } ?> OUTPUT Trying ... projectPhotos/docs/file1.pdf Done (4096) Trying ... projectPhotos/docs/file2.zip Done (4096) Trying ... projectPhotos/docsv3.pdf Done (4096) etc..

  Read the article

• Image not rendering in dompdf

  - by Venkat

  I am using codeIgniter and dompdf for my application for generating pdfs. The below code is the code which i am using to display an image. <div class=\"block_head\"> <h2>Image display</h2>"; $image_location = "/images/xxx.png"; $html .="<img src=\"".$image_location."\" width=\"200\" height=\"200\" /> </div>"; I tested and debugged all ways whether i am doing something wrong. Like this first i checked whether the path is wrong. This is path on the server. It's correct. I tested by echoing $html also it's showing perfectly path. When i clicked on that path image is displaying. But when i am trying to render it in pdf it's not displaying. Note: PDF is generating perfectly without image.

  Read the article

• Sending a file to an API - C#

  - by alex

  I'm trying to use an API which sends a fax. I have a PHP example below: (I will be using C# however) <?php //This is example code to send a FAX from the command line using the Simwood API //It is illustrative only and should not be used without the addition of error checking etc. $ch = curl_init("http://url-to-api-endpoint"); $fax_variables=array( 'user'=> 'test', 'password'=> 'test', 'sendat' => '2050-01-01 01:00', 'priority'=> 10, 'output'=> 'json', 'to[0]' => '44123456789', 'to[1]' => '44123456780', 'file[0]'=>'@/tmp/myfirstfile.pdf', 'file[1]' => '@/tmp/mysecondfile.pdf' ); print_r($fax_variables); curl_setopt ($ch, CURLOPT_POST, 1); curl_setopt ($ch, CURLOPT_POSTFIELDS, $fax_variables); curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); $result=curl_exec ($ch); $info = curl_getinfo($ch); $result['http_code']; curl_close ($ch); print_r($result); ?> My question is - in the C# world, how would I achieve the same result? Do i need to build a post request? Ideally, i was trying to do this using REST - and constructing a URL, and using HttpWebRequest (GET) to call the API

  Read the article

• Serving files (800MB) results in an empty file

  - by azz0r

  Hello, with the following code, small files are served fine, however large (see, 800MB and above) result in empty files! Would I need to do something with apache to solve this? <?php class Model_Download { function __construct($path, $file_name) { $this->full_path = $path.$file_name; } public function execute() { if ($fd = fopen ($this->full_path, "r")) { $fsize = filesize($this->full_path); $path_parts = pathinfo($this->full_path); $ext = strtolower($path_parts["extension"]); switch ($ext) { case "pdf": header("Content-type: application/pdf"); // add here more headers for diff. extensions header("Content-Disposition: attachment; filename=\"".$path_parts["basename"]."\""); // use 'attachment' to force a download break; default; header("Content-type: application/octet-stream"); header("Content-Disposition: filename=\"".$path_parts["basename"]."\""); break; } header("Content-length: $fsize"); header("Cache-control: private"); //use this to open files directly while(!feof($fd)) { $buffer = fread($fd, 2048); echo $buffer; } } fclose ($fd); exit; } }

  Read the article

• Unable to execute gs program: No such file or directory

  - by Imran

  I've setup CUPS + Avahi on my NAS box in order to enable AirPrint with my existing network printer. Printing a test page via CUPS and printing us lp works fine, and I am able to see my printer on the printer list on my iOS device. However when sending a print job from my iOS device the printer status is set to paused and doesnt print anything. When checking the error_logs I have found this line which I believe is causing the error. D [04/Sep/2012:03:20:25 +0100] [Job 11] Started filter gs (PID 7485) D [04/Sep/2012:03:20:25 +0100] [Job 11] Started filter pstops (PID 7486) D [04/Sep/2012:03:20:25 +0100] [Job 11] Set job-printer-state-message to "Unable to execute gs program: No such file or directory", current level=ERROR D [04/Sep/2012:03:20:25 +0100] [Job 11] PID 7485 (gs) stopped with status 1! D [04/Sep/2012:03:20:25 +0100] [Job 11] PID 7486 (pstops) stopped with status 1! D [04/Sep/2012:03:20:25 +0100] [Job 11] Backend returned status 1 (failed) D [04/Sep/2012:03:20:25 +0100] [Job 11] Printer stopped due to backend errors; please consult the error_log file for details. I have installed Ghostscript, so I'm not quite sure why its saying its unable to execute the program, unless there are configurations for GS that I havent set yet. Any ideas?

  Read the article

• Cannot cd to parent directory with cd dirname

  - by Sharjeel Sayed

  I have made a bash command which generates a one liner for restarting all Weblogic ( 8,9,10) instances on a server /usr/ucb/ps auwwx | grep weblogic | tr ' ' '\n' | grep security.policy | grep domain | awk -F'=' '{print $2}' | sed 's/weblogic.policy//' | sed 's/security\///' | sort | sed 's/^/cd /' | sed 's/$/ ; cd .. ; \/recycle_script_directory_path\/recycle/ ;' | tr '\n' ' ' To restart a Weblogic instance, the recycle ( /recycle_script_directory_path/recycle/) script needs to be initiated from within the domain directory as the recycle script pulls some application information from some .ini files in the domain directory. The following part of the script generates a line to cd to the parent directory of the app i.e. the domain directory sed 's/$/ ; cd .. ; \/recycle_script_directory\/recycle/ ;' | tr '\n' ' ' I am sure there is a better way to cd to the parent directory like cd dirname but every time i run the following cd command , it throws a "Variable syntax" error. cd $(dirname '/domain_directory_path/app_name') How do i incorporate the cd to the directory name in a better way ? Also are there any enhancements for my bash command Some info on my script 1) The following part lists out the weblogic instances running along with their full path /usr/ucb/ps auwwx | grep weblogic | tr ' ' '\n' | grep security.policy | grep domain | awk -F'=' '{print $2}' | sed 's/weblogic.policy//' | sed 's/security\///' | sort 2) The grep domain part is required since all domain names have domain as the suffix

  Read the article

• Add Network Printer drivers in Windows 7/Server 2008 R2?

  - by Matias Nino

  I'm running a 64 bit Windows 7 / Windows 2008 R2 workstation that I just installed. I need to add a printer that is shared on the network from a 32bit Windows 2000 print server. This is an HP LaserJet 5Si printer, the drivers for which HP tells me are automatically built into Windows 7/R2. However, whenever I connect to the printer or try to add it, I get the following screen: Upon clicking OK, I get this screen asking me to locate the driver: How can I possibly locate a driver that is SUPPOSED TO BE NATIVELY SUPPORTED on Windows 7/R2? The tough part is that this printer is one of many shared on a server and does not have a direct IP address. Even worse: I have no access to the print server so I cannot put the 64 bit drivers on there. Any ideas? UPDATE: HP doesn't make a Vista driver either. It claims it is natively supported by Vista and 7, which is true because I am able to create a local printer on a fake tcp/ip port and Windows lets me pick the proper driver. However, when adding from the network, Windows does not let me select a driver and demands an INF. I tried searching the entire sub-structure of the C:\Windows directory and could not find any INF files that contain HP information. The INF might be located somewhere in the Windows installation DVD, but all the files on the DVD are compressed and unrecognizable. UPDATE #2 I installed the proper printer driver as a local printer (with no printer attached) and it installed. However, this did not change the fact that it STILL asks me to provide drivers when connecting to the networked printer.

  Read the article

• Create SAMBA node trust relationship to Windows 2003 PDC server

  - by Rod Regier

  I am having problems creating a trust relationship between an OpenVMS/IA64 node running V/IA64 8.3-1H1, TCPIP 5.6 ECO 5, CIFS 1.1 ECO1 PS11 (SAMBA 3.0.28a) and Windows 2003 server running as a PDC. I do have two other OpenVMS/Alpha nodes running V/A 8.3, TCPIP 5.6 ECO 4, CIS 1.1 ECO1 PS10 (SAMBA 3.0.28a) with working trust relationships to the same Windows 2003 server. Looking for assistance in resolving the trust "handshake". \\ Details from failing node. Unless otherwise noted, corresponding files on working nodes are similar or identical. SMB.CONF extract: [global] server string = Samba %v running on %h (OpenVMS) workgroup = WILMA netbios name = %h security = DOMAIN encrypt passwords = Yes name resolve order = lmhosts host wins bcast Password server = * log file = /samba$log/log.%m printcap name = /sys$manager/ucx$printcap.dat guest account = DYMAX print command = print %f/queue=%p/delete/passall/name="""""%s""""" lprm command = delete/entry=%j map archive = No printing = OpenVMS net rpc testjoin [2010/08/13 16:09:28, 0] SAMBA$SRC:[SOURCE.RPC_CLIENT]CLI_PIPE.C;1:(2443) get_schannel_session_key: could not fetch trust account password for domain 'WILMA' [2010/08/13 16:09:28, 0] SAMBA$SRC:[SOURCE.UTILS]NET_RPC_JOIN.C;1:(72) net_rpc_join_ok: failed to get schannel session key from server W2K3AD2 for domain WILMA. Error was NT_STATUS_CANT_ACCESS_DOMAIN_I NFO Join to domain 'WILMA' is not valid net rpc join "-Uaccount%password" tdb_open_isam: error verifying status of file SAMBA$ROOT:[PRIVATE]secrets.tdb tdb_open_isam: errno value = 1 [2010/08/13 16:21:13, 0] SAMBA$SRC:[SOURCE.PASSDB]SECRETS.C;1:(72) Failed to open /SAMBA$ROOT/PRIVATE/secrets.tdb [2010/08/13 16:21:13, 0] SAMBA$SRC:[SOURCE.UTILS]NET_RPC.C;1:(322) error storing domain sid for WILMA tdb_open_isam: error verifying status of file SAMBA$ROOT:[PRIVATE]secrets.tdb tdb_open_isam: errno value = 1 [2010/08/13 16:21:13, 0] SAMBA$SRC:[SOURCE.PASSDB]SECRETS.C;1:(72) Failed to open /SAMBA$ROOT/PRIVATE/secrets.tdb [2010/08/13 16:21:13, 0] SAMBA$SRC:[SOURCE.UTILS]NET_RPC_JOIN.C;1:(409) error storing domain sid for WILMA Unable to join domain WILMA. \\ Example from other node: net rpc testjoin Join to 'WILMA' is OK

  Read the article

• Inter-vlan routing issues

  - by DKNUCKLES

  I've been brought in to help administer a network and I've run into an issue - I'm not sure why this one is beyond me, however I figure an extra set of eyes on the problem may help resolve the issue. I have an HP MSM720 controller and at the time I'm trying to set up a basic hotspot set up with access points. For the time being I'm just looking to have people authenticate with a PSK and access the internet and other resources (namely printers) on other vlans. The user authenticates and the DHCP server on the controller gives them a 192.168.1.0/24 address. They are able to successfully browse the internet and ping machines on other networks, however they are unable to print to network printers that sit on the same LANs as the very computers that wireless clients can ping. The (extremely simplified) topology is as follows Computers on the wireless 192.168.1.1 network are able to ping computers on the 192.168.0.0 network, however cannot ping or print to the printers on the same network. I'm baffled and I have no idea why this is the case. Can anyone shed some light on this for me? Can someone spot the error of my configuration? EDIT : It should be noted that for whatever reason other computers on the 10.0.100.0/24 network cannot even ping the gateway of the Wireless Access network (192.168.1.1) - I'm not sure if this is relevant. These are the VLANS listed on the controller.

  Read the article

• Printer deployment via Group Policy not working on a single system

  - by Aron Rotteveel

  One of my coworkers just got a new laptop running Windows 7 Pro x64. We use a GPO to deploy the printers to every system, but for some reason it is not working on this system. I have been breaking my head over this for the past 3 hours now without any result. The strange thing is that gpresult /H seems to indicate that the GPO did run. The hardware: Laptop: Windows 7 Professional x64 Print server: Windows Server 2008 x64 R1 HP Color LaserJet 2605dn HP LaserJet P2015 Driver packages on server: HP universal printer driver PCL5, both X86 as X64 Oddities and other info: GPO working flawlessly on every other system, including my own Windows 7 Ultimate X64 laptop gpresult /H shows the GPO being ran Windows Firewall completely disabled on the new laptop Below is the output for gpresult /H (in Dutch sadly, but I think you'll recognize it): Beleidsregels Windows-instellingen Printerverbindingen Pad Dominerend groepsbeleidsobject \\Server2008\HP Color LaserJet 2605dn Printers \\Server2008\HP LaserJet P2015 Printers Beheersjablonen Beleidsdefinities (ADMX-bestanden) opgehaald van de lokale computer. Configuratiescherm/Printers Beleid Instelling Dominerend groepsbeleidsobject Beperkingen van point-and-print Uitgeschakeld Printers Like I said, I have been trying to figure this out for the past few hours or so without any result, so you are my last hope. Any help is appreciated.

  Read the article

• Migrated SCOM 2007 R2 Reporting Services but reports are gone

  - by Gabriel Guimarães

  I've migrated Reporting Services on a SCOM 2007 R2 install, and noticed that the reports have not being copied. I can create a new report, but the ones I've had because of the management packs are gone. I've tried re-applying the Management Packs however it doesn't re-deploy them and when I try to access for example: Monitoring - Microsoft Windows Print Server - Microsoft Windows Server 2000 and 2003 Print Services - State View - select any item and click Alerts on the right menu. I get the following error: Date: 12/24/2010 12:40:35 PM Application: System Center Operations Manager 2007 R2 Application Version: 6.1.7221.0 Severity: Error Message: Cannot initialize report. Microsoft.Reporting.WinForms.ReportServerException: The item '/Microsoft.SystemCenter.DataWarehouse.Report.Library/Microsoft.SystemCenter.DataWarehouse.Report.Alert' cannot be found. (rsItemNotFound) at Microsoft.Reporting.WinForms.ServerReport.GetExecutionInfo() at Microsoft.Reporting.WinForms.ServerReport.GetParameters() at Microsoft.EnterpriseManagement.Mom.Internal.UI.Reporting.Parameters.ReportParameterBlock.Initialize(ServerReport serverReport) at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ReportForm.SetReportJob(Object sender, ConsoleJobEventArgs args) The report doesn't exist on the reporting services side. how do I re-deploy this reports? Any help is appreciated. Thanks in advance.

  Read the article

• Whitelist IP from google-authenticator in sshd pam

  - by spudwaffle

  My Ubuntu 12.04 server uses the google-authenticator pam module to provide two step authentication for ssh. I need to make it so that a certain IP does not need to type the verification code. The /etc/pam.d/sshd file is below: # PAM configuration for the Secure Shell service # Read environment variables from /etc/environment and # /etc/security/pam_env.conf. auth required pam_env.so # [1] # In Debian 4.0 (etch), locale-related environment variables were moved to # /etc/default/locale, so read that as well. auth required pam_env.so envfile=/etc/default/locale # Standard Un*x authentication. @include common-auth # Disallow non-root logins when /etc/nologin exists. account required pam_nologin.so # Uncomment and edit /etc/security/access.conf if you need to set complex # access limits that are hard to express in sshd_config. # account required pam_access.so # Standard Un*x authorization. @include common-account # Standard Un*x session setup and teardown. @include common-session # Print the message of the day upon successful login. session optional pam_motd.so # [1] # Print the status of the user's mailbox upon successful login. session optional pam_mail.so standard noenv # [1] # Set up user limits from /etc/security/limits.conf. session required pam_limits.so # Set up SELinux capabilities (need modified pam) # session required pam_selinux.so multiple # Standard Un*x password updating. @include common-password auth required pam_google_authenticator.so I've already tried adding a auth sufficient pam_exec.so /etc/pam.d/ip.sh line above the google-authenticator line, but I can't understand how to check an IP adress in the bash script.

  Read the article

• Running CGI With Perl under Apache Permission Problem

  - by neversaint

  I have the following entry under apache2.conf in my Debian box. AddHandler cgi-script .cgi .pl Options +ExecCGI ScriptAlias /cgi-bin/ /var/www/mychosendir/cgi-bin/ <Directory /var/www/mychosendir/cgi-bin> Options +ExecCGI -Indexes allow from all </Directory> Then I have a perl cgi script stored under these directories and permissions: nvs@somename:/var/www/mychosendir$ ls -lhR .: total 12K drwxr-xr-x 2 nvs nvs 4.0K 2010-04-21 13:42 cgi-bin ./cgi-bin: total 4.0K -rwxr-xr-x 1 nvs nvs 90 2010-04-21 13:40 test.cgi However when I tried to access it in the web browser: http://myhost.com/mychosendir/cgi-bin/test.cgi They gave me this error: [Wed Apr 21 15:26:09 2010] [error] [client 150.82.219.158] (8)Exec format error: exec of '/var/www/mychosendir/cgi-bin/test.cgi' failed [Wed Apr 21 15:26:09 2010] [error] [client 150.82.219.158] Premature end of script headers: test.cgi What's wrong with it? Update: I also have the following entry in my apache2.conf: <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> And the content of test.cgi is this: #!/usr/bin/perl -wT print "Content-type: text/html\n\n"; print "Hello, world!\n";

  Read the article

• Running CGI With Perl under Apache Permission Problem

  - by neversaint

  I have the following entry under apache2.conf in my Debian box. AddHandler cgi-script .cgi .pl Options +ExecCGI ScriptAlias /mychosendir/cgi-bin/ /var/www/mychosendir/cgi-bin/ <Directory /var/www/mychosendir/cgi-bin> Options +ExecCGI -Indexes allow from all </Directory> Then I have a perl cgi script stored under these directories and permissions: nvs@somename:/var/www/mychosendir$ ls -lhR .: total 12K drwxr-xr-x 2 nvs nvs 4.0K 2010-04-21 13:42 cgi-bin ./cgi-bin: total 4.0K -rwxr-xr-x 1 nvs nvs 90 2010-04-21 13:40 test.cgi However when I tried to access it in the web browser: http://myhost.com/mychosendir/cgi-bin/test.cgi They gave me this error: [Wed Apr 21 15:26:09 2010] [error] [client 150.82.219.158] (8)Exec format error: exec of '/var/www/mychosendir/cgi-bin/test.cgi' failed [Wed Apr 21 15:26:09 2010] [error] [client 150.82.219.158] Premature end of script headers: test.cgi What's wrong with it? Update: I also have the following entry in my apache2.conf: <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> And the content of test.cgi is this: #!/usr/bin/perl -wT print "Content-type: text/html\n\n"; print "Hello, world!\n";

  Read the article

• Generic RPM package for Python 2.x

  - by RaphDG

  I have a python application, it can run on Python = 2.6 and it's architecture independant. I need the rpm package of this application to be installed on Fedora 14 (python 2.7) and Centos 6.2 (python 2.6). I currently use mock to build one rpm package for each "flavour" and it works well. I apparently can't install the Centos compiled rpm on Fedora. It gives me this error message : error: Failed dependencies: python(abi) = 2.6 is needed by myapp-0.9.el6.noarch Here is the relevant part of my .spec file : %{!?python_sitelib: %global python_sitelib %(%{__python} -c "from distutils.sysconfig import get_python_lib; print(get_python_lib())")} %{!?python_sitearch: %global python_sitearch %(%{__python} -c "from distutils.sysconfig import get_python_lib; print(get_python_lib(1))")} Name: myapp Version: #VERSION# Release: #RELEASE#%{dist} Summary: myapp Group: Development/Languages License: Apache v2 Source0: %{name}-%{version}-#RELEASE#.tar.gz BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) BuildArch: noarch BuildRequires: python-devel BuildRequires: python-setuptools %description myapp %prep %setup -c %build %{__python} setup.py build %install %{__rm} -rf %{buildroot} %{__python} setup.py install -O1 --skip-build --root %{buildroot} Do I really have to use mock and build 2 rpms or is there another way to create a single generic 2.x rpm package ?

  Read the article

• Mod_Perl configuration for multiple domains

  - by daliaessam

  Reading the Mod_Perl module documentation, can we configure it on per domain basis, what I mean can we configure it to run on every domain or specific domain only. What I see in the docs is: Registry Scripts To enable registry scripts add to httpd.conf: Alias /perl/ /home/httpd/2.0/perl/ <Location /perl/> SetHandler perl-script PerlResponseHandler ModPerl::Registry PerlOptions +ParseHeaders Options +ExecCGI </Location> and now assuming that we have the following script: #!/usr/bin/perl print "Content-type: text/plain\n\n"; print "mod_perl 2.0 rocks!\n"; saved in /home/httpd/httpd-2.0/perl/rock.pl. Make the script executable and readable by everybody: % chmod a+rx /home/httpd/httpd-2.0/perl/rock.pl Of course the path to the script should be readable by the server too. In the real world you probably want to have a tighter permissions, but for the purpose of testing, that things are working, this is just fine. From what I understand above, we can run Perl scripts only from one specific folder that we put the directive above. So the question again, can we make this directive per domain for all domains or for specific number of domains?

  Read the article

• HP LaserJet 2550 has a carousel motor error

  - by Arlen Beiler

  I have a LaserJet 2550, and it's worked pretty good for a long time (except for some slowness a while back, spooling I think), but just recently it suddenly quit working. We moved this summer, but left it at our other place, and just recently when my Dad went over there to try to print something out, it didn't work. When you turn it on, you hear the fan give a false start (basically a quick pulse), and the carousel goes through its usual thing. Then it starts up in earnest like it's getting ready to print something. All of a sudden it just stops. Everything stops, and the three lower lights are steady. When I push the Go button, the Go light (bottom of the 3) turns off, but the other two stay on. I looked it up on the HP website and it says it is a carousel motor problem. I called HP, but they said it is out of warranty. I've opened the cover and held the switch with a screw driver so I could watch it, and it goes through its thing like I described (doesn't seem to make a difference whether the imaging drum is in or not), then when it stops it kind of seems to jump back a little bit (the carousel). I hope this all makes sense (I know you like details), and hopefully you also know what to do to fix it. Thanks.

  Read the article

< Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >