Search Results

Search found 32260 results on 1291 pages for 'post request'.

Page 229/1291 | < Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >

  • IP address reuse on macvlan devices

    - by Alex Bubnoff
    I'm trying to create easy to use and possibly simple testing environment for some product and got some strange behaviour of macvlan's. What I'm trying to achieve: make a toolset for one-line start/stop of lxc containers(via docker) bound to external ip(I have enough of it on host machine). So, I'm doing something like this: docker run -d -name=container_name container_image pipework eth1 container_name ip/prefix_len@gateway and pipework here does this: GUEST_IFNAME=ph$NSPID$eth1 ip link add link eth1 dev $GUEST_IFNAME type macvlan mode bridge ip link set eth1 up ip link set $GUEST_IFNAME netns $NSPID ip netns exec $NSPID ip link set $GUEST_IFNAME name eth1 ip netns exec $NSPID ip addr add $IPADDR dev eth1 ip netns exec $NSPID ip route delete default ip netns exec $NSPID ip link set eth1 up ip netns exec $NSPID ip route replace default via $GATEWAY ip netns exec $NSPID arping -c 1 -A -I eth1 $IPADDR And it works for first time per IP. But for second time and later packets for containers IP isn't getting into container, while all configuration seem fine. So it looks like this: External machine ? ping 212.76.131.212 ....silence.... Host machine root@ubuntu:~# ip link show eth1 2: eth1: mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:15:17:c9:e1:c9 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip addr show eth1 2: eth1: mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:15:17:c9:e1:c9 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# tcpdump -v -i eth1 icmp tcpdump: WARNING: eth1: no IPv4 address assigned tcpdump: listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes 00:00:46.542042 IP (tos 0x0, ttl 60, id 9623, offset 0, flags [DF], proto ICMP (1), length 84) 5.134.221.98 212.76.131.212: ICMP echo request, id 6718, seq 2345, length 64 00:00:47.549969 IP (tos 0x0, ttl 60, id 9624, offset 0, flags [DF], proto ICMP (1), length 84) 5.134.221.98 212.76.131.212: ICMP echo request, id 6718, seq 2346, length 64 00:00:48.558143 IP (tos 0x0, ttl 60, id 9625, offset 0, flags [DF], proto ICMP (1), length 84) 5.134.221.98 212.76.131.212: ICMP echo request, id 6718, seq 2347, length 64 00:00:49.566319 IP (tos 0x0, ttl 60, id 9626, offset 0, flags [DF], proto ICMP (1), length 84) 5.134.221.98 212.76.131.212: ICMP echo request, id 6718, seq 2348, length 64 00:00:50.573999 IP (tos 0x0, ttl 60, id 9627, offset 0, flags [DF], proto ICMP (1), length 84) 5.134.221.98 212.76.131.212: ICMP echo request, id 6718, seq 2349, length 64 ^C 5 packets captured 5 packets received by filter 0 packets dropped by kernel 1 packet dropped by interface Host machine, netns of container root@ubuntu:~# ip netns exec 32053 ip link show eth1 48: eth1@if2: mtu 1500 qdisc noqueue state UNKNOWN link/ether b2:12:f7:cc:a1:9d brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip netns exec 32053 ip addr show eth1 48: eth1@if2: mtu 1500 qdisc noqueue state UNKNOWN link/ether b2:12:f7:cc:a1:9d brd ff:ff:ff:ff:ff:ff inet 212.76.131.212/29 scope global eth1 inet6 fe80::b012:f7ff:fecc:a19d/64 scope link valid_lft forever preferred_lft forever root@ubuntu:~# ip netns exec 32053 tcpdump -v -i eth1 icmp tcpdump: listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes ....silence.... ^C 0 packets captured 0 packets received by filter 0 packets dropped by kernel So, can anyone say, what can it be? Can this be caused by not a bug in macvlan implementation? Is there any tools I can use to debug that configuration?

    Read the article

  • php-fpm + persistent sockets = 502 bad gateway

    - by leeoniya
    Put on your reading glasses - this will be a long-ish one. First, what I'm doing. I'm building a web-app interface for some particularly slow tcp devices. Opening a socket to them takes 200ms and an fwrite/fread cycle takes another 300ms. To reduce the need for both of these actions on each request, I'm opening a persistent tcp socket which reduces the response time by the aforementioned 200ms. I was hoping PHP-FPM would share the persistent connections between requests from different clients (and indeed it does!), but there are some issues which I havent been able to resolve after 2 days of interneting, reading logs and modifying settings. I have somewhat narrowed it down though. Setup: Ubuntu 13.04 x64 Server (fully updated) on Linode PHP 5.5.0-6~raring+1 (fpm-fcgi) nginx/1.5.2 Relevent config: nginx worker_processes 4; php-fpm/pool.d pm = dynamic pm.max_children = 2 pm.start_servers = 2 pm.min_spare_servers = 2 Let's go from coarse to fine detail of what happens. After a fresh start I have 4x nginx processes and 2x php5-fpm processes waiting to handle requests. Then I send requests every couple seconds to the script. The first take a while to open the socket connection and returns with the data in about 500ms, the second returns data in 300ms (yay it's re-using the socket), the third also succeeds in about 300ms, the fourth request = 502 Bad Gateway, same with the 5th. Sixth request once again returns data, except now it took 500ms again. The process repeats for several cycles after which every 4 requests result in 2x 502 Bad Gateways and 2x 500ms Data responses. If I double all the fpm pool values and have 4x php-fpm processes running, the cycles settles in with 4x successful 500ms responses followed by 4x Bad Gateway errors. If I don't use persistent sockets, this issue goes away but then every request is 500ms. What I suspect is happening is the persistent socket keeps each php-fpm process from idling and ties it up, so the next one gets chosen until none are left and as they error out, maybe they are restarted and become available on the next round-robin loop ut the socket dies with the process. I haven't yet checked the 'slowlog', but the nginx error log shows lots of this: *188 recv() failed (104: Connection reset by peer) while reading response header from upstream, client:... All the suggestions on the internet regarding fixing nginx/php-fpm/502 bad gateway relate to high load or fcgi_pass misconfiguration. This is not the case here. Increasing buffers/sizes, changing timeouts, switching from unix socket to tcp socket for fcgi_pass, upping connection limits on the system....none of this stuff applies here. I've had some other success with setting pm = ondemand rather than dynamic, but as soon as the initial fpm-process gets killed off after idling, the persistent socket is gone for all subsequent php-fpm spawns. For the php script, I'm using stream_socket_client() with a STREAM_CLIENT_PERSISTENT flag. A while/stream_select() loop to detect socket data and fread($sock, 4096) to grab the data. I don't call fclose() obviously. If anyone has some additional questions or advice on how to get a persistent socket without tying up the php-fpm processes beyond the request completion, or maybe some other things to try, I'd appreciate it. some useful links: Nginx + php-fpm - recv() error Nginx + php-fpm "504 Gateway Time-out" error with almost zero load (on a test-server) Nginx + PHP-FPM "error 104 Connection reset by peer" causes occasional duplicate posts http://www.linuxquestions.org/questions/programming-9/php-pfsockopen-552084/ http://stackoverflow.com/questions/14268018/concurrent-use-of-a-persistent-php-socket http://devzone.zend.com/303/extension-writing-part-i-introduction-to-php-and-zend/#Heading3 http://stackoverflow.com/questions/242316/how-to-keep-a-php-stream-socket-alive http://php.net/manual/en/install.fpm.configuration.php https://www.google.com/search?q=recv%28%29+failed+%28104:+Connection+reset+by+peer%29+while+reading+response+header+from+upstream+%22502%22&ei=mC1XUrm7F4WQyAHbv4H4AQ&start=10&sa=N&biw=1920&bih=953&dpr=1

    Read the article

  • NGINX - CORS error affecting only Firefox

    - by wiherek
    this is an issue with Nginx that affects only firefox. I have this config: http://pastebin.com/q6Yeqxv9 upstream connect { server 127.0.0.1:8080; } server { server_name admin.example.com www.admin.example.com; listen 80; return 301 https://admin.example.com$request_uri; } server { listen 80; server_name ankieta.example.com www.ankieta.example.com; add_header Access-Control-Allow-Origin $http_origin; add_header 'Access-Control-Allow-Methods' 'GET, POST, OPTIONS, PUT, PATCH, DELETE'; add_header 'Access-Control-Allow-Credentials' 'true'; add_header 'Access-Control-Allow-Headers' 'Access-Control-Request-Method,Access-Control-Request-Headers,Cache,Pragma,Authorization,Accept,Accept-Encoding,Accept-Language,Host,Referer,Content-Length,Origin,DNT,X-Mx-ReqToken,Keep-Alive,User-Agent,X-Requested-With,If-Modified-Since,Cache-Control,Content-Type'; return 301 https://ankieta.example.com$request_uri; } server { server_name admin.example.com; listen 443 ssl; ssl_certificate /srv/ssl/14182263.pem; ssl_certificate_key /srv/ssl/admin_i_ankieta.example.com.key; ssl_protocols SSLv3 TLSv1; ssl_ciphers ALL:!aNULL:!ADH:!eNULL:!LOW:!EXP:RC4+RSA:+HIGH:+MEDIUM; location / { proxy_pass http://connect; } } server { server_name ankieta.example.com; listen 443 ssl; ssl_certificate /srv/ssl/14182263.pem; ssl_certificate_key /srv/ssl/admin_i_ankieta.example.com.key; ssl_protocols SSLv3 TLSv1; ssl_ciphers ALL:!aNULL:!ADH:!eNULL:!LOW:!EXP:RC4+RSA:+HIGH:+MEDIUM; root /srv/limesurvey; index index.php; add_header 'Access-Control-Allow-Origin' $http_origin; add_header 'Access-Control-Allow-Methods' 'GET, POST, OPTIONS, PUT, PATCH, DELETE'; add_header 'Access-Control-Allow-Credentials' 'true'; add_header 'Access-Control-Allow-Headers' 'Access-Control-Request-Method,Access-Control-Request-Headers,Cache,Pragma,Authorization,Accept,Accept-Encoding,Accept-Language,Host,Referer,Content-Length,Origin,DNT,X-Mx-ReqToken,Keep-Alive,User-Agent,X-Requested-With,If-Modified-Since,Cache-Control,Content-Type'; client_max_body_size 4M; location / { try_files $uri $uri/ /index.php?q=$uri&$args; } location ~ /*.php$ { fastcgi_split_path_info ^(.+\.php)(/.+)$; #NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini include fastcgi_params; fastcgi_param SCRIPT_FILENAME /srv/limesurvey$fastcgi_script_name; # fastcgi_param HTTPS $https; fastcgi_intercept_errors on; fastcgi_pass 127.0.0.1:9000; } location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ { expires max; log_not_found off; } } this is basically an AngularJS app and a PHP app (LimeSurvey), served under two different domains by the same webserver (Nginx). AngularJS is in fact served by ConnectJS, which is proxied to by Nginx (ConnectJS listens only on localhost). In Firefox console I get this: Cross-Origin Request Blocked: The Same Origin Policy disallows reading the remote resource at https://ankieta.example.com/admin/remotecontrol. This can be fixed by moving the resource to the same domain or enabling CORS. which of course is annoying. Other browsers work fine (Chrome, IE). Any suggestions on this?

    Read the article

  • Configuring dhcp module in FreeRadius (3.0.2 - Centos 6.5)

    - by mixja
    I am using the REST module to authorise a DHCP request. I would like to send an explicit DHCP NAK if the authorisation fails, however the DHCP module seems to return immediately if there is a failure and just ignores the DHCP request without any response. Here is my DHCP module configuration - if rest.authorize is successful, the if (ok) control block is hit, but if rest.authorize fails the if (fail) is never hit. dhcp DHCP-Discover { rest.authorize if (fail) { update reply { DHCP-Message-Type = DHCP-Nak } } if (ok) { update reply { DHCP-Message-Type = DHCP-Offer } update reply { DHCP-Domain-Name-Server = x.x.x.x DHCP-Domain-Name-Server = x.x.x.x DHCP-Subnet-Mask = 255.255.255.0 DHCP-Router-Address = x.x.x.x DHCP-IP-Address-Lease-Time = 3600 DHCP-DHCP-Server-Identifier = x.x.x.x } mac2ip } } Below is the output after a 401 Unauthorized is received. I am wanting to achieve a temporary block on DHCP for a specified (small) period of time. However the FreeRADIUS behaviour is to ignore duplicate requests for same DHCP transaction, meaning DHCP on client is blocked until it begins a new transaction. If a DHCP NAK can be sent, the DHCP client will initiate a new transaction after each NAK (i.e. DHCP Discover), meaning FreeRADIUS will process each DHCP Discover from the client, and the block will be removed much closer to the desired block time. Tue Jun 3 03:00:57 2014 : Debug: (3) rest : Sending HTTP GET to "http://xxxxxx//api/v1/dhcp/80%3Aea%3A96%3A2a%3Ab6%3Aaa" Tue Jun 3 03:00:57 2014 : Debug: (3) rest : Processing response header Tue Jun 3 03:00:57 2014 : Debug: (3) rest : Status : 401 (Unauthorized) Tue Jun 3 03:00:57 2014 : Debug: (3) rest : Skipping attribute processing, no body data received Tue Jun 3 03:00:57 2014 : Debug: rlm_rest (rest): Released connection (4) Tue Jun 3 03:00:57 2014 : Debug: (3) modsingle[authorize]: returned from rest (rlm_rest) for request 3 Tue Jun 3 03:00:57 2014 : Debug: (3) [rest.authorize] = fail Tue Jun 3 03:00:57 2014 : Debug: (3) } # dhcp DHCP-Discover = fail Tue Jun 3 03:00:57 2014 : Debug: (3) Finished request 3. Tue Jun 3 03:00:57 2014 : Debug: Waking up in 0.2 seconds. Tue Jun 3 03:00:58 2014 : Debug: Waking up in 4.6 seconds. Received DHCP-Discover of id 7b0fb2de from 172.19.0.9:67 to 172.19.0.12:67 Tue Jun 3 03:00:59 2014 : Debug: (3) No reply. Ignoring retransmit. Tue Jun 3 03:00:59 2014 : Debug: Waking up in 2.9 seconds. Received DHCP-Discover of id 7b0fb2de from 172.19.0.9:67 to 172.19.0.12:67 Tue Jun 3 03:01:02 2014 : Debug: (3) No reply. Ignoring retransmit. Tue Jun 3 03:01:02 2014 : Debug: Waking up in 0.4 seconds. Tue Jun 3 03:01:02 2014 : Debug: (2) Cleaning up request packet ID 2064626397 with timestamp +56 Tue Jun 3 03:01:02 2014 : Debug: Waking up in 1999991.0 seconds. Received DHCP-Discover of id 7b0fb2de from 172.19.0.9:67 to 172.19.0.12:67 Tue Jun 3 03:01:06 2014 : Debug: (3) No reply. Ignoring retransmit. Tue Jun 3 03:01:06 2014 : Debug: Waking up in 3999983.1 seconds. Received DHCP-Discover of id 7b0fb2de from 172.19.0.9:67 to 172.19.0.12:67 Tue Jun 3 03:01:15 2014 : Debug: (3) No reply. Ignoring retransmit. Tue Jun 3 03:01:15 2014 : Debug: Waking up in 7999966.3 seconds. Received DHCP-Discover of id 7b0fb2de from 172.19.0.9:67 to 172.19.0.12:67 Tue Jun 3 03:01:23 2014 : Debug: (3) No reply. Ignoring retransmit. Tue Jun 3 03:01:23 2014 : Debug: Waking up in 15999942.1 seconds.

    Read the article

  • Debian dependency problems / partially installed

    - by Michael
    I tried to install curl support for php 5 on my debian squeeze machine and since I'm having problems. After trying to install curl I got dependency issues which I tried to solve by removing what started the issues. From one thing came another and I'm currently looking at ~29 issues when I try to do an apt-get upgrade. These issues vary from unable to config, dependency and unable to remove errors. I tried apt-get upgrade -f and installing packages using dpkg command. I tried removing using purge and force. I manually removed stuff to try and fix it. I tried running dpkg --configure -a. I've to say I'm still pretty new to linux so I'm out of idea's and cant seem to find an answer online that matches my problems. Here's a part of the apt-get upgrade command output: Reading package lists... Building dependency tree... Reading state information... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 29 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up libgeoip1 (1.4.7~beta6+dfsg-1) ... Bus error dpkg: error processing libgeoip1 (--configure): subprocess installed post-installation script returned error exit status 135 Setting up libisc62 (1:9.7.3.dfsg-1~squeeze3) ... Bus error dpkg: error processing libisc62 (--configure): subprocess installed post-installation script returned error exit status 135 dpkg: dependency problems prevent configuration of libdns69: libdns69 depends on libgeoip1 (>= 1.4.7~beta6+dfsg); however: Package libgeoip1 is not configured yet. libdns69 depends on libisc62; however: Package libisc62 is not configured yet. dpkg: error processing libdns69 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libisccc60: libisccc60 depends on libisc62; however: Package libisc62 is not configured yet. dpkg: error processing libisccc60 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libisccfg62: libisccfg62 depends on libdns69; however: Package libdns69 is not configured yet. .. continues Errors were encountered while processing: libgeoip1 libisc62 libdns69 libisccc60 libisccfg62 libbind9-60 liblwres60 bind9-host libavahi-core7 libdaemon0 avahi-daemon libexif12 libffi5 libgomp1 libgphoto2-port0 libgphoto2-2 libperl5.10 libsensors4 libsnmp15 libhpmud0 libieee1284-3 libnss-mdns libossp-uuid16 libpq5 libv4l-0 libsane libsane-hpaio libssh2-1 python-gobject dpkg --configure -a Setting up libpq5 (8.4.8-0squeeze2) ... Bus error dpkg: error processing libpq5 (--configure): subprocess installed post-installation script returned error exit status 135 Setting up libperl5.10 (5.10.1-17squeeze2) ... Bus error dpkg: error processing libperl5.10 (--configure): subprocess installed post-installation script returned error exit status 135 Setting up libffi5 (3.0.9-3) ... Bus error dpkg: error processing libffi5 (--configure): subprocess installed post-installation script returned error exit status 135 Setting up libexif12 (0.6.19-1) ... .. continues Suggestions are really welcome I really don't know what to do. Michael.

    Read the article

  • Passing data between android ListActivities in Java

    - by Will Janes
    I am new to Android! I am having a problem getting this code to work... Basically I Go from one list activity to another and pass the text from a list item through the intent of the activity to the new list view, then retrieve that text in the new list activity and then preform a http request based on value of that list item. Log Cat 04-05 17:47:32.370: E/AndroidRuntime(30135): FATAL EXCEPTION: main 04-05 17:47:32.370: E/AndroidRuntime(30135): java.lang.ClassCastException:android.widget.LinearLayout 04-05 17:47:32.370: E/AndroidRuntime(30135): at com.thickcrustdesigns.ufood.CatogPage$1.onItemClick(CatogPage.java:66) 04-05 17:47:32.370: E/AndroidRuntime(30135): at android.widget.AdapterView.performItemClick(AdapterView.java:284) 04-05 17:47:32.370: E/AndroidRuntime(30135): at android.widget.ListView.performItemClick(ListView.java:3731) 04-05 17:47:32.370: E/AndroidRuntime(30135): at android.widget.AbsListView$PerformClick.run(AbsListView.java:1959) 04-05 17:47:32.370: E/AndroidRuntime(30135): at android.os.Handler.handleCallback(Handler.java:587) 04-05 17:47:32.370: E/AndroidRuntime(30135): at android.os.Handler.dispatchMessage(Handler.java:92) 04-05 17:47:32.370: E/AndroidRuntime(30135): at android.os.Looper.loop(Looper.java:130) 04-05 17:47:32.370: E/AndroidRuntime(30135): at android.app.ActivityThread.main(ActivityThread.java:3691) 04-05 17:47:32.370: E/AndroidRuntime(30135): at java.lang.reflect.Method.invokeNative(Native Method) 04-05 17:47:32.370: E/AndroidRuntime(30135): at java.lang.reflect.Method.invoke(Method.java:507) 04-05 17:47:32.370: E/AndroidRuntime(30135): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:907) 04-05 17:47:32.370: E/AndroidRuntime(30135): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:665) 04-05 17:47:32.370: E/AndroidRuntime(30135): at dalvik.system.NativeStart.main(Native Method) ListActivity 1 package com.thickcrustdesigns.ufood; import java.util.ArrayList; import org.apache.http.NameValuePair; import org.apache.http.message.BasicNameValuePair; import org.json.JSONException; import org.json.JSONObject; import android.app.ListActivity; import android.content.Intent; import android.os.Bundle; import android.view.View; import android.widget.AdapterView; import android.widget.AdapterView.OnItemClickListener; import android.widget.Button; import android.widget.ListView; import android.widget.TextView; public class CatogPage extends ListActivity { ListView listView1; Button btn_bk; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.definition_main); btn_bk = (Button) findViewById(R.id.btn_bk); listView1 = (ListView) findViewById(android.R.id.list); ArrayList<NameValuePair> nvp = new ArrayList<NameValuePair>(); nvp.add(new BasicNameValuePair("request", "categories")); ArrayList<JSONObject> jsondefs = Request.fetchData(this, nvp); String[] defs = new String[jsondefs.size()]; for (int i = 0; i < jsondefs.size(); i++) { try { defs[i] = jsondefs.get(i).getString("Name"); } catch (JSONException e) { // TODO Auto-generated catch block e.printStackTrace(); } } uFoodAdapter adapter = new uFoodAdapter(this, R.layout.definition_list, defs); listView1.setAdapter(adapter); ListView lv = getListView(); lv.setOnItemClickListener(new OnItemClickListener() { @Override public void onItemClick(AdapterView<?> parent, View view, int position, long id) { TextView tv = (TextView) view; String p = tv.getText().toString(); Intent i = new Intent(getApplicationContext(), Results.class); i.putExtra("category", p); startActivity(i); } }); btn_bk.setOnClickListener(new View.OnClickListener() { public void onClick(View arg0) { Intent i = new Intent(getApplicationContext(), UFoodAppActivity.class); startActivity(i); } }); } } **ListActivity 2** package com.thickcrustdesigns.ufood; import java.util.ArrayList; import org.apache.http.NameValuePair; import org.apache.http.message.BasicNameValuePair; import org.json.JSONException; import org.json.JSONObject; import android.app.ListActivity; import android.os.Bundle; import android.widget.ListView; public class Results extends ListActivity { ListView listView1; enum Category { Chicken, Beef, Chinese, Cocktails, Curry, Deserts, Fish, ForOne { public String toString() { return "For One"; } }, Lamb, LightBites { public String toString() { return "Light Bites"; } }, Pasta, Pork, Vegetarian } @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); this.setContentView(R.layout.definition_main); listView1 = (ListView) findViewById(android.R.id.list); Bundle data = getIntent().getExtras(); String category = data.getString("category"); Category cat = Category.valueOf(category); String value = null; switch (cat) { case Chicken: value = "Chicken"; break; case Beef: value = "Beef"; break; case Chinese: value = "Chinese"; break; case Cocktails: value = "Cocktails"; break; case Curry: value = "Curry"; break; case Deserts: value = "Deserts"; break; case Fish: value = "Fish"; break; case ForOne: value = "ForOne"; break; case Lamb: value = "Lamb"; break; case LightBites: value = "LightBites"; break; case Pasta: value = "Pasta"; break; case Pork: value = "Pork"; break; case Vegetarian: value = "Vegetarian"; } ArrayList<NameValuePair> nvp = new ArrayList<NameValuePair>(); nvp.add(new BasicNameValuePair("request", "category")); nvp.add(new BasicNameValuePair("cat", value)); ArrayList<JSONObject> jsondefs = Request.fetchData(this, nvp); String[] defs = new String[jsondefs.size()]; for (int i = 0; i < jsondefs.size(); i++) { try { defs[i] = jsondefs.get(i).getString("Name"); } catch (JSONException e) { // TODO Auto-generated catch block e.printStackTrace(); } } uFoodAdapter adapter = new uFoodAdapter(this, R.layout.definition_list, defs); listView1.setAdapter(adapter); } } Request package com.thickcrustdesigns.ufood; import java.io.BufferedReader; import java.io.InputStream; import java.io.InputStreamReader; import java.util.ArrayList; import org.apache.http.HttpEntity; import org.apache.http.HttpResponse; import org.apache.http.NameValuePair; import org.apache.http.client.HttpClient; import org.apache.http.client.entity.UrlEncodedFormEntity; import org.apache.http.client.methods.HttpPost; import org.apache.http.impl.client.DefaultHttpClient; import org.json.JSONArray; import org.json.JSONObject; import android.content.Context; import android.util.Log; import android.widget.Toast; public class Request { @SuppressWarnings("null") public static ArrayList<JSONObject> fetchData(Context context, ArrayList<NameValuePair> nvp) { ArrayList<JSONObject> listItems = new ArrayList<JSONObject>(); InputStream is = null; try { HttpClient httpclient = new DefaultHttpClient(); HttpPost httppost = new HttpPost( "http://co350-11d.projects02.glos.ac.uk/php/database.php"); httppost.setEntity(new UrlEncodedFormEntity(nvp)); HttpResponse response = httpclient.execute(httppost); HttpEntity entity = response.getEntity(); is = entity.getContent(); } catch (Exception e) { Log.e("log_tag", "Error in http connection" + e.toString()); } // convert response to string String result = ""; try { BufferedReader reader = new BufferedReader(new InputStreamReader( is, "iso-8859-1"), 8); InputStream stream = null; StringBuilder sb = null; while ((result = reader.readLine()) != null) { sb.append(result + "\n"); } stream.close(); result = sb.toString(); } catch (Exception e) { Log.e("log_tag", "Error converting result " + e.toString()); } try { JSONArray jArray = new JSONArray(result); for (int i = 0; i < jArray.length(); i++) { JSONObject jo = jArray.getJSONObject(i); listItems.add(jo); } } catch (Exception e) { Toast.makeText(context.getApplicationContext(), "None Found!", Toast.LENGTH_LONG).show(); } return listItems; } } Any help would be grateful! Many Thanks EDIT Sorry very tired so missed out my 2nd ListActivity package com.thickcrustdesigns.ufood; import java.util.ArrayList; import org.apache.http.NameValuePair; import org.apache.http.message.BasicNameValuePair; import org.json.JSONException; import org.json.JSONObject; import android.app.ListActivity; import android.os.Bundle; import android.widget.ListView; public class Results extends ListActivity { ListView listView1; enum Category { Chicken, Beef, Chinese, Cocktails, Curry, Deserts, Fish, ForOne { public String toString() { return "For One"; } }, Lamb, LightBites { public String toString() { return "Light Bites"; } }, Pasta, Pork, Vegetarian } @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); this.setContentView(R.layout.definition_main); listView1 = (ListView) findViewById(android.R.id.list); Bundle data = getIntent().getExtras(); String category = data.getString("category"); Category cat = Category.valueOf(category); String value = null; switch (cat) { case Chicken: value = "Chicken"; break; case Beef: value = "Beef"; break; case Chinese: value = "Chinese"; break; case Cocktails: value = "Cocktails"; break; case Curry: value = "Curry"; break; case Deserts: value = "Deserts"; break; case Fish: value = "Fish"; break; case ForOne: value = "ForOne"; break; case Lamb: value = "Lamb"; break; case LightBites: value = "LightBites"; break; case Pasta: value = "Pasta"; break; case Pork: value = "Pork"; break; case Vegetarian: value = "Vegetarian"; } ArrayList<NameValuePair> nvp = new ArrayList<NameValuePair>(); nvp.add(new BasicNameValuePair("request", "category")); nvp.add(new BasicNameValuePair("cat", value)); ArrayList<JSONObject> jsondefs = Request.fetchData(this, nvp); String[] defs = new String[jsondefs.size()]; for (int i = 0; i < jsondefs.size(); i++) { try { defs[i] = jsondefs.get(i).getString("Name"); } catch (JSONException e) { // TODO Auto-generated catch block e.printStackTrace(); } } uFoodAdapter adapter = new uFoodAdapter(this, R.layout.definition_list, defs); listView1.setAdapter(adapter); } } Sorry again! Cheers guys!

    Read the article

  • Syntax error, unexpected '}' wordpress error

    - by Zach Johnson
    Hello I am not a PHP programmer so I have no idea what the problem is here. Basiclly I am trying to use a wordpress theme but I get this error The Parse error: syntax error, unexpected '}' in / home/a5618915/public_html/photo/wp-content/themes/iphoto/functions.php on line 1 I have no Idea what exactly is wrong in the php file. The code for the functions.php is below. If someone could point out whats wrong I would be really grateful. <?php define('THEME_NAME','iphoto'); load_theme_textdomain( THEME_NAME,TEMPLATEPATH .'/languages'); add_custom_background(); add_theme_support( 'automatic-feed-links' ); add_theme_support( 'post-formats', array( 'video')); if ( function_exists('register_nav_menus') ) { register_nav_menus(array('primary' => 'header')); } add_action('wp_ajax_b_ajax_post_action', 'b_ajax_callback'); function b_ajax_callback() { global $wpdb; if(isset($_POST['type']) && $_POST['type'] == 'upload') { $clickedID = $_POST['data']; $filename = $_FILES[$clickedID]; $filename['name'] = preg_replace('/[^a-zA-Z0-9._-]/', '', $filename['name']); $override['test_form'] = false; $override['action'] = 'wp_handle_upload'; $uploaded_file = wp_handle_upload($filename,$override); $upload_tracking[] = $clickedID; update_option($clickedID, $uploaded_file['url'] ); if(!empty($uploaded_file['error'])) {echo 'Upload Error: ' . $uploaded_file['error']; } else { echo $uploaded_file['url']; } } die(); } function post_thumbnail($a){ global $post; $post_img = ''; ob_start(); ob_end_clean(); $output = preg_match_all('/\<img.+?src="(.+?)".*?\/>/is',$post->post_content,$matches ,PREG_SET_ORDER); $cnt = count( $matches ); if($a==1){ if($cnt>0){ if($cnt>1){ if($cnt>3) $cnt=3; for($i=0;$i<$cnt;$i++){ $post_current = $i+1; $post_img_src = $matches[$i][1]; if($i==0){$post_spans .= '<span class="current">'.$post_current.'</span>';}else{ $post_spans .= '<span>'.$post_current.'</span>'; } $post_imgs .='<img src="'.get_bloginfo('template_url').'/timthumb.php?src='.$post_img_src.'&amp;w=285&amp;zc=1" />'; } $post_img = $post_imgs.'<span class="imgNav">'.$post_spans.'</span>'; }else{ $post_img_src = $matches [0][1]; $post_img = '<img src="'.get_bloginfo('template_url').'/timthumb.php?src='.$post_img_src.'&amp;w=285&amp;zc=1" />'; } echo $post_img; } }else{ return $cnt; } } function post_content_thumbnail($c) { if(is_single()){ $c = preg_replace('/\width="*".+?height="*"/i', '', $c); $s = array('/src="(.+?.(jpg|bmp|png|jepg|gif))".+?/i' => 'src="'.get_bloginfo("template_url").'/timthumb.php?src=$1&amp;h=440&amp;zc=1"'); foreach($s as $p => $r){ $c = preg_replace($p,$r,$c); } return $c; } } add_filter( 'the_content', 'post_content_thumbnail' ); function ajax_post(){ if( isset($_GET['action'])&& $_GET['action'] == 'ajax_post'){ if(isset($_GET['cat'])){ $args = array( 'category_name' => $_GET['cat'], 'paged' => $_GET['pag'] ); }else if(isset($_GET['pag'])){ $args = array( 'paged' => $_GET['pag'] ); } query_posts($args); if(have_posts()){while (have_posts()):the_post();?> <?php get_template_part( 'content', get_post_format() ); ?> <?php endwhile;} die(); }else{return;} } add_action('init', 'ajax_post'); function pagenavi( $p = 2 ) { if ( is_singular() ) return; global $wp_query,$paged; $max_page = $wp_query->max_num_pages; if ( $max_page == 1 ){ echo '<span id="post-current">1</span> / <span id="post-count">1</span>'; return; } if ( empty( $paged ) ) $paged = 1; if ( $paged >1 ) echo "<a id='prev' title='Prev' href='",esc_html( get_pagenum_link( $paged -1 ) ),"'>&lt;&lt;</a> "; echo '<span id="post-current">'.$paged .'</span> / <span id="post-count">'.$max_page .'</span>'; if ( $paged <$max_page ) echo "<a id='next' title='Next' href='",esc_html( get_pagenum_link( $paged +1) ),"'>&gt;&gt;</a> "; } function iphoto_comment($comment,$args,$depth) { $GLOBALS['comment'] = $comment; ;echo ' <li ';comment_class();;echo ' id="li-comment-';comment_ID() ;echo '" > <div id="comment-';comment_ID();;echo '" class="comment-body"> <div class="commentmeta">';echo get_avatar( $comment->comment_author_email,$size = '48');;echo '</div> ';if ($comment->comment_approved == '0') : ;echo ' <em>';_e('Your comment is awaiting moderation.') ;echo '</em><br /> ';endif;;echo ' <div class="commentmetadata">&nbsp;-&nbsp;';printf(__('%1$s %2$s'),get_comment_date('Y.n.d'),get_comment_time('G:i'));;echo '</div> <div class="reply">';comment_reply_link(array_merge( $args,array('depth'=>$depth,'max_depth'=>$args['max_depth'],'reply_text'=>__('Reply')))) ;echo '</div> <div class="vcard">';printf(__('%s'),get_comment_author_link()) ;echo '</div> ';comment_text() ;echo ' </div> '; } add_action('admin_init', 'iphoto_init'); function iphoto_init() { if (isset($_GET['page']) && $_GET['page'] == 'functions.php') { $dir = get_bloginfo('template_directory'); wp_enqueue_script('adminjquery', $dir . '/includes/admin.js', false, '1.0.0', false); wp_enqueue_style('admincss', $dir . '/includes/admin.css', false, '1.0.0', 'screen'); } } add_action('admin_menu','iphoto_page'); function iphoto_page (){ if ( count($_POST) >0 &&isset($_POST['iphoto_settings']) ){ $options = array ('keywords','description','analytics','lib','views','noajax','animate','phzoom','copyright'); foreach ( $options as $opt ){ delete_option ( 'iphoto_'.$opt,$_POST[$opt] ); add_option ( 'iphoto_'.$opt,$_POST[$opt] ); } } add_theme_page('iPhoto '.__('Theme Options',THEME_NAME),__('Theme Options',THEME_NAME),'edit_themes',basename(__FILE__),'iphoto_settings'); } function iphoto_settings(){?> <div class="wrap"> <div> <h2><?php _e( 'iPhoto Theme Options<span>Version: ',THEME_NAME);?><?php $theme_data=get_theme_data(TEMPLATEPATH . '/style.css'); echo $theme_data['Version'];?></span></h2> </div> <div class="clear"></div> <form method="post" action=""> <div id="theme-Option"> <div id="theme-menu"> <span class="m1"><?php _e( 'jQuery Effect',THEME_NAME);?></span> <span class="m2"><?php _e( 'Relative Plugins',THEME_NAME);?></span> <span class="m3"><?php _e( 'Website Information',THEME_NAME);?></span> <span class="m4"><?php _e( 'Analytics Code',THEME_NAME);?></span> <span class="m5"><?php _e( 'Footer Copyright',THEME_NAME);?></span> <span class="m6"><?php _e( 'iPhoto Theme Declare',THEME_NAME);?></span> <div class="clear"></div> </div> <div id="theme-content"> <ul> <li> <tr><td> <em><?php _e( 'iPhoto use jquery 1.4.4 which contained in this theme, you can also use the Google one instead.',THEME_NAME);?></em><br/> <label><input name="lib" type="checkbox" id="lib" value="1" <?php if (get_option('iphoto_lib')!='') echo 'checked="checked"' ;?>/><?php _e( 'Load the jQuery Library supported by Google',THEME_NAME);?></label><br/><br/> </td></tr> <tr><td> <em><?php _e( 'Index page infinite loading posts.',THEME_NAME);?></em><br/> <label><input name="noajax" type="checkbox" id="noajax" value="1" <?php if (get_option('iphoto_noajax')!='') echo 'checked="checked"' ;?>/><?php _e( 'Deactivate the Infinite loading posts',THEME_NAME);?></label><br/><br/> </td></tr> <tr><td> <em><?php _e( '<strong>Animation of relayout elements</strong>',THEME_NAME);?></em><br /> <input name="animate" type="checkbox" id="animate" value="1" <?php if (get_option('iphoto_animate')!='') echo 'checked="checked"';?>/><?php _e( 'Deactivate animation effect on index page',THEME_NAME);?> </td></tr> </li> <li> <tr><td> <em><?php _e( 'WP-PostViews, Enables you to display how many times a post/page had been viewed.',THEME_NAME);?></em><br/> <label><input name="views" type="checkbox" id="views" value="1" <?php if (get_option('iphoto_views')!='') echo 'checked="checked"' ?>/><?php _e( 'Activate WP-PostViews',THEME_NAME);?></label><br/><br/> </td></tr> </li> <li> <tr><td> <?php _e( '<em>Keywords, separate by English commas. like MuFeng, Computer, Software</em>',THEME_NAME);?><br/> <textarea name="keywords" id="keywords" rows="1" cols="70" style="font-size:11px;width:100%;"><?php echo get_option('iphoto_keywords');?></textarea><br/> </td></tr> <tr><td> <?php _e( '<em>Description, explain what\'s this site about. like MuFeng, Breathing the wind</em>',THEME_NAME);?><br/> <textarea name="description" id="description" rows="3" cols="70" style="font-size:11px;width:100%;"><?php echo get_option('iphoto_description');?></textarea> </td></tr> </li> <li> <tr><td> <?php _e( 'You can get your Google Analytics code <a target="_blank" href="https://www.google.com/analytics/settings/check_status_profile_handler">here</a>.',THEME_NAME);?></label><br> <textarea name="analytics" id="analytics" rows="5" cols="70" style="font-size:11px;width:100%;"><?php echo stripslashes(get_option('iphoto_analytics'));?></textarea> </td></tr> </li> <li> <tr><td> <textarea name="copyright" id="copyright" rows="5" cols="70" style="font-size:11px;width:100%;"><?php if(stripslashes(get_option('iphoto_copyright'))!=''){echo stripslashes(get_option('iphoto_copyright'));}else{echo 'Copyright &copy; '.date('Y').' '.'<a href="'.home_url( '/').'" title="'.esc_attr( get_bloginfo( 'name') ).'">'.esc_attr( get_bloginfo( 'name') ).'</a> All rights reserved'; };?></textarea> <br/><em><?php _e( '<b>Preview</b>',THEME_NAME);?><span> : </span><span><?php if(stripslashes(get_option('iphoto_copyright'))!=''){echo stripslashes(get_option('iphoto_copyright'));}else{echo 'Copyright &copy; '.date('Y').' '.'<a href="'.home_url( '/').'" title="'.esc_attr( get_bloginfo( 'name') ).'">'.esc_attr( get_bloginfo( 'name') ).'</a> All rights reserved'; };?></span></em> </td></tr> </li> <li> <tr><td> <p><?php _e('iPhoto is created, developed and maintained by <a href="http://mufeng.me/">MuFeng</a>. If you like iPhoto, please donate. It will help in developing new features and versions.',THEME_NAME);?><?php _e('Alipay',THEME_NAME);?>:</strong> <a href="http://www.alipay.com" target="_blank" title="Alipay">[email protected]</a></p> <h3 style="color:#333" id="introduce"><?php _e( 'Introduction',THEME_NAME);?></h3> <p style="text-indent: 2em;margin:10px 0;"><?php _e( 'iPhoto is evolved from one theme of Tumblr and turned it into a photo theme which can be used at wordpress.',THEME_NAME);?></p> <h3 style="color:#333"><?php _e( 'Published Address',THEME_NAME);?></h3> <p id="release" style="text-indent: 2em;margin:10px 0;"><a href="http://mufeng.me/wordpress-theme-iphoto.html" target="_blank">http://mufeng.me/wordpress-theme-iphoto.html</a></p> <h3 style="color:#333"><?php _e( 'Preview Address',THEME_NAME);?></h3> <p id="preview" style="text-indent: 2em;margin:10px 0;"><a href="http://mufeng.me/photo/" target="_blank">http://mufeng.me/photo/</a></p> <h3 style="color:#333" id="bug"><?php _e( 'Report Bugs',THEME_NAME);?></h3> <p style="text-indent: 2em;margin:10px 0;"><?php _e( 'Weibo <a href="http://weibo.com/meapo" target="_blank">@mufeng.me</a> or leave a message at <a href="http://mufeng.me" target="_blank">http://mufeng.me</a>?',THEME_NAME);?></p> </td></tr> </li> </ul> </div> </div> <p class="submit"> <input type="submit" name="Submit" class="button-primary" value="<?php _e( 'Save Options',THEME_NAME);?>" /> <input type="hidden" name="iphoto_settings" value="save" style="display:none;" /> </p> </form> </div> <?php } ?>

    Read the article

  • SQL SERVER – SHRINKFILE and TRUNCATE Log File in SQL Server 2008

    - by pinaldave
    Note: Please read the complete post before taking any actions. This blog post would discuss SHRINKFILE and TRUNCATE Log File. The script mentioned in the email received from reader contains the following questionable code: “Hi Pinal, If you could remember, I and my manager met you at TechEd in Bangalore. We just upgraded to SQL Server 2008. One of our jobs failed as it was using the following code. The error was: Msg 155, Level 15, State 1, Line 1 ‘TRUNCATE_ONLY’ is not a recognized BACKUP option. The code was: DBCC SHRINKFILE(TestDBLog, 1) BACKUP LOG TestDB WITH TRUNCATE_ONLY DBCC SHRINKFILE(TestDBLog, 1) GO I have modified that code to subsequent code and it works fine. But, are there other suggestions you have at the moment? USE [master] GO ALTER DATABASE [TestDb] SET RECOVERY SIMPLE WITH NO_WAIT DBCC SHRINKFILE(TestDbLog, 1) ALTER DATABASE [TestDb] SET RECOVERY FULL WITH NO_WAIT GO Configuration of our server and system is as follows: [Removed not relevant data]“ An email like this that suddenly pops out in early morning is alarming email. Because I am a dead, busy mind, so I had only one min to reply. I wrote down quickly the following note. (As I said, it was a single-minute email so it is not completely accurate). Here is that quick email shared with all of you. “Hi Mr. DBA [removed the name] Thanks for your email. I suggest you stop this practice. There are many issues included here, but I would list two major issues: 1) From the setting database to simple recovery, shrinking the file and once again setting in full recovery, you are in fact losing your valuable log data and will be not able to restore point in time. Not only that, you will also not able to use subsequent log files. 2) Shrinking file or database adds fragmentation. There are a lot of things you can do. First, start taking proper log backup using following command instead of truncating them and losing them frequently. BACKUP LOG [TestDb] TO  DISK = N'C:\Backup\TestDb.bak' GO Remove the code of SHRINKING the file. If you are taking proper log backups, your log file usually (again usually, special cases are excluded) do not grow very big. There are so many things to add here, but you can call me on my [phone number]. Before you call me, I suggest for accuracy you read Paul Randel‘s two posts here and here and Brent Ozar‘s Post here. Kind Regards, Pinal Dave” I guess this post is very much clear to you. Please leave your comments here. As mentioned, this is a very huge subject; I have just touched a tip of the ice-berg and have tried to point to authentic knowledge. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Backup and Restore, SQL Data Storage, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • April 30th Links: ASP.NET, ASP.NET MVC, Visual Studio 2010

    - by ScottGu
    Here is the latest in my link-listing series. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] ASP.NET Data Web Control Enhancements in ASP.NET 4.0: Scott Mitchell has a good article that summarizes some of the nice improvements coming to the ASP.NET 4 data controls. Refreshing an ASP.NET AJAX UpdatePanel with JavaScript: Scott Mitchell has another nice article in his series on using ASP.NET AJAX that demonstrates how to programmatically trigger an UpdatePanel refresh using JavaScript on the client. ASP.NET MVC ASP.NET MVC 2: Basics and Introduction: Scott Hanselman delivers an awesome introductory talk on ASP.NET MVC.  Great for people looking to understand and learn ASP.NET MVC. ASP.NET MVC 2: Ninja Black Belt Tips: Another great talk by Scott Hanselman about how to make the most of several features of ASP.NET MVC 2. ASP.NET MVC 2 Html.Editor/Display Templates: A great blog post detailing the new Html.EditorFor() and Html.DisplayFor() helpers within ASP.NET MVC 2. MVCContrib Grid: Jeremy Skinner’s video presentation about the new Html.Grid() helper component within the (most awesome) MvcContrib project for ASP.NET MVC. Code Snippets for ASP.NET MVC 2 in VS 2010: Raj Kaimal documents some of the new code snippets for ASP.NET MVC 2 that are now built-into Visual Studio 2010.  Read this article to learn how to do common scenarios with fewer keystrokes. Turn on Compile-time View Checking for ASP.NET MVC Projects in TFS 2010 Build: Jim Lamb has a nice post that describes how to enable compile-time view checking as part of automated builds done with a TFS Build Server.  This will ensure any errors in your view templates raise build-errors (allowing you to catch them at build-time instead of runtime). Visual Studio 2010 VS 2010 Keyboard Shortcut Posters for VB, C#, F# and C++: Keyboard shortcut posters that you can download and then printout. Ideal to provide a quick reference on your desk for common keystroke actions inside VS 2010. My Favorite New Features in VS 2010: Scott Mitchell has a nice article that summarizes some of his favorite new features in VS 2010.  Check out my VS 2010 and .NET 4 blog series for more details on some of them. 6 Cool VS 2010 Quick Tips and Features: Anoop has a nice blog post describing 6 cool features of VS 2010 that you can take advantage of. SharePoint Development with VS 2010: Beth Massi links to a bunch of nice “How do I?” videos that that demonstrate how to use the SharePoint development support built-into VS 2010. How to Pin a Project to the Recent Projects List in VS 2010: A useful tip/trick that demonstrates how to “pin” a project to always show up on the “Recent Projects” list within Visual Studio 2010. Using the WPF Tree Visualizer in VS 2010: Zain blogs about the new WPF Tree Visualizer supported by the VS 2010 debugger.  This makes it easier to visualize WPF control hierarchies within the debugger. TFS 2010 Power Tools Released: Brian Harry blogs about the cool new TFS 2010 extensions released with this week’s TFS 2010 Power Tools release. What is New with T4 in VS 2010: T4 is the name of Visual Studio’s template-based code generation technology.  Lots of scenarios within VS 2010 now use T4 for code generation customization. Two examples are ASP.NET MVC Views and EF4 Model Generation.  This post describes some of the many T4 infrastructure improvements in VS 2010. Hope this helps, Scott P.S. If you haven’t already, check out this month’s "Find a Hoster” page on the www.asp.net website to learn about great (and very inexpensive) ASP.NET hosting offers.

    Read the article

  • Programação paralela no .NET Framework 4 – Parte II

    - by anobre
    Olá pessoal, tudo bem? Este post é uma continuação da série iniciada neste outro post, sobre programação paralela. Meu objetivo hoje é apresentar o PLINQ, algo que poderá ser utilizado imediatamente nos projetos de vocês. Parallel LINQ (PLINQ) PLINQ nada mais é que uma implementação de programação paralela ao nosso famoso LINQ, através de métodos de extensão. O LINQ foi lançado com a versão 3.0 na plataforma .NET, apresentando uma maneira muito mais fácil e segura de manipular coleções IEnumerable ou IEnumerable<T>. O que veremos hoje é a “alteração” do LINQ to Objects, que é direcionado a coleções de objetos em memória. A principal diferença entre o LINQ to Objects “normal” e o paralelo é que na segunda opção o processamento é realizado tentando utilizar todos os recursos disponíveis para tal, obtendo uma melhora significante de performance. CUIDADO: Nem todas as operações ficam mais rápidas utilizando recursos de paralelismo. Não deixe de ler a seção “Performance” abaixo. ParallelEnumerable Tudo que a gente precisa para este post está organizado na classe ParallelEnumerable. Esta classe contém os métodos que iremos utilizar neste post, e muito mais: AsParallel AsSequential AsOrdered AsUnordered WithCancellation WithDegreeOfParallelism WithMergeOptions WithExecutionMode ForAll … O exemplo mais básico de como executar um código PLINQ é utilizando o métodos AsParallel, como o exemplo: var source = Enumerable.Range(1, 10000); var evenNums = from num in source.AsParallel() where Compute(num) > 0 select num; Algo tão interessante quanto esta facilidade é que o PLINQ não executa sempre de forma paralela. Dependendo da situação e da análise de alguns itens no cenário de execução, talvez seja mais adequado executar o código de forma sequencial – e nativamente o próprio PLINQ faz esta escolha.  É possível forçar a execução para sempre utilizar o paralelismo, caso seja necessário. Utilize o método WithExecutionMode no seu código PLINQ. Um teste muito simples onde podemos visualizar a diferença é demonstrado abaixo: static void Main(string[] args) { IEnumerable<int> numbers = Enumerable.Range(1, 1000); IEnumerable<int> results = from n in numbers.AsParallel() where IsDivisibleByFive(n) select n; Stopwatch sw = Stopwatch.StartNew(); IList<int> resultsList = results.ToList(); Console.WriteLine("{0} itens", resultsList.Count()); sw.Stop(); Console.WriteLine("Tempo de execução: {0} ms", sw.ElapsedMilliseconds); Console.WriteLine("Fim..."); Console.ReadKey(true); } static bool IsDivisibleByFive(int i) { Thread.SpinWait(2000000); return i % 5 == 0; }   Basta remover o AsParallel da instrução LINQ que você terá uma noção prática da diferença de performance. 1. Instrução utilizando AsParallel   2. Instrução sem utilizar paralelismo Performance Apesar de todos os benefícios, não podemos utilizar PLINQ sem conhecer todos os seus detalhes. Lembre-se de fazer as perguntas básicas: Eu tenho trabalho suficiente que justifique utilizar paralelismo? Mesmo com o overhead do PLINQ, vamos ter algum benefício? Por este motivo, visite este link e conheça todos os aspectos, antes de utilizar os recursos disponíveis. Conclusão Utilizar recursos de paralelismo é ótimo, aumenta a performance, utiliza o investimento realizado em hardware – tudo isso sem custo de produtividade. Porém, não podemos usufruir de qualquer tipo de tecnologia sem conhece-la a fundo antes. Portanto, faça bom uso, mas não esqueça de manter o conhecimento a frente da empolgação. Abraços.

    Read the article

  • ASP.NET JavaScript Routing for ASP.NET MVC–Constraints

    - by zowens
    If you haven’t had a look at my previous post about ASP.NET routing, go ahead and check it out before you read this post: http://weblogs.asp.net/zowens/archive/2010/12/20/asp-net-mvc-javascript-routing.aspx And the code is here: https://github.com/zowens/ASP.NET-MVC-JavaScript-Routing   Anyways, this post is about routing constraints. A routing constraint is essentially a way for the routing engine to filter out route patterns based on the day from the URL. For example, if I have a route where all the parameters are required, I could use a constraint on the required parameters to say that the parameter is non-empty. Here’s what the constraint would look like: Notice that this is a class that inherits from IRouteConstraint, which is an interface provided by System.Web.Routing. The match method returns true if the value is a match (and can be further processed by the routing rules) or false if it does not match (and the route will be matched further along the route collection). Because routing constraints are so essential to the route matching process, it was important that they be part of my JavaScript routing engine. But the problem is that we need to somehow represent the constraint in JavaScript. I made a design decision early on that you MUST put this constraint into JavaScript to match a route. I didn’t want to have server interaction for the URL generation, like I’ve seen in so many applications. While this is easy to maintain, it causes maintenance issues in my opinion. So the way constraints work in JavaScript is that the constraint as an object type definition is set on the route manager. When a route is created, a new instance of the constraint is created with the specific parameter. In its current form the constraint function MUST return a function that takes the route data and will return true or false. You will see the NotEmpty constraint in a bit. Another piece to the puzzle is that you can have the JavaScript exist as a string in your application that is pulled in when the routing JavaScript code is generated. There is a simple interface, IJavaScriptAddition, that I have added that will be used to output custom JavaScript. Let’s put it all together. Here is the NotEmpty constraint. There’s a few things at work here. The constraint is called “notEmpty” in JavaScript. When you add the constraint to a parameter in your C# code, the route manager generator will look for the JsConstraint attribute to look for the name of the constraint type name and fallback to the class name. For example, if I didn’t apply the “JsConstraint” attribute, the constraint would be called “NotEmpty”. The JavaScript code essentially adds a function to the “constraintTypeDefs” object on the “notEmpty” property (this is how constraints are added to routes). The function returns another function that will be invoked with routing data. Here’s how you would use the NotEmpty constraint in C# and it will work with the JavaScript routing generator. The only catch to using route constraints currently is that the following is not supported: The constraint will work in C# but is not supported by my JavaScript routing engine. (I take pull requests so if you’d like this… go ahead and implement it).   I just wanted to take this post to explain a little bit about the background on constraints. I am looking at expanding the current functionality, but for now this is a good start. Thanks for all the support with the JavaScript router. Keep the feedback coming!

    Read the article

  • MSMQ messages using HTTP just won't get delivered

    - by John Breakwell
    I'm starting off the blog with a discussion of an unusual problem that has hit a couple of my customers this month. It's not a problem you'd expect to bump into and the solution is potentially painful. Scenario You want to make use of the HTTP protocol to send MSMQ messages from one machine to another. You have installed HTTP support for MSMQ and have addressed your messages correctly but they will not leave the outgoing queue. There is no configuration for HTTP support - setup has already done all that for you (although you may want to check the most recent "Installation of the MSMQ HTTP Support Subcomponent" section of MSMQINST.LOG to see if anything DID go wrong) - so you can't tweak anything. Restarting services and servers makes no difference - the messages just will not get delivered. The problem is documented and resolved by Knowledgebase article 916699 "The message may not be delivered when you use the HTTP protocol to send a message to a server that is running Message Queuing 3.0". It is unlikely that you would be able to resolve the problem without the assistance of PSS because there are no messages that can be seen to assist you and only access to the source code exposes the root cause. As this communication is over HTTP, the IIS logs would be a good place to start. POST entries are logged which show that connectivity is working and message delivery is being attempted: #Software: Microsoft Internet Information Services 6.0 #Version: 1.0 #Date: 2006-09-12 12:11:29 #Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status 2006-09-12 12:12:12 W3SVC1 10.1.17.219 POST /msmq/private$/test - 80 - 10.2.200.3 - 200 0 0 If you capture the traffic with Network Monitor you can see the POST being sent to the server but you also see a response being returned to the client: HTTP: Response to Client; HTTP/1.1; Status Code = 500 - Internal Server Error "Internal Server Error" means we can probably stop looking at IIS and instead focus on the Message Queuing ISAPI extension (Mqise.dll). MSMQ 3.0 (Windows XP and Windows Server 2003) comes with error logging enabled by default but the log files are in binary format - MSMQ 2.0 generated logging in plain text. The symbolic information needed for formatting the files is not currently publicly available so log files have to be sent in to Microsoft PSS.  Although this does mean raising a support case, formatting the log files to text and returning them to the customer shouldn't take long. Obviously the engineer analyses them for you - I just want to point out that you can see the logging output in text format if you want it. The important entries in the log for this problem are: [7]b48.928 09/12/2006-13:20:44.552 [mqise GetNetBiosNameFromIPAddr] ERROR:Failed to get the NetBios name from the DNS name, error = 0xea [7]b48.928 09/12/2006-13:20:44.552 [mqise RPCToServer] ERROR:RPC call R_ProcessHTTPRequest failed, error code = 1702(RPC_S_INVALID_BINDING) which allow a Microsoft escalation engineer to check the MQISE source code to see what is going wrong. This problem according to the article occurs when the extension tries to bind to the local MSMQ service after the extension receives a POST request that contains an MSMQ message. MSMQ resolves the server name by using the DNS host name but the extension cannot bind to the service because the buffer that MSMQ uses to resolve the server name is too small - server names that are exactly 15 characters long will not fit. RPC exception 0x6a6 (RPC_S_INVALID_BINDING) occurs in the W3wp.exe process but the exception is handled and so you do not receive an error message. The workaround is to rename the MSMQ server to something less than 15 characters. If the problem has only just been noticed in a production environment - an application may have been modified to get through a newly-implemented firewall, for example - then renaming is going to be an issue. Other applications may need to be reinstalled or modified if server names are hard-coded or stored in the registry. The renaming may also break a company naming convention where the name is built up from something like location+department+number. If you want to learn more about MSMQ logging then check out Chapter 15 of the MSMQ FAQ. In fact, even if you DON'T want to learn anything about MSMQ logging you should read the FAQ anyway as there is a huge amount of useful information on known issues and the like.

    Read the article

  • GPGPU

    WhatGPU obviously stands for Graphics Processing Unit (the silicon powering the display you are using to read this blog post). The extra GP in front of that stands for General Purpose computing.So, altogether GPGPU refers to computing we can perform on GPU for purposes beyond just drawing on the screen. In effect, we can use a GPGPU a bit like we already use a CPU: to perform some calculation (that doesn’t have to have any visual element to it). The attraction is that a GPGPU can be orders of magnitude faster than a CPU.WhyWhen I was at the SuperComputing conference in Portland last November, GPGPUs were all the rage. A quick online search reveals many articles introducing the GPGPU topic. I'll just share 3 here: pcper (ignoring all pages except the first, it is a good consumer perspective), gizmodo (nice take using mostly layman terms) and vizworld (answering the question on "what's the big deal").The GPGPU programming paradigm (from a high level) is simple: in your CPU program you define functions (aka kernels) that take some input, can perform the costly operation and return the output. The kernels are the things that execute on the GPGPU leveraging its power (and hence execute faster than what they could on the CPU) while the host CPU program waits for the results or asynchronously performs other tasks.However, GPGPUs have different characteristics to CPUs which means they are suitable only for certain classes of problem (i.e. data parallel algorithms) and not for others (e.g. algorithms with branching or recursion or other complex flow control). You also pay a high cost for transferring the input data from the CPU to the GPU (and vice versa the results back to the CPU), so the computation itself has to be long enough to justify the overhead transfer costs. If your problem space fits the criteria then you probably want to check out this technology.HowSo where can you get a graphics card to start playing with all this? At the time of writing, the two main vendors ATI (owned by AMD) and NVIDIA are the obvious players in this industry. You can read about GPGPU on this AMD page and also on this NVIDIA page. NVIDIA's website also has a free chapter on the topic from the "GPU Gems" book: A Toolkit for Computation on GPUs.If you followed the links above, then you've already come across some of the choices of programming models that are available today. Essentially, AMD is offering their ATI Stream technology accessible via a language they call Brook+; NVIDIA offers their CUDA platform which is accessible from CUDA C. Choosing either of those locks you into the GPU vendor and hence your code cannot run on systems with cards from the other vendor (e.g. imagine if your CPU code would run on Intel chips but not AMD chips). Having said that, both vendors plan to support a new emerging standard called OpenCL, which theoretically means your kernels can execute on any GPU that supports it. To learn more about all of these there is a website: gpgpu.org. The caveat about that site is that (currently) it completely ignores the Microsoft approach, which I touch on next.On Windows, there is already a cross-GPU-vendor way of programming GPUs and that is the DirectX API. Specifically, on Windows Vista and Windows 7, the DirectX 11 API offers a dedicated subset of the API for GPGPU programming: DirectCompute. You use this API on the CPU side, to set up and execute the kernels that run on the GPU. The kernels are written in a language called HLSL (High Level Shader Language). You can use DirectCompute with HLSL to write a "compute shader", which is the term DirectX uses for what I've been referring to in this post as a "kernel". For a comprehensive collection of links about this (including tutorials, videos and samples) please see my blog post: DirectCompute.Note that there are many efforts to build even higher level languages on top of DirectX that aim to expose GPGPU programming to a wider audience by making it as easy as today's mainstream programming models. I'll mention here just two of those efforts: Accelerator from MSR and Brahma by Ananth. Comments about this post welcome at the original blog.

    Read the article

  • Silverlight Cream for January 30, 2011 -- #1037

    - by Dave Campbell
    In this Issue: Ollie Riches, Colin Eberhardt, Andrej Tozon, Arik Poznanski, Deborah Kurata(-2-), Jay Kimble, Yochay Kiriaty, Peter Kuhn, Mike Ormond, WindowsPhoneGeek(-2-), and Matthias Shapiro. Above the Fold: Silverlight: "Missing Chart Legend" Deborah Kurata WP7: "XNA for Silverlight developers: Part 2 - Text rendering" Peter Kuhn Shoutouts: Timmy Kokke has a post up discussing What’s new in the Expression Design January 2011 preview? From SilverlightCream.com: WP7Contrib: Thread safe ObservableCollection<T> Ollie Riches, one of the two originators of WP7Contrib, has a post up on the WP7C ObservableCollection... what and why. Windows Phone 7 DeferredLoadContentControl Colin Eberhardt's latest is one we should all take notice of... a content control that defers rendering to provide a better user experience... source code is available as are some good external links Andrej Tozon on Hey weigh! WP7 application SilverlightShow interviews WP7 Dev Andrej Tozon and gets his take on his app, challenges, tips, and the future of WP7. A ProgressBar With Text For Windows Phone 7 Arik Poznanski demonstrates putting text up on the progress bar to let your users know what you're up to... and it looks great in the screenshots. Charting in a Silverlight Application using MVVM Deborah Kurata is checking out the Charting control this time around... using the charting control from the toolbox in the MVVM app she built in the last post... C# and VB code as always. Missing Chart Legend Deborah Kurata's latest in the world of Charting and MVVM involves using a custom theme and having your chart legend disappear... never fear, she's gonna tell you how to fix that! Silverlight/WP7 tip: Detecting when in VS Design Mode Jay Kimble has a post up that not only resolves a question you may need answered during development (are you in VS design Mode), but it also helps resolve a class of problem that Jay explains. Windows Phone GPS Emulator Yochay Kiriaty points out that while part of the issues of building a GPS-driven app for WP7 is getting your head around the tools, the next hurdle is testing... and that's what he's really discussing... "Windows Phone GPS Emulator" ... if you're playing with the GPS, you'll want this. XNA for Silverlight developers: Part 2 - Text rendering Peter Kuhn's latest tutorial in his XNA series for Silverlight developers is up at SilverlightShow... in this tutorial, Peter discusses text... it's a vastly different game displaying text in XNA as compared to Silverlight ... check it out and see. OData and Windows Phone 7 Mike Ormond starts you off using OData on your WP7 by showing where to download the libraries, and not stopping until he has an app running that reads an OData feed, plus he plans on continuing the quest in future posts. WP7 ProgressOverlay control in depth: features and customization WindowsPhoneGeek has a couple new posts up. The first one is an in-depth look at the ProgressOverlay control in the Codeing4fun Toolkit... pretty cool to be able to put your logo or app logo up. On Testing Windows Phone 7 Applications – Part II: Dealing with the WP7 Application Model WindowsPhoneGeek also has 5 more WP7 testing tips... and these are a little more technical than the first set, and includes some good external links. Topics include: Tombstoning, Usability, Navigation, Capabilities, and Memory consumption. Fun Theme-Friendly Windows Phone Icon Matthias Shapiro explains how to have your WP7 icon change based on the theme your user has chosen... great examples, and XAML included Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Creating PDF documents dynamically using Umbraco and XSL-FO part 2

    - by Vizioz Limited
    Since my last post I have made a few modifications to the PDF generation, the main one being that the files are now dynamically renamed so that they reflect the name of the case study instead of all being called PDF.PDF which was not a very helpful filename, I just wanted to get something live last week, so decided that something was better than nothing :)The issue with the filenames comes down to the way that the PDF's are being generated by using an alternative template in Umbraco, this means that all you need to do is add " /pdf " to the end of a case study URL and it will create a PDF version of the case study. The down side is that your browser will merrily download the file and save it as PDF.PDF because that is the name of the last part of the URL.What you need to do is set the content-disposition header to be equal to the name you would like the file use, Darren Ferguson mentioned this on the Change the name of the PDF forum post.We have used the same technique for downloading dynamically generated excel files, so I thought it would be useful to create a small macro to set both this header and also to set the caching headers to prevent any caching issues, I think in the past we have experienced all possible issues, including various issues where IE behaves differently to other browsers when you are using SSL and so the below code should work in all situations!The template for the PDF alternative template is very simple:<%@ Master Language="C#" MasterPageFile="~/umbraco/masterpages/default.master" AutoEventWireup="true" %><asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolderDefault" runat="server"> <umbraco:Macro Alias="PDFHeaders" runat="server"></umbraco:Macro> <umbraco:Macro xsl="FO-CaseStudy.xslt" Alias="PDFXSLFO" runat="server"></umbraco:Macro></asp:Content>The following code snippet is the XSLT macro that simply creates our file name and then passes the file name into the helper function:<xsl:template match="/"> <xsl:variable name="fileName"> <xsl:text>Vizioz_</xsl:text> <xsl:value-of select="$currentPage/@nodeName" /> <xsl:text>_case_study.pdf</xsl:text> </xsl:variable> <xsl:value-of select="Vizioz.Helper:AddDocumentDownloadHeaders('application/pdf', $fileName)"/> </xsl:template>And the following code is the helper function that clears the current response and adds all the appropriate headers:public static void AddDocumentDownloadHeaders(string contentType, string fileName){ HttpResponse response = HttpContext.Current.Response; HttpRequest request = HttpContext.Current.Request; response.Clear(); response.ClearHeaders(); if (request.IsSecureConnection & request.Browser.Browser == "IE") { // Don't use the caching headers if the browser is IE and it's a secure connection // see: http://support.microsoft.com/kb/323308 } else { // force not using the cache response.AppendHeader("Cache-Control", "no-cache"); response.AppendHeader("Cache-Control", "private"); response.AppendHeader("Cache-Control", "no-store"); response.AppendHeader("Cache-Control", "must-revalidate"); response.AppendHeader("Cache-Control", "max-stale=0"); response.AppendHeader("Cache-Control", "post-check=0"); response.AppendHeader("Cache-Control", "pre-check=0"); response.AppendHeader("Pragma", "no-cache"); response.Cache.SetCacheability(HttpCacheability.NoCache); response.Cache.SetNoStore(); response.Cache.SetExpires(DateTime.UtcNow.AddMinutes(-1)); } response.AppendHeader("Expires", DateTime.Now.AddMinutes(-1).ToLongDateString()); response.AppendHeader("Keep-Alive", "timeout=3, max=993"); response.AddHeader("content-disposition", "attachment; filename=\"" + fileName + "\""); response.ContentType = contentType;}I will write another blog soon with some more details about XSL-FO and how to create the PDF's dynamically.Please do re-tweet if you find this interest :)

    Read the article

  • Silverlight Cream for March 26, 2010 -- #821

    - by Dave Campbell
    In this Issue: Max Paulousky, Christian Schormann, John Papa, Phani Raj, David Anson(-2-, -3-), Brad Abrams(-2-), and Jeff Wilcox(-2-, -3-). Shoutouts: Jeff Wilcox posted his material from mix and some preview TestFramework bits: Unit Testing Silverlight & Windows Phone Applications – talk now online At MIX10, Jeff Wilcox demo'd an app called "Peppermint"... here's the bleeding edge demo: “Peppermint” MIX demo sources Erik Mork and Co. have put out their weekly This Week In Silverlight 3.25.2010 Brad Abrams has all his materials posted for his MIX10 session Mix2010: Search Engine Optimization (SEO) for Microsoft Silverlight... including play-by-play of the demo and all source. Do you use Rooler? Well you should! Watch a video Pete Brown did with Pete Blois on Expression Blend, Windows Phone, Rooler Interested in Silverlight and XNA for WP7? Me too! Michael Klucher has a post outlining the two: Silverlight and XNA Framework Game Development and Compatibility From SilverlightCream.com: Modularity in Silverlight Applications - An Issue With ModuleInitializeException Max Paulousky has a truly ugly error trace listed by way of not having a reference listed, and the obvious simple solution. Next time he'll talk about the difficult situations. Using SketchFlow to Prototype for Windows Phone Christian Schormann has a tutorial up on using Expression Blend to develop for WP7 ... who better than Christian for that task?? Silverlight TV 18: WCF RIA Services Validation John Papa held forth with Nikhil Kothari on WCF RIA Services and validation just prior to MIX10, and was posted yesterday. Building SL3 applications using OData client Library with Vs 2010 RC Phani Raj walks through building an OData consumer in SL3, the first problem you're going to hit, and the easy solution to it. Tip: When creating a DependencyProperty, follow the handy convention of "wrapper+register+static+virtual" David Anson has a couple more of his 'Tips' up... this first is about Dependency Properties again... having a good foundation for all your Dependency Properties is a great way to avoid problems. Tip: Do not assign DependencyProperty values in a constructor; it prevents users from overriding them In the next post, David Anson talks about not assigning Dependency Property values in a constructor and gives one of the two ways to get around doing so. Tip: Set DependencyProperty default values in a class's default style if it's more convenient In his latest post, David Anson gives the second way to avoid setting a Dependency Property value in the constructor. Silverlight 4 + RIA Services - Ready for Business: Search Engine Optimization (SEO) Brad Abrams Abrams adds SEO to the tutorial series he's doing. He begins with his PDC09 session material on the subject and then takes off on a great detailed tutorial all with source. Silverlight 4 + RIA Services - Ready for Business: Localizing Business Application Brad Abrams then discusses localization and Silverlight in another detailed tutorial with all code included. Silverlight Toolkit and the Windows Phone: WrapPanel, and a few others Jeff Wilcox has a few WP7 posts I'm going to push today. This first is from earlier this week and is about using the Toolkit in WP7 and better than that, he includes the bits you need if all you want is the WrapPanel Data binding user settings in Windows Phone applications In the next one from yesterday, Jeff Wilcox demonstrates saving some user info in Isolated Storage to improve the user experience, and shares all the necessary plumbing files, and other external links as well. Displaying 2D QR barcodes in Windows Phone applications In a post from today, Jeff Wilcox ported his Silverlight 2D QR Barcode app from last year into WP7 ... just very cool... get the source and display your Microsoft Tag. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone    MIX10

    Read the article

  • Outlook 2010 – My Top 9 features

    - by Daniel Moth
    Office 2010 has reached RTM. Here are my favorite Outlook features. Speed. It is faster than previous versions and hangs much less… Ignore Conversation (Ctrl+Del). Not interested in a conversation? Click this button on the new ribbon and you'll never receive another message on that thread (they all go to your Deleted folder). Calendar Preview. When receiving a Meeting Request, before deciding to accept or not you get to see a preview of your calendar for that day and where the new meeting would fit in. See full description on outlook team blog post. Quick Steps. See full description on outlook team blog post. I have created my own quick steps for filing conversations to folders, various pre-populated reply templates, creating calendar invites and creating TODOs from received emails. Search Interface. Many of us knew the magic keywords for making smart searches (e.g. from:Name), but it is great to learn many more through the search tools contextual ribbon tab. Next 7 days. Out of the many enhancements to the Calendar view, my favorite is to be able with  single click to view the next 7 days – that is now my default view. MailTips. See full description on outlook team blog post. The ones I particularly like are when composing a mail to someone that has their Out Of Office reply set, you get to read it before sending the mail (and hence can decide to postpone sending). when composing a mail to a distribution list, a message informs you of the number of recipients. Hopefully, senders will use that as a clue for narrowing down the recipient list or at least verifying that their mail should indeed be sent to so many people. "You are not responding to the latest message in this conversation. Click here to open it.". When composing a reply to a conversation and you have not picked the last message to reply to (don't you hate it when people split threads like that?), this is the inline message you see (under the MailTips area) and if you click on the message it opens the last mail in the conversation so you can reply to that. Rich "Conversation Settings" and in particular "Show Messages from Other Folders". For example, you can see in your inbox not only the message you received but also the reply you sent (it gets pulled in from the Sent folder). Another example: a conversation has been taking place on a distribution list (so your rules filed it to a folder) and they add you on the TO or CC line, so it appears in a different folder; regardless of which folder you open, you are able to see the entire conversation. Note that messages from other folders than the one you are browsing, appear in grey text so you can easily spot them. Reading them in one folder, obviously marks them as read in the other folder… If you haven't yet, when are you making the move to Outlook 2010? Comments about this post welcome at the original blog.

    Read the article

  • SQL SERVER – What is SSRS and Why SSRS is asked for in many Job Opening?

    - by Pinal Dave
    This example is from the Beginning SSRS by Kathi Kellenberger. Supporting files are available with a free download from the www.Joes2Pros.com web site. This will be a 5 day blog post in getting started with SSRS. Today will show the importance of SSRS in the business. Why is SSRS asked for in so many job openings? If you talk to an SSRS expert it’s very clear to them exactly why companies really need this invention and how it saves time and adds business value. You don’t have to be an SSRS expert to know its value or to start using it. For example you don’t have to be an airline pilot to know the usefulness of modern transportation. Even the people who don’t know how to run SSRS but need the reports can tell you why that is needed. This blog post will go into why SSRS is an important invention by showing how it improves the usage of information in your company. Before SSRS there has always been a need for a company to benefit from the use of its own information. Excel spreadsheets have been a popular way to do this for a long time. With SSRS you can still use this solution and gain many other options too. A friend of mine told me a story about doing database work in the 90s for a major company and how he wished SSRS was available back then. The Vice President of the marketing channel would often come to him just before an important meeting with the board of directors. He often needed to show how certain product sales were performing over time. All this information was in the database so it was my friend’s job to get the information out and organized into a medium the VP could use. This medium was usually Excel. The VP often had meetings all over the world where he showcased this Excel report. The solution to get the VP to him anywhere he was in the world was an Excel file attached to an e-mail. This worked pretty well but with some drawbacks. One time my friend sent the wrong file in the e-mail. A few minutes later my friend realized his mistake and sent another frantic e-mail to VP. This one was saying to ignore the last e-mail and use this newer one. Would the VP see the correct e-mail in time? If SSRS had been available, my friend could have created a solution that let the VP run the report any time he wished. The report could have been published to the company intranet where the VP could run it from any of the offices he happened to be traveling to that month. There is a fair amount of work up front to develop and publish the report, but once that work is completed, the report can be reused as many times as needed. My friend could even be on vacation for the first day of the monthly and the VP can get his real-time report. Not only could the report show the most recent data, the VP could choose to view reports of previous months with just a few clicks. The deployed SSRS is user friendly, and can also be configured to protect reports from being run by the wrong people. Tomorrow’s Post Tomorrow’s blog post will show how to know if you already have SSRS installed. If you want to learn SSRS in easy to simple words – I strongly recommend you to get Beginning SSRS book from Joes 2 Pros. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: Reporting Services, SSRS

    Read the article

  • Calling Web Services in classic ASP

    - by cabhilash
      Last day my colleague asked me the provide her a solution to call the Web service from classic ASP. (Yes Classic ASP. still people are using this :D ) We can call web service SOAP toolkit also. But invoking the service using the XMLHTTP object was more easier & fast. To create the Service I used the normal Web Service in .Net 2.0 with [Webmethod] public class WebService1 : System.Web.Services.WebService { [WebMethod] public string HelloWorld(string name){return name + " Pay my dues :) "; // a reminder to pay my consultation fee :D} } In Web.config add the following entry in System.web<webServices><protocols><add name="HttpGet"/><add name="HttpPost"/></protocols></webServices> Alternatively, you can enable these protocols for all Web services on the computer by editing the <protocols> section in Machine.config. The following example enables HTTP GET, HTTP POST, and also SOAP and HTTP POST from localhost: <protocols> <add name="HttpSoap"/> <add name="HttpPost"/> <add name="HttpGet"/> <add name="HttpPostLocalhost"/> <!-- Documentation enables the documentation/test pages --> <add name="Documentation"/> </protocols> By adding these entries I am enabling the HTTPGET & HTTPPOST (After .Net 1.1 by default HTTPGET & HTTPPOST is disabled because of security concerns)The .NET Framework 1.1 defines a new protocol that is named HttpPostLocalhost. By default, this new protocol is enabled. This protocol permits invoking Web services that use HTTP POST requests from applications on the same computer. This is true provided the POST URL uses http://localhost, not http://hostname. This permits Web service developers to use the HTML-based test form to invoke the Web service from the same computer where the Web service resides. Classic ASP Code to call Web service <%Option Explicit Dim objRequest, objXMLDoc, objXmlNode Dim strRet, strError, strNome Dim strName strName= "deepa" Set objRequest = Server.createobject("MSXML2.XMLHTTP") With objRequest .open "GET", "http://localhost:3106/WebService1.asmx/HelloWorld?name=" & strName, False .setRequestHeader "Content-Type", "text/xml" .setRequestHeader "SOAPAction", "http://localhost:3106/WebService1.asmx/HelloWorld" .send End With Set objXMLDoc = Server.createobject("MSXML2.DOMDocument") objXmlDoc.async = false Response.ContentType = "text/xml" Response.Write(objRequest.ResponseText) %> In Line 6 I created an MSXML XMLHTTP object. Line 9 Using the HTTPGET protocol I am openinig connection to WebService Line 10:11 – setting the Header for the service In line 15, I am getting the output from the webservice in XML Doc format & reading the responseText(line 18). In line 9 if you observe I am passing the parameter strName to the Webservice You can pass multiple parameters to the Web service by just like any other QueryString Parameters. In similar fashion you can invoke the Web service using HTTPPost. Only you have to ensure that the form contains all th required parameters for webmethod.  Happy coding !!!!!!!

    Read the article

  • Silverlight Cream for March 23, 2010 -- #818

    - by Dave Campbell
    In this Issue: Max Paulousky, Jeremy Likness, Mark Tucker, Christian Schormann, Page Brooks, Brad Abrams(-2-), Jeff Wilcox, Unnir, Bea Stollnitz, John Papa and Adam Kinney, and Bill Reiss(-2-). Shoutouts: Ashish Shetty posted his material from his MIX10 presentation: Stepping outside the browser with Silverlight 4 Not Silverlight, but dang useful, Karl Shifflett posted a Visual Studio 2010 XAML Editor IntelliSense Presenter Extension Yavor Georgiev posted his MIX10 material: Two samples from today's MIX talk From SilverlightCream.com: GroupBox Sketching Control for WPF applications Using Blend Max Paulousky creates a GroupBox control for SketchFlow for WPF. He includes a link to an example of doing the same for Silverlight. Sequential Asynchronous Workflows in Silverlight using Coroutines Jeremy Likness' latest post begann with a post on the Silverlight.net forum and Rob Eisenburg's MVVM presentation from MIX10 resulting in the use of Wintellect's PowerThreading library (downloadable), and Coroutines. Windows Phone 7 UI Templates Mark Tucker has been putting a lot of thought into WP7 apps and produced 5 templates for building apps, downloadable in PowerPoint format. He's also looking to discuss this concept. Blend 4: About Path Layout, Part I Christian Schormann has a great tutorial up about Expression Blend 4 and path layout ... this is lots of great info, and it's only part 1! Custom Splash Screen for Windows Phone Page Brooks makes very quick work of showing how to add a splash screen to your WP7 app... very nice, Page! Silverlight 4 + RIA Services - Ready for Business: Exposing Data from Entity Framework Brad Abrams next post in the series is is on pulling your data from wherever it lives, and uses a DomainService to shape it for your Silverlight app. Silverlight 4 + RIA Services - Ready for Business: Consuming Data in the Silverlight Client Brad Abrams then discusses consuming that data in a Silverlight app. Not much code involvement at all.. great ROI :) Building Silverlight 3 and Silverlight 4 applications on a .NET 3.5 build machine Jeff Wilcox talks about building Silverlight 3 and Silverlight 4B both on a .NET 3.5 machine. He then adds in the Toolkit, and even WCF RIA Services. Expression Blend 4 - XAML generation tweaks Unnir demonstrates a few changes to Expression Blend 4 that produce more compact XAML. He's also asking for other examples you'd like to see tightened up. How can I sort a hierarchy? Bea Stollnitz posts plausible solutions to sorting data items at each level of a hierarchical UI, with descriptions of why they don't work, followed by the real deal... Silverlight and WPF. Silverlight Training Course (Silverlight 4) John Papa and Adam Kinney have posted a huge body of work to get us up-to-speed on Silverlight 4 -- a WhitePaper, hands-on labs, and an 8-unit course with 25 accompanying videos... geez... Silverlight game development on Windows Phone 7 Bill Reiss has a post up discussing game development on WP7 in general and then discusses his SilverSprite library, with a link to it. XNA or Silverlight for Windows Phone 7 game development? Bill Reiss next discusses the advantage of using Silverlight or XNA for your WP7 game development, and who better to discuss both? Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • SQL – Quick Start with Admin Sections of NuoDB – Manage NuoDB Database

    - by Pinal Dave
    In the yesterday’s blog post we have seen that it is extremely easy to install the NuoDB database on your local machine. Now that the application is properly set up, let us explore NuoDB a bit more and get you familiar with the how it works and what the important areas of the NuoDB are that you should learn. As we have already installed NuoDB, now we will quickly start with two of the important areas in NuoDB: 1) Admin and 2) Explorer. In this blog post I will explore how the Admin Section of the NuoDB Console works.  In the next blog post we will learn how the Explorer Section works. Let us go to the NuoDB Console by typing the following URL in your browser: http://localhost:8080/ It will bring you to the following screen: On this screen you can see a big Start QuickStart button. Click on the button and it will bring you to following screen. On this screen you will find very important information about Domain and Database Settings. It is our habit that we do not read what is written on the screen and keep on clicking on continue without reading. While we are familiar with most wizards, we can often miss the very important message on the screen. Please note the information of Domain Settings and Database Settings from the following screen before clicking on Create Database. Domain Settings User: quickstart Password: quickstart Database Settings User: dba Password: goalie Database: test Schema: HOCKEY Once you click on the Create Database button it will immediately start creating sample database. First, it will start a Storage Manager and right after that it will start a Transaction Engine. Once the engine is up, it will Create a Schema and Sample Data. On the success of the creating the sample database it will show the following screen. Now is the time where we can explore the NuoDB Admin or NuoDB Explorer. If you click on Admin, it will first show following login screen. Enter for the username “domain” and for the password “bird”. Alternatively you can enter “quickstart”  twice for username and password.  It works as too. Once you enter into the Admin Section, on the left side you can see information about NuoDB and Admin Console and on the right side you can see the domain overview area. From this Administrative section you can do any of the following tasks: Create a view of the entire domain Add and remove databases Start and stop NuoDB Transaction Engines and Storage Managers Monitor transaction across all the NuoDB databases On the right side of the Admin Section we can see various information about a particular NuoDB domain. You can quickly view various alerts, find out information about the number of host machines that are provisioned for the domain, and see the number of databases and processes that are running in the domain. If you click on the “1 host” link you will be able to see various processes, CPU usage and other information. In the Processes Section you can see that there are two different types of processes. The first process (where you can see the floppy drive icon) represents a running Storage Manager process and the second process a running Transaction Engine process. You can click on the links for the Storage Manager and Transaction Engine to see further statistical details right down to the last byte of the data. There are various charts available for analysis as well. I think the product is quite mature and the user can add different monitor charts to the Admin section. Additionally, the Admin section is the place where you can create and manage new databases. I hope today’s tutorial gives you enough confidence that you can try out NuoDB and checkout various administrative activities with the database. I am personally impressed with their dashboard related to various counters. For more information about how the NuoDB architecture works and what a Storage Manager or Transaction Engine does, check out this short video with NuoDB CTO Seth Proctor:  In the next blog post, we will try out the Explorer section of NuoDB, which allows us to run SQL queries and write SQL code.  Meanwhile, I strongly suggest you download and install NuoDB and get yourself familiar with the product. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

    Read the article

  • Silverlight Cream for May 15, 2010 -- #862

    - by Dave Campbell
    In this Issue: Victor Gaudioso, Antoni Dol(-2-), Brian Genisio, Shawn Wildermuth, Mike Snow, Phil Middlemiss, Pete Brown, Kirupa, Dan Wahlin, Glenn Block, Jeff Prosise, Anoop Madhusudanan, and Adam Kinney. Shoutouts: Victor Gaudioso would like you to Checkout my Interview with Microsoft’s Murray Gordon at MIX 10 Pete Brown announced: Connected Show Podcast #29 With … Me! From SilverlightCream.com: New Silverlight Video Tutorial: How to Create Fast Forward for the MediaElement Victor Gaudioso's latest video tutorial is on creating the ability to fast-forward a MediaElement... check it out in the tutorial player itself! Overlapping TabItems with the Silverlight Toolkit TabControl Antoni Dol has a very cool tutorial up on the Toolkit TabItems control... not only is he overlapping them quite nicely but this is a very cool tutorial... QuoteFloat: Animating TextBlock PlaneProjections for a spiraling effect in Silverlight Antoni Dol also has a Blend tutorial up on animating TextBlock items... run the demo and you'll want to read the rest :) Adventures in MVVM – My ViewModel Base – Silverlight Support! Brian Genisio continues his MVVM tutorials with this update on his ViewModel base using some new C# 4.0 features, and fully supports Silverlight and WPF My Thoughts on the Windows Phone 7 Shawn Wildermuth gives his take on WP7. He included a port of his XBoxGames app to WP7 ... thanks Shawn! Silverlight Tip of the Day #20 – Using Tooltips in Silverlight I figured Mike Snow was going to overrun me with tips since I have missed a couple days, but there's only one! ... and it's on Tooltips. Animating the Silverlight opacity mask Phil Middlemiss has an article at SilverZine describing a Behavior he wrote (and is sharing) that turns a FrameworkElement into an opacity mask for it's parent container... cool demo on the page too. Breaking Apart the Margin Property in Xaml for better Binding Pete Brown dug in on a Twitter message and put some thoughts down about breaking a Margin apart to see about binding to the individual elements. Building a Simple Windows Phone App Kirupa has a 6-part tutorial up on building not-your-typical first WP7 application... all good stuff! Integrating HTML into Silverlight Applications Dan Wahlin has a post up discussing three ways to display HTML inside a Silverlight app. Hello MEF in Silverlight 4 and VB! (with an MVVM Light cameo) Glenn Block has a post up discussing MEF, MVVM, and it's in VB this time... and it's actually a great tutorial top to bottom... all source included of course :) Understanding Input Scope in Silverlight for Windows Phone Jeff Prosise has a good post up on the WP7 SIP and how to set the proper InputScope to get the SIP you want. Thinking about Silverlight ‘desktop’ apps – Creating a Standalone Installer for offline installation (no browser) Anoop Madhusudanan is discussing something that's been floating around for a while... installing Silverlight from, say, a CD or DVD when someone installs your app. He's got some good code, but be sure to read Tim Heuer and Scott Guthrie's comments, and consider digging deeper into that part. Using FluidMoveBehavior to animate grid coordinates in Silverlight Adam Kinney has a cool post up on animating an object using the FluidMotionBehavior of Blend 4... looks great moving across a checkerboard... check out the demo, then grab the code. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • SQL SERVER – MSQL_XP – Wait Type – Day 20 of 28

    - by pinaldave
    In this blog post, I am going to discuss something from my field experience. While consultation, I have seen various wait typed, but one of my customers who has been using SQL Server for all his operations had an interesting issue with a particular wait type. Our customer had more than 100+ SQL Server instances running and the whole server had MSSQL_XP wait type as the most number of wait types. While running sp_who2 and other diagnosis queries, I could not immediately figure out what the issue was because the query with that kind of wait type was nowhere to be found. After a day of research, I was relieved that the solution was very easy to figure out. Let us continue discussing this wait type. From Book On-Line: ?MSQL_XP occurs when a task is waiting for an extended stored procedure to end. SQL Server uses this wait state to detect potential MARS application deadlocks. The wait stops when the extended stored procedure call ends. MSQL_XP Explanation: This wait type is created because of the extended stored procedure. Extended Stored Procedures are executed within SQL Server; however, SQL Server has no control over them. Unless you know what the code for the extended stored procedure is and what it is doing, it is impossible to understand why this wait type is coming up. Reducing MSQL_XP wait: As discussed, it is hard to understand the Extended Stored Procedure if the code for it is not available. In the scenario described at the beginning of this post, our client was using third-party backup tool. The third-party backup tool was using Extended Stored Procedure. After we learned that this wait type was coming from the extended stored procedure of the backup tool they were using, we contacted the tech team of its vendor. The vendor admitted that the code was not optimal at some places, and within that day they had provided the patch. Once the updated version was installed, the issue on this wait type disappeared. As viewed in the wait statistics of all the 100+ SQL Server, there was no more MSSQL_XP wait type found. In simpler terms, you must first identify which Extended Stored Procedure is creating the wait type of MSSQL_XP and see if you can get in touch with the creator of the SP so you can help them optimize the code. If you have encountered this MSSQL_XP wait type, I encourage all of you to write how you managed it. Please do not mention the name of the vendor in your comment as I will not approve it. The focus of this blog post is to understand the wait types; not talk about others. Read all the post in the Wait Types and Queue series. Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussion of Wait Stats in this blog is generic and varies from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

    Read the article

  • Asynchrony in C# 5: Dataflow Async Logger Sample

    - by javarg
    Check out this (very simple) code examples for TPL Dataflow. Suppose you are developing an Async Logger to register application events to different sinks or log writers. The logger architecture would be as follow: Note how blocks can be composed to achieved desired behavior. The BufferBlock<T> is the pool of log entries to be process whereas linked ActionBlock<TInput> represent the log writers or sinks. The previous composition would allows only one ActionBlock to consume entries at a time. Implementation code would be something similar to (add reference to System.Threading.Tasks.Dataflow.dll in %User Documents%\Microsoft Visual Studio Async CTP\Documentation): TPL Dataflow Logger var bufferBlock = new BufferBlock<Tuple<LogLevel, string>>(); ActionBlock<Tuple<LogLevel, string>> infoLogger =     new ActionBlock<Tuple<LogLevel, string>>(         e => Console.WriteLine("Info: {0}", e.Item2)); ActionBlock<Tuple<LogLevel, string>> errorLogger =     new ActionBlock<Tuple<LogLevel, string>>(         e => Console.WriteLine("Error: {0}", e.Item2)); bufferBlock.LinkTo(infoLogger, e => (e.Item1 & LogLevel.Info) != LogLevel.None); bufferBlock.LinkTo(errorLogger, e => (e.Item1 & LogLevel.Error) != LogLevel.None); bufferBlock.Post(new Tuple<LogLevel, string>(LogLevel.Info, "info message")); bufferBlock.Post(new Tuple<LogLevel, string>(LogLevel.Error, "error message")); Note the filter applied to each link (in this case, the Logging Level selects the writer used). We can specify message filters using Predicate functions on each link. Now, the previous sample is useless for a Logger since Logging Level is not exclusive (thus, several writers could be used to process a single message). Let´s use a Broadcast<T> buffer instead of a BufferBlock<T>. Broadcast Logger var bufferBlock = new BroadcastBlock<Tuple<LogLevel, string>>(     e => new Tuple<LogLevel, string>(e.Item1, e.Item2)); ActionBlock<Tuple<LogLevel, string>> infoLogger =     new ActionBlock<Tuple<LogLevel, string>>(         e => Console.WriteLine("Info: {0}", e.Item2)); ActionBlock<Tuple<LogLevel, string>> errorLogger =     new ActionBlock<Tuple<LogLevel, string>>(         e => Console.WriteLine("Error: {0}", e.Item2)); ActionBlock<Tuple<LogLevel, string>> allLogger =     new ActionBlock<Tuple<LogLevel, string>>(     e => Console.WriteLine("All: {0}", e.Item2)); bufferBlock.LinkTo(infoLogger, e => (e.Item1 & LogLevel.Info) != LogLevel.None); bufferBlock.LinkTo(errorLogger, e => (e.Item1 & LogLevel.Error) != LogLevel.None); bufferBlock.LinkTo(allLogger, e => (e.Item1 & LogLevel.All) != LogLevel.None); bufferBlock.Post(new Tuple<LogLevel, string>(LogLevel.Info, "info message")); bufferBlock.Post(new Tuple<LogLevel, string>(LogLevel.Error, "error message")); As this block copies the message to all its outputs, we need to define the copy function in the block constructor. In this case we create a new Tuple, but you can always use the Identity function if passing the same reference to every output. Try both scenarios and compare the results.

    Read the article

  • concurrency::accelerator_view

    - by Daniel Moth
    Overview We saw previously that accelerator represents a target for our C++ AMP computation or memory allocation and that there is a notion of a default accelerator. We ended that post by introducing how one can obtain accelerator_view objects from an accelerator object through the accelerator class's default_view property and the create_view method. The accelerator_view objects can be thought of as handles to an accelerator. You can also construct an accelerator_view given another accelerator_view (through the copy constructor or the assignment operator overload). Speaking of operator overloading, you can also compare (for equality and inequality) two accelerator_view objects between them to determine if they refer to the same underlying accelerator. We'll see later that when we use concurrency::array objects, the allocation of data takes place on an accelerator at array construction time, so there is a constructor overload that accepts an accelerator_view object. We'll also see later that a new concurrency::parallel_for_each function overload can take an accelerator_view object, so it knows on what target to execute the computation (represented by a lambda that the parallel_for_each also accepts). Beyond normal usage, accelerator_view is a quality of service concept that offers isolation to multiple "consumers" of an accelerator. If in your code you are accessing the accelerator from multiple threads (or, in general, from different parts of your app), then you'll want to create separate accelerator_view objects for each thread. flush, wait, and queuing_mode When you create an accelerator_view via the create_view method of the accelerator, you pass in an option of immediate or deferred, which are the two members of the queuing_mode enum. At any point you can access this value from the queuing_mode property of the accelerator_view. When the queuing_mode value is immediate (which is the default), any commands sent to the device such as kernel invocations and data transfers (e.g. parallel_for_each and copy, as we'll see in future posts), will get submitted as soon as the runtime sees fit (that is the definition of immediate). When the value of queuing_mode is deferred, the commands will be batched up. To send all buffered commands to the device for execution, there is a non-blocking flush method that you can call. If you wish to block until all the commands have been sent, there is a wait method you can call. Deferring is a more advanced scenario aimed at performance gains when you are submitting many device commands and you want to avoid the tiny overhead of flushing/submitting each command separately. Querying information Just like accelerator, accelerator_view exposes the is_debug and version properties. In fact, you can always access the accelerator object from the accelerator property on the accelerator_view class to access the accelerator interface we looked at previously. Interop with D3D (aka DX) In a later post I'll show an example of an app that uses C++ AMP to compute data that is used in pixel shaders. In those scenarios, you can benefit by integrating C++ AMP into your graphics pipeline and one of the building blocks for that is being able to use the same device context from both the compute kernel and the other shaders. You can do that by going from accelerator_view to device context (and vice versa), through part of our interop API in amp.h: *get_device, create_accelerator_view. More on those in a later post. Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

< Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >