Search Results

Search found 6064 results on 243 pages for 'usb 2'.

Page 229/243 | < Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >

• How to automatically start VM created by virt-manager?

  - by Jeff Shattock

  I have created a virtual machine with virt-manager that runs on kvm/qemu. The machine works well when started through virt-manager. However, I would like to be able to start and stop the VM through a script in init.d, so that it comes up and down along with the host. I need to have virt-manager show that the machine is running, and to be able to connect to its console through there. When I use the command line that is produced by running ps -eaf | grep kvm after starting the vm through virt-manager, I get some console messages about redirected character devices, but the machine does start and runs properly. However, I do not get any indication from virt-manager that it has started. How can I modify the command line to get virt-manager to pick up the running VM? Is there anything else about the command line that should change when starting outside of virt-manager? Command line is (slightly reformatted for readability): /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 512 -smp 1 -name BORON \ -uuid fa7e5fbd-7d8e-43c4-ebd9-1504a4383eb1 \ -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/BORON.monitor,server,nowait \ -monitor chardev:monitor -localtime -boot c \ -drive file=/dev/FS1/BORON,if=ide,index=0,boot=on,format=raw \ -net nic,macaddr=52:54:00:20:0b:fd,vlan=0,name=nic.0 \ -net tap,fd=41,vlan=0,name=tap.0 -chardev pty,id=serial0 -serial chardev:serial0 \ -parallel none -usb -usbdevice tablet -vnc 127.0.0.1:1 -k en-us -vga cirrus

  Read the article

• wireless to wired internet

  - by Mark T

  My wife uses an old computer which doesn't really like having an internet connection via a USB wireless adapter. I've tried several, and none have been satisfactory. The connection gets dropped often and it is frustrating for her. A wireless card also had the same trouble. Repositioning the computer made no difference. (Two laptops, nearby, connect just fine and stay up, so it isn't the router.) However, the computer always worked well when I had an Ethernet cable connected to it. I know there is a box which will connect to my wireless network and provide an Ethernet cable connection. But the terminology used is so complex, I can't tell what it is I really need. In case that wasn't clear, here it is in different words: What I need is just the opposite of a wireless router. My wireless router takes my cable modem's Ethernet connection and makes it available to wireless clients. What I want is a box which is a wireless client to my wireless router and provides an Ethernet cable connection that I can connect to any device. I need to know the right name for a box with such capabilities. If you know of some inexpensive examples, that would also be helpful. I'm running a wireless G network with a Linksys Router.

  Read the article

• Need help ttoubleshooting PC

  - by brux

  I have had problems since my dog pee'd on my computer. Problem: loads windows fine, at random intervals from 5 minutes to 30 minutes it restarts itself. There is nothing in the event log such as errors, no BSOD, just cold restart. after rstarting - sometimes- it POST's and restarts itself at the end of POST. It will do this many times and then finally load windows. The cycle then begins again, it will restart eventually. What i have done: I thought it was HDD at first, since this is the only part of the coputer which actually got wet with any fluid ( the case is off the PC and the dog pee'd down the front where the HDD is located). Seatool, the seagate HDD tool, found errors when I ran it inside windows, so I ran it in DOS mode from bootable USB and ran it. It found the same number of errors and fixed them all. I ran the scan again and it says "Good". I loaded windows and ran the scan and it also said "Good there. So the HDD apears to be fine but the problem persists, random restarts. What else could this be? I have taken the computer apart and cleaned everything and also taken the PSU apart and cleaned it thoughrouly. The problem still persists, what should my next steps be? Thanks in advance.

  Read the article

• Is it safe to force a dismount to format a volume in Windows?

  - by sammyg

  I am using format command in cmd to format a USB flash drive. M:\>format /FS:FAT32 /Q Required parameter missing - M:\>format M: /FS:FAT32 /Q Insert new disk for drive M: and press ENTER when ready... The type of the file system is FAT32. QuickFormatting 14999M Format cannot run because the volume is in use by another process. Format may run if this volume is dismounted first. ALL OPENED HANDLES TO THIS VOLUME WOULD THEN BE INVALID. Would you like to force a dismount on this volume? (Y/N) y Volume dismounted. All opened handles to this volume are now invalid. Initializing the File Allocation Table (FAT)... Volume label (11 characters, ENTER for none)? Format complete. 14,6 GB total disk space. 14,6 GB are available. 8 192 bytes in each allocation unit. 1 917 823 allocation units available on disk. 32 bits in each FAT entry. Volume Serial Number is E00B-2739 M:\> Is it safe to force a dismount like this, and make the handles invalid?

  Read the article

• Windows 7 does not detect my new hard drive?

  - by jasondavis

  I just built a really nice new PC. Some specs... Intel i7-930 CPU ASRock Extreme X58 motherboard with sata 3 and USB 3.0 12gb of G-Skill DDR3 RAM 80gb Intel G2 Solid state drive for Windows 7 and other programs to run on Windows 7 Pro 64bit OS 2 1gb grapghic cards for 4 monitor support Thats the main components. Well today my new 1tb western digital hard drive came which I plan to use for data to preserve the life of my SSD (hopefully). I hooked up it's sata power input and then hooked up it's sata data cable to a sata 2 port on my motherboard, I boot windows 7 and go into my computer and the drive is not showing up with my other drives. I then re-boot again and check again, no luck. I then shut down the PC and open the case back up, I then check my connections and they all look good. I then boot up and I can see the new HD is on and spinning. I then go into my BIOS settings to see if it registers there and it DOES! It shows I have a WD 1tb hard drvie on sata 2 port 6. So I am at a loss of why it is not showing up as an option in windows? Windows acts as if the drive is not there. Please help

  Read the article

• Recovering data from an external hard drive

  - by CCallaghan

  I have a WD Elements 2GB hard drive (formatted NTFS). I accidentally kicked out the USB cable while writing data to the disk, and now I can't access most of the data. Although this was ostensibly my backup drive, there is a great deal of important material on there which was only on there. I realise how idiotic this makes me. (So, formatting is not an option.) Things I've tried/information I've gathered: Windows Explorer will recognise the drive itself. However, it will not access most directories therein (and will sometimes crash when exploring). I can access all of the directories through the command line, but the dir command will often report that it can't read any files in most of the directories. The situation was similar when I hooked it up to an Ubuntu machine: the file explorer crashed, but I could access directories - but not files in those directories - via terminal commands. Several files I tried to copy out either resulted in an I/O error being reported or resulted in the command line crashing. The Disk Management utility on Windows reports a healthy disk formatted as NTFS and not RAW. It also indicates the correct amount of space used up and its capacity (so it seems that the files are not deleted). I've tried to run chkdsk, but that hangs on Step 2 (checking indexes) at 74%. Step 1 reported no bad sectors. I tried Recuva, but that didn't seem to work (stalled at 0% for half an hour). I should also note that the disk doesn't seem to be spinning smoothly; it seems to be chopping back, like it's reading the same sector over and over again. I noticed this after I kicked out the cable. Any help would be greatly appreciated. Update: It would seem the problem has taken a turn for the worse. The external hard drive now shows up on my computer as a local disk and is not mountable by Linux.

  Read the article

• Debian: Unable to mount a second drive as a subdirectory inside of another partition.

  - by jkndrkn

  Hello. I have the following /etc/fstab: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/md1 / ext3 defaults,errors=remount-ro 0 1 /dev/md0 /boot ext3 defaults 0 2 /dev/md5 /home ext3 defaults 0 2 /dev/md3 /opt ext3 defaults 0 2 /dev/md6 /tmp ext3 defaults 0 2 /dev/md2 /usr ext3 defaults 0 2 /dev/md4 /var ext3 defaults 0 2 /dev/md7 none swap sw 0 0 /dev/sdc /home/httpd ext3 defaults 0 2 /dev/hda /media/cdrom0 udf,iso9660 user,noauto 0 0 /dev/sdc1 /mnt/usb/backup-1 auto defaults 0 0 I am unable to get /dev/sdc/ to mount at /home/httpd/ on reboot. The /home/httpd/ directory exists. Mounting via mount -t ext3 /dev/sdc /home/httpd works just fine. Mounting via mount -a generates the following error message: mount: you must specify the filesystem type This is, incidentally, the same message that I see while booting. The error message goes away if I comment out the line in fstab starting with /dev/sdc.

  Read the article

• Microphone array support in Windows. Info on performance and compatible hardware?

  - by exinocactus

  It is officially claimed by Microsoft (Audio Device Technologies for Windows), that Windows Vista has an integrated system-level support of microphone arrays for improved sound capturing by isolating a sound source in target direction and rejecting ambient noise and reverberation. In more technical terms, an implementation of an adaptive beamformer. Theoretically, microphone arrays with 2-4 mics can substantially improve SNR under some conditions like speaker in front of the laptop in noisy environment (airport, cafe). Surprisingly, though, I find very little information about commercially-available products supporting these new features. I mean products like portable usb micropone arrays or laptops or flat screens with integrated mic arrays. I could only find info about two laptop models having "noise cancelling digital array microphone". These are Dell Latitude and Eee PC 1008P-KR. Now my questions: Do you have any experience with the Windows beamformer implementation? For instance, in the above mentioned laptops. How well does it work? Are there any tests results available in the net or in print (papers?)? Do you know about other microphone array hardware? What could be the reason why mic array technology didn't get sucess Is there mic arrays support in 'Windows 7'?

  Read the article

• Suggestions for cleaning up the mess after removing the "system tool" virus?

  - by Ross

  Hi! Last night I got infected with the "System Tool" virus. For those who don't know it disallows the user from executing any software, changes the desktop, stops all security software from running, and continually requests that you buy a Trojan security software. It took me a few hours but I finally managed to remove the software. To do this I went into my Ubuntu partition and searched out files that had been created around the time that I got infected and deleted the executable. Then I went back into my W7 partition and ran an MBAM full scan, an MSE full scan, an AVG bootable USB scan, and ran a ClamAV scan from my Ubuntu partition (Together these found 3 more infected executables). I also ran a Ccleaner full sweep and the registry cleaner just in case. I think I have found all of the problems but am still concerned that there might be a payload leftover from the virus that I didn't find. Do you have any suggestions of what else I can do to be sure. Just FYI I use W7 64 bit and MSE as my primary antivirus. I was using chrome when I got infected and it seems that it was due to a slightly out of date Java installation (MSE gave me a warning that the website had used a Java exploit and then my desktop changed to the classic "System Tools" desktop) Thank you very much for your help.

  Read the article

• How to set an executable white list?

  - by izabera

  Under Linux, is it possible to set a white-list of executables for a certain group of users? I need them to be unable to use, for example, make, gcc and executables on removable disks. How can this be done? Edit, let me explain better. I'm dealing with a high school IT system, young geeks that (during the lessons) want to play, surf the net, damage those computer however they can. The major step to achieve this goal was to remove the system they're familiar with and install Ubuntu in all the computers. This actually works quite well, but recent events proved that this is not enough. I want to allow them to execute certain safe programs, like Open Office, and to deny any other program, whether it is preinstalled software, something they carry in usb drives, a downloaded program or a script they program on site. It's possible to remove the 'x' permission on any file on the pc, but of course it would be impractical. Furthermore, they would be able to run anything they download. I thought the best solution would be to make a white-list of safe programs and to deny anything else, but I don't really know how to do it. Any idea is helpful.

  Read the article

• Windows 7 explorer crashing trying to read external hard disk

  - by Mario De Schaepmeester

  I have a 1TB Western Digital hard drive which is almost full and last time I tried to plug it into my laptop, I got a Windows dialog saying "this hard drive needs to be formatted". I did not panic because I have experienced things like this before and I know it's often solved by simply re-inserting the drive. Now however, whenever I plug it in and try to browse it in explorer by going to "computer", the explorer process crashes after a while. I simply close explorer since it takes ages trying to read the disk and nothing happens. After searching on the internet, the best thing to do would be a chkdsk. I tried it via properties in explorer (which also took a good 5 minutes to open up), locks up as well, after waiting a couple of minutes it says there's no access to the disk so a chkdsk is not possible... I want to make clear that I always use safe removal before pulling out the USB cable. Last time however, safe removal just would not work and when trying to shut down Windows, the logoff screen just would not disappear (I've waited at least 10 minutes or so) and I powered off the PC by force. This may be the cause of the problems but the disk was still recognised immediately after that. I really don't want to format this thing because it contains C: clones of 3 computers and a lot of other stuff that I don't want to re-copy. What would be the best course of action? Update I got chkdsk working via the command line. I used the /F and /R options. I already got a bunch of lines saying "file record segment X is unreadable" or whatever it is in English, my OS is Dutch. It looks bad... Will chdsk repair these errors?

  Read the article

• Is my motherboard failing, or is there some other issue?

  - by ThatGuy

  So, several months ago I put together my own desktop PC. I set up a dual boot to Windows and Ubuntu. Recently, without changing any settings or installing anything new, the wifi stopped working on windows (I use a wifi adapter). It said it was connected, Network settings showed that it was working and running trouble shooting had no results. My internet still works on any other device. I found that removing the adapter from the motherboard and plugging it back in was the only thing that fixed the problem. Reinstalling the wifi drivers did not help. I purchased a new Wifi adapter, but the problem persists. More recently, I had a much more discouraging development. Sometimes, turning on the computer results in a boot loop: BIOS never starts. Instead, the monitor turns on as if it got a signal, then immediately turns off. This loops on it's own indefinitely until I hold down power, hard reset it, and try again. Sometimes it works, sometimes it doesn't. I haven't tested much on the Ubuntu side. It appears that wifi works at least some of the time, but since I've had issues just getting to BIOS I'm not confident the issue is on the software side. I've also noticed issues with some of the USB ports no longer working, but that seems to be off and on. Finally, as of a few minutes ago, I booted to windows to discover that everything was running very slowly. Slow here is a relative word, but I have a Samsung 840 pro SSD and I'm used to applications running nigh instantly, and it was a solid 3 minutes before any of my applications would load. Anyway, my question is this: Is it likely that my motherboard is failing? Either way, what steps can I take to try and pin down the problem and figure out what to do?

  Read the article

• Custom PCI bracket with support, for custom PCB?

  - by newbiez

  I am considering to put a custom PCB card that I made, into my computer. It won't go on any PCI connector, it plugs in on a USB connector on the motherboard, via a ribbon cable. I need thou to plug a device to it; which means that either I leave the PCB outside the case, hanging by the ribbon (bad idea), or I could put it in a PCI slot, using a bracket. The issue is that the brackets that I have, do not have tabs, so I have no way to screw the PCB on them. I was hoping to find something that would allow me to put the PCB on it, and then just fit it in the PCI bracket opening, like this: http://www.idotpc.com/TheStore/pc/viewPrd.asp?idproduct=1203&idcategory=0 This one won't fit the bill since the holes are too close apart, compared to the one that I have already on the PCB (and can't make more holes). Do you know if there is a place where they make universal PCI bracket mounting systems for custom PCB? I just need one, so can't even order a custom one (they ask me 120 dollars for one). Thanks in advance!

  Read the article

• FTP Server upload and filesystem questions

  - by Alex

  I'm a photographer who mainly does event photography. A while ago I bought myself a Nikon WT-4 wireless transmitter, a small device which connects via USB to my Nikon D700 DSLR, and then establishes a WiFi connection to an existing WLAN. It can then upload any pictures I take via FTP to an FTP server somewhere in the network. On my laptop I then have a piece of software which will check a given folder on the disk regularly, this software is smart enough to look at the modified file timestamp, if this timestamp is less than 10 seconds ago, it will not attempt to import the folder and skip the file in this iteration of the import scan. The problem I've discovered seems to be inherent to the FTP protocol, as I have the same problem with Windows 7 built in IIS server, as I do with FileZilla FTP server. When the transmitter starts to upload a file, the FTP server will create a small 300-500 KB file with the correct filename on the disk, but then do nothing with the file until it has completely received the file via FTP. So it seems to create this small dummy file, and then buffer the remainder of the FTP upload until it's finished, and then dump the rest of the file into the dummy file making it the correct size. Problem is, these uploads take about 15-30 seconds depending on reception, but since the folder watch tool will already try to import any file older than 10 seconds, it will always try to import the small dummy files which obviously fails as they're not copmlete yet. Is there any way to 'disable' this behaviour? Ideally I would like my file only to show up once it's been completely uploaded. Or perhaps someone knows another FTP server application (it has to run on win7) which does not show this behaviour?

  Read the article

• Computer freezes after watching Youtube videos

  - by Roberts

  I had Windows 7 installed all september. But I installed Windows XP Professional back because my computer couldn't handle the new OS. After first boot I tried to install newest flash player (from Adobe website), but it failed. I had my old setup on USB drive and it worked. I don't know is it important or not. I am watching Youtube videos in my free time (almost every hour). After few days the computer started to freeze when I open a page with the video or close the page with video, not while I watch a video. No BSODs. Nothing in Event viewer. I use Firefox only. When computer freezes the sound wont. If iTunes is playing a radio station or is it another video playing in background, the sound wont freeze. Last few days the mouse wont freeze. Its a strange symptom. If I click few times then the cursor will actually freeze. I just want to know where does this problem come from (hardware - graphics card, old motherboard or it's just some glitch in setups). If it's not graphics card then I will be happy. The graphics card is ATI Radeon HD 4650 - brand new. Catalyst 11.8 installed. Things I have tried: Installed newest flash player after a week (the setup didn't fail this time) Installed latest video drivers Deleting cookies Defragmenting hard drive Using TuneUp utilities for computer cleenup Installed latest Mozilla Firefox Cleaned the PC Changed CPU Fan speed almost to max (just to be sure) Things I haven't tried yet: Didn't try playing videos on other browsers What can I do now?

  Read the article

• Ubuntu 10.10 - PC shutdown before boot shortly after BIOS loads

  - by clem

  Hi - Since installing Ubuntu 10.10 from Karmic I've started getting problems with starting up the PC. I've done a complete wipe (Boot and Nuke) of the hard drive and reinstalled Ubuntu 10.10 but the problem still occurs. There is no dual boot on the PC, just Ubuntu. Here is the problem: Each morning, when I turn the PC on from being off overnight, the PC starts up and loads the BIOS. I get the following message : "Verifying DMI Pool Data... K8 NPT Data Change...Update New Data to DMI!....... Then poof the computer shuts off. However, after switching the computer back on around 6 or 7 times after it's turned itself off, it will eventually boot up without any problem. Also, once up and running for a while, I can shutdown and restart the PC first time, without any issues. I have also noticed a problem with the USB mouse being recognised and once I finally get the computer booted up, I need to unplug and then plug the mouse back in to get it working. I've opened the PC up and checked the connections (cables, cards and memory) and it all seems fine. The main issue with troubleshooting this problem is I cannot test any suggestions or fixes until the next morning because once the computer is up and running it will remain so! I do not leave the computer on overnight to save energy. So.. is this a hardware / boot software issue? This is a very odd problem and I have googled to no avail. Any suggestions? Many thanks Clem

  Read the article

• Security Token for Mac/Linux/Windows, self-managed, pref. open source?

  - by DevelopersDevelopersDevelopers

  I'm looking to buy an evaluation security token (combined smart card/usb reader) for my business that works on: Windows 7 x64 OS X 10.6.x x64 Ubuntu Linux (64 or 32 bit, 10.04 or 10.10, I can bend based on possible tokens) Functionality I need is: Login authentication Authentication for whole-disk encryption (in Linux/Windows, Mac is flexible here) Signing/encryption using PGP and x.509 certificates RSA-2048 key-capable (1024 not good enough.) I can manage the certificates myself Open source middleware/drivers (not necessarily FOSS, just source available. Can flex on this, I just want to be able to audit the code. OpenSC-compatible on Linux would be great.) Is there any token that can do all of this? Or would I need multiple ones to accomplish this? Or do I need to look at smart cards and readers to get this? I have been researching this for a while and have had a heck of a time even getting accurate information about products. Also, I am in the USA, and it appears that EU export laws prevent me from buying from there, so those vendors are out. I was looking at Feitian tokens from Gooze, but since they are in France I can't buy.

  Read the article

• Power surge PC damage: How can I test all components of my PC without access to a second computer?

  - by Doug T.

  Ever since we had some crazy power surges last week my 64 bit Windows 7 PC has been acting strange. My USB network adapter disconnects from the wireless and can't detect the signal. I have to disable/reenable the adapter to detect it again. Also my wife has reported that the PC has rebooted a few times while I'm not sitting at it. Today I finally caught the reboot while I was using the PC. I got this blue screen of death. Stop Code 0x00000109: "Modification of system code or a critical data structure was detected." I followed the advice at the linked article and ran a memory test. I used memtest86 and its already found around 300,000 errors out of 8 gigs of ram. Now I'm worried -- what are the odds this is isolated to just my memory and not just a system wide problem? Isn't there a good chance that many other components are fried? More importantly, how can I test those other components? Are there tools similar to memtest I can use to test my motherboard/video card/power supply? If these are vender specific, is it typical for vendors to provide testing tools?

  Read the article

• HP DL380 G3 2U For Basic Web Server in 2012

  - by ryandlf

  I have an opportunity to pick up a used HP DL380 G3 2U for $100. I'm looking for a basic entry level web server that I can host a small - medium size website on and more or less learn the ins and outs of running my own web server before I bite the bullet and spend a couple grand on a server. The specs are: Dual (2) Intel Xeon 2.4GHz 400MHz 512KB Cache 4GB PC2100 ECC Registered Memory 6 x 72GB 10K U320 SCSI Hard Drives Smart Array 5i RAID Controller Redundant Power Supplies DVD/Floppy, Dual Intel GB NIC's, USB Or would I be better off spending a couple hundred bucks on something like: this new HP Seems like the only major difference is SATA and a bit of storage, but I will likely be implementing a separate storage system of some sort anyways. I guess it also wouldn't hurt to mention that I plan on running a linux server distro, so would the hardware be likely to support linux with a system that is 4 generations old? I don't mind spending a couple hundred extra dollars if its a better solution, but as mentioned previously I am simple looking for a server to learn on and probably use for a year or so while I put together a small - medium size website.

  Read the article

• What's Keeping My Computer Awake?

  - by phantomdata

  Hey guys, First the question; How do I figure out what is preventing my Windows 7 computer from going into sleep mode? Second; some background... I've been struggling with this for a few days and am utterly perplexed. I setup sleep mode on my Windows 7 PC a few weeks ago, and all was well. The PC would sleep as expected and I was snuggly in knowing that my computer was saving power and some wear and tear on the components (we'll leave the 'is it better to sleep' debate for another thread/day, please don't start it). Well, I noticed the other night that my system stopped ever going to sleep. I set the sleep time down to 1 minute and wandered fully away from the PC (ensuring that no errant mouse or keyboard movements would occur) and the PC never went to sleep. I've also observed this over longer intervals as well, such as overnight. I have sleep mode enabled, of course "multimedia settings - When Sharing Media" is set to allow the computer to sleep. "powercfg -lastwake" show nothing of interest, since it never goes to sleep and can't wake up. "powercfg /requests" shows 3 entries - all "[DRIVER] ?". I assume that 2 of these are my mouse and keyboard - as I've recently used them to run the powercfg command. I'm at a loss for the third though. I've unhooked all USB peripherals save for my keyboard and mouse. Wake on LAN is disabled in my BIOS. I know that you can disable all apps from waking/preventing sleep - but I want the ability to remain for those apps that do legitimately need to keep the system awake. So; does anyone know of a way to figure out what the 3rd phantom "[DRIVER] ?" is in powercfg /requests?

  Read the article

• Shared External Drive Permission Issues

  - by connec

  So, say I share my system (C) drive through windows (E.g. properties -> Sharing -> Advanced Sharing -> Share this Folder). I can then access this drive at \\Comp\C on another networked computer - all is well. However, if I insert a removable (USB) disk, say "E", and proceed to share it the same way, when I attempt to access \\Comp\E (either directly or through browsing) I get an error: Windows cannot access \\Comp\E You do not have permission to access \\Comp\E. Contact your network administrator to request access. Now, the permissions (Advanced Sharing -> Permissions) are set with "Everyone" having read access (same as the internal drive), so this doesn't make a lot of sense. Also of note, I have an SSH server on my computer (through Cygwin) and even through SSH (logging in as an administrator user) I cannot access /cygdrive/e (although /cygdrive/c is accessible). As a final note, the drive is of course accessible on the host machine (E:\), and also at \\Comp\E on the host machine.

  Read the article

• How to disable my laptop's defective keyboard?

  - by Kolink

  I have an Alienware M17x R2, and after a couple years of use I started having problems with the keyboard: Intermittently, and without warning or apparent cause (even if I'm not touching the computer), the S key (and more recently the D key) will start firing incessant signals until I hit the offending key. I've been using a USB keyboard, which is conveniently exactly the right size to fit over the built-in keyboard without touching any buttons. However, even as I type the defective keyboard will fire its stream of signals. I have contacted Dell about this, twice in fact. The first time, I was just bluntly told that they don't ship replacement keyboards. The second time I was told that they did, but they were out of stock and they would contact me when they were in stock again. They haven't contacted me since. I can't seem to work out which device to disable in the device manager. Here's a screenshot of what I have: None of the keyboard devices have "Disable" in their context menus, only "Uninstall"... so you'll understand if I'm hesitant to try anything myself. Any advice on how to fix this?

  Read the article

• Print job leaves queue but document isn't printed

  - by midnightstar

  I'm dealing with an HP Deskjet F380 All-in-One printer. It's connected via USB to a desktop running Windows 7 Enterprise x64. If I attempt to print something like a web page or a word document, the print job will show up in the print queue and the printer would stir. By stir, I mean, it would seem to prepare itself to print. However, the print job would then leave queue (I'm thinking the computer sees it as completed) and the printer would never actually print anything. However I went into Printers and Devices under the Windows start menu, into printer properties, and print a test page, the test page would print out successfully. I attempted to uninstall and re-install the printer drivers for the printer, but the printer would continue the same behavior afterwards. I also connected the printer to another computer and the printer will print just about anything. I also checked to make sure that the computer the printer needs to be connected to was update to date as far as the OS. The machine is fully up to date. I played with the way the computer handles printer spooling. Under the printer properties, under the "Advanced" tab, I had the print job print directly to the printer. In all these instances, the same behavior continues. I've restarted the printer spooling service. I've also gone under C:\Windows\System32\spool\PRINTERS and deleted files that were sitting in the folder. I have ran SFC /scannnow and the system found no errors in the system's integrity. I had the computer and printer make a cold reboot individually. The only lead I really have going for me is that since the printer prints on other PCs, I can only assume that there is something wrong with the way the PC is configured.

  Read the article

• How can I extract data from Toshiba Satellite with a dead Windows installation?

  - by msanford

  I've got a Toshiba Satellite (unknown model number but bought early 2010) running Windows Vista which throws a kernel error on boot. We don't have the restore/recovery CD any more to restore the Windows partition. I have managed to boot to a Live CD version of Ubuntu 10.10 and have mounted the internal hard drive (which takes nearly 8 minutes). I suspect that the hard drive is malfunctioning, however, because copy tasks of even 30 megs of data to an attached and mounted USB flash drive takes over an hour, and some files are mysteriously inaccessible (not a permissions issue). When browsing folders, it takes many minutes to populate the folder window even with a single tiny file. During the copy tasks, the hard disk sounds like it tries to sleep several times in rapid succession, then continues accessing, it sounds, at full throughput. I initially tried using scp (from the shell) to copy data but I encountered the same local problems. I don't know the S.M.A.R.T. status of the hard disk, either. Is there a more effective way of going about recovering the data on the internal disk, assuming that I can't use a recovery CD and am too cheap to bring it in (for now, at least)?

  Read the article

• Laptop keyboard stopped functioning properly

  - by galdikas

  Basically today out of blue my laptop keyboard started acting up. For example I press "s" but I see "`s" on the screen. Some keys don't work at all. And the weird thing is it keeps changing, in a sense that for example in the morning I press "s" and I get "`s", then few hours later "s" works correctly.. but pressing some other key output multiple characters. Then sometimes it spontaneously will start outputting some character onto any input field that is available as soon as I click on it to gain focus. And it will just keep on going and going, as if I keep a button pressed (which I don't). At first I thought this was a virus, but I have a dual boot of Windows 7 and Ubuntu, and I get same problem on both. I even tried to boo live CD, and still had same problem. Anyone had this kind of problem? It's a Toshiba Satellite c660-258. It is around year old, but quite well kept. Never spilled anything on it, or dropped it. And my wireless USB keyboard works perfectly on it (appart from the spontaneous character inputs, which I can stop by hitting NUM LOCK key)

  Read the article

< Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >