Search Results

Search found 5762 results on 231 pages for 'clients'.

Page 23/231 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

• Need help diagnosing network performance issues

  - by tokes

  I am currently working in a developing country as a system analyst for a government department. My area of expertise is software projects, but I've come across a few issues with the network setup in my office. (Unfortunately, being a developing country, there's not a lot of professional help available for this sort of thing.) Most recently, I am trying to diagnose a problem with slowness on the network. Our office is connected to the internet via an ADSL wireless modem/router (called Router). The modem is connected via ethernet to a switch (called Switch). The modem also acts as a wireless access point (called Wireless1), though because it is in a room at the end of the floor, it's range is limited. There are ethernet ports installed around the office. The cables of these all lead back to the same switch. In closer vicinity to the bulk of the client computers, there is another wireless router that acts as an access point for those clients (called Wireless2). That router is connected via ethernet to a wall port, and therefore to Switch. There is also a Windows server which acts as a DNS server (called DNSBox) which is located in the same room and is connected directly to Switch. ---Internet----------| Router/Wireless1 192.168.10.1 ---------------| |----|=========| DNSBox | |-------------------- 192.168.10.4 --------------------| Switch |---Other clients---- | |-------------------- |----|=========| Wireless2 ------------------| 192.168.10.198 One final thing to mention about the network setup. All clients are configured with manual IP addresses. Their router/gateway is set to the IP address of Router, and their DNS server is set to the IP address of DNSBox (with a secondary IP set to an external IP - that of our ISP's DNS server). Here are the symptoms we are experiencing: Clients connected to Wireless2 AP experience slow and unstable connections to the internet. (Slow here is defined as speeds of ~1KB/s, though ping response times seem to be as normal.) Clients connected via ethernet to Switch also experience the same slowness. Clients connected to Wireless1 AP (i.e. connecting via wireless directly to the ADSL modem) experience normal connections to the internet. Clients connected via ethernet to Router (i.e. connecting via ethernet directly to the ADSL modem) also experience normal connections to the internet. I also tried to gauge the connection performance between two machines on the network via ethernet: A file transfer between two clients who were both directly connected to Switch was the fastest; A file transfer between one client directly connected to Switch, and one client directly connected to Router (which is directly connected to Switch) performed much slower; A file transfer between two clients directly connected to Router also performed slowly. Things I have attempted to diagnose the problem: Restarted Switch -- no change. We tried unplugging ethernet jacks from Switch 4 at a time and testing the internet connection. The thought here was that perhaps a client on the network has contracted a virus, and is possibly spamming the network with traffic? (Not very technical, I know.) Unfortunately we couldn't get any significant increases in performance using this method. There were a couple of times when it seemed to be better, but then the connection speed quickly dropped back to slow/dead pace. I didn't want to unplug all jacks from Switch because I was concerned that users might be affected or that I would re-plug in the jacks incorrectly (should I even be worried about that? a port is a port on a switch, right?) I tried swapping the ethernet cable used to connect Router to Switch -- no change in performance. I tried swapping the port used on Switch for Router -- no change in performance. Anyone got any ideas on what this could be? Should I be mentioning specific brand names/models of the hardware used? Virii outbreaks are common in this country/office -- what could I be doing to figure out if a virus is at fault? If it is a virus, it doesn't seem to be generating a lot of traffic to/from the internet, because a) I can still get a good speed if I am directly connected to Router / Wireless1 and b) our ISP data usage has not risen suspiciously. Thanks for your help! Update #1 Here are the specs of some of the hardware: Switch is an Edimax ES3132RL 32-Port 10/100 Rackmount Switch Router is a D-Link DSL-G604T Update #2 I just tried unplugging everything except a laptop and Router from Switch. Speeds are still slow. I guess that means that Router / Switch are not being flooded? It seems more and more likely that the cause is something to do with the interaction between Router and Switch. However, I still can't find any useful resources on setting the LAN speed for either (and I'm not well-versed in these advanced networking configurations).

  Read the article

• Strange Flash AS3 xml Socket behavior

  - by Rnd_d

  I have a problem which I can't understand. To understand it I wrote a socket client on AS3 and a server on python/twisted, you can see the code of both applications below. Let's launch two clients at the same time, arrange them so that you can see both windows and press connection button in both windows. Then press and hold any button. What I'm expecting: Client with pressed button sends a message "some data" to the server, then the server sends this message to all the clients(including the original sender) . Then each client moves right the button 'connectButton' and prints a message to the log with time in the following format: "min:secs:milliseconds". What is going wrong: The motion is smooth in the client that sends the message, but in all other clients the motion is jerky. This happens because messages to those clients arrive later than to the original sending client. And if we have three clients (let's name them A,B,C) and we send a message from A, the sending time log of B and C will be the same. Why other clients recieve this messages later than the original sender? By the way, on ubuntu 10.04/chrome all the motion is smooth. Two clients are launched in separated chromes. windows screenshot Can't post linux screenshot, need more than 10 reputation to post more hyperlinks. Listing of log, four clients simultaneously: [16:29:33.280858] 62.140.224.1 >> some data [16:29:33.280912] 87.249.9.98 << some data [16:29:33.280970] 87.249.9.98 << some data [16:29:33.281025] 87.249.9.98 << some data [16:29:33.281079] 62.140.224.1 << some data [16:29:33.323267] 62.140.224.1 >> some data [16:29:33.323326] 87.249.9.98 << some data [16:29:33.323386] 87.249.9.98 << some data [16:29:33.323440] 87.249.9.98 << some data [16:29:33.323493] 62.140.224.1 << some data [16:29:34.123435] 62.140.224.1 >> some data [16:29:34.123525] 87.249.9.98 << some data [16:29:34.123593] 87.249.9.98 << some data [16:29:34.123648] 87.249.9.98 << some data [16:29:34.123702] 62.140.224.1 << some data AS3 client code package { import adobe.utils.CustomActions; import flash.display.Sprite; import flash.events.DataEvent; import flash.events.Event; import flash.events.IOErrorEvent; import flash.events.KeyboardEvent; import flash.events.MouseEvent; import flash.events.SecurityErrorEvent; import flash.net.XMLSocket; import flash.system.Security; import flash.text.TextField; public class Main extends Sprite { private var socket :XMLSocket; private var textField :TextField = new TextField; private var connectButton :TextField = new TextField; public function Main():void { if (stage) init(); else addEventListener(Event.ADDED_TO_STAGE, init); } private function init(event:Event = null):void { socket = new XMLSocket(); socket.addEventListener(Event.CONNECT, connectHandler); socket.addEventListener(DataEvent.DATA, dataHandler); stage.addEventListener(KeyboardEvent.KEY_DOWN, keyDownHandler); addChild(textField); textField.y = 50; textField.width = 780; textField.height = 500; textField.border = true; connectButton.selectable = false; connectButton.border = true; connectButton.addEventListener(MouseEvent.MOUSE_DOWN, connectMouseDownHandler); connectButton.width = 105; connectButton.height = 20; connectButton.text = "click here to connect"; addChild(connectButton); } private function connectHandler(event:Event):void { textField.appendText("Connect\n"); textField.appendText("Press and hold any key\n"); } private function dataHandler(event:DataEvent):void { var now:Date = new Date(); textField.appendText(event.data + " time = " + now.getMinutes() + ":" + now.getSeconds() + ":" + now.getMilliseconds() + "\n"); connectButton.x += 2; } private function keyDownHandler(event:KeyboardEvent):void { socket.send("some data"); } private function connectMouseDownHandler(event:MouseEvent):void { var connectAddress:String = "ep1c.org"; var connectPort:Number = 13250; Security.loadPolicyFile("xmlsocket://" + connectAddress + ":" + String(connectPort)); socket.connect(connectAddress, connectPort); } } } Python server code from twisted.internet import reactor from twisted.internet.protocol import ServerFactory from twisted.protocols.basic import LineOnlyReceiver import datetime class EchoProtocol(LineOnlyReceiver): ##### name = "" id = 0 delimiter = chr(0) ##### def getName(self): return self.transport.getPeer().host def connectionMade(self): self.id = self.factory.getNextId() print "New connection from %s - id:%s" % (self.getName(), self.id) self.factory.clientProtocols[self.id] = self def connectionLost(self, reason): print "Lost connection from "+ self.getName() del self.factory.clientProtocols[self.id] self.factory.sendMessageToAllClients(self.getName() + " has disconnected.") def lineReceived(self, line): print "[%s] %s >> %s" % (datetime.datetime.now().time(), self, line) if line=="<policy-file-request/>": data = """<?xml version="1.0"?> <!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd"> <!-- Policy file for xmlsocket://ep1c.org --> <cross-domain-policy> <allow-access-from domain="*" to-ports="%s" /> </cross-domain-policy>""" % PORT self.send(data) else: self.factory.sendMessageToAllClients( line ) def send(self, line): print "[%s] %s << %s" % (datetime.datetime.now().time(), self, line) if line: self.transport.write( str(line) + chr(0)) else: print "Nothing to send" def __str__(self): return self.getName() class ChatProtocolFactory(ServerFactory): protocol = EchoProtocol def __init__(self): self.clientProtocols = {} self.nextId = 0 def getNextId(self): id = self.nextId self.nextId += 1 return id def sendMessageToAllClients(self, msg): for client in self.clientProtocols: self.clientProtocols[client].send(msg) def sendMessageToClient(self, id, msg): self.clientProtocols[id].send(msg) PORT = 13250 print "Starting Server" factory = ChatProtocolFactory() reactor.listenTCP(PORT, factory) reactor.run()

  Read the article

• NHibernate CreateSQLQuery data conversion from bit to boolean error

  - by RemotecUk

  Hi, Im being a bit lazy in NHibernate and using Session.CreateSqlQuery(...) instead of doing the whole thing with Lambda's. Anyway what struct me is that there seems to be a problem converting some of the types returned from (in this case the MySQL) DB into native .Net tyes. The query in question looks like this.... IList<Client> allocatableClients = Session.CreateSQLQuery( "select clients.id as Id, clients.name as Name, clients.customercode as CustomerCode, clients.superclient as SuperClient, clients.clienttypeid as ClientType " + ... ... .SetResultTransformer(new NHibernate.Transform.AliasToBeanResultTransformer(typeof(Client))).List<Client>(); The type in the database of SuperClient is a bit(1) and in the Client object the type is a bool. The error received is: System.ArgumentException: Object of type 'System.UInt64' cannot be converted to type 'System.Boolean'. It seems strange that this conversion cannot be completed. Would be greatful for any ideas. Thanks.

  Read the article

• Detecting (on the server side) when a Flex client disconnects from BlazeDS destination

  - by Alex Curtis

  Hi all, I'd like to know whether it's possible to easily detect (on the server side) when Flex clients disconnect from a BlazeDS destination please? My scenario is simply that I'd like to try and use this to figure out how long each of my clients are connected for each session. I need to be able to differentiate between clients as well (ie so not just counting the number of currently connected clients which I see in ds-console). Whilst I could program in a "I'm now logging out" process in my clients, I don't know whether this will fire if the client simply navigates away to another web page rather than going though said logout process. Can anyone suggest if there's an easy way to do this type of monitoring on the server side please. Many thanks, Alex

  Read the article

• Multiple Socket Connections

  - by BSchlinker

  I need to write a server which accepts connections from multiple client machines, maintains track of connected clients and sends individual clients data as necessary. Sometimes, all clients may be contacted at once with the same message, other times, it may be one individual client or a group of clients. Since I need confirmation that the clients received the information and don't want to build an ACK structure for a UDP connection, I decided to use a TCP streaming method. However, I've been struggling to understand how to maintain multiple connections and keep them idle. I seem to have three options. Use a fork for each incoming connection to create a separate child process, use pthread_create to create an entire new thread for each process, or use select() to wait on all open socket IDs for a connection. Recommendations as to how to attack this? I've begun working with pthreads but since performance will likely not be an issue, multicore processing is not necessary and perhaps there is a simpler way.

  Read the article

• Rails/mysql SUM distinct records - optimization

  - by pepernik

  Hey. How would you optimize this SQL SELECT SUM(tmp.cost) FROM ( SELECT DISTINCT clients.id as client, countries.credits_cost AS cost FROM countries INNER JOIN clients ON clients.country_id = countries.id INNER JOIN clients_groups ON clients_groups.client_id=clients.id WHERE clients_groups.group_id IN (1,2,3,4,5,6,7,8,9) GROUP BY clients.id ) AS tmp; I'm using this example as part of my Ruby on Rails project. Note that my nested SQL (tmp) can have more then 10 milion records. You can split that in more SQLs if the performance is better. Should I add any indexes to make it quicker (i have it on IDs)?

  Read the article

• Rails 3 render :partials

  - by user297221

  Hi guys. I am migrating my 1.8.7 rails app to rails 3. But I have a problem with a partial: I have the following partial: in my cms controller : @clients = Client.all group = render_to_string :layout = 'layouts/window', :partial = 'clients/index' in my "clients/index" partial: <%= render :partial = 'clients/item', :collection = @clients % This worked great with rails 1.7.8 but with rails 3 only the partial in the index get's rendered!. So, to clarify this, the group variable in the controller doesn't get the html from the layout. Also the weird thing is that the window layout is _window.erb (if I do window.html.erb or just window.erb rails can't find it which is strange). Does anybody know if this behavior is normal for rails 3? thanxs!

  Read the article

• EPM 11.1.2.2 Architecture: Financial Performance Management Applications

  - by Marc Schumacher

   Financial Management can be accessed either by a browser based client or by SmartView. Starting from release 11.1.2.2, the Financial Management Windows client does not longer access the Financial Management Consolidation server. All tasks that require an on line connection (e.g. load and extract tasks) can only be done using the web interface. Any client connection initiated by a browser or SmartView is send to the Oracle HTTP server (OHS) first. Based on the path given (e.g. hfmadf, hfmofficeprovider) in the URL, OHS makes a decision to forward this request either to the new Financial Management web application based on the Oracle Application Development Framework (ADF) or to the .NET based application serving SmartView retrievals running on Internet Information Server (IIS). Any requests send to the ADF web interface that need to be processed by the Financial Management application server are send to the IIS using HTTP protocol and will be forwarded further using DCOM to the Financial Management application server. SmartView requests, which are processes by IIS in first row, are forwarded to the Financial Management application server using DCOM as well. The Financial Management Application Server uses OLE DB database connections via native database clients to talk to the Financial Management database schema. Communication between the Financial Management DME Listener, which handles requests from EPMA, and the Financial Management application server is based on DCOM.  Unlike most other components Essbase Analytics Link (EAL) does not have an end user interface. The only user interface is a plug-in for the Essbase Administration Services console, which is used for administration purposes only. End users interact with a Transparent or Replicated Partition that is created in Essbase and populated with data by EAL. The Analytics Link Server deployed on WebLogic communicates through HTTP protocol with the Analytics Link Financial Management Connector that is deployed in IIS on the Financial Management web server. Analytics Link Server interacts with the Data Synchronisation server using the EAL API. The Data Synchronization server acts as a target of a Transparent or Replicated Partition in Essbase and uses a native database client to connect to the Financial Management database. Analytics Link Server uses JDBC to connect to relational repository databases and Essbase JAPI to connect to Essbase.  As most Oracle EPM System products, browser based clients and SmartView can be used to access Planning. The Java based Planning web application is deployed on WebLogic, which is configured behind an Oracle HTTP Server (OHS). Communication between Planning and the Planning RMI Registry Service is done using Java Remote Message Invocation (RMI). Planning uses JDBC to access relational repository databases and talks to Essbase using the CAPI. Be aware of the fact that beside the Planning System database a dedicated database schema is needed for each application that is set up within Planning.  As Planning, Profitability and Cost Management (HPCM) has a pretty simple architecture. Beside the browser based clients and SmartView, a web service consumer can be used as a client too. All clients access the Java based web application deployed on WebLogic through Oracle HHTP Server (OHS). Communication between Profitability and Cost Management and EPMA Web Server is done using HTTP protocol. JDBC is used to access the relational repository databases as well as data sources. Essbase JAPI is utilized to talk to Essbase.  For Strategic Finance, two clients exist, SmartView and a Windows client. While SmartView communicates through the web layer to the Strategic Finance Server, Strategic Finance Windows client makes a direct connection to the Strategic Finance Server using RPC calls. Connections from Strategic Finance Web as well as from Strategic Finance Web Services to the Strategic Finance Server are made using RPC calls too. The Strategic Finance Server uses its own file based data store. JDBC is used to connect to the EPM System Registry from web and application layer.  Disclosure Management has three kinds of clients. While the browser based client and SmartView interact with the Disclosure Management web application directly through Oracle HTTP Server (OHS), Taxonomy Designer does not connect to the Disclosure Management server. Communication to relational repository databases is done via JDBC, to connect to Essbase the Essbase JAPI is utilized.

  Read the article

• Can you force a crash if a write occurs to a given memory location with finer than page granularity?

  - by Joseph Garvin

  I'm writing a program that for performance reasons uses shared memory (alternatives have been evaluated, and they are not fast enough for my task, so suggestions to not use it will be downvoted). In the shared memory region I am writing many structs of a fixed size. There is one program responsible for writing the structs into shared memory, and many clients that read from it. However, there is one member of each struct that clients need to write to (a reference count, which they will update atomically). All of the other members should be read only to the clients. Because clients need to change that one member, they can't map the shared memory region as read only. But they shouldn't be tinkering with the other members either, and since these programs are written in C++, memory corruption is possible. Ideally, it should be as difficult as possible for one client to crash another. I'm only worried about buggy clients, not malicious ones, so imperfect solutions are allowed. I can try to stop clients from overwriting by declaring the members in the header they use as const, but that won't prevent memory corruption (buffer overflows, bad casts, etc.) from overwriting. I can insert canaries, but then I have to constantly pay the cost of checking them. Instead of storing the reference count member directly, I could store a pointer to the actual data in a separate mapped write only page, while keeping the structs in read only mapped pages. This will work, the OS will force my application to crash if I try to write to the pointed to data, but indirect storage can be undesirable when trying to write lock free algorithms, because needing to follow another level of indirection can change whether something can be done atomically. Is there any way to mark smaller areas of memory such that writing them will cause your app to blow up? Some platforms have hardware watchpoints, and maybe I could activate one of those with inline assembly, but I'd be limited to only 4 at a time on 32-bit x86 and each one could only cover part of the struct because they're limited to 4 bytes. It'd also make my program painful to debug ;)

  Read the article

• Why jquery ajax calls fails after session timeout in asp.net mvc?

  - by Pandiya Chendur

  when there is a value in my session variable my ajax calls work properly... But when a session is timedout it doesn't seem to work returning empty json result.... public JsonResult GetClients(int currentPage, int pageSize) { if (Session["userId"]!=null) { var clients = clirep.FindAllClients(Convert.ToInt32(Session["userId"])).AsQueryable(); var count = clients.Count(); var results = new PagedList<ClientBO>(clients, currentPage - 1, pageSize); var genericResult = new { Count = count, Results = results ,isRedirect=false}; return Json(genericResult); } else { var genericResult = new {redirectUrl = Url.Action("Create", "Registration"), isRedirect = true }; return Json(genericResult); } } However else part does'nt seem to work.... success: function(data) { alert(data.Results); if (data.isRedirect) { window.location.href = data.redirectUrl; } } EDIT: My global.asax has this, public static void RegisterRoutes(RouteCollection routes) { routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); routes.MapRoute( "Clients", "Clients/{action}/{id}", new { controller = "Clients", action = "Index", id = "" } ); routes.MapRoute( "Registrations", "{controller}/{action}/{id}", new { controller = "Registration", action = "Create", id = "" } ); }

  Read the article

• Suggestions on writing a TCP IP messaging system (Client/Server) using Delphi 2010

  - by Shane

  I would like to write a messaging system using TCP IP in Delphi 2010. I would like to hear what my best options are for using the standard delphi 2010 components/indy components for doing this. I would like to write a server which does the listening and forwarding of messages to all machines on the network running a client. 1.) a.) clients can send a message to server to be forwarded to all other clients b.) clients listen for messages from other senders (via server) and displays messages. 2.) a.) Server can send a message to all clients b.) Server forwards any messages from clients to all other clients thanks for any suggestions NOTE: I am not writing a instant messaging or chat program. This is merely a system where users can send alerts/messages to other users - they can not reply to each other! NO commercial, shareware, etc links - please! I would like to hear about how you would go about writing this type of system and what approachs you would take, and possibly the TCP IP messaging architecture you would use. Whether it be straight Winows API, Indy components, etc, etc.

  Read the article

• IDC Analyst Report Touts Oracle–Accenture Strategic Initiative

  - by kristin.jellison

  Hi there, partners! Oracle Engineered Systems have been getting some love lately, and we want to share it with you! The market intelligence and advisory firm IDC recently released a report lauding Oracle and Accenture’s strategic initiative to route the performance and flexibility of Oracle Engineered Systems to clients. The report, "Oracle and Accenture Strategic Alliance Places Big Bet on Engineered Systems,” by Steve White, reflects a largely positive analysis of the relationship. White notes that the alliance is “one of the largest in the industry.” Under the relationship, Accenture has incorporated Oracle Engineered Systems—including Oracle Exadata Database Machine, Oracle Exalogic Elastic Cloud, Oracle SuperCluster, and Oracle Exalytics In-Memory Machine—into its leading datacenter transformation consulting services. Together, the two companies have also created bespoke platforms, such as the Accenture Foundation Platform for Oracle, which helps clients accelerate deployments on Oracle Fusion Middleware, running Oracle Exalogic Elastic Cloud and Oracle Exadata Database Machine. Oracle Engineered Systems deliver a single, engineered platform—including server to storage and networking. This makes it easier and cheaper for Accenture clients around the world to prepare their datacenters for managing, processing and analyzing the massive amounts of data they (rightly) anticipate seeing in the next decade. The new solutions can help reduce the effort and cost to migrate any vendor database to an Oracle Engineered Systems platform, which can lower the cost of ownership by up to 50 percent. For its part, Accenture has built a team of 300 consultants to implement and increase the flexibility and stability of client datacenters. This move further expands one of the fastest-growing full-service Oracle Enterprise solutions. Over 52,000 Accenture consultants are qualified to implement, upgrade and outsource the Oracle product suite. Accenture is a Diamond-level member of Oracle PartnerNetwork (OPN). For Oracle Partners, this update should give you at least two things to walk away with. First, this initiative is showing signs of success. As Marty Cole, group chief executive for Accenture’s Technology growth platform, put it, “We are seeing an increasing number of clients recognizing the value of consolidating their databases and taking advantage of the cost and performance benefits delivered by these solutions.” The pipeline is there—and not just for Accenture. Use this example to show your clients that investments in Oracle Engineered Systems are on the rise. Second, recognize that Oracle Engineered Systems represent one of the biggest platforms for growth that Oracle has to offer partners. As part of the agreement, Accenture is able to provide: Platform Readiness Assessments Platform Implementation App Rationalization Database Rationalization Managed Services These are all enablement opportunities you can offer customers under Oracle’s partner programs —to continue building the value of their investments, and the value of your relationship with Oracle. Take a read through the IDC report. To learn more about the partnership, see this press release. Happy selling! The OPN Communications Team

  Read the article

• Normalization of database for timesheet tool and ensure data integrity

  - by fireeyedboy

  I'm creating a timesheet application. I have the following entities (amongst others): Company Employee = an employee associated with a company Client = a client associated with a company So far I have the following (abbreviated) database setup: Company - id - name Employee - id - companyId (FK to Company.id) - name Client - id - companyId (FK to Company.id) - name Now, I want an employee to be associated with a client, but only if that client is associated with the company the employee works for. How would you guarantee this data integrity on a database level? Or should I just depend on the application to guarantee this data integrity? I thought about creating a many to many table like this: EmployeeClient - employeeId (FK to Employee.id) - companyId \ (combined FK to Client.companyId, Client.id) - clientId / Thus, when I insert a client for an employee along with the employee's company id, the database should prevent this when the client is not associated with the employee's company id. Does this make sense? Because this still doesn't guarantee the employee is associated with the company. How do you deal with these things? UPDATE The scenario is as followed: A company has multiple employees. Employees will only be linked to one company. A company has multiple clients also. Clients will only be linked to one company. (Company is a sandbox, so to speak). An employee of a company can be linked to a client of it's company, but only if the client is part of the company's clientele. In other words: The application will allow a company to create/add employees and create/add clients (hence the companyId FK in the Employee and Client tables). Next, the company will be allowed to assign certain clients to certain of it's employees (EmployeeClient table). Imagine an employee working on projects for a few clients for which s/he can write billable hours, but the employee must not be allowed to write billable hours for clients they are not assigned to by their employer (the company). So, employees will not automatically have access to all their company's clients, but only to those that the company has selected for them. Hopefully this has shed some more light on the matter.

  Read the article

• network design to segregate public and staff

  - by barb

  My current setup has: a pfsense firewall with 4 NICs and potential for a 5th 1 48 port 3com switch, 1 24 port HP switch, willing to purchase more subnet 1) edge (Windows Server 2003 for vpn through routing and remote access) and subnet 2) LAN with one WS2003 domain controller/dns/wins etc., one WS2008 file server, one WS2003 running Vipre anti-virus and Time Limit Manager which controls client computer use, and about 50 pcs I am looking for a network design for separating clients and staff. I could do two totally isolated subnets, but I'm wondering if there is anything in between so that staff and clients could share some resources such as printers and anti-virus servers, staff could access client resources, but not vice versa. I guess what I'm asking is can you configure subnets and/or vlans like this: 1)edge for vpn 2)services available to all other internal networks 3)staff which can access services and clients 4)clients which can access services but not staff By access/non-access, I mean stronger separation than domain usernames and passwords.

  Read the article

• Wyse Z Class Thin Client (WES7) Image Deployment

  - by nsr81

  We are currently working on deploying a few Wyse WES7 thin clients (Z Class, exact model escapes me at the moment). We have WDM setup, and are able to see new clients show up, interact with them, pull/push images. Our current workflow is something like this: Unpack & boot up the device Disable Windows Firewall, reboot Device shows up in WDM Publish our custom image to the new device. My question is whether or not there is a way I can bypass step 2, and put my image on the client right out of the box. Either using PXE or USB boot disk, such that I can boot into some sort of menu and tell the client to pull a particular image from the WDM server. With HP thin clients, we have a rule setup which detects new clients on the network and pushes our custom image to them first time they show up. I haven't been able to figure it out with Wyse.

  Read the article

• Home networking - Wireless switch?

  - by gamers2000

  I currently have a Linksys WRT160N that has a couple wireless clients and a few wired clients. We are planning to switch from DSL to cable and unfortunately, there isn't a cable point in a location close to the wired clients (i.e. the new location of the router would be too far from the wired clients to lay Ethernet cables). Thus, I was wondering if there was a wireless switch of some sort in which it would be a standard Ethernet switch that would connect to my wireless network? (This is a home network,of course.)

  Read the article

• Load balancing and HTTPS strategies

  - by Dan

  I am faced with the following problem: Servers get saturated since current load balancing strategy is based on client IP. Some corporate clients access our servers from behind large proxies so all clients appear with same IP to our load balancer. I think we are using some hardware load balancing device (can investigate further if necessary). We need to maintain session affinity (site is constructed in ASP), so all requests with same IP get routed to the same node. Since all the communication goes over the HTTPS, no request data (like session Id) is available to balancer as a client discriminator. Is there a way to use some other data besides the IP to distinguish between clients and route the clients even when coming from same IP to different nodes? Note: I need to maintain the traffic between the balancer and nodes safe (encrypted).

  Read the article

• Exchange 2010 OWA with Client Certificates

  - by Christian

  I have enabled Client Certificate Authentication for Exchange 2010 through IIS7 and the users are prompted to choose their User Certificate when they log in, but they are all then presented with the following error message Request Url: https://<domain_name>:443/owa/ User host address: <server_ip_address> OWA version: 14.1.355.2 Exception Exception type: System.NullReferenceException Exception message: Object reference not set to an instance of an object. Call stack Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.GetUserIdentities(OwaContext owaContext, OwaIdentity& logonIdentity, OwaIdentity& mailboxIdentity, Boolean& isExplicitLogon, Boolean& isAlternateMailbox, ExchangePrincipal& logonExchangePrincipal) Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.InternalDispatchRequest(OwaContext owaContext) Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.DispatchRequest(OwaContext owaContext) Microsoft.Exchange.Clients.Owa.Core.OwaRequestEventInspector.OnPostAuthorizeRequest(Object sender, EventArgs e) System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) The method I followed to enable Certificate authentiaction was from this post: http://www.miru.ch/2011/04/how-to-enable-certificate-based-authentication-on-exchange-2010/ Any ideas? Google isn't being very helpful

  Read the article

• chrooting php-fpm with nginx

  - by dragonmantank

  I'm setting up a new server with PHP 5.3.9 and nginx, so I compiled PHP with the php-fpm SAPI options. By itself it works great using the following server entry in nginx: server { listen 80; server_name domain.com www.domain.com; root /var/www/clients/domain.com/www/public; index index.php; log_format gzip '$remote_addr - $remote_user [$time_local] "$request" $status $bytes_sent "$http_referer" "$http_user_agent" "$gzip_ratio"'; access_log /var/www/clients/domain.com/logs/www-access.log; error_log /var/www/clients/domain.com/logs/www-error.log error; location ~\.php$ { fastcgi_pass 127.0.0.1:9001; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/clients/domain.com/www/public$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; include /etc/nginx/fastcgi_params; } } It servers my PHP files just fine. For added security I wanted to chroot my FPM instance, so I added the following lines to my conf file for this FPM instance: # FPM config chroot = /var/www/clients/domain.com and changed the nginx config: #nginx config for chroot location ~\.php$ { fastcgi_pass 127.0.0.1:9001; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME www/public$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; include /etc/nginx/fastcgi_params; } With those changes, nginx gives me a File not found message for any PHP scripts. Looking in the error log I can see that it's prepending the root path to my DOCUMENT_ROOT variable that's passed to fastcgi, so I tried to override it in the location block like this: fastcgi_param DOCUMENT_ROOT /www/public/; fastcgi_param SCRIPT_FILENAME $fastcgi_script_name; but I still get the same error, and the debug log shows the full, unchrooted path being sent to PHP-FPM. What am I missing to get this to work?

  Read the article

• Windows 2003 DNS updates from ISC DHCP server

  - by wolfgangsz

  We have a very mixed network, with most clients being Debian Lenny, the rest Windows XP/Vista/7. The network itself is split into two segments (for technical reasons) called "corporate" and "engineering". On the "corporate" side all clients get their IP addresses from a Windows DHCP server and the dynamic updates into the Windows DNS work just fine. On the "engineering" side, clients get their IP addresses from a linux machine running the standard ISC DHCP server. Although this server is configured to do dynamic DNS updates, they actually don't work. Anybody got any advice on how to fix this? Please note: dynamic updates from the clients directly into the DNS would work, but are not an option for us. So this is strictly on how make this work from an ISC DHCP server to a Windows DNS server.

  Read the article

• Secondary DHCP server won't start on Centos 6.2

  - by Slowjoe

  I'm trying to create a backup DHCP server. Server times are in sync. Primary server starts fine. Secondary server won't start. Error from /var/log/messages is: Sep 15 14:47:45 stream dhcpd: Copyright 2004-2010 Internet Systems Consortium. Sep 15 14:47:45 stream dhcpd: All rights reserved. Sep 15 14:47:45 stream dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 25: invalid statement in peer declaration Sep 15 14:47:45 stream dhcpd: #011max-response-default Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 41: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 49: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: WARNING: Host declarations are global. They are not limited to the scope you declared them in. Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 70: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 78: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: Configuration file errors encountered -- exiting Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: This version of ISC DHCP is based on the release available Sep 15 14:47:45 stream dhcpd: on ftp.isc.org. Features have been added and other changes Sep 15 14:47:45 stream dhcpd: have been made to the base software release in order to make Sep 15 14:47:45 stream dhcpd: it work better with this distribution. Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: Please report for this software via the CentOS Bugs Database: Sep 15 14:47:45 stream dhcpd: http://bugs.centos.org/ Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: exiting. Config file contents: # DHCP Server Configuration file. # see /usr/share/doc/dhcp*/dhcpd.conf.sample # see 'man 5 dhcpd.conf' # option domain-name "eng.foo.com"; option domain-name-servers ns0.eng.foo.com, ns1.eng.foo.com; option ntp-servers ntp.eng.foo.com; #option time-servers ntp.eng.foo.com; default-lease-time 3600; max-lease-time 7200; authoritative; log-facility local7; failover peer "dhcp-failover" { secondary; address 10.0.1.70; port 647; peer address 10.0.1.11; peer port 647; max-response-default 30; max-unacked-updates 10; load balance max seconds 3; } # # Management subnet # subnet 10.0.0.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; option broadcast-address 10.0.0.255; option routers 10.0.0.1; option domain-search "eng.foo.com", "foo.com"; # Unknown clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 300; range 10.0.0.240 10.0.0.249; allow unknown-clients; } # Known clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 28800; range 10.0.0.150 10.0.0.199; deny unknown-clients; } include "/etc/dhcp/dhcpd.conf-engmgmt"; } # # Data subnet # subnet 10.0.1.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; option broadcast-address 10.0.1.255; option routers 10.0.1.1; option domain-search "eng.foo.com", "foo.com"; # Unknown clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 300; range 10.0.1.240 10.0.1.249; allow unknown-clients; } # Known clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 28800; range 10.0.1.150 10.0.1.199; deny unknown-clients; } # For centos network installs if substring (option vendor-class-identifier, 0, 8) = "anaconda" { filename "/autohome/distro/ks/"; next-server eng-data.eng.foo.com; } # For PXE network installs if substring (option vendor-class-identifier, 0, 9) = "PXEClient" { filename "pxelinux.0"; next-server eng-data.eng.foo.com; } # For KVM PXE network installs if substring (option vendor-class-identifier, 0, 9) = "Etherboot" { filename "pxelinux.0"; next-server eng-data.eng.foo.com; } include "/etc/dhcp/dhcpd.conf-engdata"; }

  Read the article

• Strongswan and OpenVPN together

  - by cmorgia

  I have an host in Amazon EC2 which is configured with an OpenVPN Access Server. The only client to this server is acting as a gateway from a private network. I installed StrongSWAN 5 on the same host to allow windows 7 and iOS clients to connect using IPSEC. Both services works but what I cannot figure out is how to configure StrongSWAN to consider the OpenVPN tunnel endpoint as the only gateway available to clients. Basically I want all the traffic that comes from IPSEC clients to be entirely forwarded to the OpenVPN tunnel. The remote OpenVPN client that is exposing the private network has forwarding enabled and appropriate masquerading configured. The only missing point is to have the OpenVPN tunnel as the gateway for IPsEC clients

  Read the article

• NATing IPv4 while routing IPv6

  - by Hugo

  I've the following setup: client(s) <---> (eth0) router (eth1) <---> wan I have a static IPv4 address and a /48 IPv6 address block. I need to connect all the clients to (wan). Each client will have it's own public IPv6. Meanwhile, I need to NAT those same clients over to (wan). Everything IPv4-related and the NAT are working fine. The IPv6 communication to/from (eth0)<-(clients) works fine, as does the IPv6 communication from (eth1)<-(wan) works fine. To provide IPv6 to all my clients, I've thought of too choices: Having the router as a gateway, which different IP on each interface. This sounds like I need to tell my ISP to route the entire block through that single IP, so it's not really an option. Transparently pass IPv6 packets to/from eth0<-eth1, so all clients can communicate with the upstream gateway (I would actually have a switch here if it weren't for the need to remain IPv4 compatible). So, since I've opted for the second choice, I'm in doubt: How can I pass all IPv6 traffic from eth0 to eth1 transparently? What I need is a level 3 bridge, but linux's bridgeutils create a level 2 bridge (which would bridge ipv4 as well, and I can't have that). This is a DD-WRT device, but it's pretty much an embeded linux, so most suggestions that would work on linux are welcome. Thanks.

  Read the article

• Reverse rdesktop or VNC overlay image!

  - by carlesso

  Hi all. I've got a central server (linux based) and many clients (Windows XP Embedded, afaik) in public places around my country. I need to have these clients to connect to the server with a "reverse" tunnel, that is to say that I need to control the clients from the server but the connection is initialized by clients. The requirement is that, during the connection, an overlay image (or something like that, like a modified version of login screen) is displayed. Some stuff like "Work In Progress". My first idea was to use vncviewer -listen and vnc in reverse mode, but cannot understand how to obfuscate the work I'm doing. Other idea was to use rdesktop in "reverse" mode, but it seems it does not support it. Using rdekstop reverse seems the nicest solution (I can login back the user was in before connection, the login manager - which I can modified - is displayed), but any hint will be appreciated! Thanks in advance!

  Read the article

• Multiple Homed Windows 2008 Server / Windows 7 Client

  - by Daniel Scott

  I have a small Windows 2008 network, with some Windows 7 clients. The clients are both laptops with docking stations and I would like them to communicate with the Windows 2008 server (for filesharing) through the wired network whilst they're docked. Internet connectivity for all machines (clients and server) is via a Wireless LAN, so the wireless adapter in the Windows 7 clients stays active while they're docked. When the laptops are un-docked, it would be nice to still be able to contact the windows 2008 server for print sharing (and slower file sharing) - hence the server also being on the wireless LAN. The windows 2008 server is running Active Directory, DHCP and DNS. It controls DHCP leases on the wired network and holds the DNS records for "myserver.mycompany.local", which is what the filesharing clients connect to. Ideally I'd like the DNS records to return the wired IP first so that this is the address that the laptops will attempt initially - but there doesn't seem to be a way to do that? At present the server's IP on the wireless LAN comes out of an nslookup above the wired Lan IP. The multi-homing works perfectly - but in the wrong order! Switch on the wireless lan and ping myserver and it goes to the wireless IP. Disable the wireless on the client and do the same ping again and after a couple of seconds it starts pinging the wired address. Does anyone have any suggestions on how to make this work in a predictable order? - or even if it can work. Alternative 1? If it can't work, then would this work: Remove the wireless adapter from the server, put a wireless router/bridge on the wired network (set up to route to/from the wireless LAN's subnet), then configure the clients with two routes to the (now) single IP of the server with metrics favouring direct communication over the wired LAN first? Alternative 2? Should I instead single-home the laptops so all of their connectivity is via the wired-LAN while they're docked? (and route via the windows 2008 server - or a dedicated wireless bridge/router)? My concern here is that I'd like undocking to be seamless - and if the clients are in the middle of downloading something from the internet I wouldn't want whatever they're doing interupted as they switch IP addresses onto the Wireless network. Perhaps this isn't the case and I'm concerned over nothing? Any thoughts? :) UPDATE I seem to have cracked it (at least DNS entries come out in the order I hope for - and pinging the server with various combinations of wired, wireless and both interfaces enabled uses the IP I want) ... I set the binding order of the NICs on the Server (which is acting as Domain Controller, DHCP and DNS server) so that the Wired NIC is before the Wireless adapter. (Start -- type "Network Interfaces" -- Select "View Network Connections" -- Press Alt to show classic dropdown menus -- Advanced -- Advanced Settings) Now, an nslookup (from the client) of the server's hostname returns the Wired IP first, followed by the Wireless IP. The wired IP now seems to be used whenever it's contactable. Incidentally, the metrics on the wired and wireless routes (on the client) also favour the wired LAN (based on Windows' automatically assigned metrics) - but this was always the case, even when I was having trouble getting the wired IP to be "favoured". I'm not entirely sure if this is coincidence - or if a DNS server running on Windows, handing back IP addresses for itself does actually take the binding order of it's own network interfaces into account? It would be interesting to hear from someone who can confirm or deny that (or confirm that the binding order on the server plays a role for some other reason?)

  Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >