Search Results

Search found 716 results on 29 pages for 'gokhan nas'.

Page 23/29 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

• Does RAID 1 protect against corruption?

  - by Shaun

  Does Raid 1 protect against data corruption? For example, let's say that I am keeping all of my important files on a NAS that uses 2 disks in a RAID 1. If one hard drive has some kind of internal problem and the data becomes corrupted, does the RAID recognize this automatically and correct it using data from the other good disk? Could it even know which copy is the good one? Does RAID 5 protect against corruption? I know that RAID is not a backup solution. I am trying to figure out how to make sure that I am not backing up corrupt data!

  Read the article

• Debian Harddrive Fdisk - Same ID's and changing letters

  - by James Willson

  I am trying to create and install a debain NAS and ive been having a hard time because I am new to all of this. I used ntfs-3g in order to automount my 4 NTFS drives. I also have a partitioned harddrive which is for the OS. When I was working on it and I ran this command I got this: fdisk -l /dev/sdae1 fdisk -l | grep NTFS /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 The weird thing is, all of the NTFS harddrives listed had an ID of 7. The next time I boot up my machine, I get an error about mounting /dev/sda1 and I run this command, and get the following results: fdisk -l | grep NTFS /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 I havent plugged in any drives, so whats going on? How to I make sure that my drives are mounted with the same sdXX name every time, and is the reason for this because they dont have unique ID numbers, if so, how do I solve this?

  Read the article

• Connect to wired and wireless networks at same time, Ubuntu

  - by Gary Chambers

  Currently, I have a media PC running Ubuntu 10.04 that I am trying to connect via a wired network cable directly to a NAS box, and wirelessly to the router. This works no problem after I run sudo /etc/init.d/networking restart but I can't get both interfaces to come up on system startup. My /etc/network/interfaces file reads as follows: auto eth0 iface eth0 inet static address 10.0.1.2 netmask 255.255.254.0 broadcast 10.0.1.255 network 10.0.1.0 auto wlan2 iface wlan2 inet dhcp As I say, I know this works, because I can get it to work by restarting the network interfaces, but I can't bring them both up on system startup. Does anyone know why this might be?

  Read the article

• SAN alternative for VMWare

  - by CogitoErgoSum

  Has anyone utilized something aside from a SAN to run their VMWare images off? We are looking to drop in two HP Servers and VMWare on them and run them off a SAN. Due to the cost of SAN though our CFO and VP are wondering if there are any viable alternatives (I.e. NAS) that can effectively run a VMWare. I can't think of any off of the top of my head. IF anyone can provide one or a good article outlining why to stick to SAN that'd be great.

  Read the article

• Can I mark a folder as mountpoint-only?

  - by Collin

  I have a folder ~/nas which I usually use sshfs to mount a network drive on. Today, I didn't realize the share hadn't been mounted yet, and copied some data into it. It took me a bit to realize that I'd just copied data into my own local drive rather than the network share. Is there some way to mark in the system that this folder is supposed to be a mount point, and to not let anyone copy data into it? I tried the permissions solution here: How to only allow a program to write to a directory if it is mounted?, but if I don't have write access I also can't mount anything to it.

  Read the article

• Linksys EA3500 : use WAN port as WAN + LAN possible?

  - by Dough

  I'm waiting for deliver of a Linksys EA3500 router. I was wondering if it was possible to get the WAN port act as normal WAN port (Internet IP) + LAN switch ? My problem is that my Internet box is in a room with NAS and PC, and the router will be in another room with TV, PS3 and PC. The Internet box have a 4 port Gigabit switch so one cable will plug from there to the router's WAN in the other room. The router will get the Internet IP from the Internet box, but will it be possible to have private network through this link too ? I could have a first network between the Internet box and the router, and another network form router and devices but that will do double NAT for nothing... Thanks for reading me and your help !

  Read the article

• How to maximise performance in computers connected into LAN via Gigabit ethernet router?

  - by penyuan

  Our group is setting up a server (which might just be a NAS, but we're not sure yet), which shares files, so that it connects to all other computers in the room (about 10 of them). I am thinking just hooking all of them up via a gigabit router/switch. Is there anything I should watch out for, in terms of cables, connections, or the connection capabilities of each computer in the network? For instance, I don't want a slow computer in the LAN to slow down everyone else's connection, etc., etc. Thanks for the education.

  Read the article

• What is the safest and least expensive way to store 10 terabytes of data?

  - by Josh T

  I'm a member of a production company and we're preparing for our first feature film. We've been discussing methods of data storage to keep all of our original content safe (for as long as possible). While we understand data is never 100% safe, we'd like to find the safest solution for us. We've considered: 16TB NAS for on-site storage 4-5 2TB hard drives (cheap, but not redundant), copy original footage to drives then seal in static free bag Burn data to Blu-Ray disks (time consuming and expensive: 200 disks == $5000) Tape drive(s)? I know the least about tape drives, except the fact that they're more reliable than disks. Any experience/knowledge with this amount of data is hugely appreciated.

  Read the article

• redundant/multi-site terminal server

  - by Adam

  Hi We have a Hyper-V cluster running 5 virtual terminal servers using HA. We need to be able make this system redundant and so if this site was to fail our users could log into the backup system at another location and access their data via the terminal servers. Any ideas? We were thinking of maybe using a NAS which replicated the data to the other location in real-time(pass-through disks)? and having a similar Hyper-V cluster setup in the backup location. However we would need to create the users in both location and create a virtual mirror without the data ie applications, directories, settings etc. Is this the best way to achieve this? We have read that using Hyper-v pass through disks is a big performance de-grade.

  Read the article

• Connect to wired and wireless networks at same time, Ubuntu

  - by Gary Chambers

  Currently, I have a media PC running Ubuntu 10.04 that I am trying to connect via a wired network cable directly to a NAS box, and wirelessly to the router. This works no problem after I run sudo /etc/init.d/networking restart but I can't get both interfaces to come up on system startup. My /etc/network/interfaces file reads as follows: auto eth0 iface eth0 inet static address 10.0.1.2 netmask 255.255.254.0 broadcast 10.0.1.255 network 10.0.1.0 auto wlan2 iface wlan2 inet dhcp As I say, I know this works, because I can get it to work by restarting the network interfaces, but I can't bring them both up on system startup. Does anyone know why this might be?

  Read the article

• Should I cache the data or hit the database?

  - by JD01

  I have not worked with any caching mechanisms and was wondering what my options are in the .net world for the following scenario. We basically have a a REST Service where the user passes an ID of a Category (think folder) and this category may have lots of sub categories and each of the sub categories could have 1000 of media containers (think file reference objects) which contain information about a file that may be on a NAS or SAN server (files are videos in this case). The relationship between these categories is stored in a database together with some permission rules and meta data about the sub categories. So from a UI perspective we have a lazy loaded tree control which is driven by the user by clicking on each sub folder (think of Windows explorer). Once they come to a URL of the video file, they then can watch the video. The number of users could grow into the 1000s and the sub categories and videos could be in the 10000s as the system grows. The question is should we carry on the way it is currently working where each request hits the database or should we think about caching the data? We are on using IIS 6/7 and Asp.net.

  Read the article

• CIFS shares do not mount after upgrade to 12.10 from 12.04

  - by Mothball

  I have seen issues close to my problem but no one seems to have a definitive answer as to what is going on and why the failure occurs. I have a number of NAS devices on my home network and on a previous install of 12.04 and version prior mounting at login worked using this entry for each in fstab: //servername/sharename /media/windowsshare cifs guest,uid=1000,iocharset=utf8,codepage=cp850,cp850 0 0 Now when I use this, 12.10 reports the standard - cannot mount bad option ... blah blah... The kern log reports that the CIFS option "codepage" unknown... changed entry to "unicode" and received the same error message. There are no other error messages or log entries that would indicate another issue, but this is the statement I used for quite awhile with version 12.04 and before. Is the codepage option obsolete in 12.10/CIFS now? Is there a codepage support program that I must load? Is there some kind of helper program that is required to supports the codepage option? A current review of the man pages at samba.org does not make mention of the option "codepage". Extremely confused - any help/insight would be greatly appreciated.

  Read the article

• HP DL370 G6 expansion

  - by user72185

  Hi, we are running a HP DL370 server with 6 x 300 gb disks on RAID 5. Due to a Windows update causing our server to fail recently, we couldn't access the data. I now want to separate the data from the OS (Windows server 2008 r2) so that if anything like that happens again, we can route everyone through a separate server. I have seen these HP storageworks enclosures (msa70) and have a couple of questions: Can I just take out our 2.5 inch 10k SAS drives, install them in the new Storageworks NAS and hey presto we would be up and running? If I wanted to then add another drive (I think there are 25 bays), can I just insert a blank but identical drive and the RAID 5 would dynamically expand to incorporate the new drive. Many thanks Adrian

  Read the article

• Significant OS X Finder lag when listing directories/files

  - by Jack Sleight

  I'm experiencing some significant OS X finder lag, that seems to be purely an issue with Finder itself, and not the HD or any other part of OS X (I'll explain below). The lag only appears to be when listing directories/files, where I'm seeing up to twelve or so seconds of lag (the folder opens with a blank list and the spinner going in the bottom right). This happens with both the local SSD and network drives (connected via ethernet or wifi) Browsing both local and network drives in terminal and listing directories is instant I can actually browse files on my NAS from my phone over a 3G connection from the other side of the country faster than Finder can when connected to the local network (madness!) Can anyone help? Thanks.

  Read the article

• How can I improve performance over SMB/CIFS for an application that has poor write speeds?

  - by Jeremy

  I have a third party application that reads several large files and generates a third large file. Its performance is quite good when the generated file is stored on "local storage", i.e. either a direct attached or iSCSI-based disk. The source files that are read can be stored remotely on our NAS and accessed via SMB with little effect on performance. However, if we attempt to write the target file to any kind of SMB/CIFS share (Samba or Windows Server) the performance drops almost ten-fold. This is unacceptably slow in our case. Writing files to network shares is not otherwise slow. I can copy large files to SMB shares and get great performance - near what I would expect is possible given the disks and network in question. I have a theory that this application's problem with SMB shares has something to do with a lack of write caching over the share and perhaps lots of network roundtrips. Is this possible and is there anything that can be done about it?

  Read the article

• Oracle Database 12c Technical Trainin

  - by mseika

  Audience Database Administrators, Solutions Architects, System Engineers, Technical Consultants, Implementation and support personnel, Technical Analysts, and Developers. What We Are Announcing During his opening keynote at Oracle OpenWorld 2012, Larry Ellison previewed Oracle Database 12c - the latest generation of the database market leader and Oracle flagship product. Oracle Database 12c introduces many groundbreaking features making it the database foundation of choice for the cloud. Many years of development effort have been focused on introducing innumerable new technological innovations centered on the cloud computing platform. This training session will focus on the specific needs of our Oracle partner community and developers, and provide insight into the many features and capabilities your customers will be looking to leverage in their own environments. Topics includes: Consolidation and Cloud Strategies Deep dive into the key Database 12c Options Migrating to Oracle Database 12c Webcast Details Speaker: Sean Stacey, Director of Platform Technology Solutions.Please note that you will need to join both the Audio and Web Conferences to attend. Please plan on joining 10 minutes before the scheduled time. Region: Date & Time Audio Conference Web Conference Calendar NAS, LAD, EMEA July 28am PT (US) Duration: 1 hour US/Canada: (866) 900-7470Click for local numberIf your country is not listed, dial +1 (706) 634-7953. Local charges may applyCONFERENCE ID: 98498078 Click here to joinPassword: Oracle123 Add this session to your calendar If you have any questions, please contact: Yvonne OungSenior Manager, Channel [email protected]

  Read the article

• Windows server 2003 mapping home drive wrong

  - by Sandman2010

  hey all, first question... we have around 30 servers in an Active Directory environment with 600 student computers and 100 staff desktops with XP SP2/3, the win server 2003 has the staff home drives on a NAS and in the last few days after some server updates is now mapping home drives to the \servername\home instead of \severname\home\%username%, its simple to re map the network drive but is annoying. we dont use login script to map home drive but use a VB script for other network drives and if we add the home drive mapping to that it works, but shouldnt the profile option in users AD account map that correctly? which do you all recommend, AD profile mapping or VB Script mapping Home drives? thanks Steven

  Read the article

• Servers at remote sites vs. centralized servers?

  - by Boden

  Looking for some opinions here. We've got three physical locations and site-to-site VPN between all three. Currently we've got Windows domain controllers at each location, with roughly 50 clients at each. The domains are currently separate, and we're looking at integrating the three sites. Email (Exchange) will be located at the primary site, and RPD is already being used at the secondary branches to hit the app servers also located at the primary site. The bulk of the local user load at the other two sites is just file sharing. What would the main benefits and drawbacks be of replacing the local domain controllers with NAS devices, and only keeping the domain controller(s) at the primary site? (assuming upgrades are coming regardless) Under what circumstances would you choose one setup over the other?

  Read the article

• Connect macbook to my LAN through a VPN - best solution?

  - by LewisMc

  So I have a LAN connected via a ADSL/PPPoA, this is using a bog-standard DLink router supplied by my ISP (talktalk UK). I have a NAS within the LAN that is running FreeNAS and I want to be able to connect to it when I'm out and about. It's running an atom so it's quite low on juice consumption but I don't want to have it on all day and night so I've been waking it via a magic packet and booting it down from the web admin when I need it. So I want to connect to the LAN, I presume via a VPN, to be able to send a magic packet. But what is the best method to accomplish this, or is there an easier way? I've been looking at the cisco 857 integrated router and the Netgear prosafe 318(behind modem) but not sure If I'm on the right track with what I want to achieve as I've not much experience or knowledge with VPN's or networking (software engineering student). I have tried port forwarding but to no avail, either with magic packets or even connecting outside the LAN via DYNDNS. Thanks,

  Read the article

• Can remote LogMeIn Hamachi users access our local LAN?

  - by Kev

  Unknown to me, one of the kids has installed LogMeIn Hamachi on his PC so that he can access and play on his pal's Minecraft server, and vice versa. One of the things I did was disable the Client for Microsoft Networks and File and Printer Sharing for Microsoft Networks on the Hamachi NIC in Windows 7's Network Connections. However, my lack of fu when it comes to these types of services is leaving me feeling a little uncomfortable about him using this. Is there anything I should be worried about here? For example, can his friends access our local LAN (which has a number of NAS boxes with unsecured shares) and get up to no good?

  Read the article

• eTrayz: Replace base system with a bootstrapped Debian

  - by knoopx

  I bought an eTrayz NAS time ago. The device is more or less good but it ships with a closed-source custom linux and a bunch of broken web-apps. I wanted to replace the whole system with a raw Debian installation. I successfully bootstrapped a Lenny Debian into a chroot and I'm able to use use it. However I would like it to be the default system and to boot automatically at login. The device itself ships with a bundled 2.6.24.4 kernel. I think the kernel is on a dedicated flash memory so I would prefere not to re-flash it. What do you think is the best way to accomplish it?

  Read the article

• Wireless dropouts that only affect subset of devices

  - by jwaddell

  When watching videos streamed over WiFi from a NAS box (D-Link DNS-323) I am getting wireless dropouts. However they only appear to occur when I have left my laptop (Dell Inspiron 9300 running Windows XP SP3) running; the laptop is usually suspended if I'm not using it. The dropouts have occurred when streaming to a Netgear EVA8000 streaming device, and also to a PS3. I'm using a Netgear DG834G as the wireless modem/router. When a dropout occurs I go to the laptop and see that its wireless connection has also dropped out. The odd thing is that my wife's MacBook and my iPhone still maintain their connections. What could be causing this behaviour, and how do I go about fixing it?

  Read the article

• Anyway I can trick Carbonite into backing up an external hard drive?

  - by Brian

  I use carbonite to back up my PC (Windows XP). We were running low on disk space on our home PC (down to 15 gig) so I went out and purchased an external hard drive. However, Carbonite will not back it up. I just want the external drive to be extra disk space. From their FAQ: The current version of Carbonite backs up only the files that reside on permanent hard drives on your computer. It will not back up network drives, external drives, and NAS (network accessed storage) drives. If there are files on a remote drive that you wish to include in your Carbonite backup, you should copy the files to a folder on your local hard drive. If the files are on a shared network drive, you could install Carbonite on the computer on which the network shared drive physically exists, and back the files up directly from that computer. Check back soon for a Carbonite service plan that will allow you to back up your external drives.

  Read the article

• Migrating to LDAP

  - by Frank Brenner

  Hi Folks, I've started a new job at a house where they've got an amazingly unruly patchwork of Linux, xBSD, and OpenSolaris boxes. Every box has its own user auth using local /etc/passwd, etc. Users/Groups have differing uids/gids on each machine, and each machine has its own /home/ tree. (no central NAS /homes) My job is get get everything into an LDAP directory and use that for login auth. How do I get LDAP to deal with the differing uids/gids? Thanks.

  Read the article

• hardware: delay and distinct 'click' before hard drive access

  - by matt lohkamp

  I have a windows 7 box stashed away in my closet, containing (among other things) 2 big HDDs linked together as a mirrored volume - basically a super lazy NAS / media server. I've noticed that when that drive is accessed (whether locally, on the machine itself, or remotely, from another computer, or my xbox, for example) there's a noticeable pause, and then from the computer itself, a 'click!' noise, after which the drive is accessed; e.g. open \\computername\shared\, wait 2 seconds, hear 'click!' and then see files appear in windows explorer. Any ideas? Otherwise the drive preforms normally - is it a windows thing? a HDD-about-to-die thing? Or a "yeah that always happens, you've just never noticed it before" thing?

  Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29  | Next Page >