Search Results

Search found 17366 results on 695 pages for 'memory card'.

Page 23/695 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

• Sound card not detected in 13.04

  - by Ganessh Kumar R P

  I have a problem with my sound card. I don't have volume up or down option anywhere. In the setting -> Sound I don't have any card detected. But when I run the command sudo aplay -l, I get the following output **** List of PLAYBACK Hardware Devices **** Failed to create secure directory (/home/ganessh/.config/pulse): Permission denied card 0: MID [HDA Intel MID], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 And the command lspci -v | grep -A7 -i "audio" outputs 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at f0f20000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode]) -- 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at d3efc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 07:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 So, I assume that the drivers are properly installed but still I don't get any option in the settings or volume control. The same card used to work well back in 2010 versions(04 and 10) Any help is appreciated. Thanks

  Read the article

• Minimum percentage of free physical memory that Linux require for optimal performance

  - by csoto

  Recently, we have been getting questions about this percentage of free physical memory that OS require for optimal performance, mainly applicable to physical compute nodes. Under normal conditions you may see that at the nodes without any application running the OS take (for example) between 24 and 25 GB of memory. The Linux system reports the free memory in a different way, and most of those 25gbs (of the example) are available for user processes. IE: Mem: 99191652k total, 23785732k used, 75405920k free, 173320k buffers The MOS Doc Id. 233753.1 - "Analyzing Data Provided by '/proc/meminfo'" - explains it (section 4 - "Final Remarks"): Free Memory and Used Memory Estimating the resource usage, especially the memory consumption of processes is by far more complicated than it looks like at a first glance. The philosophy is an unused resource is a wasted resource.The kernel therefore will use as much RAM as it can to cache information from your local and remote filesystems/disks. This builds up over time as reads and writes are done on the system trying to keep the data stored in RAM as relevant as possible to the processes that have been running on your system. If there is free RAM available, more caching will be performed and thus more memory 'consumed'. However this doesn't really count as resource usage, since this cached memory is available in case some other process needs it. The cache is reclaimed, not at the time of process exit (you might start up another process soon that needs the same data), but upon demand. That said, focusing more specifically on the percentage question, apart from this memory that OS takes, how much should be the minimum free memory that must be available every node so that they operate normally? The answer is: As a rule of thumb 80% memory utilization is a good threshold, anything bigger than that should be investigated and remedied.

  Read the article

• How can I free all allocated memory at once?

  - by Tommy

  Here is what I am working with: char* qdat[][NUMTBLCOLS]; char** tdat[]; char* ptr_web_data; // Loop thru each table row of the query result set for(row_index = 0; row_index < number_rows; row_index++) { // Loop thru each column of the query result set and extract the data for(col_index = 0; col_index < number_cols; col_index++) { ptr_web_data = (char*) malloc((strlen(Data) + 1) * sizeof(char)); memcpy (ptr_web_data, column_text, strlen(column_text) + 1); qdat[row_index][web_data_index] = ptr_web_data; } } tdat[row_index] = qdat[col_index]; After the data is used, the memory allocated is released one at a time using free(). for(row_index = 0; row_index < number_rows; row_index++) { // Loop thru all columns used for(col_index = 0; col_index < SARWEBTBLCOLS; col_index++) { // Free memory block pointed to by results set array free(tdat[row_index][col_index]); } } Is there a way to release all the allocated memory at once, for this array? Thank You.

  Read the article

• Parse Credit Card input from Magnetic Stripe

  - by rockinthesixstring

  Does anyone know how to parse a credit card string input from a Magnetic Card Swiper? I tried a JavaScript parser but never got it to work. This is what the input looks like. %BNNNNNNNNNNNNNNNN^DOE/JOHN ^1210201901000101000100061000000?;NNNNNNNNNNNNNNNN=12102019010106111001? The N's are the credit card number.

  Read the article

• How to access a SIM card programatically?

  - by mawg

  Just any old GSM compatible SIM card (bonus for 3G USIM). I presume I need some hardware? Can anyone recommend something cheap for hobbyist, and something more professional? I presume that there will be full docs of an API with the h/w, so maybe this should be tagged "no-programming-related"? Sorry, if so. Any good URLs or books (I am conversant with the 3GPP standards). I'm not (black hat) hacking, don't worry, just not pleased with the likes of SIM Card Secretary, Data Doctor Recovery, etc, so would like to code my own, but might turn it commercial, or offer SIM card programming services (data recover from damaged card, etc) as a sideline.

  Read the article

• memory issue iPad 4.2 crashes

  - by Manoj Kumar

  I am developing a application which receives 600-700 KB of XML data from the server. I have to do some manipulations in that data so once received the data the memory increases to 600 KB to 2 M.B. Already view occupied 4 M.B of memory in the application. So while processing the XML data i m doing some manipulation(pre-parsing) and the memory increases to 600 K.B to 2 M.B and finally decreases to 600 K.B. due to increase in memory, application gives the memory warning. While getting memory warning i m releasing all the views in the navigation controller but it releases only 1 M.B of memory. Even though I release all the views the application is crashing. Please help me out in this issue. It happens in iPad 4.2. Thanks in advance

  Read the article

• Memory address of a variable

  - by dotnetvoyager

  Hi Everyone, Is it possible to get the memory address of a variable in C#. What I am trying to do is very simple. I want to declare variables of type Double, Float, Decimal and assign the value 1.1 to each of these variables. Then I would like to go and see how these values are represented in memory. I need to get the memory address of the variable in order to see how its stored in memory. Once I have the memory address I plan to put a break point in the code and use the Debug - Windows - Memory option in visual studio to see how the numbers are stored in memory. Cheers,

  Read the article

• What is the best credit card processing service?

  - by JerSchneid

  We're looking to add credit card payments to our system (and it needs to be fairly custom, handling variable "per use" charges each month). We would like the integration to be simple and secure (i.e. no storing of credit card data on our system). What, in your opinion, is the best credit card processing provider to offer this kind of security and flexibility. List only one provider per answer to let the voting system do it's thing.

  Read the article

• Control SQL Server CLR Reserved Memory

  - by Ryu

  I've recently enabled CLR on my 64 bit SQL Server 2005 machine for usage of about 3 procs. When I run the following query to gather some info on memory usage... select single_pages_kb+ multi_pages_kb + virtual_memory_committed_kb as TotalMemoryUsage, virtual_memory_reserved_kb from sys.dm_os_memory_clerks where type = 'MEMORYCLERK_SQLCLR' I get 129 mb MemoryUsage and 6.3 gb Virtual Memory Reserved The total memory of the machine is 21 gig. What does reserved virtual memory mean exactly and how can I control the size that is allocated? 6 gig is overkill for what we're doing and the memory would be much better utilized by the sproc cache. I'm concerned this reserved memory will cause swapping to the page file. Please help me take back control of the memory! Thanks

  Read the article

• Are memory leaks ever ok?

  - by Imbue

  Is it ever acceptable to have a memory leak in your C or C++ application? What if you allocate some memory and use it until the very last line of code in your application (for example, a global object's deconstructor)? As long as the memory consumption doesn't grow over time, is it OK to trust the OS to free your memory for you when your application terminates (on Windows, Mac, and Linux)? Would you even consider this a real memory leak if the memory was being used continuously until it was freed by the OS. What if a third party library forced this situation on you? Would refuse to use that third party library no matter how great it otherwise might be? I only see one practical disadvantage, and that is that these benign leaks will show up with memory leak detection tools as false positives.

  Read the article

• CUDA Global Memory, Where is it?

  - by gamerx

  I understand that in CUDA's memory hierachy, we have things like shared memory, texture memory, constant memory, registers and of course the global memory which we allocate using cudaMalloc(). I've been searching through whatever documentations I can find but I have yet to come across any that explicitly explains what is the global memory. I believe that the global memory allocated is on the GDDR of graphics card itself and not the RAM that is shared with the CPU since one of the documentations did state that the pointer cannot be dereferenced by the host side. Am I right?

  Read the article

• Sound card / microphone impedance mismatch

  - by axk

  First of all I'm not completely sure this is impedance mismatch, but from what I found on the Internet I believe it is. It seems to be a common problem. The question is not as much about solving the problem as about why it is happening (if I'm right about the cause of the problem, of course). I had this quiet microphone problem with several built in cards and microphones and now with a Creative Audigy SE. There's a microphone boost option which introduces a lot of noise with volume increase, but even this doesn't seem to give loud enough sound in some cases. The mic on my current headphones is very quiet with Audigy SE without the boost but is very loud and low noise with an external Sound Blaster Connect. So the question is have I just been unlucky with my sound cards and microphones or is it a common problem? And if it is a common problem why is it so difficult for the vendors to standardize on the sound card / microphone impedance? Edit: the OS is Windows (XP/7), but I don't believe it is OS-specific.

  Read the article

• Video Card needs additional mounting support

  - by Sean

  We are creating a fairly decent system with crossfire. The issue we are having is apparently the video cards are physically to heavy to be supported purely by the motherboard and case mounts. Whenever we have the case horizontal everything works fine however when we bring the case upright the computer stops working. Relevant Info: Video Cards (2) - Sapphire 5870 (http://www.newegg.com/Product/Product.aspx?Item=N82E16814102856) MotherBoard - Asus M4A79T Deluxe Case - CoolerMaster 922 HAF To me it looks as if an additional support bracket that could hold up the end of the card would be required (included with the viideo cards!!!) Does anyone have any experience with this.

  Read the article

• Dual HDMI input - HD Video Capture Card

  - by Shivan Raptor

  Any suggestion for HD video capture card? Here is my requirements: I need 2 HDMI input for 2 HD Camera the signal captured will be encoded with Adobe Live Encoder (does it support dual input sources? I do not require mixing of 2 sources) the encoding format will be H.264 (720p), then will be sent to Adobe Flash Media Interactive Server for LIVE broadcasting. http://www.blackmagic-design.com/products/intensity/ I found the one above online, but I am not sure about its performance, and it has only 1 HDMI input. If I plug 2 of them into my workstation, will it conflict with each other?

  Read the article

• Blue Screen Of Death after Graphics Card Update

  - by John Smith

  I recently installed the game watch dogs After installing it i upgraded the drivers on my graphics card AMD Radion R9 200 series via the catalyst software and since then windows has been crashing on an ad-hoc basis even when sitting idle I have recieved two different sets of errors OXOOOOOOO1 and VIDEO_SCHEDULER_INTERNAL_ERROR I am running windows 8.1 with the driver 14.4 from AMD My PC shouldnt really be having this problem as it is pretty high spec due to my work Any help would be greatly appreciated as it is driving me up the walls a bit [UPDATE 08-06-2014] I have been looking around online and have crashed the PC a few times now trying to recreate the bug I have looked into the event history viewer and gotten the following errors amdacpusrsvc acpusrsvc: IOCTL_ACPKSD_KSD_TO_USR_SVC_SET_FB_APERTURES: FAILED acpusrsvc: GfxMemServiceInitialize: FAILED amdacpusrsvc acpusrsvc: IOCTL_ACPKSD_KSD_TO_USR_SVC_SET_FB_APERTURES: FAILED amdacpusrsvc acpusrsvc: GfxMemServiceInitialize: FAILED I took some advice from the AMD forums to re-install the old drivers to see if they would work. I uninstalled the old ones first and installed directly from the CD I got the warnings below but the driver installed "successfully" The Warnings are amdacpusrsvc acpusrsvc: ConfigureFrameBufferMemory: FAILED. Hopefully this will spark something off for someone Thanks John

  Read the article

• I want to upgrade my GPU to MSI NVIDIA N630GT-MD4GD3 4 GB DDR3 Graphic card

  - by jatin singh

  Hello every body this is my first post here.. I want to know about my motherboard's PCI express version , my motherboard as I don't have 10 reputation so I am providing image link here http://i.stack.imgur.com/6PWV9.png I have PCI express slot and I want to upgrade it to MSI NVIDIA N630GT-MD4GD3 4 GB DDR3 Graphic card.. this GPU has PCI exp version 2. Here in my city,the shopkeeper said that we have to check if the PCI express of my board is compatible to that GPU but I want to purchase it from flipkart because they sell it for less money (sorry for bad English :/) I mailed to my computers company (Acer) but they didn't reply to any of my mail so my friend told me about Super User.

  Read the article

• Sound card doesn't work and yet does.

  - by Xeoncross

  I have a really weird one tonight. Today we had a LAN party and all of a sudden the sound on a couple PC's stopped working for programs like the games, windows media player, etc. However, when errors would popup (like trying to change the volume settings) you would here the default error chime. Restarting the computers you would here the logoff-login sounds and after a restart the sound would work for a bit in both games and apps and then suddenly stop. Restarting also didn't always fix the problem. I can't figure this out. If the sound card/driver didn't work then how could we hear sounds from the windows sound scheme? No sound with VLC, windows media player, youtube, games, nothing. The only thing I can figure out is that this is a bad game crashing the primary driver or some kind of weird virus these PC's might have picked up.

  Read the article

• How to configure ubuntu for lightweight low-memory usage?

  - by augustin

  I just upgraded an old, secondary computer to the latest Kubuntu (10.10). It seems the effort was a bit too much for the hardware and one 512MB memory module died. I tried to take it away, clean the connectors, put it back several times, but to no avail. Until such a time I can find a second hand DDR memory module, I am left with a meagre 256MB RAM, which is below the official requirements (384MB) to run Kubuntu/KDE. Indeed: the computer constantly swaps the memory, making everything painfully slow. Since Kubuntu is already installed and I use it on all my computers (and I want to keep KDE for when I really need it), how can I configure ubuntu to squeeze out every bit of unnecessary memory usage? This is a secondary computer but still very useful. We use it mostly for web browsing. A "lightweight" tag is missing.

  Read the article

• How to configure kubuntu for lightweight low-memory usage?

  - by augustin

  I just upgraded an old, secondary computer to the latest Kubuntu (10.10). It seems the effort was a bit too much for the hardware and one 512MB memory module died. I tried to take it away, clean the connectors, put it back several times, but to no avail. Until such a time I can find a second hand DDR memory module, I am left with a meagre 256MB RAM, which is below the official requirements (384MB) to run Kubuntu/KDE. Indeed: the computer constantly swaps the memory, making everything painfully slow. Since Kubuntu is already installed and I use it on all my computers (and I want to keep KDE for when I really need it), how can I configure Kubuntu to squeeze out every bit of unnecessary memory usage? This is a secondary computer but still very useful. We use it mostly for web browsing. A "lightweight" tag is missing.

  Read the article

• In C++ Good reasons for NOT using symmetrical memory management (i.e. new and delete)

  - by Jim G

  I try to learn C++ and programming in general. Currently I am studying open source with help of UML. Learning is my hobby and great one too. My understanding of memory allocation in C++ is that it should be symmetrical. A class is responsible for its resources. If memory is allocated using new it should be returned using delete in the same class. It is like in a library you, the class, are responsibility for the books you have borrowed and you return them then you are done. This, in my mind, makes sense. It makes memory management more manageable so to speak. So far so good. The problem is that this is not how it works in the real world. In Qt for instance, you create QtObjects with new and then hand over the ownership of the object to Qt. In other words you create QtObjects and Qt destroys them for you. Thus unsymmetrical memory management. Obviously the people behind Qt must have a good reason for doing this. It must be beneficial in some kind of way, My questions is: What is the problem with Bjarne Stroustrups idea about a symmetrical memory management contained within a class? What do you gain by splitting new and delete so you create an object and destroy it in different classes like you do in Qt. Is it common to split new and delete and why in such case, in other projects not involving Qt? Thanks for any help shedding light on this mystery!

  Read the article

• Virtual Sd-card won't transfer [migrated]

  - by Hyztname

  I have a Verizon Galaxy Nexus 32GB. I've installed AOKP on it and it has been running pretty okay with no bugs etc... But after I connected it too my Nintendo Wii I think it mounted sdcard as FAT32 itself :\ I'm receiving the following error when trying to download something from 4Shared sync app(But actually none can download or transfer anything to Virtual sdcard): XXXXX.apk: open failed: EACCES(Permission denied) I already restored my old backup wiped all data etc, nothing seems to work. Note that I can access my sd-card, i can't only transfer, take pics... basically data. PS: I showed 4sync problem because it was the only one that specify something

  Read the article

• How to access an SD card from a virtual machine?

  - by Punit Soni

  I want to format an SD card from my Linux virtual machine. I have a built-in SD card reader in my laptop. I tried using VirtualBox and VMware Player and installed Ubuntu 10.04 guest. None of them are showing the SD card reader as a device. I can access the SD card from the Windows host. I am not interested in solutions using shared folders as I want to access the SD card as hardware (it should show up in /dev). I basically want to set up the SD card for BeagleBoard, but I don't want to install physical Ubuntu in my PC.

  Read the article

• Debug unstable Apache server under Debian

  - by almo

  Since yesterday my Apache server that runs on a Debian machine runs very unstable. Sometiems my websites load and sometimes not. I think it has to do with the memory since my Apache log is full of Out of memory (allocated 262144) (tried to allocate 4480 bytes). I also attached a screenshot of the memory graph. A server restart resolves the problem temporarily. I looked at the processes that are using memory but the biggest one is MySQL with 6.5%. Where else can look for the problem? Edit: I did a free -m right after rebooting and one about 2 hours later. I think the trend is visible: root@xxx:~# free -m total used free shared buffers cached Mem: 4016 731 3284 0 80 200 -/+ buffers/cache: 449 3566 Swap: 459 0 459 root@xxx:~# free -m total used free shared buffers cached Mem: 4016 2466 1550 0 92 473 -/+ buffers/cache: 1900 2115 Swap: 459 0 459

  Read the article

• Audio card with built-in ground isolator?

  - by Dave Jarvis

  What audio cards would you recommend that eliminate hum, and hard-drive & mouse movement signal interference? Hardware components: Motherboard. Asus P5Q SE Audio. Realtek ALC 1200, 8-Channel High-Definition Audio CODEC (on board) Harddrive. WD Caviar 320 GB Mouse. Logitech Marbleman USB Mixer. Mackie d.4 Pro Amplifier. Sonance Sonamp 260 All components are plugged into the same Monster Power HDP 910 powerbar (does not help eliminate noise). I have no other components plugged in. The computer uses a Monster iCable 1000 to go from mini (on board audio) to RCA (mixer). I have moved the cable as far from other cables as possible. A ground loop isolator between the mixer and on board audio eliminates all noise. I would rather not use a ground loop isolator; an internal audio card that is Linux-compatible (Kubuntu) would be ideal. Suggestions?

  Read the article

• Running Jackd on Ubuntu for my External Firewire Sound card

  - by Asaf

  Hello, I'm running Ubuntu 10.04 and I have an external Sound card: Phonic Firefly 302. I've connected the device, installed Jackd, added the lines: @audio - rtprio 99 @audio - memlock 500000 @audio - nice -10 to /etc/security/limits.conf logged out, logged back in, ran qjackctl (sudo qjackctl to be exact), ran the settings and chose "firewire" on the driver option, pressed "Start" and that was the output: 20:10:19.450 Patchbay deactivated. 20:10:19.578 Statistics reset. 20:10:19.601 ALSA connection graph change. 20:10:19.828 ALSA connection change. 20:10:21.293 Startup script... 20:10:21.293 artsshell -q terminate sh: artsshell: not found 20:10:21.695 Startup script terminated with exit status=32512. 20:10:21.695 JACK is starting... 20:10:21.695 /usr/bin/jackd -dfirewire -r44100 -p1024 -n3 jackd 0.118.0 Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details 20:10:21.704 JACK was started with PID=22176. no message buffer overruns JACK compiled with System V SHM support. loading driver .. libffado 2.0.0 built Mar 31 2010 14:47:42 firewire ERR: Error creating FFADO streaming device cannot load driver module firewire no message buffer overruns 20:10:21.819 JACK was stopped successfully. 20:10:21.819 Post-shutdown script... 20:10:21.822 killall jackd jackd: no process found 20:10:22.230 Post-shutdown script terminated with exit status=256. 20:10:23.865 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. Error: "/tmp/kde-asaf" is owned by uid 1000 instead of uid 0.

  Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >