Search Results

Search found 20394 results on 816 pages for 'network filesystem'.

Page 23/816 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

• Server and Network Lag

  - by DanSpd

  At my home I have a server and my computer. Server has Windows Server 2008 Standart 64 bit installed and then my computer has Windows 7 64 bit installed. My home router is DIR-615 My server has a game server installed on it and basically total open connections on server are around 700. Once its around 700 server and then whole home network lags really badly. My internet connection is good and only around 600kb/s is being used out of 2mb/s (real download/upload speeds). So far I assume that my router has a connection limit and with server + my computer connections it peaks at around 1k and lags everything. Another assumption server lag comes from connection limit. On the internet I have read that standart version of server has connection limit of 700 + 10 reserved. I do not rmember where I found that information but it was on microsoft website. So I have two options. First is to upgrade my router to Netgear FVS318G-100 and second is to change connections limit on server. Any advices? Thank you

  Read the article

• Server and Network Lag

  - by DanSpd

  At my home I have a server and my computer. Server has Windows Server 2008 Standart 64 bit installed and then my computer has Windows 7 64 bit installed. My home router is DIR-615 My server has a game server installed on it and basically total open connections on server are around 700. Once its around 700 server and then whole home network lags really badly. My internet connection is good and only around 600kb/s is being used out of 2mb/s (real download/upload speeds). So far I assume that my router has a connection limit and with server + my computer connections it peaks at around 1k and lags everything. Another assumption server lag comes from connection limit. On the internet I have read that standart version of server has connection limit of 700 + 10 reserved. I do not rmember where I found that information but it was on microsoft website. So I have two options. First is to upgrade my router to Netgear FVS318G-100 and second is to change connections limit on server. Any advices? Thank you

  Read the article

• Server and Network Lag

  - by DanSpd

  At my home I have a server and my computer. Server has Windows Server 2008 Standart 64 bit installed and then my computer has Windows 7 64 bit installed. My home router is DIR-615 My server has a game server installed on it and basically total open connections on server are around 700. Once its around 700 server and then whole home network lags really badly. My internet connection is good and only around 600kb/s is being used out of 2mb/s (real download/upload speeds). So far I assume that my router has a connection limit and with server + my computer connections it peaks at around 1k and lags everything. Another assumption server lag comes from connection limit. On the internet I have read that standart version of server has connection limit of 700 + 10 reserved. I do not rmember where I found that information but it was on microsoft website. So I have two options. First is to upgrade my router to Netgear FVS318G-100 and second is to change connections limit on server. Any advices? Thank you

  Read the article

• CISCO Router configuration

  - by Acharf

  Hey, I'm looking for a course of CISCO Commandes to configure a router. Is there anyone that can help ?

  Read the article

• Network Management Cable Labeling Techniques and their alternatives [closed]

  - by Alex

  Possible Duplicate: What is the most effective solution you used to label cables? Yes i know there are a lot of howtos and already answered questions about this topic, like this one: How do you organise the cables in your racks? Currently i am searching the web for different techniques (alternatives) for labeling the cables at the server racks and/or data centers. Unfortunately i do not have any experience with labeling/documentation of network cables in a large scale. As far as I could lookup by now the current labeling techniques are coloring and a self defined print-labeling technique (numbering, text) maybe also according to a standard which are usually used. I want to know if QR, RFID (ok RFID in a data center would be stupid due to the radio frequency wouldn't it be?), Barcodes or similar (??) have already been used by some administrators or why they did not consider such techniques at all? Too complicated (with QR scanner etc..) if you are in front of the cables and want to get quick feedback for what the cable is? What alternatives are out there? Advantages/Disadvantages? Best-Practice? I would appreciate any help on this topic, thank you! Regards, Alex

  Read the article

• Microsoft Office 2003 applications crash on 'Save As' to a network mapped drive

  - by Archit Baweja

  Hey guys, so I'm not sure if it belongs on ServerFault forums so figured I'd ask here first because its a workstation/client side issue. I have a client where we have windows server 2003 setup, with windows xp professional setup on all the workstations. We've setup a 'domain' and all workstations logon to the domain (authenticated by the Windows Domain Controller), and in the logon script we map drives on to each workstation. Everything is working peachy except for one workstation, where when I open a file in excel from a mapped drive, it opens fine, but when I go to hit Save As, the Save As dialog pops and hangs up. I cannot perform any other action in excel. When I try cancel the Save As dialog, excel crashes. The mapped drive opens up fine in Windows Explorer. To further investigate this issue, I created a new blank text document on the network drive in Windows Explorer. I then opened it. Then hit save as, and the Save As dialog opened up fine and it would let me save the document. I repeated the above steps for a word document. However this time the Save As dialog hung/froze again. So I'd imagine its a Microsoft Office Issue. Any ideas?

  Read the article

• Linking to network shares from Sharepoint pages

  - by Russell C

  So the place I work decided to set up a Microsoft Sharepoint 2010 server for task management and I (as the lowly entry-level intern) have been tasked with "figuring it out." One thing that the end users really, really, really, want is the ability to link to network shares (that are readable by anyone who will be using sharepoint) from a Sharepoint web page. In order to do this, I have edited the HTML manually with several lines that look like the following: <a href="file://server/share">Server Share</a> This works (sometimes) but the link reported by Sharepoint is often wrong and editing pages that contain these links will mangle the code such that when I open it, the code no longer looks like what it did when I last hit save (breaking all those links). Obviously this is not sustainable. I've been told by coworkers that "It worked that way at the last place I worked" but I haven't found out how yet. Any ideas on how this would work or am I barking up the wrong tree? None of the knowledge searches I've done shed any light on the sitataion. Thanks for any help! -Russell P.S. It should be noted that the file option in an href tag ONLY works in IE (which is a real bummer since we mostly use Firefox).

  Read the article

• Root filesystem check fails after power failure during installation

  - by Oo Nwoye

  During the "install" phase of the upgrade there was a power failure. After when starting up again the following errors are reported: init: udevtrigger main process (420) terminated with status 1 init: udevtrigger post-stop process (428) terminated with status 1 init: udevmonitor main process (419) killed by TERM signal The disk drive for / is not ready yet or not present Continue to wait; or press S to skip mounting or M for manual recovery Pressing M gives me the following message: Root filesystem check failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and reboot the system.

  Read the article

• Adding a Second Wireless Router to an Existing Wired Network

  - by KVCrawford

  I apologize ahead of time, I know this has been asked before, but I'm still having problems...maybe you guys can help. I started out with the basic instructions from the highest-voted answer at http://serverfault.com/questions/41572/adding-a-second-wireless-router-to-my-network The new Wireless router in question is a Linksys Wireless-N Gigabit Router, Model # WRT310N Here are the steps I've taken in setting it up: Plug my laptop into LAN port #2 in the new router. Nothing else is connected at this point Configure the new router to be 192.168.1.200 (the original router is 192.168.1.1, and its DHCP clients are from 192.168.1.100-x.x.x.199) Set the internet connection on the new router to "DHCP Client" Turn off the DHCP server & NAT routing on the new router Plug in a LAN cable from the original router into the LAN port #1 on the new router (NOT the WAN port, nothing is plugged in there) Reset the new router Afterwards, I try to ping 192.168.1.1 from the laptop plugged into LAN port #2 on the new router, with no response. 192.168.1.200 garners no response either. Typing "ipconfig" tells me: Autoconfiguration IP Address: 169.254.198.113 Subnet Mask: 255.255.0.0 Default Gateway: 169.254.198.113 What's going wrong? I appreciate any help!

  Read the article

• How can I share a Windows 7 library with anonymous access without using a Homegroup?

  - by Triynko

  The "homegroup" feature is useless, because it requires a password, and therefore doesn't support anonymous, no-hassle access to shares from devices such as my Sony Bravia TV and non-Windows7 machines. So I turned off homegroup and reverted to the standard shared folders protocol. I'd like to share my Music "Library", so I can play files from my TV through the Surround Sound System, but there seems to be no option to share a library folder other than through a homegroup. I don't want to have to individually share the folders that belong to the library, because that would defeat the purposes of the library, which is to manage which folders are included in the library while also providing an easily accessible view of them all at once. Does anyone know how to share a Windows 7 library without that useless homegroup feature?

  Read the article

• How can I share a Windows 7 library with anonymous access without using a Homegroup?

  - by Triynko

  The "homegroup" feature is useless, because it requires a password, and therefore doesn't support anonymous, no-hassle access to shares from devices such as my Sony Bravia TV and non-Windows7 machines. So I turned off homegroup and reverted to the standard shared folders protocol. I'd like to share my Music "Library", so I can play files from my TV through the Surround Sound System, but there seems to be no option to share a library folder other than through a homegroup. I don't want to have to individually share the folders that belong to the library, because that would defeat the purposes of the library, which is to manage which folders are included in the library while also providing an easily accessible view of them all at once. Does anyone know how to share a Windows 7 library without that useless homegroup feature?

  Read the article

• Splitting build cross the network?

  - by Dandikas

  Is there a known solution for splitting build process cross the network machines? Use case: We are an average software development company. We own around 50 development workstations (Quad Core 2.66Ghz, 4 GB ram, 200 GB raid). No need to tell that at any single moment not every machine is loaded to the max. There are 5 to 15 projects running simultaneously at any single moment. Obviously all of them are continuously build on server, than deployed to proper environment. Single project build is taking from 3 to 15 minutes. The problem: Whenever we build 5 projects in a row the last project is going to be ready after around 25 - 50 minutes. Building in parallel does not solve the problem (build is only a part of the game, than you need to deploy, run tests etc.) YES the correct solution is to add another build server, but "That involves buying new Expensive hardware, and we already spent a lot!". Yea, right(damn them)! Anyway. What about splitting build among developers workstation? Lets say whenever we need to build project "A" we check 5 workstations and start build on all that are not overloaded. The build can be canceled by a developer if he really needs all the power of his machine as long as there is at least 1 machine that is still building. After build is finished deployment can be performed to a proper environment (hosted on some server, not on workstation :) ). The bigger the company the more this makes sense to me. Anyone tried something like this? Are there any good practices? Any helpful software?

  Read the article

• Error setting up Data Protection Manager 2010 Agents / Network "Unauthenticated" in network settings

  - by Bowsa

  I'm not sure if the two are connected but i suspect they are. Basically I'm tring to setup Data Protection Manager 2010 on a fresh install of Server 2008 R2 in a SBS 2003 domain. Everything went fine until trying to install agents across the network. Upon clicking add, i get the following error message: Unable to connect to the Active Directory Domain Services Database. Make sure that the DPM server is a member of a domain and that the controller is running. Also verify that there is network connectivity between the DPM server and the domain controller. ID: 7 As usual (worryingly) the MSDN support for 2010 products is nearly non existant, clicking the error ID simply gives a page not found error. So after 2 days of Googling and trying various fixes (DNS settings, adding permissions to AD objects, rejoining the domain and many more) I thought I'd ask here in the hope that someone out there may have had this issue before. Any help greatly appreciated! Some further info: Firewalls are disabled on the Server 2008, SBS, and client machines. Manually installing and adding the client in also fails, as the DPM server tries to contact the DC first. Edit: I tried creating a new protection group instead, and it gives a different error upon adding the machines: Following machines are not found in AD: COMPUTERNAME.COMPANYNAME.LOCAL Is there a certain directory structure it follows in AD?

  Read the article

• Un-install network printer drivers from Win7 64 Home Premium

  - by AkkA

  I recently bought a NAS device that has print server functionality through USB. The printer was already installed and fully working on another Win XP box, set up that box to see the printer over the network and it prints fine. I tried to install the printer on my Win7 laptop (64 bit, Home Premium), but got the wrong drivers somehow, or it just refuses to work. I need to completely un-install the printer drivers and start from scratch. Removing the printer (by going to the printers folder, right click and remove) does not actually un-install the drivers. It only removes the printer from active use. Even if I try to re-install new drivers it will load the old ones. I have read a few things on the net that say to load up a device snap-in or something of the sort into Computer Management, but this seems to be valid for Win7 Pro or greater, the function everyone tells you to use isnt available in Home Premium. Is there anything I can use to manage device driver files in Home Premium? I want to completely remove them from the computer.

  Read the article

• Network does not connect at boot

  - by Daniel Svozil

  I am on Ubuntu 12.04, fresh install. When I boot a machine, the boot screen says Connecting to network, later it is changed to something like Did not connect, trying for another 60s. However, the network does not connect at the boot. But I can then log in without a network connection, and if I start a network manager service manually from the terminal (sudo service network-manager start), the network is connected without any problems. Please, does anybody know where the problem could be? I don't want to wait more than two minutes every computer restart :-). I am new to Ubuntu (and also to upstart) so I am a bit lost. There is no /var/log/messages, in dmesg I found this record, though it may not be related: init: network-interface (eth1) pre-start process (492) terminated with status 1 init: network-interface (eth1) post-stop process (548) terminated with status 1 Thanks Daniel

  Read the article

• Strange network connectivity problem

  - by Marc

  Here is my network connectivity: cable modem | |(WAN) wrt54g (default gateway, 192.168.1.1) -- earth |(LAN) | Simple Switch1 | | | | | SimpleSwitch2- neptune | | | | mars mercury | |- venus | |- laptop | saturn (Windows AD DC) simpleSwitch2 was hanging off the wrt54g. I moved it to SW1 during troubleshooting. Nothing described below was any different. earth is connected via wireless to the wrt54g. I can ping from laptop to mars, neptune & mercury. I can ping from earth to venus, saturn & laptop. However, pinging mars, mercury or neptune from earth gives the following result. Pinging mars.XXX.XXX [192.168.1.105] with 32 bytes of data: Reply from 192.168.1.122: Destination host unreachable. Reply from 192.168.1.122: Destination host unreachable. Reply from 192.168.1.122: Destination host unreachable. Reply from 192.168.1.122: Destination host unreachable. Ping statistics for 192.168.1.105: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), .122 is the address of the machine from which I am pinging. earth is a Vista machine. Windows firewall is off. saturn is my DNS & DHCP server. Can anyone give me any ideas what the h*ll is going on? Clearly the topology is a factor And yes, I am a space geek.

  Read the article

• Microsoft Office 2003 applications crash on 'Save As' to a network mapped drive

  - by Archit Baweja

  Hey guys, so I'm not sure if it belongs on ServerFault forums so figured I'd ask here first because its a workstation/client side issue. I have a client where we have windows server 2003 setup, with windows xp professional setup on all the workstations. We've setup a 'domain' and all workstations logon to the domain (authenticated by the Windows Domain Controller), and in the logon script we map drives on to each workstation. Everything is working peachy except for one workstation, where when I open a file in excel from a mapped drive, it opens fine, but when I go to hit Save As, the Save As dialog pops and hangs up. I cannot perform any other action in excel. When I try cancel the Save As dialog, excel crashes. The mapped drive opens up fine in Windows Explorer. To further investigate this issue, I created a new blank text document on the network drive in Windows Explorer. I then opened it. Then hit save as, and the Save As dialog opened up fine and it would let me save the document. I repeated the above steps for a word document. However this time the Save As dialog hung/froze again. So I'd imagine its a Microsoft Office Issue. Any ideas?

  Read the article

• Mounting filesystem with special user id set

  - by qbi

  I want to mount the device /dev/sda3 to the directory /foo/bar/baz. After mounting the directory should have the uid of user johndoe. So I did: sudo -u johndoe mkdir /foo/bar/baz stat -c %U /foo/bar/baz johndoe and added the following line to my /etc/fstab: /dev/sda3 /foo/bar/baz ext4 noexec,noatime,auto,owner,nodev,nosuid,user 0 1 When I do now sudo -u johndoe mount /dev/sda3 the command stat -c %U /foo/bar/baz results in root rather than johndoe. What is the best way to mount this ext4-filesystem with uid johndoe set?

  Read the article

• Multi device BTRFS filesystem with disk of different size

  - by fokenrute

  I have an existing BTRFS filesystem composed of one 500GB disk and I just bought a 2TB disk to increase the storage capacity of my home server and I want add the new disk to the existing filesystem. From what I read, it seems like no BTRFS setup can handle disk of different sizes without wasting the difference in size between the larger and the smaller disk, but I'm new to BTRFS and I might have missed something, so is there a setup that can allow me to combine two disks in a filesystem without wasting space ?

  Read the article

• LVM Extend... not sure the filesystem

  - by Dan

  I would like to extend my LVM partition. First I did lvextend -L +100G /dev/server/home Now I still have to extend the filesystem. The tutorials tell me to use resize2fs, but that only works for ext2 and ext3. I'm not even sure what filesystem I have... fdisk /dev/server/home/ doesn't work... how do I know what kind of filesystem I have on my lvm partition?

  Read the article

• /dev/sda2 contains a filesystem with error after partitioning

  - by Private

  I just wanted to create a separate home partition on my Ubuntu 12.10 system. I booted the liveDVD, resized the sda2 partition (28gb of data resized to 30gb based on MiB [originally on a 100gb partition]) and made a new ext4 partition for the home folder. The drive is an SSD drive. I had changed the settings (noatime etc.) for SSD succesfully a week ago. On reboot I get the following error: /dev/sda2 contains a filesystem with errors Inode 74669 has an invalid extent node (blk 6881289) fsd / [953] terminated with status 4 What would you suggest me to do? If I can avoid a clean install that would save me a lot of time (I had just done all the config). I was following this HOWTO, but I did not get to changing any of the files or configs other than those with gparted. I have a (two-week old) SSD Samsung drive which is functioning just fine (other specs see bottom of this question). Other specs: 64bit 12.10, i7, 8gb ram, nvidia.

  Read the article

• Synchronize folder on network, preserving hard links

  - by Waleed Hamra

  I have few computers using Windows XP Pro. I want to synchronize/back a folder from one machine, to another one. This far, It's a simple problem, and I've used FreeFileSync for such operations, with very satisfactory results. But, this all changes when hard links come into play. Today's folder contains lots of hard links, using such backup programs will result in hard links being treated as multiple files, and copied as such, greatly increasing folder size on destination, and defeating the purpose of using all these hard links in the first place. It gets more complicated when we take into consideration the fact that network shares on Windows DON'T expose hard linking facilities, meaning that running a hard-link-aware tool like rsync using --hard-links will be of no use. So my question, how can i backup my folder to the other computer, while preserving hard links? I don't mind installing 3rd party tools to do it, as obviously, the standard windows shares approach won't work... I am guessing there might be some tool that can be installed on both machines and works in a server/client mode? anyone has any idea how to do this?

  Read the article

• Network Sniffing and Hubs

  - by Chris_K

  This will likely seem naive to the experts... but it has been on my mind lately. For years I've been using ntop and a cheap 4 port hub to sniff client networks to determine who's doing what -- and how much. Great way to see what's going on when they call and say "Geeze, the network seems really slow today." No need to bring in a managed switch (or access the existing one) and no need to configure spanning or mirroring. I just drop in the hub inline where I want to measure. Lately I noticed it is just about impossible to buy a real honest-to-goodness hub anymore. While looking for a new one, I had someone tell me that I should be sure to get a full-duplex hub or I'd only be seeing half the traffic when I monitor. Really? I've been using a crusty old Netgear DS104 all this time. No clue if it is half or FD. Have I really been understating my measurements? I'm just not bright enough about the physical layer to really know... Side note: Just ordered a Dualcomm Ethernet Switch TAP as a hub replacement. Seems like a nifty gadget. Any notes or tips about it would be welcome in the comments :-)

  Read the article

• Network card shuts down when stressed

  - by user142485

  I have a network card that functions fine with light use, but quits functioning after heavy use. I replaced it with a brand new one and still have the same issue, also updated drivers. It is a wired D-Link card. The Internet seems fine for a small amount of web browsing but when I run a bandwidth test it starts out fast and slows quickly until the card completely quits; I have a constant ping of the gateway going while I run this and it starts timing out after a couple seconds into the speed test. The card will stay on and the data light on it still flashes some but I cannot ping the gateway or anything else until the computer is rebooted. When I boot into safe mode I can browse and run the speed test fine with no problems. I am guessing that this is probably some program that is loading in regular mode but not safe mode that is causing the issue? I have very limited software (turned off av and firewall) on the computer but I am thinking that I'll just have to start eliminating start-up programs and see if that helps. This is on Windows 7 if that makes any difference. Anyone had a similar issue or have any other suggestions/ideas for narrowing down this problem?

  Read the article

• Designing a persistent asynchronous TCP protocol

  - by dogglebones

  I have got a collection of web sites that need to send time-sensitive messages to host machines all over my metro area, each on its own generally dynamic IP. Until now, I have been doing this the way of the script kiddie: Each host machine runs an (s)FTP server, or an HTTP(s) server, and correspondingly has a certain port opened up by its gateway. Each host machine runs a program that watches a certain folder and automatically opens or prints or exec()s when a new file of a given extension shows up. Dynamic IP addresses are accommodated using a dynamic DNS service. Each web site does cURL or fsockopen or whatever and communicates directly with its recipient as-needed. This approach has been suprisingly reliable, however obvious issues have come up and the situation needs to be addressed. As stated, these messages are time-sensitive and failures need to be detected within minutes of submission by end-users. What I'm doing is building a messaging protocol. It will run on a machine and connection in my control. As far as the service is concerned, there is no distinction between web site and host machine -- there is only one device sending a message to another device. So that's where I'm at right now. I've got a skeleton server and a skeleton client. They can negotiate high-quality authentication and encryption. The (TCP) connection is persistent and asynchronous, and can handle delimited (i.e., read until \r\n or whatever) as well as length-prefixed (i.e., read exactly n bytes) messages. Unless somebody gives me a better idea, I think I'll handle messages as byte arrays. So I'm looking for suggestions on how to model the protocol itself -- at the application level. I'll mostly be transferring XML and DLM type files, as well as control messages for things like "handshake" and "is so-and-so online?" and so forth. Is there anything really stupid in my train of thought? Or anything I should read about before I get started? Stuff like that -- please and thanks.

  Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >