Search Results

Search found 23762 results on 951 pages for 'network speed'.

Page 23/951 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

• Wireless Access Point - Can't ping other machines on the wireless network

  - by Surfer513

  I have a wireless access point (Netgear), and I have it setup so that it has an IP address in the current subnet (let's say 192.168.2.0, subnet mask of 255.255.255.0). The machine that it is connected to via ethernet cable has an IP in the same subnet as the AP. The machines that are connected to the AP via the wireless connection also have an IP address in the same subnet as the rest of the network (192.168.2.0). All machines can ping the access point, but they cannot ping each other. I don't totally understand why, because there is connection and all of the machines are in the same subnet. I realize this is a layer 3 device, but is there an issue because of this AP's lack of gateway capabilities? (i.e. no routing table, etc.)

  Read the article

• Removing connections to network printers that no longer exist

  - by Jeff Hardy

  I'm trying to delete some network printer connections from a Windows Server 2003 (SP2) machine because the printer shares no longer exist. Windows shows the printers' status as "Printer not found on server, unable to connect"; this is expected; the printers are now on a different server. Only one machine ever connected to the printer shares; it no longer needs to and I'd like to clean it up. However, when I try to delete the connections, I get an error message: --------------------------- Remove Printer --------------------------- Printer connection cannot be removed. Operation could not be completed. --------------------------- OK --------------------------- The "solutions" I've found online seem to be more voodoo than anything (and they still don't work!). Does anybody know how I can delete these long-gone printers?

  Read the article

• No compatible network card

  - by sbintcliffe

  Motherboard: Asus K8N-E Deluxe with onboard NIC (nVidia nForce) Secondary NIC: I've tried using a standard NIC (Device Manager displays this as D-Link DFE-538TX 10/100, but under manufacturer in the General tab of the properties in Windows it states Realtek Semiconductor Corp.) I have downloaded ESXi 4.0.0 build 208167 and cooked to disc. I've booted from it, the .TGZ modules load from the yellow and grey screen, the progress bar reaches to about 60% and like a second later the screen changes and I have the following information on screen; "No compatible network adapter found. Please consult the HCG." I've checked the HCG and found that my motherboard is listed. I also get the same message with the secondary NIC. Any ideas please?

  Read the article

• What's the best way to Notify network users of outages or maintenance

  - by Dubs

  There are times when one of our applications is down for maintenance and we'd like to let our users know about it before they start flooding our help desk with calls. What's the best way to notify our users of an event on the network? Some users are on our intranet, while others log in from the Web. Is there an application they can install to which we can send notifications messages? I'm interested to hear what others have come up with to address this requirement. Thanks!

  Read the article

• DDWRT or similar as repeater in a network.

  - by Quantumplation

  I have a friend with sever connection issues due to her wireless router being on the bottom floor of her house, and the computer being a story or two away. I have several old Linksys routers lying about, one of which is currently running DDWRT for my network. Would it be a good idea (effective) to configure one of these routers as a wireless bridge of some kind in an intermediary floor to improve her connection? Is there any specific configuration beyond the standard DDWRT setup that I would need to do? Thanks for your help. =)

  Read the article

• download speed is fast but transfer rate is slow

  - by Ieyasu Sawada

  I've just changed ISP and I'm pretty disappointed with the transfer rate. My previous connection has a download speed of 1.08 Mb/s as seen from this site: http://speedtest.net and the download transfer rate is about 100kb/s for sites that doesn't limit their bandwidth. Now my connection has about 2Mb/s download speed but the transfer rate is dancing from 20-50kb/s . I was expecting a speed much higher than this because of the download speed that I'm getting when I'm testing. The question is what's the difference between transfer rate and download speed, is it normal to have a high download speed but low transfer rate, should the download speed be proportional to the transfer rate?

  Read the article

• Server 2008 R2 .Net 4 Programs running from Network share won't work

  - by Lim

  we have several .Net Apps stored on a Network share on our old Server (Windows Server 2003). These Apps get called by Windows 7 32bit Clients and work perfectly fine. We recently wanted to upgrade our Server to Windows Server 2008 R2 and moved the Apps from the old share to our new share on the new Server. The problem started right afterwards since all of our .Net Programs won't start anymore from the new share (2008 R2). The Error that comes up is: "This application could not be started." and with a link to Microsoft: http://support.microsoft.com/kb/2715633 (This Error also shows up when i start a simple console HelloWorld from the server share created in VS2012) Does anyone have any Idea why this is not working anymore on the new Servershare? We've been searching for two days now with no result at all. Any Tips / Help / Questions appreciated :) Greetings Lim

  Read the article

• Could not Upload file in network mapped drive using asp.net/vb.net

  - by Hasan

  I have tried several times to upload file remotely to a mapped network drive, but it is raising an exception: Could not find a part of the path 'X:\test\testing.wav'. I read through various internet /blog/ Microsoft help sites, but I still don't know what is wrong. Does anyone know what is causing this problem and how I can correct it? It works fine when I am uploading to a local drive as a test. It is also working When I am running the code from the development server, but if I try with published code, then it fails. :(

  Read the article

• Testing domains on intranet/local network?

  - by meder

  This may sound like a very silly question, but how could I setup domains ( eg www.foo.com ) on my local network? I know that all a domain is, is just a name registered to a name server and that nameserver has a zone record, and in the zone record there are several records of which the A Record is the most important in dictating where the lookup goes to, which machine it should point to. I basically want to make it so that I can refer to my other computer/webserver as 'www.foo.com' and make my local sites accessible by that, mess with virtualhost records in Apache and zone records for the domain except locally so I can explore and fiddle around and learn instead of having to rely on the domains I own on a public registrar that I could only access through the internet. Once again I apologize if this is a silly question, or if I'm completely thinking backwards. Background information: My OS is Debian, I'm a novice at Linux. I've done very small edits in zone records on a Bind9 Server but that's the extent of my networking experience.

  Read the article

• Needs free/ opensource network monitoring tool for office LAN

  - by Amit Ranjan

  I know there must be a lot similar questions on SU. Let me explain my setup first. I have 4-5 PC, Laptops and Few Android Phones in my office. To get them on a network , I have a UTStarCom, WA3002G1 ADSL2+ router with a landline broadband connection which has nothing to do with any PC except the configuration settings. Broadband channel is always on, we need to switch on the router and the internet is ready for us. No Internet Connection sharing is done via any PC. I have a limited 20GB monthly plan, which is consumed in 10-20 days, depending upon the download requirements. So in the above case, i need some suggestions from you: How do I monitor my Internet Bandwidth along-with the connected systems, realtime? Any free opensource tool available? Tweaks / Changes in PC to save bandwidth as my ISP do not have any Unlimited plan. PC and Laptops are Windows XP and/Or windows 7. Either of the platform tools are welcome.

  Read the article

• WDS - Access to network share via local user

  - by Kenny Bones

  When installing Windows 7 using WDS, a local user account is used during the set up after the main image of Win7 is installed. And I've got this application that lies on the network and not the deploymentshare itself that I want to install. But logically I get no access to that share via the local user account. Is it possible to do this somehow? Or do I have to move the Share to the Deployment share? Or possibly map the share to a separate drive or something?

  Read the article

• Creating an office network and monitoring all activity without a proxy

  - by Robert

  We are setting up our office network and would like to track all the websites visited by our employees. However, we would not like to use any proxy based solutions. Our work is highly dependent on applications in which you cannot configure a proxy. Hence, the approach we would like to follow is setting up a router inside a computer (something like this : http://www.techrepublic.com/article/configure-windows-server-2003-to-act-as-a-router/5844624) This will also allow us to attach multiple ethernet cards and have redundancy in internet connectivity with complete abstraction from the user about which connection is being used. But most importantly, since all the traffic will be going through the computer (configured as a router) I assume there will be a way to run packet analysis on all the request / responses being made. For example, list all the FTP servers connected to (port 21), give a graph of all the URLs visited per day by frequency. Is there already a software which does this ? Or is it possible to build something like this ?

  Read the article

• Server hard disk read speed and client download speed, is there a connection? [closed]

  - by Mywiki Witwiki

  Ok so a client's download speed is only as fast as a server's upload speed, and vice versa. Based on the answers to this post: Does upload speed depend upon download speed of the server? In other words, the data transfer rate between the two computers is only as fast as the speed of the "bottleneck". Let's pretend the two computers are in two different networks and both have 100Mbps internet connection. Ben wants a copy of a file in Mark's computer hard disk with 30Mbps read speed. Does this mean that Ben can download the file at a speed of around 30Mbps only, despite having an internet connection faster than 30Mbps?

  Read the article

• Network connection through a wall

  - by BCS

  I have a place where I want to set up a network connection through a normal residential wall where I can't cut any holes. I don't want to just set up a wireless system. Does anyone make a device that you place on either side of a wall to hook up a connection? Preferably something that can do 100Mb full duplex and can't be eavesdropped on with common hardware? The situation is that I'm moving into a new place (that I'm renting, so I can't do any cutting) and the POP is in one room and I have all the equipment is in another room.

  Read the article

• Network shares do not mount

  - by Alex

  My network shares were mounting fine yesterday.. suddenly they are not. They were mounting fine for the last two weeks or however long since I added them. When I run sudo mount -a I get the following error: topsy@monolyth:~$ sudo mount -a mount error(12): Cannot allocate memory Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) mount error(12): Cannot allocate memory Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) mount error(12): Cannot allocate memory Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) mount error(12): Cannot allocate memory Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) topsy@monolyth:~$ I followed this guide when setting them up: http://ubuntuforums.org/showthread.php?t=288534 So I tried removing them by doing the reverse, and then rebooting, then adding them again and rebooting. Problem persists.

  Read the article

• IP Address on internet access shared over ad-hoc wifi network

  - by Jacxel

  The Situation When im staying at my girlfriends we both like to have internet access on our laptops but her accommodation don't allow wireless routers. My Question My question is if I set up an Ad-Hoc network to share the internet connection as shown here on How To Geek. Will my laptop be acting as a wireless router or will the connection all go through my laptop as one ip address so it appears to be my computer accessing the webpages etc, that my girlfriend actually is. i would be interested in knowing any additional information that could help sove this problem eg. if connectify would do what i want.

  Read the article

• Cached Network Share Credentials?

  - by Brian Wolfe

  Hi, I have an issue in Windows 7 where I get the following error message when attempting to access an admin network share on a machine in another domain: "Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again." Troubleshooting I've Done Start Run cmd net use * /DELETE Start Manage Windows Credentials Deleted all credentials I still receive the same error until I reboot my machine. After I reboot, it works fine. However, I am able to log into the admin share if I hit it by it's IP address. QUESTION My question is, is there somewhere else I should be looking for cached user credentials? Thanks, Brian

  Read the article

• A network share folder is invisible to users

  - by Myrddin Emrys

  I have a network share folder that I was recently cleaning up permissions to. I took off the four individual names from the access permissions to the folder, and added a new security group (Universal) with standard Read/Write permissions to that folder, then added those 4 people to the group. However... now nobody can see the folder. The users can see the other 9 folders in that shared drive, but the 10th is missing. I cannot see any security permission in the parent folder or in the folder itself which would cause it to be invisible to anyone, regardless of whether they have permission to open it or edit files within.

  Read the article

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• Laptop connects to other network but not to my home wireless

  - by Nilesh

  My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

  Read the article

• Ubuntu (11.10) fails to connect to wireless network

  - by Tal Galili

  I just installed ubuntu 11.10, and tried to have it connect to the internet. I use a wireless USB stick by edimax (it is called IEEE802.11b/g/n nano USB adapter or also EW-7811Un). My problem is that Ubuntu seems to be able to use the USB to see the networks around me, but when I try to connect to my network - it just keeps trying and failing. I am connected to the internet through a 300M Wireless N Router Model No. TL-WR841N / TL-WR841ND Can you please advise on how this can be resolved? Thanks!

  Read the article

• Ideas of subjects for Diplomas for students who are getting Network Engineering degree

  - by wik

  Looking for an ideas and solutions of possible problems to be used as a part of pre-diploma practice for students who getting Network Engineering degree. The important requirement: The problem must be solved by designing new device or software which incorporate(or improve) with existent device. It's could be something industry specific, particular problem, etc. Thanks. p.s. The time for writing diploma is also limited by few month here, i.e. it's will be hard to solve very complex problems, but would be nice to hear something fresh :)

  Read the article

• When browsing a specific network share remotely, Windows Explorer continuously jumps back to the parent folder

  - by Evil Pigeon

  I am accessing a specific network path on another domain. It looks something like this: \\CoputerName.OtherDomain.in\c$\Inetpub\Testing\Website\ In under 30 seconds, I am automatically jumped back to \\CoputerName.OtherDomain.in\c$\Inetpub\Testing\ In less time it then jumps back to \\CoputerName.OtherDomain.in\c$\Inetpub\ Then it jumps back to c$ for its final resting place. \\CoputerName.OtherDomain.in\c$\ At first I thought this had to with a faulty keyboard, but this behaviour also occurs when the window does not have focus. It's as if windows thinks that the folder no longer exists (as in someone else has deleted or moved it). This behaviour is not specific to my PC either, it occurs from other machines in the office. Edit: It looks like this issue only occurs from other Windows 7 machines. There are no issues accessing the path from XP.

  Read the article

• Single domain user can't install a specific shared network printer

  - by drpcken

  I have a file server serving up shared network printers. Never had any issues in the past. I have a specific domain user (just 1) that gets this error when trying to install a specific printer: You do not have sufficient access to your computer to connect to the selected printer This user can install all the other printers no problem. All my other domain users can install the printer with no problem. I've removed the driver from the local client and tried again but with the same problem. Even as an administrator I get this error. Is there something I'm missing?

  Read the article

• Can't access network share with name defined in hosts file

  - by Einar Egilsson

  I have a network share on a machine that I can only reach by IP address. I then defined an alias for the IP in my hosts file so I could use that instead of the IP but then I can't log on to the share, I just get the logon prompt again and again. So basically this: \\172.17.0.48\SomeShare works but this \\myalias\SomeShare doesn't. myalias is defined in c:\windows\system32\drivers\etc\hosts as 172.17.0.48 myalias And I can use the alias for remote desktop without problems. Can anyone tell me why this doesn't work for fileshares?

  Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >