Search Results

Search found 15499 results on 620 pages for 'non obvious'.

Page 23/620 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

  • Hyper-V causes boot loop/failure on a non-Gigabyte Win8 Pro system

    - by Nick
    Hardware: Intel i7 2600K (not overclocked, SLAT compatible, virt. features enabled in bios) Asus Maximus IV Extreme-Z (Z68) 16Gb RAM 256Gb SSD Other non-trivial working parts Adding Hyper-V is causing a boot loop resulting in an attempt at automatic repair by Windows 8 after the second or third loop: I'm trying to get the Windows Phone 8 SDK installed and I've narrowed down my troubles to the Hyper-V feature in Win8. This is required to run the WP8 emulator and there are no install options to omit this feature. My first attempt completely borked the OS as I did not have a recent restore point or system image, so I did a completely clean install and made plenty of backups/restore points. I skipped the SDK install and went straight for the windows feature add-on for Hyper-V. This confirmed that Hyper-V is the issue as the same behavior resulted. I cannot find any hint in the Event Logs. Cancelling automatic recovery causes the same behavior to repeat. I don't have any other VM products installed. My only recourse is to use a restore point, try something else, install it again, and see what happens. No luck so far. I'm on my 10th attempt here. Any help would be much appreciated. EDIT: I found a collection of tips here.. http://social.msdn.microsoft.com/Forums/en-US/wptools/thread/b06cc9f2-aa5e-4cb3-9df1-0c273e1dfd68 So i've been attempting various bios settings to resolve this issue with no luck. I've tried setting 'CPUID Limit' to disabled. This seems to work partly as Win8 boots but no USB devices work at all. I also attempted disabling the usb 3.0 controller as the msdn topic lists an issue with USB controllers on Gigabyte boards. This also doesn't work. The USB devices light up but no input is received by the OS. All of my other bios CPU settings are in line with the info in the post. I'm totally stumped. Bios screenshots: http://i.imgur.com/yKN5u.png http://i.imgur.com/Y9wI4.png http://i.imgur.com/F6EuO.png

    Read the article

  • Windows DHCP Server - get notification when a non-AD joined device gets an IP address

    - by TheCleaner
    SCENARIO To simplify this down to it's easiest example: I have a Windows 2008 R2 standard DC with the DHCP server role. It hands out IPs via various IPv4 scopes, no problem there. WHAT I'D LIKE I would like a way to create a notification/eventlog entry/similar whenever a device gets a DHCP address lease and that device IS NOT a domain joined computer in Active Directory. It doesn't matter to me whether it is custom Powershell, etc. Bottom line = I'd like a way to know when non-domain devices are on the network without using 802.1X at the moment. I know this won't account for static IP devices. I do have monitoring software that will scan the network and find devices, but it isn't quite this granular in detail. RESEARCH DONE/OPTIONS CONSIDERED I don't see any such possibilities with the built in logging. Yes, I'm aware of 802.1X and have the ability to implement it long-term at this location but we are some time away from a project like that, and while that would solve network authentication issues, this is still helpful to me outside of 802.1X goals. I've looked around for some script bits, etc. that might prove useful but the things I'm finding lead me to believe that my google-fu is failing me at the moment. I believe the below logic is sound (assuming there isn't some existing solution): Device receives DHCP address Event log entry is recorded (event ID 10 in the DHCP audit log should work (since a new lease is what I'd be most interested in, not renewals): http://technet.microsoft.com/en-us/library/dd759178.aspx) At this point a script of some kind would probably have to take over for the remaining "STEPS" below. Somehow query this DHCP log for these event ID 10's (I would love push, but I'm guessing pull is the only recourse here) Parse the query for the name of the device being assigned the new lease Query AD for the device's name IF not found in AD, send a notification email If anyone has any ideas on how to properly do this, I'd really appreciate it. I'm not looking for a "gimme the codez" but would love to know if there are alternatives to the above list or if I'm not thinking clear and another method exists for gathering this information. If you have code snippets/PS commands you'd like to share to help accomplish this, all the better.

    Read the article

  • Examples of 2D side-scrollers that achieve open non-linear feel?

    - by Milosz Falinski
    I'm working on a 2.5D platformer prototype that aims for an open feel while maintaining familiar core mechanics. Now, there's some obvious challenges with creating a non constricted feel in a spatially constricted environment. What I'm interested in, is examples of how game designers deal with the "here's a level, beat the bad guys/puzzles to get to the next level" design that seems so natural to most platformers (eg. Mario/Braid/Pid/Meat Boy to name a few). Some ideas for achieving openness I've come across include: One obvious successful example is Terraria, which achieves openness simply through complexity and flexibility of the game-system Another example that comes to mind is Cave Story. Game is non-linear, offers multiple choices and side-stories Mario, Rayman and some other 'classics' with a top-down level selection. I actually really dislike this as it never did anything for me emotionally and just seems like a bit of a lazy way to do things. Note: I've not actually had much experience with most of the 'classical' console platformers, apart from the obvious Marios/Zeldas/Metroids, since I've grown up on adventure games. By that I mean, it's entirely possible that I simply missed some games that solve the problem really well and are by some considered obvious 'classics'.

    Read the article

  • Installing vim7.2 on Solaris Sparc 2.6 as non-root

    - by Tobbe
    I'm trying to install vim to $HOME/bin by compiling the sources. ./configure --prefix=$home/bin seems to work, but when running make I get: > make Starting make in the src directory. If there are problems, cd to the src directory and run make there cd src && make first gcc -c -I. -Iproto -DHAVE_CONFIG_H -DFEAT_GUI_GTK -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/openwin/include -I/usr/sfw/include -I/usr/sfw/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -g -O2 -I/usr/openwin/include -o objects/buffer.o buffer.c In file included from buffer.c:28: vim.h:41: error: syntax error before ':' token In file included from os_unix.h:29, from vim.h:245, from buffer.c:28: /usr/include/sys/stat.h:251: error: syntax error before "blksize_t" /usr/include/sys/stat.h:255: error: syntax error before '}' token /usr/include/sys/stat.h:309: error: syntax error before "blksize_t" /usr/include/sys/stat.h:310: error: conflicting types for 'st_blocks' /usr/include/sys/stat.h:252: error: previous declaration of 'st_blocks' was here /usr/include/sys/stat.h:313: error: syntax error before '}' token In file included from /opt/local/bin/../lib/gcc/sparc-sun-solaris2.6/3.4.6/include/sys/signal.h:132, from /usr/include/signal.h:26, from os_unix.h:163, from vim.h:245, from buffer.c:28: /usr/include/sys/siginfo.h:259: error: syntax error before "ctid_t" /usr/include/sys/siginfo.h:292: error: syntax error before '}' token /usr/include/sys/siginfo.h:294: error: syntax error before '}' token /usr/include/sys/siginfo.h:390: error: syntax error before "ctid_t" /usr/include/sys/siginfo.h:398: error: conflicting types for '__fault' /usr/include/sys/siginfo.h:267: error: previous declaration of '__fault' was here /usr/include/sys/siginfo.h:404: error: conflicting types for '__file' /usr/include/sys/siginfo.h:273: error: previous declaration of '__file' was here /usr/include/sys/siginfo.h:420: error: conflicting types for '__prof' /usr/include/sys/siginfo.h:287: error: previous declaration of '__prof' was here /usr/include/sys/siginfo.h:424: error: conflicting types for '__rctl' /usr/include/sys/siginfo.h:291: error: previous declaration of '__rctl' was here /usr/include/sys/siginfo.h:426: error: syntax error before '}' token /usr/include/sys/siginfo.h:428: error: syntax error before '}' token /usr/include/sys/siginfo.h:432: error: syntax error before "k_siginfo_t" /usr/include/sys/siginfo.h:437: error: syntax error before '}' token In file included from /usr/include/signal.h:26, from os_unix.h:163, from vim.h:245, from buffer.c:28: /opt/local/bin/../lib/gcc/sparc-sun-solaris2.6/3.4.6/include/sys/signal.h:173: error: syntax error before "siginfo_t" In file included from os_unix.h:163, from vim.h:245, from buffer.c:28: /usr/include/signal.h:111: error: syntax error before "siginfo_t" /usr/include/signal.h:113: error: syntax error before "siginfo_t" buffer.c: In function `buflist_new': buffer.c:1502: error: storage size of 'st' isn't known buffer.c: In function `buflist_findname': buffer.c:1989: error: storage size of 'st' isn't known buffer.c: In function `setfname': buffer.c:2578: error: storage size of 'st' isn't known buffer.c: In function `otherfile_buf': buffer.c:2836: error: storage size of 'st' isn't known buffer.c: In function `buf_setino': buffer.c:2874: error: storage size of 'st' isn't known buffer.c: In function `buf_same_ino': buffer.c:2894: error: dereferencing pointer to incomplete type buffer.c:2895: error: dereferencing pointer to incomplete type *** Error code 1 make: Fatal error: Command failed for target `objects/buffer.o' Current working directory /home/xluntor/vim72/src *** Error code 1 make: Fatal error: Command failed for target `first' How do I fix the make errors? Or is there another way to install vim as non-root? Thanks in advance

    Read the article

  • Installing vim7 on Solaris Sparc 2.6 as non-root

    - by Tobbe
    I'm trying to install vim to $HOME/bin by compiling the sources. ./configure --prefix=$home/bin seems to work, but when running make I get: > make Starting make in the src directory. If there are problems, cd to the src directory and run make there cd src && make first gcc -c -I. -Iproto -DHAVE_CONFIG_H -DFEAT_GUI_GTK -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/openwin/include -I/usr/sfw/include -I/usr/sfw/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -g -O2 -I/usr/openwin/include -o objects/buffer.o buffer.c In file included from buffer.c:28: vim.h:41: error: syntax error before ':' token In file included from os_unix.h:29, from vim.h:245, from buffer.c:28: /usr/include/sys/stat.h:251: error: syntax error before "blksize_t" /usr/include/sys/stat.h:255: error: syntax error before '}' token /usr/include/sys/stat.h:309: error: syntax error before "blksize_t" /usr/include/sys/stat.h:310: error: conflicting types for 'st_blocks' /usr/include/sys/stat.h:252: error: previous declaration of 'st_blocks' was here /usr/include/sys/stat.h:313: error: syntax error before '}' token In file included from /opt/local/bin/../lib/gcc/sparc-sun-solaris2.6/3.4.6/include/sys/signal.h:132, from /usr/include/signal.h:26, from os_unix.h:163, from vim.h:245, from buffer.c:28: /usr/include/sys/siginfo.h:259: error: syntax error before "ctid_t" /usr/include/sys/siginfo.h:292: error: syntax error before '}' token /usr/include/sys/siginfo.h:294: error: syntax error before '}' token /usr/include/sys/siginfo.h:390: error: syntax error before "ctid_t" /usr/include/sys/siginfo.h:398: error: conflicting types for '__fault' /usr/include/sys/siginfo.h:267: error: previous declaration of '__fault' was here /usr/include/sys/siginfo.h:404: error: conflicting types for '__file' /usr/include/sys/siginfo.h:273: error: previous declaration of '__file' was here /usr/include/sys/siginfo.h:420: error: conflicting types for '__prof' /usr/include/sys/siginfo.h:287: error: previous declaration of '__prof' was here /usr/include/sys/siginfo.h:424: error: conflicting types for '__rctl' /usr/include/sys/siginfo.h:291: error: previous declaration of '__rctl' was here /usr/include/sys/siginfo.h:426: error: syntax error before '}' token /usr/include/sys/siginfo.h:428: error: syntax error before '}' token /usr/include/sys/siginfo.h:432: error: syntax error before "k_siginfo_t" /usr/include/sys/siginfo.h:437: error: syntax error before '}' token In file included from /usr/include/signal.h:26, from os_unix.h:163, from vim.h:245, from buffer.c:28: /opt/local/bin/../lib/gcc/sparc-sun-solaris2.6/3.4.6/include/sys/signal.h:173: error: syntax error before "siginfo_t" In file included from os_unix.h:163, from vim.h:245, from buffer.c:28: /usr/include/signal.h:111: error: syntax error before "siginfo_t" /usr/include/signal.h:113: error: syntax error before "siginfo_t" buffer.c: In function `buflist_new': buffer.c:1502: error: storage size of 'st' isn't known buffer.c: In function `buflist_findname': buffer.c:1989: error: storage size of 'st' isn't known buffer.c: In function `setfname': buffer.c:2578: error: storage size of 'st' isn't known buffer.c: In function `otherfile_buf': buffer.c:2836: error: storage size of 'st' isn't known buffer.c: In function `buf_setino': buffer.c:2874: error: storage size of 'st' isn't known buffer.c: In function `buf_same_ino': buffer.c:2894: error: dereferencing pointer to incomplete type buffer.c:2895: error: dereferencing pointer to incomplete type *** Error code 1 make: Fatal error: Command failed for target `objects/buffer.o' Current working directory /home/xluntor/vim72/src *** Error code 1 make: Fatal error: Command failed for target `first' How do I fix the make errors? Or is there another way to install vim as non-root? Thanks in advance

    Read the article

  • Print directly to CUPS server from non-local clients (Ubuntu 14.04)

    - by OEP
    I set up a CUPS server with a few queues and printing from local clients (the CUPS test page and Samba) seems to work just fine. It seems like the CUPS server is denying non-local clients though: 130.127.48.70 - - [03/Jun/2014:14:29:19 -0400] "POST /printers/m137 HTTP/1.1" 200 390 Validate-Job successful-ok 130.127.48.70 - - [03/Jun/2014:14:29:19 -0400] "POST /printers/m137 HTTP/1.1" 200 339 Create-Job client-error-not-authorized localhost - - [03/Jun/2014:14:40:50 -0400] "POST /printers/m137 HTTP/1.1" 200 410869 Print-Job successful-ok This makes me think I have some sort of host-based restriction in my configuration file, but I can't find it. I've even set my default policy to Allow all only to get the same log message. I'm working from a configuration file which had previously worked on an older version of CUPS, which looks quite similar to the example cupsd.conf. I could be wrong but it looks like that final <Limit All> block ought to allow the actions the logs complain about. MaxLogSize 2000000000 # Log general information in error_log - change "info" to "debug" for # troubleshooting... LogLevel info #AccessLog syslog #ErrorLog syslog #PageLog syslog # Administrator user group... SystemGroup sys root lp # Only listen for connections from the local machine. Listen 0.0.0.0:631 Listen :::631 Listen /var/run/cups/cups.sock ServerName <snipped> # Show shared printers on the local network. Browsing Off BrowseOrder allow,deny # (Change '@LOCAL' to 'ALL' if using directed broadcasts from another subnet.) BrowseAllow @LOCAL # Default authentication type, when authentication is required... DefaultAuthType Basic # Restrict access to the server... <Location /> Order allow,deny Allow all </Location> # Restrict access to the admin pages... <Location /admin> AuthType Default Require user @SYSTEM Encryption Required Order allow,deny Allow all </Location> # Restrict access to configuration files... <Location /admin/conf> AuthType Default Require user @SYSTEM Encryption Required Order allow,deny Allow all </Location> # Set the default printer/job policies... <Policy default> # Job-related operations must be done by the owner or an administrator... <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job> Require user @OWNER @SYSTEM Order deny,allow </Limit> # All administration operations require an administrator to authenticate... <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # All printer operations require a printer operator to authenticate... <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # Only the owner or an administrator can cancel or authenticate a job... <Limit Cancel-Job CUPS-Authenticate-Job> Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit All> Order allow,deny </Limit> </Policy>

    Read the article

  • Debian 5.0 (lenny) apt sources fail?

    - by Tronic
    For the past few days, I couldn't update our apt-sources on Debian 5.0 (lenny). I get the following errors. W: Failed to fetch http://ftp.debian.org/debian/dists/lenny/main/binary-amd64/Packages 404 Not Found [IP: 130.89.148.12 80] W: Failed to fetch http://ftp.debian.org/debian/dists/lenny/contrib/binary-amd64/Packages 404 Not Found [IP: 130.89.148.12 80] W: Failed to fetch http://ftp.debian.org/debian/dists/lenny/non-free/binary-amd64/Packages 404 Not Found [IP: 130.89.148.12 80] W: Failed to fetch http://ftp.debian.org/debian/dists/lenny/main/source/Sources 404 Not Found [IP: 130.89.148.12 80] W: Failed to fetch http://ftp.debian.org/debian/dists/lenny/contrib/source/Sources 404 Not Found [IP: 130.89.148.12 80] W: Failed to fetch http://ftp.debian.org/debian/dists/lenny/non-free/source/Sources 404 Not Found [IP: 130.89.148.12 80] How do I fix this problem? Edit: My current sources are: # Debian Lenny deb http://ftp.de.debian.org/debian/ lenny main non-free contrib deb-src http://ftp.de.debian.org/debian/ lenny main non-free contrib # Debian Lenny Non-US deb http://non-us.debian.org/debian-non-US lenny/non-US main contrib non-free deb-src http://non-us.debian.org/debian-non-US lenny/non-US main contrib non-free # Debian Lenny Security deb http://security.debian.org/ lenny/updates main contrib non-free

    Read the article

  • Routing audio to Bluetooth Headset (non-A2DP) on Android

    - by Jayesh
    I have a non-A2DP single ear BT headset (Plantronics 510) and would like to use it with my Android HTC Magic to listen to low quality audio like podcasts/audio books. After much googling I found that only phone call audio can be routed to the non-A2DP BT headsets. (I would like to know if you have found a ready solution to route all kinds of audio to non-A2DP BT headsets) So I figured, somehow programmatically I can channel the audio to the stream that carries phone call audio. This way I will fool the phone to carry my mp3 audio to my BT headset. I wrote following simple code. import android.content.*; import android.app.Activity; import android.os.Bundle; import android.media.*; import java.io.*; import android.util.Log; public class BTAudioActivity extends Activity { private static final String TAG = "BTAudioActivity"; private MediaPlayer mPlayer = null; private AudioManager amanager = null; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); amanager = (AudioManager) getSystemService(Context.AUDIO_SERVICE); amanager.setBluetoothScoOn(true); amanager.setMode(AudioManager.MODE_IN_CALL); mPlayer = new MediaPlayer(); try { mPlayer.setDataSource(new FileInputStream( "/sdcard/sample.mp3").getFD()); mPlayer.setAudioStreamType(AudioManager.STREAM_VOICE_CALL); mPlayer.prepare(); mPlayer.start(); } catch(Exception e) { Log.e(TAG, e.toString()); } } @Override public void onDestroy() { mPlayer.stop(); amanager.setMode(AudioManager.MODE_NORMAL); amanager.setBluetoothScoOn(false); super.onDestroy(); } } As you can see I tried combinations of various methods that I thought will fool the phone to believe my audio is a phone call: Using MediaPlayer's setAudioStreamType(STREAM_VOICE_CALL) using AudioManager's setBluetoothScoOn(true) using AudioManager's setMode(MODE_IN_CALL) But none of the above worked. If I remove the AudioManager calls in the above code, the audio plays from speaker and if I replace them as shown above then the audio stops coming from speakers, but it doesn't come through the BT headset. So this might be a partial success. I have checked that the BT headset works alright with phone calls. There must be a reason for Android not supporting this. But I can't let go of the feeling that it is not possible to programmatically reroute the audio. Any ideas? P.S. above code needs following permission <uses-permission android:name="android.permission.MODIFY_AUDIO_SETTINGS"/>

    Read the article

  • XML Parsing from Non-XML Document

    - by Neel Basu
    in a xml/non-xml File there may exist some XML Block that I need to parse and replace with some other string.. The Scenario is something like this.. Some Text <cnt:use name="abc" call="xyz"> <cnt:param name="x" value="2" /> </cnt:use> Some Text There is no guarantee that the document is a proper XML document. (there may exist some unclosed Tags. or some other common mistakes that a Stupid people can make while typing HTML). so I can't use SAX or DOM. I can't even pass it to XSLT (am I right ?). So Whats the best way to extract the <cnt:*> part from the non-xml Document. and read it then replace with something else.

    Read the article

  • How to convert binary read/write to non-binary read/write in C++

    - by Phenom
    I have some C++ code from somewhere that reads and writes data in binary format. I want to see what it's reading and writing in the file, so I want to convert it's binary read and write to non-binary read and write. Also, when I convert the binary write to non-binary write, I want it to still be able to read in the information correctly. How can this be done? The write function: int btwrite(short rrn, BTPAGE *page_ptr) { // long lseek(), addr; long addr; addr = (long) rrn * (long) PAGESIZE + HEADERSIZE; lseek(btfd, addr, 0); return (write(btfd, page_ptr, PAGESIZE)); } The read function: int btread(short rrn, BTPAGE *page_ptr) { // long lseek(), addr; long addr; addr = (long)rrn * (long)PAGESIZE + HEADERSIZE; lseek(btfd, addr, 0); return ( read(btfd, page_ptr, PAGESIZE) ); }

    Read the article

  • Non-blocking read on a stream in python.

    - by Mathieu Pagé
    Hi, I'm using the subprocess module to start a subprocess and connect to it's output stream (stdout). I want to be able to execute non-blocking reads on its stdout. Is there a way to make .readline non-bloking or to check if there is data on the stream before I invoke .readline? I'd like this to be portable or at least work under Windows and Linux. here is how I do it for now (It's blocking on the .readline if no data is avaible): p = subprocess.Popen('myprogram.exe', stdout = subprocess.PIPE) str = p.stdout.readline() Thanks for your help.

    Read the article

  • Parsing concatenated, non-delimited XML messages from TCP-stream using C#

    - by thaller
    I am trying to parse XML messages which are send to my C# application over TCP. Unfortunately, the protocol can not be changed and the XML messages are not delimited and no length prefix is used. Moreover the character encoding is not fixed but each message starts with an XML declaration <?xml>. The question is, how can i read one XML message at a time, using C#. Up to now, I tried to read the data from the TCP stream into a byte array and use it through a MemoryStream. The problem is, the buffer might contain more than one XML messages or the first message may be incomplete. In these cases, I get an exception when trying to parse it with XmlReader.Read or XmlDocument.Load, but unfortunately the XmlException does not really allow me to distinguish the problem (except parsing the localized error string). I tried using XmlReader.Read and count the number of Element and EndElement nodes. That way I know when I am finished reading the first, entire XML message. However, there are several problems. If the buffer does not yet contain the entire message, how can I distinguish the XmlException from an actually invalid, non-well-formed message? In other words, if an exception is thrown before reading the first root EndElement, how can I decide whether to abort the connection with error, or to collect more bytes from the TCP stream? If no exception occurs, the XmlReader is positioned at the start of the root EndElement. Casting the XmlReader to IXmlLineInfo gives me the current LineNumber and LinePosition, however it is not straight forward to get the byte position where the EndElement really ends. In order to do that, I would have to convert the byte array into a string (with the encoding specified in the XML declaration), seek to LineNumber,LinePosition and convert that back to the byte offset. I try to do that with StreamReader.ReadLine, but the stream reader gives no public access to the current byte position. All this seams very inelegant and non robust. I wonder if you have ideas for a better solution. Thank you. EDIT: I looked around and think that the situation is as follows (I might be wrong, corrections are welcome): I found no method so that the XmlReader can continue parsing a second XML message (at least not, if the second message has an XmlDeclaration). XmlTextReader.ResetState could do something similar, but for that I would have to assume the same encoding for all messages. Therefor I could not connect the XmlReader directly to the TcpStream. After closing the XmlReader, the buffer is not positioned at the readers last position. So it is not possible to close the reader and use a new one to continue with the next message. I guess the reason for this is, that the reader could not successfully seek on every possible input stream. When XmlReader throws an exception it can not be determined whether it happened because of an premature EOF or because of a non-wellformed XML. XmlReader.EOF is not set in case of an exception. As workaround I derived my own MemoryBuffer, which returns the very last byte as a single byte. This way I know that the XmlReader was really interested in the last byte and the following exception is likely due to a truncated message (this is kinda sloppy, in that it might not detect every non-wellformed message. However, after appending more bytes to the buffer, sooner or later the error will be detected. I could cast my XmlReader to the IXmlLineInfo interface, which gives access to the LineNumber and the LinePosition of the current node. So after reading the first message I remember these positions and use it to truncate the buffer. Here comes the really sloppy part, because I have to use the character encoding to get the byte position. I am sure you could find test cases for the code below where it breaks (e.g. internal elements with mixed encoding). But up to now it worked for all my tests. The parser class follows here -- may it be useful (I know, its very far from perfect...) class XmlParser { private byte[] buffer = new byte[0]; public int Length { get { return buffer.Length; } } // Append new binary data to the internal data buffer... public XmlParser Append(byte[] buffer2) { if (buffer2 != null && buffer2.Length > 0) { // I know, its not an efficient way to do this. // The EofMemoryStream should handle a List<byte[]> ... byte[] new_buffer = new byte[buffer.Length + buffer2.Length]; buffer.CopyTo(new_buffer, 0); buffer2.CopyTo(new_buffer, buffer.Length); buffer = new_buffer; } return this; } // MemoryStream which returns the last byte of the buffer individually, // so that we know that the buffering XmlReader really locked at the last // byte of the stream. // Moreover there is an EOF marker. private class EofMemoryStream: Stream { public bool EOF { get; private set; } private MemoryStream mem_; public override bool CanSeek { get { return false; } } public override bool CanWrite { get { return false; } } public override bool CanRead { get { return true; } } public override long Length { get { return mem_.Length; } } public override long Position { get { return mem_.Position; } set { throw new NotSupportedException(); } } public override void Flush() { mem_.Flush(); } public override long Seek(long offset, SeekOrigin origin) { throw new NotSupportedException(); } public override void SetLength(long value) { throw new NotSupportedException(); } public override void Write(byte[] buffer, int offset, int count) { throw new NotSupportedException(); } public override int Read(byte[] buffer, int offset, int count) { count = Math.Min(count, Math.Max(1, (int)(Length - Position - 1))); int nread = mem_.Read(buffer, offset, count); if (nread == 0) { EOF = true; } return nread; } public EofMemoryStream(byte[] buffer) { mem_ = new MemoryStream(buffer, false); EOF = false; } protected override void Dispose(bool disposing) { mem_.Dispose(); } } // Parses the first xml message from the stream. // If the first message is not yet complete, it returns null. // If the buffer contains non-wellformed xml, it ~should~ throw an exception. // After reading an xml message, it pops the data from the byte array. public Message deserialize() { if (buffer.Length == 0) { return null; } Message message = null; Encoding encoding = Message.default_encoding; //string xml = encoding.GetString(buffer); using (EofMemoryStream sbuffer = new EofMemoryStream (buffer)) { XmlDocument xmlDocument = null; XmlReaderSettings settings = new XmlReaderSettings(); int LineNumber = -1; int LinePosition = -1; bool truncate_buffer = false; using (XmlReader xmlReader = XmlReader.Create(sbuffer, settings)) { try { // Read to the first node (skipping over some element-types. // Don't use MoveToContent here, because it would skip the // XmlDeclaration too... while (xmlReader.Read() && (xmlReader.NodeType==XmlNodeType.Whitespace || xmlReader.NodeType==XmlNodeType.Comment)) { }; // Check for XML declaration. // If the message has an XmlDeclaration, extract the encoding. switch (xmlReader.NodeType) { case XmlNodeType.XmlDeclaration: while (xmlReader.MoveToNextAttribute()) { if (xmlReader.Name == "encoding") { encoding = Encoding.GetEncoding(xmlReader.Value); } } xmlReader.MoveToContent(); xmlReader.Read(); break; } // Move to the first element. xmlReader.MoveToContent(); // Read the entire document. xmlDocument = new XmlDocument(); xmlDocument.Load(xmlReader.ReadSubtree()); } catch (XmlException e) { // The parsing of the xml failed. If the XmlReader did // not yet look at the last byte, it is assumed that the // XML is invalid and the exception is re-thrown. if (sbuffer.EOF) { return null; } throw e; } { // Try to serialize an internal data structure using XmlSerializer. Type type = null; try { type = Type.GetType("my.namespace." + xmlDocument.DocumentElement.Name); } catch (Exception e) { // No specialized data container for this class found... } if (type == null) { message = new Message(); } else { // TODO: reuse the serializer... System.Xml.Serialization.XmlSerializer ser = new System.Xml.Serialization.XmlSerializer(type); message = (Message)ser.Deserialize(new XmlNodeReader(xmlDocument)); } message.doc = xmlDocument; } // At this point, the first XML message was sucessfully parsed. // Remember the lineposition of the current end element. IXmlLineInfo xmlLineInfo = xmlReader as IXmlLineInfo; if (xmlLineInfo != null && xmlLineInfo.HasLineInfo()) { LineNumber = xmlLineInfo.LineNumber; LinePosition = xmlLineInfo.LinePosition; } // Try to read the rest of the buffer. // If an exception is thrown, another xml message appears. // This way the xml parser could tell us that the message is finished here. // This would be prefered as truncating the buffer using the line info is sloppy. try { while (xmlReader.Read()) { } } catch { // There comes a second message. Needs workaround for trunkating. truncate_buffer = true; } } if (truncate_buffer) { if (LineNumber < 0) { throw new Exception("LineNumber not given. Cannot truncate xml buffer"); } // Convert the buffer to a string using the encoding found before // (or the default encoding). string s = encoding.GetString(buffer); // Seek to the line. int char_index = 0; while (--LineNumber > 0) { // Recognize \r , \n , \r\n as newlines... char_index = s.IndexOfAny(new char[] {'\r', '\n'}, char_index); // char_index should not be -1 because LineNumber>0, otherwise an RangeException is // thrown, which is appropriate. char_index++; if (s[char_index-1]=='\r' && s.Length>char_index && s[char_index]=='\n') { char_index++; } } char_index += LinePosition - 1; var rgx = new System.Text.RegularExpressions.Regex(xmlDocument.DocumentElement.Name + "[ \r\n\t]*\\>"); System.Text.RegularExpressions.Match match = rgx.Match(s, char_index); if (!match.Success || match.Index != char_index) { throw new Exception("could not find EndElement to truncate the xml buffer."); } char_index += match.Value.Length; // Convert the character offset back to the byte offset (for the given encoding). int line1_boffset = encoding.GetByteCount(s.Substring(0, char_index)); // remove the bytes from the buffer. buffer = buffer.Skip(line1_boffset).ToArray(); } else { buffer = new byte[0]; } } return message; } }

    Read the article

  • Best non-development book for software developers

    - by Dima Malenko
    What is the best non software development related book that you think each software developer should read? Note, there is a similar, poll-style question here: What non-programming books should programmers read? Update: Peopleware is a great book, must read, no doubt. But it is about software development so does not count. Update: We ended up suggesting more than one book and that's great! Below is summary (with links to Amazon) of the books you should consider for your reading list. The Design of Everyday Things by Donald Norman Getting Things Done by David Allen Godel, Escher, Bach by Douglas R. Hofstadter The Goal and It's Not Luck by Eliyahu M. Goldratt Here Comes Everybody by Clay Shirky ...to be continued.

    Read the article

  • PHP SOAP client accessing server on non-standard port

    - by sims
    The service I'm trying to send requests to is accessible via a non-standard port - so not port 80. It is accessible locally via port 80. So I've tested the app locally and it works fine. But when I deploy it on the production server (not on the LAN), it fails. Once again for clarity: -dev server is on the LAN -SOAP server is on the LAN -production server is on the WAN -SOAP server is accessible through the NAT/FW via a non-standard http port (not 80) The soap client is created with the specified WSDL URI. For example: $this->client = new Zend_Soap_Client('http://server.com:10080/path/service.asmx?WSDL'); But queries to not work: $this->client->function($query); I get an: Internal Server Error Exception thrown. Is PHP broken in this regard? Is there a workaround?

    Read the article

  • Call a non static methode in a static SQLiteDatabase class

    - by Fevos
    i want to display a msg to the user (msg box or Toast) when exception happend in a static SQLite Database class that i use. the proplem is that i cant call a non static methode in a static class , how can i handle this. this is the class private static SQLiteDatabase getDatabase(Context aContext) { and i want to add something like this in the class when exception happen but context genertae the problem of reference to non static in static class. Context context = getApplicationContext(); CharSequence text = "Hello toast!"; int duration = Toast.LENGTH_SHORT; Toast toast = Toast.makeText(context, text, duration); toast.show();

    Read the article

  • Red-Black trees - Erasing a node with two non-leaf children

    - by SalamiArmi
    Hi all, I've been implementing my own version of a red-black tree, mostly basing my algorithms from Wikipedia (http://en.wikipedia.org/wiki/Red-black_tree). Its fairly concise for the most part, but there's one part that I would like clarification on. When erasing a node from the tree that has 2 non-leaf (non-NULL) children, it says to move either side's children into the deletable node, and remove that child. I'm a little confused as to which side to remove from, based on that. Do I pick the side randomly, do I alternate betweek sides, or do I stick to the same side for every future deletion?

    Read the article

  • Eclipse warning: "<methodName> has non-API return type <parameterizedType>"

    - by Tenner
    My co-worker and I have come across this warning message a couple times recently. For the below code: package com.mycompany.product.data; import com.mycompany.product.dao.GenericDAO; public abstract class EntityBean { public abstract GenericDAO<Object, Long> getDAO(); // ^^^^^^ <-- WARNING OCCURS HERE } the warning appears in the listed spot as EntityBean.getDAO() has non-API return type GenericDAO<T, ID> A Google search for "has non-API return type" only shows instances where this message appears in problem lists. I.e., there's no public explanation for it. What does this mean? We can create a usage problem filter in Eclipse to make the message go away, but we don't want to do this if our usage is a legitimate problem. Thanks!

    Read the article

  • non-class rvalues always have cv-unqualified types

    - by FredOverflow
    §3.10 section 9 says "non-class rvalues always have cv-unqualified types". That made me wonder... int foo() { return 5; } const int bar() { return 5; } void pass_int(int&& i) { std::cout << "rvalue\n"; } void pass_int(const int&& i) { std::cout << "const rvalue\n"; } int main() { pass_int(foo()); // prints "rvalue" pass_int(bar()); // prints "const rvalue" } According to the standard, there is no such thing as a const rvalue for non-class types, yet bar() prefers to bind to const int&&. Is this a compiler bug? EDIT: Apparently, this is also a const rvalue :)

    Read the article

  • Can HTTP URIs have non-ASCII characters?

    - by Cheeso
    I tried to find this in the relevant RFC, IETF RFC 3986, but couldn't figure it. Do URIs for HTTP allow Unicode, or non-ASCII of any kind? Can you please cite the section and the RFC that supports your answer. NB: For those who might think this is not programming related - it is. It's related to an ISAPI filter I'm building. Addendum I've read section 2.5 of RFC 3986. But RFC 2616, which I believe is the current HTTP protocol, predates 3986, and for that reason I'd suppose it cannot be compliant with 3986. Furthermore, even if or when the HTTP RFC is updated, there still will be the issue of rationalization - in other words, does an HTTP URI support ALL of the RFC3986 provisos, including whatever is appropriate to include non US-ASCII characters?

    Read the article

  • Passing Activity to non-activity object properly

    - by rayman
    In my app ive got a non-activity object which it's role is being a manager class. many times i need to pass "source activity" to methods as parameter to that manager class in order to make some operations on that activity. for exaple let's assume we have MyActivity which gotta do some toast. so i have this manager class called MyManager, and i have this method in it raiseToast(Activity sourceActivity) { Toast.makeText(sourceActivity, demo, Toast.LENGTH_LONG).show(); } and from Myactivity class we calling that method this way: MyManager manager=new MyManager(); manager.raitetoast(MyActivity.this); it works fine. what I'm asking here, is this a proper way to pass an Activity as parameter to a non-activity object? I'm having a memory leaks on real device(not the emulator), I wonder if this could also causing any reason for that? Thanks Idan.

    Read the article

  • Passing a non-iterable to list.extend ()

    - by JS
    Hello, I am creating a public method to allow callers to write values to a device, call it write_vals() for example. Since these values will by typed live, I would like to simplify the user's life by allowing them type in either a list or a single value, depending on how many values they need to write. For example: write_to_device([1,2,3]) or write_to_device(1) My function would like to work with a flat list, so I tried to be clever and code something like this: input_list = [] input_list.extend( input_val ) This works swimmingly when the user inputs a list, but fails miserably when the user inputs a single integer: TypeError: 'int' object is not iterable Using list.append() would create a nested list when a list was passed in, which would be an additional hassle to flatten. Checking the type of the object passed in seems clumsy and non-pythonic and wishing that list.extend() would accept non-iterables has gotten me nowhere. So has trying a variety of other coding methods. Suggestions (coding-related only, please) would be greatly appreciated.

    Read the article

  • How to print non-ASCII characters in Python

    - by Roman
    I have a problem when I'm printing (or writing to a file) the non-ASCII characters in Python. I've resolved it by overriding the str method in my own objects, and making "x.encode('utf-8')" inside it, where x is a property inside the object. But, if I receive a third-party object, and I make "str(object)", and this object has a non-ASCII character inside, it will fail. So the question is: is there any way to tell the str method that the object has an UTF-8 codification, generically? I'm working with Python 2.5.4.

    Read the article

  • How to make Spring accept non-void setters?

    - by Chris
    Hi, I have an API which I am turning into an internal DSL. As such, most methods in my PoJos return a reference to this so that I can chain methods together declaratively as such (syntactic sugar). myComponent .setID("MyId") .setProperty("One","1") .setProperty("Two","2") .setAssociation(anotherComponent) .execute(); My API does not depend on Spring but I wish to make it 'Spring-Friendly' by being PoJo friendly with zero argument constructors, getters and setters. The problem is that Spring seems to not detect my setter methods when I have a non-void return type. The return type of this is very convenient when chaining together my commands so I don't want to destroy my programmatic API just be to compatible with Spring injection. Is there a setting in Spring to allow me to use non-void setters? Chris

    Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >