Search Results

Search found 1073 results on 43 pages for 'transport'.

Page 23/43 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

  • Steps to make sure network is not blacklisted...Again

    - by msindle
    I have an interesting issue. I have a client that just got blacklisted due to spam being sent out over the last 2 days. I have my firewall configured to only allow mail to go outbound on port 25 from our mail server (Exchange 2010) exclusively and I have verified that there are no open relay's on our transport rules. We are running Vipre Business and after running deep scans with updated definitions all computers come back clean. I ran a message tracking report on our Exchange server that shows all mail sent via the mail server over the last couple of weeks and didn't see anything malicious or out of the ordinary. I have also verified that there are no home devices or rouge computers on the network. For all practical purposes it appears that the network is clean, but we still wound up on 5 or 6 blacklists...Where should I start looking next? Is there a "best practices" guide that can help eradicate this issue? Thanks in advance! msindle

    Read the article

  • Offset AND incremental backup

    - by Pyrolistical
    I already do backups from my main computer to my server computer using synctoy. But now I also want to do off-site backup. My idea so far: have source hard drive (we'll call S) at home have backup hard drive at work called B have transport hard drive called T connect T at work and record index of files on B take T home and check index of S and note new/changed/deleted files and copy changed files to T take T to work and update S repeat Its basically a sneakernet and using all of the advantages of it. High bandwidth, low latency. Is there some software to do this, or do I have to write it myself?

    Read the article

  • How to reliably run a batch job every 5 seconds?

    - by Benjamin
    I'm building an application where the sending of all notifications (email, SMS, fax) will be asynchronous. The application will write the notifications to the database, and a batch job will read these notifications and send them with the appropriate transport. I was first reading at ways to run cron faster than the minute, and realized this was a bad idea. The batch scripts are written in PHP, and I guess that writing a proper daemon would be quite an overhead (though I'm open to any suggestion, as PHP car run indefinitely as well). What I have in mind is a solution that would: Run the PHP script every 5 seconds Check that the previous run has finished, or abort (never 2 concurrent batches running) Kill the script if live for more than x minutes (a security in case it hangs) Start with the system (if a reboot occurs) Any idea how to do this?

    Read the article

  • Postfix : relay based on sender address AND recipient address

    - by Pierre Mourlanne
    I have configured postfix to relay mails based on the recipient address. In transport I put something like this: recipientdomain.com relay:[my.relay.com] This works fine, when I send an e-mail to [email protected], it does get relayed through my.relay.com. I want to be able to use this relay only when the message comes from a specific address, say [email protected]. Two quick examples: Mail 1: from [email protected] to [email protected] - does not get relayed Mail 2: from [email protected] to [email protected] - gets relayed How can I configure Postfix to achieve this?

    Read the article

  • SFTP: How to keep data out of the DMZ

    - by ChronoFish
    We are investigating solutions to the following problem: We have external (Internet) users who need access to sensitive information. We could offer it to them via SFTP which would offer a secure transport method. However, we don't want to maintain the data on server as it would then reside in the DMZ. Is there an SFTP server that has "copy on access" such that if the box in the DMZ were to be compromised, no actual data resided on that box? I am envisioning an SFTP Proxy or SFTP passthrough. Does such a product exist currently?

    Read the article

  • Does Apache 2.2 (windows) have any default bandwidth limit?

    - by igino manfre'
    I'm running Apache on a server in cloud (Windows server 2008 R2 on VMware, 1 Gbps of BW, http://95.110.164.61 ). I'm streaming many live DVB MPEG Transport Stream, precompressed in loop, (not flash) generated by VLC on port 640xx and then reverse proxied by Apache on port 80. The server's firewall is open for VLC and Apache on all ports. Above 1.5 Mbps the reproduction is affected by continous stop & go. Please note that if you request a stream generated by VLC directly at http://95.110.164.61:64087/mpg2_6.4 you see a correct stream, while if you request http://95.110.164.61/mpg2_6.4 you do not. I know that Flash streaming Server uses Apache to stream on port 80 (and it works). I'm not an expert with Apache, can anyone tell me if any "special" module is required to increase the bandwidth?

    Read the article

  • Enabling openssl With PHP/nginx

    - by reefine
    I'm getting the following error when trying to connect to SMTP + SSL through PHP using nginx + PHP 5, Could not connect to smtp host 'ssl://smtp.gmail.com' (5) (Unable to find the socket transport "ssl" - did you forget to enable it when you configured PHP?) In phpinfo I see: OpenSSL support disabled (install ext/openssl) This leads me to believe I've installed OpenSSL incorrectly. I've read a bunch of places where I should uncomment the following line: extension = php_openssl.dll This line does not exist so I added it to the end of my php.ini to no avail. The php_openssl.dll file does not exist anywhere on my server.

    Read the article

  • ffmpeg error while segmenting

    - by Tommy Ng
    I'm using ffmpeg and segmenter on Ubuntu 10.04 to create the transport stream from flv/h264 video files and then segment the ts segments for ipad streaming. Some ts files show an error with segmenter - Output #0, mpegts, to '29': Stream #0.0: Video: 0x0000, yuv420p, 480x360, q=2-31, 90k tbn, 25 tbc Stream #0.1: Audio: 0x0000, 0 channels, s16 [mpegts @ 0x11f4ac0]sample rate not set Could not write mpegts header to first output file my ffmpeg command for creating the ts file - ffmpeg -i 1.flv -f mpegts -acodec libfaac -ar 48000 -ab 64k -s 480x360 -vcodec libx264 -b 192k -flags +loop -cmp +chroma -partitions +parti4x4+partp8x8+partb8x8 -subq 5 -trellis 1 -refs 1 -coder 0 -me_range 16 -keyint_min 25 -sc_threshold 40 -i_qfactor 0.71 -bt 200k -maxrate 192k -bufsize 192k -rc_eq 'blurCplx^(1-qComp)' -qcomp 0.6 -qmin 10 -qmax 51 -qdiff 4 -level 30 -aspect 480:360 -g 30 -async 2 -y 1.ts my segmenter command - segmenter 1.ts 10 1 1.m3u8 path/to/streams/

    Read the article

  • If an old Exchange server is not part of a domain, does that imply that it can be safely removed without affecting mailflow?

    - by Bigbio2002
    We are doing some cleanup, and there is an old Exchange VM hanging around that we want to get rid of. We do not have the local admin credentials, but we can ascertain that it is not part of the current domain. Seeing as the new production Exchange server is working fine, is it safe to power off and remove the old server? *I should probably note that this is not an Edge Transport server. There was an upgrade to Exchange 2013 at some point in the past, and there is only one functioning Exchange server now.

    Read the article

  • Exchange server listening on port 25 but clients dont recieve emails

    - by Josh R
    My exchange server is listening on port 25, that is I can telnet into it and send an email but Outlook 2010/2007, OWA, and ActiveSync are not pulling down emails. Outlook 2010 specifically says Connected To Exchange Server and Updating Inbox but it never updates the inbox. Also, OWA shows some of the newer mail messages, but when I double click on one to open it up in OWA, it times out. Any idea what could be causing this? Also Exchange Transport and Information Store are started. Thanks!

    Read the article

  • no internet mail group / mail sending and delivery restrictions

    - by Jeff
    I run a win 2k8 a/d server and an win 2k8 exchange 07 server I have a group called 'No Internet Mail', i made it a distribution group. I tried to setup a transport rule on the exchange server that is configured as follows for outgoing: from a member of no internet mail and sent to users outside the organization redirect the message to administrator and send message refused, forwarded to administrator. Please talk to management for external email use. however , when i enable this it forwards everyones emails to me regardless if they are a member of the no internet mail group or not. not sure what im doing wrong, thanks in advanced.

    Read the article

  • Run totally silent rsync?

    - by jackr
    I have a cronjob that runs hourly, and is totally silent unless something goes wrong. Well ... almost ... A part of the job is rsync --del -Cacqrz public/. [email protected]:/target/path This always prints "logged in". How can I make it stop? (Short of 'grep -v' ;-) I don't get the "logged in" message if I do things like ssh [email protected] ls The transport is, of course, ssh (using keys). Source host is either OSX or Ubuntu (tried both, same behavior). Target host is Linux of some flavor.

    Read the article

  • Automatic Reply Out of Hours

    - by Inbr3d
    Is there a way i can use a rule or "timer" of some sort to turn on out of office, or enable an auto reply for 1 mailbox (Sales mailbox) within a time period. Reason: We deal with all timezones, we only open 6am-8pm. critical sales are sometimes lost the automatic reply will involve a telephone number for emergency sales. (yes, spam i know) I wish the auto reply to come from "[email protected]" if this is possible. I've lokekd at transport rules, cant see anything. I cant word my question well enough for google to give an answer.

    Read the article

  • Role of OSI layers when we open a url in browser?

    - by user2715898
    I have searched on this topic a lot but I am not able to understand how and where OSI layers (Application, Presentation, Session, Transport, Network, Datalink, Physical) come into picture in the whole process of opening a webpage in browser. I have read this - http://stackoverflow.com/questions/2092527/what-happens-when-you-type-in-a-url-in-browser?lq=1 and I know all the functions of all the layers that are there in OSI model. Also, do we use OSI model or TCP/IP in the whole process? Basically I am having problem linking all the things together. And please forgive me if there are resources out there that explain this concept. You can definitely point to them.

    Read the article

  • WCF on Windows Phone 7 (Silverlight 4)

    - by Igor Zevaka
    Has anyone been able to communicate using WCF on Windows Phone Series 7 emulator? I've been trying for the past two days and it's just happening for me. I can get a normal Silverlight control to work in both Silverlight 3 and Silverlight 4, but not the phone version. Here are two versions that I've tried: Version 1 - Using Async Pattern BasicHttpBinding basicHttpBinding = new BasicHttpBinding(); EndpointAddress endpointAddress = new EndpointAddress("http://localhost/wcf/Authentication.svc"); Wcf.IAuthentication auth1 = new ChannelFactory<Wcf.IAuthentication>(basicHttpBinding, endpointAddress).CreateChannel(endpointAddress); AsyncCallback callback = (result) => { Action<string> write = (str) => { this.Dispatcher.BeginInvoke(delegate { //Display something }); }; try { Wcf.IAuthentication auth = result.AsyncState as Wcf.IAuthentication; Wcf.AuthenticationResponse response = auth.EndLogin(result); write(response.Success.ToString()); } catch (Exception ex) { write(ex.Message); System.Diagnostics.Debug.WriteLine(ex.Message); } }; auth1.BeginLogin("user0", "test0", callback, auth1); This version breaks on this line: Wcf.IAuthentication auth1 = new ChannelFactory<Wcf.IAuthentication>(basicHttpBinding, endpointAddress).CreateChannel(endpointAddress); Throwing System.NotSupportedException. The exception is not very descriptive and the callstack is equally not very helpful: at System.ServiceModel.DiagnosticUtility.ExceptionUtility.BuildMessage(Exception x) at System.ServiceModel.DiagnosticUtility.ExceptionUtility.LogException(Exception x) at System.ServiceModel.DiagnosticUtility.ExceptionUtility.ThrowHelperError(Exception e) at System.ServiceModel.ChannelFactory`1.CreateChannel(EndpointAddress address) at WindowsPhoneApplication2.MainPage.DoLogin() .... Version 2 - Blocking WCF call Here is the version that doesn't use the async pattern. [System.ServiceModel.ServiceContract] public interface IAuthentication { [System.ServiceModel.OperationContract] AuthenticationResponse Login(string user, string password); } public class WcfClientBase<TChannel> : System.ServiceModel.ClientBase<TChannel> where TChannel : class { public WcfClientBase(string name, bool streaming) : base(GetBinding(streaming), GetEndpoint(name)) { ClientCredentials.UserName.UserName = WcfConfig.UserName; ClientCredentials.UserName.Password = WcfConfig.Password; } public WcfClientBase(string name) : this(name, false) {} private static System.ServiceModel.Channels.Binding GetBinding(bool streaming) { System.ServiceModel.BasicHttpBinding binding = new System.ServiceModel.BasicHttpBinding(); binding.MaxReceivedMessageSize = 1073741824; if(streaming) { //binding.TransferMode = System.ServiceModel.TransferMode.Streamed; } /*if(XXXURLXXX.StartsWith("https")) { binding.Security.Mode = BasicHttpSecurityMode.Transport; binding.Security.Transport.ClientCredentialType = HttpClientCredentialType.None; }*/ return binding; } private static System.ServiceModel.EndpointAddress GetEndpoint(string name) { return new System.ServiceModel.EndpointAddress(WcfConfig.Endpoint + name + ".svc"); } protected override TChannel CreateChannel() { throw new System.NotImplementedException(); } } auth.Login("test0", "password0"); This version crashes in System.ServiceModel.ClientBase<TChannel> constructor. The call stack is a bit different: at System.Reflection.MethodInfo.get_ReturnParameter() at System.ServiceModel.Description.ServiceReflector.HasNoDisposableParameters(MethodInfo methodInfo) at System.ServiceModel.Description.TypeLoader.CreateOperationDescription(ContractDescription contractDescription, MethodInfo methodInfo, MessageDirection direction, ContractReflectionInfo reflectionInfo, ContractDescription declaringContract) at System.ServiceModel.Description.TypeLoader.CreateOperationDescriptions(ContractDescription contractDescription, ContractReflectionInfo reflectionInfo, Type contractToGetMethodsFrom, ContractDescription declaringContract, MessageDirection direction) at System.ServiceModel.Description.TypeLoader.CreateContractDescription(ServiceContractAttribute contractAttr, Type contractType, Type serviceType, ContractReflectionInfo& reflectionInfo, Object serviceImplementation) at System.ServiceModel.Description.TypeLoader.LoadContractDescriptionHelper(Type contractType, Type serviceType, Object serviceImplementation) at System.ServiceModel.Description.TypeLoader.LoadContractDescription(Type contractType) at System.ServiceModel.ChannelFactory1.CreateDescription() at System.ServiceModel.ChannelFactory.InitializeEndpoint(Binding binding, EndpointAddress address) at System.ServiceModel.ChannelFactory1..ctor(Binding binding, EndpointAddress remoteAddress) at System.ServiceModel.ClientBase1..ctor(Binding binding, EndpointAddress remoteAddress) at Wcf.WcfClientBase1..ctor(String name, Boolean streaming) at Wcf.WcfClientBase`1..ctor(String name) at Wcf.AuthenticationClient..ctor() at WindowsPhoneApplication2.MainPage.DoLogin() ... Any ideas?

    Read the article

  • How to configure multiple WCF binding configurations for the same scheme

    - by Sandor Drieënhuizen
    I have a set of IIS7-hosted net.tcp WCF services that serve my ASP.NET MVC web application. The web application is accessed over the internet. WCF Services (IIS7) <--> ASP.NET MVC Application <--> Client Browser The services are username authenticated, the account that a client (of my web application) uses to logon ends up as the current principal on the host. I want one of the services to be authenticated differently, because it serves the view model for my logon view. When it's called, the client is obviously not logged on yet. I figure Windows authentication serves best or perhaps just certificate based security (which in fact I should use for the authenticated services as well) if the services are hosted on a machine that is not in the same domain as the web application. That's not the point here though. Using multiple TCP bindings is what's giving me trouble. I tried setting it up like this in my client configuration: <bindings> <netTcpBinding> <binding> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <client> <endpoint contract="Server.IService1" binding="netTcpBinding" address="net.tcp://localhost:8081/Service1.svc"/> <endpoint contract="Server.IService2" binding="netTcpBinding" address="net.tcp://localhost:8081/Service2.svc"/> </client> The server configuration is this: <bindings> <netTcpBinding> <binding portSharingEnabled="true"> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <services> <service name="Service1"> <endpoint contract="Server.IService1, Library" binding="netTcpBinding" address=""/> </service> <service name="Service2"> <endpoint contract="Server.IService2, Library" binding="netTcpBinding" address=""/> </service> </services> <serviceHostingEnvironment> <serviceActivations> <add relativeAddress="Service1.svc" service="Server.Service1"/> <add relativeAddress="Service2.svc" service="Server.Service2"/> </serviceActivations> </serviceHostingEnvironment> The thing is that both bindings don't seem to want live together in my host. When I remove either of them, all's fine but together they produce the following exception on the client: The requested upgrade is not supported by 'net.tcp://localhost:8081/Service2.svc'. This could be due to mismatched bindings (for example security enabled on the client and not on the server). In the server trace log, I find the following exception: Protocol Type application/negotiate was sent to a service that does not support that type of upgrade. Am I looking into the right direction or is there a better way to solve this?

    Read the article

  • "(401)Authorization Required" when making a web service call using Axis

    - by Arun P Johny
    Hi, I'm using apache axis to connect to my sugar crm instance. When I'm trying to connect to the instance it is throwing the following exception Exception in thread "main" AxisFault faultCode: {http://xml.apache.org/axis/}HTTP faultSubcode: faultString: (401)Authorization Required faultActor: faultNode: faultDetail: {}:return code: 401 &lt;!DOCTYPE HTML PUBLIC &quot;-//IETF//DTD HTML 2.0//EN&quot;&gt; &lt;html&gt;&lt;head&gt; &lt;title&gt;401 Authorization Required&lt;/title&gt; &lt;/head&gt;&lt;body&gt; &lt;h1&gt;Authorization Required&lt;/h1&gt; &lt;p&gt;This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required.&lt;/p&gt; &lt;/body&gt;&lt;/html&gt; {http://xml.apache.org/axis/}HttpErrorCode:401 (401)Authorization Required at org.apache.axis.transport.http.HTTPSender.readFromSocket(HTTPSender.java:744) at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:144) at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32) at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118) at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83) at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165) at org.apache.axis.client.Call.invokeEngine(Call.java:2784) at org.apache.axis.client.Call.invoke(Call.java:2767) at org.apache.axis.client.Call.invoke(Call.java:2443) at org.apache.axis.client.Call.invoke(Call.java:2366) at org.apache.axis.client.Call.invoke(Call.java:1812) at org.beanizer.sugarcrm.SugarsoapBindingStub.get_server_info(SugarsoapBindingStub.java:1115) at com.greytip.sugarcrm.GreytipCrm.main(GreytipCrm.java:42) This basically says that I do not have the authorization to the resource. The same code is working fine in my testing environment. Sugarsoap service = new SugarsoapLocator(); SugarsoapPortType port = service.getsugarsoapPort(new java.net.URL( SUGAR_CRM_LOCATION + "/soap.php")); System.out.println(port.get_server_info().getVersion()); User_auth userAuth = new User_auth(); userAuth.setUser_name("user_name"); MessageDigest md = MessageDigest.getInstance("MD5"); String password = getHexString(md.digest("password".getBytes())); userAuth.setPassword(password); // userAuth.setVersion("0.1"); Entry_value login = port.login(userAuth, "myAppName", null); String sessionID = login.getId(); Above code is used to connect to the Sugar CRM installation. here line "System.out.println(port.get_server_info().getVersion());" is throwing the exception. One difference I noticed between the test and production environment is when I used the soap url in the browser the production site pops up a 'Authentication Required' popup. When I gives my proxy username and password in this popup, it shows the soap request details. The same is applicable for the login url also. First it will ask for the 'Authentication' then it will take to the sugar crm login page? Is it a server security setting? If it is then how to set this user name and password using java in a web service call. The authentication required popup is same as the one which comes when we try to access the tomcat manager through a browser. Thanks

    Read the article

  • Configuring multiple WCF binding configurations for the same scheme doesn't work

    - by Sandor Drieënhuizen
    I have a set of IIS7-hosted net.tcp WCF services that serve my ASP.NET MVC web application. The web application is accessed over the internet. WCF Services (IIS7) <--> ASP.NET MVC Application <--> Client Browser The services are username authenticated, the account that a client (of my web application) uses to logon ends up as the current principal on the host. I want one of the services to be authenticated differently, because it serves the view model for my logon view. When it's called, the client is obviously not logged on yet. I figure Windows authentication serves best or perhaps just certificate based security (which in fact I should use for the authenticated services as well) if the services are hosted on a machine that is not in the same domain as the web application. That's not the point here though. Using multiple TCP bindings is what's giving me trouble. I tried setting it up like this in my client configuration: <bindings> <netTcpBinding> <binding> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <client> <endpoint contract="Server.IService1" binding="netTcpBinding" address="net.tcp://localhost:8081/Service1.svc"/> <endpoint contract="Server.IService2" binding="netTcpBinding" bindingConfiguration="public" address="net.tcp://localhost:8081/Service2.svc"/> </client> The server configuration is this: <bindings> <netTcpBinding> <binding portSharingEnabled="true"> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <services> <service name="Service1"> <endpoint contract="Server.IService1, Library" binding="netTcpBinding" address=""/> </service> <service name="Service2"> <endpoint contract="Server.IService2, Library" binding="netTcpBinding" bindingConfiguration="public" address=""/> </service> </services> <serviceHostingEnvironment> <serviceActivations> <add relativeAddress="Service1.svc" service="Server.Service1"/> <add relativeAddress="Service2.svc" service="Server.Service2"/> </serviceActivations> </serviceHostingEnvironment> The thing is that both bindings don't seem to want live together in my host. When I remove either of them, all's fine but together they produce the following exception on the client: The requested upgrade is not supported by 'net.tcp://localhost:8081/Service2.svc'. This could be due to mismatched bindings (for example security enabled on the client and not on the server). In the server trace log, I find the following exception: Protocol Type application/negotiate was sent to a service that does not support that type of upgrade. Am I looking into the right direction or is there a better way to solve this?

    Read the article

  • How to configurie multiple distinct WCF binding configurations for the same scheme

    - by Sandor Drieënhuizen
    I have a set of IIS7-hosted net.tcp WCF services that serve my ASP.NET MVC web application. The web application is accessed over the internet. WCF Services (IIS7) <--> ASP.NET MVC Application <--> Client Browser The services are username authenticated, the account that a client (of my web application) uses to logon ends up as the current principal on the host. I want one of the services to be authenticated differently, because it serves the view model for my logon view. When it's called, the client is obviously not logged on yet. I figure Windows authentication serves best or perhaps just certificate based security (which in fact I should use for the authenticated services as well) if the services are hosted on a machine that is not in the same domain as the web application. That's not the point here though. Using multiple TCP bindings is what's giving me trouble. I tried setting it up like this in my client configuration: <bindings> <netTcpBinding> <binding> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <client> <endpoint contract="Server.IService1" binding="netTcpBinding" address="net.tcp://localhost:8081/Service1.svc"/> <endpoint contract="Server.IService2" binding="netTcpBinding" address="net.tcp://localhost:8081/Service2.svc"/> </client> The server configuration is this: <bindings> <netTcpBinding> <binding portSharingEnabled="true"> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <services> <service name="Service1"> <endpoint contract="Server.IService1, Library" binding="netTcpBinding" address=""/> </service> <service name="Service2"> <endpoint contract="Server.IService2, Library" binding="netTcpBinding" address=""/> </service> </services> <serviceHostingEnvironment> <serviceActivations> <add relativeAddress="Service1.svc" service="Server.Service1"/> <add relativeAddress="Service2.svc" service="Server.Service2"/> </serviceActivations> </serviceHostingEnvironment> The thing is that both bindings don't seem to want live together in my host. When I remove either of them, all's fine but together they produce the following exception on the client: The requested upgrade is not supported by 'net.tcp://localhost:8081/Service2.svc'. This could be due to mismatched bindings (for example security enabled on the client and not on the server). In the server trace log, I find the following exception: Protocol Type application/negotiate was sent to a service that does not support that type of upgrade. Am I looking into the right direction or is there a better way to solve this?

    Read the article

  • Stumped by "The remote server returned an error: (403) Forbidden" with WCF Service in https

    - by RJ
    I have a WCF Service that I have boiled down to next to nothing because of this error. It is driving me up the wall. Here's what I have now. A very simple WCF service with one method that returns a string with the value, "test". A very simple Web app that uses the service and puts the value of the string into a label. A web server running IIS 6 on Win 2003 with a SSL certificate. Other WCF services on the same server that work. I publish the WCF service to it's https location I run the web app in debug mode in VS and it works perfectly. I publish the web app to it's https location on the same server the WCF service resides under the same SSL certificate I get, "The remote server returned an error: (403) Forbidden" I have changed almost every setting in IIS as well as the WCF and Web apps to no avail. I have compared setting in the WCF services that work and everything is the same. Below are the setting in the web.config for the WCF Service and the WEB app: It appears the problem has to do with the Web app but I am out of ideas. Any ideas: WCF Service: <system.serviceModel> <bindings> <client /> <services> <service behaviorConfiguration="Ucf.Smtp.Wcf.SmtpServiceBehavior" name="Ucf.Smtp.Wcf.SmtpService"> <host> <baseAddresses> <add baseAddress="https://test.net.ucf.edu/webservices/Smtp/" /> </baseAddresses> </host> <endpoint address="" binding="wsHttpBinding" contract="Ucf.Smtp.Wcf.ISmtpService" bindingConfiguration="SSLBinding"> <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexHttpsBinding" contract="IMetadataExchange"/> </service> </services> <behaviors> <serviceBehaviors> <behavior name="Ucf.Smtp.Wcf.SmtpServiceBehavior"> <serviceMetadata httpsGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="true" httpsHelpPageEnabled="True"/> </behavior> </serviceBehaviors> </behaviors> Web App: <system.serviceModel> <bindings><wsHttpBinding> <binding name="WSHttpBinding_ISmtpService" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="Transport"> <transport clientCredentialType="None" proxyCredentialType="None" realm="" /> <message clientCredentialType="Windows" negotiateServiceCredential="true" establishSecurityContext="true" /> </security> </binding> <client> <endpoint address="https://net228.net.ucf.edu/webservices/smtp/SmtpService.svc" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_ISmtpService" contract="SmtpService.ISmtpService" name="WSHttpBinding_ISmtpService"> <identity> <dns value="localhost" /> </identity> </client> </system.serviceModel>

    Read the article

  • WCF Error: the client and service bindings may be mismatched?

    - by Rev
    Hi let see server config and client config. Then help me find difference between these configs!! Client config <system.serviceModel> <client> <endpoint address="http://localhost/admin2/AdminCentralService.svc" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_Config" contract="TIR.ThreeTier.ICommandInvoker" name="AdminCentralServiceConfig" /> <endpoint binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_Config" contract="TIR.ThreeTier.ICommandInvoker" name="CommandInvokerConfig" /> </client> <bindings> <wsHttpBinding> <binding name="WSHttpBinding_Config" closeTimeout="00:10:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:10:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="2147483647" maxReceivedMessageSize="2147483647" messageEncoding="Mtom" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="Message"> <transport clientCredentialType="Windows" proxyCredentialType="None" realm="" /> <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" establishSecurityContext="true" /> </security> </binding> </wsHttpBinding> </bindings> Server Config <system.serviceModel> <behaviors> <serviceBehaviors> <behavior name="AdminCentral.Business.Web.Service1Behavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> </serviceBehaviors> </behaviors> <bindings> <wsHttpBinding> <binding name="WSHttpBinding_Config" closeTimeout="00:10:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:10:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="2147483647" maxReceivedMessageSize="2147483647" messageEncoding="Mtom" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647"/> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false"/> <security mode="Message"> <transport clientCredentialType="Windows" proxyCredentialType="None" realm=""/> <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" establishSecurityContext="true"/> </security> </binding> </wsHttpBinding> </bindings> <services> <service behaviorConfiguration="AdminCentral.Business.Web.Service1Behavior" name="AdminCentral.Business.Web.AdminCentralService"> <endpoint address="" binding="wsHttpBinding" contract="AdminCentral.Business.Web.ICommandInvoker"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> </service> </services>

    Read the article

  • How do you pass user credentials from WebClient to a WCF REST service?

    - by Alex
    I am trying to expose a WCT REST service and only users with valid username and password would be able to access it. The username and password are stored in a SQL database. Here is the service contract: public interface IDataService { [OperationContract] [WebGet(ResponseFormat = WebMessageFormat.Json)] byte[] GetData(double startTime, double endTime); } Here is the WCF configuration: <bindings> <webHttpBinding> <binding name="SecureBinding"> <security mode="Transport"> <transport clientCredentialType="Basic"/> </security> </binding> </webHttpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="DataServiceBehavior"> <serviceMetadata httpGetEnabled="true"/> <serviceCredentials> <userNameAuthentication userNamePasswordValidationMode="Custom" customUserNamePasswordValidatorType= "CustomValidator, WCFHost" /> </serviceCredentials> </behavior> </serviceBehaviors> </behaviors> <services> <service behaviorConfiguration="DataServiceBehavior" name="DataService"> <endpoint address="" binding="webHttpBinding" bindingConfiguration="SecureBinding" contract="IDataService" /> </service> </services> I am accessing the service via the WebClient class within a Silverlight application. However, I have not been able to figure out how to pass the user credentials to the service. I tried various values for client.Credentials but none of them seems to trigger the code in my custom validator. I am getting the following error: The underlying connection was closed: An unexpected error occurred on a send. Here is some sample code I have tried: WebClient client = new WebClient(); client.Credentials = new NetworkCredential("name", "password", "domain"); client.OpenReadCompleted += new OpenReadCompletedEventHandler(GetData); client.OpenReadAsync(new Uri(uriString)); If I set the security mode to None, the whole thing works. I also tried other clientCredentialType values and none of them worked. I also self-hosted the WCF service to eliminate the issues related to IIS trying to authenticate a user before the service gets a chance. Any comment on what the underlying issues may be would be much appreciated. Thanks. Update: Thanks to Mehmet's excellent suggestions. Here is the tracing configuration I had: <system.diagnostics> <sources> <source name="System.ServiceModel" switchValue="Information, ActivityTracing" propagateActivity="true"> <listeners> <add name="xml" /> </listeners> </source> <source name="System.IdentityModel" switchValue="Information, ActivityTracing" propagateActivity="true"> <listeners> <add name="xml" /> </listeners> </source> </sources> <sharedListeners> <add name="xml" type="System.Diagnostics.XmlWriterTraceListener" initializeData="c:\Traces.svclog" /> </sharedListeners> </system.diagnostics> But I did not see any message coming from my Silverlight client. As for https vs http, I used https as follows: string baseAddress = "https://localhost:6600/"; _webServiceHost = new WebServiceHost(typeof(DataServices), new Uri(baseAddress)); _webServiceHost.Open(); However, I did not configure any SSL certificate. Is this the problem?

    Read the article

  • Changes to JBoss web.xml have no effect

    - by sixtyfootersdude
    I just added this to my web.xml on my JBOSS server. But it had no effect. I am still allowed to connect to ports that do not use bi-directional certificate exchange. Anyone have an ideas? <!-- Force SSL for entire site as described here: http://wiki.metawerx.net/wiki/ForcingSSLForSectionsOfYourWebsite --> <security-constraint> <!-- defines resources to be protected (in this case everything)--> <web-resource-collection> <!-- name for the resource, can be anything you like --> <!-- Question: is this referenced anywhere else? --> <web-resource-name> Entire Application </web-resource-name> <!-- protect the entire application --> <url-pattern> /* </url-pattern> </web-resource-collection> <!-- defines protection level for protected resource --> <user-data-constraint> <!-- data cannot be observed or changed --> <!-- how it works in tomcat: --> <!-- if (set to integral or confidential && not using ssl) --> <!-- redirect sent to client, redirecting them to same url --> <!-- but using the port defined in the redirect port --> <!-- attribute in the <Connector> element of server.xml --> <!-- default is 443, so in other words user is redirected --> <!-- to same page using ssl. --> <!-- BUT it is differnt for JBOSS!! See this link: http://wiki.metawerx.net/wiki/ForcingSSLForSectionsOfYourWebsite --> <transport-guarantee> CONFIDENTIAL </transport-guarantee> </user-data-constraint> </security-constraint> <login-config> <!-- Client-side SSL certificate based authentication. The cert is passed to the server to authenticate --> <!-- I am pretty sure that CLIENT-CERT should have a dash NOT an underscore see: http://www.mail-archive.com/[email protected]/msg139845.html --> <!-- CLIENT-CERT uses a client's AND server's certificates. See: http://monduke.com/2006/01/19/the-mysterious-client-cert/ --> <auth-method> CLIENT-CERT </auth-method> </login-config> Update Actually it appears that I have made an error in my original posting. The web.xml does block users from connecting to the webservice using http (port C below). However users are still allowed to connect to ports that do not force users to authenticate themselves (port B). I think that users should be able to connect to port A (it has clientAuth="true") but I dont think that people should be able to connect to port B (it has clientAuth="false"). Excerpt from server.xml <Connector port="<A>" ... SSLEnabled="true" ... scheme="https" secure="true" clientAuth="true" keystoreFile="... .keystore" keystorePass="pword" truststoreFile="... .keystore" truststorePass="pword" sslProtocol="TLS"/> <Connector port="<B>" ... SSLEnabled="true" ... scheme="https" secure="true" clientAuth="false" keystoreFile="... .keystore" keystorePass="pword" sslProtocol = "TLS" /> <Connector port="<C>" ... />

    Read the article

  • System.UnsupportedException using WCF on Windows Phone 7

    - by Igor Zevaka
    Has anyone been able to communicate using WCF on Windows Phone Series 7 emulator? I've been trying for the past two days and it's just happening for me. I can get a normal Silverlight control to work in both Silverlight 3 and Silverlight 4, but not the phone version. Here are two versions that I've tried: Version 1 - Using Async Pattern BasicHttpBinding basicHttpBinding = new BasicHttpBinding(); EndpointAddress endpointAddress = new EndpointAddress("http://localhost/wcf/Authentication.svc"); Wcf.IAuthentication auth1 = new ChannelFactory<Wcf.IAuthentication>(basicHttpBinding, endpointAddress).CreateChannel(endpointAddress); AsyncCallback callback = (result) => { Action<string> write = (str) => { this.Dispatcher.BeginInvoke(delegate { //Display something }); }; try { Wcf.IAuthentication auth = result.AsyncState as Wcf.IAuthentication; Wcf.AuthenticationResponse response = auth.EndLogin(result); write(response.Success.ToString()); } catch (Exception ex) { write(ex.Message); System.Diagnostics.Debug.WriteLine(ex.Message); } }; auth1.BeginLogin("user0", "test0", callback, auth1); This version breaks on this line: Wcf.IAuthentication auth1 = new ChannelFactory<Wcf.IAuthentication>(basicHttpBinding, endpointAddress).CreateChannel(endpointAddress); Throwing System.NotSupportedException. The exception is not very descriptive and the callstack is equally not very helpful: at System.ServiceModel.DiagnosticUtility.ExceptionUtility.BuildMessage(Exception x) at System.ServiceModel.DiagnosticUtility.ExceptionUtility.LogException(Exception x) at System.ServiceModel.DiagnosticUtility.ExceptionUtility.ThrowHelperError(Exception e) at System.ServiceModel.ChannelFactory`1.CreateChannel(EndpointAddress address) at WindowsPhoneApplication2.MainPage.DoLogin() .... Version 2 - Blocking WCF call Here is the version that doesn't use the async pattern. [System.ServiceModel.ServiceContract] public interface IAuthentication { [System.ServiceModel.OperationContract] AuthenticationResponse Login(string user, string password); } public class WcfClientBase<TChannel> : System.ServiceModel.ClientBase<TChannel> where TChannel : class { public WcfClientBase(string name, bool streaming) : base(GetBinding(streaming), GetEndpoint(name)) { ClientCredentials.UserName.UserName = WcfConfig.UserName; ClientCredentials.UserName.Password = WcfConfig.Password; } public WcfClientBase(string name) : this(name, false) {} private static System.ServiceModel.Channels.Binding GetBinding(bool streaming) { System.ServiceModel.BasicHttpBinding binding = new System.ServiceModel.BasicHttpBinding(); binding.MaxReceivedMessageSize = 1073741824; if(streaming) { //binding.TransferMode = System.ServiceModel.TransferMode.Streamed; } /*if(XXXURLXXX.StartsWith("https")) { binding.Security.Mode = BasicHttpSecurityMode.Transport; binding.Security.Transport.ClientCredentialType = HttpClientCredentialType.None; }*/ return binding; } private static System.ServiceModel.EndpointAddress GetEndpoint(string name) { return new System.ServiceModel.EndpointAddress(WcfConfig.Endpoint + name + ".svc"); } protected override TChannel CreateChannel() { throw new System.NotImplementedException(); } } auth.Login("test0", "password0"); This version crashes in System.ServiceModel.ClientBase<TChannel> constructor. The call stack is a bit different: at System.Reflection.MethodInfo.get_ReturnParameter() at System.ServiceModel.Description.ServiceReflector.HasNoDisposableParameters(MethodInfo methodInfo) at System.ServiceModel.Description.TypeLoader.CreateOperationDescription(ContractDescription contractDescription, MethodInfo methodInfo, MessageDirection direction, ContractReflectionInfo reflectionInfo, ContractDescription declaringContract) at System.ServiceModel.Description.TypeLoader.CreateOperationDescriptions(ContractDescription contractDescription, ContractReflectionInfo reflectionInfo, Type contractToGetMethodsFrom, ContractDescription declaringContract, MessageDirection direction) at System.ServiceModel.Description.TypeLoader.CreateContractDescription(ServiceContractAttribute contractAttr, Type contractType, Type serviceType, ContractReflectionInfo& reflectionInfo, Object serviceImplementation) at System.ServiceModel.Description.TypeLoader.LoadContractDescriptionHelper(Type contractType, Type serviceType, Object serviceImplementation) at System.ServiceModel.Description.TypeLoader.LoadContractDescription(Type contractType) at System.ServiceModel.ChannelFactory1.CreateDescription() at System.ServiceModel.ChannelFactory.InitializeEndpoint(Binding binding, EndpointAddress address) at System.ServiceModel.ChannelFactory1..ctor(Binding binding, EndpointAddress remoteAddress) at System.ServiceModel.ClientBase1..ctor(Binding binding, EndpointAddress remoteAddress) at Wcf.WcfClientBase1..ctor(String name, Boolean streaming) at Wcf.WcfClientBase`1..ctor(String name) at Wcf.AuthenticationClient..ctor() at WindowsPhoneApplication2.MainPage.DoLogin() ... Any ideas?

    Read the article

  • WCF via SSL connectivity problems

    - by Brett Widmeier
    Hello, I am hosting a WCF service from inside a Windows service using WAS. When I set the service to listen on 127.0.0.1, I have connectivity from my local machine as well as from my network. However, when I set it to listen on my outbound interface port 443, I can no longer even see the wsdl by connecting with a browser. Strangely, I can connect to the service by using telnet. The cert I am using was generated for my interface by a CA, and I have successfully used this exact cert with this service before. When checking the application log, I see that the service starts without error and is listening on the correct interface. From this information, it seems to me that the config file is in a valid state, but somehow misconfigured for what I want. I have, however, previously deployed this same setup on other sites using this config file. In case it is helpful, below is my config file. Any thoughts? <!--<system.diagnostics> <sources> <source name="System.ServiceModel" switchValue="Warning, ActivityTracing" propagateActivity="true"> <listeners> <add type="System.Diagnostics.DefaultTraceListener" name="Default"> <filter type="" /> </add> <add name="ServiceModelTraceListener"> <filter type="" /> </add> </listeners> </source> </sources> <sharedListeners> <add initializeData="app_tracelog.svclog" type="System.Diagnostics.XmlWriterTraceListener, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" name="ServiceModelTraceListener" traceOutputOptions="Timestamp"> <filter type="" /> </add> </sharedListeners> </system.diagnostics>--> <appSettings/> <connectionStrings/> <system.serviceModel> <!--<diagnostics> <messageLogging logEntireMessage="true" logMalformedMessages="true" logMessagesAtServiceLevel="true" logMessagesAtTransportLevel="true" maxMessagesToLog ="1000" maxSizeOfMessageToLog="524288"/> </diagnostics>--> <bindings> <basicHttpBinding> <binding name="basicHttps"> <security mode="Transport"> <transport clientCredentialType="None"/> <message /> </security> </binding> </basicHttpBinding> </bindings> <services> <service behaviorConfiguration="ServiceBehavior" name="<fully qualified name of service>"> <endpoint address="" binding="basicHttpBinding" name="OrdersSoap" contract="<fully qualified name of contract>" bindingNamespace="http://emr.orders.com/WebServices" bindingConfiguration="basicHttps" /> <endpoint binding="mexHttpsBinding" address="mex" contract="IMetadataExchange" /> <host> <baseAddresses> <add baseAddress="https://<external IP>/<name of service>>/" /> </baseAddresses> </host> </service> </services> <behaviors> <serviceBehaviors> <behavior name="ServiceBehavior"> <serviceMetadata httpsGetEnabled="False"/> <serviceDebug includeExceptionDetailInFaults="True" /> <dataContractSerializer maxItemsInObjectGraph="2147483646"/> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel>

    Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >