Search Results

Search found 4224 results on 169 pages for 'wireless'.

Page 23/169 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

  • Is browser based wireless authentication secure?

    - by johnnyb10
    Our wireless network previously used a preshared WPA/WPA2 key for guest access, which allows them access to the Internet. (Our employee access uses 802.1x authentication). We just had a wireless consultant come in to fix various wireless issues we had; one of the things he wound up doing was changing our guest access to HTML-based instead of the preshared key. So now that guest SSID is open (instead of using WPA) and users are presented with a browser-based login screen before they can get on the Internet. My question is: Is this an acceptable method from a security standpoint? I would assume that having an open network is necessarily a bad idea, but the consultant said that the traffic is still using PEAP, so it's secure. I didn't get a chance to question him further on this because we ran late and a bunch of other things came up. Please let me know what you think about the advantages/disadvantages of using HTML-based wireless authentication as opposed to using a preshared WPA key. Thanks...

    Read the article

  • DLINK WBR-1310B Wireless Router seems to hang...

    - by Ira Baxter
    I have a brand new DLINK-1310B Wireless Router (box never before opened, although I bought it the neighborhood computer junk store). I am using it at home (and in fact am using it this instant from a wireless laptop). When operative, I can ping it at 192.168.0.1, and I can log into it from the PC attached to by LAN and from the wireless PC at //192.168.0.1. In the course of the day since I've installed, it seems to have locked up 3 times. Each time the symptoms are my web browser (or other internet service) stops with a "No internet connection" error. Attempts to contact the router via 192.168.0.1 get no reaction, from either the wireless laptop or from the hardwired PC sitting next to it. It doesn't respond to pings to that address either. Rebooting fixes it. Its brand new. I've seen discussion in other questions about aging cheap electronics. Its too new to be aged. Anyboyd else seen this behavior with a DLINK-1310? Or do I just need to exchange it for another and try again? (I hate rolling dice, I bought the DLINK becuase a previous Linksys died of apparant heating problems). Remarkably, nobody talks about how much software is in a router. Is the stuff just buggy?

    Read the article

  • D-LINK DIR-615 router keeps giving my wireless devices bad ip addresses

    - by mlsteeves
    I have a D-LINK DIR-615 router, and wired devices have no problem getting an IP, however; wireless devices end up with a 169.254.. address (subsequently, they cannot access the internet through the router). I have removed all wired connections from the router, so there is no other dhcp server running. I've also gone back to the store, and replaced it with another, thinking that maybe it was defective. According to the router, it gave 192.168.0.101 to the wireless device. According to the wireless device it got 169.254.67.71. I've tried both a laptop and an iPod Touch, both exhibit the same behaviour. Has anyone seen this type of behaviour, or have any ideas of stuff to try? NEW INFORMATION I looked at the logs on the router, and when the wireless device tries to connect, this is what is logged: Sep 10 18:13:39 UDHCPD sending OFFER of 192.168.0.111 Sep 10 18:13:31 UDHCPD sending OFFER of 192.168.0.111 Sep 10 18:13:26 UDHCPD sending OFFER of 192.168.0.111 Sep 10 18:13:23 UDHCPD sending OFFER of 192.168.0.111 Sep 10 18:13:21 UDHCPD sending OFFER of 192.168.0.111 I connected a computer directly to the router, and here is what it looks like: Sep 10 18:14:18 UDHCPD Inform: add_lease 192.168.0.110 Sep 10 18:14:14 UDHCPD sending ACK to 192.168.0.110 Sep 10 18:14:14 UDHCPD sending OFFER of 192.168.0.110 Not sure if that helps or not.

    Read the article

  • Windows 7 Automatically Connecting To Unsecured Wireless Networks On Startup

    - by Xtend
    Most of the questions on this topic related to folks connecting to somebody else's wireless network when their own was available and could remedy the situation by going to their connections and unchecking the "connect automatically" box. See this: " Avoid automatically connecting to wireless network on windows 7 " as an example. In my situation, I've noticed that Win 7 will automatically connect to any unsecured wifi network - even if I have never connected to it in the past. If I am traveling and boot Win 7, it will start and connect to what appears to be the best signaled unsecured network without prompting me for confirmation (note: in the above link, "Naveen" seems to have same problem). Obviously, that is a security concern to me. Further, when I open "Network and Sharing" and "Manage wireless networks" the network is not displayed (probably because I labelled it a public network). Again, these are new, never connected with before, wireless networks. I always promptly disconnect from them but don't want to have to be on constant guard for an auto connection to a malicious network. This began about a month ago, as I recall, Win 7 did not behave like this in the past, I didn't monkey with wifi settings, and don't use a 3rd party connection manager. I did have to download some internet security certificates for army website access but I don't think that should mess with network settings. Any ideas how I can tell Win7 cease automatically connecting to networks or, at least, to prompt me for a confirmation before connecting?

    Read the article

  • Wireless signal changes from strong to weak after connecting

    - by gibberish
    Router (primary AP) is a WRVS4400N, WAP (signal booster) is a WAP4410N. Problem: User is physically located within ten feet of WAP (200 feet from main wireless router). Signal is at 5 bars as user connects to wireless network. Within seconds, signal is at or below two bars and connection is poor. Background: Trying to solve problem of weak wireless signal in back offices. Desired result is for client laptops to automatically switch to the stronger signal. WAP is connected to network via Ethernet cable. WAP is set to AP mode (instead of Wireless Repeater mode) WAP does appear to boost signal. Using Windows 7 sys tray Connect To A Network applet, can observe signal boost as laptop approaches the WAP. Above-described problem happens to users located near or beyond the WAP. It does not happen to users in close proximity to the router. Secondary Question: If using WAP in AP Mode, do WAP and Router (primary AP) need to be on the same channel?

    Read the article

  • getting Internet connection sharing working in a slightly more complicated configuration

    - by tirichitirca t
    I have the following configuration: Computer A - Mac OSX 10.8.4, wireless & wired adapters Computer B - Windows 7 (64 bit), wireless & wired adapters, has internet connection via the wired adapter (ethernet) d-link wired/wireless router. Problem to solve: Connect from computer A to the internet through the wired connection of computer B. I tried the following: I set up a local network between A and B using the d-link router. The configuration is this: D-link router - 192.168.0.1 A - wired connection to the d-link router, static 192.168.0.101 (I could have used the wireless but I preferred the wired connection) B - wireless connection to the d-link router DHCP 192.168.0.102 (but I made sure it always gets the same address) B - wired connection to the internet using some address that begins with 10.x.y.z. In this configuration A can see B. I enabled ICS on the wired adapter of B. I set up the Gateway of A to point to B and DNS servers to point to the DNS servers specified for the 10.x.y.z address. It doesn't work, A goes only as far as B. It can ping the 10.x.y.z address of B though. I then found this article: http://terrybritton.com/windows-internet-connection-sharing-ics-not-working-with-linux-bridging-is-the-solution-916/. Terry is suggesting that a bridge should be defined on B between the two connections. I tried that but basically computer B is screwed as soon as I create the bridge. It can't connect to the internet anymore. It is as if the network bridge seems to think the traffic to the internet should go from the wired connection to the wireless and not the other way around. The other thing that puzzles me is the router itself. In general the router needs an internet address. In a normal configuration it is the router that gets the ip address and the internet traffic goes through the router. In my case I am not interested in that. So, any suggestions to get this working? I wouldn't shy away from using a commercial software but I would think windows 7 should allow me to do it. Thanks

    Read the article

  • Home networking - Wireless switch?

    - by gamers2000
    I currently have a Linksys WRT160N that has a couple wireless clients and a few wired clients. We are planning to switch from DSL to cable and unfortunately, there isn't a cable point in a location close to the wired clients (i.e. the new location of the router would be too far from the wired clients to lay Ethernet cables). Thus, I was wondering if there was a wireless switch of some sort in which it would be a standard Ethernet switch that would connect to my wireless network? (This is a home network,of course.)

    Read the article

  • Windows XP does not list WPA wireless networks

    - by Tomalak
    What can be the reason that Windows XP does not show WPA-encrypted wireless networks? The laptop I have problems with is an older model (Toshiba Satellite Pro 6100) with Windows XP SP3 on it, fresh install. The wireless network card in it is an Agere product that lists as "Toshiba Wireless LAN Mini PCI Card". The networks showed up perfectly before I first tried to connect to one (it was set to WPA2). The connection failed (the card supports WPA only), then something must have happend and Windows hides these networks now. A manually configured WPA setup via Windows' own wizard works, I'm using it right now. The network just won't show up in the list of available network on its own. I suspect that XP incorrectly set a flag somewhere that this network card does not support WPA. Is there such a flag, and if so, how can I change it back?

    Read the article

  • Netgear Wireless-n 150 wrn1000v2

    - by Jordan
    I'm not sure if this is the place to ask this question, move it if it's not. I'm trying to fix a wireless network. It only connects to a few devices and when it does work the connection is spotty. The router is a netgear wireless-n 150 wrn1000v2. Connecting to the router isn't a big problem, but connecting to the internet via WiFi is. I can't upgrade the firmware becuase it is from Comcast and it seems as though they only allow their versions of the firmware. I've monitored the network with wireshark and I see that the devices that are having trouble connecting are constantly asking "who is 192.168.1.1 tell 192.168.1.x" where x is the ip for the device. 192.168.1.1 is the router. This is from running wireshark on the wireless device. What does this mean. At this point I feel like buying a new router is the only option.

    Read the article

  • Setting up multiple wireless access points on same network

    - by SqlRyan
    I'd like to add wireless to my network, and I need multiple access points to cover the whole area. I'd like to set them up so that there's only one "wireless network" that the clients see, and it switches them as seamlessly as possible between access points as they wander around (if that's not possible, then at least have it so that they don't need to set up the security by hand on each one the first time, if possible). I've searched online, and there are quite a few sets of mixed instructions (same vs different SSID, frequency, does the security need to match exactly, etc.). Can somebody who has some experience doing this please let me know what they did? I imagine it's pretty simple, but there seems to be no clear cut "yes, you can do this" online, even though I know you can. I have a mid-size LAN with about 20 workstations and two Domain Controllers on it. Also, I'll be doing this with consumer wireless components, if it makes a difference, not enterprise-level components (ie. Linksys rather than Cisco).

    Read the article

  • Driver choice for addressing ubuntu wireless card issues

    - by Holly
    Hello, this should be a relatively simple question. I'm attempting to get my windows wireless card to work with ubuntu, booted from my portable hard drive. This is the guide I'm attempting to follow is on help.ubuntu.com, /community/WifiDocs/Driver/Ndiswrapper My wireless card is a Broadcom Corporation BCM4318 AirForce One 54g 802.11g Wireless LAN Controller. My computer is an HP Pavilion Entertainment dv5 notebook, which came with Vista 64. I would like confirmation about which of the drivers I should use. At this point, I'm leaning towards Broadcom BCM4318 HP Pavilion zv6000, but I thought it best to ask advice before taking action. The drivers I have to chose from are listed on this page http://sourceforge.net/apps/mediawiki/ndiswrapper/index.php?title=Category:Broadcom Thanks! Holly

    Read the article

  • Mac claims to have connected to wireless network, but hasn't

    - by Mick
    I am attempting to connect a new mac OSX 10.6.5 laptop to a wireless network (I am a windows expert but a mac novice). It used to connect without problem to the network when I had the security set to "64 bit wep". Now I have changed the security on my belkin router to "WPA-PSK (no server)". I have two PC's and an old mac connecting via the new security setting without problem. Now I have the problem that on the new mac, the wireless icon is indicating a good connection (5 dark bars). Also the network name has a tick next to it on the wireless drop down menu. But I can not view any websites. I can not even connect to the router by typing 192.168.2.1 into a browser address bar. Any ideas where I went wrong?

    Read the article

  • remote desktop over wireless

    - by tbischel
    So I'm trying to run remote desktop on my laptop to connect to my home desktop. I have a problem where this works fine if I connect my laptop with an ethernet cable, but fails when I try to use wireless internet access (which works fine for normal internet surfing). I've experienced this problem at home with my wireless router, and at work with the wireless network they have there, so I'm inclined to believe that its a setting local to my machine rather than the router blocking the requests... but I'm not sure where to look. Any suggestions?

    Read the article

  • Wireless Network Connection gets dropped at times under Windows 7

    - by n179911
    I have running Windows 7 on my hp laptop with 802.11n wifi adapter. Some times, I lost wireless internet connection. Under the 'Wireless Connection' when I click the notification area, it said 'my home network is 'connected'... But in the header 'currently Connected to' it said 'no internet access' instead of 'internet access' I can 'fix' my problem by going to the 'wireless connection' my home network, click 'disconnect' and then click 'connect'. And when it comes back up, it gets connected again. any idea how can i fix this problem? Thank you.

    Read the article

  • Wireless DHCP doesn't work until wired Ethernet plugged in

    - by MT_Head
    A client of mine has an Asus R1F tablet running Windows XP Tablet SP3. It has an Intel 3945ABG wireless card; wired Ethernet is a Realtek something-or-other. In the past few days, it's developed an odd problem: WiFi authenticates, but can't get an address via DHCP. plug in wired Ethernet - both interfaces get good addresses unplug cable, WiFi continues to work until shutdown. Next morning, repeat process. I've tried: turning WiFi off/on (there's a slider switch) disabling/re-enabling via Device Mangler uninstalling and reinstalling the driver for the 3945ABG... changing from Intel Pro/SET to Windows Wireless Zero Config (and back) restarting the router changing the static DHCP assignments at the router upgrading the router firmware, just on general principles The router/access point is pfSense 1.2.3RC1 (was 1.2.2); wireless card is Atheros-based. None of the 12 other users (5 with tablets) are having problems.

    Read the article

  • Should I Upgrade My Old Wireless Router?

    - by lyngbym
    I have an old wireless router, and I mean stone age old (5 years). There is nothing wrong technically with the router, it serves my wireless needs at home but it is really darn old. A search on Belkin's site for F5D7230-4 actually turns up a different old model so I scrounged up this old review for you to get a sense of what I'm running: http://www.pcmag.com/article2/0,2817,1572451,00.asp. Is there a valid security reason to replace this router in 2009? Google searches have turned up a few security threats to it and Belkin hasn't released new firmeware in years for it. I am starting to think I should replace it mainly because its NAT is about the only thing protecting me from the outside world. Buying a new wireless router is a boring way to spend money since it just sits on a shelf doing its job. Thoughts?

    Read the article

  • Detect an IP address of a Wireless Access Point device

    - by dempap
    I have a Wireless Access Point device (http://www.szedup.com/show.aspx?id=1706), which I am planning to put into BeagleBoard-xM, in order to achieve wireless communication (LAN). However, I can't find it's IP address. I mean, I have to know it's IP address in order to connect with BeagleBoard-xM via a terminal emulator. For the moment, I have this device connected via Ethernet on my router. My router's setting page shows I have this device connected, but no further information. Is there any way to find the IP address of the Wireless Access Point? I hope of being understood. Any help would be really appreciated.

    Read the article

  • Problem with usb wireless mouse

    - by aiacet
    Recently I have started having problems with my wireless mouse (Wireless Optical Mouse MI-4910D). Sometimes when I start my PC or during a game the pointer/arrow stops moving. When the PC boots the pointer is locked in the center of the screen. If I'm lucky it helps to change the USB wireless adapter from port 1 to port 2 but sometimes this trick doesn't work and I have to restart my PC to get the mouse to work again. Like you can see in the product web page this mouse don't have a driver but only a tool to solve some problems. Thank you in advance to all the "super-users" that reading this question would be help me Ajax

    Read the article

  • Apple Airport Extreme Wireless Card M8881 Connectivity Issue

    - by Carlosfocker
    I bought a Apple Airport Extreme Wireless Card M8881 with the antenna for my old Power Mac G5 1.6 Ghz. The computer is running OS X 10.4. The card works and I can connect to my dlink 802.11g wireless router using WPA2/AES encryption. The problem is that the connection has intermittent connectivity issues. When the issue occurs the signal bars for the connection drop to one or two bars and the performance of the connection suffers greatly. The computer isn't far from the wireless router. I have a laptop at the desk where the mac is and it does not have any issues. I'm not sure what it might be? Updated drivers? Firmware? Let me know if I forgot any important information.

    Read the article

  • Windows XP does not list WPA wireless networks

    - by Tomalak
    What can be the reason that Windows XP does not show WPA-encrypted wireless networks? The laptop I have problems with is an older model (Toshiba Satellite Pro 6100) with Windows XP SP3 on it, fresh install. The wireless network card in it is an Agere product that lists as "Toshiba Wireless LAN Mini PCI Card". The networks showed up perfectly before I first tried to connect to one (it was set to WPA2). The connection failed (the card supports WPA only), then something must have happend and Windows hides these networks now. A manually configured WPA setup via Windows' own wizard works, I'm using it right now. The network just won't show up in the list of available network on its own. I suspect that XP incorrectly set a flag somewhere that this network card does not support WPA. Is there such a flag, and if so, how can I change it back?

    Read the article

  • Belkin Wireless G router not working on Windows 7

    - by coore
    I have a Belkin F5D7230-4 Wireless G router which used to work on XP. I have a clean Windows 7 install (on the same desktop PC), and it just won't work. Device Manager lists the adapter as a USB device, but it says "The drivers for this device are not installed", even though the driver installer said the installation was OK. Manage Wiresless Networks says "wireless is not currently enabled". The WLAN AutoConfig service is running. My specific question is which of the two symptoms above should I go for first? Should I try to fix the driver installation somehow, or should I try to enable wireless? Is one caused by the other, or is this two independent problems? Any other thoughs that could help me are also appreciated.

    Read the article

  • Wireless dropouts that only affect subset of devices

    - by jwaddell
    When watching videos streamed over WiFi from a NAS box (D-Link DNS-323) I am getting wireless dropouts. However they only appear to occur when I have left my laptop (Dell Inspiron 9300 running Windows XP SP3) running; the laptop is usually suspended if I'm not using it. The dropouts have occurred when streaming to a Netgear EVA8000 streaming device, and also to a PS3. I'm using a Netgear DG834G as the wireless modem/router. When a dropout occurs I go to the laptop and see that its wireless connection has also dropped out. The odd thing is that my wife's MacBook and my iPhone still maintain their connections. What could be causing this behaviour, and how do I go about fixing it?

    Read the article

  • BSOD doing wireless connection repair

    - by Kb
    (This should maybe be asked on Super User, but currently it is only for beta users.) We have a Dell Latitude X1 which always gets a BSOD (page fault in non page area) after repair on wireless. Wireless works as long as we do not do repair. Have tried the following with no success: Have updated BIOS to latest version and updated drivers for Intel wireless to the latest version. Any other suggestions? For now we just do not do repair and maybe that is the solution?

    Read the article

  • Unable to access internet if wireless enabled

    - by balki
    The following is my route output. eth0 is my wired network and eth1 is my wireless network. Only wired one has access to internet. If I enable wireless, I am not able to access internet, it tries to access via eth1 and I get 404 page of the wireless router. Why does eth1 have higher preference though default is eth0 (link)? [balakrishnan@mylap ~]$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.26.0.1 0.0.0.0 UG 0 0 0 eth0 10.26.0.0 * 255.255.192.0 U 1 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 192.168.1.0 * 255.255.255.0 U 9 0 0 eth1

    Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >