Search Results

Search found 23082 results on 924 pages for 'address space'.

Page 230/924 | < Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >

• Cisco RV042 VPN with Dynamic IPs - Remote Gateway Not Resolving

  - by Rister

  I have an existing network setup that I inherited from my predecessor. Currently there are two sites, each with a Linksys RV042 VPN router running the 1.3.12.19-tm firmware. They are currently set up with a Gateway to Gateway VPN. One site has a static IP, the other has a Dynamic IP with a hostname set up on no-ip.com. My company is looking to set up another site so I purchased another RV042 only this one was Cisco branded and it is running the latest firmware. I had assumed that I would be able to configure a vpn from our main office (the dynamic ip) to the new site with this router quite easily. However when I set up a new VPN tunnel on either device, it stays on Waiting for Connection and the Remote Gateway shows an ip address of 0.0.0.0 rather than the remote ip address. The other VPN tunnel is still working and I don't see any obvious misconfiguration on the new router. It seems that the router is not resolving the Dynamic DNS address and therefore not giving me the option to connect the VPN. Does a Gateway to Gateway VPN work with Dynamic IP addresses on each end? Are the firmware versions not compatible? Is there something I've missed?

  Read the article

• Need to move a debian server from i686 to x86_64 architecture

  - by user64204

  I have a debian server that I need to move from one hosting provider to another. I don't really know how the old server was setup, all I know is that it's running a Ruby on Rails application with a lot of custom libraries installed and that I should prepare myself for a painful migration. Old server: -os: debian 5.0.9 -used disk space: 3.2GB -architecture: i686 New server: -os: debian 5.0.9 -free disk space: 10GB -architecture: x86_64 As you can see the problem is that the servers are running different architectures. Q: Is there anyway I could somehow migrate the old to the new server in a few steps (or am I just dreaming I could) ? I was thinking maybe I could: -get list of packages and gems installed on old server and use for loop to install them all on the new -copy the disk content from old to new server while excluding what is architecture-specific (the problem is that I don't really know what to exclude).

  Read the article

• How to show a warning message when entering a folder?

  - by Valter Henrique

  I don't know if this is possible, but, I have a folder which I would like to show some warning message when the user enters in it. In my case would say that the folder could be deleted without previous warning to save some disk space. I already create a file inside the folder with the warning message: WARNING! ########################################################################################################################################################## Please, be advised, that the folder /company-backup/amazon-s3 can be deleted without previous WARNING to save disk space as the INFRASTRUCTURE TEAM judge necessary. Best regards, Infrastructure Team. ########################################################################################################################################################### Is that possible ? Any idea ?

  Read the article

• Does SNI represent a privacy concern for my website visitors?

  - by pagliuca

  Firstly, I'm sorry for my bad English. I'm still learning it. Here it goes: When I host a single website per IP address, I can use "pure" SSL (without SNI), and the key exchange occurs before the user even tells me the hostname and path that he wants to retrieve. After the key exchange, all data can be securely exchanged. That said, if anybody happens to be sniffing the network, no confidential information is leaked* (see footnote). On the other hand, if I host multiple websites per IP address, I will probably use SNI, and therefore my website visitor needs to tell me the target hostname before I can provide him with the right certificate. In this case, someone sniffing his network can track all the website domains he is accessing. Are there any errors in my assumptions? If not, doesn't this represent a privacy concern, assuming the user is also using encrypted DNS? Footnote: I also realize that a sniffer could do a reverse lookup on the IP address and find out which websites were visited, but the hostname travelling in plaintext through the network cables seems to make keyword based domain blocking easier for censorship authorities.

  Read the article

• Having two IP Routes/Gateways of last Resort on an HP Switch

  - by SteadH

  We have an HP Layer 3 Switch that is doing IP routing between vlans. The general set up is that the switch has an IP address on each VLAN and IP routing is enabled. On our servers VLAN, we have a firewall that has a connection to the outside world. To set a IP route on the HP router, we use IOS command ip route 0.0.0.0 0.0.0.0 192.168.2.1 where 192.168.2.1 is the address of our firewall, and the zeros essentially mean to route all traffic that the switch doesn't know what to do with out the firewall as a gateway. We're in the middle of an ISP and firewall change. I set up the new firewall and ran the IOS command ip route 0.0.0.0 0.0.0.0 192.168.2.254 (the address of the new firewall). Things started working nicely. When I reviewed the configuration of the switch though, I noticed that it did not replace the previous ip route command, but just added another route. Now, I know how to remove the old firewall route (no ip route 0.0.0.0 0.0.0.0 192.168.2.1), but what is the effect of having these two 0.0.0.0 routes? Is it switch implosion? Will a server just respond back over the route it receives the request from? I've read elsewhere that having two default gateways is an impossibility by definition, but I'm curious about this situation that our switch allowed. Thanks!

  Read the article

• Weird behaviour/rendering of backspace in Terminal.app when SSHing into zsh using tmux/screen

  - by Nils Riedemann

  Hi there, I just stumbled upon a weird problem. When I SSH into my server (centos, zsh) and I type some stuff and hit backspace It looks like a space - but internally it really deleted the characters. ls -l a Note that the space between land a is actually when I hit backspace. When I now hit return ls -a gets executed. This is only in zsh, in bash it works fine. Hope anyone has an idea what this is all about and how to fix this. Update: Only happens when using tmux/screen

  Read the article

• Create intentional border with xrandr

  - by benizi

  Is there a way to tell xrandr "this space intentionally left blank"? I have a laptop that drives its internal display at 1920x1080, but the external monitor I'm using, due to its different aspect ratio, doesn't have that mode. It runs at 1920x1200. So, the basic setup: xrandr \ --output LVDS-1 --mode 1920x1080 \ --output DP-1 --mode 1920x1200 --same-as LVDS-1 [not to scale:] +-----------------------------------+ ¦ ¦ ¦ ¦ (laptop) ¦ (external) ¦ ¦ (LVDS-1) ¦ (DP-1) ¦ ¦ ¦ ¦ ¦ ¦ ¦ +-----------------¦ ¦ (blank...) ¦ ¦ +-----------------+ How can I specify that the 1920x120-sized region below LVDS-1 should be displayed as a black bar that can't be accessed by mouse on DP-1? I tried just coping with --panning 1920x1200+0+0/1920x1080+0+0/0/0/0/120, but I found the screen movement to be very annoying. Update: I found a workaround. (Update 2: changed it to an answer, per suggestion -- workaround doesn't answer the underlying question of leaving space blank.)

  Read the article

• SBS 2008 R2: Did something change with anonymous relays?

  - by gravyface

  Have noticed that prior documentation on setting up anonymous relays in SBS 2008 no longer work without some additional configuration. Used to be able to follow this documentation, which is basically: setup a new receive connector add the IP address(es) that will be permitted to relay check off "anonymous" under Permission Group and then run the Exchange shell script to grant permissions. Now what seems to be happening is that if the permitted IP address happens to fall within the same address space as another more restrictive Receive Connector (like the "Default SBS08" one) and possibly if it's ahead of the new Receive Connector alphabetically (haven't tested that yet), the relay attempt fails with "Client Was Not Authenticated" error. To get it to work, I had to modify the scope of the "Default SBS08" Receive Connector to exclude the one LAN IP that I wanted to allow relaying for. I can't recall ever having to do this for Exchange 2007 Standard and/or any other SBS 2008 servers I've setup over the last couple of years and I don't remember doing this and the wiki entry I added at the office doesn't mention it either. So my question is, has anyone else experienced this? Has there been a new change with R2 or perhaps an Exchange Service Pack?

  Read the article

• Ping with explicit next-hop selection (aka Monitoring multiple default gateways)

  - by Michuelnik

  I have a linux (debian) router with two internet connections (A) and (B). (A) is preferred, (B) is fallback. I want to monitor the internet connection (and not only the availability of the gateways!) and change the default route appropriately. If (A) is not providing internet, switch to (B) If (A) is providing internet again, switch back to (A). Only problem I have is in case (2). My routing table points towards a working internet so I cannot easily detect whether internet is working over link (A) again. I am search for a ping or traceroute (or other diagnosis-tool) which can select the next-hop explicitly. ping -r looks promising, but can only ping a host on the lan. (It only has to write another destination address in the packet, damnit!) traceroute -g gateway looks even more promising and nearly does what I want - but sets source routing options which my next-hops deny. (Not within my administrative boundary...) I just want a $ping, that can: select a source interface (and address) select a next-hop on that interface ping any arbitrary ip address I could do evil trickery with policy-based routing but that would have production impact for all users. I would like to see a side-effect-free solution....

  Read the article

• Moving tool bars in Acrobat X Pro

  - by user67275

  I'm using Acrobat X pro for Windows. I found that two lines of tool bar takes too much space. So I would like to combine them into one line, or move them to left or right side. I do know that I can hide those tool bars by Ctrl+H. But I want to use them without hiding. Since most documents I use are letter size and portrait type, tool bars on the left or right side would be much more efficient way of using space. Does anybody know how I can do this? (I think I could do it in Acrobat 9..but I can't in X version)

  Read the article

• Abbreviations override in comments and quoted text

  - by dotancohen

  I have the following handy abbreviation in VIM: iab for for<Space>(<Space>{{<Esc>kA<Left><Left><Left><Left><C-R>=Eatchar('\s')<CR> This nicely replaces for with the following text: for ( ) { } However, I would like this abbreviation to work only in code, not in comments or in single- or double- quoted strings. How might this constraint be accomplished? Note that I usually code in PHP, but often enough I find myself in other C-style languages (C, Java, occasional C#, etc.). Preventing the abbreviation from working in Python would be a nice bonus though I don't mind manually turning it off in Python if that is not an option. Thanks!

  Read the article

• Access node.js local server though mobile via same shared wifi

  - by laggingreflex

  EDIT: I was stuck in this situation before but then it was Apache-related But this time I'm using NodeJS, so the old answer doesn't help. I'm running apache a NodeJS webserver (on port 80) on Windows 7. I want to access the webserver through my mobile which shares the wifi router with my pc locally. http://localhost works from PC. But I can't access http://192.168.1.4 from either my phone or even my computer. ipconfig /all on my computer lists my ip address as 192.168.1.4 Wireless LAN adapter Wireless Network Connection: IPv4 Address. . . . . . . . . . . : 192.168.1.4(Preferred) I can ping my phone's (internal) ip address [192.168.1.5] from PC and vice-versa, I can ping my PC [192.168.1.4] from my phone. So why can't I access http://192.168.1.4 from my phone? (or PC) Firewall is off.

  Read the article

• Gmail: Received an email intended for another person. [closed]

  - by jonescb

  I'm not really sure how email routing works, but someone ordered something on Amazon and I received the email instead of them. Or maybe we both got it, I don't know. The order doesn't show up in my account, so I'm certain I wasn't charged for it, but I shouldn't be getting other peoples' emails. We'll say that my email is [email protected], and somebody who's email is [email protected] places an order on Amazon. The confirmation email is sent to me at [email protected]. I checked the email header, and it did say To: [email protected] which is not my email address. At first I thought that Google ignores periods in email addresses, but I tested the account setup and it doesn't give any error when you put a period in the address. I didn't create the account; I just used the "check availability" function and the address I chose with a period was fine. Maybe someone with knowledge about how Email works could tell me why this happened. Is this a bug in the way Amazon sends emails? Or is it a bug in how Google receives them? Who should I report this issue to?

  Read the article

• Is ext4 more expensive than ntfs?

  - by ???

  I have just converted an NTFS partition to ext4, however the total space seems reduced from 421G to 415G. Where did the 6G go? And, the reserved space is grown to 199M in ext4, much larger compared to 78M in NTFS, why? The partition is mainly used for movies/musics, so most files are very large (10M each). I want to use ext4 file system, is there any suggestion? mkfs.ntfs: /dev/sdb4 421G 78M 421G 1% /mnt/mmedia mkfs.ext4: /dev/sdb4 415G 199M 393G 1% /mnt/mmedia It's also weired that the remaining size of ext4 is 393G, shouldn't it be 415G or 414G? What happened to the disappeared 22G? Compared to NTFS, ext4 seems eaten 28G in total.

  Read the article

• Best Practice: Migrating Email Boxes (maildir format)

  - by GruffTech

  So here's the situation. I've got about 20,000 maildir email accounts chewing up a several hundred GB of space on our email server. Maildir by nature keeps thousands of tiny a** little files, instead of one .mbox file or the like... So i need to migrate all of these several millions of files from one server to the other, for both space and life-cycle reasons. the conventional methods i would use all work just fine. rsync is the option that comes immediately to mind, however i wanted to see if there are any other "better" options out there. Rsync not handling multi-threaded transfers in this situation sucks because it never actually gets up to speed and saturates my network connection, because of this the transfer from one server to another will take hours beyond hours, when it shouldn't really take more then one or two. I know this is highly opinionated and subjective and will therefore be marked community wiki.

  Read the article

• Certain selected files are not deleting when I use Disk Cleanup

  - by Stephanie Malouff

  I am using Windows 7 and have been trying to retrieve disk space, but when I run Disk Cleanup the Temporary Internet files (18.1KB) and System archived Windows Error Report (267KB) will not delete. It goes through the process as if they are being deleted, but my disk space remains the same; I then go back to Disk Cleanup to see if they have been removed and they are still there. I have tried removing them individually as well, but the outcome is still the same. Can someone please tell me why this is happening and what I can do to get them to delete properly?

  Read the article

• How to safely send newsletters on VPS (SMTP) w/ non-hosted domain as "From" email?

  - by Andy M

  Greetings, I'm trying to understand the safest way to use SMTP. I'm considering purchasing a second virtual server mainly for email sending, on which I will set up PHPlist (a free open-source mailing program), so we have the freedom to send unlimited newsletters (...well, 10,000 per day at least, which requires a VPS rather than shared hosting). Here's my current setup with a paid mass-mailing software: I have a website - let's call it MyHostedDomain.org. I send newsletters with the From / Reply To address as [email protected], which isn't being hosting by me but I have access to the email account. Can I more or less safely set this up with an SMTP server on a VPS? i.e. send messages using [email protected] as the visible address, but having it all go through my VPS SMTP? I cannot authenticate it, right? Is this too risky a practice? Is my only hope to use an address with a domain on the VPS, i.e. [email protected]? I already have a Reverse DNS record for the domain hosted on my current VPS. I also see other suggestions, like SenderID and DKIM. But with all these things combined, will this still work? I don't want to get blacklisted, but the good thing is this is a somewhat private list, and users opt-in to subscribe. So it's a self-made audience. (If it makes you feel better, this is related to a non-profit activity, not some marketing scam...it's for a good cause, I assure you!)

  Read the article

• How to determine if my AWS/EC2 server has been compromised / resolution?

  - by ElHaix

  I have recently seen an increase in network in/out activity on my server and am trying to determine if my AWS/EC2 instance has been compromised, and if so, how to resolve? In my security group I have: Inbound: 80 (HTTP) 0.0.0.0/0 Outbound: 80 (HTTP) 0.0.0.0/0 443 (HTTPS) 0.0.0.0/0 Using TCP-UDP Endpoint Viewer: I see a lot of w3wp.exe TCP processes with varying local ports http and numbered, as well as varying remote ports. Some processes go red/yellow/green on updates . I see Remote address for most w3wp processes are my ec2 instance, however I am seeing several to *.deploy.akamaitechnologies.com and *.deploy.static.akamaitechnologies.com with received bytes varying between 4-11 megs. I also see Ec2Config.exe, remote address: 169.254.169.254 System Process Remote Address: fetcher4-4.p.mail.ru (how can I get rid of this one?!) local port: http remote port: 33432 I am also seeing some system processes from 114.216-244-93-rdns.wowrack.com: Protocol: TCP local port: http remote port: varying As well as some baiduspider "System Process"'s. I'm afraid that my system may have been compromised, and wondering if these results are any indication of that. If so, how can I get eliminate these possible threats? I have MS Security Essentials installed.

  Read the article

• WLC 4400. Get IP

  - by Edward Connelly

  I have three SSID. one is a guest network and I'm having problems with lease times. Its set for web authentication so it passes IPs out even if someone doesn't try and authenticate. Is there a way to get that IP back and not hand another to that mac for a period of time? Poor planning and we didn't allocate enough address space, and we are sandwitched. We could go with another address, but we would have to reconfig lots. since its guest its vlan'd with no access to anthing but the firewalls. would have to change ACLs and routes and interfaces. if it isn't possible we will just have to go that route, just thought there might be an easier solution. session timeout is enabled with 1 hr lease time is set to 4 hrs. no helper DHCP and internal DHCP is set with the space split across three WLCs (60 waps split across those as well).

  Read the article

• Deployment from OVA format

  - by Manvendra Bele

  I am deploying a VM using a OVA format. The size of OVA format is 57 GB. Currently free space on my datastore is 388 GB. At the time of selecting Disk Format type if shows me in red that the disk size required is 1 TB therefore you cannot select THICK provisioning. Therefore, i selected THIN provisiong. It THIN provisioing i am showed that Estimated Disk Usage is 112 GB which is less than the free space available. But even after selecting THIN proviosing at the time of deployment it throws an error that it cannot create disk as the size of disk is larger than the maximum specified limit. My block size is of 1 MB. Pasting my exact error here: Failed to deploy OVF package:File [datastore1] IMS Tester 1/IMS Tester1_2.vmdk is larger than maximum size supported by datastore 'datastore1

  Read the article

• Ubuntu IP Configuration - multiple subnets & interfaces

  - by HaydnWVN

  Have a 'new' mailserver running postfix on Ubuntu. We are having some problems configuring the subnets & interfaces. Basically 2 subnets (.253. & .254.) need to be connected through the 3rd subnet (.252.) where the Router is residing. # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 10.62.254.199 netmask 255.255.0.0 network 10.62.254.0 broadcast 10.62.255.255 #gateway 10.62.252.138 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 10.62.252.138 dns-search ***.com auto eth1 iface eth1 inet static address 10.62.253.199 netmask 255.255.0.0 network 10.62.253.0 broadcast 10.62.255.255 #gateway 10.62.252.138 #dns-nameservers 10.62.254.199 10.62.253.199 10.62.252.199 dns-nameservers 10.62.252.138 dns-search ***.com auto eth2 iface eth2 inet static address 10.62.252.199 netmask 255.255.0.0 network 10.62.252.0 broadcast 10.62.255.255 gateway 10.62.252.138 #dns-nameservers 10.62.254.199 10.62.253.199 10.62.252.199 dns-search ***.com I have an external support company who are looking into this (they built and configured this server), but it's taking far too long... So I'm looking to highlight the mistake!

  Read the article

• Replace files with symlink

  - by soandos

  This question is intended to be the inverse of Replace Symbolic Links with Files, but for windows. I have started running out of space on my SSD drive, and I found that about 12% of used space is in my installer folder (holds the .msi files for all the programs that I have installed) I am looking for two things: A way to move this (or any) folder via symlink. Ideally, some powershell function that I could use to just designate a folder, a destination, and the symlink would be created in the original (pointing to the destination) In this particular case, a registry change that would allow the location to be move would also be helpful, but I would still prefer solution 1. How can this be done?

  Read the article

• How should I organize my backups ?

  - by Patrick

  I'm using for the first time rsync to create daily backups of my websites and I was wondering if I should overwrite the previous copy or should I create multiple copies and overwrite only the oldest one ? (I might not have enough space for that, though). I actually have also this question. Let's suppose most of files are accidentally erases.. does rsync delete all these files from the backup space because they don't exist anymore ? How does exactly work in this case ? thanks

  Read the article

• My pendrive is not working and showing Unknown file System

  - by Debabratta

  I have a pendrive when I insert it into one o my port it shows in the My Computer but when I try to explore, it shows please insert a disk into drive H. However my usb drive is well inserted. I tried to format it but it is showing There is no disk in drive H, Insert a disk then try again. Its properties is showing Unknown File System and the used space and free space part showing 0 bytes. I cann't also check for errors in the drive. Its device status:The device is working properly. I also reinstalled the driver but that did not help me. Please suggest some way to recover the issue. Thanks.

  Read the article

• how to clone a physical "individual partition" vmdk into a "local" (file-based) vmdk?

  - by BJH

  Hello. I have a physical disk with a small (60GB) partition containing my guest OS. The physical disk also contains a large (240GB) block of unpartitioned space. My vmdk is defined as a physical "individual partition". I want to convert the source physical "individual partition" vmdk into a local (file-based) vmdk. The command - vmware-vdiskmanager -r sourcevmdk targetvmdk -t 2 creates a 300GB vmdk that includes both the desired 60GB "individual partition" and the 240GB of useless unpartitioned space ! How can I create a local vmdk with just the individual partition?

  Read the article

< Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >