Search Results

Search found 6178 results on 248 pages for 'section'.

Page 230/248 | < Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >

• Poor upload/download speed on 2 x ADSL lines into a Cisco 2621XM

  - by 2020mobile

  Hi, Sorry never been on this site before so I apologise if not the right section or even forum. I have users complaining of very slow internetn connectivity on site and have checked with our ISP who have said that the line is testing at 8mb. We have 2 x BT lines that have our ISP broadand on them. Both lines go into a Cisco 2600 series router that then has a PIX firewall off that. Connectivity is successful just gone really slow and unable to download anything. Config is below: version 12.3 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname ROUTER-ADSL-INTERNET ! logging buffered 16384 informational enable secret xxx enable password xxx ! username xxx username xxx clock summer-time UK recurring last Sun Mar 1:00 last Sun Oct 1:00 aaa new-model ! ! aaa authentication login default local aaa authorization exec default local aaa session-id common ip subnet-zero no ip source-route ! ! ! ip audit notify log ip audit po max-events 100 no ip bootp server ip name-server 213.208.106.212 no mpls ldp logging neighbor-changes no ftp-server write-enable ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! ! ! ! ! ! ! interface ATM0/0 description 01270 111111 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface FastEthernet0/0 ip address 82.133.32.9 255.255.255.248 shutdown speed 100 full-duplex no cdp enable ! interface ATM0/1 description 01270 222222 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface FastEthernet0/1 ip address 217.146.115.49 255.255.255.240 duplex auto speed auto no cdp enable ! interface Dialer0 ip address 217.146.115.250 255.255.255.248 encapsulation ppp dialer pool 1 dialer-group 1 ppp authentication chap callin ppp chap hostname [email protected] ppp chap password 7 xxxxx ppp multilink ! ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ! no ip http server no ip http secure-server ! no logging trap access-list 10 permit 217.146.115.50 access-list 10 permit 82.133.32.10 access-list 10 deny any access-list 22 permit 217.146.115.50 access-list 22 permit 217.206.239.86 access-list 22 permit 82.133.32.10 access-list 22 deny any dialer-list 1 protocol ip permit no cdp run ! ! snmp-server community xxxxxx RO 10 snmp-server enable traps tty radius-server authorization permit missing Service-Type ! ! ! ! ! ! line con 0 exec-timeout 5 0 password 7 xxxxxx line aux 0 no exec line vty 0 4 access-class 22 in exec-timeout 5 0 password 7 xxxxxx transport input telnet ssh transport output none line vty 5 15 password 7 xxxxxx transport input telnet ssh ! ntp clock-period 17180095 ntp server 130.88.200.98 ! ! end Now my knowledge is very limited but ISP have said that while the lines are bonded each needs a seperate login as they've recently changed their L2TP router and that enforces the use of seperate logins - when the lines were configured we were given two logins. So, my question is what changes do I need to make to the config in order to get this working? it was ok before their change and I do have another login :- 01270 111111 - [email protected] 01270 222222 - [email protected] Apologies for the long email and thanks for taking the time to read it. Any more info I can provide please let me know. Thanks,

  Read the article

• Token replacement

  - by ClarkeyBoy

  Hey, I currently have a system on my website whereby I can put something like "[cfe]" anywhere in the site and, when the page is rendered, it will replace it with the root to the customer front end (same for "[afe]" and admin front end - so in the admin front end I can put "[cfe]/Default.aspx" to link to the homepage on the customer front end. This is in place as I have a development version of the site, then a test and a live version too. All 3 may have different roots to each section (for example the way the website is set up, the root to the admin front end in test is "/test/Administration/", but in live and development it is just "/Administration/"). Which version it is depends on the URL - all my development sites are in a folder called "development", whereas test is in a folder called "test" and any live urls do not contain either of these. There are also 3 different databases - one for each. All 3, obviously, require a different connection string. I also have a string replacement function in place which can change, for example, "[Product:Cards]" to point to the Cards catalogue page. Problem is that for this I go through all the products and do a replacement on "[Product:" & Product.Name() & "]". However I would like to take this further. I would like to pick up these custom strings when the page is rendered so it picks up "[Product:Cards]" and then goes off to find product "Cards" and replaces the string with a link to the Cards page, rather than looping through all the products and doing a replace just on the off chance that there are any replacements to make. One use for this, which I may start using in the future if I can figure out how to do this, is like on Wikipedia where you put the title of the page you want to point to, then a divider (think its a pipe from memory) then the link text. I would like to apply this to the above situation. This way broken links can also be picked up, and reported to admin (a major advantage as they can then locate them and remove the link or add the product / page that it refers to). I would like to take this to the stage where content of entire pages can be rearranged (kinda like web parts, but not as advanced as that). I mean like so you can put [layout type="3columnImageTopRight" image="imageurl"]Content here[/layout]. This will display, as specified, an image in the top right (with padding at the left and bottom) and 3 columns - maybe with the image spanning one or two columns). The imageurl can be specified as another token: maybe like [Image:imagename.gif] or something. This replaces it with the root to the image folder and then the specified filename. I have not really looked into how I am going to split the content into 3 columns yet, but this would be something to look at for my dissertation and then implement after my project deadline at least. Does anyone have any ideas or pointers which could help me with this? Also if this is not strictly token replacement then please point me to what it is, so I can further develop this. Thanks in advance, Regards, Richard Clarke

  Read the article

• Bind9 as a caching resolver fails with mismatch ID on localhost but not external IP

  - by argibbs

  I'm running Ubuntu 12.04 LTS on a machine on my private network. I have bind9 installed (v9.8.1-P1) via aptitude, so it appears to have put all the bits in the right places and the service starts automatically. I plan on adding some zones later, but first I'm just trying to get it working as a caching resolver. I installed bind, configured it, and starting using it. Initially I thought it was working ok, but then I found some sites weren't being resolved. I've pinned it down to being linked to the size of the result and bind failing-over to TCP mode. So: I'm trying to find out why bind is failing when I query for domain info and the result is 512 bytes (causing a truncation and retry on TCP). Specifically it fails with ID mismatches if I point dig at localhost, but works when I query the machine's own IP (192.168.0.2). This appears to be backwards to the problem that most people have when using bind (fails on external ip, works on localhost). If I do dig @localhost google.com (which has a response of <512 bytes) then it works; I get no warnings, and plenty of output. $ dig @localhost google.com ; <<>> DiG 9.8.1-P1 <<>> @localhost google.com [snip lots of output] ;; Query time: 39 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Thu Oct 17 23:08:34 2013 ;; MSG SIZE rcvd: 495 If I do dig @localhost play.google.com (which has a larger response) then I get back something like: $ dig @localhost play.google.com ;; Truncated, retrying in TCP mode. ;; ERROR: ID mismatch: expected ID 3696, got 27130 This seems to be standard, documented behaviour - when the UDP response is large (here 'large' == 512 bytes) it falls back to TCP. The ID mismatch is not expected though. If I do dig @192.168.0.2 play.google.com then I still get the warning about using TCP mode, but it otherwise works $ dig @192.168.0.2 play.google.com ;; Truncated, retrying in TCP mode. ; <<>> DiG 9.8.1-P1 <<>> @192.168.0.2 play.google.com [snip most of the output] ;; Query time: 5 msec ;; SERVER: 192.168.0.2#53(192.168.0.2) ;; WHEN: Thu Oct 17 23:05:55 2013 ;; MSG SIZE rcvd: 521 At the moment I've not set up any zones in my local instance, so it's just acting as a caching resolver. My options config is pretty much unchanged from standard, I've got the following set: options { directory "/var/cache/bind"; allow-query { 192.168/16; 127.0.0.1; }; forwarders { 8.8.8.8; 8.8.4.4; }; dnssec-validation auto; edns-udp-size 4096 ; allow-transfer { any; }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; And my /etc/resolv.conf is just nameserver 127.0.0.1 search .local The problem definitely seems linked to the failover to TCP mode: if I do dig +bufsize=4096 @localhost play.google.com then it works; no warning about failover to TCP, no ID mismatch, and a standard looking result. To be honest, if there was a way to force bind to use a much larger UDP buffer, that'd probably be good enough for me, but all I've been able to find mention of is max-udp-size 4096 and that doesn't change the behaviour in any way. I've also tried setting edns-udp-size 512 in case the problem is some weird EDNS issue with my router (which seems unlikely since the +bufsize=4096 flag works fine). I've also tried dig +trace @localhost play.google.com; this works. No truncation/TCP warning, and a full result. I've also tried changing the servers used in the forwarder (e.g. to OpenDNS), but that makes no difference. There's one last data point: if I repetitively do dig @localhost play.google.com I don't always get an ID mismatch, but sometimes a REFUSED error. I'm much more likely to get a REFUSED error if I dig the non-localhost IP (192.168.0.2) first: $ dig @localhost play.google.com ;; Truncated, retrying in TCP mode. ; <<>> DiG 9.8.1-P1 <<>> @localhost play.google.com ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: REFUSED, id: 35104 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;play.google.com. IN A ;; Query time: 4 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Thu Oct 17 23:20:13 2013 ;; MSG SIZE rcvd: 33 Any insights or things to try would be much appreciated.

  Read the article

• Extending XHTML

  - by Daniel Schaffer

  I'm playing around with writing a jQuery plugin that uses an attribute to define form validation behavior (yes, I'm aware there's already a validation plugin; this is as much a learning exercise as something I'll be using). Ideally, I'd like to have something like this: Example 1 - input: <input id="name" type="text" v:onvalidate="return this.value.length > 0;" /> Example 2 - wrapper: <div v:onvalidate="return $(this).find('[value]').length > 0;"> <input id="field1" type="text" /> <input id="field2" type="text" /> <input id="field3" type="text" /> </div> Example 3 - predefined: <input id="name" type="text" v:validation="not empty" /> The goal here is to allow my jQuery code to figure out which elements need to be validated (this is already done) and still have the markup be valid XHTML, which is what I'm having a problem with. I'm fairly sure this will require a combination of both DTD and XML Schema, but I'm not really quite sure how exactly to execute. Based on this article, I've created the following DTD: <!ENTITY % XHTML1-formvalidation1 PUBLIC "-//W3C//DTD XHTML 1.1 +FormValidation 1.0//EN" "http://new.dandoes.net/DTD/FormValidation1.dtd" > %XHTML1-formvalidation1; <!ENTITY % Inlspecial.extra "%div.qname; " > <!ENTITY % xhmtl-model.mod SYSTEM "formvalidation-model-1.mod" > <!ENTITY % xhtml11.dtd PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd" > %xhtml11.dtd; And here is "formvalidation-model-1": <!ATTLIST %div.qname; %onvalidation CDATA #IMPLIED %XHTML1-formvalidation1.xmlns.extra.attrib; > I've never done DTD before, so I'm not even really exactly sure what I'm doing. When I run my page through the W3 XHTML validator, I get 80+ errors because it's getting duplicate definitions of all the XHTML elements. Am I at least on the right track? Any suggestions? EDIT: I removed this section from my custom DTD, because it turned out that it was actually self-referencing, and the code I got the template from was really for combining two DTDs into one, not appending specific items to one: <!ENTITY % XHTML1-formvalidation1 PUBLIC "-//W3C//DTD XHTML 1.1 +FormValidation 1.0//EN" "http://new.dandoes.net/DTD/FormValidation1.dtd" > %XHTML1-formvalidation1; I also removed this, because it wasn't validating, and didn't seem to be doing anything: <!ENTITY % Inlspecial.extra "%div.qname; " > Additionally, I decided that since I'm only adding a handful of additional items, the separate files model recommended by W3 doesn't really seem that helpful, so I've put everything into the dtd file, the content of which is now this: <!ATTLIST div onvalidate CDATA #IMPLIED> <!ENTITY % xhtml11.dtd PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd" > %xhtml11.dtd; So now, I'm not getting any DTD-related validation errors, but the onvalidate attribute still is not valid. Update: I've ditched the DTD and added a schema: http://schema.dandoes.net/FormValidation/1.0.xsd Using v:onvalidate appears to validate in Visual Studio, but the W3C service still doesn't like it. Here's a page where I'm using it so you can look at the source: http://new.dandoes.net/auth And here's the link to the w3c validation result: http://validator.w3.org/check?uri=http://new.dandoes.net/auth&charset=(detect+automatically)&doctype=Inline&group=0 Is this about as close as I'll be able to get with this, or am I still doing something wrong?

  Read the article

• A little bit of Ajax goes a long way

  - by Holland

  ..except when you're having problems. My problem is this: I have a hierarchical list of categories stored in a database which I wish to output in a dropdown list. The hierarchy comes into place when the subcategories are to be displayed, which are dependent on a parent id (which equals out to the first seven or so main categories listed). My thoughts are relatively simple: when the user clicks the dynamically allocated list of main categories, they are clicking on an option tag. For each option tag, an id (i.e., the parent) is listed in the value attribute, as well as an argument which is sent to a Javascript function which then uses AJAX to get the data via PHP and sends it to my 'javascript.php' file. The file then does magic, and populates the subcategory list, which is dependent on the main category selected. I believe I have the idea down, it's just that I'm implementing the solution improperly, for some reason. Here's what I have so far: from javascript.php <script type="text/javascript" src=<?=JPATH_BASE.DS.'includes'.DS.'jquery.js';?>> var ajax = { ajax.sendAjaxData = function(method, url, dataTitle, ajaxData) { $.ajax({ type: 'post', url: "C:/wamp/www/patention/components/com_adsmanagar/views/edit/tmpl/javascript.php", data: { 'data' : ajaxData }, success: function(result){ // we have the response alert("Your request was successful." + result); }, error: function(e){ alert('Error: ' + e); } }); } ajax.printSubCategoriesOnClick = function(parent) { alert("hello world!"); ajax.sendAjaxData('post', 'javascript.php', 'data' parent); <?php $categories = $this->formData->getCategories($_POST['data']); ?> ajax.printSubCategories(<?=$categories;?>); } ajax.printSubCategories = function(categories) { var select = document.getElementById("subcategories"); for (var i = 0; i < categories.length; i++) { var opt = document.createElement("option"); opt.text = categories['name']; opt.value = categories['id']; } } } </script> the function used to populate the form data function populateCategories($parent, FormData $formData) { $categories = $formData->getCategories($parent); echo "<pre>"; print_r($categories); echo "</pre>"; foreach($categories as $section => $row){ ?> <option value=<?=$row['id'];?> onclick="ajax.printSubCategoriesOnClick(<?=$row['id']?>)"> <? echo $row['name']; ?> </option> <?php } } The problem is that when I try to do a print_r on my $_POST variable, nothing shows up. I also receive an "undefined index" error (which refers to the key I set for the data type). I'm thinking that for some reason, the data is being sent to my form.php file, or my default.php file which includes both the form.php and javascript.php files via a function. Is there something specific that I'm missing here? Just looking up basic AJAX syntax (via jQuery) hasn't helped out, unfortunately.

  Read the article

• How to convert html textfield/area data to server-side txt file? [closed]

  - by olijake

  How can I make a script that will convert the text/data in a html textfield/textarea and send it to the server, which then saves it as a .txt file for storage? NOTE: I am hosting a website(for testing purposes) using Apache 2.2 on a Windows 7 machine. I downloaded PHP version 5.4.7, but have not yet installed on my server yet (not sure if I will need it, but also not sure how to install it). 1st problem: Saving text to server Html page/section with title textfield, text textarea, and submit button. You would enter a title, the text/notes you need in the textfield, then press the submit button to have it store the text in the textarea, as a .txt file on the server called .txt. 2nd problem: Opening text from server Html with list of all txt files OR textfield for entering in title, then submit button to send the title of the requested .txt file to the server, which would then load it up on the page. Here is what I have so far: (let me know if there is something that I should change or if something just isn't correct in the index.html code I have right now.) <!DOCTYPE HTML> <html> <head> <title>Insert Title</title> <meta http-equiv="Content-Type" content="Text/HTML; charset=UTF-8"/> </head> <body> <form method="post" action="save.INSERT_FILETYPE" name="textfile" enctype="multipart/form-data"> <input type="text" name="title"><br/> <textarea rows="20" cols="100" id="text" name="text"></textarea><br/> <input type="submit" name="submit" value="Submit Text to Server"> </form><br/> <hr style="width: 100%; height: 4px;"><br/> <form method="post" action="open.INSERT_FILETYPE" name="textfile" enctype="multipart/form-data"> <input type="text" name="title"><br/> <input type="submit" name="submit" value="Submit Txt File Request"> </form><br/> <div>Opened text file displays here or goes on another page</div> </body> </html> I plan on using a server side language/script, but ANYTHING that gets the job done is fine. I already tried looking into using some ASP/jScript/PHP, but have had some trouble implementing it into my server. (ie: getting the modules loaded and telling the server what file types to parse.) I know this may be an extremely easy fix, but then in that case, hopefully you wouldn't mind helping me out a little :). If it turns out that this is MUCH more complicated than I expect, then feel free to let me know that, so I don't waste me time running in circles. I appreciate any help/assistance that you can provide, Thanks, Jake EDIT: Wrong Apache version. In response to the comments/closing of this thread: My question: "How exactly do I install the PHP module on the apache server? and is this even possible? and is this even recommended?" ^ In case I wasn't clear enough already To Clarify: I understand the basics of PHP, I just have trouble with INSTALLING PHP on the apache server. (I have used PHP before, but never successfully on apache (so far...)) For my script I wrote something similar to this already (using fopen() and a few other commands): <?php fopen("notes.txt", "r"); file_put_contents("notes.txt",teststring1); ?> I have used javascript for this task before also (although I prefer using PHP and server-side languages): <script language="javascript"> function WriteToFile(){ var fso = new ActiveXObject("Scripting.FileSystemObject"); var s = fso.CreateTextFile("C:\\NewFile.txt", true); var text=document.getElementById("TextArea1").innerText; s.WriteLine(text); s.WriteLine('***********************'); s.Close(); } </script>

  Read the article

• Jquery fadeOut looking different in FF than in Chrome/Safari

  - by StealthRT

  Hey all, i have a page that when a user desides to delete a company, it fades out using the jquery fadeOut() command. This works great and does as it should in FireFox but for some reason it doesn't do the same in Chrome/Safari browsers. The problem is that i have a png image overlay on top of the company logo image that also fades out with the company logo. But if there are more than one company logo on the page, it moves the others in the place where the one got deleted. Like i said, it works fine (and as it should) in Firefox and even IE (SHOCK!) but not in Chrome or Safari. This is the code i use to delete (fade out) the section: $('#moreInfoM' + theNum).fadeOut("slow"); $('#moreInfo' + theNum).fadeOut("slow"); $('#liNum' + theNum).fadeOut("slow"); Where moreInfoM, moreInfo & liNum are all within the code for each logo image. TheNum is just a unique number for each logo just for reference. And the ASP code: For iLoop = LBound(compNames) to UBound(compNames) theWidth = (iwidth / 2) ImgDimension(Server.MapPath("img/company/" & compNames(iLoop) & ".jpg")) theWidth = (iwidth / 2) response.write "<li onClick=""$('#moreInfo" & y & "').slideToggle('slow');"" id=""liNum" & y & """>" & vbcr if theBrowser = "chrome" or theBrowser = "safari" then response.write "<img src=""img/clickMI.png"" width=""97"" height=""33"" style=""position:absolute;width:97px;height:33px;z-index:12;padding-top: 54px; padding-left:" & theWidth & "px;"">" & vbcr else response.write "<img src=""img/clickMI.png"" width=""97"" height=""33"" style=""position:absolute;width:97px;height:33px;z-index:12;padding-top: 50px; padding-left:" & theWidth & "px;"">" & vbcr end if response.write "<img src=""img/company/" & compNames(iLoop) & ".jpg"" height=""60"" style=""border: 1px solid #4C3C1B;padding: 2px;background-color: #CCC; margin-left: 10px; margin-right: 10px; margin-bottom: 5px; margin-top: 5px;"" id=""moreInfoM" & y & """ />" & vbcr response.write "</li>" & vbcr y = y + 1 Next I have made a video of FF and Chrome to give you a better understanding. http://www.youtube.com/watch?v=ZQaRvosvRKE Thanks! David

  Read the article

• Objective-C woes: cellForRowAtIndexPath crashes.

  - by Mr. McPepperNuts

  I want to the user to be able to search for a record in a DB. The fetch and the results returned work perfectly. I am having a hard time setting the UItableview to display the result tho. The application continually crashes at cellForRowAtIndexPath. Please, someone help before I have a heart attack over here. Thank you. @implementation SearchViewController @synthesize mySearchBar; @synthesize textToSearchFor; @synthesize myGlobalSearchObject; @synthesize results; @synthesize tableView; @synthesize tempString; #pragma mark - #pragma mark View lifecycle - (void)viewDidLoad { [super viewDidLoad]; } #pragma mark - #pragma mark Table View - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { //handle selection; push view } - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView{ /* if(nullResulSearch == TRUE){ return 1; }else { return[results count]; } */ return[results count]; } - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { return 1; // Test hack to display multiple rows. } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"Search Cell Identifier"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if(cell == nil){ cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleValue2 reuseIdentifier:CellIdentifier] autorelease]; } NSLog(@"TEMPSTRING %@", tempString); cell.textLabel.text = tempString; return cell; } #pragma mark - #pragma mark Memory management - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; } - (void)viewDidUnload { self.tableView = nil; } - (void)dealloc { [results release]; [mySearchBar release]; [textToSearchFor release]; [myGlobalSearchObject release]; [super dealloc]; } #pragma mark - #pragma mark Search Function & Fetch Controller - (NSManagedObject *)SearchDatabaseForText:(NSString *)passdTextToSearchFor{ NSManagedObject *searchObj; UndergroundBaseballAppDelegate *appDelegate = [[UIApplication sharedApplication] delegate]; NSManagedObjectContext *managedObjectContext = appDelegate.managedObjectContext; NSFetchRequest *request = [[NSFetchRequest alloc] init]; NSPredicate *predicate = [NSPredicate predicateWithFormat:@"name == [c]%@", passdTextToSearchFor]; NSEntityDescription *entity = [NSEntityDescription entityForName:@"Entry" inManagedObjectContext:managedObjectContext]; NSSortDescriptor *sortDescriptor = [[NSSortDescriptor alloc] initWithKey:@"name" ascending:NO]; NSArray *sortDescriptors = [[NSArray alloc] initWithObjects:sortDescriptor, nil]; [request setSortDescriptors:sortDescriptors]; [request setEntity: entity]; [request setPredicate: predicate]; NSError *error; results = [managedObjectContext executeFetchRequest:request error:&error]; if([results count] == 0){ NSLog(@"No results found"); searchObj = nil; nullResulSearch == TRUE; }else{ if ([[[results objectAtIndex:0] name] caseInsensitiveCompare:passdTextToSearchFor] == 0) { NSLog(@"results %@", [[results objectAtIndex:0] name]); searchObj = [results objectAtIndex:0]; nullResulSearch == FALSE; }else{ NSLog(@"No results found"); searchObj = nil; nullResulSearch == TRUE; } } [tableView reloadData]; [request release]; [sortDescriptors release]; return searchObj; } - (void)searchBarSearchButtonClicked:(UISearchBar *)searchBar{ textToSearchFor = mySearchBar.text; NSLog(@"textToSearchFor: %@", textToSearchFor); myGlobalSearchObject = [self SearchDatabaseForText:textToSearchFor]; NSLog(@"myGlobalSearchObject: %@", myGlobalSearchObject); tempString = [myGlobalSearchObject valueForKey:@"name"]; NSLog(@"tempString: %@", tempString); } @end *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[UILongPressGestureRecognizer isEqualToString:]: unrecognized selector sent to instance 0x3d46c20'

  Read the article

• Freezes (not crashes) with GCD, blocks and Core Data

  - by Lukasz

  I have recently rewritten my Core Data driven database controller to use Grand Central Dispatch to manage fetching and importing in the background. Controller can operate on 2 NSManagedContext's: NSManagedObjectContext *mainMoc instance variable for main thread. this contexts is used only by quick access for UI by main thread or by dipatch_get_main_queue() global queue. NSManagedObjectContext *bgMoc for background tasks (importing and fetching data for NSFetchedresultsController for tables). This background tasks are fired ONLY by user defined queue: dispatch_queue_t bgQueue (instance variable in database controller object). Fetching data for tables is done in background to not block user UI when bigger or more complicated predicates are performed. Example fetching code for NSFetchedResultsController in my table view controllers: -(void)fetchData{ dispatch_async([CDdb db].bgQueue, ^{ NSError *error = nil; [[self.fetchedResultsController fetchRequest] setPredicate:self.predicate]; if (self.fetchedResultsController && ![self.fetchedResultsController performFetch:&error]) { NSSLog(@"Unresolved error in fetchData %@", error); } if (!initial_fetch_attampted)initial_fetch_attampted = YES; fetching = NO; dispatch_async(dispatch_get_main_queue(), ^{ [self.table reloadData]; [self.table scrollRectToVisible:CGRectMake(0, 0, 100, 20) animated:YES]; }); }); } // end of fetchData function bgMoc merges with mainMoc on save using NSManagedObjectContextDidSaveNotification: - (void)bgMocDidSave:(NSNotification *)saveNotification { // CDdb - bgMoc didsave - merging changes with main mainMoc dispatch_async(dispatch_get_main_queue(), ^{ [self.mainMoc mergeChangesFromContextDidSaveNotification:saveNotification]; // Extra notification for some other, potentially interested clients [[NSNotificationCenter defaultCenter] postNotificationName:DATABASE_SAVED_WITH_CHANGES object:saveNotification]; }); } - (void)mainMocDidSave:(NSNotification *)saveNotification { // CDdb - main mainMoc didSave - merging changes with bgMoc dispatch_async(self.bgQueue, ^{ [self.bgMoc mergeChangesFromContextDidSaveNotification:saveNotification]; }); } NSfetchedResultsController delegate has only one method implemented (for simplicity): - (void)controllerDidChangeContent:(NSFetchedResultsController *)controller { dispatch_async(dispatch_get_main_queue(), ^{ [self fetchData]; }); } This way I am trying to follow Apple recommendation for Core Data: 1 NSManagedObjectContext per thread. I know this pattern is not completely clean for at last 2 reasons: bgQueue not necessarily fires the same thread after suspension but since it is serial, it should not matter much (there is never 2 threads trying access bgMoc NSManagedObjectContext dedicated to it). Sometimes table view data source methods will ask NSFetchedResultsController for info from bgMoc (since fetch is done on bgQueue) like sections count, fetched objects in section count, etc.... Event with this flaws this approach works pretty well of the 95% of application running time until ... AND HERE GOES MY QUESTION: Sometimes, very randomly application freezes but not crashes. It does not response on any touch and the only way to get it back to live is to restart it completely (switching back to and from background does not help). No exception is thrown and nothing is printed to the console (I have Breakpoints set for all exception in Xcode). I have tried to debug it using Instruments (time profiles especially) to see if there is something hard going on on main thread but nothing is showing up. I am aware that GCD and Core Data are the main suspects here, but I have no idea how to track / debug this. Let me point out, that this also happens when I dispatch all the tasks to the queues asynchronously only (using dispatch_async everywhere). This makes me think it is not just standard deadlock. Is there any possibility or hints of how could I get more info what is going on? Some extra debug flags, Instruments magical tricks or build setting etc... Any suggestions on what could be the cause are very much appreciated as well as (or) pointers to how to implement background fetching for NSFetchedResultsController and background importing in better way.

  Read the article

• Why C# doesn't implement indexed properties ?

  - by Thomas Levesque

  I know, I know... Eric Lippert's answer to this kind of question is usually something like "because it wasn't worth the cost of designing, implementing, testing and documenting it". But still, I'd like a better explanation... I was reading this blog post about new C# 4 features, and in the section about COM Interop, the following part caught my attention : By the way, this code uses one more new feature: indexed properties (take a closer look at those square brackets after Range.) But this feature is available only for COM interop; you cannot create your own indexed properties in C# 4.0. OK, but why ? I already knew and regretted that it wasn't possible to create indexed properties in C#, but this sentence made me think again about it. I can see several good reasons to implement it : the CLR supports it (for instance, PropertyInfo.GetValue has an index parameter), so it's a pity we can't take advantage of it in C# it is supported for COM interop, as shown in the article (using dynamic dispatch) it is implemented in VB.NET it is already possible to create indexers, i.e. to apply an index to the object itself, so it would probably be no big deal to extend the idea to properties, keeping the same syntax and just replacing this with a property name It would allow to write that kind of things : public class Foo { private string[] _values = new string[3]; public string Values[int index] { get { return _values[index]; } set { _values[index] = value; } } } Currently the only workaround that I know is to create an inner class (ValuesCollection for instance) that implements an indexer, and change the Values property so that it returns an instance of that inner class. This is very easy to do, but annoying... So perhaps the compiler could do it for us ! An option would be to generate an inner class that implements the indexer, and expose it through a public generic interface : // interface defined in the namespace System public interface IIndexer<TIndex, TValue> { TValue this[TIndex index] { get; set; } } public class Foo { private string[] _values = new string[3]; private class <>c__DisplayClass1 : IIndexer<int, string> { private Foo _foo; public <>c__DisplayClass1(Foo foo) { _foo = foo; } public string this[int index] { get { return _foo._values[index]; } set { _foo._values[index] = value; } } } private IIndexer<int, string> <>f__valuesIndexer; public IIndexer<int, string> Values { get { if (<>f__valuesIndexer == null) <>f__valuesIndexer = new <>c__DisplayClass1(this); return <>f__valuesIndexer; } } } But of course, in that case the property would actually return a IIndexer<int, string>, and wouldn't really be an indexed property... It would be better to generate a real CLR indexed property. What do you think ? Would you like to see this feature in C# ? If not, why ?

  Read the article

• Mysql - Help me change this single complex query to use temporary tables

  - by sandeepan-nath

  About the system: - There are tutors who create classes and packs - A tags based search approach is being followed.Tag relations are created when new tutors register and when tutors create packs (this makes tutors and packs searcheable). For details please check the section How tags work in this system? below. Following is the concerned query Can anybody help me suggest an approach using temporary tables. We have indexed all the relevant fields and it looks like this is the least time possible with this approach:- SELECT SUM(DISTINCT( t.tag LIKE "%Dictatorship%" OR tt.tag LIKE "%Dictatorship%" OR ttt.tag LIKE "%Dictatorship%" )) AS key_1_total_matches , SUM(DISTINCT( t.tag LIKE "%democracy%" OR tt.tag LIKE "%democracy%" OR ttt.tag LIKE "%democracy%" )) AS key_2_total_matches , COUNT(DISTINCT( od.id_od )) AS tutor_popularity, CASE WHEN ( IF(( wc.id_wc > 0 ), ( wc.wc_api_status = 1 AND wc.wc_type = 0 AND wc.class_date > '2010-06-01 22:00:56' AND wccp.status = 1 AND ( wccp.country_code = 'IE' OR wccp.country_code IN ( 'INT' ) ) ), 0) ) THEN 1 ELSE 0 END AS 'classes_published' , CASE WHEN ( IF(( lp.id_lp > 0 ), ( lp.id_status = 1 AND lp.published = 1 AND lpcp.status = 1 AND ( lpcp.country_code = 'IE' OR lpcp.country_code IN ( 'INT' ) ) ), 0) ) THEN 1 ELSE 0 END AS 'packs_published', td . *, u . * FROM tutor_details AS td JOIN users AS u ON u.id_user = td.id_user LEFT JOIN learning_packs_tag_relations AS lptagrels ON td.id_tutor = lptagrels.id_tutor LEFT JOIN learning_packs AS lp ON lptagrels.id_lp = lp.id_lp LEFT JOIN learning_packs_categories AS lpc ON lpc.id_lp_cat = lp.id_lp_cat LEFT JOIN learning_packs_categories AS lpcp ON lpcp.id_lp_cat = lpc.id_parent LEFT JOIN learning_pack_content AS lpct ON ( lp.id_lp = lpct.id_lp ) LEFT JOIN webclasses_tag_relations AS wtagrels ON td.id_tutor = wtagrels.id_tutor LEFT JOIN webclasses AS wc ON wtagrels.id_wc = wc.id_wc LEFT JOIN learning_packs_categories AS wcc ON wcc.id_lp_cat = wc.id_wp_cat LEFT JOIN learning_packs_categories AS wccp ON wccp.id_lp_cat = wcc.id_parent LEFT JOIN order_details AS od ON td.id_tutor = od.id_author LEFT JOIN orders AS o ON od.id_order = o.id_order LEFT JOIN tutors_tag_relations AS ttagrels ON td.id_tutor = ttagrels.id_tutor LEFT JOIN tags AS t ON t.id_tag = ttagrels.id_tag LEFT JOIN tags AS tt ON tt.id_tag = lptagrels.id_tag LEFT JOIN tags AS ttt ON ttt.id_tag = wtagrels.id_tag WHERE ( u.country = 'IE' OR u.country IN ( 'INT' ) ) AND CASE WHEN ( ( tt.id_tag = lptagrels.id_tag ) AND ( lp.id_lp > 0 ) ) THEN lp.id_status = 1 AND lp.published = 1 AND lpcp.status = 1 AND ( lpcp.country_code = 'IE' OR lpcp.country_code IN ( 'INT' ) ) ELSE 1 END AND CASE WHEN ( ( ttt.id_tag = wtagrels.id_tag ) AND ( wc.id_wc > 0 ) ) THEN wc.wc_api_status = 1 AND wc.wc_type = 0 AND wc.class_date > '2010-06-01 22:00:56' AND wccp.status = 1 AND ( wccp.country_code = 'IE' OR wccp.country_code IN ( 'INT' ) ) ELSE 1 END AND CASE WHEN ( od.id_od > 0 ) THEN od.id_author = td.id_tutor AND o.order_status = 'paid' AND CASE WHEN ( od.id_wc > 0 ) THEN od.can_attend_class = 1 ELSE 1 END ELSE 1 END AND ( t.tag LIKE "%Dictatorship%" OR t.tag LIKE "%democracy%" OR tt.tag LIKE "%Dictatorship%" OR tt.tag LIKE "%democracy%" OR ttt.tag LIKE "%Dictatorship%" OR ttt.tag LIKE "%democracy%" ) GROUP BY td.id_tutor HAVING key_1_total_matches = 1 AND key_2_total_matches = 1 ORDER BY tutor_popularity DESC, u.surname ASC, u.name ASC LIMIT 0, 20 The problem The results returned by the above query are correct (AND logic working as per expectation), but the time taken by the query rises alarmingly for heavier data and for the current data I have it is like 10 seconds as against normal query timings of the order of 0.005 - 0.0002 seconds, which makes it totally unusable. Somebody suggested in my previous question to do the following:- create a temporary table and insert here all relevant data that might end up in the final result set run several updates on this table, joining the required tables one at a time instead of all of them at the same time finally perform a query on this temporary table to extract the end result All this was done in a stored procedure, the end result has passed unit tests, and is blazing fast. I have never worked with temporary tables till now. Only if I could get some hints, kind of schematic representations so that I can start with... Is there something faulty with the query? What can be the reason behind 10+ seconds of execution time? How tags work in this system? When a tutor registers, tags are entered and tag relations are created with respect to tutor's details like name, surname etc. When a Tutors create packs, again tags are entered and tag relations are created with respect to pack's details like pack name, description etc. tag relations for tutors stored in tutors_tag_relations and those for packs stored in learning_packs_tag_relations. All individual tags are stored in tags table. The explain query output:- Please see this screenshot - http://www.test.examvillage.com/Explain_query_improved.jpg

  Read the article

• postfix 5.7.1 Relay access denied when sending mail with cron

  - by zensys

  Reluctant to ask because there is so much here about 'postfix relay access denied' but I cannot find my case: I use php (Zend Framework) to send emails outside my network using the Google mail server because I could not send mail outside my server (user: web). However when I sent out an email via cron (user: root, I believe), still using ZF, using the same mail config/credentials, I get the message: '5.7.1 Relay access denied' I guess I need to know one of two things: 1. How can I use the google smtp server from cron 2. What do I need to change in my config to send mail using my own server instead of google Though the answer to 2. is the more structural solution I assume, I am quite happy with an answer to 1. as well because I think Google is better at server maintaince (security/spam) than I am. Below my ZF application.ini mail section, main.cf and master.cf: application.ini: resources.mail.transport.type = smtp resources.mail.transport.auth = login resources.mail.transport.host = "smtp.gmail.com" resources.mail.transport.ssl = tls resources.mail.transport.port = 587 resources.mail.transport.username = [email protected] resources.mail.transport.password = xxxxxxx resources.mail.defaultFrom.email = [email protected] resources.mail.defaultFrom.name = "my company" main.cf: # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = /usr/share/doc/postfix # TLS parameters smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = mail.second-start.nl mydomain = second-start.nl alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all html_directory = /usr/share/doc/postfix/html message_size_limit = 30720000 virtual_alias_domains = virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /home/vmail virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 smtpd_sasl_auth_enable = yes broken_sasl_auth_clients = yes smtpd_sasl_authenticated_header = yes # see under Spam smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps virtual_transport = dovecot dovecot_destination_recipient_limit = 1 # Spam disable_vrfy_command = yes smtpd_delay_reject = yes smtpd_helo_required = yes smtpd_helo_restrictions = permit_mynetworks, check_helo_access hash:/etc/postfix/helo_access, reject_non_fqdn_hostname, reject_invalid_hostname, permit smtpd_recipient_restrictions = permit_sasl_authenticated, reject_unauth_destination, reject_invalid_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unknown_sender_domain, reject_unknown_recipient_domain, permit_mynetworks, reject_non_fqdn_hostname, reject_rbl_client sbl.spamhaus.org, reject_rbl_client zen.spamhaus.org, reject_rbl_client cbl.abuseat.org, reject_rbl_client bl.spamcop.net, permit smtpd_error_sleep_time = 1s smtpd_soft_error_limit = 10 smtpd_hard_error_limit = 20 master.cf: # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - - - - smtpd #smtp inet n - - - 1 postscreen #smtpd pass - - - - - smtpd #dnsblog unix - - - - 0 dnsblog #tlsproxy unix - - - - 0 tlsproxy #submission inet n - - - - smtpd # -o smtpd_tls_security_level=encrypt # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #smtps inet n - - - - smtpd # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - - - - qmqpd pickup fifo n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - - 300 1 oqmgr tlsmgr unix - - - 1000? 1 tlsmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce trace unix - - - - 0 bounce verify unix - - - - 1 verify flush unix n - - 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - - - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - - - - smtp -o smtp_fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - - - - showq error unix - - - - - error retry unix - - - - - error discard unix - - - - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - - - - lmtp anvil unix - - - - 1 anvil scache unix - - - - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # # Many of the following services use the Postfix pipe(8) delivery # agent. See the pipe(8) man page for information about ${recipient} # and other message envelope options. # ==================================================================== # # maildrop. See the Postfix MAILDROP_README file for details. # Also specify in main.cf: maildrop_destination_recipient_limit=1 # maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient} # # ==================================================================== # # Recent Cyrus versions can use the existing "lmtp" master.cf entry. # # Specify in cyrus.conf: # lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4 # # Specify in main.cf one or more of the following: # mailbox_transport = lmtp:inet:localhost # virtual_transport = lmtp:inet:localhost # # ==================================================================== # # Cyrus 2.1.5 (Amos Gouaux) # Also specify in main.cf: cyrus_destination_recipient_limit=1 # #cyrus unix - n n - - pipe # user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user} # # ==================================================================== # Old example of delivery via Cyrus. # #old-cyrus unix - n n - - pipe # flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user} # # ==================================================================== # # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -d ${recipient}

  Read the article

• Show/hide glossary page in YUI

  - by QLiu

  Hello All, I am trying to develop a toggle function like http://www.lutsr.nl/yui/toggle/ But it works a little different as them. When user enters the glossary page, he sees a full list of Alphabet with all the techical terms explaination All — A | B | C | E | G | H | M | P | Q | R | S | T | U | Z | ActiveSync® Microsoft® ActiveSync est l’ application permettant à un pocket pc d’ échanger des informations avec un ordinateur . Le Pocket PC doit utiliser Microsoft Windows Mobile™ ou Windows CE. Bluetooth® Le Bluetooth permet aux informations d’ être transmises entre les appareils électroniques qui ont le Bluetooth. Si vous utilisez le Bluetooth, vous n'avez pas besoin de connecter les périphériques à l'aide de câbles. ............................. If the user clicks B Alphabet, the rest of content will hide, except B. and B will be move to top of the section. If the user clicks All aplphabet, the whole list will be reset. What I have now, it is able to show/hide and listen to click event. Here is my source code: <a href="#A" class ="toggle" rel="A_section,fade,20"> A</a> | <a href="#B" class ="toggle" rel="B_section,fade,20"> B</a> | Script: //Load JavaScript Ready event. this.toggleLinks=YAHOO.util.Dom.getElementsByClassName("toggle"); for(var i=0; i<this.toggleLinks.length; i++) { YAHOO.util.Event.addListener(this.toggleLinks[i], "click", this.animateElements,this); } toggleElements : function(e,controlNode,refEl) { if(controlNode && refEl) { if(YAHOO.util.Dom.hasClass(refEl,"show")) { YAHOO.util.Dom.removeClass(controlNode,"selected"); YAHOO.util.Dom.removeClass(refEl,"show"); } else { YAHOO.util.Dom.addClass(controlNode,"selected"); YAHOO.util.Dom.addClass(refEl,"show"); } } // to disable control node's default behaviour return false; }, animateElements : function(e,obj) { // obj = javascript toggle object // this = link clicked YAHOO.util.Event.preventDefault(e); if(this.rel) { controlNode = this; } if(typeof(controlNode) == "string") { controlNode = YAHOO.util.Dom.get(controlNode); } // objParameters // [0] = object id // [1] = animation type (fade, slide) // [2] = animation duration (seconds) var linkClicked = this; var objParameters = controlNode.rel.split(","); var refEl = YAHOO.util.Dom.get(objParameters[0]); var objStatus = YAHOO.util.Dom.hasClass(refEl,"show"); // if true, object is shown switchClasses = function() { obj.toggleOtherElements(e,linkClicked,refEl); obj.toggleElements(e,linkClicked,refEl); } if(objParameters[1] == "fade") { if(objStatus == true) { var attributes = { opacity: {from: .999, to: 0} } var objAnim = new YAHOO.util.Anim(objParameters[0],attributes); objAnim.useSeconds = false; objAnim.duration = objParameters[2]; objAnim.onComplete.subscribe(switchClasses); objAnim.animate(); } else { YAHOO.util.Dom.setStyle(objParameters[0],"opacity",0); switchClasses(); var attributes = { opacity: {from: 0, to: .999} } var objAnim = new YAHOO.util.Anim(objParameters[0],attributes); objAnim.useSeconds = false; objAnim.duration = objParameters[2]; objAnim.animate(); } } else if (objParameters[1] == "slide") { // not implemented yet } else { // NO ANIMATION - switch classes switchClasses(); } }, toggleOtherElements : function(e,linkClicked,refEl) { // toggle selected state of other elements pointing to the same source for(var i=0; i<this.toggleLinks.length; i++) { var objParameters = this.toggleLinks[i].rel.split(","); var linkClickedParameters = linkClicked.rel.split(","); if(objParameters[0] == linkClickedParameters[0]) { if(YAHOO.util.Dom.hasClass(this.toggleLinks[i],"selected")) { YAHOO.util.Dom.removeClass(this.toggleLinks[i],"selected"); } else { YAHOO.util.Dom.addClass(this.toggleLinks[i],"selected"); } } } }

  Read the article

• Performance surprise with "as" and nullable types

  - by Jon Skeet

  I'm just revising chapter 4 of C# in Depth which deals with nullable types, and I'm adding a section about using the "as" operator, which allows you to write: object o = ...; int? x = o as int?; if (x.HasValue) { ... // Use x.Value in here } I thought this was really neat, and that it could improve performance over the C# 1 equivalent, using "is" followed by a cast - after all, this way we only need to ask for dynamic type checking once, and then a simple value check. This appears not to be the case, however. I've included a sample test app below, which basically sums all the integers within an object array - but the array contains a lot of null references and string references as well as boxed integers. The benchmark measures the code you'd have to use in C# 1, the code using the "as" operator, and just for kicks a LINQ solution. To my astonishment, the C# 1 code is 20 times faster in this case - and even the LINQ code (which I'd have expected to be slower, given the iterators involved) beats the "as" code. Is the .NET implementation of isinst for nullable types just really slow? Is it the additional unbox.any that causes the problem? Is there another explanation for this? At the moment it feels like I'm going to have to include a warning against using this in performance sensitive situations... Results: Cast: 10000000 : 121 As: 10000000 : 2211 LINQ: 10000000 : 2143 Code: using System; using System.Diagnostics; using System.Linq; class Test { const int Size = 30000000; static void Main() { object[] values = new object[Size]; for (int i = 0; i < Size - 2; i += 3) { values[i] = null; values[i+1] = ""; values[i+2] = 1; } FindSumWithCast(values); FindSumWithAs(values); FindSumWithLinq(values); } static void FindSumWithCast(object[] values) { Stopwatch sw = Stopwatch.StartNew(); int sum = 0; foreach (object o in values) { if (o is int) { int x = (int) o; sum += x; } } sw.Stop(); Console.WriteLine("Cast: {0} : {1}", sum, (long) sw.ElapsedMilliseconds); } static void FindSumWithAs(object[] values) { Stopwatch sw = Stopwatch.StartNew(); int sum = 0; foreach (object o in values) { int? x = o as int?; if (x.HasValue) { sum += x.Value; } } sw.Stop(); Console.WriteLine("As: {0} : {1}", sum, (long) sw.ElapsedMilliseconds); } static void FindSumWithLinq(object[] values) { Stopwatch sw = Stopwatch.StartNew(); int sum = values.OfType<int>().Sum(); sw.Stop(); Console.WriteLine("LINQ: {0} : {1}", sum, (long) sw.ElapsedMilliseconds); } }

  Read the article

• Android: preferences not being stored automatically

  - by Vitaly

  I'm trying to use preference screen. I'm following all steps from online tutorial (once I couldn't get it working, I found other tutorials, and steps seem to be fine). I get to preferences screen, edit values, return to calling activity (via hardware return button). In DDMS perspective FileExplorer shows package_name_preferences.xml file with preferences that should be stored. It contains: <?xml version='1.0' encoding='utf-8' standalone='yes' ?> <map> <string name="false">kg</string> </map> while I expect (data line only shown). <string name="weight">kg</string> Also, if I go change only 1 preference, the same value changes, not a new row is created. I'm just tempted to write my own preference classes that would store data in files or DB, but I know that preferences should work, it just doesn't save properly my stuff. Edit Tutorials used: Main Tutorial - Was using this as a base, simplified, as I needed only 3 listPreferences so far. Another One - Used this one back when first installed android, so referred to this one for its section on preferences Code: (Screen loads, so I'm not showing Manifest) public class MyPrefs extends PreferenceActivity { @Override public void onCreate(Bundle bundle) { super.onCreate(bundle); addPreferencesFromResource(R.xml.my_prefs); } } my_prefs.xml <PreferenceScreen xmlns:android="http://schemas.android.com/apk/res/android"> <PreferenceCategory android:title="Value Settings"> <ListPreference android:title="Distance" android:summary="Metric (Kilometer) vs Imperial (Imperial)" android:defaultValue="km" android:key="@+id/distanceMesurement" android:entries="@array/distance" android:entryValues="@array/distance_values"/> <ListPreference android:title="Weight" android:summary="Metric (Kilogram) vs Imperial (Pound)" android:defaultValue="kg" android:key="@+id/weightMesurement" android:entries="@array/weight" android:entryValues="@array/weight_values"/> </PreferenceCategory> </PreferenceScreen> calling MyPrefs from MainScreen Intent i = new Intent(MainScreen.this, MyPrefs.class); startActivity(i); arrays.xml <resources> <string-array name="weight"> <item name="kg">Kilogram (kg)</item> <item name="lb">Pound (lb)</item> </string-array> <string-array name="weight_values"> <item name="kg">kg</item> <item name="lb">lb</item> </string-array> <string-array name="distance"> <item name="km">Kilometer (km)</item> <item name="mi">Mile (mi)</item> </string-array> <string-array name="distance_values"> <item name="km">km</item> <item name="mi">mi</item> </string-array> </resources>

  Read the article

• Modelsim (XE III/Starter 6.4b) not allowing me to define a macro function

  - by montooner

  I'm working on a Xiling FPGA for a course project. Normally we use the lab computers, but I'm trying to install on my own computer. So, I'm trying to include a macro file using line: `include "Const.v" But the following macro function doesn't work. Any ideas why? `ifdef synthesis // if Synplify `define SYNPLIFY `define SYNTHESIS `define MACROSAFE `else // if not Synplify `ifdef MODELSIM `define SIMULATION `define MACROSAFE `else `define XST // synthesis translate_off // if XST then stop compiling `undef XST `define SIMULATION `define MODELSIM // synthesis translate_on // if XST then resume compiling `ifdef XST `define SYNTHESIS `define MACROSAFE `endif `endif `endif //------------------------------------------------------------------------------ //------------------------------------------------------------------------------ // Section: Log2 Macro // Desc: A macro to take the log base 2 of any number. Useful for // calculating bitwidths. Warning, this actually calculates // log2(x-1), not log2(x). //------------------------------------------------------------------------------ `ifdef MACROSAFE `define log2(x) ((((x) > 1) ? 1 : 0) + \ (((x) > 2) ? 1 : 0) + \ (((x) > 4) ? 1 : 0) + \ (((x) > 8) ? 1 : 0) + \ (((x) > 16) ? 1 : 0) + \ (((x) > 32) ? 1 : 0) + \ (((x) > 64) ? 1 : 0) + \ (((x) > 128) ? 1 : 0) + \ (((x) > 256) ? 1 : 0) + \ (((x) > 512) ? 1 : 0) + \ (((x) > 1024) ? 1 : 0) + \ (((x) > 2048) ? 1 : 0) + \ (((x) > 4096) ? 1 : 0) + \ (((x) > 8192) ? 1 : 0) + \ (((x) > 16384) ? 1 : 0) + \ (((x) > 32768) ? 1 : 0) + \ (((x) > 65536) ? 1 : 0) + \ (((x) > 131072) ? 1 : 0) + \ (((x) > 262144) ? 1 : 0) + \ (((x) > 524288) ? 1 : 0) + \ (((x) > 1048576) ? 1 : 0) + \ (((x) > 2097152) ? 1 : 0) + \ (((x) > 4194304) ? 1 : 0) + \ (((x) > 8388608) ? 1 : 0) + \ (((x) > 16777216) ? 1 : 0) + \ (((x) > 33554432) ? 1 : 0) + \ (((x) > 67108864) ? 1 : 0) + \ (((x) > 134217728) ? 1 : 0) + \ (((x) > 268435456) ? 1 : 0) + \ (((x) > 536870912) ? 1 : 0) + \ (((x) > 1073741824) ? 1 : 0)) `endif

  Read the article

• Print driver installs failing

  - by Kasius

  All of the Windows 7 64-bit Enterprise machines in my organization are failing to install a good number of printer drivers that previously installed without issue. This only happens with printer drivers. And not with all printer drivers. Just some. Network drivers, video drivers, etc. have had no problems. Here is part of setupapi.dev.log for a Dymo LabelWriter printer driver that is failing to install: dvi: {Plug and Play Service: Device Install for USBPRINT\DYMOLABELWRITER_450_TURBO\6&538F51D&0&USB001} ump: Creating Install Process: DrvInst.exe 09:36:58.071 ndv: Infpath=C:\Windows\INF\oem0.inf ndv: DriverNodeName=dymo.inf:DYMO.NTamd64.6.0:LW_450_TURBO_VISTA:8.1.0.363:usbprint\dymolabelwriter_450_aa08 ndv: DriverStorepath=C:\Windows\System32\DriverStore\FileRepository\dymo.inf_amd64_neutral_3a631b118b7a5828\dymo.inf ndv: Building driver list from driver node strong name... dvi: Searching for hardware ID(s): dvi: usbprint\dymolabelwriter_450_aa08 dvi: dymolabelwriter_450_aa08 inf: Opened PNF: 'C:\Windows\System32\DriverStore\FileRepository\dymo.inf_amd64_neutral_3a631b118b7a5828\dymo.inf' ([strings]) dvi: Selected driver installs from section [LW_450_TURBO_VISTA] in 'c:\windows\system32\driverstore\filerepository\dymo.inf_amd64_neutral_3a631b118b7a5828\dymo.inf'. dvi: Class GUID of device changed to: {4d36e979-e325-11ce-bfc1-08002be10318}. dvi: Set selected driver complete. ndv: {Core Device Install} 09:36:58.133 inf: Opened INF: 'C:\Windows\INF\oem0.inf' ([strings]) inf: Saved PNF: 'C:\Windows\INF\oem0.PNF' (Language = 0409) dvi: {DIF_ALLOW_INSTALL} 09:36:58.164 dvi: Using exported function 'ClassInstall32' in module 'C:\Windows\system32\ntprint.dll'. dvi: Class installer == ntprint.dll,ClassInstall32 dvi: No CoInstallers found dvi: Class installer: Enter 09:36:58.164 dvi: Class installer: Exit dvi: Default installer: Enter 09:36:58.180 dvi: Default installer: Exit dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 09:36:58.180 ndv: Installing files... dvi: {DIF_INSTALLDEVICEFILES} 09:36:58.180 dvi: Class installer: Enter 09:36:58.180 inf: Opened INF: 'C:\Windows\System32\DriverStore\FileRepository\dymo.inf_amd64_neutral_3a631b118b7a5828\dymo.inf' ([strings]) inf: Opened INF: 'C:\Windows\System32\DriverStore\FileRepository\dymo.inf_amd64_neutral_3a631b118b7a5828\dymo.inf' ([strings]) !!! dvi: Class installer: failed(0x00000490)! !!! dvi: Error 1168: Element not found. dvi: {DIF_INSTALLDEVICEFILES - exit(0x00000490)} 09:37:22.063 ndv: Device install status=0x00000490 ndv: Performing device install final cleanup... ! ndv: Queueing up error report since device installation failed... ndv: {Core Device Install - exit(0x00000490)} 09:37:22.063 dvi: {DIF_DESTROYPRIVATEDATA} 09:37:22.063 dvi: Class installer: Enter 09:37:22.063 dvi: Class installer: Exit dvi: Default installer: Enter 09:37:22.063 dvi: Default installer: Exit dvi: {DIF_DESTROYPRIVATEDATA - exit(0xe000020e)} 09:37:22.063 ump: Server install process exited with code 0x00000490 09:37:22.063 ump: {Plug and Play Service: Device Install exit(00000490)} Notice these lines in particular: !!! dvi: Class installer: failed(0x00000490)! !!! dvi: Error 1168: Element not found. dvi: {DIF_INSTALLDEVICEFILES - exit(0x00000490)} 09:37:22.063 ndv: Device install status=0x00000490 From what I have read, the "Element not found" error should be accompanied by an event describing what element was not found. The error that appears in Device Manager is "The driver cannot be installed because it is either not digitally signed or not signed in the appropriate manner." It appears to be signed fine though. It has an accompanying .CAT file and worked previously. And when installing, the following messages are logged in setupapi.dev.log: sto: {DRIVERSTORE_IMPORT_NOTIFY_VALIDATE} 09:36:56.277 inf: Opened INF: 'C:\Windows\System32\DriverStore\Temp\{272e2305-961c-7942-9ede-966f01047043}\dymo.inf' ([strings]) sig: {_VERIFY_FILE_SIGNATURE} 09:36:56.292 sig: Key = dymo.inf sig: FilePath = C:\Windows\System32\DriverStore\Temp\{272e2305-961c-7942-9ede-966f01047043}\dymo.inf sig: Catalog = C:\Windows\System32\DriverStore\Temp\{272e2305-961c-7942-9ede-966f01047043}\DYMO.CAT sig: Success: File is signed in catalog. sig: {_VERIFY_FILE_SIGNATURE exit(0x00000000)} 09:36:56.355 sto: Validating driver package files against catalog 'DYMO.CAT'. sto: Driver package is valid. sto: {DRIVERSTORE_IMPORT_NOTIFY_VALIDATE exit(0x00000000)} 09:36:56.402 sto: Verified driver package signature: sto: Digital Signer Score = 0x0D000005 sto: Digital Signer Name = Microsoft Windows Hardware Compatibility Publisher Now here's where it gets strange. If I take it off the domain, it installs fine. But it doesn't seem to have anything to do with Group Policy. I moved the machine to an OU that blocks inheritance, ran a gpupdate, ran rsop.msc to verify, and tried again. And it still didn't work. Likewise, I removed a machine from the domain, manually set all of the domain Group Policy settings in gpedit.msc, and tried that way, and it worked fine. So it seems like the Group Policy settings are irrelevant. What other domain-related issue could be causing this though? Any ideas on what to try next would be greatly appreciated. I'm not sure where to go from here. Thanks!

  Read the article

• Quartz Thread Execution Parallel or Sequential?

  - by vikas

  We have a quartz based scheduler application which runs about 1000 jobs per minute which are evenly distributed across seconds of each minute i.e. about 16-17 jobs per second. Ideally, these 16-17 jobs should fire at same time, however our first statement, which simply logs the time of execution, of execute method of the job is being called very late. e.g. let us assume we have 1000 jobs scheduled per minute from 05:00 to 05:04. So, ideally the job which is scheduled at 05:03:50 should have logged the first statement of the execute method at 05:03:50, however, it is doing it at about 05:06:38. I have tracked down the time taken by the scheduled job which comes around 15-20 milliseconds. This scheduled job is fast enough because we just send a message on an ActiveMQ queue. We have specified the number of threads of quartz to be 100 and even tried with increasing it to 200 and more, but no gain. One more thing we noticed is that logs from scheduler are coming sequential after first 1 minute i.e. [Quartz_Worker_28] <Some log statement> .. .. [Quartz_Worker_29] <Some log statement> .. .. [Quartz_Worker_30] <Some log statement> .. .. So it suggesting that after some time quartz is running threads almost sequential. May be this is happening due to the time taken in notifying the job completion to persistence store (which is a separate postgres database in this case) and/or context switching. What can be the reason behind this strange behavior? EDIT: More detailed Log [06/07/12 10:08:37:192][QuartzScheduler_Worker-34][INFO] org.quartz.plugins.history.LoggingTriggerHistoryPlugin - Trigger [<trigger_name>] fired job [<job_name>] scheduled at: 06-07-2012 10:08:33.458, next scheduled at: 06-07-2012 10:34:53.000 [06/07/12 10:08:37:192][QuartzScheduler_Worker-34][INFO] <my_package>.scheduler.quartz.ScheduledLocateJob - execute begin--------- ScheduledLocateJob with key: <job_name> started at Fri Jul 06 10:08:37 EDT 2012 [06/07/12 10:08:37:192][QuartzScheduler_Worker-34][INFO] <my_package>.scheduler.quartz.ScheduledLocateJob <some log statement> [06/07/12 10:08:37:192][QuartzScheduler_Worker-34][INFO] <my_package>.scheduler.quartz.ScheduledLocateJob <some log statement> [06/07/12 10:08:37:192][QuartzScheduler_Worker-34][INFO] <my_package>.scheduler.quartz.ScheduledLocateJob <some log statement> [06/07/12 10:08:37:220][QuartzScheduler_Worker-34][INFO] <my_package>.scheduler.quartz.ScheduledLocateJob - execute end--------- ScheduledLocateJob with key: <job_name> ended at Fri Jul 06 10:08:37 EDT 2012 [06/07/12 10:08:37:220][QuartzScheduler_Worker-34][INFO] org.quartz.plugins.history.LoggingTriggerHistoryPlugin - Trigger [<trigger_name>] completed firing job [<job_name>] with resulting trigger instruction code: DO NOTHING. Next scheduled at: 06-07-2012 10:34:53.000 I am doubting on this section of the above log scheduled at: 06-07-2012 10:08:33.458, next scheduled at: 06-07-2012 10:34:53.000 because this job was scheduled for 10:04:53, but it fired at 10:08:33 and still quartz didn't consider it as misfire. Shouldn't it be a misfire?

  Read the article

• Dynamically sized UIWebView in a UITableViewCell with auto layout - constraint violation

  - by Orion Edwards

  I've got a UITableViewCell which contains a UIWebView. The table view cell adjusts it's height depending on the web view contents. I've got it all working fine, however when the view loads, I get a constraint violation exception in the debugger (the app continues running and functionally works fine, but I'd like to resolve this exception if possible). How I've got it set up: The TableView sets the cell height like this: -(CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath { if(indexPath.section == 0) { [_topCell layoutIfNeeded]; CGFloat finalHeight = [_topCell.contentView systemLayoutSizeFittingSize:UILayoutFittingCompressedSize].height; return finalHeight + 1; } The cell constraints are as follows: Arbitrary 7px offset from the cell's contentView (top) to the webView Web view has arbitrary fixed height constraint of 62px (will expand later once content loads) Arbitrary 8px offset from the webView to the cell's contentView (bottom) in my viewDidLoad, I tell the webView to go and load a URL, and in the webViewDidFinishLoad, I update the web view height constraint, like this -(void)webViewDidFinishLoad:(UIWebView *)webView { CGSize fittingSize = [webView sizeThatFits:CGSizeZero]; // fittingSize is approx 500 [self.tableView beginUpdates]; // Exceptions happen on the following line setting the constant _topCell.webViewHeightConstraint.constant = fittingSize.height; [_topCell layoutSubviews]; [self.tableView endUpdates]; } The exception looks like this: Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. (Note: If you're seeing NSAutoresizingMaskLayoutConstraints that you don't understand, refer to the documentation for the UIView property translatesAutoresizingMaskIntoConstraints) ( "<NSLayoutConstraint:0x10964b250 V:[webView(62)] (Names: webView:0x109664a00 )>", "<NSLayoutConstraint:0x109243d30 V:|-(7)-[webView] (Names: webView:0x109664a00, cellContent:0x1092436f0, '|':cellContent:0x1092436f0 )>", "<NSLayoutConstraint:0x109243f80 V:[webView]-(8)-| (Names: cellContent:0x1092436f0, webView:0x109664a00, '|':cellContent:0x1092436f0 )>", "<NSAutoresizingMaskLayoutConstraint:0x10967c210 h=--& v=--& V:[cellContent(78)] (Names: cellContent:0x1092436f0 )>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x10964b250 V:[webView(62)] (Names: webView:0x109664a00 )> This seems a bit weird. It's implied that the constraint which sets the height of the web view is going to be broken, however the web view does get it's height correctly set, and the tableview renders perfectly well. From my guesses, it looks like the newly increased web view height constraint (it's about 500px after the web view loads) is going to conflict with the <NSAutoresizingMaskLayoutConstraint:0x10967c210 h=--& v=--& V:[cellContent(78)] setting the cell height to 78 (put there by interface builder). This makes sense, however I don't want that cell content to have a fixed height of 78px, I want it to increase it's height, and functionally, it actually does this, just with these exceptions. I've tried setting _topCell.contentView.translatesAutoresizingMaskIntoConstraints = NO; to attempt to remove the NSAutoresizingMaskLayoutConstraint - this stops the exceptions, but then all the other layout is screwed up and the web view is about 10px high in the middle of the table view for no reason. I've also tried setting _topCell.contentView.autoresizingMask |= UIViewAutoresizingFlexibleHeight; in the viewDidLoad to hopefully affect the contentView 78px height constraint, but this has no effect Any help would be much appreciated

  Read the article

• CSS: Labels in table columns

  - by hello

  Hello. BACKGROUND: I would like to have small labels in columns of a table. I'm using some implemented parts of HTML5/CSS3 in my project, and this section specifically is for mobile devices. While both facts are not necessarily relevant, the bottom line is that I don't have to support Internet Explorer or even Firefox for that matter (just WebKit). THE PROBLEM With my current CSS approach, the vertical padding of the cell comes from the <span element (set to display: block with top/bottom margins), which contains the "value" of the column. As a result there's no padding when the <span> is empty or missing (no value) and the label is not in place. The "full" coulmns should give you the idea of where I want the labels to be, even if there's no value, and the <span> is not there. I realize that I could use "non-breaking-space", but I would really like to avoid it. I wonder if any of you have a fix / better way to do this? current code is below. Thank you for any help. <!DOCTYPE html> <html lang="en"> <head> <title>ah</title> <style> body { width: 320px; } /* TABLE */ table { width: 100%; border-collapse: collapse; font-family: arial; } th, td { border: 1px solid #ccc; border-width: 0px 0px 1px 1px; } th:last-child, td:last-child { border-right-width: 1px; } tr:first-child th { border-top-width: 1px; background: #efefef; } /* RELEVANT STUFF */ td { padding: 3px; } td sup { display: block; } td span { display: block; margin: 3px 0px; text-align: center; } </style> </head> <body> <table> <tr> <th colspan="3">something</th> </tr> <tr> <td>^{some label}<span>any content</span></td> <td>^{some label}<span>any content</span></td> <td>^{some label}<span></span></td><!-- No content, just a label --> </tr> </table> </body> </html>

  Read the article

• How to make sure that grub does use menu.lst?

  - by Glen S. Dalton

  On my Ubuntu 9.04 ("Karmic") laptop I suspect grub does not use the /boot/grub/menu.lst file. What happens on boot is that I see a blank screen and nothing happens. When I press ESC I see a boot list which is different from what I would expect from the menu.lst file. The menu lines are different and when I choose the first entry it does not use the kernel options that are in the first entry in menu.lst. Where do the entries that grub uses come from? How can I find out what happens, is there a log? I could not find anything in /var/log/syslog or /var/log/dmesg about grub using a menu.lst. How can I set it to work like expected? Some Files: $ sudo ls -la /boot/grub/*lst -rw-r--r-- 1 root root 1558 2009-12-12 15:25 /boot/grub/command.lst -rw-r--r-- 1 root root 121 2009-12-12 15:25 /boot/grub/fs.lst -rw-r--r-- 1 root root 272 2009-12-12 15:25 /boot/grub/handler.lst -rw-r--r-- 1 root root 4576 2010-03-19 11:26 /boot/grub/menu.lst -rw-r--r-- 1 root root 1657 2009-12-12 15:25 /boot/grub/moddep.lst -rw-r--r-- 1 root root 62 2009-12-12 15:25 /boot/grub/partmap.lst -rw-r--r-- 1 root root 22 2009-12-12 15:25 /boot/grub/parttool.lst $ sudo ls -la /vm* lrwxrwxrwx 1 root root 30 2009-12-12 16:15 /vmlinuz -> boot/vmlinuz-2.6.31-16-generic lrwxrwxrwx 1 root root 30 2009-12-12 14:07 /vmlinuz.old -> boot/vmlinuz-2.6.31-14-generic $ sudo ls -la /init* lrwxrwxrwx 1 root root 33 2009-12-12 16:15 /initrd.img -> boot/initrd.img-2.6.31-16-generic lrwxrwxrwx 1 root root 33 2009-12-12 14:07 /initrd.img.old -> boot/initrd.img-2.6.31-14-generic The only menu.lst that I found: $ sudo find / -name "menu.lst" /boot/grub/menu.lst $ sudo cat /boot/grub/menu.lst # menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not use 'savedefault' or your # array will desync and will not let you boot your system. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 3 ## hiddenmenu # Hides the menu by default (press ESC to see the menu) #hiddenmenu # Pretty colours color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=UUID=9b454298-18e1-43f7-a5bc-f56e7ed5f9c6 ro noresume ## default grub root device ## e.g. groot=(hd0,0) # groot=70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 ## defoptions=quiet splash # defoptions=apm=on acpi=off ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(recovery) single # altoptions=(recovery mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## specify if running in Xen domU or have grub detect automatically ## update-grub will ignore non-xen kernels when running in domU and vice versa ## e.g. indomU=detect ## indomU=true ## indomU=false # indomU=detect ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## should update-grub add savedefault to the default options ## can be true or false # savedefault=false ## ## End Default Options ## title Ubuntu 9.10, kernel 2.6.31-14-generic noresume uuid 70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf kernel /vmlinuz-2.6.31-14-generic root=UUID=9b454298-18e1-43f7-a5bc-f56e7ed5f9c6 ro quiet splash apm=on acpi=off noresume initrd /initrd.img-2.6.31-14-generic title Ubuntu 9.10, kernel 2.6.31-14-generic (recovery mode) uuid 70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf kernel /vmlinuz-2.6.31-14-generic root=UUID=9b454298-18e1-43f7-a5bc-f56e7ed5f9c6 ro sing le initrd /initrd.img-2.6.31-14-generic title Ubuntu 9.10, memtest86+ uuid 70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf kernel /memtest86+.bin ### END DEBIAN AUTOMAGIC KERNELS LIST These are the choices that grub displays after i press ESC: Ubuntu, Linux 2-6-31-16-generic Ubuntu, Linux 2-6-31-16-generic (recovery mode) Ubuntu, Linux 2-6-31-14-generic Ubuntu, Linux 2-6-31-14-generic (recovery mode) Memory test (memtest86+) Memory test (memtest86+, serial console 115200)

  Read the article

• .NET Exception error, what does this error means?

  - by gsvirdi

  I've tried to develop a simple winform utility which is using xml file as its database. I've used VS 2008 express edition, C#. When this utility tries to write into the xml file then this error is displayed on other computer. I've tried to provide System.Xml.dll & System.Xml.Linq.dll in the same folder on the other computer but no use. What does it means? Any solution? See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.MissingMethodException: Method not found: 'Void System.Xml.XmlReaderSettings.set_MaxCharactersFromEntities(Int64)'. at System.Xml.Linq.XNode.GetXmlReaderSettings(LoadOptions o) at System.Xml.Linq.XDocument.Load(String uri, LoadOptions options) at System.Xml.Linq.XDocument.Load(String uri) at Issues.Form1.button1_Click(Object sender, EventArgs e) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ButtonBase.WndProc(Message& m) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ************** Loaded Assemblies ************** mscorlib Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll ---------------------------------------- Issues Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/Documents%20and%20Settings/sumsnl.LTSLFBD/Desktop/Process%20Improvement/Issues%20Register/Issues.exe ---------------------------------------- System.Windows.Forms Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- System.Drawing Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll ---------------------------------------- System.Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- System.Configuration Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll ---------------------------------------- 4u_pgrmq Assembly Version: 1.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- ************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: <configuration> <system.windows.forms jitDebugging="true" /> </configuration> When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.

  Read the article

• Wordpress > Custom wp-archives list by year and category with post count in sidebar

  - by David

  So I have been trying to add a custom sidebar archives section to this Wordpress Theme. I am trying to get two separate yearly archive sections, one for category A and one for category B. I need to get a post count and display it as well, to the left of "articles". This is the format I have been trying to get in the sidebar: Category 1 2010 - 5 articles 2009 - 4 articles 2008 - 6 articles 2007 - 5 articles Category 2 2010 - 8 articles 2009 - 3 articles 2008 - 7 articles 2007 - 5 articles This code is pulling the yearly archive, but the links to the yearly archives do not filter by category. However, if Category 1 does not have posts in 2008, 2008 would not show. So I feel like I am really close, but there is something wrong here in the code. I have also been unsuccessful in pulling the post count for the year/category either. Here is what I get: Category 1 2010 - articles (these links all take you to the general yearly archive page, not category specific) 2009 - articles 2007 - articles Category 2 2010 - articles 2009 - articles 2008 - articles 2007 - articles Here is are the functions I am using in my functions.php file, any idea what I am doing wrong? <?php function company_below_sidebar() { global $cat; ?> <div id="press"> <h2>Press</h2> <ul><?php $cat = '1'; wp_get_archives('type=yearly') ?></ul> </div> <div id="news"> <h2>News</h2> <ul><?php $cat = '4'; wp_get_archives('type=yearly') ?></ul> </div> <?php } add_action('thematic_betweenmainasides', 'company_below_sidebar'); function customarchives_join( $x ) { global $wpdb; return $x . " INNER JOIN $wpdb->term_relationships ON ($wpdb->posts.ID = $wpdb- >term_relationships.object_id) INNER JOIN $wpdb->term_taxonomy ON ($wpdb->term_relationships.term_taxonomy_id = $wpdb->term_taxonomy.term_taxonomy_id)"; } function customarchives_where( $x ) { global $wpdb; global $cat; return $x . " AND $wpdb->term_taxonomy.taxonomy = 'category' AND $wpdb->term_taxonomy.term_id IN ($cat)"; } add_filter( 'getarchives_where', 'customarchives_where' ); add_filter( 'getarchives_join', 'customarchives_join' ); function company_monthly_archive_flexible($input) { // Get URL from $input preg_match('(((f|ht){1}tp://)[-a-zA-Z0-9@:%_\+.~#?&;//=]+)', $input, $matches); $url = $matches[0]; // Get content from $input (without the tags) $content = trim(strip_tags($input)); // Seperate each date element and put it in an array $dates = explode(" ", $content); // Get year $year = $dates[0]; // Customize output format $format = "<li><a href='$url'><b>$year -</b> articles</a></li>\n"; echo $format; } add_filter('get_archives_link','company_monthly_archive_flexible'); ?>

  Read the article

• jquery Uncaught SyntaxError: Unexpected token )

  - by js00831

  I am getting a jquery error in my code... can you guys tell me whats the reason for this when you click the united states red color button in this link you will see this error http://jsfiddle.net/SSMX4/88/embedded/result/ function checkCookie(){ var cookie_locale = readCookie('desired-locale'); var show_blip_count = readCookie('show_blip_count'); var tesla_locale = 'en_US'; //default to US var path = window.location.pathname; // debug.log("path = " + path); var parsed_url = parseURL(window.location.href); var path_array = parsed_url.segments; var path_length = path_array.length var locale_path_index = -1; var locale_in_path = false; var locales = ['en_AT', 'en_AU', 'en_BE', 'en_CA', 'en_CH', 'de_DE', 'en_DK', 'en_GB', 'en_HK', 'en_EU', 'jp', 'nl_NL', 'en_US', 'it_IT', 'fr_FR', 'no_NO'] // see if we are on a locale path $.each(locales, function(index, value){ locale_path_index = $.inArray(value, path_array); if (locale_path_index != -1) { tesla_locale = value == 'jp' ? 'ja_JP':value; locale_in_path = true; } }); // debug.log('tesla_locale = ' + tesla_locale); cookie_locale = (cookie_locale == null || cookie_locale == 'null') ? false:cookie_locale; // Only do the js redirect on the static homepage. if ((path_length == 1) && (locale_in_path || path == '/')) { debug.log("path in redirect section = " + path); if (cookie_locale && (cookie_locale != tesla_locale)) { // debug.log('Redirecting to cookie_locale...'); var path_base = ''; switch (cookie_locale){ case 'en_US': path_base = path_length > 1 ? path_base:'/'; break; case 'ja_JP': path_base = '/jp' break; default: path_base = '/' + cookie_locale; } path_array = locale_in_path != -1 ? path_array.slice(locale_in_path):path_array; path_array.unshift(path_base); window.location.href = path_array.join('/'); } } // only do the ajax call if we don't have a cookie if (!cookie_locale) { // debug.log('doing the cookie check for locale...') cookie_locale = 'null'; var get_data = {cookie:cookie_locale, page:path, t_locale:tesla_locale}; var query_country_string = parsed_url.query != '' ? parsed_url.query.split('='):false; var query_country = query_country_string ? (query_country_string.slice(0,1) == '?country' ? query_country_string.slice(-1):false):false; if (query_country) { get_data.query_country = query_country; } $.ajax({ url:'/check_locale', data:get_data, cache: false, dataType: "json", success: function(data){ var ip_locale = data.locale; var market = data.market; var new_locale_link = $('#locale_pop #locale_link'); if (data.show_blip && show_blip_count < 3) { setTimeout(function(){ $('#locale_msg').text(data.locale_msg); $('#locale_welcome').text(data.locale_welcome); new_locale_link[0].href = data.new_path; new_locale_link.text(data.locale_link); new_locale_link.attr('rel', data.locale); if (!new_locale_link.hasClass(data.locale)) { new_locale_link.addClass(data.locale); } $('#locale_pop').slideDown('slow', function(){ var hide_blip = setTimeout(function(){ $('#locale_pop').slideUp('slow', function(){ var show_blip_count = readCookie('show_blip_count'); if (!show_blip_count) { createCookie('show_blip_count',1,360); } else if (show_blip_count < 3 ) { var b_count = show_blip_count; b_count ++; eraseCookie('show_blip_count'); createCookie('show_blip_count',b_count,360); } }); },10000); $('#locale_pop').hover(function(){ clearTimeout(hide_blip); },function(){ setTimeout(function(){$('#locale_pop').slideUp();},10000); }); }); },1000); } } }); } }

  Read the article

• Xen DomU on DRBD device: barrier errors

  - by Halfgaar

  I'm testing setting up a Xen DomU with a DRBD storage for easy failover. Most of the time, immediatly after booting the DomU, I get an IO error: [ 3.153370] EXT3-fs (xvda2): using internal journal [ 3.277115] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.336014] nf_conntrack version 0.5.0 (3899 buckets, 15596 max) [ 3.515604] init: failsafe main process (397) killed by TERM signal [ 3.801589] blkfront: barrier: write xvda2 op failed [ 3.801597] blkfront: xvda2: barrier or flush: disabled [ 3.801611] end_request: I/O error, dev xvda2, sector 52171168 [ 3.801630] end_request: I/O error, dev xvda2, sector 52171168 [ 3.801642] Buffer I/O error on device xvda2, logical block 6521396 [ 3.801652] lost page write due to I/O error on xvda2 [ 3.801755] Aborting journal on device xvda2. [ 3.804415] EXT3-fs (xvda2): error: ext3_journal_start_sb: Detected aborted journal [ 3.804434] EXT3-fs (xvda2): error: remounting filesystem read-only [ 3.814754] journal commit I/O error [ 6.973831] init: udev-fallback-graphics main process (538) terminated with status 1 [ 6.992267] init: plymouth-splash main process (546) terminated with status 1 The manpage of drbdsetup says that LVM (which I use) doesn't support barriers (better known as tagged command queuing or native command queing), so I configured the drbd device not to use barriers. This can be seen in /proc/drbd (by "wo:f, meaning flush, the next method drbd chooses after barrier): 3: cs:Connected ro:Primary/Secondary ds:UpToDate/UpToDate C r---- ns:2160152 nr:520204 dw:2680344 dr:2678107 al:3549 bm:9183 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:0 And on the other host: 3: cs:Connected ro:Secondary/Primary ds:UpToDate/UpToDate C r---- ns:0 nr:2160152 dw:2160152 dr:0 al:0 bm:8052 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:0 I also enabled the option disable_sendpage, as per the drbd docs: cat /sys/module/drbd/parameters/disable_sendpage Y I also tried adding barriers=0 to fstab as mount option. Still it sometimes says: [ 58.603896] blkfront: barrier: write xvda2 op failed [ 58.603903] blkfront: xvda2: barrier or flush: disabled I don't even know if ext3 has a nobarrier option. And, because only one of my storage systems is battery backed, it would not be smart anyway. Why does it still compain about barriers when I disabled that? Both host are: Debian: 6.0.4 uname -a: Linux 2.6.32-5-xen-amd64 drbd: 8.3.7 Xen: 4.0.1 Guest: Ubuntu 12.04 LTS uname -a: Linux 3.2.0-24-generic pvops drbd resource: resource drbdvm { meta-disk internal; device /dev/drbd3; startup { # The timeout value when the last known state of the other side was available. 0 means infinite. wfc-timeout 0; # Timeout value when the last known state was disconnected. 0 means infinite. degr-wfc-timeout 180; } syncer { # This is recommended only for low-bandwidth lines, to only send those # blocks which really have changed. #csums-alg md5; # Set to about half your net speed rate 60M; # It seems that this option moved to the 'net' section in drbd 8.4. (later release than Debian has currently) verify-alg md5; } net { # The manpage says this is recommended only in pre-production (because of its performance), to determine # if your LAN card has a TCP checksum offloading bug. #data-integrity-alg md5; } disk { # Detach causes the device to work over-the-network-only after the # underlying disk fails. Detach is not default for historical reasons, but is # recommended by the docs. # However, the Debian defaults in drbd.conf suggest the machine will reboot in that event... on-io-error detach; # LVM doesn't support barriers, so disabling it. It will revert to flush. Check wo: in /proc/drbd. If you don't disable it, you get IO errors. no-disk-barrier; } on host1 { # universe is a VG disk /dev/universe/drbdvm-disk; address 10.0.0.1:7792; } on host2 { # universe is a VG disk /dev/universe/drbdvm-disk; address 10.0.0.2:7792; } } DomU cfg: bootloader = '/usr/lib/xen-default/bin/pygrub' vcpus = '2' memory = '512' # # Disk device(s). # root = '/dev/xvda2 ro' disk = [ 'phy:/dev/drbd3,xvda2,w', 'phy:/dev/universe/drbdvm-swap,xvda1,w', ] # # Hostname # name = 'drbdvm' # # Networking # # fake IP for posting vif = [ 'ip=1.2.3.4,mac=00:16:3E:22:A8:A7' ] # # Behaviour # on_poweroff = 'destroy' on_reboot = 'restart' on_crash = 'restart' In my test setup: the primary host's storage is 9650SE SATA-II RAID PCIe with battery. The secondary is software RAID1. Isn't DRBD+Xen widely used? With these problems, it's not going to work.

  Read the article

< Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >