Search Results

Search found 6178 results on 248 pages for 'section'.

Page 234/248 | < Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >

• Bug Triage

  In this blog post brain dump, I'll attempt to describe the process my team tries to follow when dealing with new bug reports (specifically, code defect reports). This is not official Microsoft policy, just the way we do things… if you do things differently and want to share, you can do so at the bottom in the comments (or on your blog).Feature Triage TeamA subset of the feature crew, the triage team (which has representations from the PM, Dev and QA disciplines), looks at all unassigned bugs at regular intervals. This can be weekly or daily (or other frequency) dependent on which part of the product cycle we are in and what the untriaged bug load looks like. They discuss each bug considering the evidence and make a decision of whether the bug goes from Not Yet Assigned to Assigned (plus the name of the DEV to fix this) or whether it goes from Active to Resolved (which means it gets assigned back to the requestor for closure or further debate if they were not present at the triage meeting). Close to critical milestones, the feature triage team needs to further justify bugs they take to additional higher-level triage teams.Bug Opened = Not Yet AssignedSomeone (typically an SDET from the QA team) creates the bug item (e.g. in TFS), ensuring they populate all the relevant fields including: Title, Description, Repro Steps (including the Actual Result at the end of the steps), attachments of code and/or screenshots, Build number that they observed the issue in, regression details if applicable, how it was found, if a test case exists or needs to be created etc. They also indicate their opinion on the Priority and Severity. The bug status is left as Not Yet Assigned."Issue" versus "Fix for issue"The solution to some bugs is easy to determine, e.g. "bug: the column name is misspelled". Obviously the fix is to correct the spelling – still, the triage team should be explicit and enter the correct spelling in the bug's Description. Note that a bad bug name here would be "bug: fix the spelling of the column" (it describes the solution, rather than the problem).Other solutions are trickier to establish, e.g. "bug: the column header is not accessible (can only be clicked on with the mouse, not reached via keyboard)". What is the correct solution here? The last thing to do is leave this undetermined and just assign it to a developer. The solution has to be entered in the description. Behind this type of a bug usually hides a spec defect or a new feature request.The person opening the bug should focus on describing the issue, rather than the solution. The person indicates what the fix is in their opinion by stating the Expected Result (immediately after stating the Actual Result). If they have a complex suggested solution, that should be split out in a separate part, but the triage team has the final say before assigning it. If the solution is lengthy/complicated to describe, the bug can be assigned to the PM. Note: the strict interpretation suggests that any bug with no clear, obvious solution is always a hole in the spec and should always go to the PM. This also ensures the spec gets updated.Not Yet Assigned - Not Yet Assigned (on someone else's plate)If the bug is observed in our feature, but the cause is actually another team, we change the Area Path (which is the way we identify teams in TFS) and leave it as Not Yet Assigned. The triage team may add more comments as appropriate including potentially changing the repro steps. In some cases, we may even resolve the bug in our area path and open a new bug in the area path of the other team.Even though there is no action on a dev on the team, the bug still needs to be tracked. One way of doing this is to implement some notification system that informs the team when the tracked bug changed status; another way is to occasionally run a global query (against all area paths) for bugs that have been opened by a member of the team and follow up with the current owners for stale bugs.Not Yet Assigned - ResolvedThis state transition can only be made by the Feature Triage Team.0. Sometimes the bug description is not clear and in that case it gets Resolved as More Information Needed, so the original requestor can provide it.After understanding what the bug item is about, the first decision is to determine whether it needs to go to a dev.1. If it is a known bug, it gets resolved as "Duplicate" and linked to the existing bug.2. If it is "By Design" it gets resolved as such, indicating that the triage team does not think this is a bug.3. If the bug does not repro on latest bits, it is resolved as "No Repro"4. The most painful: If it is decided that we cannot fix it for this release it gets resolved as "Postponed" or "Won't Fix". The former is typically due to resources and time constraints, while the latter is due to deciding that it is not important enough to consume our resources in any release (yes, not all bugs must be fixed!). For both cases, there are other factors that contribute to the decision such as: existence of a reasonable workaround, frequency we expect users to encounter the issue, dependencies on other team to offer a solution, whether it breaks a core scenario, whether it prohibits customer feedback on a major feature, is it a regression from a previous release, impact of the fix on other partner teams (e.g. User Education, User Experience, Localization/Globalization), whether this is the right fix, does the fix impact performance goals, and last but not least, severity of bug (e.g. loss of customer data, security threat, crash, hang). The bar for fixing a bug goes up as the release date approaches. The triage team becomes hardnosed about which bugs to take, while the developers are busy resolving assigned bugs thus everyone drives for Zero Bug Bounce (ZBB). ZBB is when you have 0 active bugs older than 48 hours.Not Yet Assigned - AssignedIf the bug is something we decide to fix in this release and the solution is known, then it is assigned to a DEV. This is either the developer that will do the work, or a Lead that can further assign it to one of his developer team based on a load balancing algorithm of their choosing.Sometimes, the triage team needs the dev to do some investigation work before deciding whether to take the fix; similarly, the checkin for the fix may be gated on code review by the triage team. In these cases, these instructions are provided in the comments section of the bug and when the developer is done they notify the triage team for final decision.Additionally, a Priority and Severity (from 0 to 4) has to be entered, e.g. a P0 means "drop anything you are doing and fix this now" whereas a P4 is something you get to after all P0,1,2,3 bugs are fixed.From a testing perspective, if the bug was found through ad-hoc testing or an external team, the decision is made whether test cases should be added to avoid future regressions. This is communicated to the QA team.Assigned - ResolvedWhen the developer receives the bug (they should be checking daily for new bugs on their plate looking at bugs in order of priority and from older to newer) they can send it back to triage if the information is not clear. Otherwise, they investigate the bug, setting the Sub Status to "Investigating"; if they cannot make progress, they set the Sub Status to "Blocked" and discuss this with triage or whoever else can help them get unblocked. Once they are unblocked, they set the Sub Status to "Working on Solution"; once they are code complete they send a code review request, setting the Sub Status to "Fix Available". After the iterative code review process is over and everyone is happy with the fix, the developer checks it in and changes the state of the bug from Active (and Assigned to them) to Resolved (and Assigned to someone else).The developer needs to ensure that when the status is changed to Resolved that it is assigned to a QA person. For example, maybe the PM opened the bug, but it should be a QA person that will verify the fix - the developer needs to manually change the assignee in that case. Typically the QA person will send an email to the original requestor notifying them that the fix is verified.Resolved - ??In all cases above, note that the final state was Resolved. What happens after that? The final step should be Closed. The bug is closed once the QA person verifying the fix is happy with it. If the person is not happy, then they change the state from Resolved to Active, thus sending it back to the developer. If the developer and QA person cannot reach agreement, then triage can be brought into it. An easy way to do that is change the status back to Not Yet Assigned with appropriate comments so the triage team can re-review.It is important to note that only QA can close a bug. That means that if the opener of the bug was a PM, when the bug gets resolved by the dev it may land on the PM's plate and after a quick review, the PM would re-assign to an SDET, which is the only role that can close bugs. One exception to this is if the person that filed the bug is external: in that case, we leave it Resolved and assigned to them and also send them a notification that they need to verify the fix. Another exception is if specialized developer knowledge is needed for verifying the bug fix (e.g. it was a refactoring suggestion bug typically not observable by the user) in which case it is fine to have a developer verify the fix, and ideally a different developer to the one that opened the bug.Other links on bug triageA quick search reveals that others have talked about this subject, e.g. here, here, here, here and here.Your take?If you have other best practices your team uses to deal with incoming bug reports, feel free to share in the comments below or on your blog. Comments about this post welcome at the original blog.

  Read the article

• Creating a dynamic proxy generator with c# – Part 4 – Calling the base method

  - by SeanMcAlinden

  Creating a dynamic proxy generator with c# – Part 1 – Creating the Assembly builder, Module builder and caching mechanism Creating a dynamic proxy generator with c# – Part 2 – Interceptor Design Creating a dynamic proxy generator with c# – Part 3 – Creating the constructors   The plan for calling the base methods from the proxy is to create a private method for each overridden proxy method, this will allow the proxy to use a delegate to simply invoke the private method when required. Quite a few helper classes have been created to make this possible so as usual I would suggest download or viewing the code at http://rapidioc.codeplex.com/. In this post I’m just going to cover the main points for when creating methods. Getting the methods to override The first two notable methods are for getting the methods. private static MethodInfo[] GetMethodsToOverride<TBase>() where TBase : class {     return typeof(TBase).GetMethods().Where(x =>         !methodsToIgnore.Contains(x.Name) &&                              (x.Attributes & MethodAttributes.Final) == 0)         .ToArray(); } private static StringCollection GetMethodsToIgnore() {     return new StringCollection()     {         "ToString",         "GetHashCode",         "Equals",         "GetType"     }; } The GetMethodsToIgnore method string collection contains an array of methods that I don’t want to override. In the GetMethodsToOverride method, you’ll notice a binary AND which is basically saying not to include any methods marked final i.e. not virtual. Creating the MethodInfo for calling the base method This method should hopefully be fairly easy to follow, it’s only function is to create a MethodInfo which points to the correct base method, and with the correct parameters. private static MethodInfo CreateCallBaseMethodInfo<TBase>(MethodInfo method) where TBase : class {     Type[] baseMethodParameterTypes = ParameterHelper.GetParameterTypes(method, method.GetParameters());       return typeof(TBase).GetMethod(        method.Name,        BindingFlags.Instance | BindingFlags.Public | BindingFlags.NonPublic,        null,        baseMethodParameterTypes,        null     ); }   /// <summary> /// Get the parameter types. /// </summary> /// <param name="method">The method.</param> /// <param name="parameters">The parameters.</param> public static Type[] GetParameterTypes(MethodInfo method, ParameterInfo[] parameters) {     Type[] parameterTypesList = Type.EmptyTypes;       if (parameters.Length > 0)     {         parameterTypesList = CreateParametersList(parameters);     }     return parameterTypesList; }   Creating the new private methods for calling the base method The following method outline how I’ve created the private methods for calling the base class method. private static MethodBuilder CreateCallBaseMethodBuilder(TypeBuilder typeBuilder, MethodInfo method) {     string callBaseSuffix = "GetBaseMethod";       if (method.IsGenericMethod || method.IsGenericMethodDefinition)     {                         return MethodHelper.SetUpGenericMethod             (                 typeBuilder,                 method,                 method.Name + callBaseSuffix,                 MethodAttributes.Private | MethodAttributes.HideBySig             );     }     else     {         return MethodHelper.SetupNonGenericMethod             (                 typeBuilder,                 method,                 method.Name + callBaseSuffix,                 MethodAttributes.Private | MethodAttributes.HideBySig             );     } } The CreateCallBaseMethodBuilder is the entry point method for creating the call base method. I’ve added a suffix to the base classes method name to keep it unique. Non Generic Methods Creating a non generic method is fairly simple public static MethodBuilder SetupNonGenericMethod(     TypeBuilder typeBuilder,     MethodInfo method,     string methodName,     MethodAttributes methodAttributes) {     ParameterInfo[] parameters = method.GetParameters();       Type[] parameterTypes = ParameterHelper.GetParameterTypes(method, parameters);       Type returnType = method.ReturnType;       MethodBuilder methodBuilder = CreateMethodBuilder         (             typeBuilder,             method,             methodName,             methodAttributes,             parameterTypes,             returnType         );       ParameterHelper.SetUpParameters(parameterTypes, parameters, methodBuilder);       return methodBuilder; }   private static MethodBuilder CreateMethodBuilder (     TypeBuilder typeBuilder,     MethodInfo method,     string methodName,     MethodAttributes methodAttributes,     Type[] parameterTypes,     Type returnType ) { MethodBuilder methodBuilder = typeBuilder.DefineMethod(methodName, methodAttributes, returnType, parameterTypes); return methodBuilder; } As you can see, you simply have to declare a method builder, get the parameter types, and set the method attributes you want.   Generic Methods Creating generic methods takes a little bit more work. /// <summary> /// Sets up generic method. /// </summary> /// <param name="typeBuilder">The type builder.</param> /// <param name="method">The method.</param> /// <param name="methodName">Name of the method.</param> /// <param name="methodAttributes">The method attributes.</param> public static MethodBuilder SetUpGenericMethod     (         TypeBuilder typeBuilder,         MethodInfo method,         string methodName,         MethodAttributes methodAttributes     ) {     ParameterInfo[] parameters = method.GetParameters();       Type[] parameterTypes = ParameterHelper.GetParameterTypes(method, parameters);       MethodBuilder methodBuilder = typeBuilder.DefineMethod(methodName,         methodAttributes);       Type[] genericArguments = method.GetGenericArguments();       GenericTypeParameterBuilder[] genericTypeParameters =         GetGenericTypeParameters(methodBuilder, genericArguments);       ParameterHelper.SetUpParameterConstraints(parameterTypes, genericTypeParameters);       SetUpReturnType(method, methodBuilder, genericTypeParameters);       if (method.IsGenericMethod)     {         methodBuilder.MakeGenericMethod(genericArguments);     }       ParameterHelper.SetUpParameters(parameterTypes, parameters, methodBuilder);       return methodBuilder; }   private static GenericTypeParameterBuilder[] GetGenericTypeParameters     (         MethodBuilder methodBuilder,         Type[] genericArguments     ) {     return methodBuilder.DefineGenericParameters(GenericsHelper.GetArgumentNames(genericArguments)); }   private static void SetUpReturnType(MethodInfo method, MethodBuilder methodBuilder, GenericTypeParameterBuilder[] genericTypeParameters) {     if (method.IsGenericMethodDefinition)     {         SetUpGenericDefinitionReturnType(method, methodBuilder, genericTypeParameters);     }     else     {         methodBuilder.SetReturnType(method.ReturnType);     } }   private static void SetUpGenericDefinitionReturnType(MethodInfo method, MethodBuilder methodBuilder, GenericTypeParameterBuilder[] genericTypeParameters) {     if (method.ReturnType == null)     {         methodBuilder.SetReturnType(typeof(void));     }     else if (method.ReturnType.IsGenericType)     {         methodBuilder.SetReturnType(genericTypeParameters.Where             (x => x.Name == method.ReturnType.Name).First());     }     else     {         methodBuilder.SetReturnType(method.ReturnType);     }             } Ok, there are a few helper methods missing, basically there is way to much code to put in this post, take a look at the code at http://rapidioc.codeplex.com/ to follow it through completely. Basically though, when dealing with generics there is extra work to do in terms of getting the generic argument types setting up any generic parameter constraints setting up the return type setting up the method as a generic All of the information is easy to get via reflection from the MethodInfo.   Emitting the new private method Emitting the new private method is relatively simple as it’s only function is calling the base method and returning a result if the return type is not void. ILGenerator il = privateMethodBuilder.GetILGenerator();   EmitCallBaseMethod(method, callBaseMethod, il);   private static void EmitCallBaseMethod(MethodInfo method, MethodInfo callBaseMethod, ILGenerator il) {     int privateParameterCount = method.GetParameters().Length;       il.Emit(OpCodes.Ldarg_0);       if (privateParameterCount > 0)     {         for (int arg = 0; arg < privateParameterCount; arg++)         {             il.Emit(OpCodes.Ldarg_S, arg + 1);         }     }       il.Emit(OpCodes.Call, callBaseMethod);       il.Emit(OpCodes.Ret); } So in the main method building method, an ILGenerator is created from the method builder. The ILGenerator performs the following actions: Load the class (this) onto the stack using the hidden argument Ldarg_0. Create an argument on the stack for each of the method parameters (starting at 1 because 0 is the hidden argument) Call the base method using the Opcodes.Call code and the MethodInfo we created earlier. Call return on the method   Conclusion Now we have the private methods prepared for calling the base method, we have reached the last of the relatively easy part of the proxy building. Hopefully, it hasn’t been too hard to follow so far, there is a lot of code so I haven’t been able to post it all so please check it out at http://rapidioc.codeplex.com/. The next section should be up fairly soon, it’s going to cover creating the delegates for calling the private methods created in this post.   Kind Regards, Sean.

  Read the article

• Visual Studio 2013 Static Code Analysis in depth: What? When and How?

  - by Hosam Kamel

  In this post I'll illustrate in details the following points What is static code analysis? When to use? Supported platforms Supported Visual Studio versions How to use Run Code Analysis Manually Run Code Analysis Automatically Run Code Analysis while check-in source code to TFS version control (TFSVC) Run Code Analysis as part of Team Build Understand the Code Analysis results & learn how to fix them Create your custom rule set Q & A References What is static Rule analysis? Static Code Analysis feature of Visual Studio performs static code analysis on code to help developers identify potential design, globalization, interoperability, performance, security, and a lot of other categories of potential problems according to Microsoft's rules that mainly targets best practices in writing code, and there is a large set of those rules included with Visual Studio grouped into different categorized targeting specific coding issues like security, design, Interoperability, globalizations and others. Static here means analyzing the source code without executing it and this type of analysis can be performed through automated tools (like Visual Studio 2013 Code Analysis Tool) or manually through Code Review which already supported in Visual Studio 2012 and 2013 (check Using Code Review to Improve Quality video on Channel9) There is also Dynamic analysis which performed on executing programs using software testing techniques such as Code Coverage for example. When to use? Running Code analysis tool at regular intervals during your development process can enhance the quality of your software, examines your code for a set of common defects and violations is always a good programming practice. Adding that Code analysis can also find defects in your code that are difficult to discover through testing allowing you to achieve first level quality gate for you application during development phase before you release it to the testing team. Supported platforms .NET Framework, native (C and C++) Database applications. Support Visual Studio versions All version of Visual Studio starting Visual Studio 2013 (except Visual Studio Test Professional) check Feature comparisons Create and modify a custom rule set required Visual Studio Premium or Ultimate. How to use? Code Analysis can be run manually at any time from within the Visual Studio IDE, or even setup to automatically run as part of a Team Build or check-in policy for Team Foundation Server. Run Code Analysis Manually To run code analysis manually on a project, on the Analyze menu, click Run Code Analysis on your project or simply right click on the project name on the Solution Explorer choose Run Code Analysis from the context menu Run Code Analysis Automatically To run code analysis each time that you build a project, you select Enable Code Analysis on Build on the project's Property Page Run Code Analysis while check-in source code to TFS version control (TFSVC) Team Foundation Version Control (TFVC) provides a way for organizations to enforce practices that lead to better code and more efficient group development through Check-in policies which are rules that are set at the team project level and enforced on developer computers before code is allowed to be checked in. (This is available only if you're using Team Foundation Server) Require permissions on Team Foundation Server: you must have the Edit project-level information permission set to Allow typically your account must be part of Project Administrators, Project Collection Administrators, for more information about Team Foundation permissions check http://msdn.microsoft.com/en-us/library/ms252587(v=vs.120).aspx In Team Explorer, right-click the team project name, point to Team Project Settings, and then click Source Control. In the Source Control dialog box, select the Check-in Policy tab. Click Add to create a new check-in policy. Double-click the existing Code Analysis item in the Policy Type list to change the policy. Check or Uncheck the policy option based on the configurations you need to perform as illustrated below: Enforce check-in to only contain files that are part of current solution: code analysis can run only on files specified in solution and project configuration files. This policy guarantees that all code that is part of a solution is analyzed. Enforce C/C++ Code Analysis (/analyze): Requires that all C or C++ projects be built with the /analyze compiler option to run code analysis before they can be checked in. Enforce Code Analysis for Managed Code: Requires that all managed projects run code analysis and build before they can be checked in. Check Code analysis rule set reference on MSDN What is Rule Set? Rule Set is a group of code analysis rules like the example below where Microsoft.Design is the rule set name where "Do not declare static members on generic types" is the code analysis rule Once you configured the Analysis rule the policy will be enabled for all the team member in this project whenever a team member check-in any source code to the TFSVC the policy section will highlight the Code Analysis policy as below TFS is a very extensible platform so you can simply implement your own custom Code Analysis Check-in policy, check this link for more details http://msdn.microsoft.com/en-us/library/dd492668.aspx but you have to be aware also about compatibility between different TFS versions check http://msdn.microsoft.com/en-us/library/bb907157.aspx Run Code Analysis as part of Team Build With Team Foundation Build (TFBuild), you can create and manage build processes that automatically compile and test your applications, and perform other important functions. Code Analysis can be enabled in the Build Definition file by selecting the correct value for the build process parameter "Perform Code Analysis" Once configure, Kick-off your build definition to queue a new build, Code Analysis will run as part of build workflow and you will be able to see code analysis warning as part of build report Understand the Code Analysis results & learn how to fix them Now after you went through Code Analysis configurations and the different ways of running it, we will go through the Code Analysis result how to understand them and how to resolve them. Code Analysis window in Visual Studio will show all the analysis results based on the rule sets you configured in the project file properties, let's dig deep into what each result item contains: 1 Check ID The unique identifier for the rule. CheckId and Category are used for in-source suppression of a warning.       2 Title The title of warning message       3 Description A description of the problem or suggested fix 4 File Name File name and the line of code number which violate the code analysis rule set 5 Category The code analysis category for this error 6 Warning /Error Depend on how you configure it in the rule set the default is Warning level 7 Action Copy: copy the warning information to the clipboard Create Work Item: If you're connected to Team Foundation Server you can create a work item most probably you may create a Task or Bug and assign it for a developer to fix certain code analysis warning Suppress Message: There are times when you might decide not to fix a code analysis warning. You might decide that resolving the warning requires too much recoding in relation to the probability that the issue will arise in any real-world implementation of your code. Or you might believe that the analysis that is used in the warning is inappropriate for the particular context. You can suppress individual warnings so that they no longer appear in the Code Analysis window. Two options available: In Source inserts a SuppressMessage attribute in the source file above the method that generated the warning. This makes the suppression more discoverable. In Suppression File adds a SuppressMessage attribute to the GlobalSuppressions.cs file of the project. This can make the management of suppressions easier. Note that the SuppressMessage attribute added to GlobalSuppression.cs also targets the method that generated the warning. It does not suppress the warning globally.       Visual Studio makes it very easy to fix Code analysis warning, all you have to do is clicking on the Check Id hyperlink if you are not aware how to fix the warring and you'll be directed to MSDN online or local copy based on the configuration you did while installing Visual Studio and you will find all the information about the warring including how to fix it. Create a Custom Code Analysis Rule Set The Microsoft standard rule sets provide groups of rules that are organized by function and depth. For example, the Microsoft Basic Design Guidelines Rules and the Microsoft Extended Design Guidelines Rules contain rules that focus on usability and maintainability issues, with added emphasis on naming rules in the Extended rule set, you can create and modify a custom rule set to meet specific project needs associated with code analysis. To create a custom rule set, you open one or more standard rule sets in the rule set editor. Create and modify a custom rule set required Visual Studio Premium or Ultimate. You can check How to: Create a Custom Rule Set on MSDN for more details http://msdn.microsoft.com/en-us/library/dd264974.aspx Q & A Visual Studio static code analysis vs. FxCop vs. StyleCpp http://www.excella.com/blog/stylecop-vs-fxcop-difference-between-code-analysis-tools/ Code Analysis for SharePoint Apps and SPDisposeCheck? This post lists some of the rule set you can run specifically for SharePoint applications and how to integrate SPDisposeCheck as well. Code Analysis for SQL Server Database Projects? This post illustrate how to run static code analysis on T-SQL through SSDT ReSharper 8 vs. Visual Studio 2013? This document lists some of the features that are provided by ReSharper 8 but are missing or not as fully implemented in Visual Studio 2013. References A Few Billion Lines of Code Later: Using Static Analysis to Find Bugs in the Real World http://cacm.acm.org/magazines/2010/2/69354-a-few-billion-lines-of-code-later/fulltext What is New in Code Analysis for Visual Studio 2013 http://blogs.msdn.com/b/visualstudioalm/archive/2013/07/03/what-is-new-in-code-analysis-for-visual-studio-2013.aspx Analyze the code quality of Windows Store apps using Visual Studio static code analysis http://msdn.microsoft.com/en-us/library/windows/apps/hh441471.aspx [Hands-on-lab] Using Code Analysis with Visual Studio 2012 to Improve Code Quality http://download.microsoft.com/download/A/9/2/A9253B14-5F23-4BC8-9C7E-F5199DB5F831/Using%20Code%20Analysis%20with%20Visual%20Studio%202012%20to%20Improve%20Code%20Quality.docx Originally posted at "Hosam Kamel| Developer & Platform Evangelist" http://blogs.msdn.com/hkamel

  Read the article

• Upgrade Your Existing BI Publisher 11g (11.1.1.3) to 11.1.1.5

  - by Kan Nishida

  It’s already more than a month now since BI Publisher 11.1.1.5 was released at beginning of May. Have you already tried out many of the great new features? If you are already running on the first version of BI Publisher 11g (11.1.1.3) you might wonder how to upgrade the existing BI Publisher to the 11.1.1.5 version. There are two ways to do this, one is ‘Out-Place’ and another is ‘In-Place’. The ‘Out-Place’ would be quite simple. Basically you will need to install the whole BI or just BI Publisher standalone R11.1.1.5 at a different location then you can switch the catalog to the existing one so that all the reports will be there in the new 11.1.1.5 environment. But sometimes things are not that simple, you might have some custom applications or configuration on the original environment and you want to keep all of them with the upgraded environment. For such scenarios, there is the ‘In-Place’ upgrade, which overrides on top of the original environment only the parts relevant for BI and BI Publisher, and that’s what I’m going to talk about today. Here is the basic steps of the ‘In-Place’ upgrade. Upgrade WebLogic Server to 10.3.5 Upgrade BI System to 11.1.1.5 Upgrade Database Schema Re-register BI Components Upgrade FMW (Fusion Middleware) Configuration Upgrade BI Catalog There is a section that talks about this upgrade from 11.1.1.3 to 11.1.1.5 as part of the overall upgrade document. But I hope my blog post summarized it and made it simple for you to cover only what’s necessary. Upgrade Document: http://download.oracle.com/docs/cd/E21764_01/bi.1111/e16452/bi_plan.htm#BABECJJH Before You Start Stop BI System and Backup I can’t emphasize enough, but before you start PLEASE make sure you take a backup of the existing environments first. You want to stop all WebLogic Servers, Node Manager, OPMN, and OPMN-managed system components that are part of your Oracle BI domains. If you’re on Windows you can do this by simply selecting ‘Stop BI Services’ menu. Then backup the whole system. Upgrade WebLogic Server to 10.3.5 Download WebLogic Server 10.3.5 Upgrade Installer With BI 11.1.1.3 installation your WebLogic Server (WLS) is 10.3.3 and you need to upgrade this to 10.3.5 before upgrading the BI part. In order to upgrade you will need this 10.3.5 upgrade version of WLS, which you can download from our support web site (https://support.oracle.com) You can find the detail information about the installation and the patch numbers for the WLS upgrade installer on this document. Just for your short cut, if you are running on Windows or Linux (x86) here is the patch number for your platform. Windows 32 bit: 12395517: Linux: 12395517 Upgrade WebLogic Server 1. After unzip the downloaded file, launch wls1035_upgrade_win32.exe if you’re on Windows. 2. Accept all the default values and keep ‘Next’ till end, and start the upgrade. Once the upgrade process completes you’ll see the following window. Now let’s move to the BI upgrade. Upgrade BI Platform to 11.1.1.5 with Software Only Install Download BI 11.1.1.5 You can download the 11.1.1.5 version from our OTN page for your evaluation or development. For the production use it’s recommended to download from eDelivery. 1. Launch the installer by double click ‘setup.exe’ (for Windows) 2. Select ‘Software Only Install’ option 3. Select your original Oracle Home where you installed BI 11.1.1.3. 4. Click ‘Install’ button to start the installation. And now the software part of the BI has been upgraded to 11.1.1.5. Now let’s move to the database schema upgrade. Upgrade Database Schema with Patch Assistant You need to upgrade the BIPLATFORM and MDS Schemas. You can use the Patch Assistant utility to do this, and here is an example assuming you’ve created the schema with ‘DEV’ prefix, otherwise change it with yours accordingly. Upgrade BIPLATFORM schema (if you created this schema with DEV_ prev) psa.bat -dbConnectString localhost:1521:orcl -dbaUserName sys -schemaUserName DEV_BIPLATFORM Upgrade MDS schema (if you created this schema with DEV_ prev) psa.bat -dbConnectString localhost:1521:orcl -dbaUserName sys -schemaUserName DEV_MDS Re-register BI System components Now you need to re-register your BI system components such as BI Server, BI Presentation Server, etc to the Fusion Middleware system. You can do this by running ‘upgradenonj2eeapp.bat (or .sh)’ command, which can be found at %ORACLE_HOME%/opmn/bin. Before you run, you need to start the WLS Server and make sure your WLS environment is not locked. If it’s locked then you need to release the system from the Fusion Middleware console before you run the following command. Here is the syntax for the ‘upgradenonj2eeapp.bat (or .sh) command.  upgradenonj2eeapp.bat    -oracleInstance Instance_Home_Location    -adminHost WebLogic_Server_Host_Name    -adminPort administration_server_port_number    -adminUsername administration_server_user And here is an example: cd %BI_HOME%\opmn\bin upgradenonj2eeapp.bat -oracleInstance C:\biee11\instances\instance1 -adminHost localhost -adminPort 7001 -adminUsername weblogic Upgrade Fusion Middleware Configuration There are a couple things on the Fusion Middleware need to be upgraded for the BI system to work. Here is a list of the components to upgrade. Upgrade Shared Library (JRF) Upgrade Fusion Middleware Security (OPSS) Upgrade Code Grants Upgrade OWSM Policy Repository Before moving forward, you need to stop the WebLogic Server. Here is an example. cd %MW_HOME%user_projects\domains\bifoundation_domain\binstopWebLogic.cmd And, let’s start with ‘Upgrade Shared Library (JRF)’. Upgrade Shared Library (JRF) You can use updateJRF() WLST command to upgrade the shared libraries in your domain. Before you do this, you need to stop all running instances, Managed Servers, Administration Server, and Node Manager in the domain. Here is an example of the ‘upgradeJRF()’ command: cd %MW_HOME%\oracle_common\common\bin wlst.cmd upgradeJRF('C:/biee11/user_projects/domains/bifoundation_domain') Upgrade Fusion Middleware Security (OPSS) This step is to upgrade the Fusion Middleware security piece. You can use ‘upgradeOpss()’ WLST command. Here is a syntax for the command. upgradeOpss(jpsConfig="existing_jps_config_file", jaznData="system_jazn_data_file") The ‘existing jps-config.xml file can be found under %DOMAIN_HOME%/config/fmwconfig/jps-config.xml and the ‘system_jazn_data_file’ can be found under %MW_HOME%/oracle_common/modules/oracle.jps_11.1.1/domain_config/system-jazn-data.xml. And here is an example: cd %MW_HOME%\oracle_common\common\bin wlst.cmd upgradeOpss(jpsConfig="c:/biee11/user_projects/domains/bifoundation_domain/config/fmwconfig/jps-config.xml", jaznData="c:/biee11/oracle_common/modules/oracle.jps_11.1.1/domain_config/system-jazn-data.xml") exit() Upgrade Code Grants for Oracle BI Domain And this is the last step for the Fusion Middleware platform upgrade task. You need to run this python script ‘bi-upgrade.py‘ script to configure the code grants necessary to ensure that SSL works correctly for Oracle BI. However, even if you don’t use SSL, you still need to run this script. And if you have multiple BI domains (Enterprise deployment) then you need to run this on each domain. Here is an example: cd %MW_HOME%\oracle_common\common\bin wlst c:\biee11\Oracle_BI1\bin\bi-upgrade.py --bioraclehome c:\biee11\Oracle_BI1 --domainhome c:\biee11\user_projects\domains\bifoundation_domain Upgrade OWSM Policy Repository This is to upgrade OWSM (Oracle Web Service Manager) policy repository, you can use WLST command ‘upgradeWSMPolicyRepository()’. In order to run this command you need to have your WebLogic Server up-and-running. Here is an example. cd %MW_HOME%user_projects\domains\bifoundation_domain\binstopWebLogic.cmd cd %MW_HOME%\oracle_common\common\bin wlst.cmd connect ('weblogic','welcome1','t3://localhost:7001') upgradeWSMPolicyRepository() exit() Upgrade BI Catalogs This step is required only when you have your BI Publisher integrated with BIEE. If your BI Publisher is deployed as a standalone then you don’t need to follow this step. Now finally, you can upgrade the BI catalog. This won’t upgrade your BI Publisher reports themselves, but it just upgrades some attributes information inside the catalog. Before you do this upgrade, make sure the BI system components are not running. You can check the status by the command below. opmnctl status You can do the upgrade by updating a configuration file ‘instanceconfig.xml’, which can be found at %BI_HOME%\instances\instance1\config\coreapplication_obips1, and change the value of ‘UpgradeAndExit’ to be ‘true’. Here is an example: <ps:Catalog xmlns:ps="oracle.bi.presentation.services/config/v1.1"> <ps:UpgradeAndExit>true</ps:UpgradeAndExit> </ps:Catalog> After you made the change and save the file, you need to start the BI Presentation Server. This time you want to start only the BI Presentation Server instead of starting all the servers. You can use ‘opmnctl’ to do so, and here is an example. cd %ORACLE_INSTANCE%\bin opmnctl startproc ias-component=coreapplication_obips1 This would upgrade your BI Catalog to be 11.1.1.5. After the catalog is updated, you can stop the BI Presentation Server so that you can modify the instanceconfig.xml file again to revert the upgradeAndExit value back to ‘false’. Start Explore BI Publisher 11.1.1.5 After all the above steps, you can start all the BI Services, access to the same URL, now you have your BI Publisher and/or BI 11.1.1.5 in your hands. Have fun exploring all the new features of R11.1.1.5!

  Read the article

• Turn Photos and Home Videos into Movies with Windows Live Movie Maker

  - by DigitalGeekery

  Are you looking for an easy way to take your digital photos and videos and turn them into a movie or slideshow? Today we’ll take a detailed look at how to do use Windows Live Movie Maker. Installation Windows Live Movie Maker comes bundled as part of the Windows Live Essentials suite (link below). However, you don’t have to install any of the programs you may not want. Take notice of the You’re almost done screen. Before clicking Continue, be sure to uncheck the boxes to set your search provider and homepage. Adding Pictures and Videos Open Windows Live Movie Maker. You can add videos or photos by simply dragging and dropping them onto the storyboard area. You can also click on the storyboard area or on the Add videos and photos button on the Home tab to browse for videos and photos. Windows Live Movie Maker supports most video, image, and audio file types. Select your files and add click Open to add them to Windows Live Movie Maker. By default WLMM doesn’t allow you to add files from network locations…so check out our article on how to add network support to Windows Live MovieMaker if the files you want to add are on a network drive. Layout All of your added clips will appear in the storyboard area on the right, while the currently selected clip will appear in the preview window on the left. You can adjust the size of the two areas by clicking and dragging the dividing line in the middle.    Make the clips on the storyboard bigger or smaller by clicking on the thumbnail size icon. The slider at the lower right adjusts the zoom time scale.   Previewing your Movie At any time, you can playback your movie and preview how it will look in the Preview window by clicking the space bar, or by pushing the play button under the preview window. You can also manually move the preview bar slider across the storyboard to view the clips as the video progresses. Adjusting Clips on the Storyboard You can click and drag clips on the storyboard to change the order in which the photos and videos appear.   Adding Music Nothing brings a movie to life quite like music. Selecting Add music will add your music to the beginning of the movie. Select Add music at the current point to include it in the movie to the current location of your preview bar slider, then browse for your music clip. WLMM supports many common audio files such as WAV, MP3, M4A, WMA, AIFF, and ASF. The music clip will appear above the video / photos clips on the storyboard.   You can change the location of music clips by clicking and dragging them to a different location on the storyboard. Add Titles, Captions, and Credits To add a Title screen to your movie, click the Title button on the Home tab. Type your title directly into the text box on the preview screen. The title will be placed at the location of the preview slider on the storyboard. However, you can change the location by clicking and dragging title to other areas of the storyboard. On the Format tab, there are a handful of text settings. You can change the font, color, size, alignment,  and transparency. The Adjust group allows you to change the background color, edit the text, and set the length of time the Title will appear in the movie.   The Effects group on the Format tab allows you to select an effect for your title screen. By hovering your cursor over each option, you will get a live preview of how each effect will appear in the preview window. Click to apply any of the effects. For captions, select where you want your caption to appear with the preview slider on the storyboard, then click the captions button on the Home tab. Just like the title, you type your caption directly into the text box on the preview screen, and you can make any adjustments by using the Font and Paragraph, Adjust, and Effects groups above. Credits are done the same as titles and captions, except they are automatically placed at the end of the movie.   Transitions Go to the Animation tab on the ribbon to apply transitions. Select a clip from the storyboard and hover over one of the transition to see it in the preview window. Click on the transition to apply it to the clip. You can apply transitions separately to clips or hold down Ctrl button while clicking to select multiple clips to which to apply the same transition. Pan and zoom effects are also located on the Animations tab, but can be applied to photos only. Like transition, you can apply them individually to a clip or hold down Ctrl button while clicking to select multiple clips to which to apply the same pan and zoom effect. Once applied, you can adjust the duration of the transitions and pan and zoom effects. You can also click the dropdown for additional transitions or effects. Visual Effects Similar to Pan and Zoom and Transitions, you can apply a variety of Visual Effects to individual or multiple clips. Editing Video and Music Note: This does not actually edit the original video you imported into your Windows Live Movie Maker project, only how it appears in your WLMM project. There are some very basic editing tools located on the Home tab. The Rotate left and Rotate right button will adjust any clip that may be oriented incorrectly. The Fit to music button will automatically adjust the duration of the photos (if you have any in your project) to fit the length of the music in your movie. Audio mix allows you to change the volume level   You can also do some slightly more advanced editing from the Edit tab. Select the video clip on the storyboard and click the Trim tool to edit or remove portions of a video clip. Next, click and drag the sliders in the preview windows to select the are you wish to keep. For example, the area outside the sliders is the area trimmed from the movie. The area inside is the section that is kept in the movie. You can also adjust the Start and End points manually on the ribbon.   When you are finished, click Save trim. You can also split your video clips. Move the preview slider to the location in the video clip where you’d like to split it, and select Split. Your video will be split into separate sections. Now you can apply different effects or move them to different locations on the storyboard. Editing Music Clips Select the music clip on the storyboard and then the Options tab on the ribbon. You can adjust the music volume by moving the slider right and left.   You can also choose to have your music clip fade in or out at the beginning and end of your movie. From the Fade in and Fade out dropdowns, select None, Slow, Medium, or Fast. To adjust the sound of your audio clips, click on the Edit tab, select the Video volume button, and adjust the slider. Move it all the way to the left to mute any background noise in your video clips.   AutoMovie As you have seen, Windows Live Movie Maker allows you to add effects, transitions, titles, and more. If you don’t want to do any of that stuff yourself, AutoMovie will automatically add title, credits, cross fade transitions between items, pan and zoom effects to photos, and fit your project to the music. Just select the AutoMovie button on the Home tab. You can go from zero to movie in literally a couple minutes.   Uploading to YouTube You can share your video on YouTube directly from Windows Live Movie Maker. Click on the YouTube icon in the Sharing group on the Home tab. You’ll be prompted for your YouTube username and password. Fill in the details about your movie and click Publish. The movie will be converted to WMV before being uploaded to YouTube. As soon as the YouTube conversion is complete, you’re new movie is live and ready to be viewed. Saving your Movie as a Video File Select the icon at the top left, then select Save movie. As you hover your mouse over each of the options, you will see the output display size, aspect ratio, and estimated file size per minute of video. All of these settings will output your movie as a WMV file. (Unfortunately, the only option is to save a movie as a WMV file.) The only difference is how they are encoded based on preset common settings. The Burn to DVD option also outputs a WMV file, but then opens Windows DVD Maker and walks you through the process of creating and burning a DVD.   If you choose the Burn to DVD option, close this window when the WMV file conversion is complete and the Windows DVD Maker will prompt you to begin. When your movie is finished, it’s time to relax and enjoy.   Conclusion Windows Live Movie Maker makes it easy for the average person to quickly churn out nice looking movies and slideshows from there own pictures and videos. However, long time users of previous editions (formerly called Windows Movie Maker) will likely be disappointed by some features missing in Windows Live Movie Maker that existed in earlier editions. Looking for details on burning your new project to DVD, check out our article on how to create and author DVDs with Windows DVD Maker. Download Windows Live Movie Maker Similar Articles Productive Geek Tips Family Fun: Share Photos with Photo Gallery and Windows Live SpacesCreate and Author DVDs in Windows 7Rotate a Video 90 degrees with VLC or Windows Live Movie MakerInstall Windows Live Essentials In Windows 7How to Make/Edit a movie with Windows Movie Maker in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010

  Read the article

• CodePlex Daily Summary for Sunday, February 28, 2010

  CodePlex Daily Summary for Sunday, February 28, 2010New ProjectsESB Toolkit Extensions: ESB Extensions is a solution containing multiple .Net Projects and artifacts: Unit Tests, Itineraries, Business Rules, Binding Files, and C# Class ...Event-Based Components Binder: The Binder automatically connects output-pins to input-pins of Event-Based Components based on message type information and naming conventions. ...Haze Anti-Virus: Haze Anti-Virus is a anti virus written in C# and has features such a realtime process watching and a Process Blacklist, and is able to download Da...latex2mathml: A .NET 2.0 library written in C# which allows the conversion of LaTeX documents to XHTML+MathML format. A stand-alone converter is included. The li...Project Lyrebird: Project lyrebird is a attempt to create a all-purpose media player. It is designed to be simple, yet powerful. Its written in C#QueryToGrid Module for DotNetNuke®: This is a module that allows you to execute and display the results of T-SQL queries in DotNetNuke using your choice of AJAX grids.Reusable Library Demo: A demonstration of reusable abstractions for enterprise application developerSharePoint 2010 Conference Samples: This project contains source code from various SharePoint 2010 conferences where Scot Hillier presented.Silverlight Photo Blogger: Silverlight Photo Blogger gives you the tools you need to capture and blog about your travels in a rich and interactive web experience. Enjoy som...SMTP Test: Several times we are faced with applications that send email, the SMTP Tester principle objective is to test various possibilities of sendingSolution Tools - tools for Visual Studio solutions and projects: Solution Tools are a collection of tools that you can use with your Visual Studio Solutions and projects.New ReleasesAgile Poker Cards for Windows Mobile: Agile Poker Cards v1.1.0.0: Agile Poker Cards v1.1.0.0 Use this application to display poker cards in a planning session on a Windows Mobile device. Release notes Added new ...BuildTools - Toolset for automated builds: BuildTools 2.0 Feb 2010 Milestone: The Feb 2010 Milestone release is a complete rewrite of the old codebase in Visual Studio 2010 RC. It features MSBuild tasks for generating build v...Composure: NHibernate-Trunk-2010-02-25-VS2010.NET4 Alpha1: Recent NHibernate-Trunk conversion for Visual Studio 2010 Beta2 against .NET 4.0. Although all of the tests pass (other than the "Ignored"), this ...Employee Scheduler: Employee Scheduler 2.4: Extract the files to a directory and run Lab Hours.exe. Add an employee. Double click an employee to modify their times. Please contact me through ...ESB Toolkit Extensions: Tellago BizTalk ESB 2.0 Toolkit Extensions: Windows Installer file that installs Library on a BizTalk ESB 2.0 system. This Install automatically configures the esb.config to use the new compo...Haze Anti-Virus: Haze Anti-Virus Binary v1.0.3: This is the Compiled version of Haze Anti-Virus, please let me know about any bugs, thanks Please Note that Database updating is currently not avai...Haze Anti-Virus: Haze Anti-Virus Source v1.0.3: This is the source for Haze Anti-VirusHOG Project: HOG Visual Studio Template: This is Visual Studio HOG Template. Created by the great tool: Solution FactoryHOG Project: Template user guide: HOW TOiTuner - The iTunes Companion: iTuner 1.1.3711: Two new features are available: the Automated Librarian and Playlist Exporter. The iTuner Automated Librarian automatically cleans the iTunes libr...johanleino.codeplex.com: SilverlightMultiLevelNavigationExample: The source code for SilverlightMultiLevelNavigationExample (VS 2010)MDownloader: MDownloader-0.15.3.56128: Fixed filefactory provider implementation after site changes.MiniTwitter: 1.09: MiniTwitter 1.09 更新内容 変更 スクロール位置がトップ以外の時は自動更新や発言時に位置を保持するように変更 タブ毎にスクロール位置が変わらないように変更 URL に ? や ! が含まれている時は短縮 URL に変換するように変更NMock3: NMock3 - Beta 4, .NET 3.5: This release includes the most current version of the NMock2 project code from Source Forge. Please start providing feedback on the tutorials. The...QueryUnit: QueryUnitPOC v. 0.0.0.7: - This version fixes problems related to the fact that in previous releases you had to specify expected values using locale-specific formats. Now e...RapidWebDev - .NET Enterprise Software Development Infrastructure: RapidWebDev 1.51: This is a hot-fix version for 1.5 which is added a new restful web service for concrete data and fixed some major bugs. The change list is as follo...Rawr: Rawr 2.3.11: - Load from Armory code cleaned up. - Tiny Abomination in a Jar's proc how now been more accurately modeled. - You should now be able to reload...Resharper Settings Manager: RSM v1.2: Changes Added Default Settings File option. The selected settings file will be loaded automatically for solutions with no settings sharing. Added...Reusable Library Demo: Reusable Library Demo v1.0.0: A demonstration of reusable abstractions for enterprise application developerRounded Corners / DIV Container: MJC RoundedDiv 3.2: This is the first public release on Codeplex.com. Versions previous to 3.2 were created before this control was made available on Codeplex.com.SharePoint 2010 Conference Samples: Samples: Download the samples from the conferencesSharePoint Outlook Connector: Version 1.2.2.8: Saving email message as list item and attachments as attachment of the list item functionality has been addedSharePoint URL Ping Tool: Url Ping Tool Solution: A solution that contain one fram fature that will add a link under Site Administration section in the Site Settings page.SMTP Test: Fist SMTP Tester: First ReleaseSolution Tools - tools for Visual Studio solutions and projects: SolutionTools binary: Initial release of the tool. Turns out, this project was just a big waste of effort - use Project Linker instead!Solution Tools - tools for Visual Studio solutions and projects: SolutionTools source - don't use this tool: Initial release of the tool. Turns out, this project was just a big waste of effort - use Project Linker instead! Anyway, here's the source code...Spark View Engine: Spark v1.1 RC1: Overview This build is a preview of v1.1. Among other changes it provides support for ASP.NET MVC 2 RC2. Spark v1.1 release will be created soon ...Sprite Sheet Packer: 2.0 Release: I'm calling this a full new release because I can. Refactored all of the build logic to sspack.exe. This allows you to run this from the command l...SPSF SharePoint Software Factory: SPSF SharePoint Software Factory 2.4.3: New features: WSPBuilder support, Simple Application now with optional multilanguage support, Extending deployment skript for large deployments Fix...TortoiseHg: Beta for TortoiseHg 1.0 (0.9.31201): Beta for TortoiseHg 1.0 (0.9.31201) Please backup your user Mercurial.ini file and then uninstall any 0.9.X release before installing Use the x86...UI Compiler .NET - JavaScript compiler/minifier built on Google Closure Compiler: UI Compiler .NET 1.5 Beta: UI Compiler .NET does not include Java. To be able to run Google Closure Compiler locally you must make sure that Java 6 is installed. If Java 6 (o...VCC: Latest build, v2.1.30227.0: Automatic drop of latest buildVisual Studio DSite: File Encryption and Decryption (Visual Basic 2008): This program will create an encrypted copy of the file specified. Also decrypt the file specified. This program contains the source code but if yo...Visual Studio DSite: Visual C++ 2008 CLR Console Application Random Int: This source code includes an example of generating a random integer between the numbers 1-100.Weather Forecast Control: MJC MyWeather 2.2: This is the first public release on Codeplex.com. Versions previous to 2.2 were created before this control was made available on Codeplex.com.Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Microsoft SQL Server Community & SamplesASP.NETDotNetNuke® Community EditionBlogEngine.NETMost Active ProjectsDinnerNow.netRawrBlogEngine.NETMapWindow GISSLARToolkit - Silverlight Augmented Reality ToolkitCommon Context Adapterspatterns & practices – Enterprise LibrarySharpMap - Geospatial Application Framework for the CLRNB_Store - Free DotNetNuke Ecommerce Catalog ModuleRapid Entity Framework. (ORM). CTP 2

  Read the article

• CodePlex Daily Summary for Friday, February 26, 2010

  CodePlex Daily Summary for Friday, February 26, 2010New Projectsaion-gamecp: Aion Gamecp for aion Private server based on Aion UniqueAzure Email Queuer: Azure Email Queuer makes it easier for Developers Programming in the Cloud to Queue Emails to keep the UI Thread Clear for Requests. Developed w...BIG1: Bob and Ian's Game. Written using XNA Game Studio Express. Basically an update of David Braben and Ian Bell's classic game "Elite." This is a nonco...CMS7: CMS7 The CMS7 is composed of three module. (1)Main CMS Business (2)Process Customization (3)Role/Department CustomizationCoreSharp Networking Core: A simple to use framework to develop efficient client/server application. The framework is part of my project at school and I hope it will benefit ...Fullscreen Countdown: Small and basic countdown application. The countdown window can be resized to fit any size to display the minutes elapsed. Developped in C#, .NET F...IRC4N00bz: Learning sockets, events, delegates, SQL, and IRC commands all in one big project! It's written in C# (Csharp) and hope you find it helpfull, or ev...LjSystem: This project is a collection of my extensions to the BCLMP3 Tags Management: A software to manage the tags of MP3 filesnetone: All net in oneNext Dart (Dublin Area Rapid Transport): The shows the times of the next darts from a given station. It is a windows application that updates automatically and so is easier to use than th...PChat - An OCDotNet.Org Presentation: PChat is a multithreaded pinnable chat server and client. It is designed to be a demonstration of Visual Studio 2010 MVC 2, for ocdotnet.org Use...Pittsburgh Code Camp iPhone App: The Pittsburgh Code Camp iPhone Application is meant as a demonstration of the creation of an iPhone application while at the same time providing t...Radical: Radical is an infrastructure frameworkRadioAutomation: Windows application for radio automation.SilverSynth - Digital Audio Synthesis for Silverlight: SilverSynth is a digial audio synthesis library for Silverlight developers to create synthesized wave forms from code. It supports synthesis of sin...SkeinLibManaged: This implementation of the Skein Cryptographic Hash function is written entirely in Managed CSharp. It is posted here to share with the world at l...SpecExplorerEval: We are checking out spec explorer and presenting on its useSPOJemu: This is a SPOJ emulator. It allows you to define tests in xml and then check your application if it's working as you expected.The C# Skype Chat bot: A Skype bot in C# for managing Skype chats.VS 2010 Architecture Layers Patterns: Architecture layers patterns toolbox items for layers diagrams.Yakiimo3D: Mostly DirectX 11 programming tutorials.代码生成器: Project DetailsNew ReleasesArkSwitch: ArkSwitch v1.1.1: This release fixes a crash that occurs when certain processes with multiple primary windows are encountered.BTP Tools: CSB, CUV and HCSB e-Sword files 2010-02-26: include csb.bbl csb+.bbl csb.cmt csbc.dct cuv.bbl cuv+.bbl cuv.cmt cuvc.dct hcsb+.bbl hcsbc.dct files for e-Sword 8.0BubbleBurst: BubbleBurst v1.1: This is the second release of BubbleBurst, the subject of the book Advanced MVVM. This release contains a minor fix that was added after the book ...DevTreks -social budgeting that improves lives and livelihoods: Social Budgeting Web Software, alpha 3b: Alpha 3b simplifies and strengthens state management. With the exception of linked lists, the internal mechanics of addins have not been improved...Dragonrealms PvpStance plugin for Genie: 1.0.0.4: This updated is needed now that the DR server move broke the "profile soandso pvp" syntax. This version will capture the pvp stance out of the full...FastCode: FastCode 1.0: Definitions <integerType> : byte, sbyte, short, ushort, int, uint, long, ulond <floatType> : float, double, decimal Base types extensions Intege...Fullscreen Countdown: Fullscreen Countdown 1.0: First versionIRC4N00bz: IRC4N00bz_02252010.zip: I'm calling it a night. Here's the dll for where I'm at so far. It works, just lakcs some abilities. Anything not included can be pulled from th...Labrado: Labrado MiniTimer: Labrado MiniTimer is a convenient timer tool designed and implemented for GMAT test preparation.LINQ to VFP: LinqToVfp (v1.0.17.1): Cleaned up WCF Data Service Expression Tree. (details...) This build requires IQToolkit v0.17b.Microsoft Health Common User Interface: Release 8.0.200.000: This is version 8.0 of the Microsoft® Health Common User Interface Control Toolkit. The scope and requirements of this release are based on materia...Mini SQL Query: Mini SQL Query Funky Dev Build (RC1+): The "Funk Dev Build" bit is that I added a couple of features I think are pretty cool. It is a "dev" build but I class it as stable. Find Object...Neovolve: Neovolve.BlogEngine.Extensions 1.2: Updated extensions to work with BE 1.6. Updated Snippets extension to better handle excluded tags and fixed regex bug. Added SyntaxHighlighter exte...Neovolve: Neovolve.BlogEngine.Web 1.1: Update to support BE version 1.6 Neovolve.BlogEngine.Web 1.1 contains a redirector module that translates Community Server url formats into BlogEn...Next Dart (Dublin Area Rapid Transport): 1.0: There are 2 files NextDart 1.0.zip This contains just the files. Extract it to a folder and run NextDart.exe. NextDart 1.0 Intaller.zip This c...Powershell4SQL: Version 1.2: Changes from version 1.1 Added additional attributes to simplify syntax. Server and Database become optional. Defaulted to (local) and 'master' ...Radical: Radical (Desktop) 1.0: First stable dropRaidTracker: Raid Tracker: a few tweaksRaiser's Edge API Developer Toolkit: Alpha Release 1: This is an untested, alpha release. Contains RE API Toolkit built using 7.85 Dlls and 7.91 Dlls.SharePoint Enhanced Calendar by ArtfulBits: ArtfulBits.EnhancedCalendar v1.3: New Features: Simple to activate mechanism added (add Enhanced Calendar Web Part on the same page as standard calendar) Support for any type of S...Silverlight 4.0 Com Library for SQL Server Access: Version 1.0: This is the intial alpha release. It includes ExecuteQuery, ExecuteNonQuery and ExecuteScalar routines. See roadmap section of home page for detai...Silverlight HTML 5 Canvas: SLCanvas 1.1: This release enables <canvas renderMethod="auto" onload="runme(this)"></canvas> or <canvas renderMethod="Silverlight" onload="runme(this)"></ca...SilverSynth - Digital Audio Synthesis for Silverlight: SilverSynth 1.0: Source code including demo application.StringDefs: StringDefs Alpha Release 1.01: In this release of the Library few namespaces are added.STSDev 2008: STSDev 2008 2.1: Update to the StsDev 2008 project to correct Manifest Building issues.Text to HTML: 0.4.0.2: Cambios de la versión:Correcciones menores en el sistema de traducción. Controlada la excepción aparecida al suprimir los archivos de idioma. A...The Silverlight Hyper Video Player [http://slhvp.com]: Release 4 - Friendly User Release (Pre-Beta): Release 4 - Friendly User Release (Pre-Beta) This version of the code has much of the design that we plan to go forward with for Mix and utilizes a...TreeSizeNet: TreeSizeNet 0.10.2: - Assemblies merged in one executableVCC: Latest build, v2.1.30225.0: Automatic drop of latest buildVCC: Latest build, v2.1.30225.1: Automatic drop of latest buildVS 2010 Architecture Layers Patterns: VS 2010 RC Architecture Layers Patterns v1.0: Architecture layers patterns toolbox items based on the Microsoft Application Architecture Guide, 2nd Edition for the layer diagram designer of Vi...Yakiimo3D: DirectX11 BitonicSortCPU Source and Binary: DirectX11 BitonicSortCPU sample source and binary.Yakiimo3D: DirectX11 MandelbrotGPU Source and Binary: DirectX11 MandelbrotGPU source and binary.Most Popular ProjectsVSLabOSIS Interop TestsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesMost Active ProjectsDinnerNow.netRawrBlogEngine.NETSLARToolkit - Silverlight Augmented Reality ToolkitInfoServiceSharpMap - Geospatial Application Framework for the CLRCommon Context AdaptersNB_Store - Free DotNetNuke Ecommerce Catalog ModulejQuery Library for SharePoint Web Servicespatterns & practices – Enterprise Library

  Read the article

• Silverlight Recruiting Application Part 6 - Adding an Interview Scheduling Module/View

  Between the last post and this one I went ahead and carried the ideas for the Jobs module and view into the Applicants module and view- they're both doing more or less the same thing, except with different objects being at their core.  Made for an easy cut-and-paste operation with a few items being switched from one to another.  Now that we have the ability to add postings and applicants, wouldn't it be nice if we could schedule an interview?  Of course it would! Scheduling Module I think you get the drift from previous posts that these project structures start looking somewhat similar.  The interview scheduling module is no different than the rest- it gets a SchedulingModule.cs file at the root that inherits from IModule, and there is a single SchedulerView.xsml and SchedulerViewModel.cs setup for our V+VM.  We have one unique concern as we enter into this- RadScheduler deals with AppointmentsSource, not ItemsSource, so there are some special considerations to take into account when planning this module. First, I need something which inherits from AppointmentBase.  This is the core of the RadScheduler appointment, and if you are planning to do any form of custom appointment, you'll want it to inherit from this.  Then you can add-on functionality as needed.  Here is my addition to the mix, the InterviewAppointment: 01.public class InterviewAppointment : AppointmentBase 02.{ 03.    private int _applicantID; 04.    public int ApplicantID 05.    { 06.        get { return this._applicantID; } 07.        set 08.        { 09.            if (_applicantID != value) 10.            { 11.                _applicantID = value; 12.                OnPropertyChanged("ApplicantID"); 13.            } 14.        } 15.    } 16.   17.    private int _postingID; 18.    public int PostingID 19.    { 20.        get { return _postingID; } 21.        set 22.        { 23.            if (_postingID != value) 24.            { 25.                _postingID = value; 26.                OnPropertyChanged("PostingID"); 27.            } 28.        } 29.    } 30.   31.    private string _body; 32.    public string Body 33.    { 34.        get { return _body; } 35.        set 36.        { 37.            if (_body != value) 38.            { 39.                _body = value; 40.                OnPropertyChanged("Body"); 41.            } 42.        } 43.    } 44.   45.    private int _interviewID; 46.    public int InterviewID 47.    { 48.        get { return _interviewID; } 49.        set 50.        { 51.            if (_interviewID != value) 52.            { 53.                _interviewID = value; 54.                OnPropertyChanged("InterviewID"); 55.            } 56.        } 57.    } 58.   59.    public override IAppointment Copy() 60.    { 61.        IAppointment appointment = new InterviewAppointment(); 62.        appointment.CopyFrom(this);             63.        return appointment; 64.    } 65.   66.    public override void CopyFrom(IAppointment other) 67.    {             68.        base.CopyFrom(other); 69.        var appointment = other as InterviewAppointment; 70.        if (appointment != null) 71.        { 72.            ApplicantID = appointment.ApplicantID; 73.            PostingID = appointment.PostingID; 74.            Body = appointment.Body; 75.            InterviewID = appointment.InterviewID; 76.        } 77.    } 78.} Nothing too exciting going on here, we just make sure that our custom fields are persisted (specifically set in CopyFrom at the bottom) and notifications are fired- otherwise this ends up exactly like the standard appointment as far as interactions, etc.  But if we've got custom appointment items... that also means we need to customize what our appointment dialog window will look like. Customizing the Edit Appointment Dialog This initially sounds a lot more intimidating than it really is.  The first step here depends on what you're dealing with for theming, but for ease of everything I went ahead and extracted my templates in Blend for RadScheduler so I could modify it as I pleased.  For the faint of heart, the RadScheduler template is a few thousand lines of goodness since there are some very complex things going on in that control.  I've gone ahead and trimmed down the template parts I don't need as much as possible, so what is left is all that is relevant to the Edit Appointment Dialog.  Here's the resulting Xaml, with line numbers, so I can explain further: 001.<UserControl.Resources> 002.    <!-- begin Necessary Windows 7 Theme Resources for EditAppointmentTemplate --> 003.    <helpers:DataContextProxy x:Key="DataContextProxy" /> 004.       005.    <telerik:Windows7Theme x:Key="Theme" /> 006.    <SolidColorBrush x:Key="DialogWindowBackground" 007.                     Color="White" /> 008.    <SolidColorBrush x:Key="CategorySelectorBorderBrush" 009.                     Color="#FFB1B1B1" /> 010.    <LinearGradientBrush x:Key="RadToolBar_InnerBackground" 011.                         EndPoint="0.5,1" 012.                         StartPoint="0.5,0"> 013.        <GradientStop Color="#FFFDFEFF" 014.                      Offset="0" /> 015.        <GradientStop Color="#FFDDE9F7" 016.                      Offset="1" /> 017.        <GradientStop Color="#FFE6F0FA" 018.                      Offset="0.5" /> 019.        <GradientStop Color="#FFDCE6F4" 020.                      Offset="0.5" /> 021.    </LinearGradientBrush> 022.    <Style x:Key="FormElementTextBlockStyle" 023.           TargetType="TextBlock"> 024.        <Setter Property="HorizontalAlignment" 025.                Value="Right" /> 026.        <Setter Property="VerticalAlignment" 027.                Value="Top" /> 028.        <Setter Property="Margin" 029.                Value="15, 15, 0, 2" /> 030.    </Style> 031.    <Style x:Key="FormElementStyle" 032.           TargetType="FrameworkElement"> 033.        <Setter Property="Margin" 034.                Value="10, 10, 0, 2" /> 035.    </Style> 036.    <SolidColorBrush x:Key="GenericShallowBorderBrush" 037.                     Color="#FF979994" /> 038.    <telerik:BooleanToVisibilityConverter x:Key="BooleanToVisibilityConverter" /> 039.    <telerikScheduler:ImportanceToBooleanConverter x:Key="ImportanceToBooleanConverter" /> 040.    <telerikScheduler:NullToVisibilityConverter x:Key="NullToVisibilityConverter" /> 041.    <telerikScheduler:InvertedNullToVisibilityConverter x:Key="InvertedNullToVisibilityConverter" /> 042.    <scheduler:ResourcesSeparatorConverter x:Key="ResourcesSeparatorConverter" /> 043.    <DataTemplate x:Key="IconDataEditTemplate"> 044.        <Image Source="/Telerik.Windows.Controls.Scheduler;component/Themes/Office/Images/cal.png" 045.               Margin="3,3,0,0" 046.               Width="16" 047.               Height="16" /> 048.    </DataTemplate> 049.    <DataTemplate x:Key="SingleSelectionTemplate"> 050.        <Grid VerticalAlignment="Stretch" 051.              HorizontalAlignment="Stretch"> 052.            <Grid.RowDefinitions> 053.                <RowDefinition Height="Auto" /> 054.            </Grid.RowDefinitions> 055.            <Grid.ColumnDefinitions> 056.                <ColumnDefinition Width="Auto" 057.                                  MinWidth="84" /> 058.                <ColumnDefinition Width="Auto" 059.                                  MinWidth="200" /> 060.            </Grid.ColumnDefinitions> 061.            <TextBlock x:Name="SelectionNameLabel" 062.                       Margin="0,13,4,2" 063.                       Text="{Binding ResourceType.DisplayName}" 064.                       Style="{StaticResource FormElementTextBlockStyle}" 065.                       Grid.Column="0" /> 066.            <telerikInput:RadComboBox ItemsSource="{Binding ResourceItems}" 067.                                      Width="185" 068.                                      Margin="5,10,20,2" 069.                                      HorizontalAlignment="Left" 070.                                      Grid.Column="1" 071.                                      ClearSelectionButtonVisibility="Visible" 072.                                      ClearSelectionButtonContent="Clear All" 073.                                      DisplayMemberPath="Resource.DisplayName" 074.                                      telerik:StyleManager.Theme="{StaticResource Theme}" 075.                                      SelectedItem="{Binding SelectedItem, Mode=TwoWay}" /> 076.        </Grid> 077.    </DataTemplate> 078.    <DataTemplate x:Key="MultipleSelectionTemplate"> 079.        <Grid VerticalAlignment="Stretch" 080.              HorizontalAlignment="Stretch"> 081.            <Grid.RowDefinitions> 082.                <RowDefinition Height="Auto" /> 083.            </Grid.RowDefinitions> 084.            <Grid.ColumnDefinitions> 085.                <ColumnDefinition Width="Auto" 086.                                  MinWidth="84" /> 087.                <ColumnDefinition Width="Auto" 088.                                  MinWidth="200" /> 089.            </Grid.ColumnDefinitions> 090.            <TextBlock x:Name="SelectionNameLabel" 091.                       Grid.Column="0" 092.                       Text="{Binding ResourceType.DisplayName}" 093.                       Margin="0,13,4,2" 094.                       Style="{StaticResource FormElementTextBlockStyle}" /> 095.            <telerikInput:RadComboBox Grid.Column="1" 096.                                      Width="185" 097.                                      HorizontalAlignment="Left" 098.                                      Margin="5,10,20,2" 099.                                      ItemsSource="{Binding ResourceItems}" 100.                                      SelectedIndex="{Binding SelectedIndex, Mode=TwoWay}" 101.                                      ClearSelectionButtonVisibility="Visible" 102.                                      ClearSelectionButtonContent="Clear All" 103.                                      telerik:StyleManager.Theme="{StaticResource Theme}"> 104.                <telerikInput:RadComboBox.ItemTemplate> 105.                    <DataTemplate> 106.                        <Grid HorizontalAlignment="Stretch" 107.                              VerticalAlignment="Stretch"> 108.                            <CheckBox VerticalAlignment="Center" 109.                                      HorizontalContentAlignment="Stretch" 110.                                      VerticalContentAlignment="Center" 111.                                      IsChecked="{Binding IsChecked, Mode=TwoWay}" 112.                                      Content="{Binding Resource.DisplayName}"> 113.                                <CheckBox.ContentTemplate> 114.                                    <DataTemplate> 115.                                        <TextBlock HorizontalAlignment="Stretch" 116.                                                   VerticalAlignment="Stretch" 117.                                                   Text="{Binding Content, RelativeSource={RelativeSource TemplatedParent}}" /> 118.                                    </DataTemplate> 119.                                </CheckBox.ContentTemplate> 120.                            </CheckBox> 121.                        </Grid> 122.                    </DataTemplate> 123.                </telerikInput:RadComboBox.ItemTemplate> 124.            </telerikInput:RadComboBox> 125.        </Grid> 126.    </DataTemplate> 127.    <scheduler:ResourceTypeTemplateSelector x:Key="ItemTemplateSelector" 128.                                            MultipleSelectionTemplate="{StaticResource MultipleSelectionTemplate}" 129.                                            SingleSelectionTemplate="{StaticResource SingleSelectionTemplate}" /> 130.    <!-- end Necessary Windows 7 Theme Resources for EditAppointmentTemplate -->  131.       132.    <ControlTemplate x:Key="EditAppointmentTemplate" 133.                     TargetType="telerikScheduler:AppointmentDialogWindow"> 134.        <StackPanel Background="{TemplateBinding Background}" 135.                    UseLayoutRounding="True"> 136.            <StackPanel Grid.Row="0" 137.                        Orientation="Horizontal" 138.                        Background="{StaticResource RadToolBar_InnerBackground}" 139.                        Grid.ColumnSpan="2" 140.                        Height="0"> 141.                <!-- Recurrence buttons --> 142.                <Border Margin="1,1,0,0" 143.                        Background="#50000000" 144.                        HorizontalAlignment="Left" 145.                        VerticalAlignment="Center" 146.                        Width="2" 147.                        Height="16"> 148.                    <Border Margin="0,0,1,1" 149.                            Background="#80FFFFFF" 150.                            HorizontalAlignment="Left" 151.                            Width="1" /> 152.                </Border> 153.                <Border Margin="1,1,0,0" 154.                        Background="#50000000" 155.                        HorizontalAlignment="Left" 156.                        VerticalAlignment="Center" 157.                        Width="2" 158.                        Height="16"> 159.                    <Border Margin="0,0,1,1" 160.                            Background="#80FFFFFF" 161.                            HorizontalAlignment="Left" 162.                            Width="1" /> 163.                </Border> 164.                <TextBlock telerik:LocalizationManager.ResourceKey="ShowAs" 165.                           VerticalAlignment="Center" 166.                           Margin="5,0,0,0" /> 167.                <telerikInput:RadComboBox ItemsSource="{TemplateBinding TimeMarkers}" 168.                                          Width="100" 169.                                          Height="20" 170.                                          VerticalAlignment="Center" 171.                                          Margin="5,0,0,0" 172.                                          ClearSelectionButtonVisibility="Visible" 173.                                          ClearSelectionButtonContent="Clear" 174.                                          SelectedItem="{Binding TimeMarker,RelativeSource={RelativeSource TemplatedParent},Mode=TwoWay}" 175.                                          telerik:StyleManager.Theme="{StaticResource Theme}"> 176.                    <telerikInput:RadComboBox.ItemTemplate> 177.                        <DataTemplate> 178.                            <StackPanel Orientation="Horizontal"> 179.                                <Rectangle Fill="{Binding TimeMarkerBrush}" 180.                                           Margin="2" 181.                                           Width="12" 182.                                           Height="12" /> 183.                                <TextBlock Text="{Binding TimeMarkerName}" 184.                                           Margin="2" /> 185.                            </StackPanel> 186.                        </DataTemplate> 187.                    </telerikInput:RadComboBox.ItemTemplate> 188.                </telerikInput:RadComboBox> 189.                <telerik:RadToggleButton x:Name="High" 190.                                         BorderThickness="0" 191.                                         Background="{StaticResource RadToolBar_InnerBackground}" 192.                                         DataContext="{TemplateBinding EditedAppointment}" 193.                                         telerik:StyleManager.Theme="{StaticResource Theme}" 194.                                         IsChecked="{Binding Importance,Mode=TwoWay, Converter={StaticResource ImportanceToBooleanConverter},ConverterParameter=High}" 195.                                         Margin="2,2,0,2" 196.                                         Width="23" 197.                                         Height="23" 198.                                         HorizontalContentAlignment="Center" 199.                                         ToolTipService.ToolTip="High importance" 200.                                         CommandParameter="High" 201.                                         Command="telerikScheduler:RadSchedulerCommands.SetAppointmentImportance"> 202.                    <StackPanel HorizontalAlignment="Center"> 203.                        <Path Stretch="Fill" 204.                              Height="10" 205.                              HorizontalAlignment="Center" 206.                              VerticalAlignment="Top" 207.                              Width="5.451" 208.                              Data="M200.39647,58.840393 C200.39337,58.336426 201.14566,57.683922 202.56244,57.684292 C204.06589,57.684685 204.73764,58.357765 204.72783,58.992363 C205.04649,61.795574 203.04713,64.181099 202.47388,66.133446 C201.93753,64.154961 199.9471,61.560352 200.39647,58.840393 z"> 209.                            <Path.Fill> 210.                                <LinearGradientBrush EndPoint="1.059,0.375" 211.                                                     StartPoint="-0.457,0.519"> 212.                                    <GradientStop Color="#FFFF0606" 213.                                                  Offset="0.609" /> 214.                                    <GradientStop Color="#FFBF0303" 215.                                                  Offset="0.927" /> 216.                                </LinearGradientBrush> 217.                            </Path.Fill> 218.                        </Path> 219.                        <Ellipse Height="3" 220.                                 HorizontalAlignment="Center" 221.                                 Margin="0,-1,0,0" 222.                                 VerticalAlignment="Top" 223.                                 Width="3"> 224.                            <Ellipse.Fill> 225.                                <RadialGradientBrush> 226.                                    <GradientStop Color="#FFFF0606" 227.                                                  Offset="0" /> 228.                                    <GradientStop Color="#FFBF0303" 229.                                                  Offset="1" /> 230.                                </RadialGradientBrush> 231.                            </Ellipse.Fill> 232.                        </Ellipse> 233.                    </StackPanel> 234.                </telerik:RadToggleButton> 235.                <telerik:RadToggleButton x:Name="Low" 236.                                         HorizontalContentAlignment="Center" 237.                                         BorderThickness="0" 238.                                         Background="{StaticResource RadToolBar_InnerBackground}" 239.                                         DataContext="{TemplateBinding EditedAppointment}" 240.                                         IsChecked="{Binding Importance,Mode=TwoWay, Converter={StaticResource ImportanceToBooleanConverter},ConverterParameter=Low}" 241.                                         Margin="0,2,0,2" 242.                                         Width="23" 243.                                         Height="23" 244.                                         ToolTipService.ToolTip="Low importance" 245.                                         CommandParameter="Low" 246.                                         telerik:StyleManager.Theme="{StaticResource Theme}" 247.                                         Command="telerikScheduler:RadSchedulerCommands.SetAppointmentImportance"> 248.                    <Path Stretch="Fill" 249.                          Height="12" 250.                          HorizontalAlignment="Center" 251.                          VerticalAlignment="Top" 252.                          Width="9" 253.                          Data="M222.40353,60.139881 L226.65768,60.139843 L226.63687,67.240196 L229.15347,67.240196 L224.37816,71.394943 L219.65274,67.240196 L222.37572,67.219345 z" 254.                          Stroke="#FF0365A7"> 255.                        <Path.Fill> 256.                            <LinearGradientBrush EndPoint="1.059,0.375" 257.                                                 StartPoint="-0.457,0.519"> 258.                                <GradientStop Color="#FFBBE4FF" /> 259.                                <GradientStop Color="#FF024572" 260.                                              Offset="0.836" /> 261.                                <GradientStop Color="#FF43ADF4" 262.                                              Offset="0.466" /> 263.                            </LinearGradientBrush> 264.                        </Path.Fill> 265.                    </Path> 266.                </telerik:RadToggleButton> 267.            </StackPanel > 268.            <Border DataContext="{TemplateBinding EditedAppointment}" 269.                    Background="{Binding Category.CategoryBrush}" 270.                    Visibility="{Binding Category,Converter={StaticResource NullToVisibilityConverter}}" 271.                    CornerRadius="3" 272.                    Height="20" 273.                    Margin="5,10,5,0"> 274.                <TextBlock Text="{Binding Category.DisplayName}" 275.                           VerticalAlignment="Center" 276.                           Margin="5,0,0,0" /> 277.            </Border> 278.            <Grid VerticalAlignment="Stretch" 279.                  HorizontalAlignment="Stretch" 280.                  DataContext="{TemplateBinding EditedAppointment}" 281.                  Background="{TemplateBinding Background}"> 282.                <Grid.RowDefinitions> 283.                    <RowDefinition Height="Auto" /> 284.                    <RowDefinition Height="Auto" /> 285.                    <RowDefinition Height="Auto" /> 286.                    <RowDefinition Height="Auto" /> 287.                    <RowDefinition Height="Auto" /> 288.                    <RowDefinition Height="Auto" /> 289.                    <RowDefinition Height="Auto" /> 290.                    <RowDefinition Height="Auto" /> 291.                    <RowDefinition Height="Auto" /> 292.                    <RowDefinition Height="Auto" /> 293.                </Grid.RowDefinitions> 294.                <Grid.ColumnDefinitions> 295.                    <ColumnDefinition Width="Auto" 296.                                      MinWidth="100" /> 297.                    <ColumnDefinition Width="Auto" 298.                                      MinWidth="200" /> 299.                </Grid.ColumnDefinitions> 300.                <!-- Subject --> 301.                <TextBlock x:Name="SubjectLabel" 302.                           Grid.Row="0" 303.                           Grid.Column="0" 304.                           Margin="0,15,0,2" 305.                           telerik:LocalizationManager.ResourceKey="Subject" 306.                           Style="{StaticResource FormElementTextBlockStyle}" /> 307.                <TextBox x:Name="Subject" 308.                         Grid.Row="0" 309.                         Grid.Column="1" 310.                         MinHeight="22" 311.                         Padding="4 2" 312.                         Width="340" 313.                         HorizontalAlignment="Left" 314.                         Text="{Binding Subject, Mode=TwoWay}" 315.                         MaxLength="255" 316.                         telerik:StyleManager.Theme="{StaticResource Theme}" 317.                         Margin="10,12,20,2" /> 318.                <!-- Description --> 319.                <TextBlock x:Name="DescriptionLabel" 320.                           Grid.Row="1" 321.                           Grid.Column="0" 322.                           Margin="0,13,0,2" 323.                           telerik:LocalizationManager.ResourceKey="Body" 324.                           Style="{StaticResource FormElementTextBlockStyle}" /> 325.                <TextBox x:Name="Body" 326.                         VerticalAlignment="top" 327.                         Grid.Row="1" 328.                         Grid.Column="1" 329.                         Height="Auto" 330.                         MaxHeight="82" 331.                         Width="340" 332.                         HorizontalAlignment="Left" 333.                         MinHeight="22" 334.                         Padding="4 2" 335.                         TextWrapping="Wrap" 336.                         telerik:StyleManager.Theme="{StaticResource Theme}" 337.                         Text="{Binding Body, Mode=TwoWay}" 338.                         AcceptsReturn="true" 339.                         Margin="10,10,20,2" 340.                         HorizontalScrollBarVisibility="Auto" 341.                         VerticalScrollBarVisibility="Auto" /> 342.                <!-- Start/End date --> 343.                <TextBlock x:Name="StartDateLabel" 344.                           Grid.Row="2" 345.                           Grid.Column="0" 346.                           Margin="0,13,0,2" 347.                           telerik:LocalizationManager.ResourceKey="StartTime" 348.                           Style="{StaticResource FormElementTextBlockStyle}" /> 349.                <telerikScheduler:DateTimePicker x:Name="StartDateTime" 350.                                                 Height="22" 351.                                                 Grid.Row="2" 352.                                                 Grid.Column="1" 353.                                                 HorizontalAlignment="Left" 354.                                                 Margin="10,10,20,2" 355.                                                 Style="{StaticResource FormElementStyle}" 356.                                                 SelectedDateTime="{Binding Start, Mode=TwoWay}" 357.                                                 telerikScheduler:StartEndDatePicker.EndPicker="{Binding ElementName=EndDateTime}" 358.                                                 IsTabStop="False" 359.                                                 IsEnabled="False" /> 360.                <TextBlock x:Name="EndDateLabel" 361.                           Grid.Row="3" 362.                           Grid.Column="0" 363.                           Margin="0,13,0,2" 364.                           telerik:LocalizationManager.ResourceKey="EndTime" 365.                           Style="{StaticResource FormElementTextBlockStyle}" /> 366.                <telerikScheduler:DateTimePicker x:Name="EndDateTime" 367.                                                 Height="22" 368.                                                 Grid.Row="3" 369.                                                 Grid.Column="1" 370.                                                 HorizontalAlignment="Left" 371.                                                 Margin="10,10,20,2" 372.                                                 Style="{StaticResource FormElementStyle}" 373.                                                 IsTabStop="False" 374.                                                 IsEnabled="False" 375.                                                 SelectedDateTime="{Binding End, Mode=TwoWay}" /> 376.                <!-- Is-all-day selector --> 377.                <CheckBox x:Name="AllDayEventCheckbox" 378.                          IsChecked="{Binding IsAllDayEvent, Mode=TwoWay}" 379.                          Grid.Row="4" 380.                          Grid.Column="1" 381.                          Margin="10,10,20,2" 382.                          HorizontalAlignment="Left" 383.                          telerik:StyleManager.Theme="{StaticResource Theme}" 384.                          telerik:LocalizationManager.ResourceKey="AllDayEvent"> 385.                    <telerik:CommandManager.InputBindings> 386.                        <telerik:InputBindingCollection> 387.                            <telerik:MouseBinding Command="telerikScheduler:RadSchedulerCommands.ChangeTimePickersVisibility" 388.                                                  Gesture="LeftClick" /> 389.                        </telerik:InputBindingCollection> 390.                    </telerik:CommandManager.InputBindings> 391.                </CheckBox> 392.                <Grid Grid.Row="5" 393.                      Grid.ColumnSpan="2"> 394.                    <Grid.ColumnDefinitions> 395.                        <ColumnDefinition Width="Auto" 396.                                          MinWidth="100" /> 397.                        <ColumnDefinition Width="Auto" 398.                                          MinWidth="200" /> 399.                    </Grid.ColumnDefinitions> 400.                    <Grid.RowDefinitions> 401.                        <RowDefinition Height="Auto" /> 402.                        <RowDefinition Height="Auto" /> 403.                    </Grid.RowDefinitions> 404.                    <TextBlock Text="Applicant" 405.                               Margin="0,13,0,2" 406.                               Style="{StaticResource FormElementTextBlockStyle}" /> 407.                    <telerikInput:RadComboBox IsEditable="False" 408.                                              Grid.Column="1" 409.                                              Height="24" 410.                                              VerticalAlignment="Center" 411.                                              ItemsSource="{Binding Source={StaticResource DataContextProxy}, Path=DataSource.ApplicantList}" 412.                                              SelectedValue="{Binding ApplicantID, Mode=TwoWay}" 413.                                              SelectedValuePath="ApplicantID" 414.                                              DisplayMemberPath="FirstName" /> 415.                       416.                    <TextBlock Text="Job" 417.                               Margin="0,13,0,2" 418.                               Grid.Row="1" 419.                               Style="{StaticResource FormElementTextBlockStyle}" /> 420.                    <telerikInput:RadComboBox IsEditable="False" 421.                                              Grid.Column="1" 422.                                              Grid.Row="1" 423.                                              Height="24" 424.                                              VerticalAlignment="Center" 425.                                              ItemsSource="{Binding Source={StaticResource DataContextProxy}, Path=DataSource.JobsList}" 426.                                              SelectedValue="{Binding PostingID, Mode=TwoWay}" 427.                                              SelectedValuePath="PostingID" 428.                                              DisplayMemberPath="JobTitle"/> 429.                </Grid> 430.                    <!-- Resources --> 431.                <Grid x:Name="ResourcesLayout" 432.                      Grid.Row="7" 433.                      Grid.Column="0" 434.                      Grid.ColumnSpan="2" 435.                      MaxHeight="130" 436.                      Margin="20,5,20,0"> 437.                    <Border Margin="0" 438.                            BorderThickness="1" 439.                            BorderBrush="{StaticResource GenericShallowBorderBrush}" 440.                            Visibility="{Binding ElementName=ResourcesScrollViewer, Path=ComputedVerticalScrollBarVisibility}"></Border> 441.                    <ScrollViewer x:Name="ResourcesScrollViewer" 442.                                  IsTabStop="false" 443.                                  Grid.Row="6" 444.                                  Grid.Column="0" 445.                                  Grid.ColumnSpan="2" 446.                                  Margin="1" 447.                                  telerik:StyleManager.Theme="{StaticResource Theme}" 448.                                  VerticalScrollBarVisibility="Auto"> 449.                        <scheduler:ResourcesItemsControl x:Name="PART_Resources" 450.                                                         HorizontalAlignment="Left" 451.                                                         Padding="0,2,0,5" 452.                                                         IsTabStop="false" 453.                                                         ItemsSource="{TemplateBinding ResourceTypeModels}" 454.                                                         ItemTemplateSelector="{StaticResource ItemTemplateSelector}" /> 455.                    </ScrollViewer> 456.                </Grid> 457.                <StackPanel x:Name="FooterControls" 458.                            Margin="5 10 10 10" 459.                            Grid.Row="8" 460.                            Grid.Column="1" 461.                            HorizontalAlignment="Left" 462.                            Orientation="Horizontal"> 463.                    <telerik:RadButton x:Name="OKButton" 464.                                       Margin="5" 465.                                       Padding="10 0" 466.                                       MinWidth="80" 467.                                       Command="telerikScheduler:RadSchedulerCommands.SaveAppointment" 468.                                       telerik:StyleManager.Theme="{StaticResource Theme}" 469.                                       telerikNavigation:RadWindow.ResponseButton="Accept" 470.                                       telerik:LocalizationManager.ResourceKey="SaveAndCloseCommandText"> 471.                    </telerik:RadButton> 472.                    <telerik:RadButton x:Name="CancelButton" 473.                                       Margin="5" 474.                                       Padding="10 0" 475.                                       MinWidth="80" 476.                                       telerik:LocalizationManager.ResourceKey="Cancel" 477.                                       telerik:StyleManager.Theme="{StaticResource Theme}" 478.                                       telerikNavigation:RadWindow.ResponseButton="Cancel" 479.                                       Command="telerik:WindowCommands.Close"> 480.                    </telerik:RadButton> 481.                </StackPanel> 482.            </Grid> 483.            <vsm:VisualStateManager.VisualStateGroups> 484.                <vsm:VisualStateGroup x:Name="RecurrenceRuleState"> 485.                    <vsm:VisualState x:Name="RecurrenceRuleIsNull"> 486.                        <Storyboard> 487.                            <ObjectAnimationUsingKeyFrames Storyboard.TargetName="StartDateTime" 488.                                                           Storyboard.TargetProperty="IsEnabled" 489.                                                           Duration="0"> 490.                                <DiscreteObjectKeyFrame KeyTime="0" 491.                                                        Value="True" /> 492.                            </ObjectAnimationUsingKeyFrames> 493.                            <ObjectAnimationUsingKeyFrames Storyboard.TargetName="EndDateTime" 494.                                                           Storyboard.TargetProperty="IsEnabled" 495.                                                           Duration="0"> 496.                                <DiscreteObjectKeyFrame KeyTime="0" 497.                                                        Value="True" /> 498.                            </ObjectAnimationUsingKeyFrames> 499.                            <ObjectAnimationUsingKeyFrames Storyboard.TargetName="AllDayEventCheckbox" 500.                                                           Storyboard.TargetProperty="IsEnabled" 501.                                                           Duration="0"> 502.                                <DiscreteObjectKeyFrame KeyTime="0" 503.                                                        Value="True" /> 504.                            </ObjectAnimationUsingKeyFrames> 505.                        </Storyboard> 506.                    </vsm:VisualState> 507.                    <vsm:VisualState x:Name="RecurrenceRuleIsNotNull"> 508.                        <Storyboard> 509.                            <ObjectAnimationUsingKeyFrames Storyboard.TargetName="StartDateTime" 510.                                                           Storyboard.TargetProperty="IsEnabled" 511.                                                           Duration="0"> 512.                                <DiscreteObjectKeyFrame KeyTime="0" 513.                                                        Value="False" /> 514.                            </ObjectAnimationUsingKeyFrames> 515.                            <ObjectAnimationUsingKeyFrames Storyboard.TargetName="EndDateTime" 516.                                                           Storyboard.TargetProperty="IsEnabled" 517.                                                           Duration="0"> 518.                                <DiscreteObjectKeyFrame KeyTime="0" 519.                                                        Value="False" /> 520.                            </ObjectAnimationUsingKeyFrames> 521.                            <ObjectAnimationUsingKeyFrames Storyboard.TargetName="AllDayEventCheckbox" 522.                                                           Storyboard.TargetProperty="IsEnabled" 523.                                                           Duration="0"> 524.                                <DiscreteObjectKeyFrame KeyTime="0" 525.                                                        Value="False" /> 526.                            </ObjectAnimationUsingKeyFrames> 527.                        </Storyboard> 528.                    </vsm:VisualState> 529.                </vsm:VisualStateGroup> 530.            </vsm:VisualStateManager.VisualStateGroups> 531.        </StackPanel> 532.    </ControlTemplate> 533.    <DataTemplate x:Key="AppointmentDialogWindowHeaderDataTemplate"> 534.        <StackPanel Orientation="Horizontal" 535.                    MaxWidth="400"> 536.            <TextBlock telerik:LocalizationManager.ResourceKey="Event" 537.                       Visibility="{Binding Appointment.IsAllDayEvent, Converter={StaticResource BooleanToVisibilityConverter}}" /> 538.            <TextBlock telerik:LocalizationManager.ResourceKey="Appointment" 539.                       Visibility="{Binding Appointment.IsAllDayEvent, Converter={StaticResource InvertedBooleanToVisibilityConverter}}" /> 540.            <TextBlock Text=" - " /> 541.            <TextBlock x:Name="SubjectTextBlock" 542.                       Visibility="{Binding Appointment.Subject, Converter={StaticResource NullToVisibilityConverter}}" 543.                       Text="{Binding Appointment.Subject}" /> 544.            <TextBlock telerik:LocalizationManager.ResourceKey="Untitled" 545.                       Visibility="{Binding Appointment.Subject, Converter={StaticResource InvertedNullToVisibilityConverter}}" /> 546.        </StackPanel> 547.    </DataTemplate> 548.    <Style x:Key="EditAppointmentStyle" 549.           TargetType="telerikScheduler:AppointmentDialogWindow"> 550.        <Setter Property="IconTemplate" 551.                Value="{StaticResource IconDataEditTemplate}" /> 552.        <Setter Property="HeaderTemplate" 553.                Value="{StaticResource AppointmentDialogWindowHeaderDataTemplate}" /> 554.        <Setter Property="Background" 555.                Value="{StaticResource DialogWindowBackground}" /> 556.        <Setter Property="Template" 557.                Value="{StaticResource EditAppointmentTemplate}" /> 558.    </Style> 559.</UserControl.Resources> The first line there is the DataContextProxy I mentioned previously- we use that again to work a bit of magic in this template. Where we start getting into the dialog in question is line 132, but line 407 is where things start getting interesting.  The ItemsSource is pointing at a list that exists in my ViewModel (or code-behind, if it is used as a DataContext), the SelectedValue is the item I am actually binding from the applicant (note the TwoWay binding), and SelectedValuePath and DisplayMemberPath ensure the proper applicant is being displayed from the collection.  You will also see similar starting on line 420 where I do the same for the Jobs we'll be displaying. Just to wrap-up the Xaml, here's the RadScheduler declaraction that ties this all together and will be the main focus of our view: 01.<telerikScheduler:RadScheduler x:Name="xJobsScheduler" 02.                  Grid.Row="1" 03.                  Grid.Column="1" 04.                  Width="800" 05.                  MinWidth="600" 06.                  Height="500" 07.                  MinHeight="300" 08.                  AppointmentsSource="{Binding Interviews}" 09.                  EditAppointmentStyle="{StaticResource EditAppointmentStyle}" 10.                  command:AppointmentAddedEventClass.Command="{Binding AddAppointmentCommand}" 11.                  command:ApptCreatedEventClass.Command="{Binding ApptCreatingCommand}" 12.                  command:ApptEditedEventClass.Command="{Binding ApptEditedCommand}" 13.                  command:ApptDeletedEventClass.Command="{Binding ApptDeletedCommand}"> 14.</telerikScheduler:RadScheduler> Now, we get to the ViewModel and what it takes to get that rigged up.  And for those of you who remember the jobs post, those command:s in the Xaml are pointing to attached behavior commands that reproduce the respective events.  This becomes very handy when we're setting up the code-behind version. ;) ViewModel I've been liking this approach so far, so I'm going to put the entire ViewModel here and then go into the lines of interest.  Of course, feel free to ask me questions about anything that isn't clear (by line number, ideally) so I can help out if I have missed anything important: 001.public class SchedulerViewModel : ViewModelBase 002.{ 003.    private readonly IEventAggregator eventAggregator; 004.    private readonly IRegionManager regionManager; 005.   006.    public RecruitingContext context; 007.   008.    private ObservableItemCollection<InterviewAppointment> _interviews = new ObservableItemCollection<InterviewAppointment>(); 009.    public ObservableItemCollection<InterviewAppointment> Interviews 010.    { 011.        get { return _interviews; } 012.        set 013.        { 014.            if (_interviews != value) 015.            { 016.                _interviews = value; 017.                NotifyChanged("Interviews"); 018.            } 019.        } 020.    } 021.   022.    private QueryableCollectionView _jobsList; 023.    public QueryableCollectionView JobsList 024.    { 025.        get { return this._jobsList; } 026.        set 027.        { 028.            if (this._jobsList != value) 029.            { 030.                this._jobsList = value; 031.                this.NotifyChanged("JobsList"); 032.            } 033.        } 034.    } 035.   036.    private QueryableCollectionView _applicantList; 037.    public QueryableCollectionView ApplicantList 038.    { 039.        get { return _applicantList; } 040.        set 041.        { 042.            if (_applicantList != value) 043.            { 044.                _applicantList = value; 045.                NotifyChanged("ApplicantList"); 046.            } 047.        } 048.    } 049.   050.    public DelegateCommand<object> AddAppointmentCommand { get; set; } 051.    public DelegateCommand<object> ApptCreatingCommand { get; set; } 052.    public DelegateCommand<object> ApptEditedCommand { get; set; } 053.    public DelegateCommand<object> ApptDeletedCommand { get; set; } 054.   055.    public SchedulerViewModel(IEventAggregator eventAgg, IRegionManager regionmanager) 056.    { 057.        // set Unity items 058.        this.eventAggregator = eventAgg; 059.        this.regionManager = regionmanager; 060.   061.        // load our context 062.        context = new RecruitingContext(); 063.        LoadOperation<Interview> loadOp = context.Load(context.GetInterviewsQuery()); 064.        loadOp.Completed += new EventHandler(loadOp_Completed); 065.   066.        this._jobsList = new QueryableCollectionView(context.JobPostings); 067.        context.Load(context.GetJobPostingsQuery()); 068.   069.        this._applicantList = new QueryableCollectionView(context.Applicants); 070.        context.Load(context.GetApplicantsQuery()); 071.   072.        AddAppointmentCommand = new DelegateCommand<object>(this.AddAppt); 073.        ApptCreatingCommand = new DelegateCommand<object>(this.ApptCreating); 074.        ApptEditedCommand = new DelegateCommand<object>(this.ApptEdited); 075.        ApptDeletedCommand = new DelegateCommand<object>(this.ApptDeleted); 076.   077.    } 078.   079.    void loadOp_Completed(object sender, EventArgs e) 080.    { 081.        LoadOperation loadop = sender as LoadOperation; 082.   083.        foreach (var ent in loadop.Entities) 084.        { 085.            _interviews.Add(EntityToAppointment(ent as Interview)); 086.        } 087.    } 088.   089.    #region Appointment Adding 090.   091.    public void AddAppt(object obj) 092.    { 093.        // now we have a new InterviewAppointment to add to our QCV :) 094.        InterviewAppointment newInterview = obj as InterviewAppointment; 095.   096.        this.context.Interviews.Add(AppointmentToEntity(newInterview)); 097.        this.context.SubmitChanges((s) => 098.        { 099.            ActionHistory myAction = new ActionHistory(); 100.            myAction.InterviewID = newInterview.InterviewID; 101.            myAction.PostingID = newInterview.PostingID; 102.            myAction.ApplicantID = newInterview.ApplicantID; 103.            myAction.Description = String.Format("Interview with {0} has been created by {1}", newInterview.ApplicantID.ToString(), "default user"); 104.            myAction.TimeStamp = DateTime.Now; 105.            eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); 106.        } 107.            , null); 108.    } 109.   110.    public void ApptCreating(object obj) 111.    { 112.        // handled in the behavior, just a placeholder to ensure it runs :) 113.    } 114.   115.    #endregion 116.   117.    #region Appointment Editing 118.   119.    public void ApptEdited(object obj) 120.    { 121.        Interview editedInterview = (from x in context.Interviews 122.                            where x.InterviewID == (obj as InterviewAppointment).InterviewID 123.                            select x).SingleOrDefault(); 124.   125.        CopyAppointmentEdit(editedInterview, obj as InterviewAppointment); 126.   127.        context.SubmitChanges((s) => { 128.            ActionHistory myAction = new ActionHistory(); 129.            myAction.InterviewID = editedInterview.InterviewID; 130.            myAction.PostingID = editedInterview.PostingID; 131.            myAction.ApplicantID = editedInterview.ApplicantID; 132.            myAction.Description = String.Format("Interview with {0} has been modified by {1}", editedInterview.ApplicantID.ToString(), "default user"); 133.            myAction.TimeStamp = DateTime.Now; 134.            eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); } 135.            , null); 136.    } 137.   138.    #endregion 139.   140.    #region Appointment Deleting 141.   142.    public void ApptDeleted(object obj) 143.    { 144.        Interview deletedInterview = (from x in context.Interviews 145.                                      where x.InterviewID == (obj as InterviewAppointment).InterviewID 146.                                      select x).SingleOrDefault(); 147.   148.        context.Interviews.Remove(deletedInterview); 149.        context.SubmitChanges((s) => 150.        { 151.            ActionHistory myAction = new ActionHistory(); 152.            myAction.InterviewID = deletedInterview.InterviewID; 153.            myAction.PostingID = deletedInterview.PostingID; 154.            myAction.ApplicantID = deletedInterview.ApplicantID; 155.            myAction.Description = String.Format("Interview with {0} has been deleted by {1}", deletedInterview.ApplicantID.ToString(), "default user"); 156.            myAction.TimeStamp = DateTime.Now; 157.            eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); 158.        } 159.            , null); 160.    } 161.   162.    #endregion 163.   164.    #region Appointment Helpers :) 165.   166.    public Interview AppointmentToEntity(InterviewAppointment ia) 167.    { 168.        Interview newInterview = new Interview(); 169.        newInterview.Subject = ia.Subject; 170.        newInterview.Body = ia.Body; 171.        newInterview.Start = ia.Start; 172.        newInterview.End = ia.End; 173.        newInterview.ApplicantID = ia.ApplicantID; 174.        newInterview.PostingID = ia.PostingID; 175.        newInterview.InterviewID = ia.InterviewID; 176.   177.        return newInterview; 178.    } 179.   180.    public InterviewAppointment EntityToAppointment(Interview ia) 181.    { 182.        InterviewAppointment newInterview = new InterviewAppointment(); 183.        newInterview.Subject = ia.Subject; 184.        newInterview.Body = ia.Body; 185.        newInterview.Start = ia.Start; 186.        newInterview.End = ia.End; 187.        newInterview.ApplicantID = ia.ApplicantID; 188.        newInterview.PostingID = ia.PostingID; 189.        newInterview.InterviewID = ia.InterviewID; 190.   191.        return newInterview; 192.    } 193.   194.    public void CopyAppointmentEdit(Interview entityInterview, InterviewAppointment appointmentInterview) 195.    { 196.        entityInterview.Subject = appointmentInterview.Subject; 197.        entityInterview.Body = appointmentInterview.Body; 198.        entityInterview.Start = appointmentInterview.Start; 199.        entityInterview.End = appointmentInterview.End; 200.        entityInterview.ApplicantID = appointmentInterview.ApplicantID; 201.        entityInterview.PostingID = appointmentInterview.PostingID; 202.    } 203.   204.    #endregion 205.} One thing we're doing here which you won't see in any of the other ViewModels is creating a duplicate collection.  I know this is something which will be fixed down the line for using RadScheduler, simplifying this process, but with WCF RIA changing as it does I wanted to ensure functionality would remain consistent as I continued development on this application.  So, I do a little bit of duplication, but for the greater good.  This all takes place starting on line 79, so for every entity that comes back we add it to the collection that is bound to RadScheduler.  Otherwise, the DelegateCommands that you see correspond directly to the events they are named after.  In each case, rather than sending over the full event arguments, I just send in the appointment in question (coming through as the object obj in all cases) so I can add (line 91), edit (line 119), and delete appointments (line 142) like normal.  This just ensures they get updated back to my database.  Also, the one bit of code you won't see is for the Appointment Creating (line 110) event- that is because in the command I've created I simply make the replacement I need to: 1.void element_AppointmentCreating(object sender, AppointmentCreatingEventArgs e) 2.{ 3.    e.NewAppointment = new InterviewAppointment(); 4.    base.ExecuteCommand(); 5.} And the ViewModel is none the wiser, the appointments just work as far as it is concerned since as they are created they become InterviewAppointments.  End result?  I've customized my EditAppointmentDialog as follows: And adding, editing, and deleting appointments works like a charm.  I can even 'edit' by moving appointments around RadScheduler, so as they are dropped into a timeslot they perform their full edit routine and things get updated. And then, the Code-Behind Version Perhaps the thing I like the most about doing one then the other is I get to steal 90% or more of the code from the MVVM version.  For example, the only real changes to the Code-Behind Xaml file exist in the control declaration, in which I use events instead of attached-behavior-event-commands: 01.<telerikScheduler:RadScheduler x:Name="xJobsScheduler" 02.                  Grid.Row="1" 03.                  Grid.Column="1" 04.                  Width="800" 05.                  MinWidth="600" 06.                  Height="500" 07.                  MinHeight="300" 08.                  EditAppointmentStyle="{StaticResource EditAppointmentStyle}" 09.                  AppointmentAdded="xJobsScheduler_AppointmentAdded" 10.                  AppointmentCreating="xJobsScheduler_AppointmentCreating" 11.                  AppointmentEdited="xJobsScheduler_AppointmentEdited" 12.                  AppointmentDeleted="xJobsScheduler_AppointmentDeleted"> 13.</telerikScheduler:RadScheduler> Easy, right?  Otherwise, all the same styling in UserControl.Resources was re-used, right down to the DataContextProxy that lets us bind to a collection from our viewmodel (in this case, our code-behind) to use within the DataTemplate.  The code conversion gets even easier, as I could literally copy and paste almost everything from the ViewModel to my Code-Behind, just a matter of pasting the right section into the right event.  Here's the code-behind as proof: 001.public partial class SchedulingView : UserControl, INotifyPropertyChanged 002.{ 003.    public RecruitingContext context; 004.   005.    private QueryableCollectionView _jobsList; 006.    public QueryableCollectionView JobsList 007.    { 008.        get { return this._jobsList; } 009.        set 010.        { 011.            if (this._jobsList != value) 012.            { 013.                this._jobsList = value; 014.                this.NotifyChanged("JobsList"); 015.            } 016.        } 017.    } 018.   019.    private QueryableCollectionView _applicantList; 020.    public QueryableCollectionView ApplicantList 021.    { 022.        get { return _applicantList; } 023.        set 024.        { 025.            if (_applicantList != value) 026.            { 027.                _applicantList = value; 028.                NotifyChanged("ApplicantList"); 029.            } 030.        } 031.    } 032.   033.    private ObservableItemCollection<InterviewAppointment> _interviews = new ObservableItemCollection<InterviewAppointment>(); 034.    public ObservableItemCollection<InterviewAppointment> Interviews 035.    { 036.        get { return _interviews; } 037.        set 038.        { 039.            if (_interviews != value) 040.            { 041.                _interviews = value; 042.                NotifyChanged("Interviews"); 043.            } 044.        } 045.    } 046.   047.    public SchedulingView() 048.    { 049.        InitializeComponent(); 050.   051.        this.DataContext = this; 052.   053.        this.Loaded += new RoutedEventHandler(SchedulingView_Loaded); 054.    } 055.   056.    void SchedulingView_Loaded(object sender, RoutedEventArgs e) 057.    { 058.        this.xJobsScheduler.AppointmentsSource = Interviews; 059.   060.        context = new RecruitingContext(); 061.           062.        LoadOperation loadop = context.Load(context.GetInterviewsQuery()); 063.        loadop.Completed += new EventHandler(loadop_Completed); 064.   065.        this._applicantList = new QueryableCollectionView(context.Applicants); 066.        context.Load(context.GetApplicantsQuery()); 067.   068.        this._jobsList = new QueryableCollectionView(context.JobPostings); 069.        context.Load(context.GetJobPostingsQuery()); 070.    } 071.   072.    void loadop_Completed(object sender, EventArgs e) 073.    { 074.        LoadOperation loadop = sender as LoadOperation; 075.   076.        _interviews.Clear(); 077.   078.        foreach (var ent in loadop.Entities) 079.        { 080.            _interviews.Add(EntityToAppointment(ent as Interview)); 081.        } 082.    } 083.   084.    private void xJobsScheduler_AppointmentAdded(object sender, Telerik.Windows.Controls.AppointmentAddedEventArgs e) 085.    { 086.        // now we have a new InterviewAppointment to add to our QCV :) 087.        InterviewAppointment newInterview = e.Appointment as InterviewAppointment; 088.   089.        this.context.Interviews.Add(AppointmentToEntity(newInterview)); 090.        this.context.SubmitChanges((s) => 091.        { 092.            ActionHistory myAction = new ActionHistory(); 093.            myAction.InterviewID = newInterview.InterviewID; 094.            myAction.PostingID = newInterview.PostingID; 095.            myAction.ApplicantID = newInterview.ApplicantID; 096.            myAction.Description = String.Format("Interview with {0} has been created by {1}", newInterview.ApplicantID.ToString(), "default user"); 097.            myAction.TimeStamp = DateTime.Now; 098.            context.ActionHistories.Add(myAction); 099.            context.SubmitChanges(); 100.        } 101.            , null); 102.    } 103.   104.    private void xJobsScheduler_AppointmentCreating(object sender, Telerik.Windows.Controls.AppointmentCreatingEventArgs e) 105.    { 106.        e.NewAppointment = new InterviewAppointment(); 107.    } 108.   109.    private void xJobsScheduler_AppointmentEdited(object sender, Telerik.Windows.Controls.AppointmentEditedEventArgs e) 110.    { 111.        Interview editedInterview = (from x in context.Interviews 112.                                     where x.InterviewID == (e.Appointment as InterviewAppointment).InterviewID 113.                                     select x).SingleOrDefault(); 114.   115.        CopyAppointmentEdit(editedInterview, e.Appointment as InterviewAppointment); 116.   117.        context.SubmitChanges((s) => 118.        { 119.            ActionHistory myAction = new ActionHistory(); 120.            myAction.InterviewID = editedInterview.InterviewID; 121.            myAction.PostingID = editedInterview.PostingID; 122.            myAction.ApplicantID = editedInterview.ApplicantID; 123.            myAction.Description = String.Format("Interview with {0} has been modified by {1}", editedInterview.ApplicantID.ToString(), "default user"); 124.            myAction.TimeStamp = DateTime.Now; 125.            context.ActionHistories.Add(myAction); 126.            context.SubmitChanges(); 127.        } 128.            , null); 129.    } 130.   131.    private void xJobsScheduler_AppointmentDeleted(object sender, Telerik.Windows.Controls.AppointmentDeletedEventArgs e) 132.    { 133.        Interview deletedInterview = (from x in context.Interviews 134.                                      where x.InterviewID == (e.Appointment as InterviewAppointment).InterviewID 135.                                      select x).SingleOrDefault(); 136.   137.        context.Interviews.Remove(deletedInterview); 138.        context.SubmitChanges((s) => 139.        { 140.            ActionHistory myAction = new ActionHistory(); 141.            myAction.InterviewID = deletedInterview.InterviewID; 142.            myAction.PostingID = deletedInterview.PostingID; 143.            myAction.ApplicantID = deletedInterview.ApplicantID; 144.            myAction.Description = String.Format("Interview with {0} has been deleted by {1}", deletedInterview.ApplicantID.ToString(), "default user"); 145.            myAction.TimeStamp = DateTime.Now; 146.            context.ActionHistories.Add(myAction); 147.            context.SubmitChanges(); 148.        } 149.            , null); 150.    } 151.   152.    #region Appointment Helpers :) 153.   154.    public Interview AppointmentToEntity(InterviewAppointment ia) 155.    { 156.        Interview newInterview = new Interview(); 157.        newInterview.Subject = ia.Subject; 158.        newInterview.Body = ia.Body; 159.        newInterview.Start = ia.Start; 160.        newInterview.End = ia.End; 161.        newInterview.ApplicantID = ia.ApplicantID; 162.        newInterview.PostingID = ia.PostingID; 163.        newInterview.InterviewID = ia.InterviewID; 164.   165.        return newInterview; 166.    } 167.   168.    public InterviewAppointment EntityToAppointment(Interview ia) 169.    { 170.        InterviewAppointment newInterview = new InterviewAppointment(); 171.        newInterview.Subject = ia.Subject; 172.        newInterview.Body = ia.Body; 173.        newInterview.Start = ia.Start; 174.        newInterview.End = ia.End; 175.        newInterview.ApplicantID = ia.ApplicantID; 176.        newInterview.PostingID = ia.PostingID; 177.        newInterview.InterviewID = ia.InterviewID; 178.   179.        return newInterview; 180.    } 181.   182.    public void CopyAppointmentEdit(Interview entityInterview, InterviewAppointment appointmentInterview) 183.    { 184.        entityInterview.Subject = appointmentInterview.Subject; 185.        entityInterview.Body = appointmentInterview.Body; 186.        entityInterview.Start = appointmentInterview.Start; 187.        entityInterview.End = appointmentInterview.End; 188.        entityInterview.ApplicantID = appointmentInterview.ApplicantID; 189.        entityInterview.PostingID = appointmentInterview.PostingID; 190.    } 191.   192.    #endregion 193.   194.    #region INotifyPropertyChanged Members 195.   196.    public event PropertyChangedEventHandler PropertyChanged; 197.   198.    public void NotifyChanged(string propertyName) 199.    { 200.        if (string.IsNullOrEmpty(propertyName)) 201.            throw new ArgumentException("propertyName"); 202.   203.        PropertyChanged(this, new PropertyChangedEventArgs(propertyName)); 204.    } 205.   206.    #endregion 207.} Nice... right? :) One really important thing to note as well.  See on line 51 where I set the DataContext before the Loaded event?  This is super important, as if you don't have this set before the usercontrol is loaded, the DataContextProxy has no context to use and your EditAppointmentDialog Job/Applicant dropdowns will be blank and empty.  Trust me on this, took a little bit of debugging to figure out that by setting the DataContext post-loaded would only lead to disaster and frustration.  Otherwise, the only other real difference is that instead of sending an ActionHistory item through an event to get added to the database and saved, I do those right in the callback from submitting.  The Result Again, I only have to post one picture because these bad boys used nearly identical code for both the MVVM and the code-behind views, so our end result is... So what have we learned here today?  One, for the most part this MVVM thing is somewhat easy.  Yeah, you sometimes have to write a bunch of extra code, but with the help of a few useful snippits you can turn the process into a pretty streamlined little workflow.  Heck, this story gets even easier as you can see in this blog post by Michael Washington- specifically run a find on 'InvokeCommandAction' and you'll see the section regarding the command on TreeView in Blend 4.  Brilliant!  MVVM never looked so sweet! Otherwise, it is business as usual with RadScheduler for Silverlight whichever path you're choosing for your development.  Between now and the next post, I'll be cleaning up styles a bit (those RadComboBoxes are a little too close to my labels!) and adding some to the RowDetailsViews for Applicants and Jobs, so you can see all the info for an appointment in the dropdown tab view.  Otherwise, we're about ready to call a wrap on this oneDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Create and Consume WCF service using Visual Studio 2010

  - by sreejukg

  In this article I am going to demonstrate how to create a WCF service, that can be hosted inside IIS and a windows application that consume the WCF service. To support service oriented architecture, Microsoft developed the programming model named Windows Communication Foundation (WCF). ASMX was the prior version from Microsoft, was completely based on XML and .Net framework continues to support ASMX web services in future versions also. While ASMX web services was the first step towards the service oriented architecture, Microsoft has made a big step forward by introducing WCF. An overview of planning for WCF can be found from this link http://msdn.microsoft.com/en-us/library/ff649584.aspx . The following are the important differences between WCF and ASMX from an asp.net developer point of view. 1. ASMX web services are easy to write, configure and consume 2. ASMX web services are only hosted in IIS 3. ASMX web services can only use http 4. WCF, can be hosted inside IIS, windows service, console application, WAS(Windows Process Activation Service) etc 5. WCF can be used with HTTP, TCP/IP, MSMQ and other protocols. The detailed difference between ASMX web service and WCF can be found here. http://msdn.microsoft.com/en-us/library/cc304771.aspx Though WCF is a bigger step for future, Visual Studio makes it simpler to create, publish and consume the WCF service. In this demonstration, I am going to create a service named SayHello that accepts 2 parameters such as name and language code. The service will return a hello to user name that corresponds to the language. So the proposed service usage is as follows. Caller: SayHello(“Sreeju”, “en”) -> return value -> Hello Sreeju Caller: SayHello(“???”, “ar”) -> return value -> ????? ??? Caller: SayHello(“Sreeju”, “es”) - > return value -> Hola Sreeju Note: calling an automated translation service is not the intention of this article. If you are interested, you can find bing translator API and can use in your application. http://www.microsofttranslator.com/dev/ So Let us start First I am going to create a Service Application that offer the SayHello Service. Open Visual Studio 2010, Go to File -> New Project, from your preferred language from the templates section select WCF, select WCF service application as the project type, give the project a name(I named it as HelloService), click ok so that visual studio will create the project for you. In this demonstration, I have used C# as the programming language. Visual studio will create the necessary files for you to start with. By default it will create a service with name Service1.svc and there will be an interface named IService.cs. The screenshot for the project in solution explorer is as follows Since I want to demonstrate how to create new service, I deleted Service1.Svc and IService1.cs files from the project by right click the file and select delete. Now in the project there is no service available, I am going to create one. From the solution explorer, right click the project, select Add -> New Item Add new item dialog will appear to you. Select WCF service from the list, give the name as HelloService.svc, and click on the Add button. Now Visual studio will create 2 files with name IHelloService.cs and HelloService.svc. These files are basically the service definition (IHelloService.cs) and the service implementation (HelloService.svc). Let us examine the IHelloService interface. The code state that IHelloService is the service definition and it provides an operation/method (similar to web method in ASMX web services) named DoWork(). Any WCF service will have a definition file as an Interface that defines the service. Let us see what is inside HelloService.svc The code illustrated is implementing the interface IHelloService. The code is self-explanatory; the HelloService class needs to implement all the methods defined in the Service Definition. Let me do the service as I require. Open IHelloService.cs in visual studio, and delete the DoWork() method and add a definition for SayHello(), do not forget to add OperationContract attribute to the method. The modified IHelloService.cs will look as follows Now implement the SayHello method in the HelloService.svc.cs file. Here I wrote the code for SayHello method as follows. I am done with the service. Now you can build and run the service by clicking f5 (or selecting start debugging from the debug menu). Visual studio will host the service in give you a client to test it. The screenshot is as follows. In the left pane, it shows the services available in the server and in right side you can invoke the service. To test the service sayHello, double click on it from the above window. It will ask you to enter the parameters and click on the invoke button. See a sample output below. Now I have done with the service. The next step is to write a service client. Creating a consumer application involves 2 steps. One generating the class and configuration file corresponds to the service. Create a project that utilizes the generated class and configuration file. First I am going to generate the class and configuration file. There is a great tool available with Visual Studio named svcutil.exe, this tool will create the necessary class and configuration files for you. Read the documentation for the svcutil.exe here http://msdn.microsoft.com/en-us/library/aa347733.aspx . Open Visual studio command prompt, you can find it under Start Menu -> All Programs -> Visual Studio 2010 -> Visual Studio Tools -> Visual Studio command prompt Make sure the service is in running state in visual studio. Note the url for the service(from the running window, you can right click and choose copy address). Now from the command prompt, enter the svcutil.exe command as follows. I have mentioned the url and the /d switch – for the directory to store the output files(In this case d:\temp). If you are using windows drive(in my case it is c: ) , make sure you open the command prompt with run as administrator option, otherwise you will get permission error(Only in windows 7 or windows vista). The tool has created 2 files, HelloService.cs and output.config. Now the next step is to create a new project and use the created files and consume the service. Let us do that now. I am going to add a console application to the current solution. Right click solution name in the solution explorer, right click, Add-> New Project Under Visual C#, select console application, give the project a name, I named it TestService Now navigate to d:\temp where I generated the files with the svcutil.exe. Rename output.config to app.config. Next step is to add both files (d:\temp\helloservice.cs and app.config) to the files. In the solution explorer, right click the project, Add -> Add existing item, browse to the d:\temp folder, select the 2 files as mentioned before, click on the add button. Now you need to add a reference to the System.ServiceModel to the project. From solution explorer, right click the references under testservice project, select Add reference. In the Add reference dialog, select the .Net tab, select System.ServiceModel, and click ok Now open program.cs by double clicking on it and add the code to consume the web service to the main method. The modified file looks as follows Right click the testservice project and set as startup project. Click f5 to run the project. See the sample output as follows Publishing WCF service under IIS is similar to publishing ASP.Net application. Publish the application to a folder using Visual studio publishing feature, create a virtual directory and create it as an application. Don’t forget to set the application pool to use ASP.Net version 4. One last thing you need to check is the app.config file you have added to the solution. See the element client under ServiceModel element. There is an endpoint element with address attribute that points to the published service URL. If you permanently host the service under IIS, you can simply change the address parameter to the corresponding one and your application will consume the service. You have seen how easily you can build/consume WCF service. If you need the solution in zipped format, please post your email below.

  Read the article

• Quartz.Net Writing your first Hello World Job

  - by Tarun Arora

  In this blog post I’ll be covering, 01: A few things to consider before you should schedule a Job using Quartz.Net 02: Setting up your solution to use Quartz.Net API 03: Quartz.Net configuration 04: Writing & scheduling a hello world job with Quartz.Net If you are new to Quartz.Net I would recommend going through, A brief introduction to Quartz.net Walkthrough of Installing & Testing Quartz.Net as a Windows Service A few things to consider before you should schedule a Job using Quartz.Net - An instance of the scheduler service - A trigger - And last but not the least a job For example, if I wanted to schedule a script to run on the server, I should be jotting down answers to the below questions, a. Considering there are multiple machines set up with Quartz.Net windows service, how can I choose the instance of Quartz.Net where I want my script to be run b. What will trigger the execution of the job c. How often do I want the job to run d. Do I want the job to run right away or start after a delay or may be have the job start at a specific time e. What will happen to my job if Quartz.Net windows service is reset f. Do I want multiple instances of this job to run concurrently g. Can I pass parameters to the job being executed by Quartz.Net windows service Setting up your solution to use Quartz.Net API 1. Create a new C# Console Application project and call it “HelloWorldQuartzDotNet” and add a reference to Quartz.Net.dll. I use the NuGet Package Manager to add the reference. This can be done by right clicking references and choosing Manage NuGet packages, from the Nuget Package Manager choose Online from the left panel and in the search box on the right search for Quartz.Net. Click Install on the package “Quartz” (Screen shot below). 2. Right click the project and choose Add New Item. Add a new Interface and call it ‘IScheduledJob.cs’. Mark the Interface public and add the signature for Run. Your interface should look like below. namespace HelloWorldQuartzDotNet { public interface IScheduledJob { void Run(); } }   3. Right click the project and choose Add new Item. Add a class and call it ‘Scheduled Job’. Use this class to implement the interface ‘IscheduledJob.cs’. Look at the pseudo code in the implementation of the Run method. using System; namespace HelloWorldQuartzDotNet { class ScheduledJob : IScheduledJob { public void Run() { // Get an instance of the Quartz.Net scheduler // Define the Job to be scheduled // Associate a trigger with the Job // Assign the Job to the scheduler throw new NotImplementedException(); } } }   I’ll get into the implementation in more detail, but let’s look at the minimal configuration a sample configuration file for Quartz.Net service to work. Quartz.Net configuration In the App.Config file copy the below configuration <?xml version="1.0" encoding="utf-8" ?> <configuration> <configSections> <section name="quartz" type="System.Configuration.NameValueSectionHandler, System, Version=1.0.5000.0,Culture=neutral, PublicKeyToken=b77a5c561934e089" /> </configSections> <quartz> <add key="quartz.scheduler.instanceName" value="ServerScheduler" /> <add key="quartz.threadPool.type" value="Quartz.Simpl.SimpleThreadPool, Quartz" /> <add key="quartz.threadPool.threadCount" value="10" /> <add key="quartz.threadPool.threadPriority" value="2" /> <add key="quartz.jobStore.misfireThreshold" value="60000" /> <add key="quartz.jobStore.type" value="Quartz.Simpl.RAMJobStore, Quartz" /> </quartz> </configuration>   As you can see in the configuration above, I have included the instance name of the quartz scheduler, the thread pool type, count and priority, the job store type has been defined as RAM. You have the option of configuring that to ADO.NET JOB store. More details here. Writing & scheduling a hello world job with Quartz.Net Once fully implemented the ScheduleJob.cs class should look like below. I’ll walk you through the details of the implementation… - GetScheduler() uses the name of the quartz.net and listens on localhost port 555 to try and connect to the quartz.net windows service. - Run() an attempt is made to start the scheduler in case it is in standby mode - I have defined a job “WriteHelloToConsole” (that’s the name of the job), this job belongs to the group “IT”. Think of group as a logical grouping feature. It helps you bucket jobs into groups. Quartz.Net gives you the ability to pause or delete all jobs in a group (We’ll look at that in some of the future posts). I have requested for recovery of this job in case the quartz.net service fails over to the other node in the cluster. The jobType is “HelloWorldJob”. This is the class that would be called to execute the job. More details on this below… - I have defined a trigger for my job. I have called the trigger “WriteHelloToConsole”. The Trigger works on the cron schedule “0 0/1 * 1/1 * ? *” which means fire the job once every minute. I would recommend that you look at www.cronmaker.com a free and great website to build and parse cron expressions. The trigger has a priority 1. So, if two jobs are run at the same time, this trigger will have high priority and will be run first. - Use the Job and Trigger to schedule the job. This method returns a datetime offeset. It is possible to see the next fire time for the job from this variable. using System.Collections.Specialized; using System.Configuration; using Quartz; using System; using Quartz.Impl; namespace HelloWorldQuartzDotNet { class ScheduledJob : IScheduledJob { public void Run() { // Get an instance of the Quartz.Net scheduler var schd = GetScheduler(); // Start the scheduler if its in standby if (!schd.IsStarted) schd.Start(); // Define the Job to be scheduled var job = JobBuilder.Create<HelloWorldJob>() .WithIdentity("WriteHelloToConsole", "IT") .RequestRecovery() .Build(); // Associate a trigger with the Job var trigger = (ICronTrigger)TriggerBuilder.Create() .WithIdentity("WriteHelloToConsole", "IT") .WithCronSchedule("0 0/1 * 1/1 * ? *") // visit http://www.cronmaker.com/ Queues the job every minute .WithPriority(1) .Build(); // Assign the Job to the scheduler var schedule = schd.ScheduleJob(job, trigger); Console.WriteLine("Job '{0}' scheduled for '{1}'", "", schedule.ToString("r")); } // Get an instance of the Quartz.Net scheduler private static IScheduler GetScheduler() { try { var properties = new NameValueCollection(); properties["quartz.scheduler.instanceName"] = "ServerScheduler"; // set remoting expoter properties["quartz.scheduler.proxy"] = "true"; properties["quartz.scheduler.proxy.address"] = string.Format("tcp://{0}:{1}/{2}", "localhost", "555", "QuartzScheduler"); // Get a reference to the scheduler var sf = new StdSchedulerFactory(properties); return sf.GetScheduler(); } catch (Exception ex) { Console.WriteLine("Scheduler not available: '{0}'", ex.Message); throw; } } } }   The above highlighted values have been taken from the Quartz.config file, this file is available in the Quartz.net server installation directory. Implementation of my HelloWorldJob Class below. The HelloWorldJob class gets called to execute the job “WriteHelloToConsole” using the once every minute trigger set up for this job. The HelloWorldJob is a class that implements the interface IJob. I’ll walk you through the details of the implementation… - context is passed to the method execute by the quartz.net scheduler service. This has everything you need to pull out the job, trigger specific information. - for example. I have pulled out the value of the jobKey name, the fire time and next fire time. using Quartz; using System; namespace HelloWorldQuartzDotNet { class HelloWorldJob : IJob { public void Execute(IJobExecutionContext context) { try { Console.WriteLine("Job {0} fired @ {1} next scheduled for {2}", context.JobDetail.Key, context.FireTimeUtc.Value.ToString("r"), context.NextFireTimeUtc.Value.ToString("r")); Console.WriteLine("Hello World!"); } catch (Exception ex) { Console.WriteLine("Failed: {0}", ex.Message); } } } }   I’ll add a call to call the scheduler in the Main method in Program.cs using System; using System.Threading; namespace HelloWorldQuartzDotNet { class Program { static void Main(string[] args) { try { var sj = new ScheduledJob(); sj.Run(); Thread.Sleep(10000 * 10000); } catch (Exception ex) { Console.WriteLine("Failed: {0}", ex.Message); } } } }   This was third in the series of posts on enterprise scheduling using Quartz.net, in the next post I’ll be covering how to pass parameters to the scheduled task scheduled on Quartz.net windows service. Thank you for taking the time out and reading this blog post. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Stay tuned!

  Read the article

• How about a new platform for your next API&hellip; a CMS?

  - by Elton Stoneman

  Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2014/05/22/how-about-a-new-platform-for-your-next-apihellip-a.aspxSay what? I’m seeing a type of API emerge which serves static or long-lived resources, which are mostly read-only and have a controlled process to update the data that gets served. Think of something like an app configuration API, where you want a central location for changeable settings. You could use this server side to store database connection strings and keep all your instances in sync, or it could be used client side to push changes out to all users (and potentially driving A/B or MVT testing). That’s a good candidate for a RESTful API which makes proper use of HTTP expiration and validation caching to minimise traffic, but really you want a front end UI where you can edit the current config that the API returns and publish your changes. Sound like a Content Mangement System would be a good fit? I’ve been looking at that and it’s a great fit for this scenario. You get a lot of what you need out of the box, the amount of custom code you need to write is minimal, and you get a whole lot of extra stuff from using CMS which is very useful, but probably not something you’d build if you had to put together a quick UI over your API content (like a publish workflow, fine-grained security and an audit trail). You typically use a CMS for HTML resources, but it’s simple to expose JSON instead – or to do content negotiation to support both, so you can open a resource in a browser and see a nice visual representation, or request it with: Accept=application/json and get the same content rendered as JSON for the app to use. Enter Umbraco Umbraco is an open source .NET CMS that’s been around for a while. It has very good adoption, a lively community and a good release cycle. It’s easy to use, has all the functionality you need for a CMS-driven API, and it’s scalable (although you won’t necessarily put much scale on the CMS layer). In the rest of this post, I’ll build out a simple app config API using Umbraco. We’ll define the structure of the configuration resource by creating a new Document Type and setting custom properties; then we’ll build a very simple Razor template to return configuration documents as JSON; then create a resource and see how it looks. And we’ll look at how you could build this into a wider solution. If you want to try this for yourself, it’s ultra easy – there’s an Umbraco image in the Azure Website gallery, so all you need to to is create a new Website, select Umbraco from the image and complete the installation. It will create a SQL Azure website to store all the content, as well as a Website instance for editing and accessing content. They’re standard Azure resources, so you can scale them as you need. The default install creates a starter site for some HTML content, which you can use to learn your way around (or just delete). 1. Create Configuration Document Type In Umbraco you manage content by creating and modifying documents, and every document has a known type, defining what properties it holds. We’ll create a new Document Type to describe some basic config settings. In the Settings section from the left navigation (spanner icon), expand Document Types and Master, hit the ellipsis and select to create a new Document Type: This will base your new type off the Master type, which gives you some existing properties that we’ll use – like the Page Title which will be the resource URL. In the Generic Properties tab for the new Document Type, you set the properties you’ll be able to edit and return for the resource: Here I’ve added a text string where I’ll set a default cache lifespan, an image which I can use for a banner display, and a date which could show the user when the next release is due. This is the sort of thing that sits nicely in an app config API. It’s likely to change during the life of the product, but not very often, so it’s good to have a centralised place where you can make and publish changes easily and safely. It also enables A/B and MVT testing, as you can change the response each client gets based on your set logic, and their apps will behave differently without needing a release. 2. Define the response template Now we’ve defined the structure of the resource (as a document), in Umbraco we can define a C# Razor template to say how that resource gets rendered to the client. If you only want to provide JSON, it’s easy to render the content of the document by building each property in the response (Umbraco uses dynamic objects so you can specify document properties as object properties), or you can support content negotiation with very little effort. Here’s a template to render the document as HTML or JSON depending on the Accept header, using JSON.NET for the API rendering: @inherits Umbraco.Web.Mvc.UmbracoTemplatePage @using Newtonsoft.Json @{ Layout = null; } @if(UmbracoContext.HttpContext.Request.Headers["accept"] != null &amp;&amp; UmbracoContext.HttpContext.Request.Headers["accept"] == "application/json") { Response.ContentType = "application/json"; @Html.Raw(JsonConvert.SerializeObject(new { cacheLifespan = CurrentPage.cacheLifespan, bannerImageUrl = CurrentPage.bannerImage, nextReleaseDate = CurrentPage.nextReleaseDate })) } else { <h1>App configuration</h1> <p>Cache lifespan: <b>@CurrentPage.cacheLifespan</b></p> <p>Banner Image: </p> <img src="@CurrentPage.bannerImage"> <p>Next Release Date: <b>@CurrentPage.nextReleaseDate</b></p> } That’s a rough-and ready example of what you can do. You could make it completely generic and just render all the document’s properties as JSON, but having a specific template for each resource gives you control over what gets sent out. And the templates are evaluated at run-time, so if you need to change the output – or extend it, say to add caching response headers – you just edit the template and save, and the next client request gets rendered from the new template. No code to build and ship. 3. Create the content With your document type created, in  the Content pane you can create a new instance of that document, where Umbraco gives you a nice UI to input values for the properties we set up on the Document Type: Here I’ve set the cache lifespan to an xs:duration value, uploaded an image for the banner and specified a release date. Each property gets the appropriate input control – text box, file upload and date picker. At the top of the page is the name of the resource – myapp in this example. That specifies the URL for the resource, so if I had a DNS entry pointing to my Umbraco instance, I could access the config with a URL like http://static.x.y.z.com/config/myapp. The setup is all done now, so when we publish this resource it’ll be available to access.  4. Access the resource Now if you open  that URL in the browser, you’ll see the HTML version rendered: - complete with the  image and formatted date. Umbraco lets you save changes and preview them before publishing, so the HTML view could be a good way of showing editors their changes in a usable view, before they confirm them. If you browse the same URL from a REST client, specifying the Accept=application/json request header, you get this response:   That’s the exact same resource, with a managed UI to publish it, being accessed as HTML or JSON with a tiny amount of effort. 5. The wider landscape If you have fairy stable content to expose as an API, I think  this approach is really worth considering. Umbraco scales very nicely, but in a typical solution you probably wouldn’t need it to. When you have additional requirements, like logging API access requests - but doing it out-of-band so clients aren’t impacted, you can put a very thin API layer on top of Umbraco, and cache the CMS responses in your API layer:   Here the API does a passthrough to CMS, so the CMS still controls the content, but it caches the response. If the response is cached for 1 minute, then Umbraco only needs to handle 1 request per minute (multiplied by the number of API instances), so if you need to support 1000s of request per second, you’re scaling a thin, simple API layer rather than having to scale the more complex CMS infrastructure (including the database). This diagram also shows an approach to logging, by asynchronously publishing a message to a queue (Redis in this case), which can be picked up later and persisted by a different process. Does it work? Beautifully. Using Azure, I spiked the solution above (including the Redis logging framework which I’ll blog about later) in half a day. That included setting up different roles in Umbraco to demonstrate a managed workflow for publishing changes, and a couple of document types representing different resources. Is it maintainable? We have three moving parts, which are all managed resources in Azure –  an Azure Website for Umbraco which may need a couple of instances for HA (or may not, depending on how long the content can be cached), a message queue (Redis is in preview in Azure, but you can easily use Service Bus Queues if performance is less of a concern), and the Web Role for the API. Two of the components are off-the-shelf, from open source projects, and the only custom code is the API which is very simple. Does it scale? Pretty nicely. With a single Umbraco instance running as an Azure Website, and with 4x instances for my API layer (Standard sized Web Roles), I got just under 4,000 requests per second served reliably, with a Worker Role in the background saving the access logs. So we had a nice UI to publish app config changes, with a friendly Web preview and a publishing workflow, capable of supporting 14 million requests in an hour, with less than a day’s effort. Worth considering if you’re publishing long-lived resources through your API.

  Read the article

• Building and Deploying Windows Azure Web Sites using Git and GitHub for Windows

  - by shiju

  Microsoft Windows Azure team has released a new version of Windows Azure which is providing many excellent features. The new Windows Azure provides Web Sites which allows you to deploy up to 10 web sites  for free in a multitenant shared environment and you can easily upgrade this web site to a private, dedicated virtual server when the traffic is grows. The Meet Windows Azure Fact Sheet provides the following information about a Windows Azure Web Site: Windows Azure Web Sites enable developers to easily build and deploy websites with support for multiple frameworks and popular open source applications, including ASP.NET, PHP and Node.js. With just a few clicks, developers can take advantage of Windows Azure’s global scale without having to worry about operations, servers or infrastructure. It is easy to deploy existing sites, if they run on Internet Information Services (IIS) 7, or to build new sites, with a free offer of 10 websites upon signup, with the ability to scale up as needed with reserved instances. Windows Azure Web Sites includes support for the following: Multiple frameworks including ASP.NET, PHP and Node.js Popular open source software apps including WordPress, Joomla!, Drupal, Umbraco and DotNetNuke Windows Azure SQL Database and MySQL databases Multiple types of developer tools and protocols including Visual Studio, Git, FTP, Visual Studio Team Foundation Services and Microsoft WebMatrix Signup to Windows and Enable Azure Web Sites You can signup for a 90 days free trial account in Windows Azure from here. After creating an account in Windows Azure, go to https://account.windowsazure.com/ , and select to preview features to view the available previews. In the Web Sites section of the preview features, click “try it now” which will enables the web sites feature Create Web Site in Windows Azure To create a web sites, login to the Windows Azure portal, and select Web Sites from and click New icon from the left corner  Click WEB SITE, QUICK CREATE and put values for URL and REGION dropdown. You can see the all web sites from the dashboard of the Windows Azure portal Set up Git Publishing Select your web site from the dashboard, and select Set up Git publishing To enable Git publishing , you must give user name and password which will initialize a Git repository Clone Git Repository We can use GitHub for Windows to publish apps to non-GitHub repositories which is well explained by Phil Haack on his blog post. Here we are going to deploy the web site using GitHub for Windows. Let’s clone a Git repository using the Git Url which will be getting from the Windows Azure portal. Let’s copy the Git url and execute the “git clone” with the git url. You can use the Git Shell provided by GitHub for Windows. To get it, right on the GitHub for Windows, and select open shell here as shown in the below picture. When executing the Git Clone command, it will ask for a password where you have to give password which specified in the Windows Azure portal. After cloning the GIT repository, you can drag and drop the local Git repository folder to GitHub for Windows GUI. This will automatically add the Windows Azure Web Site repository onto GitHub for Windows where you can commit your changes and publish your web sites to Windows Azure. Publish the Web Site using GitHub for Windows We can add multiple framework level files including ASP.NET, PHP and Node.js, to the local repository folder can easily publish to Windows Azure from GitHub for Windows GUI. For this demo, let me just add a simple Node.js file named Server.js which handles few request handlers. 1: var http = require('http'); 2: var port=process.env.PORT; 3: var querystring = require('querystring'); 4: var utils = require('util'); 5: var url = require("url"); 6:   7: var server = http.createServer(function(req, res) { 8: switch (req.url) { //checking the request url 9: case '/': 10: homePageHandler (req, res); //handler for home page 11: break; 12: case '/register': 13: registerFormHandler (req, res);//hamdler for register 14: break; 15: default: 16: nofoundHandler (req, res);// handler for 404 not found 17: break; 18: } 19: }); 20: server.listen(port); 21: //function to display the html form 22: function homePageHandler (req, res) { 23: console.log('Request handler home was called.'); 24: res.writeHead(200, {'Content-Type': 'text/html'}); 25: var body = '<html>'+ 26: '<head>'+ 27: '<meta http-equiv="Content-Type" content="text/html; '+ 28: 'charset=UTF-8" />'+ 29: '</head>'+ 30: '<body>'+ 31: '<form action="/register" method="post">'+ 32: 'Name:<input type=text value="" name="name" size=15></br>'+ 33: 'Email:<input type=text value="" name="email" size=15></br>'+ 34: '<input type="submit" value="Submit" />'+ 35: '</form>'+ 36: '</body>'+ 37: '</html>'; 38: //response content 39: res.end(body); 40: } 41: //handler for Post request 42: function registerFormHandler (req, res) { 43: console.log('Request handler register was called.'); 44: var pathname = url.parse(req.url).pathname; 45: console.log("Request for " + pathname + " received."); 46: var postData = ""; 47: req.on('data', function(chunk) { 48: // append the current chunk of data to the postData variable 49: postData += chunk.toString(); 50: }); 51: req.on('end', function() { 52: // doing something with the posted data 53: res.writeHead(200, "OK", {'Content-Type': 'text/html'}); 54: // parse the posted data 55: var decodedBody = querystring.parse(postData); 56: // output the decoded data to the HTTP response 57: res.write('<html><head><title>Post data</title></head><body><pre>'); 58: res.write(utils.inspect(decodedBody)); 59: res.write('</pre></body></html>'); 60: res.end(); 61: }); 62: } 63: //Error handler for 404 no found 64: function nofoundHandler(req, res) { 65: console.log('Request handler nofound was called.'); 66: res.writeHead(404, {'Content-Type': 'text/plain'}); 67: res.end('404 Error - Request handler not found'); 68: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } If there is any change in the local repository folder, GitHub for Windows will automatically detect the changes. In the above step, we have just added a Server.js file so that GitHub for Windows will detect the changes. Let’s commit the changes to the local repository before publishing the web site to Windows Azure. After committed the all changes, you can click publish button which will publish the all changes to Windows Azure repository. The following screen shot shows deployment history from the Windows Azure portal.   GitHub for Windows is providing a sync button which can use for synchronizing between local repository and Windows Azure repository after making any commit on the local repository after any changes. Our web site is running after the deployment using Git Summary Windows Azure Web Sites lets the developers to easily build and deploy websites with support for multiple framework including ASP.NET, PHP and Node.js and can easily deploy the Web Sites using Visual Studio, Git, FTP, Visual Studio Team Foundation Services and Microsoft WebMatrix. In this demo, we have deployed a Node.js Web Site to Windows Azure using Git. We can use GitHub for Windows to publish apps to non-GitHub repositories and can use to publish Web SItes to Windows Azure.

  Read the article

• CodePlex Daily Summary for Monday, March 15, 2010

  CodePlex Daily Summary for Monday, March 15, 2010New ProjectsAT Accounts: AT Accounts helps developers to intergrate accounting functionality in their applications. It has both the WPF userinterface and SilverlightChild page list(for dnn4/5): A free module which can display sub pages list for a selected tab. It is template based and support options like Recursive/Child tab prefix/link...dashCommerce: dashCommerce is the leading ASP.NET e-commerce platform.Fire Utilities: My Development Utiltites and base classes: New Zealand Bank Account ValidatorFlyCatch (Bugtracking System): A simple webbased Bugtracking System.fracback: Fractal feedback concepts, based on video feedbackftc3650: code for ftc 3650Google AJAX Search Services for jQuery: This plug-in encapsulates part of the Google AJAX Search API to streamline the process of Google Search integration.Little Black Book DB: This is the Database for the following Projects: SQL Azure PHP Connection SQL Azure Ruby Connection SQL Azure Python Connection SQL Azure .NE...MediaCommMVC: MediaCommMVC is a community platform focusing on photos, videos and discussions. It's based on ASP.NET MVC and uses (fluent) nhibernate, jquery an...Miracle OS: The Miracle OS is an OS from Fox. We work on it, but it isn't ready. Do you want help us? Please send a mail to victor@fox.fi.stMultiwfn: (1)Plotting various graph(filled color/contour/relief map...) (2)Generate Cube file (3)Manipulate & analyze wavefunction Supportting lots of proper...MySpace DataRelay: Data Relay is the foundation of MySpace's middle tier. At its heart, it is a messaging system for relaying information both between clients and ser...NinjaCMS: Ninja CMS is an asp.net based content management system which provides a designer friendly, developer friendly interface to work with. It's flexibl...open gaze and mouse analyzer: Ogama allows recording and analyzing eye- and mouse-tracking data from slideshow eyetracking experiments in parallel. It´s developed in C#.NET and ...Özkasoft.Net | E-Commerce: Özkasoft's E-Commerce ProjectProfiCV: Profi CVpyTarget: Implement a powerful iscsi target in python, and easily use under most popular systems. It also includes the following features: multi-target, mult...SharePoint Platform Extensions: SharePoint Platform Extensions by Espora. Sorting Algorithm Visualization: Sorting Algorithm Visualization Displays Bead Sort, Binary Tree Sort, Bubble Sort, Bucket Sort, Cocktail Sort, Counting Sort, Gnome Sort, In Place ...Specify: A framework for creating executable specifications in .NET. Spell Corrector: A spell corrector that uses Bayes algorithm and BK (Burkhard-Keller) tree.SQL Azure Ruby Connection: This is a demo to show how to connect to SQL Azure with Ruby on Rails.uManage - AD Self-Service Portal: uManage is an Active Directory Self-Service Portal as well as Help Desk web application designed for use on intranet systems. It allows users to u...Winforms Rounded Group Box Control: Rounded Group Box - A Grouping control with Rounded Corners, Gradients, and Drop ShadowWizard Engine: Host application agnostic wizard engine platform, that allows you to fluently define complex conditional flows and provides means for execution of ...WS-Transfer based File Upload: WS-Transer based upload of large files in multiple partsXAMLStylePad: XAMLStylePad - is a simple in use styles and templates XAML-editor. It designed for comfortable coding in XAML with real-time preview result on aut...Your Twitt Engine: Ovo je aplikacija za sve ljude koji su na svom radnom mjestu pod prismotrom poslodavca ili sefa, koji kontroliraju njihov monitor. Tako uz ovu apl...New ReleasesAmiBroker Plug-ins with C#. A non official AmiBroker Plug-in SDK: AniBroker Plug-in SDK v0.0.5: Removed dependency on .NET 4.0, now it works fine with .NET 2.0BeerMath.net: 0.1: Version 0.1Initial set of calculations supported: IBUs Color ABV/ABWChild page list(for dnn4/5): Child Page List 2.6: Source code is also include in module package.dashCommerce: dashCommerce Releases: You can download both Source and WebReady packages at http://www.dashcommerce.org. If you wish to submit patches, then use the Source Code tab her...ExcelDna: ExcelDna Version 0.23: ExcelDna Version 0.23 2010/03/14 - Packing and other features This release adds a number of features to ExcelDna: Add ExplicitExports attribute to ...Family Tree Analyzer: Version 1.0.7.1: Version 1.0.7.0 Update Census form to show family totals Fix England and Wales Lost Cousins reports to be England OR Wales Problems with Gedcom in...Foursquare BlogEngine Widget: foursquare widget for BlogEngine.NET Version 0.2: To see the changes which have been made, visit http://philippkueng.ch/post/Foursquare-BlogEngineNET-Widget-Version-02.aspx For installation instruc...GLB Virtual Player Builder: 0.4.0 Official Archetypes Release: Updated for new archetypes. The builder still includes the old player formats, and you can still import your old players' builds. Please PM me an...Home Access Plus+: v3.1.4.0: Version 3.1.3.1 Release Change Log: Added Breadcrumbs to My Computer File Changes: ~/bin/CHS Extranet.dll ~/bin/CHS Extranet.pdb ~/images/arro...Little Black Book DB: Little Black Book R1: This is the first release of the Little black book presentation I presented at Confoo. I decided to package the Database along with the Windows Az...mite.net - .NET API for mite: Version 1.2.1: Added Support for budget type Modified TimerMapper to return timers Fixed Encoding issue in xml conversionMultiwfn: multiwfn1.0: multiwfn1.0Multiwfn: multiwfn1.0_source: multiwfn1.0_sourceMultiwfn: multiwfn1.1: multiwfn1.1Multiwfn: multiwfn1.1_source: multiwfn1.1_sourceMultiwfn: multiwfn1.2: 1.2 2010-FEB-9 *加入了对10f型轨道的支持。 *新支持非限制性Post-HF波函数用以计算自旋密度。 *新增加直接读入高斯03/09的fch文件的支持，可以观看NBO轨道，详见readme实例4.10。 *绘制平面图时允许通过输入三个点坐标定义平面，允许自定义平面的原点与平移向...Multiwfn: multiwfn1.2_source: Include all the file that needed by compilation in CVF6.5PowerShell Community Extensions: 2.0 Beta 2: Release NotesThis is a pretty close to final release. We have eliminated all of the names that ran afound of the module loading mechanism which me...pyTarget: pyTarget.binary-for-windows-x86.rar: pyTarget.binary-for-windows-x86.rarpyTarget: pyTarget.src.tar.bz2: pyTarget.src.tar.bz2RedBulb for XNA Framework: RedBulbConsole (Console, Menu and TrackHUD Sample): http://bayimg.com/image/jalhmaacd.jpgScrum Sprint Monitor: 1.0.0.45262 (.NET 4.0 RC): Tested against TFS 2010 RC. For the .NET 3.5 SP1 platform, use the .NET 3.5 SP1 download. What is new in this release? Major performance increase ...sELedit: sELedit v1.1: Removed: Clone and Delete Button Added: Context Menu to Item List Added: Clone and Delete button to Context Menu Added: Export / Import Item ...Sorting Algorithm Visualization: Beta 1: Sorting Algorithm VisualizationSpecify: Version 1.0: Version 1.0Spell Corrector: Spell Corrector 0.1: A basic version that supports basic functionality.Spell Corrector: Spell Corrector 0.1 Source Code: Source code of version 0.1Spiral Architecture Driven Development (SADD): SADD v.0.9: Pre-final release with the NEW materials now all in English ! The Final release is coming soon. After guest column for SADD publication in MS Ar...Spiral Architecture Driven Development (SADD) for Russian: SADD v.0.9: Pre-final release with the NEW materials now all in English ! The Final release is coming soon. After guest column for SADD publication in MS Ar...SQL Azure Ruby Connection: Little Black Book Ruby R1: This is the Ruby Demo that I demostrated at Confoo. Special Thanks to Tony Thompson for putting this demo together. To check out Tony's Portfolio ...The Scrum Factory: The Scrum Factory Server - V1a: This is the newest version of the server. Some minor bugs from version v1 were fixed, and some slighted changed were made some database views.twNowplaying: twNowplaying 1.0.0.4: Please note that the user has to press the Twitter logo to log in the first time the application is started.uManage - AD Self-Service Portal: uManage - v1.0 (.NET 4.0 RC): Initial Release of uManage. NOTE: Designed for ASP.NET and .NET 4.0 RC ONLY! This is the initial release of uManage and covers the first phase of ...Virtu: Virtu 0.8: Source Requirements.NET Framework 3.5 with Service Pack 1 Visual Studio 2008 with Service Pack 1, or Visual C# 2008 Express Edition with Service Pa...Visual Studio DSite: Speech Synthesizer (Text to Speech) in Visual C++: A very simple text to speech program written in visual c 2008.White Tiger: 0.0.4.0: *now you can disable the file security checks *winforms aplications created to manage tablesWinforms Rounded Group Box Control: Release 1.0: To use this control simply add the class to your project and compile it. It will then show up in the projects components section in the toolbox. ...WS-Transfer based File Upload: 0.5: Implements the binary file transfer mechanism onlyXsltDb - DotNetNuke XSLT module: 01.00.89: Super modules configuration names. 16767 - Fixed more bug fixes...Yakiimo3D: DirectX11 Rheinhard Tonemapping Source and Binary: DirectX11 Rheinhard tonemapping source and binary.Your Twitt Engine: test: Slobodno probajte sa vasim twitter korisničkim računomMost Popular ProjectsMetaSharpWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitASP.NET Ajax LibraryWindows Presentation Foundation (WPF)ASP.NETLiveUpload to FacebookMost Active ProjectsLINQ to TwitterRawrN2 CMSBlogEngine.NETpatterns & practices – Enterprise LibrarySharePoint Team-MailerjQuery Library for SharePoint Web ServicesCaliburn: An Application Framework for WPF and SilverlightFarseer Physics EngineCalcium: A modular application toolset leveraging Prism

  Read the article

• Internationalize WebCenter Portal - Content Presenter

  - by Stefan Krantz

  Lately we have been involved in engagements where internationalization has been holding the project back from success. In this post we are going to explain how to get Content Presenter and its editorials to comply with the current selected locale for the WebCenter Portal session. As you probably know by now WebCenter Portal leverages the Localization support from Java Server Faces (JSF), in this post we will assume that the localization is controlled and enforced by switching the current browsers locale between English and Spanish. There is two main scenarios in internationalization of a content enabled pages, since Content Presenter offers both presentation of information as well as contribution of information, in this post we will look at how to enable seamless integration of correct localized version of the back end content file and how to enable the editor/author to edit the correct localized version of the file based on the current browser locale. Solution Scenario 1 - Localization aware content presentation Due to the amount of steps required to implement the enclosed solution proposal I have decided to share the solution with you in group components for each facet of the solution. If you want to get more details on each step, you can review the enclosed components. This post will guide you through the steps of enabling each component and what it enables/changes in each section of the system. Enable Content Presenter Customization By leveraging a predictable naming convention of the data files used to hold the content for the Content Presenter instance we can easily develop a component that will dynamically switch the name out before presenting the information. The naming convention we have leverage is the industry best practice by having a shared identifier as prefix (ContentABC) and a language enabled suffix (_EN) (_ES). So the assumption is that each file pair in above example should look like following:- English version - (ContentABC_EN)- Spanish version - (ContentABC_ES) Based on above theory we can now easily regardless of the primary version assigned to the content presenter instance switch the language out by using the localization support from JSF. Below java bean (oracle.webcenter.doclib.internal.view.presenter.NLSHelperBean) is enclosed in the customization project available for download at the bottom of the post: 1: public static final String CP_D_DOCNAME_FORMAT = "%s_%s"; 2: public static final int CP_UNIQUE_ID_INDEX = 0; 3: private ContentPresenter presenter = null; 4:   5:   6: public NLSHelperBean() { 7: super(); 8: } 9:   10: /** 11: * This method updates the configuration for the pageFlowScope to have the correct datafile 12: * for the current Locale 13: */ 14: public void initLocaleForDataFile() { 15: String dataFile = null; 16: // Checking that state of presenter is present, also make sure the item is eligible for localization by locating the "_" in the name 17: if(presenter.getConfiguration().getDatasource() != null && 18: presenter.getConfiguration().getDatasource().isNodeDatasource() && 19: presenter.getConfiguration().getDatasource().getNodeIdDatasource() != null && 20: !presenter.getConfiguration().getDatasource().getNodeIdDatasource().equals("") && 21: presenter.getConfiguration().getDatasource().getNodeIdDatasource().indexOf("_") > 0) { 22: dataFile = presenter.getConfiguration().getDatasource().getNodeIdDatasource(); 23: FacesContext fc = FacesContext.getCurrentInstance(); 24: //Leveraging the current faces contenxt to get current localization language 25: String currentLocale = fc.getViewRoot().getLocale().getLanguage().toUpperCase(); 26: String newDataFile = dataFile; 27: String [] uniqueIdArr = dataFile.split("_"); 28: if(uniqueIdArr.length > 0) { 29: newDataFile = String.format(CP_D_DOCNAME_FORMAT, uniqueIdArr[CP_UNIQUE_ID_INDEX], currentLocale); 30: } 31: //Replacing the current Node datasource with localized datafile. 32: presenter.getConfiguration().getDatasource().setNodeIdDatasource(newDataFile); 33: } 34: } With this bean code available to our WebCenter Portal implementation we can start the next step, by overriding the standard behavior in content presenter by applying a MDS Taskflow customization to the content presenter taskflow, following taskflow customization has been applied to the customization project attached to this post:- Library: WebCenter Document Library Service View- Path: oracle.webcenter.doclib.view.jsf.taskflows.presenter- File: contentPresenter.xml Changes made in above customization view:1. A new method invocation activity has been added (initLocaleForDataFile)2. The method invocation invokes the new NLSHelperBean3. The default activity is moved to the new Method invocation (initLocaleForDataFile)4. The outcome from the method invocation goes to determine-navigation (original default activity) The above changes concludes the presentation modification to support a compatible localization scenario for a content driven page. In addition this customization do not limit or disables the out of the box capabilities of WebCenter Portal. Steps to enable above customization Start JDeveloper and open your WebCenter Portal Application Select "Open Project" and include the extracted project you downloaded (CPNLSCustomizations.zip) Make sure the build out put from CPNLSCustomizations project is a dependency to your Portal project Deploy your Portal Application to your WC_CustomPortal managed server Make sure your naming convention of the two data files follow above recommendation Example result of the solution: Solution Scenario 2 - Localization aware content creation and authoring As you could see from Solution Scenario 1 we require the naming convention to be strictly followed, this means in the hands of a user with limited technology knowledge this can be one of the failing links in this solutions. Therefore I strongly recommend that you also follow this part since this will eliminate this risk and also increase the editors/authors usability with a magnitude. The current WebCenter Portal Architecture leverages WebCenter Content today to maintain, publish and manage content, therefore we need to make few efforts in making sure this part of the architecture is on board with our new naming practice and also simplifies the creation of content for our end users. As you probably remember the naming convention required a prefix to be common so I propose we enable a new component that help you auto name the content items dDocName (this means that the readable title can still be in a human readable format). The new component (WCP-LocalizationSupport.zip) built for this scenario will enable a couple of things: 1. A new service where a sequential number can be generate on request - service name: GET_WCP_LOCALE_CONTENTID 2. The content presenter is leveraging a specific function when launching the content creation wizard from within Content Presenter. Assumption is that users will create the content by clicking "Create Web Content" button. When clicking the button the wizard opened is actually running in side of WebCenter Content server, file executed (contentwizard.hcsp). This file uses JSON commands that will generate operations in the content server, I have extend this file to create two identical data files instead of one.- First it creates the English version by leveraging the new Service and a Global Rule to set the dDocName on the original check in screen, this global rule is available in a configuration package attached to this blog (NLSContentProfileRule.zip)- Secondly we run a set of JSON javascripts to create the Spanish version with the same details except for the name where we replace the suffix with (_ES)- Then content creation wizard ends with its out of the box behavior and assigns the Content Presenter instance the English versionSee Javascript markup below - this can be changed in the (WCP-LocalizationSupport.zip/component/WCP-LocalizationSupport/publish/webcenter) 1: //---------------------------------------A-TEAM--------------------------------------- 2: WCM.ContentWizard.CheckinContentPage.OnCheckinComplete = function(returnParams) 3: { 4: var callback = WCM.ContentWizard.CheckinContentPage.checkinCompleteCallback; 5: WCM.ContentWizard.ChooseContentPage.OnSelectionComplete(returnParams, callback); 6: // Load latest DOC_INFO_SIMPLE 7: var cgiPath = DOCLIB.config.httpCgiPath; 8: var jsonBinder = new WCM.Idc.JSONBinder(); 9: jsonBinder.SetLocalDataValue('IdcService', 'DOC_INFO_SIMPLE'); 10: jsonBinder.SetLocalDataValue('dID', returnParams.dID); 11: jsonBinder.Send(cgiPath, $CB(this, function(http) { 12: var ret = http.GetResponseText(); 13: var binder = new WCM.Idc.JSONBinder(ret); 14: var dDocName = binder.GetResultSetValue('DOC_INFO', 'dDocName', 0); 15: if(dDocName.indexOf("_") > 0){ 16: var ssBinder = new WCM.Idc.JSONBinder(); 17: ssBinder.SetLocalDataValue('IdcService', 'SS_CHECKIN_NEW'); 18: //Additional Localization dDocName generated 19: ssBinder.SetLocalDataValue('dDocName', getLocalizedDocName(dDocName, "es")); 20: ssBinder.SetLocalDataValue('primaryFile', 'default.xml'); 21: ssBinder.SetLocalDataValue('ssDefaultDocumentToken', 'SSContributorDataFile'); 22:   23: for(var n = 0 ; n < binder.GetResultSetFields('DOC_INFO').length ; n++) { 24: var field = binder.GetResultSetFields('DOC_INFO')[n]; 25: if(field != 'dID' && 26: field != 'dDocName' && 27: field != 'dID' && 28: field != 'dReleaseState' && 29: field != 'dRevClassID' && 30: field != 'dRevisionID' && 31: field != 'dRevLabel') { 32: ssBinder.SetLocalDataValue(field, binder.GetResultSetValue('DOC_INFO', field, 0)); 33: } 34: } 35: ssBinder.Send(cgiPath, $CB(this, function(http) {})); 36: } 37: })); 38: } 39:   40: //Support function to create localized dDocNames 41: function getLocalizedDocName(dDocName, lang) { 42: var result = dDocName.replace("_EN", ("_" + lang)); 43: return result; 44: } 45: //---------------------------------------A-TEAM--------------------------------------- 3. By applying the enclosed NLSContentProfileRule.zip, the check in screen for DataFile creation will have auto naming enabled with localization suffix (default is English)You can change the default language by updating the GlobalNlsRule and assign preferred prefix.See Rule markup for dDocName field below: <$executeService("GET_WCP_LOCALE_CONTENTID")$><$dprDefaultValue=WCP_LOCALE.LocaleContentId & "_EN"$> Steps to enable above extensions and configurations Install WebCenter Component (WCP-LocalizationSupport.zip), via the AdminServer in WebCenter Content Administration menus Enable the component and restart the content server Apply the configuration bundle to enable the new Global Rule (GlobalNlsRule), via the WebCenter Content Administration/Config Migration Admin New Content Creation Experience Result Content EditingContent editing will by default be enabled for authoring in the current select locale since the content file is selected by (Solution Scenario 1), this means that a user can switch his browser locale and then get the editing experience adaptable to the current selected locale. NotesA-Team are planning to post a solution on how to inline switch the locale of the WebCenter Portal Session, so the Content Presenter, Navigation Model and other Face related features are localized accordingly. Content Presenter examples used in this post is an extension to following post:https://blogs.oracle.com/ATEAM_WEBCENTER/entry/enable_content_editing_of_iterative Downloads CPNLSCustomizations.zip - WebCenter Portal, Content Presenter Customization https://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/CPNLSCustomizations.zip WCP-LocalizationSupport.zip - WebCenter Content, Extension Component to enable localization creation of files with compliant auto naminghttps://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/WCP-LocalizationSupport.zip NLSContentProfileRule.zip - WebCenter Content, Configuration Update Bundle to enable Global rule for new check in naming of data fileshttps://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/NLSContentProfileRule.zip

  Read the article

• ASP.NET MVC Postbacks and HtmlHelper Controls ignoring Model Changes

  - by Rick Strahl

  So here's a binding behavior in ASP.NET MVC that I didn't really get until today: HtmlHelpers controls (like .TextBoxFor() etc.) don't bind to model values on Postback, but rather get their value directly out of the POST buffer from ModelState. Effectively it looks like you can't change the display value of a control via model value updates on a Postback operation. To demonstrate here's an example. I have a small section in a document where I display an editable email address: This is what the form displays on a GET operation and as expected I get the email value displayed in both the textbox and plain value display below, which reflects the value in the mode. I added a plain text value to demonstrate the model value compared to what's rendered in the textbox. The relevant markup is the email address which needs to be manipulated via the model in the Controller code. Here's the Razor markup: <div class="fieldcontainer"> <label> Email: &nbsp; <small>(username and <a href="http://gravatar.com">Gravatar</a> image)</small> </label> <div> @Html.TextBoxFor( mod=> mod.User.Email, new {type="email",@class="inputfield"}) @Model.User.Email </div> </div>   So, I have this form and the user can change their email address. On postback the Post controller code then asks the business layer whether the change is allowed. If it's not I want to reset the email address back to the old value which exists in the database and was previously store. The obvious thing to do would be to modify the model. Here's the Controller logic block that deals with that:// did user change email? if (!string.IsNullOrEmpty(oldEmail) && user.Email != oldEmail) { if (userBus.DoesEmailExist(user.Email)) { userBus.ValidationErrors.Add("New email address exists already. Please…"); user.Email = oldEmail; } else // allow email change but require verification by forcing a login user.IsVerified = false; }… model.user = user; return View(model); The logic is straight forward - if the new email address is not valid because it already exists I don't want to display the new email address the user entered, but rather the old one. To do this I change the value on the model which effectively does this:model.user.Email = oldEmail; return View(model); So when I press the Save button after entering in my new email address ([email protected]) here's what comes back in the rendered view: Notice that the textbox value and the raw displayed model value are different. The TextBox displays the POST value, the raw value displays the actual model value which are different. This means that MVC renders the textbox value from the POST data rather than from the view data when an Http POST is active. Now I don't know about you but this is not the behavior I expected - initially. This behavior effectively means that I cannot modify the contents of the textbox from the Controller code if using HtmlHelpers for binding. Updating the model for display purposes in a POST has in effect - no effect. (Apr. 25, 2012 - edited the post heavily based on comments and more experimentation) What should the behavior be? After getting quite a few comments on this post I quickly realized that the behavior I described above is actually the behavior you'd want in 99% of the binding scenarios. You do want to get the POST values back into your input controls at all times, so that the data displayed on a form for the user matches what they typed. So if an error occurs, the error doesn't mysteriously disappear getting replaced either with a default value or some value that you changed on the model on your own. Makes sense. Still it is a little non-obvious because the way you create the UI elements with MVC, it certainly looks like your are binding to the model value:@Html.TextBoxFor( mod=> mod.User.Email, new {type="email",@class="inputfield",required="required" }) and so unless one understands a little bit about how the model binder works this is easy to trip up. At least it was for me. Even though I'm telling the control which model value to bind to, that model value is only used initially on GET operations. After that ModelState/POST values provide the display value. Workarounds The default behavior should be fine for 99% of binding scenarios. But if you do need fix up values based on your model rather than the default POST values, there are a number of ways that you can work around this. Initially when I ran into this, I couldn't figure out how to set the value using code and so the simplest solution to me was simply to not use the MVC Html Helper for the specific control and explicitly bind the model via HTML markup and @Razor expression: <input type="text" name="User.Email" id="User_Email" value="@Model.User.Email" /> And this produces the right result. This is easy enough to create, but feels a little out of place when using the @Html helpers for everything else. As you can see by the difference in the name and id values, you also are forced to remember the naming conventions that MVC imposes in order for ModelBinding to work properly which is a pain to remember and set manually (name is the same as the property with . syntax, id replaces dots with underlines). Use the ModelState Some of my original confusion came because I didn't understand how the model binder works. The model binder basically maintains ModelState on a postback, which holds a value and binding errors for each of the Post back value submitted on the page that can be mapped to the model. In other words there's one ModelState entry for each bound property of the model. Each ModelState entry contains a value property that holds AttemptedValue and RawValue properties. The AttemptedValue is essentially the POST value retrieved from the form. The RawValue is the value that the model holds. When MVC binds controls like @Html.TextBoxFor() or @Html.TextBox(), it always binds values on a GET operation. On a POST operation however, it'll always used the AttemptedValue to display the control. MVC binds using the ModelState on a POST operation, not the model's value. So, if you want the behavior that I was expecting originally you can actually get it by clearing the ModelState in the controller code:ModelState.Clear(); This clears out all the captured ModelState values, and effectively binds to the model. Note this will produce very similar results - in fact if there are no binding errors you see exactly the same behavior as if binding from ModelState, because the model has been updated from the ModelState already and binding to the updated values most likely produces the same values you would get with POST back values. The big difference though is that any values that couldn't bind - like say putting a string into a numeric field - will now not display back the value the user typed, but the default field value or whatever you changed the model value to. This is the behavior I was actually expecting previously. But - clearing out all values might be a bit heavy handed. You might want to fix up one or two values in a model but rarely would you want the entire model to update from the model. So, you can also clear out individual values on an as needed basis:if (userBus.DoesEmailExist(user.Email)) { userBus.ValidationErrors.Add("New email address exists already. Please…"); user.Email = oldEmail; ModelState.Remove("User.Email"); } This allows you to remove a single value from the ModelState and effectively allows you to replace that value for display from the model. Why? While researching this I came across a post from Microsoft's Brad Wilson who describes the default binding behavior best in a forum post: The reason we use the posted value for editors rather than the model value is that the model may not be able to contain the value that the user typed. Imagine in your "int" editor the user had typed "dog". You want to display an error message which says "dog is not valid", and leave "dog" in the editor field. However, your model is an int: there's no way it can store "dog". So we keep the old value. If you don't want the old values in the editor, clear out the Model State. That's where the old value is stored and pulled from the HTML helpers. There you have it. It's not the most intuitive behavior, but in hindsight this behavior does make some sense even if at first glance it looks like you should be able to update values from the model. The solution of clearing ModelState works and is a reasonable one but you have to know about some of the innards of ModelState and how it actually works to figure that out.© Rick Strahl, West Wind Technologies, 2005-2012Posted in ASP.NET  MVC   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Windows Azure Root CAs and SSL Client Certificates

  - by Your DisplayName here!

  I ran into some problems while trying to make SSL client certificates work for StarterSTS 1.5. In theory you have to do two things (via startup tasks): Unlock the SSL section in IIS Install all the root certificates for the client certs you want to accept I did that. But it still does not work. While inspecting the event log, I stumbled over an schannel error message that I’ve never seen before: “When asking for client authentication, this server sends a list of trusted certificate authorities to the client. The client uses this list to choose a client certificate that is trusted by the server. Currently, this server trusts so many certificate authorities that the list has grown too long. This list has thus been truncated. The administrator of this machine should review the certificate authorities trusted for client authentication and remove those that do not really need to be trusted.” WTF? And indeed standard Azure (web role) VMs trust 275 root CAs (see attached list). Including kinda obscure ones. I don’t really know why MS made this design decision. It seems just wrong (including breaking the SSL client cert functionality). Deleting like 60% of them made SSL client certs from my CA work. So I guess I now have to find an automated way to attach CTLs to my site…joy. Exported list of trusted CA (as of 30th Dec 2010) AC Raíz Certicámara S.A. (4/2/2030 9:42:02 PM) AC RAIZ FNMT-RCM (1/1/2030 12:00:00 AM) A-CERT ADVANCED (10/23/2011 2:14:14 PM) Actalis Authentication CA G1 (6/25/2022 2:06:00 PM) Agence Nationale de Certification Electronique (8/12/2037 9:03:17 AM) Agence Nationale de Certification Electronique (8/12/2037 9:58:14 AM) Agencia Catalana de Certificacio (NIF Q-0801176-I) (1/7/2031 10:59:59 PM) America Online Root Certification Authority 1 (11/19/2037 8:43:00 PM) America Online Root Certification Authority 2 (9/29/2037 2:08:00 PM) ANCERT Certificados CGN (2/11/2024 5:27:12 PM) ANCERT Certificados Notariales (2/11/2024 3:58:26 PM) ANCERT Corporaciones de Derecho Publico (2/11/2024 5:22:45 PM) A-Trust-nQual-01 (11/30/2014 11:00:00 PM) A-Trust-nQual-03 (8/17/2015 10:00:00 PM) A-Trust-Qual-01 (11/30/2014 11:00:00 PM) A-Trust-Qual-02 (12/2/2014 11:00:00 PM) A-Trust-Qual-03a (4/24/2018 10:00:00 PM) Austria Telekom-Control Kommission (9/24/2005 12:40:00 PM) Austrian Society for Data Protection (2/12/2009 11:30:30 AM) Austrian Society for Data Protection GLOBALTRUST Certification Service (9/18/2036 2:12:35 PM) Autoridad Certificadora Raiz de la Secretaria de Economia (5/9/2025 12:00:00 AM) Autoridad de Certificacion de la Abogacia (6/13/2030 10:00:00 PM) Autoridad de Certificacion Firmaprofesional CIF A62634068 (10/24/2013 10:00:00 PM) Autoridade Certificadora Raiz Brasileira (11/30/2011 11:59:00 PM) Baltimore CyberTrust Root (5/12/2025 11:59:00 PM) BIT AdminCA-CD-T01 (1/25/2016 12:36:19 PM) BIT Admin-Root-CA (11/10/2021 7:51:07 AM) Buypass Class 2 CA 1 (10/13/2016 10:25:09 AM) Buypass Class 3 CA 1 (5/9/2015 2:13:03 PM) CA Disig (3/22/2016 1:39:34 AM) CertEurope (3/27/2037 11:00:00 PM) CERTICAMARA S.A. (2/23/2015 5:10:37 PM) Certicámara S.A. (5/23/2011 10:00:00 PM) Certigna (6/29/2027 3:13:05 PM) Certipost E-Trust Primary Normalised CA (7/26/2020 10:00:00 AM) Certipost E-Trust Primary Qualified CA (7/26/2020 10:00:00 AM) Certipost E-Trust Primary TOP Root CA (7/26/2025 10:00:00 AM) Certisign Autoridade Certificadora AC1S (6/27/2018 12:00:00 AM) Certisign Autoridade Certificadora AC2 (6/27/2018 12:00:00 AM) Certisign Autoridade Certificadora AC3S (7/9/2018 8:56:32 PM) Certisign Autoridade Certificadora AC4 (6/27/2018 12:00:00 AM) CertPlus Class 1 Primary CA (7/6/2020 11:59:59 PM) CertPlus Class 2 Primary CA (7/6/2019 11:59:59 PM) CertPlus Class 3 Primary CA (7/6/2019 11:59:59 PM) CertPlus Class 3P Primary CA (7/6/2019 11:59:59 PM) CertPlus Class 3TS Primary CA (7/6/2019 11:59:59 PM) CertRSA01 (3/3/2010 2:59:59 PM) certSIGN Root CA (7/4/2031 5:20:04 PM) Certum (6/11/2027 10:46:39 AM) Certum Trusted Network CA (12/31/2029 12:07:37 PM) Chambers of Commerce Root - 2008 (7/31/2038 12:29:50 PM) Chambersign Chambers of Commerce Root (9/30/2037 4:13:44 PM) Chambersign Global Root (9/30/2037 4:14:18 PM) Chambersign Public Notary Root (9/30/2037 4:14:49 PM) Chunghwa Telecom Co. Ltd. (12/20/2034 2:31:27 AM) Cisco Systems (5/14/2029 8:25:42 PM) CNNIC Root (4/16/2027 7:09:14 AM) Common Policy (10/15/2027 4:08:00 PM) COMODO (12/31/2028 11:59:59 PM) COMODO (1/18/2038 11:59:59 PM) COMODO (12/31/2029 11:59:59 PM) ComSign Advanced Security CA (3/24/2029 9:55:55 PM) ComSign CA (3/19/2029 3:02:18 PM) ComSign Secured CA (3/16/2029 3:04:56 PM) Correo Uruguayo - Root CA (12/31/2030 2:59:59 AM) Cybertrust Global Root (12/15/2021 8:00:00 AM) DanID (2/11/2037 9:09:30 AM) DanID (4/5/2021 5:03:17 PM) Deutsche Telekom Root CA 2 (7/9/2019 11:59:00 PM) DigiCert (11/10/2031 12:00:00 AM) DigiCert (11/10/2031 12:00:00 AM) DigiCert (11/10/2031 12:00:00 AM) DigiNotar Root CA (3/31/2025 6:19:21 PM) DIRECCION GENERAL DE LA POLICIA (2/8/2036 10:59:59 PM) DST (ABA.ECOM) CA (7/9/2009 5:33:53 PM) DST (ANX Network) CA (12/9/2018 4:16:48 PM) DST (Baltimore EZ) CA (7/3/2009 7:56:53 PM) DST (National Retail Federation) RootCA (12/8/2008 4:14:16 PM) DST (United Parcel Service) RootCA (12/7/2008 12:25:46 AM) DST ACES CA X6 (11/20/2017 9:19:58 PM) DST Root CA X3 (9/30/2021 2:01:15 PM) DST RootCA X1 (11/28/2008 6:18:55 PM) DST RootCA X2 (11/27/2008 10:46:16 PM) DSTCA E1 (12/10/2018 6:40:23 PM) DSTCA E2 (12/9/2018 7:47:26 PM) DST-Entrust GTI CA (12/9/2018 12:32:24 AM) D-TRUST GmbH (5/16/2022 5:20:47 AM) D-TRUST GmbH (6/8/2012 11:47:46 AM) D-TRUST GmbH (5/16/2022 5:20:47 AM) EBG Elektronik Sertifika Hizmet Saglayicisi (8/14/2016 12:31:09 AM) E-Certchile (9/5/2028 7:39:41 PM) Echoworx Root CA2 (10/7/2030 10:49:13 AM) ECRaizEstado (6/23/2030 1:41:27 PM) EDICOM (4/13/2028 4:24:22 PM) E-GÜVEN Elektronik Sertifika Hizmet Saglayicisi (1/4/2017 11:32:48 AM) E-ME SSI (RCA) (5/19/2027 8:48:15 AM) Entrust (11/27/2026 8:53:42 PM) Entrust (5/25/2019 4:39:40 PM) Entrust.net (12/7/2030 5:55:54 PM) Equifax Secure eBusiness CA-1 (6/21/2020 4:00:00 AM) Equifax Secure eBusiness CA-2 (6/23/2019 12:14:45 PM) Equifax Secure Global eBusiness CA-1 (6/21/2020 4:00:00 AM) eSign Australia: eSign Imperito Primary Root CA (5/23/2012 11:59:59 PM) eSign Australia: Gatekeeper Root CA (5/23/2014 11:59:59 PM) eSign Australia: Primary Utility Root CA (5/23/2012 11:59:59 PM) Fabrica Nacional de Moneda y Timbre (3/18/2019 3:26:19 PM) GeoTrust (8/22/2018 4:41:51 PM) GeoTrust (7/16/2036 11:59:59 PM) GeoTrust Global CA (5/21/2022 4:00:00 AM) GeoTrust Global CA 2 (3/4/2019 5:00:00 AM) GeoTrust Primary Certification Authority - G2 (1/18/2038 11:59:59 PM) GeoTrust Primary Certification Authority - G3 (12/1/2037 11:59:59 PM) GeoTrust Universal CA (3/4/2029 5:00:00 AM) GeoTrust Universal CA 2 (3/4/2029 5:00:00 AM) Global Chambersign Root - 2008 (7/31/2038 12:31:40 PM) GlobalSign (1/28/2028 12:00:00 PM) GlobalSign (12/15/2021 8:00:00 AM) Go Daddy Class 2 Certification Authority (6/29/2034 5:06:20 PM) GTE CyberTrust Global Root (8/13/2018 11:59:00 PM) GTE CyberTrust Root (4/3/2004 11:59:00 PM) GTE CyberTrust Root (2/23/2006 11:59:00 PM) Halcom CA FO (6/5/2020 10:33:31 AM) Halcom CA PO 2 (2/7/2019 6:33:31 PM) Hongkong Post Root CA (1/16/2010 11:59:00 PM) Hongkong Post Root CA 1 (5/15/2023 4:52:29 AM) I.CA První certifikacní autorita a.s. (4/1/2018 12:00:00 AM) I.CA První certifikacní autorita a.s. (4/1/2018 12:00:00 AM) InfoNotary (3/6/2026 5:33:05 PM) IPS SERVIDORES (12/29/2009 11:21:07 PM) IZENPE S.A. (1/30/2018 11:00:00 PM) Izenpe.com (12/13/2037 8:27:25 AM) Japan Certification Services, Inc. SecureSign RootCA1 (9/15/2020 2:59:59 PM) Japan Certification Services, Inc. SecureSign RootCA11 (4/8/2029 4:56:47 AM) Japan Certification Services, Inc. SecureSign RootCA2 (9/15/2020 2:59:59 PM) Japan Certification Services, Inc. SecureSign RootCA3 (9/15/2020 2:59:59 PM) Japan Local Government PKI Application CA (3/31/2016 2:59:59 PM) Japanese Government ApplicationCA (12/12/2017 3:00:00 PM) Juur-SK AS Sertifitseerimiskeskus (8/26/2016 2:23:01 PM) KamuSM (8/21/2017 11:37:07 AM) KISA RootCA 1 (8/24/2025 8:05:46 AM) KISA RootCA 3 (11/19/2014 6:39:51 AM) Macao Post eSignTrust (1/29/2013 11:59:59 PM) MicroSec e-Szigno Root CA (4/6/2017 12:28:44 PM) Microsoft Authenticode(tm) Root (12/31/1999 11:59:59 PM) Microsoft Root Authority (12/31/2020 7:00:00 AM) Microsoft Root Certificate Authority (5/9/2021 11:28:13 PM) Microsoft Timestamp Root (12/30/1999 11:59:59 PM) MOGAHA Govt of Korea (4/21/2012 9:07:23 AM) MOGAHA Govt of Korea GPKI (3/15/2017 6:00:04 AM) NetLock Arany (Class Gold) Fotanúsítvány (12/6/2028 3:08:21 PM) NetLock Expressz (Class C) Tanusitvanykiado (2/20/2019 2:08:11 PM) NetLock Kozjegyzoi (Class A) Tanusitvanykiado (2/19/2019 11:14:47 PM) NetLock Minositett Kozjegyzoi (Class QA) Tanusitvanykiado (12/15/2022 1:47:11 AM) NetLock Platina (Class Platinum) Fotanúsítvány (12/6/2028 3:12:44 PM) NetLock Uzleti (Class B) Tanusitvanykiado (2/20/2019 2:10:22 PM) Netrust CA1 (3/30/2021 2:57:45 AM) Network Solutions (12/31/2029 11:59:59 PM) NLB Nova Ljubljanska Banka d.d. Ljubljana (5/15/2023 12:22:45 PM) OISTE WISeKey Global Root GA CA (12/11/2037 4:09:51 PM) Post.Trust Root CA (7/5/2022 9:12:33 AM) Post.Trust Root CA (8/20/2010 1:56:21 PM) Posta CA Root (10/20/2028 12:52:08 PM) POSTarCA (2/7/2023 11:06:58 AM) QuoVadis Root CA 2 (11/24/2031 6:23:33 PM) QuoVadis Root CA 3 (11/24/2031 7:06:44 PM) QuoVadis Root Certification Authority (3/17/2021 6:33:33 PM) Root CA Generalitat Valenciana (7/1/2021 3:22:47 PM) RSA Security 2048 V3 (2/22/2026 8:39:23 PM) SECOM Trust Systems CO LTD (6/6/2037 2:12:32 AM) SECOM Trust Systems CO LTD (6/25/2019 10:23:48 PM) SECOM Trust Systems CO LTD (9/30/2023 4:20:49 AM) Secretaria de Economia Mexico (5/8/2025 12:00:00 AM) Secrétariat Général de la Défense Nationale (10/17/2020 2:29:22 PM) SecureNet CA Class B (10/16/2009 9:59:00 AM) Serasa Certificate Authority I (11/21/2024 2:12:45 PM) Serasa Certificate Authority II (11/21/2024 12:44:48 PM) Serasa Certificate Authority III (11/21/2024 1:24:14 PM) SERVICIOS DE CERTIFICACION - A.N.C. (3/9/2009 9:08:07 PM) Sigen-CA (6/29/2021 9:57:46 PM) Sigov-CA (1/10/2021 2:22:52 PM) Skaitmeninio sertifikavimo centras (12/28/2026 12:05:04 PM) Skaitmeninio sertifikavimo centras (12/25/2026 12:08:26 PM) Skaitmeninio sertifikavimo centras (12/22/2026 12:11:30 PM) Sonera Class1 CA (4/6/2021 10:49:13 AM) Sonera Class2 CA (4/6/2021 7:29:40 AM) Spanish Property & Commerce Registry CA (4/27/2012 9:39:50 AM) Staat der Nederlanden Root CA (12/16/2015 9:15:38 AM) Staat der Nederlanden Root CA - G2 (3/25/2020 11:03:10 AM) Starfield Class 2 Certification Authority (6/29/2034 5:39:16 PM) Starfield Technologies (6/26/2019 12:19:54 AM) Starfield Technologies Inc. (12/31/2029 11:59:59 PM) StartCom Certification Authority (9/17/2036 7:46:36 PM) S-TRUST Authentication and Encryption Root CA 2005:PN (6/21/2030 11:59:59 PM) Swisscom Root CA 1 (8/18/2025 10:06:20 PM) SwissSign (10/25/2036 8:30:35 AM) SwissSign Platinum G2 Root CA (10/25/2036 8:36:00 AM) SwissSign Silver G2 Root CA (10/25/2036 8:32:46 AM) TC TrustCenter Class 1 CA (1/1/2011 11:59:59 AM) TC TrustCenter Class 2 CA (1/1/2011 11:59:59 AM) TC TrustCenter Class 2 CA II (12/31/2025 10:59:59 PM) TC TrustCenter Class 3 CA (1/1/2011 11:59:59 AM) TC TrustCenter Class 3 CA II (12/31/2025 10:59:59 PM) TC TrustCenter Class 4 CA (1/1/2011 11:59:59 AM) TC TrustCenter Class 4 CA II (12/31/2025 10:59:59 PM) TC TrustCenter Time Stamping CA (1/1/2011 11:59:59 AM) TC TrustCenter Universal CA I (12/31/2025 10:59:59 PM) TC TrustCenter Universal CA II (12/31/2030 10:59:59 PM) thawte (12/31/2020 11:59:59 PM) thawte (7/16/2036 11:59:59 PM) thawte (12/31/2020 11:59:59 PM) thawte (12/31/2020 11:59:59 PM) thawte (12/31/2020 11:59:59 PM) thawte (12/31/2020 11:59:59 PM) thawte (12/31/2020 11:59:59 PM) thawte Primary Root CA - G2 (1/18/2038 11:59:59 PM) thawte Primary Root CA - G3 (12/1/2037 11:59:59 PM) Thawte Timestamping CA (12/31/2020 11:59:59 PM) Trustis EVS Root CA (1/9/2027 11:56:00 AM) Trustis FPS Root CA (1/21/2024 11:36:54 AM) Trustwave (1/1/2035 5:37:19 AM) Trustwave (12/31/2029 7:40:55 PM) Trustwave (12/31/2029 7:52:06 PM) TURKTRUST Elektronik Islem Hizmetleri (9/16/2015 12:13:05 PM) TURKTRUST Elektronik Islem Hizmetleri (3/22/2015 10:04:51 AM) TURKTRUST Elektronik Sertifika Hizmet Saglayicisi (9/16/2015 10:07:57 AM) TURKTRUST Elektronik Sertifika Hizmet Saglayicisi (3/22/2015 10:27:17 AM) TÜRKTRUST Elektronik Sertifika Hizmet Saglayicisi (12/22/2017 6:37:19 PM) TW Government Root Certification Authority (12/5/2032 1:23:33 PM) TWCA Root Certification Authority 1 (12/31/2030 3:59:59 PM) TWCA Root Certification Authority 2 (12/31/2030 3:59:59 PM) U.S. Government FBCA (10/6/2010 6:53:56 PM) UCA Global Root (12/31/2037 12:00:00 AM) UCA Root (12/31/2029 12:00:00 AM) USERTrust (7/9/2019 6:40:36 PM) USERTrust (7/9/2019 5:36:58 PM) USERTrust (6/24/2019 7:06:30 PM) USERTrust (7/9/2019 6:19:22 PM) USERTrust (5/30/2020 10:48:38 AM) UTN - USERFirst-Network Applications (7/9/2019 6:57:49 PM) ValiCert Class 3 Policy Validation Authority (6/26/2019 12:22:33 AM) VAS Latvijas Pasts SSI(RCA) (9/13/2024 9:27:57 AM) VeriSign (5/18/2018 11:59:59 PM) VeriSign (7/16/2036 11:59:59 PM) VeriSign (8/1/2028 11:59:59 PM) VeriSign (12/31/1999 9:37:48 AM) VeriSign (1/7/2004 11:59:59 PM) VeriSign (5/18/2018 11:59:59 PM) VeriSign (1/7/2004 11:59:59 PM) VeriSign (8/1/2028 11:59:59 PM) VeriSign (8/1/2028 11:59:59 PM) VeriSign (1/7/2020 11:59:59 PM) VeriSign (12/31/1999 9:35:58 AM) VeriSign (8/1/2028 11:59:59 PM) VeriSign (7/16/2036 11:59:59 PM) VeriSign (1/7/2004 11:59:59 PM) VeriSign (7/16/2036 11:59:59 PM) VeriSign (1/7/2010 11:59:59 PM) VeriSign (5/18/2018 11:59:59 PM) VeriSign (8/1/2028 11:59:59 PM) VeriSign (1/7/2004 11:59:59 PM) VeriSign (7/16/2036 11:59:59 PM) VeriSign (7/16/2036 11:59:59 PM) VeriSign (8/1/2028 11:59:59 PM) VeriSign (5/18/2018 11:59:59 PM) VeriSign Class 3 Public Primary CA (8/1/2028 11:59:59 PM) VeriSign Class 3 Public Primary Certification Authority - G4 (1/18/2038 11:59:59 PM) VeriSign Time Stamping CA (1/7/2004 11:59:59 PM) VeriSign Universal Root Certification Authority (12/1/2037 11:59:59 PM) Visa eCommerce Root (6/24/2022 12:16:12 AM) Visa Information Delivery Root CA (6/29/2025 5:42:42 PM) VRK Gov. Root CA (12/18/2023 1:51:08 PM) Wells Fargo Root Certificate Authority (1/14/2021 4:41:28 PM) WellsSecure Public Certificate Authority (12/14/2022 12:07:54 AM) Xcert EZ by DST (7/11/2009 4:14:18 PM)

  Read the article

• Entity Framework version 1- Brief Synopsis and Tips &ndash; Part 1

  - by Rohit Gupta

  To Do Eager loading use Projections (for e.g. from c in context.Contacts select c, c.Addresses)  or use Include Query Builder Methods (Include(“Addresses”)) If there is multi-level hierarchical Data then to eager load all the relationships use Include Query Builder methods like customers.Include("Order.OrderDetail") to include Order and OrderDetail collections or use customers.Include("Order.OrderDetail.Location") to include all Order, OrderDetail and location collections with a single include statement =========================================================================== If the query uses Joins then Include() Query Builder method will be ignored, use Nested Queries instead If the query does projections then Include() Query Builder method will be ignored Use Address.ContactReference.Load() OR Contact.Addresses.Load() if you need to Deferred Load Specific Entity – This will result in extra round trips to the database ObjectQuery<> cannot return anonymous types... it will return a ObjectQuery<DBDataRecord> Only Include method can be added to Linq Query Methods Any Linq Query method can be added to Query Builder methods. If you need to append a Query Builder Method (other than Include) after a LINQ method  then cast the IQueryable<Contact> to ObjectQuery<Contact> and then append the Query Builder method to it =========================================================================== Query Builder methods are Select, Where, Include Methods which use Entity SQL as parameters e.g. "it.StartDate, it.EndDate" When Query Builder methods do projection then they return ObjectQuery<DBDataRecord>, thus to iterate over this collection use contact.Item[“Name”].ToString() When Linq To Entities methods do projection, they return collection of anonymous types --- thus the collection is strongly typed and supports Intellisense EF Object Context can track changes only on Entities, not on Anonymous types. If you use a Defining Query for a EntitySet then the EntitySet becomes readonly since a Defining Query is the same as a View (which is treated as a ReadOnly by default). However if you want to use this EntitySet for insert/update/deletes then we need to map stored procs (as created in the DB) to the insert/update/delete functions of the Entity in the Designer You can use either Execute method or ToList() method to bind data to datasources/bindingsources If you use the Execute Method then remember that you can traverse through the ObjectResult<> collection (returned by Execute) only ONCE. In WPF use ObservableCollection to bind to data sources , for keeping track of changes and letting EF send updates to the DB automatically. Use Extension Methods to add logic to Entities. For e.g. create extension methods for the EntityObject class. Create a method in ObjectContext Partial class and pass the entity as a parameter, then call this method as desired from within each entity. ================================================================ DefiningQueries and Stored Procedures: For Custom Entities, one can use DefiningQuery or Stored Procedures. Thus the Custom Entity Collection will be populated using the DefiningQuery (of the EntitySet) or the Sproc. If you use Sproc to populate the EntityCollection then the query execution is immediate and this execution happens on the Server side and any filters applied will be applied in the Client App. If we use a DefiningQuery then these queries are composable, meaning the filters (if applied to the entityset) will all be sent together as a single query to the DB, returning only filtered results. If the sproc returns results that cannot be mapped to existing entity, then we first create the Entity/EntitySet in the CSDL using Designer, then create a dummy Entity/EntitySet using XML in the SSDL. When creating a EntitySet in the SSDL for this dummy entity, use a TSQL that does not return any results, but does return the relevant columns e.g. select ContactID, FirstName, LastName from dbo.Contact where 1=2 Also insure that the Entity created in the SSDL uses the SQL DataTypes and not .NET DataTypes. If you are unable to open the EDMX file in the designer then note the Errors ... they will give precise info on what is wrong. The Thrid option is to simply create a Native Query in the SSDL using <Function Name="PaymentsforContact" IsComposable="false">   <CommandText>SELECT ActivityId, Activity AS ActivityName, ImagePath, Category FROM dbo.Activities </CommandText></FuncTion> Then map this Function to a existing Entity. This is a quick way to get a custom Entity which is regular Entity with renamed columns or additional columns (which are computed columns). The disadvantage to using this is that It will return all the rows from the Defining query and any filter (if defined) will be applied only at the Client side (after getting all the rows from DB). If you you DefiningQuery instead then we can use that as a Composable Query. The Fourth option (for mapping a READ stored proc results to a non-existent Entity) is to create a View in the Database which returns all the fields that the sproc also returns, then update the Model so that the model contains this View as a Entity. Then map the Read Sproc to this View Entity. The other option would be to simply create the View and remove the sproc altogether. ================================================================ To Execute a SProc that does not return a entity, use a EntityCommand to execute that proc. You cannot call a sproc FunctionImport that does not return Entities From Code, the only way is to use SSDL function calls using EntityCommand.  This changes with EntityFramework Version 4 where you can return Scalar Types, Complex Types, Entities or NonQuery ================================================================ UDF when created as a Function in SSDL, we need to set the Name & IsComposable properties for the Function element. IsComposable is always false for Sprocs, for UDF's set this to true. You cannot call UDF "Function" from within code since you cannot import a UDF Function into the CSDL Model (with Version 1 of EF). only stored procedures can be imported and then mapped to a entity ================================================================ Entity Framework requires properties that are involved in association mappings to be mapped in all of the function mappings for the entity (Insert, Update and Delete). Because Payment has an association to Reservation... hence we need to pass both the paymentId and reservationId to the Delete sproc even though just the paymentId is the PK on the Payment Table. ================================================================ When mapping insert, update and delete procs to a Entity, insure that all the three or none are mapped. Further if you have a base class and derived class in the CSDL, then you must map (ins, upd, del) sprocs to all parent and child entities in the inheritance relationship. Note that this limitation that base and derived entity methods must all must be mapped does not apply when you are mapping Read Stored Procedures.... ================================================================ You can write stored procedures SQL directly into the SSDL by creating a Function element in the SSDL and then once created, you can map this Function to a CSDL Entity directly in the designer during Function Import ================================================================ You can do Entity Splitting such that One Entity maps to multiple tables in the DB. For e.g. the Customer Entity currently derives from Contact Entity...in addition it also references the ContactPersonalInfo Entity. One can copy all properties from the ContactPersonalInfo Entity into the Customer Entity and then Delete the CustomerPersonalInfo entity, finall one needs to map the copied properties to the ContactPersonalInfo Table in Table Mapping (by adding another table (ContactPersonalInfo) to the Table Mapping... this is called Entity Splitting. Thus now when you insert a Customer record, it will automatically create SQL to insert records into the Contact, Customers and ContactPersonalInfo tables even though you have a Single Entity called Customer in the CSDL =================================================================== There is Table by Type Inheritance where another EDM Entity can derive from another EDM entity and absorb the inherted entities properties, for example in the Break Away Geek Adventures EDM, the Customer entity derives (inherits) from the Contact Entity and absorbs all the properties of Contact entity. Thus when you create a Customer Entity in Code and then call context.SaveChanges the Object Context will first create the TSQL to insert into the Contact Table followed by a TSQL to insert into the Customer table =================================================================== Then there is the Table per Hierarchy Inheritance..... where different types are created based on a condition (similar applying a condition to filter a Entity to contain filtered records)... the diference being that the filter condition populates a new Entity Type (derived from the base Entity). In the BreakAway sample the example is Lodging Entity which is a Abstract Entity and Then Resort and NonResort Entities which derive from Lodging Entity and records are filtered based on the value of the Resort Boolean field =================================================================== Then there is Table per Concrete Type Hierarchy where we create a concrete Entity for each table in the database. In the BreakAway sample there is a entity for the Reservation table and another Entity for the OldReservation table even though both the table contain the same number of fields. The OldReservation Entity can then inherit from the Reservation Entity and configure the OldReservation Entity to remove all Scalar Properties from the Entity (since it inherits the properties from Reservation and filters based on ReservationDate field) =================================================================== Complex Types (Complex Properties) Entities in EF can also contain Complex Properties (in addition to Scalar Properties) and these Complex Properties reference a ComplexType (not a EntityType) DropdownList, ListBox, RadioButtonList, CheckboxList, Bulletedlist are examples of List server controls (not data bound controls) these controls cannot use Complex properties during databinding, they need Scalar Properties. So if a Entity contains Complex properties and you need to bind those to list server controls then use projections to return Scalar properties and bind them to the control (the disadvantage is that projected collections are not tracked by the Object Context and hence cannot persist changes to the projected collections bound to controls) ObjectDataSource and EntityDataSource do account for Complex properties and one can bind entities with Complex Properties to Data Source controls and they will be tracked for changes... with no additional plumbing needed to persist changes to these collections bound to controls So DataBound controls like GridView, FormView need to use EntityDataSource or ObjectDataSource as a datasource for entities that contain Complex properties so that changes to the datasource done using the GridView can be persisted to the DB (enabling the controls for updates)....if you cannot use the EntityDataSource you need to flatten the ComplexType Properties using projections With EF Version 4 ComplexTypes are supported by the Designer and can add/remove/compose Complex Types directly using the Designer =================================================================== Conditional Mapping ... is like Table per Hierarchy Inheritance where Entities inherit from a base class and then used conditions to populate the EntitySet (called conditional Mapping). Conditional Mapping has limitations since you can only use =, is null and IS NOT NULL Conditions to do conditional mapping. If you need more operators for filtering/mapping conditionally then use QueryView(or possibly Defining Query) to create a readonly entity. QueryView are readonly by default... the EntitySet created by the QueryView is enabled for change tracking by the ObjectContext, however the ObjectContext cannot create insert/update/delete TSQL statements for these Entities when SaveChanges is called since it is QueryView. One way to get around this limitation is to map stored procedures for the insert/update/delete operations in the Designer. =================================================================== Difference between QueryView and Defining Query : QueryView is defined in the (MSL) Mapping File/section of the EDM XML, whereas the DefiningQuery is defined in the store schema (SSDL). QueryView is written using Entity SQL and is this database agnostic and can be used against any database/Data Layer. DefiningQuery is written using Database Lanaguage i.e. TSQL or PSQL thus you have more control =================================================================== Performance: Lazy loading is deferred loading done automatically. lazy loading is supported with EF version4 and is on by default. If you need to turn it off then use context.ContextOptions.lazyLoadingEnabled = false To improve Performance consider PreCompiling the ObjectQuery using the CompiledQuery.Compile method

  Read the article

• Adventures in MVVM &ndash; My ViewModel Base

  - by Brian Genisio's House Of Bilz

  More Adventures in MVVM First, I’d like to say: THIS IS NOT A NEW MVVM FRAMEWORK. I tend to believe that MVVM support code should be specific to the system you are building and the developers working on it.  I have yet to find an MVVM framework that does everything I want it to without doing too much.  Don’t get me wrong… there are some good frameworks out there.  I just like to pick and choose things that make sense for me.  I’d also like to add that some of these features only work in WPF.  As of Silveright 4, they don’t support binding to dynamic properties, so some of the capabilities are lost. That being said, I want to share my ViewModel base class with the world.  I have had several conversations with people about the problems I have solved using this ViewModel base.  A while back, I posted an article about some experiments with a “Rails Inspired ViewModel”.  What followed from those ideas was a ViewModel base class that I take with me and use in my projects.  It has a lot of features, all designed to reduce the friction in writing view models. I have put the code out on Codeplex under the project: ViewModelSupport. Finally, this article focuses on the ViewModel and only glosses over the View and the Model.  Without all three, you don’t have MVVM.  But this base class is for the ViewModel, so that is what I am focusing on. Features: Automatic Command Plumbing Property Change Notification Strongly Typed Property Getter/Setters Dynamic Properties Default Property values Derived Properties Automatic Method Execution Command CanExecute Change Notification Design-Time Detection What about Silverlight? Automatic Command Plumbing This feature takes the plumbing out of creating commands.  The common pattern for commands in a ViewModel is to have an Execute method as well as an optional CanExecute method.  To plumb that together, you create an ICommand Property, and set it in the constructor like so: Before public class AutomaticCommandViewModel { public AutomaticCommandViewModel() { MyCommand = new DelegateCommand(Execute_MyCommand, CanExecute_MyCommand); } public void Execute_MyCommand() { // Do something } public bool CanExecute_MyCommand() { // Are we in a state to do something? return true; } public DelegateCommand MyCommand { get; private set; } } With the base class, this plumbing is automatic and the property (MyCommand of type ICommand) is created for you.  The base class uses the convention that methods be prefixed with Execute_ and CanExecute_ in order to be plumbed into commands with the property name after the prefix.  You are left to be expressive with your behavior without the plumbing.  If you are wondering how CanExecuteChanged is raised, see the later section “Command CanExecute Change Notification”. After public class AutomaticCommandViewModel : ViewModelBase { public void Execute_MyCommand() { // Do something } public bool CanExecute_MyCommand() { // Are we in a state to do something? return true; } }   Property Change Notification One thing that always kills me when implementing ViewModels is how to make properties that notify when they change (via the INotifyPropertyChanged interface).  There have been many attempts to make this more automatic.  My base class includes one option.  There are others, but I feel like this works best for me. The common pattern (without my base class) is to create a private backing store for the variable and specify a getter that returns the private field.  The setter will set the private field and fire an event that notifies the change, only if the value has changed. Before public class PropertyHelpersViewModel : INotifyPropertyChanged { private string text; public string Text { get { return text; } set { if(text != value) { text = value; RaisePropertyChanged("Text"); } } } protected void RaisePropertyChanged(string propertyName) { var handlers = PropertyChanged; if(handlers != null) handlers(this, new PropertyChangedEventArgs(propertyName)); } public event PropertyChangedEventHandler PropertyChanged; } This way of defining properties is error-prone and tedious.  Too much plumbing.  My base class eliminates much of that plumbing with the same functionality: After public class PropertyHelpersViewModel : ViewModelBase { public string Text { get { return Get<string>("Text"); } set { Set("Text", value);} } }   Strongly Typed Property Getters/Setters It turns out that we can do better than that.  We are using a strongly typed language where the use of “Magic Strings” is often frowned upon.  Lets make the names in the getters and setters strongly typed: A refinement public class PropertyHelpersViewModel : ViewModelBase { public string Text { get { return Get(() => Text); } set { Set(() => Text, value); } } }   Dynamic Properties In C# 4.0, we have the ability to program statically OR dynamically.  This base class lets us leverage the powerful dynamic capabilities in our ecosystem. (This is how the automatic commands are implemented, BTW)  By calling Set(“Foo”, 1), you have now created a dynamic property called Foo.  It can be bound against like any static property.  The opportunities are endless.  One great way to exploit this behavior is if you have a customizable view engine with templates that bind to properties defined by the user.  The base class just needs to create the dynamic properties at runtime from information in the model, and the custom template can bind even though the static properties do not exist. All dynamic properties still benefit from the notifiable capabilities that static properties do. For any nay-sayers out there that don’t like using the dynamic features of C#, just remember this: the act of binding the View to a ViewModel is dynamic already.  Why not exploit it?  Get over it :) Just declare the property dynamically public class DynamicPropertyViewModel : ViewModelBase { public DynamicPropertyViewModel() { Set("Foo", "Bar"); } } Then reference it normally <TextBlock Text="{Binding Foo}" />   Default Property Values The Get() method also allows for default properties to be set.  Don’t set them in the constructor.  Set them in the property and keep the related code together: public string Text { get { return Get(() => Text, "This is the default value"); } set { Set(() => Text, value);} }   Derived Properties This is something I blogged about a while back in more detail.  This feature came from the chaining of property notifications when one property affects the results of another, like this: Before public class DependantPropertiesViewModel : ViewModelBase { public double Score { get { return Get(() => Score); } set { Set(() => Score, value); RaisePropertyChanged("Percentage"); RaisePropertyChanged("Output"); } } public int Percentage { get { return (int)(100 * Score); } } public string Output { get { return "You scored " + Percentage + "%."; } } } The problem is: The setter for Score has to be responsible for notifying the world that Percentage and Output have also changed.  This, to me, is backwards.    It certainly violates the “Single Responsibility Principle.” I have been bitten in the rear more than once by problems created from code like this.  What we really want to do is invert the dependency.  Let the Percentage property declare that it changes when the Score Property changes. After public class DependantPropertiesViewModel : ViewModelBase { public double Score { get { return Get(() => Score); } set { Set(() => Score, value); } } [DependsUpon("Score")] public int Percentage { get { return (int)(100 * Score); } } [DependsUpon("Percentage")] public string Output { get { return "You scored " + Percentage + "%."; } } }   Automatic Method Execution This one is extremely similar to the previous, but it deals with method execution as opposed to property.  When you want to execute a method triggered by property changes, let the method declare the dependency instead of the other way around. Before public class DependantMethodsViewModel : ViewModelBase { public double Score { get { return Get(() => Score); } set { Set(() => Score, value); WhenScoreChanges(); } } public void WhenScoreChanges() { // Handle this case } } After public class DependantMethodsViewModel : ViewModelBase { public double Score { get { return Get(() => Score); } set { Set(() => Score, value); } } [DependsUpon("Score")] public void WhenScoreChanges() { // Handle this case } }   Command CanExecute Change Notification Back to Commands.  One of the responsibilities of commands that implement ICommand – it must fire an event declaring that CanExecute() needs to be re-evaluated.  I wanted to wait until we got past a few concepts before explaining this behavior.  You can use the same mechanism here to fire off the change.  In the CanExecute_ method, declare the property that it depends upon.  When that property changes, the command will fire a CanExecuteChanged event, telling the View to re-evaluate the state of the command.  The View will make appropriate adjustments, like disabling the button. DependsUpon works on CanExecute methods as well public class CanExecuteViewModel : ViewModelBase { public void Execute_MakeLower() { Output = Input.ToLower(); } [DependsUpon("Input")] public bool CanExecute_MakeLower() { return !string.IsNullOrWhiteSpace(Input); } public string Input { get { return Get(() => Input); } set { Set(() => Input, value);} } public string Output { get { return Get(() => Output); } set { Set(() => Output, value); } } }   Design-Time Detection If you want to add design-time data to your ViewModel, the base class has a property that lets you ask if you are in the designer.  You can then set some default values that let your designer see what things might look like in runtime. Use the IsInDesignMode property public DependantPropertiesViewModel() { if(IsInDesignMode) { Score = .5; } }   What About Silverlight? Some of the features in this base class only work in WPF.  As of version 4, Silverlight does not support binding to dynamic properties.  This, in my opinion, is a HUGE limitation.  Not only does it keep you from using many of the features in this ViewModel, it also keeps you from binding to ViewModels designed in IronRuby.  Does this mean that the base class will not work in Silverlight?  No.  Many of the features outlined in this article WILL work.  All of the property abstractions are functional, as long as you refer to them statically in the View.  This, of course, means that the automatic command hook-up doesn’t work in Silverlight.  You need to plumb it to a static property in order for the Silverlight View to bind to it.  Can I has a dynamic property in SL5?     Good to go? So, that concludes the feature explanation of my ViewModel base class.  Feel free to take it, fork it, whatever.  It is hosted on CodePlex.  When I find other useful additions, I will add them to the public repository.  I use this base class every day.  It is mature, and well tested.  If, however, you find any problems with it, please let me know!  Also, feel free to suggest patches to me via the CodePlex site.  :)

  Read the article

• Connecting Linux to WatchGuard Firebox SSL (OpenVPN client)

  Recently, I got a new project assignment that requires to connect permanently to the customer's network through VPN. They are using a so-called SSL VPN. As I am using OpenVPN since more than 5 years within my company's network I was quite curious about their solution and how it would actually be different from OpenVPN. Well, short version: It is a disguised version of OpenVPN. Unfortunately, the company only offers a client for Windows and Mac OS which shouldn't bother any Linux user after all. OpenVPN is part of every recent distribution and can be activated in a couple of minutes - both client as well as server (if necessary). WatchGuard Firebox SSL - About dialog Borrowing some files from a Windows client installation Initially, I didn't know about the product, so therefore I went through the installation on Windows 8. No obstacles (and no restart despite installation of TAP device drivers!) here and the secured VPN channel was up and running in less than 2 minutes or so. Much appreciated from both parties - customer and me. Of course, this whole client package and my long year approved and stable installation ignited my interest to have a closer look at the WatchGuard client. Compared to the original OpenVPN client (okay, I have to admit this is years ago) this commercial product is smarter in terms of file locations during installation. You'll be able to access the configuration and key files below your roaming application data folder. To get there, simply enter '%AppData%\WatchGuard\Mobile VPN' in your Windows/File Explorer and confirm with Enter/Return. This will display the following files: Application folder below user profile with configuration and certificate files From there we are going to borrow four files, namely: ca.crt client.crt client.ovpn client.pem and transfer them to the Linux system. You might also be able to isolate those four files from a Mac OS client. Frankly, I'm just too lazy to run the WatchGuard client installation on a Mac mini only to find the folder location, and I'm going to describe why a little bit further down this article. I know that you can do that! Feedback in the comment section is appreciated. Configuration of OpenVPN (console) Depending on your distribution the following steps might be a little different but in general you should be able to get the important information from it. I'm going to describe the steps in Ubuntu 13.04 (Raring Ringtail). As usual, there are two possibilities to achieve your goal: console and UI. Let's what it is necessary to be done. First of all, you should ensure that you have OpenVPN installed on your system. Open your favourite terminal application and run the following statement: $ sudo apt-get install openvpn network-manager-openvpn network-manager-openvpn-gnome Just to be on the safe side. The four above mentioned files from your Windows machine could be copied anywhere but either you place them below your own user directory or you put them (as root) below the default directory: /etc/openvpn At this stage you would be able to do a test run already. Just in case, run the following command and check the output (it's the similar information you would get from the 'View Logs...' context menu entry in Windows: $ sudo openvpn --config client.ovpn Pay attention to the correct path to your configuration and certificate files. OpenVPN will ask you to enter your Auth Username and Auth Password in order to establish the VPN connection, same as the Windows client. Remote server and user authentication to establish the VPN Please complete the test run and see whether all went well. You can disconnect pressing Ctrl+C. Simplifying your life - authentication file In my case, I actually set up the OpenVPN client on my gateway/router. This establishes a VPN channel between my network and my client's network and allows me to switch machines easily without having the necessity to install the WatchGuard client on each and every machine. That's also very handy for my various virtualised Windows machines. Anyway, as the client configuration, key and certificate files are located on a headless system somewhere under the roof, it is mandatory to have an automatic connection to the remote site. For that you should first change the file extension '.ovpn' to '.conf' which is the default extension on Linux systems for OpenVPN, and then open the client configuration file in order to extend an existing line. $ sudo mv client.ovpn client.conf $ sudo nano client.conf You should have a similar content to this one here: dev tunclientproto tcp-clientca ca.crtcert client.crtkey client.pemtls-remote "/O=WatchGuard_Technologies/OU=Fireware/CN=Fireware_SSLVPN_Server"remote-cert-eku "TLS Web Server Authentication"remote 1.2.3.4 443persist-keypersist-tunverb 3mute 20keepalive 10 60cipher AES-256-CBCauth SHA1float 1reneg-sec 3660nobindmute-replay-warningsauth-user-pass auth.txt Note: I changed the IP address of the remote directive above (which should be obvious, right?). Anyway, the required change is marked in red and we have to create a new authentication file 'auth.txt'. You can give the directive 'auth-user-pass' any file name you'd like to. Due to my existing OpenVPN infrastructure my setup differs completely from the above written content but for sake of simplicity I just keep it 'as-is'. Okay, let's create this file 'auth.txt' $ sudo nano auth.txt and just put two lines of information in it - username on the first, and password on the second line, like so: myvpnusernameverysecretpassword Store the file, change permissions, and call openvpn with your configuration file again: $ sudo chmod 0600 auth.txt $ sudo openvpn --config client.conf This should now work without being prompted to enter username and password. In case that you placed your files below the system-wide location /etc/openvpn you can operate your VPNs also via service command like so: $ sudo service openvpn start client $ sudo service openvpn stop client Using Network Manager For newer Linux users or the ones with 'console-phobia' I'm going to describe now how to use Network Manager to setup the OpenVPN client. For this move your mouse to the systray area and click on Network Connections => VPN Connections => Configure VPNs... which opens your Network Connections dialog. Alternatively, use the HUD and enter 'Network Connections'. Network connections overview in Ubuntu Click on 'Add' button. On the next dialog select 'Import a saved VPN configuration...' from the dropdown list and click on 'Create...' Choose connection type to import VPN configuration Now you navigate to your folder where you put the client files from the Windows system and you open the 'client.ovpn' file. Next, on the tab 'VPN' proceed with the following steps (directives from the configuration file are referred): General Check the IP address of Gateway ('remote' - we used 1.2.3.4 in this setup) Authentication Change Type to 'Password with Certificates (TLS)' ('auth-pass-user') Enter User name to access your client keys (Auth Name: myvpnusername) Enter Password (Auth Password: verysecretpassword) and choose your password handling Browse for your User Certificate ('cert' - should be pre-selected with client.crt) Browse for your CA Certificate ('ca' - should be filled as ca.crt) Specify your Private Key ('key' - here: client.pem) Then click on the 'Advanced...' button and check the following values: Use custom gateway port: 443 (second value of 'remote' directive) Check the selected value of Cipher ('cipher') Check HMAC Authentication ('auth') Enter the Subject Match: /O=WatchGuard_Technologies/OU=Fireware/CN=Fireware_SSLVPN_Server ('tls-remote') Finally, you have to confirm and close all dialogs. You should be able to establish your OpenVPN-WatchGuard connection via Network Manager. For that, click on the 'VPN Connections => client' entry on your Network Manager in the systray. It is advised that you keep an eye on the syslog to see whether there are any problematic issues that would require some additional attention. Advanced topic: routing As stated above, I'm running the 'WatchGuard client for Linux' on my head-less server, and since then I'm actually establishing a secure communication channel between two networks. In order to enable your network clients to get access to machines on the remote side there are two possibilities to enable that: Proper routing on both sides of the connection which enables both-direction access, or Network masquerading on the 'client side' of the connection Following, I'm going to describe the second option a little bit more in detail. The Linux system that I'm using is already configured as a gateway to the internet. I won't explain the necessary steps to do that, and will only focus on the additional tweaks I had to do. You can find tons of very good instructions and tutorials on 'How to setup a Linux gateway/router' - just use Google. OK, back to the actual modifications. First, we need to have some information about the network topology and IP address range used on the 'other' side. We can get this very easily from /var/log/syslog after we established the OpenVPN channel, like so: $ sudo tail -n20 /var/log/syslog Or if your system is quite busy with logging, like so: $ sudo less /var/log/syslog | grep ovpn The output should contain PUSH received message similar to the following one: Jul 23 23:13:28 ios1 ovpn-client[789]: PUSH: Received control message: 'PUSH_REPLY,topology subnet,route 192.168.1.0 255.255.255.0,dhcp-option DOMAIN ,route-gateway 192.168.6.1,topology subnet,ping 10,ping-restart 60,ifconfig 192.168.6.2 255.255.255.0' The interesting part for us is the route command which I highlighted already in the sample PUSH_REPLY. Depending on your remote server there might be multiple networks defined (172.16.x.x and/or 10.x.x.x). Important: The IP address range on both sides of the connection has to be different, otherwise you will have to shuffle IPs or increase your the netmask. {loadposition content_adsense} After the VPN connection is established, we have to extend the rules for iptables in order to route and masquerade IP packets properly. I created a shell script to take care of those steps: #!/bin/sh -eIPTABLES=/sbin/iptablesDEV_LAN=eth0DEV_VPNS=tun+VPN=192.168.1.0/24 $IPTABLES -A FORWARD -i $DEV_LAN -o $DEV_VPNS -d $VPN -j ACCEPT$IPTABLES -A FORWARD -i $DEV_VPNS -o $DEV_LAN -s $VPN -j ACCEPT$IPTABLES -t nat -A POSTROUTING -o $DEV_VPNS -d $VPN -j MASQUERADE I'm using the wildcard interface 'tun+' because I have multiple client configurations for OpenVPN on my server. In your case, it might be sufficient to specify device 'tun0' only. Simplifying your life - automatic connect on boot Now, that the client connection works flawless, configuration of routing and iptables is okay, we might consider to add another 'laziness' factor into our setup. Due to kernel updates or other circumstances it might be necessary to reboot your system. Wouldn't it be nice that the VPN connections are established during the boot procedure? Yes, of course it would be. To achieve this, we have to configure OpenVPN to automatically start our VPNs via init script. Let's have a look at the responsible 'default' file and adjust the settings accordingly. $ sudo nano /etc/default/openvpn Which should have a similar content to this: # This is the configuration file for /etc/init.d/openvpn## Start only these VPNs automatically via init script.# Allowed values are "all", "none" or space separated list of# names of the VPNs. If empty, "all" is assumed.# The VPN name refers to the VPN configutation file name.# i.e. "home" would be /etc/openvpn/home.conf#AUTOSTART="all"#AUTOSTART="none"#AUTOSTART="home office"## ... more information which remains unmodified ... With the OpenVPN client configuration as described above you would either set AUTOSTART to "all" or to "client" to enable automatic start of your VPN(s) during boot. You should also take care that your iptables commands are executed after the link has been established, too. You can easily test this configuration without reboot, like so: $ sudo service openvpn restart Enjoy stable VPN connections between your Linux system(s) and a WatchGuard Firebox SSL remote server. Cheers, JoKi

  Read the article

• Customize the Windows Media Center Start Menu with Media Center Studio

  - by DigitalGeekery

  Do you ever wish you could change the WMC start menu? Maybe move some of the tiles and strips around to different locations, add new ones, or eliminate some altogether? Today we look at how to do it using Media Center Studio. Download and install Media Center Studio. (Download link below) You’ll also want to make sure you have Windows Media Center closed before running Media Center Studio. Many of the actions cannot be performed with Media Center open. Once installed, you can open Media Center Studio from the Windows Start Menu. When you first open Media Center Studio you’ll be on the Themes tab. Click on the Start Menu tab. It should be noted that Media Center Studio is a Beta application, and it did crash on us a few times, so it’s a good idea to save your work frequently. You can save your changes by selecting Save on the Home tab, or by clicking the small disk icon at the top left. We also found that that trying to launch Media Center from the Start Media Center button on the application ribbon typically didn’t work. Opening Windows Media Center from the Windows Start Menu is preferred.   When you’re on the Start Menu tab you will see the Windows Media Center menu strips and tiles. Click the arrows located at the right, left, top, and bottom of the screen to scroll through the various menu strips.   Hiding and Removing Tiles and Menu Strips. If there is an entire menu strip that you never use and would like to remove from Media Center, simply uncheck the box to the left of the the title above that menu strip. If you’d like to hide individual tiles, uncheck the box next to the name of the individual tile. Renaming Tiles and Strips To rename a tile or menu strip, click on the small notepad icon next to the title. Note: If you do not see a small notepad icon next to the title, then the title is not editable. This applies to many of the “Promo” tiles. The title will turn into a text input box so that you can edit the name. Click away from the text box when finished. Here we will change the title of the default Movie strip to “Flicks.” Change the Default Tile and Menu Strip The Default menu strip is the strip that is highlighted, or on focus, when you open Media Center.   To change the default strip, simply click once on another strip to highlight it, and then save your work. In our example, I’m going to make our newly renamed “Flicks” strip the default.   Each menu strip has a default tile. This is the tile that is active, or on focus, when you select the menu strip. To change the default tile on a strip, click once on the tile. You will see it outlined in light blue. Now just simply save your changes. In our example below, we’ve changed the default tile on the TV strip to “guide.”   Moving Tiles and Menu Strips You can move an entire Menu Strip up or down on the screen. When you hover your mouse over the a menu strip, you will see up and down arrows appear to the right and left of the title. Click on the arrows to move the strip up or down.   You will see the menu strip appear in it’s new position.   To move a tile to a new menu strip, click and drag the tile you’d like to move. When you begin to drag the tile, green plus (+) signs will appear in between the tiles. Drag and drop the tile onto to any of these green plus signs to move it to that location. When you’ve dragged the tile over an acceptable position, you’ll see the  red “Move” label next to your cursor turn to a blue “Move to” label. Now you can drop the tile into position. You’ll see the tile located in it’s new position.   Adding a New Custom Menu Strip Click on the Start Menu tab and then select the Menu Strip button.   You will see a new Custom Menu strip appear on your Start Menu with the default name of Custom menu. You can change the name by clicking on the notepad icon just as we did earlier. For our example, we’ll change the name of the new strip to Add-ins. To add a new tile, click on Entry Points at the lower left of the application window. This will reveal all of your available Entry Points that can be added to the Media Center Menu. You should see the built-in Media Center Games and any Media Center Plug-ins you have added to your system. You can then drag and drop any of the Entry Points onto any of the Menu Strips. Below we’ve added Media Browser to our custom Add-ins menu strip. You can also add additional applications to launch directly from Media Center. Click on the Application button on the Start Menu tab. Note: Many applications may not work with your remote, but with keyboard and mouse only.    Type in a title which will appear under the tile in Media Center, and then type the path to the application. In our example, we will add Internet Explorer 8. Note: Be sure to add the actual path to the application and not just a link on the desktop. Click any of the check boxes to select any options under Required Capabilities. You can also browse to choose an image if you don’t care for the image that appears automatically.   Next, you can select keyboard strokes to press to exit the application and return to Media Center. Click the green plus (+) button. When prompted, press a key you’ll use to close the program. Repeat the process if you’d also like to select a keystroke to kill the program.   You’ll see your button programs listed below. When you’re finished, save your work and close out of Media Center Studio.   Now your new program entry point will appear in the Entry Points section. Drag the icon to the desired position on the Start Menu and save again before exiting Media Center Studio. When you open Media Center you will see your new application on the start menu. Click the tile to open the application just as you would any other tile. The application will open and minimize Media Center. When you press the key you choose to close the program, Windows Media Center will automatically be restored. Note: You can also exit the application through normal methods by clicking the red “X” or File > Exit. Conclusion Media Center Studio is a Beta application which the developer freely admits still has some bugs. Despite it’s flaws Media Center Studio is a powerful tool, and when it comes to customizing your Media Center start menu, it’s pretty much the only game in town. It works with both Vista and Windows 7, and according to the developer, has not been officially tested with extenders. Media Center Studio can also be used to add custom themes to Windows 7 Media Center and we’ll be covering that in a future article. Looking for more ways to customize your Media Center experience? Be sure to check out our earlier posts on Media Browser, as well as how to add Hulu, Boxee, and weather conditions your Windows 7 Media Center. Download Media Center Studio Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)How To Rip a Music CD in Windows 7 Media CenterSchedule Updates for Windows Media CenterStartup Customizations for Media Center in Windows 7Automatically Start Windows 7 Media Center in Live TV Mode TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Video Toolbox is a Superb Online Video Editor Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall

  Read the article

• CodePlex Daily Summary for Wednesday, December 08, 2010

  CodePlex Daily Summary for Wednesday, December 08, 2010Popular ReleasesAlgorithmia: Algorithmia 1.1: Algorithmia v1.1, released on December 8th, 2010.SubtitleTools: SubtitleTools 1.1: Added a better ToUTF-8 converter (not just from windows-1256 to utf-8). Refactored OpenFileDialogs to a more MVVM friendly behavior.SuperSocket, an extensible socket application framework: SuperSocket 1.0 SP1: Fixed bugs: fixed a potential bug that the running state hadn't been updated after socket server stopped fixed a synchronization issue when clearing timeout session fixed a bug in ArraySegmentList fixed a bug on getting configuration valueHydroDesktop - CUAHSI Hydrologic Information System Desktop Application: 1.1.340: HydroDesktop 1.1 Stable Release (Build 340)CslaGenFork: CslaGenFork 4.0 CTP 2: The version is 4.0.1 CTP2 and was released 2010 December 7 and includes the following files: CslaGenFork 4.0.1-2010-12-07 Setup.msi Templates-2010-10-07.zip For getting started instructions, refer to How to section. Overview of the changes Since CTP1 there were 53 work items closed (28 features, 24 issues and 1 task). During this 60 days a lot of work has been done on several areas. First the stereotypes: EditableRoot is OK EditableChild is OK EditableRootCollection is OK Editable...My Web Pages Starter Kit: 1.3.1 Production Release (Security HOTFIX): Due to a critical security issue, it's strongly advised to update the My Web Pages Starter Kit to this version. Possible attackers could misuse the image upload to transmit any type of file to the website. If you already have a running version of My Web Pages Starter Kit 1.3.0, you can just replace the ftb.imagegallery.aspx file in the root directory with the one attached to this release.EnhSim: EnhSim 2.2.0 ALPHA: 2.2.0 ALPHAThis release adds in the changes for 4.03a. at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Updated En...ASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.4: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager new stuff: popup WhiteSpaceFilterAttribute tested on mozilla, safari, chrome, opera, ie 9b/8/7/6nopCommerce. ASP.NET open source shopping cart: nopCommerce 1.90: To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).TweetSharp: TweetSharp v2.0.0.0 - Preview 4: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 4 ChangesReintroduced fluent interface support via satellite assembly Added entities support, entity segmentation, and ITweetable/ITweeter interfaces for client development Numerous fixes reported by preview users Preview 3 ChangesNumerous fixes and improvements to core engine Twitter API coverage: a...myCollections: Version 1.2: New in version 1.2: Big performance improvement. New Design (Added Outlook style View, New detail view, New Groub By...) Added Sort by Media Added Manage Movie Studio Zoom preference is now saved. Media name are now editable. Added Portuguese version You can now Hide details panel Add support for FLAC tags You can now imports books from BibTex Xml file BugFixingmytrip.mvc (CMS & e-Commerce): mytrip.mvc 1.0.49.0 beta: mytrip.mvc 1.0.49.0 beta web Web for install hosting System Requirements: NET 4.0, MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) mytrip.mvc 1.0.49.0 beta src System Requirements: Visual Studio 2010 or Web Deweloper 2010 MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) Connector/Net 6.3.4, MVC3 RC WARNING For run and debug mytrip.mvc 1.0.49.0 beta src download and ...MiniTwitter: 1.62: MiniTwitter 1.62 ???? ?? ??????????????????????????????????????? 140 ?????????????????????????? ???????????????????????????????? ?? ??????????????????????????????????Phalanger - The PHP Language Compiler for the .NET Framework: 2.0 (December 2010): The release is targetted for stable daily use. With improved performance and enhanced compatibility with several latest PHP open source applications; it makes this release perfect replacement of your old PHP runtime. Changes made within this release include following and much more: Performance improvements based on real-world applications experience. We determined biggest bottlenecks and we found and removed overheads causing performance problems in many PHP applications. Reimplemented nat...Chronos WPF: Chronos v2.0 Beta 3: Release notes: Updated introduction document. Updated Visual Studio 2010 Extension (vsix) package. Added horizontal scrolling to the main window TaskBar. Added new styles for ListView, ListViewItem, GridViewColumnHeader, ... Added a new WindowViewModel class (allowing to fetch data). Added a new Navigate method (with several overloads) to the NavigationViewModel class (protected). Reimplemented Task usage for the WorkspaceViewModel.OnDelete method. Removed the reflection effect...MDownloader: MDownloader-0.15.26.7024: Fixed updater; Fixed MegauploadDJ - jQuery WebControls for ASP.NET: DJ 1.2: What is new? Update to support jQuery 1.4.2 Update to support jQuery ui 1.8.6 Update to Visual Studio 2010 New WebControls with samples added Autocomplete WebControl Button WebControl ToggleButt WebControl The example web site is including in source code project.LateBindingApi.Excel: LateBindingApi.Excel Release 0.7g: Unterschiede zur Vorgängerversion: - Zusätzliche Interior Properties - Group / Ungroup Methoden für Range - Bugfix COM Reference Handling für Application Objekt in einigen Klassen Release+Samples V0.7g: - Enthält Laufzeit DLL und Beispielprojekte Beispielprojekte: COMAddinExample - Demonstriert ein versionslos angebundenes COMAddin Example01 - Background Colors und Borders für Cells Example02 - Font Attributes undAlignment für Cells Example03 - Numberformats Example04 - Shapes, WordArts, P...ESRI ArcGIS Silverlight Toolkit: November 2010 - v2.1: ESRI ArcGIS Silverlight Toolkit v2.1 Added Windows Phone 7 build. New controls added: InfoWindow ChildPage (Windows Phone 7 only) See what's new here full details for : http://help.arcgis.com/en/webapi/silverlight/help/#/What_s_new_in_2_1/016600000025000000/ Note: Requires Visual Studio 2010, .NET 4.0 and Silverlight 4.0.ASP .NET MVC CMS (Content Management System): Atomic CMS 2.1.1: Atomic CMS 2.1.1 release notes Atomic CMS installation guide New ProjectsCore Motives Tracking Web Part: This C# web part was created to allow users of SharePoint 2007 to place CoreMotives (http://www.coremotives.com) tracking code on any web part page. Can also be used in master pages and page layouts.CPEBook: OsefEatFrsh: Keep Track of contents of your Fridge. Eat items while they are still fresh.ENUH10Publisher: Et prosjekt for studenter ved eCademy H10EVE Community Portal: EVE Community Portal is a complete community portal for EVE alliances (and corporations), which will host everything an eve alliance needs, from a forum and blogs to every tool you could whish for and more...FER CSLA.NET Compact: .NET Compact Framework edition of CSLA.NET application framework.Finger Mouse: it's a good idea and simple program help you to use the mouse feature from webcam (without mouse) note : you should have i3 or higher processorGambaru: Gambaru é um techdemo de um game 3D desenvolvido em Delphi. Utiliza engine de física Newton e Open GL (pacote GL-Scene). Foi apresentado como trabalho de conclusão de curso no SENAC-SP por Marcelo, Daniel e Thais em 2007. Exploramos o universo Samurai. Contribua, programe, sonhe!GameBoyEmu: ????，GameBoy ???GenericList Inherits IDataReader ( ListEx<T>() : IDataReader ): This Generic List implements the IDataReader interface and displays the usage of Linq, Lamba expressions and some creative thought around working with collection types. I hope it can serve as reference to your projects.Guard: Provides the argument validation class Guard, ubiquitously used throughout all .NET projects but with no central place for updates.HolidayChecker Library: HolidayChecker Library is a usefull library that allows programmers to know if a certain date is a festivity or not. This library also allows the calculation of Easter day based on the algorithm of Tondering. It's developed in C#.JuniorTour - Junior Golf Tour Silverlight Application: JuniorTour makes it easier for golf tour operators to publish tournament results for multiple divisions and multiple seasons. You'll no longer have to manually edit player pages, tournament results, or compute rankings. It's developed in C# and Silverlight.LibGT: LibGT aims to reduce the amount of overall code a programmer has to write in C#. This library provides many shortcuts and extension methods to facilitate robust development rapidly even without the use of an IDE.Mayhem: Mayhem makes it simple for end users to control complex events with their PCs. Whether you want to Update a Twitter status when your cat is detected by your webcam or monitor your serial ports and trigger events, it's no problem with Mayhem -- wreak your own personal havoc.mmht: ???????，??????MobilePolice: my mobilepolice projectOpenCallback: This is a implementation of the callback handler pattern that allows you to invoke the callback handle methods with out type switching or if...else if chains.Project Baron: Simple, yet powerful Project Management System.PS3Lib for SDK 1.92: Création d'une librairie de ceveloppement pour le SDK 1.92Remote Controller for Trackmania: Evzrecon is a remote controller for Trackmania Forever dedicated servers, much like XASECO but written in Java.SharePointSocial: SharePointSocial is focused on taking social interaction within SharePoint to the next level, extending beyond the corporate boundaries. Corporate listening, one-click interaction through key social media outlets and data-driven management and reporting are planned features.SIGS: ssSimple Routing: Simple Routing allows you to associate arbitrary routes with static methods in an ASP.NET application through attribution.SlimCRM: Aplicación de referencia de buenas prácticas de programaciónTalkBoard: ????????，?????????！uHelpsy - Umbraco Helper Library: uHelpsy is a tiny (but growing) library which makes programatically interacting with Umbraco 4.5.2 much more pleasant. It provides helper methods for creating and updating nodes, working with the Umbraco cache, and dealing with unpublished nodes. VCSS: VCSS is a decorated version of CSS (Cascading Style Sheets) that allows you to specify variables and also nest rules. The VCSS file can be compiled into a standard CSS file to be used on any website.Vote: ?，???????????????！WP7 GPS Simulator: Use this project to simulate GPS while doing development on your Windows Phone 7.WPF_CAD: this proyect it's a college proyect form grafic computer course. Consist in the development of a cad soft implementing all grafics algoritms.Xml-Racing: Réaliser une application Web 3-tiers qui permette d'interroger une BD et de restituer les infos sous forme de graphiques et cartes.

  Read the article

• Option Trading: Getting the most out of the event session options

  - by extended_events

  You can control different aspects of how an event session behaves by setting the event session options as part of the CREATE EVENT SESSION DDL. The default settings for the event session options are designed to handle most of the common event collection situations so I generally recommend that you just use the defaults. Like everything in the real world though, there are going to be a handful of “special cases” that require something different. This post focuses on identifying the special cases and the correct use of the options to accommodate those cases. There is a reason it’s called Default The default session options specify a total event buffer size of 4 MB with a 30 second latency. Translating this into human terms; this means that our default behavior is that the system will start processing events from the event buffer when we reach about 1.3 MB of events or after 30 seconds, which ever comes first. Aside: What’s up with the 1.3 MB, I thought you said the buffer was 4 MB?The Extended Events engine takes the total buffer size specified by MAX_MEMORY (4MB by default) and divides it into 3 equally sized buffers. This is done so that a session can be publishing events to one buffer while other buffers are being processed. There are always at least three buffers; how to get more than three is covered later. Using this configuration, the Extended Events engine can “keep up” with most event sessions on standard workloads. Why is this? The fact is that most events are small, really small; on the order of a couple hundred bytes. Even when you start considering events that carry dynamically sized data (eg. binary, text, etc.) or adding actions that collect additional data, the total size of the event is still likely to be pretty small. This means that each buffer can likely hold thousands of events before it has to be processed. When the event buffers are finally processed there is an economy of scale achieved since most targets support bulk processing of the events so they are processed at the buffer level rather than the individual event level. When all this is working together it’s more likely that a full buffer will be processed and put back into the ready queue before the remaining buffers (remember, there are at least three) are full. I know what you’re going to say: “My server is exceptional! My workload is so massive it defies categorization!” OK, maybe you weren’t going to say that exactly, but you were probably thinking it. The point is that there are situations that won’t be covered by the Default, but that’s a good place to start and this post assumes you’ve started there so that you have something to look at in order to determine if you do have a special case that needs different settings. So let’s get to the special cases… What event just fired?! How about now?! Now?! If you believe the commercial adage from Heinz Ketchup (Heinz Slow Good Ketchup ad on You Tube), some things are worth the wait. This is not a belief held by most DBAs, particularly DBAs who are looking for an answer to a troubleshooting question fast. If you’re one of these anxious DBAs, or maybe just a Program Manager doing a demo, then 30 seconds might be longer than you’re comfortable waiting. If you find yourself in this situation then consider changing the MAX_DISPATCH_LATENCY option for your event session. This option will force the event buffers to be processed based on your time schedule. This option only makes sense for the asynchronous targets since those are the ones where we allow events to build up in the event buffer – if you’re using one of the synchronous targets this option isn’t relevant. Avoid forgotten events by increasing your memory Have you ever had one of those days where you keep forgetting things? That can happen in Extended Events too; we call it dropped events. In order to optimizes for server performance and help ensure that the Extended Events doesn’t block the server if to drop events that can’t be published to a buffer because the buffer is full. You can determine if events are being dropped from a session by querying the dm_xe_sessions DMV and looking at the dropped_event_count field. Aside: Should you care if you’re dropping events?Maybe not – think about why you’re collecting data in the first place and whether you’re really going to miss a few dropped events. For example, if you’re collecting query duration stats over thousands of executions of a query it won’t make a huge difference to miss a couple executions. Use your best judgment. If you find that your session is dropping events it means that the event buffer is not large enough to handle the volume of events that are being published. There are two ways to address this problem. First, you could collect fewer events – examine you session to see if you are over collecting. Do you need all the actions you’ve specified? Could you apply a predicate to be more specific about when you fire the event? Assuming the session is defined correctly, the next option is to change the MAX_MEMORY option to a larger number. Picking the right event buffer size might take some trial and error, but a good place to start is with the number of dropped events compared to the number you’ve collected. Aside: There are three different behaviors for dropping events that you specify using the EVENT_RETENTION_MODE option. The default is to allow single event loss and you should stick with this setting since it is the best choice for keeping the impact on server performance low.You’ll be tempted to use the setting to not lose any events (NO_EVENT_LOSS) – resist this urge since it can result in blocking on the server. If you’re worried that you’re losing events you should be increasing your event buffer memory as described in this section. Some events are too big to fail A less common reason for dropping an event is when an event is so large that it can’t fit into the event buffer. Even though most events are going to be small, you might find a condition that occasionally generates a very large event. You can determine if your session is dropping large events by looking at the dm_xe_sessions DMV once again, this time check the largest_event_dropped_size. If this value is larger than the size of your event buffer [remember, the size of your event buffer, by default, is max_memory / 3] then you need a large event buffer. To specify a large event buffer you set the MAX_EVENT_SIZE option to a value large enough to fit the largest event dropped based on data from the DMV. When you set this option the Extended Events engine will create two buffers of this size to accommodate these large events. As an added bonus (no extra charge) the large event buffer will also be used to store normal events in the cases where the normal event buffers are all full and waiting to be processed. (Note: This is just a side-effect, not the intended use. If you’re dropping many normal events then you should increase your normal event buffer size.) Partitioning: moving your events to a sub-division Earlier I alluded to the fact that you can configure your event session to use more than the standard three event buffers – this is called partitioning and is controlled by the MEMORY_PARTITION_MODE option. The result of setting this option is fairly easy to explain, but knowing when to use it is a bit more art than science. First the science… You can configure partitioning in three ways: None, Per NUMA Node & Per CPU. This specifies the location where sets of event buffers are created with fairly obvious implication. There are rules we follow for sub-dividing the total memory (specified by MAX_MEMORY) between all the event buffers that are specific to the mode used: None: 3 buffers (fixed)Node: 3 * number_of_nodesCPU: 2.5 * number_of_cpus Here are some examples of what this means for different Node/CPU counts: Configuration None Node CPU 2 CPUs, 1 Node 3 buffers 3 buffers 5 buffers 6 CPUs, 2 Node 3 buffers 6 buffers 15 buffers 40 CPUs, 5 Nodes 3 buffers 15 buffers 100 buffers   Aside: Buffer size on multi-processor computersAs the number of Nodes or CPUs increases, the size of the event buffer gets smaller because the total memory is sub-divided into more pieces. The defaults will hold up to this for a while since each buffer set is holding events only from the Node or CPU that it is associated with, but at some point the buffers will get too small and you’ll either see events being dropped or you’ll get an error when you create your session because you’re below the minimum buffer size. Increase the MAX_MEMORY setting to an appropriate number for the configuration. The most likely reason to start partitioning is going to be related to performance. If you notice that running an event session is impacting the performance of your server beyond a reasonably expected level [Yes, there is a reasonably expected level of work required to collect events.] then partitioning might be an answer. Before you partition you might want to check a few other things: Is your event retention set to NO_EVENT_LOSS and causing blocking? (I told you not to do this.) Consider changing your event loss mode or increasing memory. Are you over collecting and causing more work than necessary? Consider adding predicates to events or removing unnecessary events and actions from your session. Are you writing the file target to the same slow disk that you use for TempDB and your other high activity databases? <kidding> <not really> It’s always worth considering the end to end picture – if you’re writing events to a file you can be impacted by I/O, network; all the usual stuff. Assuming you’ve ruled out the obvious (and not so obvious) issues, there are performance conditions that will be addressed by partitioning. For example, it’s possible to have a successful event session (eg. no dropped events) but still see a performance impact because you have many CPUs all attempting to write to the same free buffer and having to wait in line to finish their work. This is a case where partitioning would relieve the contention between the different CPUs and likely reduce the performance impact cause by the event session. There is no DMV you can check to find these conditions – sorry – that’s where the art comes in. This is  largely a matter of experimentation. On the bright side you probably won’t need to to worry about this level of detail all that often. The performance impact of Extended Events is significantly lower than what you may be used to with SQL Trace. You will likely only care about the impact if you are trying to set up a long running event session that will be part of your everyday workload – sessions used for short term troubleshooting will likely fall into the “reasonably expected impact” category. Hey buddy – I think you forgot something OK, there are two options I didn’t cover: STARTUP_STATE & TRACK_CAUSALITY. If you want your event sessions to start automatically when the server starts, set the STARTUP_STATE option to ON. (Now there is only one option I didn’t cover.) I’m going to leave causality for another post since it’s not really related to session behavior, it’s more about event analysis. - Mike Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Mr Flibble: As Seen Through a Lens, Darkly

  - by Phil Factor

  One of the rewarding things about getting involved with Simple-Talk has been in meeting and working with some pretty daunting talents. I’d like to say that Dom Reed’s talents are at the end of the visible spectrum, but then there is Richard, who pops up on national radio occasionally, presenting intellectual programs, Andrew, master of the ukulele, with his pioneering local history work, and Tony with marathon running and his past as a university lecturer. However, Dom, who is Red Gate’s head of creative design and who did the preliminary design work for Simple-Talk, has taken the art photography to an extreme that was impossible before Photoshop. He’s not the first person to take a photograph of himself every day for two years, but he is definitely the first to weave the results into a frightening narrative that veers from comedy to pathos, using all the arts of Photoshop to create a fictional character, Mr Flibble.   Have a look at some of the Flickr pages. Uncle Spike The B-Men – Woolverine The 2011 BoyZ iN Sink reunion tour turned out to be their last Error 404 – Flibble not found Mr Flibble is not a normal type of alter-ego. We generally prefer to choose bronze age warriors of impossibly magnificent physique and stamina; superheroes who bestride the world, scorning the forces of evil and anarchy in a series noble and righteous quests. Not so Dom, whose Mr Flibble is vulnerable, and laid low by an addiction to toxic substances. His work has gained an international cult following and is used as course material by several courses in photography. Although his work was for a while ignored by the more conventional world of ‘art’ photography they became famous through the internet. His photos have received well over a million views on Flickr. It was definitely time to turn this work into a book, because the whole sequence of images has its maximum effect when seen in sequence. He has a Kickstarter project page, one of the first following the recent UK launch of the crowdfunding platform. The publication of the book should be a major event and the £45 I shall divvy up will be one of the securest investments I shall ever make. The local news in Cambridge picked up on the project and I can quote from the report by the excellent Cabume website , the source of Tech news from the ‘Cambridge cluster’ Put really simply Mr Flibble likes to dress up and take pictures of himself. One of the benefits of a split personality, however is that Mr Flibble is supported in his endeavour by Reed’s top notch photography skills, supreme mastery of Photoshop and unflinching dedication to the cause. The duo have collaborated to take a picture every day for the past 730-plus days. It is not a big surprise that neither Mr Flibble nor Reed watches any TV: In addition to his full-time role at Cambridge software house,Red Gate Software as head of creativity and the two to five hours a day he spends taking the Mr Flibble shots, Reed also helps organise the . And now Reed is using Kickstarter to see if the world is ready for a Mr Flibble coffee table book. Judging by the early response it is. At the time of writing, just a few days after it went live, ‘I Drink Lead Paint: An absurd photography book by Mr Flibble’ had raised £1,545 of the £10,000 target it needs to raise by the Friday 30 November deadline from 37 backers. Following the standard Kickstarter template, Reed is offering a series of rewards based on the amount pledged, ranging from a Mr Flibble desktop wallpaper for pledges of £5 or more to a signed copy of the book for pledges of £45 or more, right up to a starring role in the book for £1,500. Mr Flibble is unquestionably one of the more deranged Kickstarter hopefuls, but don’t think for a second that he doesn’t have a firm grasp on the challenges he faces on the road to immortalisation on 150 gsm stock. Under the section ‘risks and challenges’ on his Kickstarter page his statement begins: “An angry horde of telepathic iguanas discover the world’s last remaining stock of vintage lead paint and hold me to ransom. Gosh how I love to guzzle lead paint. Anyway… faced with such brazen bravado, I cower at the thought of taking on their combined might and die a sad and lonely Flibble deprived of my one and only true liquid love.” At which point, Reed manages to wrestle away the keyboard, giving him the opportunity to present slightly more cogent analysis of the obstacles the project must still overcome. We asked Reed a few questions about Mr Flibble’s Kickstarter adventure and felt that his responses were worth publishing in full: Firstly, how did you manage it – holding down a full time job and also conceiving and executing these ideas on a daily basis? I employed a small team of ferocious gerbils to feed me ideas on a daily basis. Whilst most of their ideas were incomprehensibly rubbish and usually revolved around food, just occasionally they’d give me an idea like my B-Men series. As a backup plan though, I found that the best way to generate ideas was to actually start taking photos. If I were to stand in front of the camera, pull a silly face, place a vegetable on my head or something else equally stupid, the resulting photo of that would typically spark an idea when I came to look at it. Sitting around idly trying to think of an idea was doomed to result in no ideas. I admit that I really struggled with time. I’m proud that I never missed a day, but it was definitely hard when you were late from work, tired or doing something socially on the same day. I don’t watch TV, which I guess really helps, because I’d frequently be spending 2-5 hours taking and processing the photos every day. Are there any overlaps between software development and creative thinking? Software is an inherently creative business and the speed that it moves ensures you always have to find solutions to new things. Everyone in the team needs to be a problem solver. Has it helped me specifically with my photography? Probably. Working within teams that continually need to figure out new stuff keeps the brain feisty I suppose, and I guess I’m continually exposed to a lot of possible sources of inspiration. How specifically will this Kickstarter project allow you to test the commercial appeal of your work and do you plan to get the book into shops? It’s taken a while to be confident saying it, but I know that people like the work that I do. I’ve had well over a million views of my pictures, many humbling comments and I know I’ve garnered some loyal fans out there who anticipate my next photo. For me, this Kickstarter is about seeing if there’s worth to my work beyond just making people smile. In an online world where there’s an abundance of freely available content, can you hope to receive anything from what you do, or would people just move onto the next piece of content if you happen to ask for some support? A book has been the single-most requested thing that people have asked me to produce and it’s something that I feel would showcase my work well. It’s just hard to convince people in the publishing industry just now to take any kind of risk – they’ve been hit hard. If I can show that people would like my work enough to buy a book, then it sends a pretty clear picture that publishers might hear, or it gives me the confidence enough to invest in myself a bit more – hard to do when you’re riddled with self-doubt! I’d love to see my work in the shops, yes. I could see it being the thing that someone flips through idly as they’re Christmas shopping and recognizing that it’d be just the perfect gift for their difficult to buy for friend or relative. That said, working in the software industry means I’m clearly aware of how I could use technology to distribute my work, but I can’t deny that there’s something very appealing to having a physical thing to hold in your hands. If the project is successful is there a chance that it could become a full-time job? At the moment that seems like a distant dream, as should this be successful, there are many more steps I’d need to take to reach any kind of business viability. Kickstarter seems exactly that – a way for people to help kick start me into something that could take off. If people like my work and want me to succeed with it, then taking a look at my Kickstarter page (and hopefully pledging a bit of support) would make my elbows blush considerably. So there is is. An opportunity to open the wallet just a bit to ensure that one of the more unusual talents sees the light in the format it deserves.  

  Read the article

• Queued Loadtest to remove Concurrency issues using Shared Data Service in OpenScript

  - by stefan.thieme(at)oracle.com

  Queued Processing to remove Concurrency issues in Loadtest ScriptsSome scripts act on information returned by the server, e.g. act on first item in the returned list of pending tasks/actions. This may lead to concurrency issues if the virtual users simulated in a load test scenario are not synchronized in some way.As the load test cases should be carried out in a comparable and straight forward manner simply cancel a transaction in case a collision occurs is clearly not an option. In case you increase the number of virtual users this approach would lead to a high number of requests for the early steps in your transaction (e.g. login, retrieve list of action points, assign an action point to the virtual user) but later steps would be rarely visited successfully or at all, depending on the application logic.A way to tackle this problem is to enqueue the virtual users in a Shared Data Service queue. Only the first virtual user in this queue will be allowed to carry out the critical steps (retrieve list of action points, assign an action point to the virtual user) in your transaction at any one time.Once a virtual user has passed the critical path it will dequeue himself from the head of the queue and continue with his actions. This does theoretically allow virtual users to run in parallel all steps of the transaction which are not part of the critical path.In practice it has been seen this is rarely the case, though it does not allow adding more than N users to perform a transaction without causing delays due to virtual users waiting in the queue. N being the time of the total transaction divided by the sum of the time of all critical steps in this transaction.While this problem can be circumvented by allowing multiple queues to act on individual segments of the list of actions, e.g. per country filter, ends with 0..9 filter, etc.This would require additional handling of these additional queues of slots for the virtual users at the head of the queue in order to maintain the mutually exclusive access to the first element in the list returned by the server at any one time of the load test. Such an improved handling of multiple queues and/or multiple slots is above the subject of this paper.Shared Data Services Pre-RequisitesStart WebLogic Server to host Shared Data ServicesYou will have to make sure that your WebLogic server is installed and started. Shared Data Services may not work if you installed only the minimal installation package for OpenScript. If however you installed the default package including OLT and OTM, you may follow the instructions below to start and verify WebLogic installation.To start the WebLogic Server deployed underneath of Oracle Load Testing and/or Oracle Test Manager you can go to your Start menu, Oracle Application Testing Suite and select the Restart Oracle Application Testing Suite Application Service entry from the Tools submenu.To verify the service has been started you can run the Microsoft Management Console for Services by Selecting Run from the Start Menu and entering services.msc. Look for the entry that reads Oracle Application Testing Suite Application Service, once it has changed it status from Starting to Started you can proceed to verify the login. Please note that this may take several minutes, I would say up to 10 minutes depending on the strength of your CPU horse-power.Verify WebLogic Server user credentialsYou will have to make sure that your WebLogic Server is installed and started. Next open the Oracle WebLogic Server Adminstration Console on http://localhost:8088/console.It may take a while until the application is deployed and started. It may display the following until the Administration Console has been deployed on the fly.Afterwards you can login using the username oats and the password that you selected during install time for your Application Testing Suite administrative purposes.This will bring up the Home page of you WebLogic Server. You have actually verified that you are able to login with these credentials already. However if you want to check the details, navigate to Security Realms, myrealm, Users and Groups tab.Here you could add users to your WebLogic Server which could be used in the later steps. Details on the Groups required for such a custom user to work are exceeding this quick overview and have to be selected with the WebLogic Server Adminstration Guide in mind.Shared Data Services pre-requisites for Load testingOpenScript Preferences have to be set to enable Encryption and provide a default Shared Data Service Connection for Playback.These are pre-requisites you want to use for load testing with Shared Data Services.Please note that the usage of the Connection Parameters (individual directive in the script) for Shared Data Services did not playback reliably in the current version 9.20.0370 of Oracle Load Testing (OLT) and encryption of credentials still seemed to be mandatory as well.General Encryption settingsSelect OpenScript Preferences from the View menu and navigate to the General, Encryption entry in the tree on the left. Select the Encrypt script data option from the list and enter the same password that you used for securing your WebLogic Server Administration Console.Enable global shared data access credentialsSelect OpenScript Preferences from the View menu and navigate to the Playback, Shared Data entry in the tree on the left. Enable the global shared data access credentials and enter the Address, User name and Password determined for your WebLogic Server to host Shared Data Services.Please note, that you may want to replace the localhost in Address with the hosts realname in case you plan to run load tests with Loadtest Agents running on remote systems.Queued Processing of TransactionsEnable Shared Data Services Module in Script PropertiesThe Shared Data Services Module has to be enabled for each Script that wants to employ the Shared Data Service Queue functionality in OpenScript. It can be enabled under the Script menu selecting Script Properties. On the Script Properties Dialog select the Modules section and check Shared Data to enable Shared Data Service Module for your script. Checking the Shared Data Services option will effectively add a line to your script code that adds the sharedData ScriptService to your script class of IteratingVUserScript.@ScriptService oracle.oats.scripting.modules.sharedData.api.SharedDataService sharedData;Record your scriptRecord your script as usual and then add the following things for Queue handling in the Initialize code block, before the first step and after the last step of your critical path and in the Finalize code block.The java code to be added at individual locations is explained in the following sections in full detail.Create a Shared Data Queue in InitializeTo create a Shared Data Queue go to the Java view of your script and enter the following statements to the initialize() code block.info("Create queueA with life time of 120 minutes");sharedData.createQueue("queueA", 120);This will create an instantiation of the Shared Data Queue object named queueA which is maintained for upto 120 minutes.If you want to use the code for multiple scripts, make sure to use a different queue name for each one here and in the subsequent steps. You may even consider to use a dynamic queueName based on filters of your result list being concurrently accessed.Prepare a unique id for each IterationIn order to keep track of individual virtual users in our queue we need to create a unique identifier from the virtual user id and the used username right after retrieving the next record from our databank file.getDatabank("Usernames").getNextDatabankRecord();getVariables().set("usernameValue1","VU_{{@vuid}}_{{@iterationnum}}_{{db.Usernames.Username}}_{{@timestamp}}_{{@random(10000)}}");String usernameValue = getVariables().get("usernameValue1");info("Now running virtual user " + usernameValue);As you can see from the above code block, we have set the OpenScript variable usernameValue1 to VU_{{@vuid}}_{{@iterationnum}}_{{db.Usernames.Username}}_{{@timestamp}}_{{@random(10000)}} which is a concatenation of the virtual user id and the iterationnumber for general uniqueness; as well as the username from our databank, the timestamp and a random number for making it further unique and ease spotting of errors.Not all of these fields are actually required to make it really unique, but adding the queue name may also be considered to help troubleshoot multiple queues.The value is then retrieved with the getVariables.get() method call and assigned to the usernameValue String used throughout the script.Please note that moving the getDatabank("Usernames").getNextDatabankRecord(); call to the initialize block was later considered to remove concurrency of multiple virtual users running with the same userid and therefor accessing the same "My Inbox" in step 6. This will effectively give each virtual user a userid from the databank file. Make sure you have enough userids to remove this second hurdle.Enqueue and attend Queue before Critical PathTo maintain the right order of virtual users being allowed into the critical path of the transaction the following pseudo step has to be added in front of the first critical step. In the case of this example this is right in front of the step where we retrieve the list of actions from which we select the first to be assigned to us.beginStep("[0] Waiting in the Queue", 0);{info("Enqueued virtual user " + usernameValue + " at the end of queueA");sharedData.offerLast("queueA", usernameValue);info("Wait until the user is the first in queueA");String queueValue1 = null;do {// we wait for at least 0.7 seconds before we check the head of the// queue. This is the time it takes one user to move through the// critical path, i.e. pass steps [5] Enter country and [6] Assign// to meThread.sleep(700);queueValue1 = (String) sharedData.peekFirst("queueA");info("The first user in queueA is currently: '" + queueValue1 + "' " + queueValue1.getClass() + " length " + queueValue1.length() );info("The current user is '"+ usernameValue + "' " + usernameValue.getClass() + " length " + usernameValue.length() + ": indexOf " + usernameValue.indexOf(queueValue1) + " equals " + usernameValue.equals(queueValue1) );} while ( queueValue1.indexOf(usernameValue) < 0 );info("Now the user is the first in queueA");}endStep();This will enqueue the username to the tail of our Queue. It will will wait for at least 700 milliseconds, the time it takes for one user to exit the critical path and then compare the head of our queue with it's username. This last step will be repeated while the two are not equal (indexOf less than zero). If they are equal the indexOf will yield a value of zero or larger and we will perform the critical steps.Dequeue after Critical PathAfter the virtual user has left the critical path and complete its last step the following code block needs to dequeue the virtual user. In the case of our example this is right after the action has been actually assigned to the virtual user. This will allow the next virtual user to retrieve the list of actions still available and in turn let him make his selection/assignment.info("Get and remove the current user from the head of queueA");String pollValue1 = (String) sharedData.pollFirst("queueA");The current user is removed from the head of the queue. The next one will now be able to match his username against the head of the queue.Clear and Destroy Queue for FinishWhen the script has completed, it should clear and destroy the queue. This code block can be put in the finish block of your script and/or in a separate script in order to clear and remove the queue in case you have spotted an error or want to reset the queue for some reason.info("Clear queueA");sharedData.clearQueue("queueA");info("Destroy queueA");sharedData.destroyQueue("queueA");The users waiting in queueA are cleared and the queue is destroyed. If you have scripts still executing they will be caught in a loop.I found it better to maintain a separate Reset Queue script which contained only the following code in the initialize() block. I use to call this script to make sure the queue is cleared in between multiple Loadtest runs. This script could also even be added as the first in a larger scenario, which would execute it only once at very start of the Loadtest and make sure the queues do not contain any stale entries.info("Create queueA with life time of 120 minutes");sharedData.createQueue("queueA", 120);info("Clear queueA");sharedData.clearQueue("queueA");This will create a Shared Data Queue instance of queueA and clear all entries from this queue.Monitoring QueueWhile creating the scripts it was useful to monitor the contents, i.e. the current first user in the Queue. The following code block will make sure the Shared Data Queue is accessible in the initialize() block.info("Create queueA with life time of 120 minutes");sharedData.createQueue("queueA", 120);In the run() block the following code will continuously monitor the first element of the Queue and write an informational message with the current username Value to the Result window.info("Monitor the first users in queueA");String queueValue1 = null;do {queueValue1 = (String) sharedData.peekFirst("queueA");if (queueValue1 != null)info("The first user in queueA is currently: '" + queueValue1 + "' " + queueValue1.getClass() + " length " + queueValue1.length() );} while ( true );This script can be run from OpenScript parallel to a loadtest performed by the Oracle Load Test.However it is not recommend to run this in a production loadtest as the performance impact is unknown. Accessing the Queue's head with the peekFirst() method has been reported with about 2 seconds response time by both OpenScript and OTL. It is advised to log a Service Request to see if this could be lowered in future releases of Application Testing Suite, as the pollFirst() and even offerLast() writing to the tail of the Queue usually returned after an average 0.1 seconds.Debugging QueueWhile debugging the scripts the following was useful to remove single entries from its head, i.e. the current first user in the Queue. The following code block will make sure the Shared Data Queue is accessible in the initialize() block.info("Create queueA with life time of 120 minutes");sharedData.createQueue("queueA", 120);In the run() block the following code will remove the first element of the Queue and write an informational message with the current username Value to the Result window.info("Get and remove the current user from the head of queueA");String pollValue1 = (String) sharedData.pollFirst("queueA");info("The first user in queueA was currently: '" + pollValue1 + "' " + pollValue1.getClass() + " length " + pollValue1.length() );ReferencesOracle Functional Testing OpenScript User's Guide Version 9.20 [E15488-05]Chapter 17 Using the Shared Data Modulehttp://download.oracle.com/otn/nt/apptesting/oats-docs-9.21.0030.zipOracle Fusion Middleware Oracle WebLogic Server Administration Console Online Help 11g Release 1 (10.3.4) [E13952-04]Administration Console Online Help - Manage users and groupshttp://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e13952/taskhelp/security/ManageUsersAndGroups.htm

  Read the article

• CodePlex Daily Summary for Tuesday, February 23, 2010

  CodePlex Daily Summary for Tuesday, February 23, 2010New Projects.NET Beginners: This project is a summary of project for first time developer and .net beginners. the aim is to provide tools and libraries to get startet with dev...A simple ASP.NET Currency / Money TextBox User Control: A ASP.NET TextBox control used with AJAX maskeditextender makes it possible to enter numbers but it's not very intuitive to use. CurrencyTextBox co...Academiki: Academik The project aims to be a university social network with content sharing and intellectual property. Academik makes it easier for students t...Acessando Campos com XPath Expression: Esse é um exemplo de como usar Xpath Expression na orchestration do Biztalk 2006. O Artigo do exemplo esta em www.biztalkbrasil.blogspot.comAg.CommandManager: A command manager implementation for Silverlights. Supports commanding to more or less any event using the ICommand interfaceApunta Notas: Apunta notas is just a note taking program that I created to learn WPF. Now you can write everything you need to remember or tell somebody. Or you...AzureKit: AzureKit provides a more direct approach to Azure's Table Service, which takes more advantage of the NoSQL nature of the storage medium.CRM 4.0 Distribute Workflow Activity: This plugin allows to execute a workflow for each entity that has a 1:N or N:N relationship to a given entity. For example: execute a workflow for...Dbg Shell: Dbg Shell replaces WinDbg for debugging dumps. All standard Dbg commands are supported. You can also write scripts in .Net assemblies to automated ...Egg Timer: Egg Timer is a very simple Windows Form application for setting short time-frame alarms.Enterprise Library Extensions: Extensions for the Microsoft Enterprise Library applications blocks which makes programming applications even easier.Event Calendar 2.0 Data Extractor: Really simple app to recover event calendar 2.0 information from iGoogle settings files and turn them into CSV format info for importing to other c...iTwiit: Silverlight Twitter Clientlibtym: Have your complete movie collection at a glance to manage all your movie files very comfortably!Metabolite Enterprise Libraries for EPiServer CMS using Page Type Builder: The Metabolite Enterprise libraries are a set of C# Class Libraries developed for use with EPiServer 5 R2 SP2+ projects using PageTypeBuilder. They...Metro UX: Metro UXMTI: -Personal Expense Tracker: Personal Expense Tracker helps you track your expenses. I tried to find simple win forms expense tracker but found none interesting, so i made one...rarouš: repository for rarouš.weblog articlesSacDotNetUG: SacDotNetUG is an ASP.NET MVC 2 Web application intended for the Sacramento .NET user group. This project servers 2 main goals: to promote the adop...ShellLight: ShellLight is essentially a graphical shell for Silverlight applications that enables a quick auto-complete launcher for features in your solution.Sina Weibo(Microblog): sina weibo .NET libraries and applications.Terrain Independant Navigating Automaton v2.0: This is where members of the Robot Design Team from Stony Brook University come together and work on our unique TINA. This project is for a self-go...Url Rewrite.Net: Url Rewrite.Net is an open-source SEO project which contains Custom Http Module example and Custom Configrutaion Module.It is developed in C#.NET 2...WebPart and WebService Currency Converter: This is only a sample code how to get data from yahoo finance and how to implementing on Sharepoint WebPart or WebServices. This code it is freely...WPF AutoComplete TextBox Control: A AutoComplete TextBox Control written in WPF, Looks like the system built-in auto-completion(SHAutoComplete).ZWaveAPI: This project is aim to create an open class library on ZWave. It is based on article from digiWave.dk New Releases.NET Beginners: MathLab Visual Studio Project Template: First preview to a mathlab beginners library..NET Beginners: Turtle Visual Studio Project Template: The turtle engine is a very simlpe turtle which runs over a beach and leaves a track.A simple ASP.NET Currency / Money TextBox User Control: CurrencyTextBox Source v1.0: Source code with a test project.A simple ASP.NET Currency / Money TextBox User Control: CurrencyTextBox.dll: The User Control for use in projects.Acessando Campos com XPath Expression: Source Code SampleXPathExpression: O Source code contem o Projeto em Visual Studio 2005.Actipro WPF Controls Contrib: v2009.2 build 515: Minor tweaks and updated to target Actipro WPF Studio 2009.2 (build 515).Analysis Management System: 1.0.0.1 Update: Fix - Issue 4004 Nieuw - Beschikbare klanten kunnen nu bekeken worden via Extra/Aanvragers (Ctrl R)Apunta Notas: Apunta Notas 1.0 Release Candidate: There is the Release Candidate of Apunta Notas.ARSoft.Tools.Net - C# DNS and SPF Library: 1.2.0: Added asynchronous operations for DNS client.CRM 4.0 Distribute Workflow Activity: Beta: Initial release. Complete functionality, limited testing.Dbg Shell: First Public Release: First ReleaseDnDns and PocketDnDns - A .NET DNS Client Resolver Library: DnDns Library Release 2: A DNS protocol library written completely in managed code (C#). Supports common DNS records types like A, CNAME, MX, SRV, and more. Works on Window...Egg Timer: Egg Timer v1.0: Pretty simple application. Set the time directly or use the 5 minute and 1 hour increment/decrement buttons.EnhSim: EnhSim v1.9.7.2 BETA: 1.9.7.2 BETAImportant!: This beta version includes the changes to the Flame shock damage-over-time component which are currently on the PTR. Downlo...EnhSim: EnhSim v1.9.7.3 BETA: Important!: This beta version includes the changes to the Flame shock damage-over-time component which are currently on the PTR. Download 1.9.7.1 f...Esendex SMS SDK and Downloads for Microsoft.NET languages: Esendex .NET SDK v0.4.0: Features Messaging Service: Send a single SMS message and multiple SMS messages. Send a single Voice Message and multiple Voice Messages. Send...Event Calendar 2.0 Data Extractor: V1.0: First ever build of extractorExcelDna: ExcelDna Version 0.22: An important bugfix release that fixes a critical bug in the MultiThreaded marshaling support (under Excel 2007).InfoService: InfoService v1.5 Beta 8: InfoService Beta Release Please note this is a BETA. It should be stable, but i can't gurantee that! So use it on your own risk. Please read Plugi...Krypton Palette Selectors: Release 1.2: Adds the new KryptonPaletteContextMenu and refactors the KryptonPaletteDropButton to use it.kuuy static system: kss_v1.0beta: kuuy static sytem 1.0 beta editionlibtym: libtym: First public release version. Full functionality, tested. Please notify about bugs.mojoPortal: 2.3.3.9: see release notes on mojoPortal.com http://www.mojoportal.com/mojoportal-2339-released.aspx This release makes it easy to use Artisteer html templa...Net Tool: v1.01: User interface has been changedOpen NFSe: Open NFSe 0.1 (Salvador): Open NFSe 0.1 (Salvador)Paint.NET PSD Plugin: 1.0.7: Further substantial improvements in speed of both loading and saving. In particular, loading is about 5x as fast as in version 1.0.6. Saving is ...Project Starlight: 2.0: Release 2.0 final Changes: -Numerous stability fixes -Firefox 3.5 support -Safari 64 bit support (Snow Leopard) Mac and Windows Binaries are avai...RoTwee: RoTwee 5.0.0.1: This version fix for 16620Secure Data: Secure Data 2010.02.22.01: This version has been rewritten and contains many enhancements and I encourage anyone interested to download the source code and work through the Q...TreeSizeNet: TreeSizeNet 0.10.1: - Complete Redesign - Improved Stability - Improved Performance - PieChart for directory contentUrl Rewrite.Net: Beta V0.1 Release: Includes : -Custom Http Module -Custom Configuration Section Module ( in web.config) -Rewriting ModuleVCC: Latest build, v2.1.30222.0: Automatic drop of latest buildWebPart and WebService Currency Converter: CurrencyConverter.zip: CurrencyConverter.zip Have 3 Project on this files: 1. Library Project 2. Load Library Project Using Web Services 3. Load Library Project Using We...WSUS Smart Approve: 1.0.0.2: Fix: 25903ZuneConsole: ZuneConsole: Console GUI for the Zune Customs library, which should make everything work. This is what you should download.ZuneConsole: ZuneConsole How-To Manual: A quick (only 9 pages lol) tutorial on how to add custom artist info to your Zune.Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETDotNetNuke® Community EditionImage Resizer Powertoy Clone for WindowsMicrosoft SQL Server Community & SamplesMost Active ProjectsDinnerNow.netRawrBlogEngine.NETNB_Store - Free DotNetNuke Ecommerce Catalog ModuleSharpyInfoServicejQuery Library for SharePoint Web ServicesPHPExcelpatterns & practices – Enterprise LibrarySharePoint Contrib

  Read the article

< Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >