Search Results

Search found 54098 results on 2164 pages for 'something broken'.

Page 230/2164 | < Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >

• Ubuntu unstable, showing awkward behavior

  - by Christophe De Troyer

  Let me start off by saying that this problem can't be described in such a way that allows me to find other topics, which have some relevance to this problem. That's why I created this question. In case this question might have been asked before, I apologize. So what is the problem: My computer (Intel Core I5 2500K - with HD3000 graphics -, 6 gb DDR, 1 SSD, 3 HDD's and an Asus P8Z68 mobo) runs Windows on the SDD. But I decided to give Ubuntu a chance to be my daily OS for basic needs since it's open source and I find it a handicap of not being able to work with it. I decided to run the windows installer and install Ubuntu 12.04 to my 320 Gb hdd which was not being used in my computer. After installing it and booting it, it worked great! I spent the rest of the day/night using it, and falling for it. Great, today I booted Ubuntu (I had the choice in the bootloader as I expected). It asked me for my login and it started logging in. Now, after a few (literally) minutes of letting it "boot" I tried determining the cause of this. What I've figured out so far: When I left click on my desktop it freezes completely for a few seconds I have something like tearing in the left side menu (in games, you know) when I move my mouse around It runs well when just hovering around with my mouse, but from the point I click on something it freezes. What have I tried? I ran a HD Tune diagnostic on the HDD but the performance seems to be very close to the stock values, so I'm taking it as a good HDD. I'm trying to get to the drivers update panel for Ubuntu, but with the state it's in, it's taking a lot of time.. Could anyone point me in a direction for troubleshooting this? I'm not really a noob at all, just when using Linux.. :) Thanks in advance! Christophe,

  Read the article

• Library Organization in .NET

  - by Greg Ros

  I've written a .NET bitwise operations library as part of my projects (stuff ranging from get MSB set to some more complicated bitwise transformations) and I mean to release it as free software. I'm a bit confused about a design aspect of the library, though. Many of the methods/transformations in the library come with different endianness. A simple example is a getBitAt method that regards index 0 as the least significant bit, or the most significant bit, depending on the version used. In practice, I've found that using separate functions for different endianness results in much more comprehensible and reusable code than assuming all operations are little-endian or something. I'm really stumped regarding how best to package the library. Should I have methods that have LE and BE versions take an enum parameter in their signature, e.g. Endianness.Little, Endianness.Big? Should I have different static classes with identically named methods? such as MSB.GetBit and LSB.GetBit On a much wider note, is there a standard I could use in cases like this? Some guide? Is my design issue trivial? I have a perfectionist bent, and I sometimes get stuck on tricky design issues like this... Note: I've sort of realized I'm using endianness somewhat colloquially to refer to the order/place value of digital component parts (be they bits, bytes, or words) in a larger whole, in any setting. I'm not talking about machine-level endianness or serial transmission endianness. Just about place-value semantics in general. So there isn't a context of targeting different machines/transmission techniques or something.

  Read the article

• Doing a passable 4X game AI

  - by Extrakun

  I am coding a rather "simple" 4X game (if a 4X game can be simple). It's indie in scope, and I am wondering if there's anyway to come up with a passable AI without having me spending months coding on it. The game has three major decision making portions; spending of production points, spending of movement points and spending of tech points (basically there are 3 different 'currency', currency unspent at end of turn is not saved) Spend Production Points Upgrade a planet (increase its tech and production) Build ships (3 types) Move ships from planets to planets (costing Movement Points) Move to attack Move to fortify Research Tech (can partially research a tech i.e, as in Master of Orion) The plan for me right now is a brute force approach. There are basically 4 broad options for the player - Upgrade planet(s) to its his production and tech output Conquer as many planets as possible Secure as many planets as possible Get to a certain tech as soon as possible For each decision, I will iterate through the possible options and come up with a score; and then the AI will choose the decision with the highest score. Right now I have no idea how to 'mix decisions'. That is, for example, the AI wishes to upgrade and conquer planets at the same time. I suppose I can have another logic which do a brute force optimization on a combination of those 4 decisions.... At least, that's my plan if I can't think of anything better. Is there any faster way to make a passable AI? I don't need a very good one, to rival Deep Blue or such, just something that has the illusion of intelligence. This is my first time doing an AI on this scale, so I dare not try something too grand too. So far I have experiences with FSM, DFS, BFS and A*

  Read the article

• Open Source sponsored feature development

  - by Suma

  I am considering to sponsor a development of some particular features in some Open Source tools. I would like the results of the work to be available publicly, and if possible, to be included in the main product line. The features are usually something which is of general use, but not very critical, and no one has currently a plan to develop it. For illustration, imagine I would like to use MinGW for Win32 development, but I miss a post mortem debugging option, I would like this feature to be implemented and I am willing to pay $1000 for it. Is there some common way how to proceed, or is this wildly per-project dependent? Are there some general guidelines how to contact the product developers, or are there some common meeting places where smart open source people who might interested to participate in such sponsored development meet, which I should visit to advertise the sponsoring option? Are there some specific ways how to talk about the job to be more attractive to people participating in open source (e.g. it might be more interesting for them to participate in a contest than just to take a payed job, which might have a bit of mundane feel)? Or perhaps is this something which you think has little chance to succeed, because perhaps money has very little value for open source developers? Any tips and experiences from someone who has some experience of open source sponsorhip from any side (sponsor or the developer) are welcome.

  Read the article

• Worker roles in Windows Azure to host a multiplayer server

  - by MrWiggels

  I've been doing research on where to host a simple multi-player backend for a simple game I'm developing. So as a first choice I downloaded the Windows Azure SDK, which provides a nice and simple emulator environment where you can test out your application before uploading. I also download the Azure Social Game Toolkit (Visit), and followed as far as my understanding can take me. So, down to the main question. Is there anybody with experience developing Azure applications. I'm developing a Action RPG game, in a similar vein to Diablo III. I was thinking of putting up Matchmaking, Friends Lists, etc. Is there another way to connect to Azure services via something like UDP or TCP for sending packets or does everything have to go through HTTP requests? Is it even possible to use HTTP request/response for something like this? All game commands will be simple. Because the game server and the clients will be kept in-sync and will have deterministic actions, I'm just going to send actions like "Use Primary Skill" and "Use Secondary Skill". Any hints, ideas, light bulbs or a smack-in-the-face presentation will be much appreciated.

  Read the article

• Does immutability entirely eliminate the need for locks in multi-processor programming?

  - by GlenPeterson

  Part 1 Clearly Immutability minimizes the need for locks in multi-processor programming, but does it eliminate that need, or are there instances where immutability alone is not enough? It seems to me that you can only defer processing and encapsulate state so long before most programs have to actually DO something. If a program performs actions on multiple processors, something needs to collect and aggregate the results. All this involves multi-process communication before, after, and possibly during some transformations. The start and end state of the machines are different. Can this always be done with no locks just by throwing out each object and creating a new one instead of changing the original (a crude view of immutability)? What cases still require locking? I'm interested in both the theoretical/academic answer and the practical/real-world answer. I know a lot of functional programmers like to talk about "no side effect" but in the "real world" everything has a side effect. Every processor click takes time and electricity and machine resources away from other processes. So I understand that there may be more than one perspective to answer this question from. If immutability is safe, given certain bounds or assumptions, I want to know what the borders of the "safety zone" are exactly. Some examples of possible boundaries: I/O Exceptions/errors Interfaces with programs written in other languages Interfaces with other machines (physical, virtual, or theoretical) Special thanks to @JimmaHoffa for his comment which started this question! Part 2 Multi-processor programming is often used as an optimization technique - to make some code run faster. When is it faster to use locks vs. immutable objects? Given the limits set out in Amdahl's Law, when can you achieve better over-all performance (with or without the garbage collector taken into account) with immutable objects vs. locking mutable ones? Summary I'm combining these two questions into one to try to get at where the bounding box is for Immutability as a solution to threading problems.

  Read the article

• session management: verifying a user's log-in state

  - by good_computer

  I am storing sessions in my database. Everytime a user logs in, I create a new row corresponding to the new session, generate a new session id and send it as a cookie to the browser. My session data looks something like this: { 'user_id': 1234 'user_name': 'Sam' ... } When a request comes, I check whether a cookie with a session id is sent. If it is, I fetch session data from my database (or memcache) corresponding to that session id. When the user logs out, I remove the session data from my database (and memcache), and delete the cookie from the user's browser too. Notice that in my session data, I don't have something like logged_in: true. This is because if I find a session record in the database (or memcache) I deduce that the user is logged in, and if there is no session record found, the user is not logged in. My question is: is this the right approach? Should I have a logged_in key in my session data? Is there any possibility that a session record may be present on the server where the corresponding user is actually NOT logged in? Are there any security implications in having or not having such a key?

  Read the article

• How often is your "Go-To" language the same as your favorite??

  - by K-RAN

  I know that there's already a question asking for your favorite programming language here. I'm curious though, what's your go-to language? The two can be very different. For example, I love Haskell. I learned it this past semester and I fell in love with it's very concise solutions and awesome syntax (I love theoretical math so something like fib = 1 : 1 : [ f | f <- zipWith (+) fibSeq (tail fibSeq)] makes my inner mathematician and computer scientist jump with joy!). However, the majority of my projects for classes and jobs have been in C/C++ & Java. As a result, most of the time when I'm testing something like an algorithm or Data Structure I go straight to C++. What about you guys? What languages do you love and why? What about your go-to language? What language do you use most often to get things done for work or personal projects and why? How often does a language fall into both categories??

  Read the article

• How do I initialize a Scala map with more than 4 initial elements in Java?

  - by GlenPeterson

  For 4 or fewer elements, something like this works (or at least compiles): import scala.collection.immutable.Map; Map<String,String> HAI_MAP = new Map4<>("Hello", "World", "Happy", "Birthday", "Merry", "XMas", "Bye", "For Now"); For a 5th element I could do this: Map<String,String> b = HAI_MAP.$plus(new Tuple2<>("Later", "Aligator")); But I want to know how to initialize an immutable map with 5 or more elements and I'm flailing in Type-hell. Partial Solution I thought I'd figure this out quickly by compiling what I wanted in Scala, then decompiling the resultant class files. Here's the scala: object JavaMapTest { def main(args: Array[String]) = { val HAI_MAP = Map(("Hello", "World"), ("Happy", "Birthday"), ("Merry", "XMas"), ("Bye", "For Now"), ("Later", "Aligator")) println("My map is: " + HAI_MAP) } } But the decompiler gave me something that has two periods in a row and thus won't compile (I don't think this is valid Java): scala.collection.immutable.Map HAI_MAP = (scala.collection.immutable.Map) scala.Predef..MODULE$.Map().apply(scala.Predef..MODULE$.wrapRefArray( scala.Predef.wrapRefArray( (Object[])new Tuple2[] { new Tuple2("Hello", "World"), new Tuple2("Happy", "Birthday"), new Tuple2("Merry", "XMas"), new Tuple2("Bye", "For Now"), new Tuple2("Later", "Aligator") })); I'm really baffled by the two periods in this: scala.Predef..MODULE$ I asked about it on #java on Freenode and they said the .. looked like a decompiler bug. It doesn't seem to want to compile, so I think they are probably right. I'm running into it when I try to browse interfaces in IntelliJ and am just generally lost. Based on my experimentation, the following is valid: Tuple2[] x = new Tuple2[] { new Tuple2<String,String>("Hello", "World"), new Tuple2<String,String>("Happy", "Birthday"), new Tuple2<String,String>("Merry", "XMas"), new Tuple2<String,String>("Bye", "For Now"), new Tuple2<String,String>("Later", "Aligator") }; scala.collection.mutable.WrappedArray<Tuple2> y = scala.Predef.wrapRefArray(x); There is even a WrappedArray.toMap() method but the types of the signature are complicated and I'm running into the double-period problem there too when I try to research the interfaces from Java.

  Read the article

• ubi-partman failed with exit code 10 during 12.10 fresh install

  - by Austen

  ive been trying to install ubuntu 12.10 on my acer aspire one 534h,using an iso from the official site and a 16gb flash drive using unetbootin. my aa1 is running factory settings (xp). it will boot fine from the usb, but the installation throws the error in the title after choosing my wifi options, and contineus to give the error after every subsequent step. after trying to complete the installation ingoring the error, it hangs on the ask ubuntu screen. ive tried reformatting and reflashing (sorry, heavy android user) ubuntu to the flash drive, to no avail... do i need to format somthing else, or is it something to do with th Hdd and RAID drives? ive looked in my BIOS and found nothing related. only the option for sata or ide... any help would be great, as ive been working at this all day... edit: the error message was ubi-partman has failed with exit code 10. see (gave a directory) for more info. it then informed me that if i continued the install could be incomplete or completly broken. not sure abouth the wording in the second part, but the error is word for word... thank you.

  Read the article

• Tools for managing eCommerce backend

  - by rboarman

  I am working with an eCommerce company that has outgrown their hacked together backend for managing inventory, pricing and feeds to various shopping engines (Yahoo, 3d cart, Amazon, etc.). They currently manage about 12,000 skus and are doing $40M in revenue. Their internal people are working on a new Magento solution, but that is six months away and they need to replace/improve their current solution in order to hold them over. Their current solution was developed by two people who have left the company. What tools/architecture do other eCommerce sites use to manage their inventory, pricing, product descriptions and feed generation for the shopping engines? The current solution looks like this: 1) Inventory, pricing and product descriptions are maintained in a database and in NetSuite by employees 2) New products are added to the database via import 3) Twice a week data is extracted into a giant Excel spreadsheet 4) The Excel file adjusts pricing based on some simple algorithms 5) The Excel file exports about six different csv feeds which are manually uploaded to Amazon, 3d cart, Yahoo, Google and Merchant Advantage a. Each feed is a variant of the product which different field names and formatting b. Pricing levels differ between feeds c. Some products are not sent to all feeds 6) Orders are manually parsed and the inventory is adjusted as needed once product is sold The new solution should: 1) Import data from ODBC, CSV and NetSuite (CSV via ftp) 2) Apply pricing changes via simple algorithms (< $80 add $10, $200 add $25) 3) Ensure margins are being met 4) Format and generate a bunch of CSV and XML feeds 5) Perhaps upload feeds to shopping engines automatically What I need to do is replace the Excel file with something that is maintainable and automated. Something in the .Net stack is preferable but not mandatory. I’ve been looking at BizTalk but it may take too long to develop and deploy. Any suggestions?

  Read the article

• Finding bugs is difficult, right?

  - by Laila

  Something I hear developers tell us all the time is that they take pride in being a developer.and that bugs are a dent in that pride. Someone once told me "I know I have found bugs years later, and it's the worst feeling in the world." So how can you avoid that sinking feeling when you find out a bug has been in production months before someone lets you know about it? Besides, let's face it: hearing about a bug often means a world of pain, because it can take hours to track down where the problem is and more hours (if not days) to fix it. And during that time, you're not working on something new, and that, my friends, is really frustrating! So to cheer you up, we've created a Bug Hunt game, where you battle against the clock to spot bugs. We've really enjoyed putting this together and hope you enjoy playing it too. Once you're done with the bug hunt, we explain how easy it can be to find and fix bugs in real life, using a neat mechanism that we call Automated Error Reporting. Play the game now.

  Read the article

• Ubuntu 12.04 Server ping gateway responds with destination host unreachable

  - by blckblttkd

  I consider myself fairly avid with Ubuntu and Linux, but this one has me stumped. I built up a Xen Server using Ubuntu 12.04 as the base operating system. It has multiple domUs running on it. My home network has a statically defined network where I got all the network connectivity going peachy. The server was moved to a permanent home this morning. So, the network configuration on the main system had to change. Again, another static network, but now I can't ping the upstream gateway from the host. As the VMs use this NIC over a bridge, they too are broken. Ping responds with "destination host unreachable." I simplified the networking down to a simple static network as seen below (no bridge or anything) just to get it to work. Here's the contents of my /etc/network/interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 216.7.188.228 gateway 216.7.188.225 netmask 255.255.255.240 broadcast 216.7.188.255 network 216.7.188.0 dns-nameservers 8.8.8.8 8.8.4.4 Here's the contents of route -n 0.0.0.0 216.7.188.225 0.0.0.0 UG 100 0 0 eth0 216.7.188.224 0.0.0.0 255.255.255.240 U 0 0 0 eth0 And the results of pinging the gateway: PING 216.7.188.225 (216.7.188.225) 56(84) bytes of data. From 216.7.188.228 icmp_seq=1 Destination Host Unreachable From 216.7.188.228 icmp_seq=1 Destination Host Unreachable From 216.7.188.228 icmp_seq=1 Destination Host Unreachable Again, this worked in one network flawlessly (obviously with different parameters in the interfaces file). I did try using eth1 (as there are two NICS on the server (in case the MAC address got flipped on bootup). No success there. Yes, the cable is in the right port now :) Any thoughts? I appreciate the help!

  Read the article

• How to manage drawing loop when changing render targets

  - by George Duckett

  I'm managing my game state by having a base GameScreen class with a Draw method. I then have (basically) a stack of GameScreens that I render. I render the bottom one first, as screens above might not completely cover the ones below. I now have a problem where one GameScreen changes render targets while doing its rendering. Anything the previous screens have drawn to the backbuffer is lost (as XNA emulates what happens on the xbox). I don't want to just set the backbuffer to preserve its contents as I want this to work on the xbox as well as PC. How should I manage this problem? A few ideas I've had: Render every GameScreen to its own render target, then render them all to the backbuffer. Create some kind of RenderAction queue where a game screen (and anything else I guess) could queue something to be rendered to the back buffer. They'd render whatever they wanted to any render target as normal, but if they wanted to render to the backbuffer they'd stick that in a queue which would get processed once all rendertarget rendering was done. Abstract away from render targets and backbuffers and have some way of representing the way graphics flows and transforms between render targets and have something manage/work out the correct rendering order (and render targets) given what rendering process needs as input and what it produces as output. I think each of my ideas have pros and cons and there are probably several other ways of approaching this general problem so I'm interested in finding out what solutions are out there.

  Read the article

• SMART says disk failure is imminent due to bad blocks, what do I need to do?

  - by flix

  I have on my hard drive 2 OSes: Ubuntu 12.04 and Windows Vista (I keep it just because of school). Everything was OK on both OSes, but one day on Ubuntu I was getting awkward noises from my notebooks' hard drive and then everything stopped and I couldn't do anything. On Windows everything was OK. Every time I boot Ubuntu I can get 5 minutes normal run time, without problems. After that the hard drive sounds crazy and nothing works. I could run S.M.A.R.T tests from a older Ubuntu CD (10.04) from the GUI (Disk Utility, or something like that and from terminal). From the GUI, I got that the DISK FAILURE IS IMMINENT and I have ~700 bad blocks (or broken blocks, I had that test I while ago) on my HDD. From the terminal (I don't remember if it was fsck or a SMART test command) I got that the HDD will fail in under 24 hours. Since then it passed 2-3 weeks. I've tried "badblocks" but after 10 hours it was still running and I had to stop it. Now I have to use cygwin and other alternatives for my Linux apps on Windows. How can I separate the bad blocks from Ubuntu so it wouldn't use them? Please help.

  Read the article

• Making simple forms in web applications

  - by levalex

  How do you work with forms in your web applications? I am not talking about RESTful applications, I don't want to build heavy front-end using frameworks like Backbone. For example, I need to add "contact us" form. I need to check data which was filled by user and tell him that his data was sent. Requirements: I want to use AJAX. I want to validate form on back-end side and don't want to duplicate the same code on front-end side. I have my own solution, but it doesn't satisfy me. I make an AJAX request with serialized data on form submit and get response. The next is checking "Content-type" header. html - It means that errors with filling form are exists and response html is form with error labels. - I will replace my form with response html. json and response.error_code == 0 - It means that form was successfully submited. - I will show user notification about success. json and response.error_code != 0 - Something was broken on back-end (like connection with database). other - I display the following message : We have been notified and have started to work with that problem. Please, try it later. The problem of that way is that I can't use it with forms that upload file. What is your practise? What libraries and principles do you use?

  Read the article

• Search ranking for important keywords has gone down drastically [duplicate]

  - by Vaivhav

  This question already has an answer here: How to diagnose a search engine ranking drop? 5 answers Firstly, we are a small entrepreneurial team of 3 persons and I am more like an amateur webmaster of the company's website as we cannot really afford a technical guy/department right now. A few weeks earlier, our website traffic and rankings for most keywords decreased overnight. I did a lot of reading henceforth and learned about Penguin 2.1 which people said is the reason for the drop. Something like this had never happened before. Now, I have gone through the entire Google webmaster help section. It says there that if a manual penalty is taken against us, we would notice a message in Manual Actions page. So far, we haven't received any notice from Google for web spam. Some SEO guys I contacted said they found spam links in our backlink profile. I do believe I had mistakenly purchased a cheap link/SEO scheme when I was yet very new to SEO. This was more than a year back but since then we have been legitimate. Moreover, how do I find out which is a spam link and which is not? Our content is all original, refreshing and the best you will find in our niche. We also have a blog but on a different domain (wordpress.com) from where we send out anchored links to our business website. Is this a good thing to do? Now, how should we proceed and recover our traffic/rankings. I tried searching in webmasters for a way to reach google and ask them why the traffic has decreased suddenly, but I couldn't find a contact form or something. Can someone please go through our website and help in making things more clear regarding the reason for the drop, along with a solution. Will really appreciate this as I can't get to figure this out and its taking a lot of time. Vaivhav

  Read the article

• How is the Ubuntu installation supposed to work?

  - by Bob D

  I have given up on installing Ubuntu 12.04.01 for the sixth time. I finally got Windows XP to work again. So I blitzted the Ubuntu partition and the swap partition and was about to install the sixth try when it occurred to me that ought to ask how is is "supposed" to go. My installer will install Ubuntu on the Linus ext4 partition I created by hand in Windows on my C drive. But the installer keeps insisting on installing the OS on my D drive unless I intervene. So if I choose "do something else" it will accept installing Ubuntu on the C drive in the partition I previously created, but it insists on putting the "Device for boot loader installation" on the D drive. I can select a different drive at this point (where I could not with the "along side windows choice) but what drive to I choose??? It lists sda, sda1, sda5, sdb and sdb1. The five times before this all ended in disaster letting the installer choose. So I need human intervention. Where is the safe place to do this. The results from the previous attempts left me with only the Ubuntu that would boot, the boot to windows from the grub menu failed every time. Is there a better version of Ubuntu I can use? Is V12.04.01 messed up? My goal is still to use Wine on it to run PC programs. I would like to find a shell or skin or something that makes it seem like windows but have the security and power of Linux under the good. I have seen this type of system and it worked very well. I know I am getting long winded but I have been though at least four of the seven rings of hell already, so I want this install to be the last.

  Read the article

• Wiki Application With A Reputation System

  - by Christofian

  I'm really impressed with Stack Exchange's concept of reputation (you gain reputation as you post, and the more you post, the more privileges you get), and I want to apply the concept to a wiki that I am building. Does anyone know of a php wiki that has a concept of privileges/reputation similar to Stack Exchange? I'm not necessarily looking for something identical to SE, I'm just looking for a wiki application that gives users more privileges the more they contribute positively to the wiki (SE has down votes, the wiki should have some way of identifying negative contributions too). The privileges should be category based, so the more active you are in a specific category or page, the more privileges you get for that category. There should also be site wide privileges as well, though those should be harder to access than the category privileges. NOTE: If it is not possible to get category wide privileges and site wide privileges, I will be OK with just category wide privileges or just site wide privileges. I should be able to change the requirements for each privilege, through a administration panel or through editing a file (some wiki applications don't have administration interfaces). Does anyone have a script or a solution that will do this? If the script uses something similar to reputation to determine how much a user has positively contributed to the site, then that is OK too. Please Note: I am looking for a way to rate individual user contributions, not a way to rate the quality of an entire page.

  Read the article

• HTML5 video capture and streaming?

  - by Shyatic

  I'm working on kind of an educational site, where there are teachers and students around the world (potentially). Since it's a non-profit site, and I don't have the need for it to be done tomorrow (kind of a side project of something bigger), I wanted to know the best way to figure out how to do this. I'm not a programmer by trade, I've been on the systems side of things for years, but I understand most technology and the question here is more how to gauge what to do so I can get the right resources in place. That said... here's what I am looking at. I figure the future is HTML5, and that's probably where I'd rather spend my efforts given that it will be cross platform and without the need for plugins. It will work on mobile as well. Question is, how well does HTML5 handle input media, say desktop capture and camera, or on mobile perhaps, where I'd want to use the user's phone camera, etc. Second question is dynamic streaming... I've read about MPEG DASH, then there are technologies like Smooth Streaming (which I think given the way Silverlight is going is going to be gone or useless), then also Apple and Flash, but if I'm doing HTML5 it doesn't benefit me. Any ideas here would be really helpful, and the more detail the better! :) That's about it... there are free chat services out there like using the MSN Web Chat controls (how good they are, I don't know, but worldwide most people have a Hotmail/MSN account) so I can use that for chat. I don't know its limitations of course, but that's something if people know or have suggestions, then I'm all ears. Thanks for the help, I greatly appreciate it!

  Read the article

• Social-network, online community, company and job reviews, salaries statistics and much more.. Do we have it? Do we need it?

  - by Vlad Lazarenko

  I have many friends from Ukraine who are programmers. So I found out that they have a web site that collects, organizes and analyzing information about IT companies, which includes location, feedbacks, company reviews from current and former employees etc. They also collect programming salaries and organize them by language, region etc. That web site is ran by programmers and for programmers, all information is absolutely public and free. Plus, web site has forums, and people can discuss (more or less social than specific programming stuff) things, publish articles, news etc. I personally think that is useful, especially for those who are new in this industry. For example, you may do a small research and find out that, for example, Java programmers getting paid more than PHP programmers but demand is lower. Or you get an offer from the company, is about to accept it, but read reviews and find out that they don't even provide internet access at work and if you need to download something, you have to ask your manager to do it for you, and managers share a single computer that has internet connection to get that stuff for you (there is only one such company in Kiev, Ukraine, called SMK, for Software Mac Kiev, a big shame). So the question is - do we have something like it in US? Or at least, say, for New York region? Or state? All information I managed to find online is inaccurate or not full. Forums are very specific. If we don't have it, would you be interested in creating such a portal? Thanks!

  Read the article

• Semantic Versioning and splitting apart a library, providing a bundled build

  - by Derick Bailey

  I've got a nice, fairly popular JavaScript library that is following Semantic Versioning. The current library has a few dependency libraries, which are available either as separate downloads or as part of a single bundled download. I see a need to head down this path further. I want to extract additional, smaller libraries out of the one larger library. Each of these extracted libraries would be available as separate files, or inside of the one bundled build, again. If I go down this path of extracting the libraries, and providing a bundled version of the final code, does this require a full version change in semantic versioning? Would I have to bump from 1.x to 2.x? My first thought it no: I will not change any public API, so I don't have to change the major version number. But then I wonder... well, I am restructuring a lot of things, even though the final API for the bundled version would be the same. Is there a clear answer from semver on something like this? Do I need to bump first, second or third dot? Or something else?

  Read the article

• install libreoffice in Ubuntu 12.04 is impossible

  - by user1587239

  What is wrong with Ubuntu repositories? sudo apt-get install libreoffice Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libreoffice : Depends: libreoffice-core (= 1:3.5.4-0ubuntu1.1) but it is not going to be installed Depends: libreoffice-writer but it is not going to be installed Depends: libreoffice-calc but it is not going to be installed Depends: libreoffice-impress but it is not going to be installed Depends: libreoffice-draw but it is not going to be installed Depends: libreoffice-math but it is not going to be installed Depends: libreoffice-base but it is not going to be installed Depends: libreoffice-filter-mobiledev but it is not going to be installed Depends: libreoffice-java-common (>= 1:3.5.4~) but it is not going to be installed Recommends: libreoffice-gnome but it is not going to be installed or libreoffice-kde but it is not going to be installed E: Unable to correct problems, you have held broken packages.

  Read the article

• How to fix AVI index error

  - by Tim

  I try to open an AVI file. The first software I tried is VLC media player. It reports some error about AVI index: This AVI file is broken. Seeking will not work correctly. Do you want to try to fix it? This might take a long time. I chose yes, and it began fixing AVI index and existed when the repair progress bar reaches 20% or so. Then the video started playing and stopped much earlier than when it is supposed to finish. Next I tried to open it in Totem Movie Player, which also stopped earlier at the same place as in VLC player. I tried to play it in GMplayer. Now the entire AVI file can be played from start to finish, but it is impossible to drag playing progress bar while it was possible in VLC player and Totem player. I heard that Avidemux can fix AVI index error, but later discovered it even failed to open the AVI file before it could try to fix the error. So I was wondering how I can fix the AVI index error, or at least drag the playing progress bar in GMplayer? Thanks and regards!

  Read the article

• Sprite Sheets in PyGame?

  - by Eamonn

  So, I've been doing some googling, and haven't found a good solution to my problem. My problem is that I'm using PyGame, and I want to use a Sprite Sheet for my player. This is all well and good, and it would be too, if I wasn't using a Sprite Sheet strip. Basically, if you don't understand, I have a strip of 32x32 'frames'. These frames are all in an image, along side each other. So, I have 3 frames in 1 image. I'd like to be able to use them as my sprite sheet, and not have to crop them up. I have used an awesome, popular and easy-to-use game framework for Lua called LÖVE. LÖVE has these things called "Quads". They are similar to texture regions in LibGDX, if you know what they are. Basically, quads allow you to get parts of an image. You define how large a quad is, and you define parts of an image that way, or 'regions' of an image. I would like to do something similar to this in PyGame, and use a "for" loop to go through the entire image width and height and mark each 32x32 area (or whatever the user defines as their desired frame width and height) and store that in a list or something for use later on. I'd define an animation speed and stuff, but that's for later on. I've been looking around on the web, and I can't find anything that will do this. I found 1 script on the PyGame website, but it crashed PyGame when I tried to run it. I tried for hours trying to fix it, but no luck. So, is there a way to do this? Is there a way to get regions of an image? Am I going about this the wrong way? Is there a simpler way to do this? Thanks! :-)

  Read the article

< Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >