Search Results

Search found 8089 results on 324 pages for 'auto completion'.

Page 231/324 | < Previous Page | 227 228 229 230 231 232 233 234 235 236 237 238  | Next Page >

  • Android app to remote control Samsung Smart TVs

    - by Gopinath
    Smart TV Remote is an unofficial Android app that lets you control Samsung Smart TVs connected over a local WiFi network. This app comes very handy when you want to control your TV which is not in line of sight of your TV remote control or just want to use your mobile phone/tablet to control the TV. Setting up a TV  is very easy using auto scan feature . Once the TV is setup, you are all set to start using the app as a remote control. A traditional remote controls makes use of infra red technology and it needs to be in the line of sight of the TV receiver to work. But this app make use of WiFi technology which give it flexibility of controlling the TV as long as the mobile & TV is connected to WiFi network. It just works even if the TV is behind a wall. The App provides very easy to use options to switch between channels and separate remotes with media controls, smart hub features and a numeric key pad if you want to navigate to a channel through its number. The App also provides a home screen widget with volume controls and channel navigation options. I use  this App to control Samsung E Series Smart Tv at home and it works very well. I’m impressed by the ease at which it allows to setup a TV, support for multiple TVs, controlling the TV though I’m not in the line of sight and using volume buttons of smart phone to control volume of TV. What’s annoying and missing with the app As advertised the app works very well in controlling Samsung TVs (B-, C-, D- E-, and F-Series) except it is very painful to move mouse pointer while browsing web on TV. When you try to move mouse pointer using the App, it mouse painfully slow especially. I gave us using the app to control mouse pointer after trying couple of times. I installed this App thinking that it may help me browse web on Smart TVs, especially a key board support to type web urls. App does not supports entering text either while browsing web or searching through Smart TV apps like YouTube, App Store etc. Developers of this App never advertised keyboard support so no complaints about this. But it would be very helpful if the developers allow this app use as a keyboard and rescue me from the pain of typing text using TV Remote control. Overall this is a very nice app and worth trying out – Download Smart TV Remote from Google Play

    Read the article

  • mysql completely removing

    - by Dmitry Teplyakov
    I broke my mysql and now I want to completely reinstall it. I tried: $ sudo apt-get install --reinstall mysql-server $ sudo apt-get remove --purge mysql-client mysql-server But always I see popup with proposal to change root password, I change it and got an error that I can change it.. $ sudo apt-get remove --purge mysql-client mysql-server Reading package lists... Done Building dependency tree Reading state information... Done Package mysql-client is not installed, so not removed Package mysql-server is not installed, so not removed The following packages were automatically installed and are no longer required: libmygpo-qt1 libqtscript4-network libqtscript4-gui libtag-extras1 libqtscript4-sql libqtscript4-xml amarok-utils amarok-common libqtscript4-uitools liblastfm0 libloudmouth1-0 libqtscript4-core Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up mysql-server-5.5 (5.5.28-0ubuntu0.12.04.2) ... 121114 19:04:03 [Note] Plugin 'FEDERATED' is disabled. 121114 19:04:03 InnoDB: The InnoDB memory heap is disabled 121114 19:04:03 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121114 19:04:03 InnoDB: Compressed tables use zlib 1.2.3.4 121114 19:04:03 InnoDB: Initializing buffer pool, size = 128.0M 121114 19:04:03 InnoDB: Completed initialization of buffer pool InnoDB: Error: auto-extending data file ./ibdata1 is of a different size InnoDB: 0 pages (rounded down to MB) than specified in the .cnf file: InnoDB: initial 640 pages, max 0 (relevant if non-zero) pages! 121114 19:04:03 InnoDB: Could not open or create data files. 121114 19:04:03 InnoDB: If you tried to add new data files, and it failed here, 121114 19:04:03 InnoDB: you should now edit innodb_data_file_path in my.cnf back 121114 19:04:03 InnoDB: to what it was, and remove the new ibdata files InnoDB created 121114 19:04:03 InnoDB: in this failed attempt. InnoDB only wrote those files full of 121114 19:04:03 InnoDB: zeros, but did not yet use them in any way. But be careful: do not 121114 19:04:03 InnoDB: remove old data files which contain your precious data! 121114 19:04:03 [ERROR] Plugin 'InnoDB' init function returned error. 121114 19:04:03 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 121114 19:04:03 [ERROR] Unknown/unsupported storage engine: InnoDB 121114 19:04:03 [ERROR] Aborting 121114 19:04:03 [Note] /usr/sbin/mysqld: Shutdown complete start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: mysql-server-5.5 E: Sub-process /usr/bin/dpkg returned an error code (1) It is good for me that I have not any important databases, but..

    Read the article

  • What have my fellow Delphi programmers done to make Eclipse/Java more like Delphi?

    - by Robert Oschler
    I am a veteran Delphi programmer working on my first real Android app. I am using Eclipse and Java as my development environment. The thing I miss the most of course is Delphi's VCL components and the associated IDE tools for design-time editing and code creation. Fortunately I am finding Eclipse to be one hell of an IDE with it's lush context sensitive help, deep auto-complete and code wizard facilities, and other niceties. This is a huge double treat since it is free. However, here is an example of something in the Eclipse/Java environment that will give a Delphi programmer pause. I will use the simple case of adding an "on-click" code stub for an OK button. DELPHI Drop button on a form Double-click button on form and fill in the code that will fire when the button is clicked ECLIPSE Drop button on layout in the graphical XML file editor Add the View.OnClickListener interface to the containing class's "implements" list if not there already. (Command+1 on Macs, Ctrl + 1 on PCs I believe). Use Eclipse to automatically add the code stub for unimplemented methods needed to support the View.OnClickListener interface, thus creating the event handler function stub. Find the stub and fill it in. However, if you have more than one possible click event source then you will need to inspect the View parameter to see which View element triggered the OnClick() event, thus requiring a case statement to handle multiple click event sources. NOTE: I am relatively new to Eclipse/Java so if there is a much easier way of doing this please let me know. Now that work flow isn't all that terrible, but again, that's just the simplest of use cases. Ratchet up the amount of extra work and thinking for a more complex component (aka widget) and the large number of properties/events it might have. It won't be long before you miss dearly the Delphi intelligent property editor and other designers. Eclipse tries to cover this ground by having an extensive list of properties in the menu that pops up when you right-click over a component/widget in the XML graphical layout editor. That's a huge and welcome assist but it's just not even close to the convenience of the Delphi IDE. Let me be very clear. I absolutely am not ranting nor do I want to start a Delphi vs. Java ideology discussion. Android/Eclipse/Java is what it is and there is a lot that impresses me. What I want to know is what other Delphi programmers that made the switch to the Eclipse/Java IDE have done to make things more Delphi like, and not just to make component/widget event code creation easier but any programming task. For example: Clever tips/tricks Eclipse plugins you found other ideas? Any great blog posts or web resources on the topic are appreciated too. -- roschler

    Read the article

  • Add Bookmarks and Notes to Delicious in IE 8

    - by Asian Angel
    Are you constantly adding bookmarks to your Delicious account while browsing but want to keep UI use to a minimum? Add bookmarks directly to your account from the context menu using the Share with Delicious accelerator. Share with Delicious in Action To add the accelerator click on Add to Internet Explorer and confirm the installation when the secondary window appears. This is going to be much better than having the Favorites Bar or a new toolbar taking up precious UI room. When you find a webpage that you would like to bookmark right click within the page, go to All Accelerators and select Share with Delicious. The form for the new bookmark will open in a new tab with the URL and title filled in. All that you need to do is add any desired notes/tags and save the bookmark. Suppose that you want notes from the page added to the bookmark. Highlight the desired text, right click on it, then go to All Accelerators and select Share with Delicious. As before the form will open in a new tab…you can see the highlighted text was entered into the notes section for the new bookmark. All that is left to do is add an appropriate tag and save. Once you save your new bookmark the tab will auto navigate to the webpage that you just saved. Returning to our account showed the new bookmark ready for future use along with a the notes for later reference. Conclusion If you add bookmarks to your Delicious account but want to save UI room, then the Share with Delicious accelerator will make a nice addition to Internet Explorer. Links Add the Share with Delicious accelerator to Internet Explorer 8 Similar Articles Productive Geek Tips Access and Manage Your Delicious Bookmarks the Easy WayQuickly Add Bookmarks to Delicious in FirefoxAutomate Adding Bookmarks to del.icio.usHow Many Times Has an Article Been Bookmarked on del.icio.us?Add Social Bookmarking (Digg This!) Links to your Wordpress Blog TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Use ILovePDF To Split and Merge PDF Files TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule

    Read the article

  • Reset All Internet Explorer 8 Settings to Fix Stability Problems

    - by Mysticgeek
    If you like to tweak and customize IE with Add-ons and changing settings, sometimes you may have problems with stability. To save time, you can reset all of the IE settings rather than trying to troubleshoot individual areas. Reset IE Settings To reset Internet Explorer Settings, click on Tools then Internet Options. When you reset the settings, you won’t lose personal settings like your homepage, search provider, passwords…etc. The Internet Options screen opens…click on the Advanced tab, then under Reset Internet Explorer settings click on the Reset button. You’ll need to verify that you want to reset all Internet Explorer Settings. If you choose to, you can delete all of your personal settings as well, but it shouldn’t be necessary to fix stability issues. The settings will start to reset, and when it’s finished close out of the message box. For the process to complete you’ll need to restart Internet Explorer. When it restarts you’ll be presented with the Welcome screen where you can go through the setup wizard again. After it’s complete, you should be back in business and can start using IE again. With the new enhancements and features available in Internet Explorer 8, sometimes too much tweaking can cause it to stop working. One area you could start with is troubleshooting IE 8 Add-ons. However, if you don’t want to waste time troubleshooting each potential issue, sometimes it’s just easier to reset things back to how they were originally. Similar Articles Productive Geek Tips Troubleshooting Internet Explorer on Vista Locking Up or Running SlowlyFix Internet Explorer Not Prompting to Choose Save Location in XPDealing With Windows Vista Explorer Screwing Up Auto-Detection of Folder TypesMysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPClean Up Past Notification Icons in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow

    Read the article

  • What's going on with INETA and the Regional Speakers Bureau?

    - by Chris Williams
    For those of you that have been waiting patiently (and not so patiently) I'm happy to say that we're very near completion on some changes/enhancements/improvements that will allow us to finally go live with the INETA Regional Speakers Bureau. I know quite a few of you have already registered, which is great (though some of you may need to come back and update your info) and we've had a few folks submit requests, mostly in a test capacity, but soon we'll be up and live. Here's how it breaks down. Be sure to read this, because things have changed a bit from when we initially announced it. 1. The majority of our speaker/event funding is going into the Regional Speakers Bureau.  The National Bureau still exists, but it's a good bit smaller than it was before, and it's not an "every group" benefit anymore. We'll be using the National Bureau as more of a strategic task force, targeting high impact events and areas that need some community building love from INETA. These will be identified and handled on a case by case basis, and may include more than just user group events. 2. You're going to get more events per group, per year than you did before. Not only are we focusing more resources on this program, but we're also making a lot of efforts to use it more effectively. With the INETA Regional Speakers Bureau, you should be able to get 2-3 INETA speakers per year, on average. Not every geographical area will have exactly the same experience, but we're doing the best we can. 3. It's not a farm team program for the National Bureau. Unsurprisingly, I managed to offend a number of people when I previously made the comment that the Regional Speakers Bureau program was a farm team or stepping stone to the National Bureau. It was a poor choice of words.  Anyone can participate in the Regional Speakers Bureau, and I look forward to working with all of you. 4. There is assistance for your efforts. The exact final details are still being hammered out, but expect it to look something like this: (all distances listed are based on a round trip) Distances < 120 miles = $0 121 miles - 240 miles = $50 (effectively 1 to 2 hours, each way) 241 miles - 360 miles = $100 (effectively 2 to 3 hours, each way) 361 miles - 480 miles = $200 (effectively 3 to 4 hours, each way) For those of you who travel a lot, we're working on a solution to handle group visits when you're away from home. These will (for now) be handled on a case by case basis. 5. We're going to make it as easy as possible to work with the program. In order to do this, we need a few things from you. For speakers, that means your home address. It also means (maybe) filling out a simple 1 line expense report via the INETA website. For user groups, it means making sure your meeting address is up to date as well. 6. Distances will be automatically calculated from your home of record to the user group event and back. We realize that this is not a perfect solution to every instance, but we're not paying you to speak at an event, and you won't be taxed on this money. It's simply some assistance to make your community efforts easier. Our way of saying thanks for everything you do. 7. Sounds good so far, what's the catch? There's always a catch, right? In this case there are two of them: 1) At this time, Microsoft employees are welcome to use the website to line up speaking engagements with user groups, but are not eligible for financial assistance. 2) Anyone can register and use the website to line up speaking engagements with user groups, however you must receive and maintain a net score of 3+ positive ratings (we're implementing a thumbs up / thumbs down system) in order to receive financial assistance. These ratings are provided by the User Group leaders after the meeting has taken place. 8. Involvement by the User Group leaders is a key factor in the success of this program. Your job isn't done once you request a speaker. After you've had your meeting, it's critical that you go back to the website and take a very small survey. Doing this ensures that the speaker gets rated (and compensated if eligible) and also ensures that you can make another request, since you won't be able to make a new request if you have an old one outstanding. 9. What about Canada? We're definitely working on that. Unfortunately nothing new to report on that front, other than to say that we're trying. So... this is where things stand currently. We're working very quickly to get this in place and get speakers and groups together. If you have any questions, please leave a comment below and I'll answer them as quickly as possible. If I've forgotten anything, or if things change, I'll update it here. Thanks, Chris G. Williams INETA Board of Directors

    Read the article

  • Silverlight Cream for June 21, 2011 -- #1110

    - by Dave Campbell
    In this Issue: Colin Eberhardt, Kunal Chowdhury(-2-), Peter Kuhn(-2-, -3-), Mike Gold, WindowsPhoneGeek, Nigel Sampson, Paul Sheriff, Dhananjay Kumar, and Erno de Weerd. Above the Fold: Silverlight: "Silverlight Debug Helper" Peter Kuhn3 WP7: "Metro In Motion #8 – AutoCompleteBox Reveal Animation" Colin Eberhardt Shoutouts: Check out the Top 5 from my friends at SilverlightShow from last week: SilverlightShow for June 13 - 19, 2011 From SilverlightCream.com: Metro In Motion #8 – AutoCompleteBox Reveal Animation Colin Eberhardt found yet another 'Metro In Motion' to duplicate... this one is the auto-complete effect seen in the WP7 email client... check out the video on the post! Windows Phone 7 (Mango) Tutorial - 16 - How to Create a WP7 Alarm Application? Kunal Chowdhury has a couple more of his Mango tutorials up... number 16 (!) is on creating an Alarm app using scheduled tasks. Windows Phone 7 (Mango) Tutorial - 17 - How to Create a WP7 Reminder Application? Kunal Chowdhury's latest is number 17 in the Mango series and he's discussing the Reminder class which is part of the Scheduler namespace. Silverlight Debug Helper Peter Kuhn has deployed a new version of his "Silverlight Debug Helper"... this time he's added support for FireFox and Chrome. Getting ready for the Windows Phone 7 Exam 70-599 (Part 3) Peter Kuhn also has Part 3 of his series posted at SilverlightShow on getting ready for the WP7 exam. XNA for Silverlight developers: Part 13 - Mango (2) Finally, Peter Kuhn's latest XNA for Silverlight developers tutorial is up at SilverlightShow and is the 2nd Mango post for game devs. Detecting Altitude using the WP7 Phone WindowsPhoneGeek apparently turned the reigns of his blog over to Mike Gold for this post about Altitude detection on the WP7. Windows Phone Mango: Getting Started with MVVM in 10 Minutes If you're out there and still haven't gotten your head around MVVM, or want to take another look at why you're beating yourself up doing it [ :) ]... WindowsPhoneGeek has a quick write-up on MVVM and WP7.1 apps Creating app promotional videos Nigel Sampson details how he uses Expression Encoder to produce the app videos he has on his blog for his WP7* apps. Sort Data in Windows Phone using Collection View Source Paul Sheriff's latest post is up, and is another WP7 post. This time on how to sort the data you consume by using a CollectionViewSource object in XAML and not write any code! Viewing Flickr Images on Windows 7.1 Phone or Mango Phone Dhananjay Kumar has a tutorial up for WP7.1 showing how to use the Flickr REST service to display images on your device. Windows Phone 7: Drawing graphics for your application with Inkscape – Part II: Icons Part 2 of Erno de Weerd's Trilogy on Drawing graphics for your WP7* apps in Inkscape is up... this tutorial is all about icons... good stuff! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • [GEEK SCHOOL] Network Security 3: Windows Defender and a Malware-Free System

    - by Ciprian Rusen
    In this second lesson we are going to talk about one of the most confusing security products that are bundled with Windows: Windows Defender. In the past, this product has had a bad reputation and for good reason – it was very limited in its capacity to protect your computer from real-world malware. However, the latest version included in Windows 8.x operating systems is much different than in the past and it provides real protection to its users. The nice thing about Windows Defender in its current incarnation, is that it protects your system from the start, so there are never gaps in coverage. We will start this lesson by explaining what Windows Defender is in Windows 7 and Vista versus what it is in Windows 8, and what product to use if you are using an earlier version. We next will explore how to use Windows Defender, how to improve its default settings, and how to deal with the alerts that it displays. As you will see, Windows Defender will have you using its list of quarantined items a lot more often than other security products. This is why we will explain in detail how to work with it and remove malware for good or restore those items that are only false alarms. Lastly, you will learn how to turn off Windows Defender if you no longer want to use it and you prefer a third-party security product in its place and then how to enable it back, if you have changed your mind about using it. Upon completion, you should have a thorough understanding of your system’s default anti-malware options, or how to protect your system expeditiously. What is Windows Defender? Unfortunately there is no one clear answer to this question because of the confusing way Microsoft has chosen to name its security products. Windows Defender is a different product, depending on the Windows operating system you are using. If you use Windows Vista or Windows 7, then Windows Defender is a security tool that protects your computer from spyware. This but one form of malware made out of tools and applications that monitor your movements on the Internet or the activities you make on your computer. Spyware tends to send the information that is collected to a remote server and it is later used in all kinds of malicious purposes, from displaying advertising you don’t want, to using your personal data, etc. However, there are many other types of malware on the Internet and this version of Windows Defender is not able to protect users from any of them. That’s why, if you are using Windows 7 or earlier, we strongly recommend that you disable Windows Defender and install a more complete security product like Microsoft Security Essentials, or third-party security products from specialized security vendors. If you use Windows 8.x operating systems, then Windows Defender is the same thing as Microsoft Security Essentials: a decent security product that protects your computer in-real time from viruses and spyware. The fact that this product protects your computer also from viruses, not just from spyware, makes a huge difference. If you don’t want to pay for security products, Windows Defender in Windows 8.x and Microsoft Security Essentials (in Windows 7 or earlier) are good alternatives. Windows Defender in Windows 8.x and Microsoft Security Essentials are the same product, only their name is different. In this lesson, we will use the Windows Defender version from Windows 8.x but our instructions apply also to Microsoft Security Essentials (MSE) in Windows 7 and Windows Vista. If you want to download Microsoft Security Essentials and try it out, we recommend you to use this page: Download Microsoft Security Essentials. There you will find both 32-bit and 64-bit editions of this product as well versions in multiple languages. How to Use and Configure Windows Defender Using Windows Defender (MSE) is very easy to use. To start, search for “defender” on the Windows 8.x Start screen and click or tap the “Windows Defender” search result. In Windows 7, search for “security” in the Start Menu search box and click “Microsoft Security Essentials”. Windows Defender has four tabs which give you access to the following tools and options: Home – here you can view the security status of your system. If everything is alright, then it will be colored in green. If there are some warnings to consider, then it will be colored in yellow, and if there are threats that must be dealt with, everything will be colored in red. On the right side of the “Home” tab you will find options for scanning your computer for viruses and spyware. On the bottom of the tab you will find information about when the last scan was performed and what type of scan it was. Update – here you will find information on whether this product is up-to-date. You will learn when it was last updated and the versions of the definitions it is using. You can also trigger a manual update. History – here you can access quarantined items, see which items you’ve allowed to run on your PC even if they were identified as malware by Windows Defender, and view a complete list with all the malicious items Windows Defender has detected on your PC. In order to access all these lists and work with them, you need to be signed in as an administrator. Settings – this is the tab where you can turn on the real-time protection service, exclude files, file types, processes, and locations from its scans as well as access a couple of more advanced settings. The only difference between Windows Defender in Windows 8.x and Microsoft Security Essentials (in Windows 7 or earlier) is that, in the “Settings” tab, Microsoft Security Essentials allows you to set when to run scheduled scans while Windows Defender lacks this option.

    Read the article

  • Gparted Partition Mount Points Alternate Between 2 Physical Disk Drives

    - by California Ken
    I'm running Ubuntu Server 14.04 on a system with 2 physical disk drives. I am frequently seeing mount errors on startup. When I check the drive partitions using GPARTED, I see that my two "non-system created" data partitions have the wrong disk assignments (i.e. sda1 vs sdb1) or visa-versa. If I hand edit /etc/fstab to match GPARTED, the system will boot error free one time. On the second restart I will get the "serious mount problem" error for the 2 data partitions and when I check GPARTED, the disk assignments have changed again (again, GPARTED and fstab don't match). A listing of my /etc/fstab is: /etc/fstab: static file system information. # Use 'blkid' to print the universally unique identifier for a device; this may be used with UUID= as a more robust way to name devices that works even if disks are added and removed. See fstab(5). # / was on /dev/sdb2 during installation UUID=766a06a4-e5af-484a-adf0-fa1e88da7212 / ext4 errors=remount-ro,user_xattr,acl,barrier=1 0 1 swap was on /dev/sda6 during installation UUID=8c42f835-ead3-43fb-88d8-196f5dfc3aa7 none swap sw 0 0 swap was on /dev/sdb3 during installation UUID=2214deec-ba98-47da-aea7-4e46998f3e57 none swap sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 /dev/sda1 /media/ken/Linux-Data ext3 defaults 0 2 /dev/sda5 /media/ken/Data2 ext4 defaults 0 2 The device designations in the last 2 lines are the ones in question. The fstab entries to NOT change between system restarts but the mount points in the GPARTED display do. Does anyone have a fix for this? Thanks Mr. Young and Mr Gedak, Following is my fstab file and two blkid outputs. The fstab output is correct. The first blkid output was after a reboot and is WRONG! The sda and sdb device partition data is reversed. The 2nd blkid output was after a second reboot (fstab not changed). It shows the sda and adb partition data CORRECTLY. I didn't see any duplicate UUIDs. Does anyone have any idea why the GPARTED and blkid outputs alternate on consecutive reboots? The alternating partition data is real since when the partition assignments are reversed, the boot sequence halts with disk mounting errers (I have to press "s" to skip the mounts). Thanks again. Ken I copied the contents of a text file showing my fstab and 2 blkid outputs. The text file contents show up in the text entry box but does not appear in the main body of the question. Is there a way I can attach the text file or edit this question so that the text is displayed for question viewers?

    Read the article

  • Oracle ATG Web Commerce 10 Implementation Developer Boot Camp - Reading (UK) - October 1-12, 2012

    - by Richard Lefebvre
    REGISTER NOW: Oracle ATG Web Commerce 10 Implementation Developer Boot Camp Reading, UK, October 1-12, 2012! OPN invites you to join us for a 10-day implementation bootcamp on Oracle ATG Web Commerce in Reading, UK from October 1-12, 2012.This 10-day boot camp is designed to provide partners with hands-on experience and technical training to successfully build and deploy Oracle ATG Web Commerce 10 Applications. This particular boot camp is focused on helping partners develop the essential skills needed to implement every aspect of an ATG Commerce Application from scratch, (not CRS-based), with a specific goal of enabling experienced Java/J2EE developers with a path towards becoming functional, effective, and contributing members of an ATG implementation team. Built for both new and experienced ATG developers alike, the collaborative nature of this program and its exercises, have proven to be highly effective and extremely valuable in learning the best practices for implementing ATG solutions. Though not required, this bootcamp provides a structured path to earning a Certified Oracle ATG Web Commerce 10 Specialization! What Is Covered: This boot camp is for Application Developers and Software Architects wanting to gain valuable insight into ATG application development best practices, as well as relevant and applicable implementation experience on projects modeled after four of the most common types of applications built on the ATG platform. The following learning objectives are all critical, and are of equal priority in enabling this role to succeed. This learning boot camp will help with: Building a basic functional transaction-ready ATG Web Commerce 10 Application. Utilizing ATG’s platform features such as scenarios, slots, targeters, user profiles and segments, to create a personalized user experience. Building Nucleus components to support and/or extend application functionality. Understanding the intricacies of ATG order checkout and fulfillment. Specifying, designing and implementing new commerce features in ATG 10. Building a functional commerce application modeled after four of the most common types of applications built on the ATG platform, within an agile-based project team environment and under simulated real-world project conditions. Duration: The Oracle ATG Web Commerce 10 Implementation Developer Boot Camp is an instructor-led workshop spanning 10 days. Audience: Application Developers Software Architects Prerequisite Training and Environment Requirements: Programming and Markup Experience with Java J2EE, JavaScript, XML, HTML and CSS Completion of Oracle ATG Web Commerce 10 Implementation Specialist Development Guided Learning Path modules Participants will be required to bring their own laptop that meets the minimum specifications:   64-bit PC and OS (e.g. Windows 7 64-bit) 4GB RAM or more 40GB Hard Disk Space Laptops will require access to the Internet through Remote Desktop via Windows. Agenda Topics: Week 1 – Day 1 through 5 Build a Basic Commerce Application In week one of the boot camp training, we will apply knowledge learned from the ATG Web Commerce 10 Implementation Developer Guided Learning Path modules, towards building a basic transaction-ready commerce application. There will be little to no lectures delivered in this boot camp, as developers will be fully engaged in ATG Application Development activities and best practices. Developers will work independently on the following lab assignments from day's 1 through 5: Lab Assignments  1 Environment Setup 2 Build a dynamic Home Page 3 Site Authentication 4 Build Customer Registration 5 Display Top Level Categories 6 Display Product Sub-Categories 7 Display Product List Page 8 Display Product Detail Page 9 ATG Inventory 10 Build “Add to Cart” Functionality 11 Build Shopping Cart 12 Build Checkout Page  13 Build Checkout Review Page 14 Create an Order and Build Order Confirmation Page 15 Implement Slots and Targeters for Personalization 16 Implement Pricing and Promotions 17 Order Fulfillment Back to top Week 2 – Day 6 through 10 Team-based Case Project In the second week of the boot camp training, participants will be asked to join a project team that will select a case project for the team to implement. Teams will be able to choose from four of the most common application types developed and deployed on the ATG platform. They are as follows: Hard goods with physical fulfillment, Soft goods with electronic fulfillment, a Service or subscription case example, a Course/Event registration case example. Team projects will have approximately 160 hours of use cases/stories for each team to build (40 hours per developer). Each day's Use Cases/Stories will build upon the prior day's work, and therefore must be fully completed at the end of each day. Please note that this boot camp intends to simulate real-world project conditions, and as such will likely require the need for project teams to possibly work beyond normal business hours. To promote further collaboration and group learning, each team will be asked to present their work and share the methodologies and solutions that they've applied to their cases at the end of each day. Location: Oracle Reading CVC TPC510 Room: Wraysbury Reading, UK 9:00 AM – 5:00 PM  Registration Fee (10 Days): US $3,375 Please click on the following link to REGISTER or  visit the Oracle ATG Web Commerce 10 Implementation Developer Boot Camp page for more information. Questions: Patrick Ty Partner Enablement, Oracle Commerce Phone: 310.343.7687 Mobile: 310.633.1013 Email: [email protected]

    Read the article

  • SQL Developer Debugging, Watches, Smart Data, & Data

    - by thatjeffsmith
    After presenting the SQL Developer PL/SQL debugger for about an hour yesterday at KScope12 in San Antonio, my boss came up and asked, “Now, would you really want to know what the Smart Data panel does?” Apparently I had ‘made up’ my own story about what that panel’s intent is based on my experience with it. Not good Jeff, not good. It was a very small point of my presentation, but I probably should have read the docs. The Smart Data tab displays information about variables, using your Debugger: Smart Data preferences. You can also specify these preferences by right-clicking in the Smart Data window and selecting Preferences. Debugger Smart Data Preferences, control number of variables to display The Smart Data panel auto-inspects the last X accessed variables. So if you have a program with 26 variables, instead of showing you all 26, it will just show you the last two variables that were referenced in your program. If you were to click on the ‘Data’ debug panel, you’ll see EVERYTHING. And if you only want to see a very specific set of values, then you should use Watches. The Smart Data Panel As I step through the code, the variables being tracked change as they are referenced. Only the most recent ones display. This is controlled by the ‘Maximum Locations to Remember’ preference. Step through the code, see the latest variables accessed The Data Panel All variables are displayed. Might be information overload on large PL/SQL programs where you have many dozens or even hundreds of variables to track. Shows everything all the time Watches Watches are added manually and only show what you ask for. Data on Demand – add a watch to track a specific variable Remember, you can interact with your data If you want to do more than just watch, you can mouse-right on a data element, and change the value of the variable as the program is running. This is one of the primary benefits to debugging over using DBMS_OUTPUT to track what’s happening in your program. Change the values while the program is running to test your ‘What if?’ scenarios

    Read the article

  • Grub2 -- Dualboot Ubuntu LTS 12.04 and Windows 7 -- Detects two Windows 7 (loader) entries

    - by DarkIron112
    this is the first question I have ever asked the Ubuntu Community. :D I'm fairly new to Ubuntu, but I understand the basics and know how to navigate the Terminal. I also know how to ask for/research my problems before asking for/ help. I have scoured the internet high and low and learned much of how Grub2 works. But nothing has helped me to solve my problem. My problem is this: I have a computer that has three hard drives. It previously had Windows XP, but I upgraded to Windows 7. I also installed Ubuntu 12.04 LTS (Precise Pangolin). During my installation of Windows 7, there was a failure and I had to restart the installation. Afterwards, I installed Ubuntu. After some trouble removing all traces of the XP OS (Ubuntu auto-detected it, but not Windows 7) I got the two OSes working flawlessly. Or, almost. When booting up, Grub2 used to display Ubuntu, Ubuntu Recovery Mode, Other Versions of Linux, memtest, followed by "Windows 7 (loader) on /dev/sda1" and "Windows 7 (loader) on /dev/sdb1". I eventually removed Recovery Mode, Other Versions, and Memtest. Now, when I run: sudo update-grub I get this print-out: Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.2.0-26-generic Found initrd image: /boot/initrd.img-3.2.0-26-generic Found Windows 7 (loader) on /dev/sda1 Found Windows 7 (loader) on /dev/sdb1 I would like to remove "Windows 7 (loader) on /dev/sda1", as it is a broken entry that shouldn't exist, and must have been installed during my first Windows 7 attempt. I cannot find a Windows 7 entry in /etc/grub.d... And I don't know where to look. Here is a layout of my hard drives: /dev/sda1/ (1.82 TiB), NTFS ("Media") /dev/sdb1/ (100 Mib), NTFS ("System Reserved") /dev/sdb2/ (149 GiB), NTFS ("Windows 7") /dev/sdb3/ (149 GiB), Extended (" ") /dev/sdb4/ (145 GiB), ext4 (" ") /dev/sdb5/ (4 GiB), linux-swap (" ") /dev/sdc1/ (488.28 GiB), NTFS ("Downloads") /dev/sdc2/ (488.28 GiB), NTFS ("AltMedia") /dev/sdc3/ (886.45 GiB), NTFS ("Personal") unallocated (2.09 MiB), unallocated What I think has happened: Windows 7 installed first and badly. I installed it again. First, there was Windows XP to guide where the bootloader went to so it was put on /dev/sdb1/. But, the second time no such guide existed so the machine put another bootloader on /dev/sda1/. sda1, by the way, is the only partition on a 2TB drive. No boot record partition appears to exist according to gedit. I'm not sure where Grub2 is getting this information from. But, there it is. Is there anything somebody can do to help me? Or, is there any more information I should add? Thank you, community!

    Read the article

  • Responding to Invites

    - by Daniel Moth
    Following up from my post about Sending Outlook Invites here is a shorter one on how to respond. Whatever your choice (ACCEPT, TENTATIVE, DECLINE), if the sender has not unchecked the "Request Response" option, then send your response. Always send your response. Even if you think the sender made a mistake in keeping it on, send your response. Seriously, not responding is plain rude. If you knew about the meeting, and you are happy investing your time in it, and the time and location work for you, and there is an implicit/explicit agenda, then ACCEPT and send it. If one or more of those things don't work for you then you have a few options. Send a DECLINE explaining why. Reply with email to ask for further details or for a change to be made. If you don’t receive a response to your email, send a DECLINE when you've waited enough. Send a TENTATIVE if you haven't made up your mind yet. Hint: if they really require you there, they'll respond asking "why tentative" and you have a discussion about it. When you deem appropriate, instead of the options above, you can also use the counter propose feature of Outlook but IMO that feature has questionable interaction model and UI (on both sender and recipient) so many people get confused by it. BTW, two of my outlook rules are relevant to invites. The first one auto-marks as read the ACCEPT responses if there is no comment in the body of the accept (I check later who has accepted and who hasn't via the "Tracking" button of the invite). I don’t have a rule for the DECLINE and TENTATIVE cause typically I follow up with folks that send those.   The second rule ensures that all Invites go to a specific folder. That is the first folder I see when I triage email. It is also the only folder which I have configured to show a count of all items inside it, rather than the unread count - when sending a response to an invite the item disappears from the folder and hence it is empty and not nagging me. Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • Sqlite &amp; Entity Framework 4

    - by Dane Morgridge
    I have been working on a few client app projects in my spare time that need to persist small amounts of data and have been looking for an easy to use embedded database.  I really like db4o but I'm not wanting to open source this particular project so it was not an option.  Then I remembered that there was an ADO.NET provider for sqlite.  Being a fan of sqlite in general, I downloaded it and gave it an install.  The installer added tooling support for both Visual Studio 2008 & 2010 which is nice because I am working almost exclusively in 2010 at the moment.  I noticed that the provider also had support for Entity Framework, but not specifically v4.  I created a database using the tools that get installed with Visual Studio and all seemed to work fine.  I went on to create an Entity Framework context and selected the sqlite database and to my surprise it worked with out any problems.  The model showed up just like it would for any database and so I started to write a little code to test and then.. BAM!.. Exception. "Mixed mode assembly is built against version 'v2.0.50727' of the runtime and cannot be loaded in the 4.0 runtime without additional configuration information." A quick bit of searching on Bing found the answer.  To get it working, you need to include the following code in your web.config file: 1: <startup useLegacyV2RuntimeActivationPolicy="true"> 2: <supportedRuntime version="v4.0" /> 3: </startup> And then everything magically works.  Entity Framework 4 features worked, like lazy loading and even the POCO templates worked.  The only thing that didn't work was the model first development.  The SQL generated was for SQL Server and of course wouldn't run on sqlite without some modifications. The only other oddity I found was that in order to have an auto incrementing id, you have to use the full integer data type for sqlite; a regular int won't do the trick.  This translates to an Int64, or a long when working with it in Entity Framework.  Not a big deal, but something you need to be aware of. All in all, I am quite impressed with the Entity Framework support I found with sqlite.  I wasn't really expecting much at all, and I was pleasantly surprised. I downloaded the ADO.NET sqlite provider from http://sqlite.phxsoftware.com/.  If you want to use an embedded database with Entity Framework, give it a look.  It will be well worth your time.

    Read the article

  • EPM 11.1.2 - R&A DATABASE CONNECTIONS DISAPPEAR FROM THE "DATABASE CONNECTION MANAGER

    - by Powder
    When accessing the database connection panel through Reporting and Analysis all previously entered database connection do not appear. This is due to a bug in the Windows SMB2 protocol. To work around this bug you have to disable the protocol. On Windows 2008 the protocol is automatically enabled. This needs to be done on both the servers and the clients. Note that “server” is the server which hosts RAF repository service and RM1 folder, “client” – server which hosts replicated Repository service that accesses repository files via network i.e. \\<server_host>\RM1  In order to disable SMB 2.0 on the server side, follow these steps:  1. Run "regedit" on Windows Server 2008 based computer.  2. Expand and locate the sub tree as follows.  HKLM\System\CurrentControlSet\Services\LanmanServer\Parameters  3. Add a new REG_DWORD key with the name of "Smb2" (without quotation mark)  Value name: Smb2  Value type: REG_DWORD  0 = disabled  1 = enabled 4. Set the value to 0 to disable SMB 2.0, or set it to 1 to re-enable SMB 2.0.  5. Reboot the server.  To disable SMB 2.0 for Windows Vista or Windows Server 2008 systems that are the “client” systems run the following commands:  sc config lanmanworkstation depend= bowser/mrxsmb10/nsi  sc config mrxsmb20 start= disabled  Note there's an extra " " (space) after the "=" sign.  To enable back SMB 2.0 for Windows Vista or Windows Server 2008 systems that  are the “client” systems run the following commands: sc config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi  sc config mrxsmb20 start= auto  Again, note there's an extra " " (space) after the "=" sign. 

    Read the article

  • Handling Coding Standards at Work (I'm not the boss)

    - by Josh Johnson
    I work on a small team, around 10 devs. We have no coding standards at all. There are certain things that have become the norm but some ways of doing things are completely disparate. My big one is indentation. Some use tabs, some use spaces, some use a different number of spaces, which creates a huge problem. I often end up with conflicts when I merge because someone used their IDE to auto format and they use a different character to indent than I do. I don't care which we use I just want us all to use the same one. Or else I'll open a file and some lines have curly brackets on the same line as the condition while others have them on the next line. Again, I don't mind which one so long as they are all the same. I've brought up the issue of standards to my direct manager, one on one and in group meetings, and he is not overly concerned about it (there are several others who share the same view as myself). I brought up my specific concern about indentation characters and he thought a better solution would be to, "create some kind of script that could convert all that when we push/pull from the repo." I suspect that he doesn't want to change and this solution seems overly complicated and prone to maintenance issues down the road (also, this addresses only one manifestation of a larger issue). Have any of you run into a similar situation at work? If so, how did you handle it? What would be some good points to help sell my boss on standards? Would starting a grass roots movement to create coding standards, among those of us who are interested, be a good idea? Am I being too particular, should I just let it go? Thank you all for your time. Note: Thanks everyone for the great feedback so far! To be clear, I don't want to dictate One Style To Rule Them All. I'm willing to concede my preferred way of doing something in favor of what suits everyone the best. I want consistency and I want this to be a democracy. I want it to be a group decision that everyone agrees on. True, not everyone will get their way, but I'm hoping that everyone will be mature enough to compromise for the betterment of the group. Note 2: Some people are getting caught up in the two examples I gave above. I'm more after the heart of the matter. It manifests itself with many examples: naming conventions, huge functions that should be broken up, should something go in a util or service, should something be a constant or injected, should we all use different versions of a dependency or the same, should an interface be used for this case, how should unit tests be set up, what should be unit tested, (Java specific) should we use annotations or external config. I could go on.

    Read the article

  • Is the science of Computer Science dead?

    - by Veaviticus
    Question : Is the science and art of CS dead? By that I mean, the real requirements to think, plan and efficiently solve problems seems to be falling away from CS these days. The field seems to be lowering the entry-barrier so more people can 'program' without having to learn how to truly program. Background : I'm a recent graduate with a BS in Computer Science. I'm working a starting position at a decent sized company in the IT department. I mostly do .NET and other Microsoft technologies at my job, but before this I've done Java stuff through internships and the like. I personally am a C++ programmer for my own for-fun projects. In Depth : Through the work I've been doing, it seems to me that the intense disciplines of a real science don't exist in CS anymore. In the past, programmers had to solve problems efficiently in order for systems to be robust and quick. But now, with the prevailing technologies like .NET, Java and scripting languages, it seems like efficiency and robustness have been traded for ease of development. Most of the colleagues that I work with don't even have degrees in Computer Science. Most graduated with Electrical Engineering degrees, a few with Software Engineering, even some who came from tech schools without a 4 year program. Yet they get by just fine without having the technical background of CS, without having studied theories and algorithms, without having any regard for making an elegant solution (they just go for the easiest, cheapest solution). The company pushes us to use Microsoft technologies, which take all the real thought out of the matter and replace it with libraries and tools that can auto-build your project for you half the time. I'm not trying to hate on the languages, I understand that they serve a purpose and do it well, but when your employees don't know how a hash-table works, and use the wrong sorting methods, or run SQL commands that are horribly inefficient (but get the job done in an acceptable time), it feels like more effort is being put into developing technologies that coddle new 'programmers' rather than actually teaching people how to do things right. I am interested in making efficient and, in my opinion, beautiful programs. If there is a better way to do it, I'd rather go back and refactor it than let it slide. But in the corporate world, they push me to complete tasks quickly rather than elegantly. And that really bugs me. Is this what I'm going to be looking forward to the rest of my life? Are there still positions out there for people who love the science and art of CS rather than just the paycheck? And on the same note, here's a good read if you haven't seen it before The Perils Of Java Schools

    Read the article

  • Fixing the #mvvmlight code snippets in Visual Studio 11

    - by Laurent Bugnion
    If you installed the latest MVVM Light version for Windows 8, you may encounter an issue where code snippets are not displayed correctly in the Intellisense popup. I am working on a fix, but for now here is how you can solve the issue manually. The code snippets MVVM Light, when installed correctly, will install a set of code snippets that are very useful to allow you to type less code. As I use to say, code is where bugs are, so you want to type as little of that as possible ;) With code snippets, you can easily auto-insert segments of code and easily replace the keywords where needed. For instance, every coder who uses MVVM as his favorite UI pattern for XAML based development is used to the INotifyPropertyChanged implementation, and how boring it can be to type these “observable properties”. Obviously a good fix would be something like an “Observable” attribute, but that is not supported in the language or the framework for the moment. Another fix involves “IL weaving”, which is a post-build operation modifying the generate IL code and inserting the “RaisePropertyChanged” instruction. I admire the invention of those who developed that, but it feels a bit too much like magic to me. I prefer more “down to earth” solutions, and thus I use the code snippets. Fixing the issue Normally, you should see the code snippets in Intellisense when you position your cursor in a C# file and type mvvm. All MVVM Light snippets start with these 4 letters. Normal MVVM Light code snippets However, in Windows 8 CP, there is an issue that prevents them to appear correctly, so you won’t see them in the Intellisense windows. To restore that, follow the steps: In Visual Studio 11, open the menu Tools, Code Snippets Manager. In the combobox, select Visual C#. Press Add… Navigate to C:\Program Files (x86)\Laurent Bugnion (GalaSoft)\Mvvm Light Toolkit\SnippetsWin8 and select the CSharp folder. Press Select Folder. Press OK to close the Code Snippets Manager. Now if you type mvvm in a C# file, you should see the snippets in your Intellisense window. Cheers Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

    Read the article

  • Part 1 - 12c Database and WLS - Overview

    - by Steve Felts
    The download of Oracle 12c database became available on June 25, 2013.  There are some big new features in 12c database and WebLogic Server will take advantage of them. Immediately, we will support using 12c database and drivers with WLS 10.3.6 and 12.1.1.  When the next version of WLS ships, additional functionality will be supported (those rows in the table below with all "No" values will get a "Yes).  The following table maps the Oracle 12c Database features supported with various combinations of currently available WLS releases, 11g and 12c Drivers, and 11g and 12c Databases. Feature WebLogic Server 10.3.6/12.1.1 with 11g drivers and 11gR2 DB WebLogic Server 10.3.6/12.1.1 with 11g drivers and 12c DB WebLogic Server 10.3.6/12.1.1 with 12c drivers and 11gR2 DB WebLogic Server 10.3.6/12.1.1 with 12c drivers and 12c DB JDBC replay No No No Yes (Active GridLink only in 10.3.6, add generic in 12.1.1) Multi Tenant Database No Yes (except set container) No Yes (except set container) Dynamic switching between Tenants No No No No Database Resident Connection pooling (DRCP) No No No No Oracle Notification Service (ONS) auto configuration No No No No Global Database Services (GDS) No Yes (Active GridLink only) No Yes (Active GridLink only) JDBC 4.1 (using ojdbc7.jar files & JDK 7) No No Yes Yes  The My Oracle Support (MOS) document covering this is "WebLogic Server 12.1.1 and 10.3.6 Support for Oracle 12c Database [ID 1564509.1]" at the link https://support.oracle.com/epmos/faces/DocumentDisplay?id=1564509.1. The following documents are also key references:12c Oracle Database Developer Guide http://docs.oracle.com/cd/E16655_01/appdev.121/e17620/toc.htm 12c Oracle Database Administrator's Guide http://docs.oracle.com/cd/E16655_01/server.121/e17636/toc.htm . I plan to write some related blog articles not to duplicate existing product documentation but to introduce the features, provide some examples, and tie together some information to make it easier to understand. How do you get started with 12c?  The easiest way is to point your data source at a 12c database.  The only change on the WLS side is to update the URL in your data source (assuming that you are not just upgrading your database).  You can continue to use the 11.2.0.3 driver jar files that shipped with WLS 10.3.6 or 12.1.1.  You shouldn't see any changes in your application.  You can take advantage of enhancements on the database side that don't affect the mid-tier.  On the WLS side, you can take advantage of using Global Data Service or connecting to a tenant in a multi-tenant database transparently. If you want to use the 12c client jar files, it's a bit of work because they aren't shipped with WLS and you can't just drop in ojdbc6.jar as in the old days.  You need to use a matched set of jar files and they need to come before existing jar files in the CLASSPATH.  The MOS article is written from the standpoint that you need to get the jar files directly - download almost 1G and install over 600M footprint to get 15 jar files.  Assuming that you have the database installed and you can get access to the installation (or ask the DBA), you need to copy the 15 jar files to each machine with a WLS installation and get them in your CLASSPATH.  You can play with setting the PRE_CLASSPATH but the more practical approach may be to just update WL_HOME/common/bin/commEnv.sh directly.  There's a change in the transaction completion behavior (read the MOS) so if you think you might run into that, you will want to set -Doracle.jdbc.autoCommitSpecCompliant=false.  Also if you are running with Active GridLink, you must set -Doracle.ucp.PreWLS1212Compatible=true (how's that for telling you that this is fixed in WLS 12.1.2).  Once you get the configuration out of the way, you can start using the new ojdbc7.jar in place of the ojdbc6.jar to get the new JDBC 4.1 API's.  You can also start using Application Continuity.  This feature is also known as JDBC Replay because when a connection fails you get a new one with all JDBC operations up to the failure point automatically replayed.  As you might expect, there are some limitations but it's an interesting feature.  Obviously I'm going to focus on the 12c database features that we can leverage in WLS data source.  You will need to read other sources or the product documentation to get all of the new features.

    Read the article

  • Oracle ERP Cloud Solution Defines Revenue Recognition Software Market

    - by Steve Dalton
    Normal 0 false false false EN-US X-NONE X-NONE Revenue is a fundamental yardstick of a company's performance, and one of the most important metrics for investors in the capital markets. So it’s no surprise that the accounting standard boards have devoted significant resources to this topic, with a key goal of ensuring that companies use a consistent method of recognizing revenue. Due to the myriad of revenue-generating transactions, and the divergent ways organizations recognize revenue today, the IFRS and FASB have been working for 12 years on a common set of accounting standards that apply to all industries in virtually all countries. Through their joint efforts on May 28, 2014 the FASB and IFRS released the IFRS 15 / ASU 2014-9 (Revenue from Contracts with Customers) converged accounting standard. This standard applies to revenue in all public companies, but heavily impacts organizations in any industry that might have complex sales contracts with multiple distinct deliverables (obligations). For example, an auto dealer who bundles free service with the sale of a car can only recognize the service revenue once the owner of the car brings it in for work. Similarly, high-tech companies that bundle software licenses, consulting, and support services on a sales contract will recognize bundled service revenue once the services are delivered. Now all companies need to review their revenue for hidden bundling and implicit obligations. Numerous time-consuming and judgmental activities must be performed to properly recognize revenue for complex sales contracts. To illustrate, after the contract is identified, organizations must identify and examine the distinct deliverables, determine the estimated selling price (ESP) for each deliverable, then allocate the total contract price to each deliverable based on the ESPs. In terms of accounting, organizations must determine whether the goods or services have been delivered or performed to the customer’s satisfaction, then either book revenue in the current period or record a liability for the obligation if revenue will be recognized in a future accounting period. Oracle Revenue Management Cloud was architected and developed so organizations can simplify and streamline revenue recognition. Among other capabilities, the solution uses business rules to efficiently identify and examine contracts, intelligently calculate and allocate deliverable prices based on prescribed inputs, and accurately recognize revenue for each deliverable based on customer satisfaction. "Oracle works very closely with our customers, the Big 4 accounting firms, and the accounting standard boards to deliver an adaptive, comprehensive, new generation revenue recognition solution,” said Rondy Ng, Senior Vice President, Applications Development. “With the recently announced IFRS 15 / ASU 2014-9, Oracle is ready to support customer adoption of the new standard with our Revenue Management Cloud,” said Rondy. Oracle Revenue Management Cloud, an integral part of Oracle Financials Cloud, helps organizations comply with accounting standards, provides them with confidence that reported revenue is materially accurate, and simplifies the accounting process for revenue recognition. Stay tuned to this blog for regular updates on Oracle Revenue Management Cloud. We also invite you to review our new oracle.com ERP pages @ oracle.com/erp. We will be updating these pages very soon with more information about Oracle Revenue Management Cloud.

    Read the article

  • Highlights from recent Yammer video

    - by Eric Jensen
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} A few weeks back, Ryan Kennedy of Yammer gave a talk about Berkeley DB Java Edition. You can find it posted here on Alex Popescu's Blog, or go directly to the video post itself. It was full of useful nuggets of information, such as why they chose to use BDB JE, performance, and some tips & tricks at the end. At over 40 minutes, the video is quite long. Ryan is an entertaining speaker, so I suggest you watch all of it. But if you only have time for the highlights, here are some times you can sync to:  06:18 hear the Berkeley DB JE features that caused Yammer select it, including: replication auto leader election, failover configurable durability and consistency guarantees 23:10 System performance characteristics 35:08 Check out the tips and tricks for using Berkeley DB JE I know the Berkeley DB development team is very pleased that BDB JE is working out well for Yammer. We definitely encourage others out there to take note of this success, especially if your requirements are similar to Yammer's (which Ryan outlines at the beginning of his talk)

    Read the article

  • UDK game Prisoners/Guards

    - by RR_1990
    For school I need to make a little game with UDK, the concept of the game is: The player is the headguard, he will have some other guard (bots) who will follow him. Between the other guards and the player are some prisoners who need to evade the other guards. It needs to look like this My idea was to let the guard bots follow the player at a certain distance and let the prisoners bots in the middle try to evade the guard bots. Now is the problem i'm new to Unreal Script and the school doesn't support me that well. Untill now I have only was able to make the guard bots follow me. I hope you guys can help me or make me something that will make this game work. Here is the class i'm using to let te bots follow me: class ChaseControllerAI extends AIController; var Pawn player; var float minimalDistance; var float speed; var float distanceToPlayer; var vector selfToPlayer; auto state Idle { function BeginState(Name PreviousStateName) { Super.BeginState(PreviousStateName); } event SeePlayer(Pawn p) { player = p; GotoState('Chase'); } Begin: player = none; self.Pawn.Velocity.x = 0.0; self.Pawn.Velocity.Y = 0.0; self.Pawn.Velocity.Z = 0.0; } state Chase { function BeginState(Name PreviousStateName) { Super.BeginState(PreviousStateName); } event PlayerOutOfReach() { `Log("ChaseControllerAI CHASE Player out of reach."); GotoState('Idle'); } // class ChaseController extends AIController; CONTINUED // State Chase (continued) event Tick(float deltaTime) { `Log("ChaseControllerAI in Event Tick."); selfToPlayer = self.player.Location - self.Pawn.Location; distanceToPlayer = Abs(VSize(selfToPlayer)); if (distanceToPlayer > minimalDistance) { PlayerOutOfReach(); } else { self.Pawn.Velocity = Normal(selfToPlayer) * speed; //self.Pawn.Acceleration = Normal(selfToPlayer) * speed; self.Pawn.SetRotation(rotator(selfToPlayer)); self.Pawn.Move(self.Pawn.Velocity*0.001); // or *deltaTime } } Begin: `Log("Current state Chase:Begin: " @GetStateName()@""); } defaultproperties { bAdjustFromWalls=true; bIsPlayer= true; minimalDistance = 1024; //org 1024 speed = 500; }

    Read the article

  • Fun With the Chrome JavaScript Console and the Pluralsight Website

    - by Steve Michelotti
    Originally posted on: http://geekswithblogs.net/michelotti/archive/2013/07/24/fun-with-the-chrome-javascript-console-and-the-pluralsight-website.aspxI’m currently working on my third course for Pluralsight. Everyone already knows that Scott Allen is a “dominating force” for Pluralsight but I was curious how many courses other authors have published as well. The Pluralsight Authors page - http://pluralsight.com/training/Authors – shows all 146 authors and you can click on any author’s page to see how many (and which) courses they have authored. The problem is: I don’t want to have to click into 146 pages to get a count for each author. With this in mind, I figured I could write a little JavaScript using the Chrome JavaScript console to do some “detective work.” My first step was to figure out how the HTML was structured on this page so I could do some screen-scraping. Right-click the first author - “Inspect Element”. I can see there is a primary <div> with a class of “main” which contains all the authors. Each author is in an <h3> with an <a> tag containing their name and link to their page:     This web page already has jQuery loaded so I can use $ directly from the console. This allows me to just use jQuery to inspect items on the current page. Notice this is a multi-line command. In order to use multiple lines in the console you have to press SHIFT-ENTER to go to the next line:     Now I can see I’m extracting data just fine. At this point I want to follow each URL. Then I want to screen-scrape this next page to see how many courses each author has done. Let’s take a look at the author detail page:       I can see we have a table (with a css class of “course”) that contains rows for each course authored. This means I can get the number of courses pretty easily like this:     Now I can put this all together. Back on the authors page, I want to follow each URL, extract the returned HTML, and grab the count. In the code below, I simply use the jQuery $.get() method to get the author detail page and the “data” variable that is in the callback contains the HTML. A nice feature of jQuery is that I can simply put this HTML string inside of $() and I can use jQuery selectors directly on it in conjunction with the find() method:     Now I’m getting somewhere. I have every Pluralsight author and how many courses each one has authored. But that’s not quite what I’m after – what I want to see are the authors that have the MOST courses in the library. What I’d like to do is to put all of the data in an array and then sort that array descending by number of courses. I can add an item to the array after each author detail page is returned but the catch here is that I can’t perform the sort operation until ALL of the author detail pages have executed. The jQuery $.get() method is naturally an async method so I essentially have 146 async calls and I don’t want to perform my sort action until ALL have completed (side note: don’t run this script too many times or the Pluralsight servers might think your an evil hacker attempting a DoS attack and deny you). My C# brain wants to use a WaitHandle WaitAll() method here but this is JavaScript. I was able to do this by using the jQuery Deferred() object. I create a new deferred object for each request and push it onto a deferred array. After each request is complete, I signal completion by calling the resolve() method. Finally, I use a $.when.apply() method to execute my descending sort operation once all requests are complete. Here is my complete console command: 1: var authorList = [], 2: defList = []; 3: $(".main h3 a").each(function() { 4: var def = $.Deferred(); 5: defList.push(def); 6: var authorName = $(this).text(); 7: var authorUrl = $(this).attr('href'); 8: $.get(authorUrl, function(data) { 9: var courseCount = $(data).find("table.course tbody tr").length; 10: authorList.push({ name: authorName, numberOfCourses: courseCount }); 11: def.resolve(); 12: }); 13: }); 14: $.when.apply($, defList).then(function() { 15: console.log("*Everything* is complete"); 16: var sortedList = authorList.sort(function(obj1, obj2) { 17: return obj2.numberOfCourses - obj1.numberOfCourses; 18: }); 19: for (var i = 0; i < sortedList.length; i++) { 20: console.log(authorList[i]); 21: } 22: });   And here are the results:     WOW! John Sonmez has 44 courses!! And Matt Milner has 29! I guess Scott Allen isn’t the only “dominating force”. I would have assumed Scott Allen was #1 but he comes in as #3 in total course count (of course Scott has 11 courses in the Top 50, and 14 in the Top 100 which is incredible!). Given that I’m in the middle of producing only my third course, I better get to work!

    Read the article

  • User-Defined Customer Events & their impact (FA Type Profile)

    - by Rajesh Sharma
    CC&B automatically creates field activities when a specific Customer Event takes place. This depends on the way you have setup your Field Activity Type Profiles, the templates within, and associated SP Condition(s) on the template. CC&B uses the service point type, its state and referenced customer event to determine which field activity type to generate.   Customer events available in the base product include: Cut for Non-payment (CNP) Disconnect Warning (DIWA) Reconnect for Payment (REPY) Reread (RERD) Stop Service (STOP) Start Service (STRT) Start/Stop (STSP)   Note the Field values/codes defined for each event.   CC&B comes with a flexibility to define new set of customer events. These can be defined in the Look Up - CUST_EVT_FLG. Values from the Look Up are used on the Field Activity Type Profile Template page.     So what's the use of having user-defined Customer Events? And how will the system detect such events in order to create field activity(s)?   Well, system can only detect such events when you reference a user-defined customer event on a Severance Event Type for an event type Create Field Activities.     This way you can create additional field activities of a specific field activity type for user-defined customer events.   One of our customers adopted this feature and created a user-defined customer event CNPW - Cut for Non-payment for Water Services. This event was then linked on a Field Activity Type Profile and referenced on a Severance Event - CUT FOR NON PAY-W. The associated Severance Process was configured to trigger a reconnection process if it was cancelled (done by defining a Post Cancel Algorithm). Whenever this Severance Event was executed, a specific type of Field Activity was generated for disconnection purposes. The Field Activity type was determined by the system from the Field Activity Type Profile referenced for the SP Type, SP's state and the referenced user-defined customer event. All was working well until the time when they realized that in spite of the Severance Process getting cancelled (when a payment was made); the Post Cancel Algorithm was not executed to start a Reconnection Severance Process for the purpose of generating a reconnection field activity and reconnecting the service.   Basically, the Post Cancel algorithm (if specified on a Severance Process Template) is triggered when a Severance Process gets cancelled because a credit transaction has affected/relieved a Service Agreement's debt.   So what exactly was happening? Now we come to actual question as to what is the impact in having a user-defined customer event.   System defined/base customer events are hard-coded across the entire system. There is an impact even if you remove any customer event entry from the Look Up. User-defined customer events are not recognized by the system anywhere else except in the severance process, as described above.   There are few programs which have routines to first validate the completion of disconnection field activities, which were raised as a result of customer event CNP - Cut for Non-payment in order to perform other associated actions. One such program is the Post Cancel Algorithm, referenced on a Severance Process Template, generally used to reconnect services which were disconnected from other Severance Event, specifically CNP - Cut for Non-Payment. Post cancel algorithm provided by the product - SEV POST CAN does the following (below is the algorithm's description):   This algorithm is called after a severance process has been cancelled (typically because the debt was paid and the SA is no longer eligible to be on the severance process). It checks to see if the process has a completed 'disconnect' event and, if so, starts a reconnect process using the Reconnect Severance Process Template defined in the parameter.    Notice the underlined text. This algorithm implicitly checks for Field Activities having completed status, which were generated from Severance Events as a result of CNP - Cut for Non-payment customer event.   Now if we look back to the customer's issue, we can relate that the Post Cancel algorithm was triggered, but was not able to find any 'Completed' CNP - Cut for Non-payment related field activity. And hence was not able to start a reconnection severance process. This was because a field activity was generated and completed for a customer event CNPW - Cut for Non-payment of Water Services instead.   To conclude, if you introduce new customer events that extend or simulate base customer events, the ones that are included in the base product, ensure that there is no other impact either direct or indirect to other business functions that the application has to offer.  

    Read the article

  • Ubuntu boots to terminal on start up

    - by Jules
    For a long time I've been unable to get updates due to a "repositories not found" error. Yesterday someone fixed this for me but after installing 94 days worth of updates my system wanted to restart. It looks like it is booting normally but then it opens a terminal and asks for my login and password. I had tried Ctrl+ Alt +F7 and startx to no avail. Here is everything that appears on screen when I turn the computer on. Ubuntu 10.04.4 LTS box-o-doom tty1 box-o-doom login:julian password: last login: Sun Jul 8 10:28:02 BST tty1 Linux box-o-doom 2.6.32-41-generic-pae #91-Ubuntu SMP Wed Jun 13 12:00:09 UTC 20 12 i686 GNU/Linux Ubuntu 10.04.4 LTS Welcome to Ubuntu! *Documentation: http://help.ubuntu.com julian@box-o-doom:~$_ i then tried dmesg which produced hundreds of lines all very similar to the first line reproduced here [ 9.453119] type=1505 audit1341742405.022:10): operation="profile_replace" pid=743 name="/usr/lib/connman/scripts/dhclient-script" follwed by this at the end [ 9.475880] alloc irq_desc for 27 on node-1 [ 9.475883] alloc kstat_irqs on node-1 [ 9.475890]forcedeth 0000:00:07.0: irq27 for MSI/MSI-X [ 9.760031] hda_code:ALC662 rev1: BIOS auto-probing. [ 10.048095] input:HDA Digital PCBeep as /devices/pci 0000:00:05.o/inp ut/input6 [ 10.862278] ppdev: user-space parallel port driver [ 20.268018] eth0: no IPv6 routers present julian@box-o-doom:~$_ results of startx lots of text scrolls off the screen and i have no way of reading it. but everything i can see is reproduced below current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version Markers: (--) probed, (**) from config file, (==) defult setting, (++) from command line, (!!) notice, (II) informational. (WW) Warning, (EE) error, (NI) not implemented, (??) unknown. (==) log file: "/var/log/Xorg.0.log", Time: SUn Jul 8 12:02:23 2012 (==) using config file: "/etc/X11/xorg.conf" (==)using config directory: "/usr/lib/X11/xorg.conf.d" FATAL: Module nvidia not found. (EE) NVIDIA: Failed to load the NVIDIA kernal module please check your (EE) NVIDIA: systems kernal log for aditional error messages. (EE) Failed to load module "nvidia" (module specific error, 0) (EE) No drivers available. Fatal server error: no screens found please consult the X.org foundation support at http://wiki.x.org for help please also check the log files at "/var/log/X.org.0.log" for aditional informati on ddxSigGiveUp: Closing log giving up xinit: No such file or directory (errno 2): unable to connect to X server xinit: No suck process (errno 3): server error julian@box-o-doom:~$_

    Read the article

< Previous Page | 227 228 229 230 231 232 233 234 235 236 237 238  | Next Page >