Search Results

Search found 8275 results on 331 pages for 'bad appz'.

Page 231/331 | < Previous Page | 227 228 229 230 231 232 233 234 235 236 237 238  | Next Page >

• VPN on OSX disconnects after precisely 2 minutes and 30 seconds on specific network

  - by Tyilo

  When connecting to my own VPN server on a specific network, called public-network, my Mac disconnects the VPN connection after 2 minutes and 30 seconds. I have performed several tests and this is the result: It works fine until the 2:30 mark It doesn't matter which Mac I use, it still disconnects It doesn't matter which client I use, all of the following does the same: OSX system client, HMA! Pro VPN and Shimo It doesn't matter which protocol I use, at least all of these protocols does the same: PPTP, OpenVPN and L2TP over IPSec The same thing happens using my own VPN server and HMA!'s VPN server. All other clients (Windows/iPhone) can use any of these VPN servers and protocols without problem on public-network On OSX, all the protocols, clients and servers works fine on any other network So it seems that it is the combination of OSX, VPN & public-network that causes this. This is the syslog from my VPN server, when the disconnection happens: Feb 2 12:04:32 raspberrypi pptpd[31400]: CTRL: EOF or bad error reading ctrl packet length. Feb 2 12:04:32 raspberrypi pptpd[31400]: CTRL: couldn't read packet header (exit) Feb 2 12:04:32 raspberrypi pptpd[31400]: CTRL: CTRL read failed Feb 2 12:04:32 raspberrypi pptpd[31400]: CTRL: Reaping child PPP[31401] Feb 2 12:04:32 raspberrypi pppd[31401]: Hangup (SIGHUP) Feb 2 12:04:32 raspberrypi pppd[31401]: Modem hangup Feb 2 12:04:32 raspberrypi pppd[31401]: Connect time 2.5 minutes. Feb 2 12:04:32 raspberrypi pppd[31401]: Sent 3963649 bytes, received 362775 bytes. Feb 2 12:04:32 raspberrypi pppd[31401]: MPPE disabled Feb 2 12:04:32 raspberrypi pppd[31401]: Connection terminated. Feb 2 12:04:32 raspberrypi pppd[31401]: Exit. Feb 2 12:04:32 raspberrypi pptpd[31400]: CTRL: Client <ip-adress> control connection finished

  Read the article

• Using NginX and Apache alongside for both static and dynamic files

  - by faridv

  Background: I've searched a lot and found these useful threads about using of Apache or NginX for static or dynamic files. But they are old (mostly about 1 or 2 years ago) and I think both webservers, specifically Nginx has had important changes in performance and usage. So I think take another look on these issue cannot be that bad. Nginx (for static files) and Apache (for dynamic content)? nginx better than apache for dynamic content? [closed] Apache or NGINX for PHP? Nginx as reverse proxy to Apache with only dynamic content? My question: I have a PHP web application with lots of dynamic files and lots of static contents (videos, images etc.) and it's currently running on a CentOS 6 server and Apache 2.2 since 2 months ago. In past few days, number of our site visitors have gained so fast and I just thought if this number continues to increase with current ratio, we need to change many things (web server, application, etc.) to prevent failures. Because of hardware limitations that we are facing, I thought that it's best for us to start with web server. Should I start with something else? Should I try to increase performance of my PHP application and forget about web server for now? (even if gonna take a long time!) Because of huge usage of .htaccess files (for redirection, rewrites, etc.), I think it's gonna be painful to migrate to NginX as default web server or maybe only for dynamic files. Does this mean that I can't even use Nginx as reverse proxy? I'm not sure latest stable version of NginX and PHP-FPM have a better performance over my current Apache and my limitations (too many things) won't let me to give it a try. Which one is doing better currently? What will I lose by migrating to Nginx? To make it short, what should I do?

  Read the article

• Is it ever good to share a userid?

  - by Ladlestein

  On Un*x, Is it ever a good idea to have one userid that many different people log into when they do stuff? Often I'm installing software or something on a Linux or BSD system. I've developed software for 24 years now, so I know how to make the machine do what I want, but I've never had responsibility for maintaining a multi-user installation where anyone really cared about security. So my opinions feel untested. Now I'm at a company where there's a server that many people log into with a single userid and do stuff. I'm installing some software on it. It's not really a public-facing server, and is only accessible via VPN, but it's used by many people nonetheless, to run tests on custom software, things like that. It's a staging server. I'm thinking that at the very least, using a single user obscures an audit trail, and that's bad. And it's just inelegant, because people don't have their own spaces on the server. But then again, with more userids, maybe there's a greater chance that one can be compromised, allowing attackers to gain access. ?

  Read the article

• Will disabling hyperthreading improve performance on our SQL Server install

  - by Sam Saffron

  Related to: Current wisdom on SQL Server and Hyperthreading Recently we upgraded our Windows 2008 R2 database server from an X5470 to a X5560. The theory is both CPUs have very similar performance, if anything the X5560 is slightly faster. However, SQL Server 2008 R2 performance has been pretty bad over the last day or so and CPU usage has been pretty high. Page life expectancy is massive, we are getting almost 100% cache hit for the pages, so memory is not a problem. When I ran: SELECT * FROM sys.dm_os_wait_stats order by signal_wait_time_ms desc I got: wait_type waiting_tasks_count wait_time_ms max_wait_time_ms signal_wait_time_ms ------------------------------------------------------------ -------------------- -------------------- -------------------- -------------------- XE_TIMER_EVENT 115166 2799125790 30165 2799125065 REQUEST_FOR_DEADLOCK_SEARCH 559393 2799053973 5180 2799053973 SOS_SCHEDULER_YIELD 152289883 189948844 960 189756877 CXPACKET 234638389 2383701040 141334 118796827 SLEEP_TASK 170743505 1525669557 1406 76485386 LATCH_EX 97301008 810738519 1107 55093884 LOGMGR_QUEUE 16525384 2798527632 20751319 4083713 WRITELOG 16850119 18328365 1193 2367880 PAGELATCH_EX 13254618 8524515 11263 1670113 ASYNC_NETWORK_IO 23954146 6981220 7110 1475699 (10 row(s) affected) I also ran -- Isolate top waits for server instance since last restart or statistics clear WITH Waits AS ( SELECT wait_type, wait_time_ms / 1000. AS [wait_time_s], 100. * wait_time_ms / SUM(wait_time_ms) OVER() AS [pct], ROW_NUMBER() OVER(ORDER BY wait_time_ms DESC) AS [rn] FROM sys.dm_os_wait_stats WHERE wait_type NOT IN ('CLR_SEMAPHORE','LAZYWRITER_SLEEP','RESOURCE_QUEUE', 'SLEEP_TASK','SLEEP_SYSTEMTASK','SQLTRACE_BUFFER_FLUSH','WAITFOR','LOGMGR_QUEUE', 'CHECKPOINT_QUEUE','REQUEST_FOR_DEADLOCK_SEARCH','XE_TIMER_EVENT','BROKER_TO_FLUSH', 'BROKER_TASK_STOP','CLR_MANUAL_EVENT','CLR_AUTO_EVENT','DISPATCHER_QUEUE_SEMAPHORE', 'FT_IFTS_SCHEDULER_IDLE_WAIT','XE_DISPATCHER_WAIT', 'XE_DISPATCHER_JOIN')) SELECT W1.wait_type, CAST(W1.wait_time_s AS DECIMAL(12, 2)) AS wait_time_s, CAST(W1.pct AS DECIMAL(12, 2)) AS pct, CAST(SUM(W2.pct) AS DECIMAL(12, 2)) AS running_pct FROM Waits AS W1 INNER JOIN Waits AS W2 ON W2.rn <= W1.rn GROUP BY W1.rn, W1.wait_type, W1.wait_time_s, W1.pct HAVING SUM(W2.pct) - W1.pct < 95; -- percentage threshold And got wait_type wait_time_s pct running_pct CXPACKET 554821.66 65.82 65.82 LATCH_EX 184123.16 21.84 87.66 SOS_SCHEDULER_YIELD 37541.17 4.45 92.11 PAGEIOLATCH_SH 19018.53 2.26 94.37 FT_IFTSHC_MUTEX 14306.05 1.70 96.07 That shows huge amounts of time synchronizing queries involving parallelism (high CXPACKET). Additionally, anecdotally many of these problem queries are being executed on multiple cores (we have no MAXDOP hints anywhere in our code) The server has not been under load for more than a day or so. We are experiencing a large amount of variance with query executions, typically many queries appear to be slower that they were on our previous DB server and CPU is really high. Will disabling Hyperthreading help at reducing our CPU usage and increase throughput?

  Read the article

• Weird connectivity issue wtih USB Wifi stick.

  - by Carlos Nunez

  Hi, all! I'm not sure if this is the appropriate place to throw this question out there, but I'll give it a shot. I'm setting up two PCs, and I've been having massive troubles getting a USB wireless dongle working. I have two Sony VAIOs (Windows XP, SP2) that I found second-hand, and since they will be in a location too far to connect by Ethernet (no, can't do patch panels here :p), I need to connect them by wireless. Easiest and cheapest way to do that at the moment is by using two USB wireless sticks that I've had for a while, but never used. One of the computers is using a SMC-manufactured card, whereas the other is using a Belkin F5D7050. The box with the SMC card can see and authenticate with my router just fine, and has no problem obtaining a DHCP lease. The box with the Belkin, on the other hand, isn't so lucky. While it can see my router and associate with it, it will not obtain a DHCP-issued address. Worse, when I assign a static IP address to the NIC, it can ping the entire network and access the internet (meaning it can authenticate with the router), but no computer can ping to it UNLESS that computer pinged the computer that's pinging it first. Confused? Well, so am I. Has anyone had this issue before? Is this just a sign of a bad card? (For the moment, I have it connected by Ethernet, as I haven't moved it yet. However, this will be a problem when I set it up in its new home later.) Thanks! -Carlos Nunez

  Read the article

• Is "DSLAM congestion" a legitimate reason for slow DSL?

  - by Jay Bazuzi

  My DSL has been extremely slow in the evenings recently. To test it, I telnet to my DSL Modem, and ping the gateway. This way I eliminate internet congestion and local network issues. In the mornings I get 30ms - 50ms pings. In the evenings, it bounces around a lot, but 10000ms pings are common. I complained to Qwest support, and they said it was a known issue on their end, their engineers were working on it, and wouldn't say anything else. A couple days later I complained again, and they sent out a technician. He tested my house wiring and found that one of them had a short. It was an unused line, so we disconnected it, and he said things looked better and left. My daytime speeds improved at this point, but evening is still bad. I complained to Qwest support again, and they said it was a problem with DSLAM congestion at their end, and that they were working on it, but no ETA. My neighbor has Qwest DSL and doesn't seem to have these problems. That seems strange. I go use her network when I absolutely must get online and mine is behaving badly. I can't tell if they're yanking my chain or not. Regardless, these speeds are crap. I'm paying for 7Mpbs but am lucky if I get 1/10th that in the evenings. My kids like to watch Netflix streaming movies, and it's just impossible after 5pm or so. Should I wait it out? Will complaining again produce any results? Should I change my subscription to a lower speed until they fix their end? Or switch to cable?

  Read the article

• All browsers refusing to load a specific image on a webpage?

  - by Johnson

  Out of nowhere today, all 3 of my browsers (FF/Chrome/IE, OS = Win7 x64) are refusing to load the homepage of interfacelift.com correctly. It works fine on other PC's in the house (on the same network), so it is definitely related to this one PC. The browser won't load the main image on the page correctly (even though the source code looks good), however if I direct the browser to the exact location of that image, then it displays fine. So obviously I can get the HTML index (which locates the resource) and I can get to the resource. So why heck isn't it displaying properly on the index page? It's almost as if the HTML rendering engine has gone bad, on all 3 browsers at once. I've browsed to a bunch of other sites (including sites very heavy on JS, with HTML much more complex than the one in question here) and am seeing nothing funny. Only thing wonky I've done with my PC in the past several hours was replacing the system file Magnifier.exe with a copy of cmd.exe while playing around with some of the ideas mentioned in this guide. However, I've since then restored the files to their previous state, and I don't know how Magnifier would be related to this even if I hadn't restored it. Any ideas? I'm stumped! EDIT: Here is what the broken page looks like in Chrome. And here is the image loaded correctly by itself.

  Read the article

• Mirror a Dropbox repository in Sharepoint and restrict access

  - by Dan Robson

  I'm looking for an elegant way to solve the following problem: My development team uses Dropbox for sharing documents amongst our immediate group. We'd like to put some of those documents into a SharePoint repository for the larger group to be able to access, as granting Dropbox access to the group at large is not ideal. However, we'd like to continue to be able to propagate changes to the SharePoint site simply by updating the files in Dropbox on our local client machines, and also vice versa - users granted access on SharePoint that update files in that workspace should be able to save their files and the changes should appear automatically on our client PC's. I've already done the organization of the folders so that in Dropbox, there exists a SharePoint folder that looks something like this: SharePoint ----Team --------Restricted Access Folders ----Organization --------Open Access Folders The Dropbox master account and the SharePoint master account are both set up on my file server. Unfortunately, Dropbox doesn't seem to allow syncing of folders anywhere above the \Dropbox\ part of the file system's hierarchy - or all I would have to do is find where the Sharepoint repository is maintained locally, and I'd be golden. So it seems I have to do some sort of 2-way synchronization between the Dropbox folder on the file server and the SharePoint folder on the file server. I messed around with Microsoft SyncToy, but it seems to be lacking in the area of real-time updating - and as much as I love rsync, I've had nothing but bad luck with it on Windows, and again, it has to be kicked off manually or through Task Scheduler - and I just have a feeling if I go down that route, it's only a matter of time before I get conflicts all over the place in either Dropbox, SharePoint, or both. I really want something that's going to watch both folders, and when one item changes, the other automatically updates in "real-time". It's quite possible I'm going down the entirely wrong route, which is why I'm asking the question. For simplicity's sake, I'll restate the goal: To be able to update Dropbox and have it viewable on the SharePoint site, or to update the SharePoint site and have it viewable in Dropbox. And since I'm a SharePoint noob, I'll also need help hiding the "Team" subfolder from everyone not in a specific group in AD.

  Read the article

• You need to format the disk in drive

  - by Sab

  I was copying some files over to my external hard disk and suddenly a message popped up saying that some file was open and it could not continue.It asks me whether I want to cancel the operation and I said cancel(The other operation was continue.) After that whenever I plug in the usb into the same computer it does not work. It keeps saying that I need to format the disk to continue. Luckily for me it opened on another computer and am backing up all my data. But now I am wondering why exactly this happened. Is it that the hard disk is weak. Also as an addon I currently use http://www.dtidata.com/windowssurfacescanner/ program to check for bad sectors. Is this the recommended way or is there some other better more reliable way to check if my hard disk is failing? Also could the above problem be because the hard disk is failing? If not why does it happen.Even if the hard disk is interrupted in the middle of a read write cycle doesnt there exist error handling code to enable gracefull recovery?

  Read the article

• Google Chrome not loading web pages correctly unless multiple refreshes

  - by Brandon Wilson

  Webpages in Google Chrome do not load correctly from time to time. I can't reproduce it, it just happens. Some times it happens when I load the browser other times it happens when I am just browsing. Just now I went to five different web sites which 3 out of 5 of them did not load correctly. I have attached a photo of how Super User loaded the first time I loaded it. If I refreshed it it will load correctly. Facebook is bad like this. Some times Facebook will load correctly but some of there back end scripting may not load so the page may not refresh automatically. Not sure what is going on. I have tried other browsers (Firefox and Internet Explorer) and they seem to be working correctly. Chrome seems to be acting up only on this computer. All my computers are running Windows 8 and I have removed Chrome completely off this computer and re-installed. I even disabled all extensions and cleared all the caches. I even tried running Chrome without being logged in. Not sure what else to do at this point. An example of superuser.com not loading correctly: When I refresh the problem will go away until it happens again. Sometimes it takes two or three refreshes in order for it to correctly load.

  Read the article

• Networkmapping script (VBS) Vista doesn't work, XP does

  - by The_cobra666

  Hi all, I've got a weird problem, (like always :p ) Okay: Situation: Windows 2003 domain with XP clients. With a GPO I'm running a VBS script on login to map a few drives. This works great on XP, but not on Vista. If I manually run the script after the user has logged on, it works. So I know the script works on Vista, it just doesn't run via the GPO. The user has admin privileges. I also have the same problem on Windows 7 RC1. So it must be related. The script: on error resume next Dim objNetwork Dim strDriveLetter, strRemotePath, strUserName strDriveLetter = "Z:" strRemotePath = "\\Onsgeluk.ons_geluk.local\Profieldoc" Set objNetwork = WScript.CreateObject("WScript.Network") strUserName = objNetwork.UserName objNetwork.RemoveNetworkDrive "Z:" objNetwork.MapNetworkDrive strDriveLetter, strRemotePath _ & "\" & strUserName objNetwork.RemoveNetworkDrive "X:" objNetwork.MapNetworkDrive "X:" , "\\Onsgeluk.ons_geluk.local\Data" objNetwork.RemoveNetworkDrive "Y:" objNetwork.MapNetworkDrive "Y:" , "\\Onsgeluk.ons_geluk.local\Mappen\hoofdverpleging" Does anyone have a clue? Thanks in advance guys (and girls) ps: sorry for my bad english!

  Read the article

• Opera 10.5 RAM usage and Google Reader?

  - by David

  Hi all, Today I upgraded to Opera 10.5 from Google Chrome and I have two really important questions about it. 1) Is it normal for it to use SO MUCH RAM!!!!? Closing tabs doesn't help, but opening new ones add on to the usage. I can have just 4 tabs open and it goes up to the 300MB mark and I only have 1.5GB in my laptop, 596MB of it used by the graphics card so this really unacceptable. Is there a way to fix it? 2) Why does Google Reader feel so slow and unresponsive on it? It lags so bad when I just try scrolling through the page. I know Opera is known for being really smooth while scrolling through pages. There's also a white bar at the bottom of the page that I can get rid of. It blocks the "Next" and "Previous" buttons. The test between articles is also sort of intersecting each other and that just looks completely unattractive and that's something i'm not used with any web browser. I realize there's a built-in RSS reader, but it doesn't sync across multiple computers and is very late at updating. Here are my specs: Windows 7 Ultimate (x86), Intel Pentium M 1.86 GHz, 1.5GB RAM, ATI Mobility Radeon X600 (64MB dedicated, 596MB shared)

  Read the article

• Managing a test iSCSI target server

  - by dyasny

  Hi all, I am using a RHEL server with a few hard drives, and tgtd as the iscsi target software. I a looking for a way to allocate and deallocate space and targets with that space, without restarting my system, or harming other LUNs. Currently, all my HDDs are PVs in a single VG, and I lvcreate/lvremove as required, and then export the allocated LVs using a tgt script: usr/sbin/tgtadm --lld iscsi --op new --mode target --tid=1 --targetname iqn.2001-04.com.lab.gss:300gb /usr/sbin/tgtadm --lld iscsi --op new --mode logicalunit --tid 1 --lun 1 -b /dev/mapper/iscsi_vg-iscsi_300Gb /usr/sbin/tgtadm --lld iscsi --op bind --mode target --tid 1 -I ALL /usr/sbin/tgtadm --lld iscsi --op new --mode target --tid=2 --targetname iqn.2001-04.com.lab.gss:200gb /usr/sbin/tgtadm --lld iscsi --op new --mode logicalunit --tid 2 --lun 1 -b /dev/mapper/iscsi_vg-iscsi_200Gb /usr/sbin/tgtadm --lld iscsi --op bind --mode target --tid 2 -I ALL /usr/sbin/tgtadm --lld iscsi --op new --mode target --tid=3 --targetname iqn.2001-04.com.lab.gss:100gb /usr/sbin/tgtadm --lld iscsi --op new --mode logicalunit --tid 3 --lun 1 -b /dev/mapper/iscsi_vg-iscsi_100Gb /usr/sbin/tgtadm --lld iscsi --op bind --mode target --tid 3 -I ALL tgtadm --mode target --op show So in order to remove a LUN, I stop the tgtd service, lvremove the lv, and remove the entry from the iscsi target script When I add a lun, I run lvcreate, and then add an entry to the script and run it. This is not quite optimal, since restarting the service is a bad idea while other LUNs are busy, so I am looking for a more scalable and safer way. Thanks

  Read the article

• Windows Server 2008 R2 DNS - One IP, multiple servers

  - by Blu Dragon

  I need opinions and examples on how to best to accomplish the setup I am looking for. I have a public-facing AD domain server with one public IP address. I have setup an external zone for example.com and I successfully have my own name servers pointing to it at ns0.example.com and ns1.example.com. I also have an internal zone for my private network at home.example.com. I am behind a router with the domain server in the DMZ. I want dev.example.com to be accessible from the outside world over https and to point to internal IP address 192.168.1.78. Likewise, I want www.example.com to be accessible from the outside world and point to internal IP address 192.168.1.79. Both dev and www servers are CentOS 5.6 VMs running inside of Hyper-V on the domain server (bad idea I know but I am limited on hardware atm). What is best way to achieve this? From what I have read and researched on Google, I may need to setup a reverse proxy but I am not sure how well that will work with SSL.

  Read the article

• Firebird database corruption causes

  - by Rytis

  I am running several different Firebird versions (2.0, 2.1) on multiple entry level Windows-based servers with wildly varying hardware. The only matching thing between them is that they are running same home built application with the same database structure. Lately I've been seeing massive slowdowns on multiple servers. Turns out that database gets corrupted, so each time it breaks, I get to mend, backup and restore the database, and it all is fine for some time (1-2 weeks), and then it repeats once again. Thankfully, I haven't seen any data loss or damage... yet. The thing is that every such downtime results in lost productivity, and often quite some driving for me as some of the databases are in remote locations. I've been trying to find out what's causing the corruption, but I haven't been able to. The fact that it's running on different hardware hints that it should not be a hardware based problem. If we rule out hardware issues, I have a bad feeling that it's a bug in Firebird as I'm not doing anything fancy via SQL. Do you have any idea how to find out exactly what's causing the corruption and hopefully fix the problem?

  Read the article

• IIS High use & Server Performance issues

  - by HaydnWVN

  Have an SBS2011 running Exchange, a database app and a few other things serving 5 users (3 low use, 1 high). The server was never specced for the database app so it isn't as powerful as I'd like... Only 12GB RAM. We have increasingly found performance problems with this server, last week it was so bad I couldn't even connect remotely. To free up some available RAM I have (over the past month or so): Restricted the Exchange Message Store to 1GB with (so far) no ill effects. Restricted SQL Databases (including SBSMonitoring and Sharepoint/##SSEE (Which isn't used)). Now I am finding that IIS Worker threads are using up the available memory and I have (so far) been unable to track down much useful information about restricting them. This server is not 'serving' anything web-based apart from OWA that I am finding people using because Outlook is so slow (again related to the Servers performance). I am aware that Exchange on SBS2011 is designed to use up available resources (and concede when other applications request). But it is not doing so (or anywhere near fast enough) for our needs. Opening the database application (using Postgres) takes 5+ minutes from client machines and regularly times out or crashes due to this. After a reboot (before SQL/Exchange/IIS databases are very large/totally cached) we get the performace we need and expect. Previously a reboot once a month was enough... Then once a week... Now they have taken to rebooting it almost daily!

  Read the article

• Apache wont start after attempting to install SSL

  - by yummm

  Below is what my VirtualHosts look like in httpd.conf <VirtualHost *:80> # Admin email, Server Name (domain name) and any aliases ServerAdmin [email protected] ServerName mydomain.com ServerAlias www.mydomain.com # Index file and Document Root (where the public files are located) DirectoryIndex index.php DocumentRoot /home/mydomain/public_html/mydomain.com/public # Custom log file locations LogLevel warn ErrorLog /home/mydomain/public_html/mydomain.com/log/error.log CustomLog /home/mydomain/public_html/mydomain.com/log/access.log combined </VirtualHost> <VirtualHost *:443> SSLEngine on SSLCertificateFile /etc/httpd/conf/ssl.crt/mydomain.com.crt SSLCertificateKeyFile /etc/httpd/conf/ssl.key/mydomain.com.key ServerName mydomain.com DirectoryIndex index.php DocumentRoot /home/mydomain/public_html/mydomain.com/public </VirtualHost> I'm using the latest version of Apache on CentOS and there isn't any error being generated. Apache just will not start. Any ideas what I'm doing wrong? UPDATE - Found these messages in the error log: [Tue Mar 16 02:07:57 2010] [error] Init: Private key not found [Tue Mar 16 02:07:57 2010] [error] SSL Library Error: 218710120 error:0D094068:asn1 encoding routines:d2i_ASN1_SET:bad tag [Tue Mar 16 02:07:57 2010] [error] SSL Library Error: 218529960 error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag [Tue Mar 16 02:07:57 2010] [error] SSL Library Error: 218595386 error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error [Tue Mar 16 02:07:57 2010] [error] SSL Library Error: 218734605 error:0D09A00D:asn1 encoding routines:d2i_PrivateKey:ASN1 lib

  Read the article

• mpirun -np N, what if N is larger than my core number?

  - by Daniel

  Say I have a 4-core workstation, what would linux (Ubuntu) do if I execute mpirun -np 9 XXX Q1. Will 9 run immediately together, or they will run 4 after 4? Q2. I suppose that using 9 is not good, because the remainder 1, it will make the computer confused, (I don't know is it going to be confused at all, or the "head" of the computer will decide which core among the 4 cores will be used?) Or it will be randomly picked. Who decide which one core to call? Q3. If I feel my cpu is not bad and my ram is okay and large enough, and my case is not very big. Is it a good idea in order to fully use my cpu and ram, that I do mpirun -np 8 XXX, or even mpirun -np 12 XXX. Q4. Who decides all of these effciency optimization, Ubuntu, or linux, or motherboard or cpu? Your enlightenment would be really appreciated.

  Read the article

• GNU screen multiuser mode is broken in OS X 10.6 (Snow Leopard)

  - by schustafa

  I'm using GNU screen for remote pair programming. Let's call the local account for the remote user 'pairpair'. I have the following lines in my .screenrc: multiuser on acladd pairpair I have run sudo chmod u+s /usr/bin/screen. However, when the remote user tries to connect to my screen with the command screen -r [my_account_name]/[pid_of_screen] I receive the following message: Attach attempt with bad pid(xxx) The pid listed in the error message matches the pid of the screen process run by the remote user. The remote user's screen process hangs; my screen session continues happily along after the error message disappears. I've tried using both the built-in screen (at /usr/bin/screen) and the screen available from MacPorts, but I get the same error in both cases. This worked on OS X 10.5 (Leopard). I've googled around for the error message, but most of the hits relate to some BSD bug from 2003 or so (which was fixed). Has anyone else seen this behavior? Does anyone have any idea how to make multiuser support in screen work in SL?

  Read the article

• Acronis Disk Director AFTER Clone Disk error: PXE-E61: Media test failure, check cable

  - by Kairan

  Used Acronis Disk Director on my desktop, plugged in the laptop drive 240GB SSD (USB) and the new hard drive 500GB SSD (usb) and the copy seemed to be fine. I didnt see any error messages but I didnt stare at it for 3 hours either. The clone disk of course the Toshiba hidden restore partition, the primary partition C drive and the active (boot?) partition and yes, did check box for copy NT signature. The computer boots up fine most of the time, but it seems that when the computer goes to sleep (i believe its sleep, hard to do much testing during school) or hibernate or reboot it will sometimes display this message: Intel(R) Boot Agent GE v1.3.52 Copyright (C) 1997-2010, Intel Corporation PXE-E61: Media test failure, check cable PXE-M0F: Exiting Intel Boot Agent Insert system disk in drive. Press any key when ready... Of course any key does nothing but repeat a similar method. However, if I press the power button on the laptop (Toshiba Portege R705, Win 7 Pro 64-bit) it puts computer into hibernate. After hibernating I press power button again and it comes out of hibernation without any odd messages or problems described above... so apparently that is my TEMP fix. Another recent issue I noticed is on occasion when creating a new folder or modifying something in the system variables, other random areas I will get a message: "The Stub received bad data" and simply retry the task and it works. Perhaps these two issues are linked.

  Read the article

• USB mouse disconnecting and reconnecting in windows and linux

  - by Kalak

  I have a problem similar to what is described at "Why is my USB mouse disconnecting and reconnecting randomly and often?" except is is happening in both Windows 7 and Linux (Ubuntu 12/04TLS, fully patched), multiple mice, multiple OSs. It stops responding to input for about 3-5 seconds, then starts responding again. It's more frequent and lasts longer when running games (TF2, L4D, Dishonored, Borderlands 2, and more), but happens when just running the OS as well. I was hoping it was the motherboard so I bought a USB 2.0 PCI card to try that, but it's still happening. I've stripped it down to just the keyboard and mouse (different keyboard too just in case the keyboard was the problem), but it's still happening. All the hardware (mice and keyboards) work fine on other computers. I have literally pulled the mouse and keyboard out and plugged them into another computer (laptop) and re-joined the online game and had no problem with the keyboard and mouse combo that just failed on my gaming rig. Please no driver / Windows or Linux only suggestions, as that wouldn't effect both OSs. edit: known good mice I've brought home are now going bad. I suspect the hardware is messed up (voltage?) and has been frying the mice.

  Read the article

• "Open file location" is broken for Win Live Photo Gallery and Chrome

  - by Arnold Spence

  Symptoms: Windows Live Photo Gallery: Right clicking on an image (.jpg, .png) and selecting the context menu item "Open file location" should open the containing folder in explorer. Instead, I get an error dialog stating "This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel." Chrome: After downloading a file (of any type), clicking the down arrow on the download status bar at the bottom and clicking "Show in folder" results in the same error dialog mentioned above. I'm using Windows 7. I'm pretty sure this is a registry entry gone bad but I've been unable to locate any information about this specific problem. It's not a file type association problem as I am not trying to open the files concerned, I'm trying to open an explorer window at the location for the file. I've found a similar issue that somebody had with explorer itself. However, the suggested registry fixes here for "Folder", "Directory" and "Drive" did not solve the problem. Also, If I use the searchbar in explorer to do a search, right click on a file and choose "Open file location", explorer jumps to that location without any trouble. I have not yet identified other programs with this issue.

  Read the article

• Hostname and SSL (apache) issue on Debian

  - by user105566

  I have been trying to setup SSL virtual host ServerAdmin [email protected] ServerName moclm.tap.pt DocumentRoot /var/www/tapme/ <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> <Directory /var/www/tapme/> Options -Indexes FollowSymLinks MultiViews AllowOverride All #Order allow,deny #allow from all </Directory> SSLEngine on SSLCertificateFile /etc/ssl/moclm.cer SSLCertificateKeyFile /etc/ssl/moclm.pem </VirtualHost> For some reason, the server automatically redirect to SSL (http:// to https://). The apache is not configured to redirect and application was working fine on port 80 only. I have no knowledge how the internal network works as i am working remotely. The SSL error logs show: [Tue Oct 02 22:40:32 2012] [error] Hostname linemnt01.tap.pt provided via SNI and hostname moclm.tap.pt provided via HTTP are different I thought may be the hostname has some issue and have changed the hostname of the server from "linemnt01.tap.pt" to "moclm.tap.pt" but the issue is still there. I am getting the following error on browser: Bad Request Your browser sent a request that this server could not understand. i have /etc/hosts: 127.0.0.1 localhost.localdomain localhost moclm.tap.pt moclm and openssl returns: openssl verify -CAfile cert-CA.cer moclm.cer moclm.tap.pt.cer: OK I have been trying to troubleshoot the issue but no luck. Need help Thanks

  Read the article

• How to eliminate the downtime when a dynamic IP address changes?

  - by xenon

  We currently have a number of client computers linked up to a database server (MS SQL 2008) for replication. The database server recognises the computers based on their Windows hostname. We are using dynamic IP addresses at this time because we tend to change the computers’ hardware quite frequently, and so the MAC address may be different. Unless static IP has a good way for us to manage frequent changing of MAC addresses, we are keeping it to dynamic IP. The problem with dynamic IP addresses, however, is that when a client fetches an new IP from the DHCP, ie, there is a change in the IP address, there is going to have a downtime for the hostname to reflect the new IP address, the client’s DNS cache of the hostname to reload, and also the server’s DNS cache to reload to see the new IP from the hostname. All of these have different timings and the delay can be really bad at times. Restarting the computer doesn't work all the time too. The clients are on Windows 7. How can I eliminate the amount of downtime required when there is a change in IP in the case of dynamic IP addresses?

  Read the article

• Chipset fan on the frtiz - compressed air hasn't fixed anything - is there anything I can do?

  - by Anthony

  Yesterday, my computer started to make an annoying whining noise. Knowing that this is likely a fan issue, I opened the case and proceeded to determine which fan was causing the issue. I got some compressed air and tried cleaning out the dust around it (and the rest of the computer while I was at it). This hasn't seemed to fix the issue. Now, if it were just any fan, I would probably just replace the fan - they're relatively cheap after all. However, this is a special fan. Aside: For what its worth, I feel bad that the graphics card blocks part of the fan, but it is the only slot the graphics card fits, so I had no choice. After pulling out my motherboard user guide, it looks like this is a fan placed directly on top of the chipset. To be perfectly honest, I have no clue what the purpose of the chipset is - but it sounds important. After some quick research, I see that it is responsible for providing the bridge between my CPU, RAM and graphics, among other things. Just a quick search at Newegg tells me that chipset fans can be purchased at pretty reasonable prices (< 20 dollars). Is it practical to replace this fan? It is an old computer as computers go and I wouldn't be terribly upset to upgrade the motherboard and processor, so perhaps this is a sign. Hardware Specs: Motherboard: Asus A8N-E Chipset: NVIDIA nForce4 Ultra

  Read the article

< Previous Page | 227 228 229 230 231 232 233 234 235 236 237 238  | Next Page >