Search Results

Search found 6580 results on 264 pages for 'require'.

Page 231/264 | < Previous Page | 227 228 229 230 231 232 233 234 235 236 237 238  | Next Page >

• Windows for IoT, continued

  - by Valter Minute

  Originally posted on: http://geekswithblogs.net/WindowsEmbeddedCookbook/archive/2014/08/05/windows-for-iot-continued.aspxI received many interesting feedbacks on my previous blog post and I tried to find some time to do some additional tests. Bert Kleinschmidt pointed out that pins 2,3 and 10 of the Galileo are connected directly to the SOC, while pin 13, the one used for the sample sketch is controlled via an I2C I/O expander. I changed my code to use pin 2 instead of 13 (just changing the variable assignment at the beginning of the code) and latency was greatly reduced. Now each pulse lasts for 1.44ms, 44% more than the expected time, but ways better that the result we got using pin 13. I also used SetThreadPriority to increase the priority of the thread that was running the sketch to THREAD_PRIORITY_HIGHEST but that didn't change the results. When I was using the I2C-controlled pin I tried the same and the timings got ways worse (increasing more than 10 times) and so I did not commented on that part, wanting to investigate the issua a bit more in detail. It seems that increasing the priority of the application thread impacts negatively the I2C communication. I tried to use also the Linux-based implementation (using a different Galileo board since the one provided by MS seems to use a different firmware) and the results of running the sample blink sketch modified to use pin 2 and blink the led for 1ms are similar to those we got on the same board running Windows. Here the difference between expected time and measured time is worse, getting around 3.2ms instead of 1 (320% compared to 150% using Windows but far from the 100.1% we got with the 8-bit Arduino). Both systems were not under load during the test, maybe loading some applications that use part of the CPU time would make those timings even less reliable, but I think that those numbers are enough to draw some conclusions. It may not be worth running a full OS if what you need is Arduino compatibility. The Arduino UNO is probably the best Arduino you can find to perform this kind of development. The Galileo running the Linux-based stack or running Windows for IoT is targeted to be a platform for "Internet of Things" devices, whatever that means. At the moment I don't see the "I" part of IoT. We have low level interfaces (SPI, I2C, the GPIO pins) that can be used to connect sensors but the support for connectivity is limited and the amount of work required to deliver some data to the cloud (using a secure HTTP request or a message queuing system like APMQS or MQTT) is still big and the rich OS underneath seems to not provide any help doing that.Why should I use sockets and can't access all the high level connectivity features we have on "full" Windows?I know that it's possible to use some third party libraries, try to build them using the Windows For IoT SDK etc. but this means re-inventing the wheel every time and can also lead to some IP concerns if used for products meant to be closed-source. I hope that MS and Intel (and others) will focus less on the "coolness" of running (some) Arduino sketches and more on providing a better platform to people that really want to design devices that leverage internet connectivity and the cloud processing power to deliver better products and services. Providing a reliable set of connectivity services would be a great start. Providing support for .NET would be even better, leaving native code available for hardware access etc. I know that those components may require additional storage and memory etc. So making the OS componentizable (or, at least, provide a way to install additional components) would be a great way to let developers pick the parts of the system they need to develop their solution, knowing that they will integrate well together. I can understand that the Arduino and Raspberry Pi* success may have attracted the attention of marketing departments worldwide and almost any new development board those days is promoted as "XXX response to Arduino" or "YYYY alternative to Raspberry Pi", but this is misleading and prevents companies from focusing on how to deliver good products and how to integrate "IoT" features with their existing offer to provide, at the end, a better product or service to their customers. Marketing is important, but can't decide the key features of a product (the OS) that is going to be used to develop full products for end customers integrating it with hardware and application software. I really like the "hackable" nature of open-source devices and like to see that companies are getting more and more open in releasing information, providing "hackable" devices and supporting developers with documentation, good samples etc. On the other side being able to run a sketch designed for an 8 bit microcontroller on a full-featured application processor may sound cool and an easy upgrade path for people that just experimented with sensors etc. on Arduino but it's not, in my humble opinion, the main path to follow for people who want to deliver real products.   *Shameless self-promotion: if you are looking for a good book in Italian about the Raspberry Pi , try mine: http://www.amazon.it/Raspberry-Pi-alluso-Digital-LifeStyle-ebook/dp/B00GYY3OKO

  Read the article

• VirtualBox appliance for the Oracle Communications Service Delivery Platform (SDP) Products

  - by chlander

  It's been quite awhile since we last blogged. This blog is written by Leif Lourie, a Curriculum Developer for the Oracle Communications Service Delivery Platform (SDP) products. For the last 8 years, Leif has worked as a Curriculum Developer for many of the telecom-oriented products that Oracle offers. He has been working in the telecom industry for about 25 years and has also worked as a software developer, project manager, and solutions architect. He is currently working on courseware for an upcoming release for one of the Service Delivery Platform products. Thanks to Leif not only for this blog, but for making the VM described in the blog available. Cheryl Lander, Oracle Communications InfoDev Senior Director To be able to download, install and test a product within a day is many times very important for people that are doing the primary evaluation of a software product. If it takes longer, it will require a bigger effort, like a proof-of-concept project with many people involved. Of course, if the product is chosen for a more thorough test, it will probably happen anyway, but then maybe with focus on integration instead of product features. We have a long tradition of creating complex software that is easy to install and test and we have often been praised for the ease of getting our products up and running. One key for this has been that there has always been an installer for Windows, as well as for the production environments that usually are Unix and Linux. And, the windows installer has, in most cases, been released for developing and testing purposes. Lately, this has changed. Our products are very seldom released for the Windows platform, at all. And even the Linux versions are almost always released for 64-bit systems. This is creating problems for many of the people that want to try out our products, since few have access to a 64-bit Linux system of the right platform. Most of us are using a laptop with Windows or Mac OS. Some of us are using Linux or Solaris, but probably a non certified distribution for the product you want to test. My job, among other things, is to develop hands-on practices for our products. For me, it is crucial to have access to environments for installing and using our products. For this reason I have been using virtual machines for many years.I have a ready-made base system, with the necessary tools installed for all the products I create hands-on practices for. Whenever I start working on hands-on practices for a new product or a new version, I just copy the base system and start working with a clean slate. This saves me a lot of time! Now, I would like to start saving time for my favorite student: You! If you are using our products and regularly test new versions you might benefit from the virtual machine that is now available on Oracle Technology Network: The Virtual Machine for the Oracle Communications Service Delivery Platform (SDP) Products. This virtual machine contains an installation of the 64-bit version of Oracle Enterprise Linux, version 6. It also has Oracle Database Express Edition (XE), Oracle Java and Oracle Enterprise Pack for Eclipse installed. By using Oracle VM VirtualBox you may use Windows, OS X, Linux or Solaris on your laptop. VirtualBox can be installed on top of any of these platforms and give you the ability to run virtual machines in your laptop. After downloading and starting the virtual machine you will also need to download the installation files for the product you want to test; for example Oracle Communications Services Gatekeeper or Oracle Communications Online Mediation Controller. In some cases there are lessons and practices available for the products. The freely available courses are listed in Oracle Learning Library as a Collection of Oracle Communications Service Delivery Platform Courses. As time goes by, we will make this list collection bigger. Also, the goal is to update the virtual machine about one to two times per year. So you will always be able to get a well maintained virtual machine for the Service Delivery Platform products from us. We Value Your Feedback If you would like to suggest improvements or report issues on any of the product documentation, curriculum, or training produced by the Oracle Communications Information Development team, you can use these channels: Email [email protected]. Post a comment on this blog. Thanks for reading!

  Read the article

• BizTalk: Sample: Context routing and Throttling with orchestration

  - by Leonid Ganeline

  The sample demonstrates using orchestration for throttling and using context routing. Usually throttling is implemented on the host level (in BizTalk 2010 we can also using the host instance level throttling). Here is demonstrated the throttling with orchestration convoy that slows down message flow from some customers. Sample implements sort of quality service agreement layer for different kind of customers. The sample demonstrates the context routing between orchestrations. It has several advantages over the content routing. For example, we don’t have to create the property schema and promote properties on the schemas; we don’t have to change the message content to change routing. Use case:  The BizTalk application has a main processing orchestration that process all input messages. The application usually works as an OLTP application. Input messages came in random order without peaks, typical scenario for the on-line users. But sometimes the big data batch payloads come. These batches overload processing orchestrations. All processes, activated by on-line users after the payload, come to the same queue and are processed only after the payload. Result is on-line users can see significant delay in processing. It can be minutes or hours, depending of the batch size. Requirements: On-line user’s processing should work without delays. Big batches cannot disturb on-line users. There should be higher priority for the on-line users and the lower priority for the batches. Design: Decision is to divide the message flow in two branches, one for on-line users and second for batches. Branch with batches provides messages to the processing line with low priority, and the on-line user’s branch – with high priority. All messages are provided by hi-speed receive port. BTS.ReceivePortName context property is used for routing. The Router orchestration separates messages sent from on-line users and from the batch messages. But the Router does not use the BizTalk provided value of this property, the Router set up this value by itself. Router uses the content of the messages to decide if it is from on-line users or from batches. The message context property the BTS.ReceivePortName is changed respectively, its value works as a recipient address, as the “To” address for the next recipient orchestrations. Those next orchestrations are the BatchBottleneck and the MainProcess orchestrations. Messages with context equal “ToBatch” are filtered up by the BatchBottleneck orchestration. It is a unified convoy orchestration and it throttles the message flow, delaying the message delivery to the MainProcess orchestration. The BatchBottleneck orchestration changes the message context to the “ToProcess” and sends messages one after another with small delay in between. Delay can be configured in the BizTalk config file as:                 <appSettings>                                 <add key="GLD_Tests_TwoWayRouting_BatchBottleneck_DelayMillisec" value="100"/>                 </appSettings>   Of course, messages with context equal “ToProcess” are filtered up by the MainProcess orchestration.   NOTES: Filters with string values: In Orchestrations (the first Receive shape in orchestration) use string values WITH quotes; in Send Ports use string values WITHOUT quotes. Filters on the Send Ports are dynamic; we can change them in run-time. Filters on the Orchestrations are static; we can change them only in design-time. To check the existence of the promoted property inside orchestration use the Expression shape with construction like this:       if (BTS.ReceivePortName exists myMessage) { …; } It is not possible in the Message Assignment shape because using the “if” statement inside Message Assignment is prohibited. Several predefined context properties can behave in specific way. Say MessageTracking.OriginatingMessage or XMLNORM.DocumentSpecName, they are required some internal rules should be applied to the format or usage of this properties. MessageTracking.* parameters require you have to use tracking and you can get unexpected run-time errors in some cases. My recommendation is - use very limited set of the predefined context properties. To “attach” the new promoted property to the message, we have to use correlation. The correlation type should include this property. [Here is a good explanation by Saravana ] The sample code is here [sorry, temporary trubles with CodePlex].

  Read the article

• Mobile Apps for Oracle E-Business Suite

  - by Carlos Chang

  Crosspost from the mobile apps blog.  TL;DR Oracle E-Business Suite is now building mobile apps with Oracle Mobile Application Framework (MAF). Believe it! Build iOS and Android apps with once code base and get it done! By Steven Chan (Oracle Development)  Many things have changed in the mobile space over the last few years. Here's an update on our strategy for mobile apps for the E-Business Suite. Mobile app strategy We're building our family of mobile apps for the E-Business Suite using Oracle Mobile Application Framework.  This framework allows us to write a single application that can be run on Apple iOS and Google Android platforms. Mobile apps for the E-Business Suite will share a common look-and-feel. The E-Business Suite is a suite of over 200 product modules spanning Financials, Supply Chain, Human Resources, and many other areas. Our mobile app strategy is to release standalone apps for specific product modules.  Our Oracle Timecards app, which allows users to create and submit timecards, is an example of a standalone app. Some common functions that span multiple product areas will have dedicated apps, too. An example of this is ourOracle Approvals app, which allows users to review and approve requests for expenses, requisitions, purchase orders, recruitment vacancies and offers, and more. You can read more about our Oracle Mobile Approvals app here: Now Available: Oracle Mobile Approvals for iOS Our goal is to support smaller screen (e.g. smartphones) as well as larger screens (e.g. tablets), with the smaller screen versions generally delivered first.  Where possible, we will deliver these as universal apps.  An example is our Oracle Mobile Field Service app, which allows field service technicians to remotely access customer, product, service request, and task-related information.  This app can run on a smartphone, while providing a richer experience for tablets. Deploying EBS mobile apps The mobile apps, themselves (i.e. client-side components) can be downloaded by end-users from the Apple iTunes today.  Android versions will be available from Google play. You can monitor this blog for Android-related updates. Where possible, our mobile apps should be deployable with a minimum of server-side changes.  These changes will generally involve a consolidated server-side patch for technology-stack components, and possibly a server-side patch for the functional product module. Updates to existing mobile apps may require new server-side components to enable all of the latest mobile functionality. All EBS product modules are certified for internal intranet deployments (i.e. used by employees within an organization's firewall).  Only a subset of EBS products such as iRecruitment are certified to be deployed externally (i.e. used by non-employees outside of an organization's firewall).  Today, many organizations running the E-Business Suite do not expose their EBS environment externally and all of the mobile apps that we're building are intended for internal employee use.  Recognizing this, our mobile apps are currently designed for users who are connected to the organization's intranet via VPN.  We expect that this may change in future updates to our mobile apps. Mobile apps and internationalization The initial releases of our mobile apps will be in English.  Later updates will include translations for all left-to-right languages supported by the E-Business Suite.  Right-to-left languages will not be translated. Customizing apps for enterprise deployments The current generation of mobile apps for Oracle E-Business Suite cannot be customized. We are evaluating options for limited customizations, including corporate branding with logos, corporate color schemes, and others. This is a potentially-complex area with many tricky implications for deployment and maintenance.  We would be interested in hearing your requirements for customizations in enterprise deployments.Prerequisites Apple iOS 7 and higher Android 4.1 (API level 16) and higher, with minimum CPU/memory configurations listed here EBS 12.1: EBS 12.1.3 Family Packs for the related product module EBS 12.2.3 References Oracle E-Business Suite Mobile Apps, Release 12.1 and 12.2 Documentation (Note 1641772.1) Oracle E-Business Suite Mobile Apps Administrator's Guide, Release 12.1 and 12.2 (Note 1642431.1) Follow @OracleMobile on Twitter Oracle Mobile Blog is here. 

  Read the article

• concurrency::index<N> from amp.h

  - by Daniel Moth

  Overview C++ AMP introduces a new template class index<N>, where N can be any value greater than zero, that represents a unique point in N-dimensional space, e.g. if N=2 then an index<2> object represents a point in 2-dimensional space. This class is essentially a coordinate vector of N integers representing a position in space relative to the origin of that space. It is ordered from most-significant to least-significant (so, if the 2-dimensional space is rows and columns, the first component represents the rows). The underlying type is a signed 32-bit integer, and component values can be negative. The rank field returns N. Creating an index The default parameterless constructor returns an index with each dimension set to zero, e.g. index<3> idx; //represents point (0,0,0) An index can also be created from another index through the copy constructor or assignment, e.g. index<3> idx2(idx); //or index<3> idx2 = idx; To create an index representing something other than 0, you call its constructor as per the following 4-dimensional example: int temp[4] = {2,4,-2,0}; index<4> idx(temp); Note that there are convenience constructors (that don’t require an array argument) for creating index objects of rank 1, 2, and 3, since those are the most common dimensions used, e.g. index<1> idx(3); index<2> idx(3, 6); index<3> idx(3, 6, 12); Accessing the component values You can access each component using the familiar subscript operator, e.g. One-dimensional example: index<1> idx(4); int i = idx[0]; // i=4 Two-dimensional example: index<2> idx(4,5); int i = idx[0]; // i=4 int j = idx[1]; // j=5 Three-dimensional example: index<3> idx(4,5,6); int i = idx[0]; // i=4 int j = idx[1]; // j=5 int k = idx[2]; // k=6 Basic operations Once you have your multi-dimensional point represented in the index, you can now treat it as a single entity, including performing common operations between it and an integer (through operator overloading): -- (pre- and post- decrement), ++ (pre- and post- increment), %=, *=, /=, +=, -=,%, *, /, +, -. There are also operator overloads for operations between index objects, i.e. ==, !=, +=, -=, +, –. Here is an example (where no assertions are broken): index<2> idx_a; index<2> idx_b(0, 0); index<2> idx_c(6, 9); _ASSERT(idx_a.rank == 2); _ASSERT(idx_a == idx_b); _ASSERT(idx_a != idx_c); idx_a += 5; idx_a[1] += 3; idx_a++; _ASSERT(idx_a != idx_b); _ASSERT(idx_a == idx_c); idx_b = idx_b + 10; idx_b -= index<2>(4, 1); _ASSERT(idx_a == idx_b); Usage You'll most commonly use index<N> objects to index into data types that we'll cover in future posts (namely array and array_view). Also when we look at the new parallel_for_each function we'll see that an index<N> object is the single parameter to the lambda, representing the (multi-dimensional) thread index… In the next post we'll go beyond being able to represent an N-dimensional point in space, and we'll see how to define the N-dimensional space itself through the extent<N> class. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• jqGrid - dynamically load different drop down values for different rows depending on another column value

  - by Renso

  Goal: As we all know the jqGrid examples in the demo and the Wiki always refer to static values for drop down boxes. This of course is a personal preference but in dynamic design these values should be populated from the database/xml file, etc, ideally JSON formatted. Can you do this in jqGrid, yes, but with some custom coding which we will briefly show below (refer to some of my other blog entries for a more detailed discussion on this topic). What you CANNOT do in jqGrid, referrign here up and to version 3.8.x, is to load different drop down values for different rows in the jqGrid. Well, not without some trickery, which is what this discussion is about. Issue: Of course the issue is that jqGrid has been designed for high performance and thus I have no issue with them loading a  reference to a single drop down values list for every column. This way if you have 500 rows or one, each row only refers to a single list for that particuolar column. Nice! SO how easy would it be to simply traverse the grid once loaded on gridComplete or loadComplete and simply load the select tag's options from scratch, via ajax, from memory variable, hard coded etc? Impossible! Since their is no embedded SELECT tag within each cell containing the drop down values (remeber it only has a reference to that list in memory), all you will see when you inspect the cell prior to clicking on it, or even before and on beforeEditCell, is an empty <TD></TD>. When trying to load that list via a click event on that cell will temporarily load the list but jqGrid's last internal callback event will remove it and replace it with the old one, and you are back to square one. Solution: Yes, after spending a few hours on this found a solution to the problem that does not require any updates to jqGrid source code, thank GOD! Before we get into the coding details, the solution here can of course be customized to suite your specific needs, this one loads the entire drop down list that would be needed across all rows once into global variable. I then parse this object that contains all the properties I need to filter the rows depending on which ones I want the user to see based off of another cell value in that row. This only happens when clicking the cell, so no performance penalty. You may of course to load it via ajax when the user clicks the cell, but I found it more effecient to load the entire list as part of jqGrid's normal editoptions: { multiple: false, value: listingStatus } colModel options which again keeps only a reference to the sinlge list, no duplciation. Lets get into the meat and potatoes of it.         var acctId = $('#Id').val();         var data = $.ajax({ url: $('#ajaxGetAllMaterialsTrackingLookupDataUrl').val(), data: { accountId: acctId }, dataType: 'json', async: false, success: function(data, result) { if (!result) alert('Failure to retrieve the Alert related lookup data.'); } }).responseText;         var lookupData = eval('(' + data + ')');         var listingCategory = lookupData.ListingCategory;         var listingStatus = lookupData.ListingStatus;         var catList = '{';         $(lookupData.ListingCategory).each(function() {             catList += this.Id + ':"' + this.Name + '",';         });         catList += '}';         var lastsel;         var ignoreAlert = true;         $(item)         .jqGrid({             url: listURL,             postData: '',             datatype: "local",             colNames: ['Id', 'Name', 'Commission<br />Rep', 'Business<br />Group', 'Order<br />Date', 'Edit', 'TBD', 'Month', 'Year', 'Week', 'Product', 'Product<br />Type', 'Online/<br />Magazine', 'Materials', 'Special<br />Placement', 'Logo', 'Image', 'Text', 'Contact<br />Info', 'Everthing<br />In', 'Category', 'Status'],             colModel: [                 { name: 'Id', index: 'Id', hidden: true, hidedlg: true },                 { name: 'AccountName', index: 'AccountName', align: "left", resizable: true, search: true, width: 100 },                 { name: 'OnlineName', index: 'OnlineName', align: 'left', sortable: false, width: 80 },                 { name: 'ListingCategoryName', index: 'ListingCategoryName', width: 85, editable: true, hidden: false, edittype: "select", editoptions: { multiple: false, value: eval('(' + catList + ')') }, editrules: { required: false }, formatoptions: { disabled: false} }             ],             jsonReader: {                 root: "List",                 page: "CurrentPage",                 total: "TotalPages",                 records: "TotalRecords",                 userdata: "Errors",                 repeatitems: false,                 id: "0"             },             rowNum: $rows,             rowList: [10, 20, 50, 200, 500, 1000, 2000],             imgpath: jQueryImageRoot,             pager: $(item + 'Pager'),             shrinkToFit: true,             width: 1455,             recordtext: 'Traffic lines',             sortname: 'OrderDate',             viewrecords: true,             sortorder: "asc",             altRows: true,             cellEdit: true,             cellsubmit: "remote",             cellurl: editURL + '?rows=' + $rows + '&page=1',             loadComplete: function() {               },             gridComplete: function() {             },             loadError: function(xhr, st, err) {             },             afterEditCell: function(rowid, cellname, value, iRow, iCol) {                 var select = $(item).find('td.edit-cell select');                 $(item).find('td.edit-cell select option').each(function() {                     var option = $(this);                     var optionId = $(this).val();                     $(lookupData.ListingCategory).each(function() {                         if (this.Id == optionId) {                                                       if (this.OnlineName != $(item).getCell(rowid, 'OnlineName')) {                                 option.remove();                                 return false;                             }                         }                     });                 });             },             search: true,             searchdata: {},             caption: "List of all Traffic lines",             editurl: editURL + '?rows=' + $rows + '&page=1',             hiddengrid: hideGrid   Here is the JSON data returned via the ajax call during the jqGrid function call above (NOTE it must be { async: false}: {"ListingCategory":[{"Id":29,"Name":"Document Imaging & Management","OnlineName":"RF Globalnet"} ,{"Id":1,"Name":"Ancillary Department Hardware","OnlineName":"Healthcare Technology Online"} ,{"Id":2,"Name":"Asset Tracking","OnlineName":"Healthcare Technology Online"} ,{"Id":3,"Name":"Asset Tracking","OnlineName":"Healthcare Technology Online"} ,{"Id":4,"Name":"Asset Tracking","OnlineName":"Healthcare Technology Online"} ,{"Id":5,"Name":"Document Imaging & Management","OnlineName":"Healthcare Technology Online"} ,{"Id":6,"Name":"Document Imaging & Management","OnlineName":"Healthcare Technology Online"} ,{"Id":7,"Name":"EMR/EHR Software","OnlineName":"Healthcare Technology Online"}]} I only need the Id and Name for the drop down list, but the third column in the JSON object is important, it is the only that I match up with the OnlineName in the jqGrid column, and then in the loop during afterEditCell simply remove the ones I don't want the user to see. That's it!

  Read the article

• #OOW 2012 @PARIS...talking Oracle and Clouds, and Optimized Datacenter

  - by Eric Bezille

  For those of you who want to get most out of Oracle technologies to evolve your IT to the Next Wave, I encourage you to register to the up coming Oracle Optimized Datacenter event that will take place in Paris on November 28th. You will get the opportunity to exchange with Oracle experts and customers having successfully evolve their IT by leveraging Oracle technologies. You will also get the latest news on some of the Oracle systems announcements made during OOW 2012. During this event we will make an update about Oracle and Clouds, from private to public and hybrid models. So in preparing this session, I thought it was a good start to make a status of Cloud Computing in France, and CIO requirements in particular. Starting in 2009 with the first Cloud Camp in Paris, the market has evolved, but the basics are still the same : think hybrid. From Traditional IT to Clouds One size doesn't fit all, and for big companies having already an IT in place, there will be parts eligible to external (public) cloud, and parts that would be required to stay inside the firewalls, so ability to integrate both side is key.  None the less, one of the major impact of Cloud Computing trend on IT, reported by Forrester, is the pressure it makes on CIO to evolve towards the same model that end-users are now used to in their day to day life, where self-service and flexibility are paramount. This is what is driving IT to transform itself toward "a Global Service Provider", or for some as "IT "is" the Business" (see : Gartner Identifies Four Futures for IT and CIO), and for both models toward a Private Cloud Service Provider. In this journey, there is still a big difference between most of existing external Cloud and a firm IT : the number of applications that a CIO has to manage. Most cloud providers today are overly specialized, but at the end of the day, there are really few business processes that rely on only one application. So CIOs has to combine everything together external and internal. And for the internal parts that they will have to make them evolve to a Private Cloud, the scope can be very large. This will often require CIOs to evolve from their traditional approach to more disruptive ones, the time has come to introduce new standards and processes, if they want to succeed. So let's have a look at the different Cloud models, what type of users they are addressing, what value they bring and most importantly what needs to be done by the  Cloud Provider, and what is left over to the user. IaaS, PaaS, SaaS : what's provided and what needs to be done First of all the Cloud Provider will have to provide all the infrastructure needed to deliver the service. And the more value IT will want to provide, the more IT will have to deliver and integrate : from disks to applications. As we can see in the above picture, providing pure IaaS, left a lot to cover for the end-user, that’s why the end-user targeted by this Cloud Service is IT people. If you want to bring more value to developers, you need to provide to them a development platform ready to use, which is what PaaS is standing for, by providing not only the processors power, storage and OS, but also the Database and Middleware platform. SaaS being the last mile of the Cloud, providing an application ready to use by business users, the remaining part for the end-users being configuring and specifying the application for their specific usage. In addition to that, there are common challenges encompassing all type of Cloud Services : Security : covering all aspect, not only of users management but also data flows and data privacy Charge back : measuring what is used and by whom Application management : providing capabilities not only to deploy, but also to upgrade, from OS for IaaS, Database, and Middleware for PaaS, to a full Business Application for SaaS. Scalability : ability to evolve ALL the components of the Cloud Provider stack as needed Availability : ability to cover “always on” requirements Efficiency : providing a infrastructure that leverage shared resources in an efficient way and still comply to SLA (performances, availability, scalability, and ability to evolve) Automation : providing the orchestration of ALL the components in all service life-cycle (deployment, growth & shrink (elasticity), upgrades,...) Management : providing monitoring, configuring and self-service up to the end-users Oracle Strategy and Clouds For CIOs to succeed in their Private Cloud implementation, means that they encompass all those aspects for each component life-cycle that they selected to build their Cloud. That’s where a multi-vendors layered approach comes short in terms of efficiency. That’s the reason why Oracle focus on taking care of all those aspects directly at Engineering level, to truly provide efficient Cloud Services solutions for IaaS, PaaS and SaaS. We are going as far as embedding software functions in hardware (storage, processor level,...) to ensure the best SLA with the highest efficiency. The beauty of it, as we rely on standards, is that the Oracle components that you are running today in-house, are exactly the same that we are using to build Clouds, bringing you flexibility, reversibility and fast path to adoption. With Oracle Engineered Systems (Exadata, Exalogic & SPARC SuperCluster, more specifically, when talking about Cloud), we are delivering all those components hardware and software already engineered together at Oracle factory, with a single pane of glace for the management of ALL the components through Oracle Enterprise Manager, and with high-availability, scalability and ability to evolve by design. To give you a feeling of what does that bring in terms just of implementation project timeline, for example with Oracle SPARC SuperCluster, we have a consistent track of record to have the system plug into existing Datacenter and ready in a week. This includes Oracle Database, OS, virtualization, Database Storage (Exadata Storage Cells in this case), Application Storage, and all network configuration. This strategy enable CIOs to very quickly build Cloud Services, taking out not only the complexity of integrating everything together but also taking out the automation and evolution complexity and cost. I invite you to discuss all those aspect in regards of your particular context face2face on November 28th.

  Read the article

• Visual Tree Enumeration

  - by codingbloke

  I feel compelled to post this blog because I find I’m repeatedly posting this same code in silverlight and windows-phone-7 answers in Stackoverflow. One common task that we feel we need to do is burrow into the visual tree in a Silverlight or Windows Phone 7 application (actually more recently I found myself doing this in WPF as well).  This allows access to details that aren’t exposed directly by some controls.  A good example of this sort of requirement is found in the “Restoring exact scroll position of a listbox in Windows Phone 7”  question on stackoverflow.  This required that the scroll position of the scroll viewer internal to a listbox be accessed. A caveat One caveat here is that we should seriously challenge the need for this burrowing since it may indicate that there is a design problem.  Burrowing into the visual tree or indeed burrowing out to containing ancestors could represent significant coupling between module boundaries and that generally isn’t a good idea. Why isn’t this idea just not cast aside as a no-no?  Well the whole concept of a “Templated Control”, which are in extensive use in these applications, opens the coupling between the content of the visual tree and the internal code of a control.   For example, I can completely change the appearance and positioning of elements that make up a ComboBox.  The ComboBox control relies on specific template parts having set names of a specified type being present in my template.  Rightly or wrongly this does kind of give license to writing code that has similar coupling. Hasn’t this been done already? Yes it has.  There are number of blogs already out there with similar solutions.  In fact if you are using Silverlight toolkit the VisualTreeExtensions class already provides this feature.  However I prefer my specific code because of the simplicity principle I hold to.  Only write the minimum code necessary to give all the features needed.  In this case I add just two extension methods Ancestors and Descendents, note I don’t bother with “Get” or “Visual” prefixes.  Also I haven’t added Parent or Children methods nor additional “AndSelf” methods because all but Children is achievable with the addition of some other Linq methods.  I decided to give Descendents an additional overload for depth hence a depth of 1 is equivalent to Children but this overload is a little more flexible than simply Children. So here is the code:- VisualTreeEnumeration public static class VisualTreeEnumeration {     public static IEnumerable<DependencyObject> Descendents(this DependencyObject root, int depth)     {         int count = VisualTreeHelper.GetChildrenCount(root);         for (int i = 0; i < count; i++)         {             var child = VisualTreeHelper.GetChild(root, i);             yield return child;             if (depth > 0)             {                 foreach (var descendent in Descendents(child, --depth))                     yield return descendent;             }         }     }     public static IEnumerable<DependencyObject> Descendents(this DependencyObject root)     {         return Descendents(root, Int32.MaxValue);     }     public static IEnumerable<DependencyObject> Ancestors(this DependencyObject root)     {         DependencyObject current = VisualTreeHelper.GetParent(root);         while (current != null)         {             yield return current;             current = VisualTreeHelper.GetParent(current);         }     } }   Usage examples The following are some examples of how to combine the above extension methods with Linq to generate the other axis scenarios that tree traversal code might require. Missing Axis Scenarios var parent = control.Ancestors().Take(1).FirstOrDefault(); var children = control.Descendents(1); var previousSiblings = control.Ancestors().Take(1)     .SelectMany(p => p.Descendents(1).TakeWhile(c => c != control)); var followingSiblings = control.Ancestors().Take(1)     .SelectMany(p => p.Descendents(1).SkipWhile(c => c != control).Skip(1)); var ancestorsAndSelf = Enumerable.Repeat((DependencyObject)control, 1)     .Concat(control.Ancestors()); var descendentsAndSelf = Enumerable.Repeat((DependencyObject)control, 1)     .Concat(control.Descendents()); You might ask why I don’t just include these in the VisualTreeEnumerator.  I don’t on the principle of only including code that is actually needed.  If you find that one or more of the above  is needed in your code then go ahead and create additional methods.  One of the downsides to Extension methods is that they can make finding the method you actually want in intellisense harder. Here are some real world usage scenarios for these methods:- Real World Scenarios //Gets the internal scrollviewer of a ListBox ScrollViewer sv = someListBox.Descendents().OfType<ScrollViewer>().FirstOrDefault(); // Get all text boxes in current UserControl:- var textBoxes = this.Descendents().OfType<TextBox>(); // All UIElement direct children of the layout root grid:- var topLevelElements = LayoutRoot.Descendents(0).OfType<UIElement>(); // Find the containing `ListBoxItem` for a UIElement:- var container = elem.Ancestors().OfType<ListBoxItem>().FirstOrDefault(); // Seek a button with the name "PinkElephants" even if outside of the current Namescope:- var pinkElephantsButton = this.Descendents()     .OfType<Button>()     .FirstOrDefault(b => b.Name == "PinkElephants"); //Clear all checkboxes with the name "Selector" in a Treeview foreach (CheckBox checkBox in elem.Descendents()     .OfType<CheckBox>().Where(c => c.Name == "Selector")) {     checkBox.IsChecked = false; }   The last couple of examples above demonstrate a common requirement of finding controls that have a specific name.  FindName will often not find these controls because they exist in a different namescope. Hope you find this useful, if not I’m just glad to be able to link to this blog in future stackoverflow answers.

  Read the article

• The Enterprise is a Curmudgeon

  - by John K. Hines

  Working in an enterprise environment is a unique challenge.  There's a lot more to software development than developing software.  A project lead or Scrum Master has to manage personalities and intra-team politics, has to manage accomplishing the task at hand while creating the opportunities and a reputation for handling desirable future work, has to create a competent, happy team that actually delivers while being careful not to burn bridges or hurt feelings outside the team.  Which makes me feel surprised to read advice like: " The enterprise should figure out what is likely to work best for itself and try to use it." - Ken Schwaber, The Enterprise and Scrum. The enterprises I have experience with are fundamentally unable to be self-reflective.  It's like asking a Roman gladiator if he'd like to carve out a little space in the arena for some silent meditation.  I'm currently wondering how compatible Scrum is with the top-down hierarchy of life in a large organization.  Specifically, manufacturing-mindset, fixed-release, harmony-valuing large organizations.  Now I understand why Agile can be a better fit for companies without much organizational inertia. Recently I've talked with nearly two dozen software professionals and their managers about Scrum and Agile.  I've become convinced that a developer, team, organization, or enterprise can be Agile without using Scrum.  But I'm not sure about what process would be the best fit, in general, for an enterprise that wants to become Agile.  It's possible I should read more than just the introduction to Ken's book. I do feel prepared to answer some of the questions I had asked in a previous post: How can Agile practices (including but not limited to Scrum) be adopted in situations where the highest-placed managers in a company demand software within extremely aggressive deadlines? Answer: In a very limited capacity at the individual level.  The situation here is that the senior management of this company values any software release more than it values developer well-being, end-user experience, or software quality.  Only if the developing organization is given an immediate refactoring opportunity does this sort of development make sense to a person who values sustainable software.   How can Agile practices be adopted by teams that do not perform a continuous cycle of new development, such as those whose sole purpose is to reproduce and debug customer issues? Answer: It depends.  For Scrum in particular, I don't believe Scrum is meant to manage unpredictable work.  While you can easily adopt XP practices for bug fixing, the project-management aspects of Scrum require some predictability.  My question here was meant toward those who want to apply Scrum to non-development teams.  In some cases it works, in others it does not. How can a team measure if its development efforts are both Agile and employ sound engineering practices? Answer: I'm currently leaning toward measuring these independently.  The Agile Principles are a terrific way to measure if a software team is agile.  Sound engineering practices are those practices which help developers meet the principles.  I think Scrum is being mistakenly applied as an engineering practice when it is essentially a project management practice.  In my opinion, XP and Lean are examples of good engineering practices. How can Agile be explained in an accurate way that describes its benefits to sceptical developers and/or revenue-focused non-developers? Answer: Agile techniques will result in higher-quality, lower-cost software development.  This comes primarily from finding defects earlier in the development cycle.  If there are individual developers who do not want to collaborate, write unit tests, or refactor, then these are simply developers who are either working in an area where adding these techniques will not add value (i.e. they are an expert) or they are a developer who is satisfied with the status quo.  In the first case they should be left alone.  In the second case, the results of Agile should be demonstrated by other developers who are willing to receive recognition for their efforts.  It all comes down to individuals, doesn't it?  If you're working in an organization whose Agile adoption consists exclusively of Scrum, consider ways to form individual Agile teams to demonstrate its benefits.  These can even be virtual teams that span people across org-chart boundaries.  Once you can measure real value, whether it's Scrum, Lean, or something else, people will follow.  Even the curmudgeons.

  Read the article

• C#/.NET Little Wonders: Getting Caller Information

  - by James Michael Hare

  Originally posted on: http://geekswithblogs.net/BlackRabbitCoder/archive/2013/07/25/c.net-little-wonders-getting-caller-information.aspx Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. There are times when it is desirable to know who called the method or property you are currently executing.  Some applications of this could include logging libraries, or possibly even something more advanced that may server up different objects depending on who called the method. In the past, we mostly relied on the System.Diagnostics namespace and its classes such as StackTrace and StackFrame to see who our caller was, but now in C# 5, we can also get much of this data at compile-time. Determining the caller using the stack One of the ways of doing this is to examine the call stack.  The classes that allow you to examine the call stack have been around for a long time and can give you a very deep view of the calling chain all the way back to the beginning for the thread that has called you. You can get caller information by either instantiating the StackTrace class (which will give you the complete stack trace, much like you see when an exception is generated), or by using StackFrame which gets a single frame of the stack trace.  Both involve examining the call stack, which is a non-trivial task, so care should be done not to do this in a performance-intensive situation. For our simple example let's say we are going to recreate the wheel and construct our own logging framework.  Perhaps we wish to create a simple method Log which will log the string-ified form of an object and some information about the caller.  We could easily do this as follows: 1: static void Log(object message) 2: { 3: // frame 1, true for source info 4: StackFrame frame = new StackFrame(1, true); 5: var method = frame.GetMethod(); 6: var fileName = frame.GetFileName(); 7: var lineNumber = frame.GetFileLineNumber(); 8: 9: // we'll just use a simple Console write for now 10: Console.WriteLine("{0}({1}):{2} - {3}", 11: fileName, lineNumber, method.Name, message); 12: } So, what we are doing here is grabbing the 2nd stack frame (the 1st is our current method) using a 2nd argument of true to specify we want source information (if available) and then taking the information from the frame.  This works fine, and if we tested it out by calling from a file such as this: 1: // File c:\projects\test\CallerInfo\CallerInfo.cs 2:  3: public class CallerInfo 4: { 5: Log("Hello Logger!"); 6: } We'd see this: 1: c:\projects\test\CallerInfo\CallerInfo.cs(5):Main - Hello Logger! This works well, and in fact CallStack and StackFrame are still the best ways to examine deeper into the call stack.  But if you only want to get information on the caller of your method, there is another option… Determining the caller at compile-time In C# 5 (.NET 4.5) they added some attributes that can be supplied to optional parameters on a method to receive caller information.  These attributes can only be applied to methods with optional parameters with explicit defaults.  Then, as the compiler determines who is calling your method with these attributes, it will fill in the values at compile-time. These are the currently supported attributes available in the  System.Runtime.CompilerServices namespace": CallerFilePathAttribute – The path and name of the file that is calling your method. CallerLineNumberAttribute – The line number in the file where your method is being called. CallerMemberName – The member that is calling your method. So let’s take a look at how our Log method would look using these attributes instead: 1: static int Log(object message, 2: [CallerMemberName] string memberName = "", 3: [CallerFilePath] string fileName = "", 4: [CallerLineNumber] int lineNumber = 0) 5: { 6: // we'll just use a simple Console write for now 7: Console.WriteLine("{0}({1}):{2} - {3}", 8: fileName, lineNumber, memberName, message); 9: } Again, calling this from our sample Main would give us the same result: 1: c:\projects\test\CallerInfo\CallerInfo.cs(5):Main - Hello Logger! However, though this seems the same, there are a few key differences. First of all, there are only 3 supported attributes (at this time) that give you the file path, line number, and calling member.  Thus, it does not give you as rich of detail as a StackFrame (which can give you the calling type as well and deeper frames, for example).  Also, these are supported through optional parameters, which means we could call our new Log method like this: 1: // They're defaults, why not fill 'em in 2: Log("My message.", "Some member", "Some file", -13); In addition, since these attributes require optional parameters, they cannot be used in properties, only in methods. These caveats aside, they do let you get similar information inside of methods at a much greater speed!  How much greater?  Well lets crank through 1,000,000 iterations of each.  instead of logging to console, I’ll return the formatted string length of each.  Doing this, we get: 1: Time for 1,000,000 iterations with StackTrace: 5096 ms 2: Time for 1,000,000 iterations with Attributes: 196 ms So you see, using the attributes is much, much faster!  Nearly 25x faster in fact.  Summary There are a few ways to get caller information for a method.  The StackFrame allows you to get a comprehensive set of information spanning the whole call stack, but at a heavier cost.  On the other hand, the attributes allow you to quickly get at caller information baked in at compile-time, but to do so you need to create optional parameters in your methods to support it. Technorati Tags: Little Wonders,CSharp,C#,.NET,StackFrame,CallStack,CallerFilePathAttribute,CallerLineNumberAttribute,CallerMemberName

  Read the article

• SharePoint 2010 Diagnostic Studio Remote Diag

  - by juanlarios

  I have had some time this week to try out some tools that I have been meaning to try out. This week I am trying out the SP 2010 Diagnostic Studio. I installed it successfully and tried it on my development evironment. I was able to build a report and a snapshot of the environment. I decided to turn my attention to my Employer's intranet environment. This would allow me to analyze it and measure it against benchmarks. I didn't want to install the Diagnostic studio on the Production Envorinment, lucky for me, the Diagnostic studio can be run remotely, well...kind of. Issue My development environment is a stand alone, full installation of SharePoint 2010 Server. It has Office 2010, SQL 2008 Enterprise, a DC...well you get the point, it's jammed packed! But more importantly it's a stand alone, self contained VM environment. Well Microsoft has instructions as to how to connect remotely with Diagnostic Studio here. The deciving part of this is that the SP2010DS prompts you for credentails. So I thought I was getting the right account to run the reports. I tried all the Power Shell commands in the link above but I still ended up getting the following errors: 06/28/2011 12:50:18    Connecting to remote server failed with the following error message : The WinRM client cannot process the request...If the SPN exists, but CredSSP cannot use Kerberos to validate the identity of the target computer and you still want to allow the delegation of the user credentials to the target computer, use gpedit.msc and look at the following policy: Computer Configuration -> Administrative Templates -> System -> Credentials Delegation -> Allow Fresh Credentials with NTLM-only Server Authentication.  Verify that it is enabled and configured with an SPN appropriate for the target computer. For example, for a target computer name "myserver.domain.com", the SPN can be one of the following: WSMAN/myserver.domain.com or WSMAN/*.domain.com. Try the request again after these changes. For more information, see the about_Remote_Troubleshooting Help topic. 06/28/2011 12:54:47    Access to the path '\\<targetserver>\C$\Users\<account logging in>\AppData\Local\Temp' is denied. You might also get an error message like this: The WinRM client cannot process the request. A computer policy does not allow the delegation of the user credentials to the target computer. Explanation After looking at the event logs on the target environment, I noticed that there were a several Security Exceptions. After looking at the specifics around who was denied access, I was able to see the account that was being denied access, it was the client machine administrator account. Well of course that was never going to work!!! After some quick Googling, the last error message above will lead you to edit the Local Group Policy on the client server. And although there are instructions from microsoft around doing this, it really will not work in this scenario. Notice the Description and how it only applices to authentication mentioned? Resolution I can tell you what I did, but I wish there was a better way but I simply don't know if it's duable any other way. Because my development environment had it's own DC, I didn't really want to mess with Kerberos authentication. I would also not be smart to connect that server to the domain, considering it has it's own DC. I ended up installing SharePoint 2010 Diagnostic Studio on another Windows 7 Dev environment I have, and connected the machien to the domain. I ran all the necesary remote credentials commands mentioned here. Those commands add the group policy for you! Once I did this I was able to authenticate properly and I was able to get the reports. Conclusion   You can run SharePoint 2010 Diagnostic Studio Remotely but it will require some specific scenarions. A couple of things I should mention is that as far as I understand, SP2010 DS, will install agents on your target environment to run tests and retrieve the data. I was a Farm Administrator, and also a Server Admin on SharePoint Server. I am not 100% sure if you need all those permissions but I that's just what I have to my internal intranet.   I deally I would like to have a machine that I can have SharePoint 2010 DIagnostic Studio installed and I can run that against client environments. It appears that I will not be able to do that, unless I enable Kerberos on my Windows 7 Machine now. If you have it installed in the same way I would like to have it, please let me know, I'll keep trying to get what I'm after. Hope this helps someone out there doing the same.

  Read the article

• Webcor Builders Coordinates Construction Schedules and Mitigates Potential Delays More Efficiently with Integrated Project Management

  - by Sylvie MacKenzie, PMP

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} With more than 40 years of commercial construction experience, Webcor Builders is a leading builder of distinguished, high-profile projects, including high-rise condominiums and hotels, laboratories, healthcare centers, and public works projects. Webcor is also known for its award-winning concrete, interior construction, historic restoration, and seismic renovation work. The company has completed more than 50 million square feet of projects to date. Considering the variety and complexity of the construction projects Webcor undertakes, an integrated project management solution is critical to ensuring optimal efficiency and completing client projects on time and on budget. The company previously used a number of scheduling systems for its various building projects. These packages provided different levels of schedule detail and required schedulers, engineers, and other employees to learn multiple systems. From an IT cost and complexity perspective, the company had to manage multiple scheduling systems and pay for multiple sets of licenses. The company looked to standardize on an enterprise project management system, and selected Oracle’s Primavera P6 Enterprise Project Portfolio Management. Webcor uses the solution’s advanced capabilities to schedule complex projects, analyze delays, model and propose multiple scenarios to demonstrate and mitigate delays and cost overruns, and process that information efficiently to deliver the scheduling precision that public and private projects require. In fact, the solution was instrumental in helping the company’s expansion into public sector projects during the recent economic downturn, and with Primavera P6 in place, it can deliver the precise schedule reporting required for large public projects. With Primavera P6 in place, the company could deliver the precise scheduling and milestone reporting capabilities required for large public projects. The solution is in managing the high-profile University of California – Berkeley Memorial Stadium project. Webcor was hired as construction manager and general contractor for the stadium renovation project, which is a fast-paced project located near the seismically active Hayward Fault Zone. Due to the University of California’s football schedule, meeting the Universities deadline for the coming season placed Webcor in a situation where risk awareness and early warnings of issues would be paramount. Webcor and the extended project team needed a solution that could instantly analyze alternate scenarios to mitigate potential delays; Primavera would deliver those answers.The team would also need to enable multiple stakeholders to use an internet-based platform to access the schedule from various locations, and model complicated sequencing requirements where swift decisions would be made to keep the project on track. The schedule is an integral part of Webcor’s construction management process for the stadium project. Rather than providing the client with the industry-standard monthly update, Webcor updates the critical path method (CPM) schedule on a weekly basis. The project team also reviews the schedule and updates weekly to confirm that progress and forecasted performance are accurate. Hired by the University for their ability to deliver in high risk environments The Webcor team was hit recently with a design supplement that could have added up to 70 days to the project. Using Oracle Primavera P6 the team sprung into action analyzing multiple “what if” scenarios to review mitigation means and methods.  Determined to make sure the Bears could take the field in the coming season the project team nearly eliminated the impact with their creative analysis in working the schedule. The total time from the issuance of the final design supplement to an agreed mitigation response was less than one week; leveraging the Oracle Primavera solution Webcor was able to deliver superior customer value With the ability to efficiently manage projects and schedules, Webcor can ensure it completes its projects on time and on budget, as well as inform clients about what changes to plans will mean in terms of delays and additional costs. Read the complete customer case study at :  http://www.oracle.com/us/corporate/customers/customersearch/webcor-builders-1-primavera-ss-1639886.html

  Read the article

• Breaking 1NF to model subset constraints. Does this sound sane?

  - by Chris Travers

  My first question here. Appologize if it is in the wrong forum but this seems pretty conceptual. I am looking at doing something that goes against conventional wisdom and want to get some feedback as to whether this is totally insane or will result in problems, so critique away! I am on PostgreSQL 9.1 but may be moving to 9.2 for this part of this project. To re-iterate: Does it seem sane to break 1NF in this way? I am not looking for debugging code so much as where people see problems that this might lead. The Problem In double entry accounting, financial transactions are journal entries with an arbitrary number of lines. Each line has either a left value (debit) or a right value (credit) which can be modelled as a single value with negatives as debits and positives as credits or vice versa. The sum of all debits and credits must equal zero (so if we go with a single amount field, sum(amount) must equal zero for each financial journal entry). SQL-based databases, pretty much required for this sort of work, have no way to express this sort of constraint natively and so any approach to enforcing it in the database seems rather complex. The Write Model The journal entries are append only. There is a possibility we will add a delete model but it will be subject to a different set of restrictions and so is not applicable here. If and when we allow deletes, we will probably do them using a simple ON DELETE CASCADE designation on the foreign key, and require that deletes go through a dedicated stored procedure which can enforce the other constraints. So inserts and selects have to be accommodated but updates and deletes do not for this task. My Proposed Solution My proposed solution is to break first normal form and model constraints on arrays of tuples, with a trigger that breaks the rows out into another table. CREATE TABLE journal_line ( entry_id bigserial primary key, account_id int not null references account(id), journal_entry_id bigint not null, -- adding references later amount numeric not null ); I would then add "table methods" to extract debits and credits for reporting purposes: CREATE OR REPLACE FUNCTION debits(journal_line) RETURNS numeric LANGUAGE sql IMMUTABLE AS $$ SELECT CASE WHEN $1.amount < 0 THEN $1.amount * -1 ELSE NULL END; $$; CREATE OR REPLACE FUNCTION credits(journal_line) RETURNS numeric LANGUAGE sql IMMUTABLE AS $$ SELECT CASE WHEN $1.amount > 0 THEN $1.amount ELSE NULL END; $$; Then the journal entry table (simplified for this example): CREATE TABLE journal_entry ( entry_id bigserial primary key, -- no natural keys :-( journal_id int not null references journal(id), date_posted date not null, reference text not null, description text not null, journal_lines journal_line[] not null ); Then a table method and and check constraints: CREATE OR REPLACE FUNCTION running_total(journal_entry) returns numeric language sql immutable as $$ SELECT sum(amount) FROM unnest($1.journal_lines); $$; ALTER TABLE journal_entry ADD CONSTRAINT CHECK (((journal_entry.running_total) = 0)); ALTER TABLE journal_line ADD FOREIGN KEY journal_entry_id REFERENCES journal_entry(entry_id); And finally we'd have a breakout trigger: CREATE OR REPLACE FUNCTION je_breakout() RETURNS TRIGGER LANGUAGE PLPGSQL AS $$ BEGIN IF TG_OP = 'INSERT' THEN INSERT INTO journal_line (journal_entry_id, account_id, amount) SELECT NEW.id, account_id, amount FROM unnest(NEW.journal_lines); RETURN NEW; ELSE RAISE EXCEPTION 'Operation Not Allowed'; END IF; END; $$; And finally CREATE TRIGGER AFTER INSERT OR UPDATE OR DELETE ON journal_entry FOR EACH ROW EXECUTE_PROCEDURE je_breaout(); Of course the example above is simplified. There will be a status table that will track approval status allowing for separation of duties, etc. However the goal here is to prevent unbalanced transactions. Any feedback? Does this sound entirely insane? Standard Solutions? In getting to this point I have to say I have looked at four different current ERP solutions to this problems: Represent every line item as a debit and a credit against different accounts. Use of foreign keys against the line item table to enforce an eventual running total of 0 Use of constraint triggers in PostgreSQL Forcing all validation here solely through the app logic. My concerns are that #1 is pretty limiting and very hard to audit internally. It's not programmer transparent and so it strikes me as being difficult to work with in the future. The second strikes me as being very complex and required a series of contraints and foreign keys against self to make work, and therefore it strikes me as complex, hard to sort out at least in my mind, and thus hard to work with. The fourth could be done as we force all access through stored procedures anyway and this is the most common solution (have the app total things up and throw an error otherwise). However, I think proof that a constraint is followed is superior to test cases, and so the question becomes whether this in fact generates insert anomilies rather than solving them. If this is a solved problem it isn't the case that everyone agrees on the solution....

  Read the article

• Applications: The Mathematics of Movement, Part 3

  - by TechTwaddle

  Previously: Part 1, Part 2 As promised in the previous post, this post will cover two variations of the marble move program. The first one, Infinite Move, keeps the marble moving towards the click point, rebounding it off the screen edges and changing its direction when the user clicks again. The second version, Finite Move, is the same as first except that the marble does not move forever. It moves towards the click point, rebounds off the screen edges and slowly comes to rest. The amount of time that it moves depends on the distance between the click point and marble. Infinite Move This case is simple (actually both cases are simple). In this case all we need is the direction information which is exactly what the unit vector stores. So when the user clicks, you calculate the unit vector towards the click point and then keep updating the marbles position like crazy. And, of course, there is no stop condition. There’s a little more additional code in the bounds checking conditions. Whenever the marble goes off the screen boundaries, we need to reverse its direction.  Here is the code for mouse up event and UpdatePosition() method, //stores the unit vector double unitX = 0, unitY = 0; double speed = 6; //speed times the unit vector double incrX = 0, incrY = 0; private void Form1_MouseUp(object sender, MouseEventArgs e) {     double x = e.X - marble1.x;     double y = e.Y - marble1.y;     //calculate distance between click point and current marble position     double lenSqrd = x * x + y * y;     double len = Math.Sqrt(lenSqrd);     //unit vector along the same direction (from marble towards click point)     unitX = x / len;     unitY = y / len;     timer1.Enabled = true; } private void UpdatePosition() {     //amount by which to increment marble position     incrX = speed * unitX;     incrY = speed * unitY;     marble1.x += incrX;     marble1.y += incrY;     //check for bounds     if ((int)marble1.x < MinX + marbleWidth / 2)     {         marble1.x = MinX + marbleWidth / 2;         unitX *= -1;     }     else if ((int)marble1.x > (MaxX - marbleWidth / 2))     {         marble1.x = MaxX - marbleWidth / 2;         unitX *= -1;     }     if ((int)marble1.y < MinY + marbleHeight / 2)     {         marble1.y = MinY + marbleHeight / 2;         unitY *= -1;     }     else if ((int)marble1.y > (MaxY - marbleHeight / 2))     {         marble1.y = MaxY - marbleHeight / 2;         unitY *= -1;     } } So whenever the user clicks we calculate the unit vector along that direction and also the amount by which the marble position needs to be incremented. The speed in this case is fixed at 6. You can experiment with different values. And under bounds checking, whenever the marble position goes out of bounds along the x or y direction we reverse the direction of the unit vector along that direction. Here’s a video of it running;   Finite Move The code for finite move is almost exactly same as that of Infinite Move, except for the difference that the speed is not fixed and there is an end condition, so the marble comes to rest after a while. Code follows, //unit vector along the direction of click point double unitX = 0, unitY = 0; //speed of the marble double speed = 0; private void Form1_MouseUp(object sender, MouseEventArgs e) {     double x = 0, y = 0;     double lengthSqrd = 0, length = 0;     x = e.X - marble1.x;     y = e.Y - marble1.y;     lengthSqrd = x * x + y * y;     //length in pixels (between click point and current marble pos)     length = Math.Sqrt(lengthSqrd);     //unit vector along the same direction as vector(x, y)     unitX = x / length;     unitY = y / length;     speed = length / 12;     timer1.Enabled = true; } private void UpdatePosition() {     marble1.x += speed * unitX;     marble1.y += speed * unitY;     //check for bounds     if ((int)marble1.x < MinX + marbleWidth / 2)     {         marble1.x = MinX + marbleWidth / 2;         unitX *= -1;     }     else if ((int)marble1.x > (MaxX - marbleWidth / 2))     {         marble1.x = MaxX - marbleWidth / 2;         unitX *= -1;     }     if ((int)marble1.y < MinY + marbleHeight / 2)     {         marble1.y = MinY + marbleHeight / 2;         unitY *= -1;     }     else if ((int)marble1.y > (MaxY - marbleHeight / 2))     {         marble1.y = MaxY - marbleHeight / 2;         unitY *= -1;     }     //reduce speed by 3% in every loop     speed = speed * 0.97f;     if ((int)speed <= 0)     {         timer1.Enabled = false;     } } So the only difference is that the speed is calculated as a function of length when the mouse up event occurs. Again, this can be experimented with. Bounds checking is same as before. In the update and draw cycle, we reduce the speed by 3% in every cycle. Since speed is calculated as a function of length, speed = length/12, the amount of time it takes speed to reach zero is directly proportional to length. Note that the speed is in ‘pixels per 40ms’ because the timeout value of the timer is 40ms.  The readability can be improved by representing speed in ‘pixels per second’. This would require you to add some more calculations to the code, which I leave out as an exercise. Here’s a video of this second version,

  Read the article

• Oracle NoSQL Database Exceeds 1 Million Mixed YCSB Ops/Sec

  - by Charles Lamb

  We ran a set of YCSB performance tests on Oracle NoSQL Database using SSD cards and Intel Xeon E5-2690 CPUs with the goal of achieving 1M mixed ops/sec on a 95% read / 5% update workload. We used the standard YCSB parameters: 13 byte keys and 1KB data size (1,102 bytes after serialization). The maximum database size was 2 billion records, or approximately 2 TB of data. We sized the shards to ensure that this was not an "in-memory" test (i.e. the data portion of the B-Trees did not fit into memory). All updates were durable and used the "simple majority" replica ack policy, effectively 'committing to the network'. All read operations used the Consistency.NONE_REQUIRED parameter allowing reads to be performed on any replica. In the past we have achieved 100K ops/sec using SSD cards on a single shard cluster (replication factor 3) so for this test we used 10 shards on 15 Storage Nodes with each SN carrying 2 Rep Nodes and each RN assigned to its own SSD card. After correcting a scaling problem in YCSB, we blew past the 1M ops/sec mark with 8 shards and proceeded to hit 1.2M ops/sec with 10 shards.  Hardware Configuration We used 15 servers, each configured with two 335 GB SSD cards. We did not have homogeneous CPUs across all 15 servers available to us so 12 of the 15 were Xeon E5-2690, 2.9 GHz, 2 sockets, 32 threads, 193 GB RAM, and the other 3 were Xeon E5-2680, 2.7 GHz, 2 sockets, 32 threads, 193 GB RAM.  There might have been some upside in having all 15 machines configured with the faster CPU, but since CPU was not the limiting factor we don't believe the improvement would be significant. The client machines were Xeon X5670, 2.93 GHz, 2 sockets, 24 threads, 96 GB RAM. Although the clients had 96 GB of RAM, neither the NoSQL Database or YCSB clients require anywhere near that amount of memory and the test could have just easily been run with much less. Networking was all 10GigE. YCSB Scaling Problem We made three modifications to the YCSB benchmark. The first was to allow the test to accommodate more than 2 billion records (effectively int's vs long's). To keep the key size constant, we changed the code to use base 32 for the user ids. The second change involved to the way we run the YCSB client in order to make the test itself horizontally scalable.The basic problem has to do with the way the YCSB test creates its Zipfian distribution of keys which is intended to model "real" loads by generating clusters of key collisions. Unfortunately, the percentage of collisions on the most contentious keys remains the same even as the number of keys in the database increases. As we scale up the load, the number of collisions on those keys increases as well, eventually exceeding the capacity of the single server used for a given key.This is not a workload that is realistic or amenable to horizontal scaling. YCSB does provide alternate key distribution algorithms so this is not a shortcoming of YCSB in general. We decided that a better model would be for the key collisions to be limited to a given YCSB client process. That way, as additional YCSB client processes (i.e. additional load) are added, they each maintain the same number of collisions they encounter themselves, but do not increase the number of collisions on a single key in the entire store. We added client processes proportionally to the number of records in the database (and therefore the number of shards). This change to the use of YCSB better models a use case where new groups of users are likely to access either just their own entries, or entries within their own subgroups, rather than all users showing the same interest in a single global collection of keys. If an application finds every user having the same likelihood of wanting to modify a single global key, that application has no real hope of getting horizontal scaling. Finally, we used read/modify/write (also known as "Compare And Set") style updates during the mixed phase. This uses versioned operations to make sure that no updates are lost. This mode of operation provides better application behavior than the way we have typically run YCSB in the past, and is only practical at scale because we eliminated the shared key collision hotspots.It is also a more realistic testing scenario. To reiterate, all updates used a simple majority replica ack policy making them durable. Scalability Results In the table below, the "KVS Size" column is the number of records with the number of shards and the replication factor. Hence, the first row indicates 400m total records in the NoSQL Database (KV Store), 2 shards, and a replication factor of 3. The "Clients" column indicates the number of YCSB client processes. "Threads" is the number of threads per process with the total number of threads. Hence, 90 threads per YCSB process for a total of 360 threads. The client processes were distributed across 10 client machines. Shards KVS Size Clients Mixed (records) Threads OverallThroughput(ops/sec) Read Latencyav/95%/99%(ms) Write Latencyav/95%/99%(ms) 2 400m(2x3) 4 90(360) 302,152 0.76/1/3 3.08/8/35 4 800m(4x3) 8 90(720) 558,569 0.79/1/4 3.82/16/45 8 1600m(8x3) 16 90(1440) 1,028,868 0.85/2/5 4.29/21/51 10 2000m(10x3) 20 90(1800) 1,244,550 0.88/2/6 4.47/23/53

  Read the article

• CPU Usage in Very Large Coherence Clusters

  - by jpurdy

  When sizing Coherence installations, one of the complicating factors is that these installations (by their very nature) tend to be application-specific, with some being large, memory-intensive caches, with others acting as I/O-intensive transaction-processing platforms, and still others performing CPU-intensive calculations across the data grid. Regardless of the primary resource requirements, Coherence sizing calculations are inherently empirical, in that there are so many permutations that a simple spreadsheet approach to sizing is rarely optimal (though it can provide a good starting estimate). So we typically recommend measuring actual resource usage (primarily CPU cycles, network bandwidth and memory) at a given load, and then extrapolating from those measurements. Of course there may be multiple types of load, and these may have varying degrees of correlation -- for example, an increased request rate may drive up the number of objects "pinned" in memory at any point, but the increase may be less than linear if those objects are naturally shared by concurrent requests. But for most reasonably-designed applications, a linear resource model will be reasonably accurate for most levels of scale. However, at extreme scale, sizing becomes a bit more complicated as certain cluster management operations -- while very infrequent -- become increasingly critical. This is because certain operations do not naturally tend to scale out. In a small cluster, sizing is primarily driven by the request rate, required cache size, or other application-driven metrics. In larger clusters (e.g. those with hundreds of cluster members), certain infrastructure tasks become intensive, in particular those related to members joining and leaving the cluster, such as introducing new cluster members to the rest of the cluster, or publishing the location of partitions during rebalancing. These tasks have a strong tendency to require all updates to be routed via a single member for the sake of cluster stability and data integrity. Fortunately that member is dynamically assigned in Coherence, so it is not a single point of failure, but it may still become a single point of bottleneck (until the cluster finishes its reconfiguration, at which point this member will have a similar load to the rest of the members). The most common cause of scaling issues in large clusters is disabling multicast (by configuring well-known addresses, aka WKA). This obviously impacts network usage, but it also has a large impact on CPU usage, primarily since the senior member must directly communicate certain messages with every other cluster member, and this communication requires significant CPU time. In particular, the need to notify the rest of the cluster about membership changes and corresponding partition reassignments adds stress to the senior member. Given that portions of the network stack may tend to be single-threaded (both in Coherence and the underlying OS), this may be even more problematic on servers with poor single-threaded performance. As a result of this, some extremely large clusters may be configured with a smaller number of partitions than ideal. This results in the size of each partition being increased. When a cache server fails, the other servers will use their fractional backups to recover the state of that server (and take over responsibility for their backed-up portion of that state). The finest granularity of this recovery is a single partition, and the single service thread can not accept new requests during this recovery. Ordinarily, recovery is practically instantaneous (it is roughly equivalent to the time required to iterate over a set of backup backing map entries and move them to the primary backing map in the same JVM). But certain factors can increase this duration drastically (to several seconds): large partitions, sufficiently slow single-threaded CPU performance, many or expensive indexes to rebuild, etc. The solution of course is to mitigate each of those factors but in many cases this may be challenging. Larger clusters also lead to the temptation to place more load on the available hardware resources, spreading CPU resources thin. As an example, while we've long been aware of how garbage collection can cause significant pauses, it usually isn't viewed as a major consumer of CPU (in terms of overall system throughput). Typically, the use of a concurrent collector allows greater responsiveness by minimizing pause times, at the cost of reducing system throughput. However, at a recent engagement, we were forced to turn off the concurrent collector and use a traditional parallel "stop the world" collector to reduce CPU usage to an acceptable level. In summary, there are some less obvious factors that may result in excessive CPU consumption in a larger cluster, so it is even more critical to test at full scale, even though allocating sufficient hardware may often be much more difficult for these large clusters.

  Read the article

• Alternative way of developing for ASP.NET to WebForms - Any problems with this?

  - by John

  So I have been developing in ASP.NET WebForms for some time now but often get annoyed with all the overhead (like ViewState and all the JavaScript it generates), and the way WebForms takes over a lot of the HTML generation. Sometimes I just want full control over the markup and produce efficient HTML of my own so I have been experimenting with what I like to call HtmlForms. Essentially this is using ASP.NET WebForms but without the form runat="server" tag. Without this tag, ASP.NET does not seem to add anything to the page at all. From some basic tests it seems that it runs well and you still have the ability to use code-behind pages, and many ASP.NET controls such as repeaters. Of course without the form runat="server" many controls won't work. A post at Enterprise Software Development lists the controls that do require the tag. From that list you will see that all of the form elements like TextBoxes, DropDownLists, RadioButtons, etc cannot be used. Instead you use normal HTML form controls. But how do you access these HTML controls from the code behind? Retrieving values on post back is easy, you just use Request.QueryString or Request.Form. But passing data to the control could be a little messy. Do you use a ASP.NET Literal control in the value field or do you use <%= value % in the markup page? I found it best to add runat="server" to my HTML controls and then you can access the control in your code-behind like this: ((HtmlInputText)txtName).Value = "blah"; Here's a example that shows what you can do with a textbox and drop down list: Default.aspx <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="NoForm.Default" %> <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="NoForm.Default" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN""http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title></title> </head> <body> <form action="" method="post"> <label for="txtName">Name:</label> <input id="txtName" name="txtName" runat="server" /><br /> <label for="ddlState">State:</label> <select id="ddlState" name="ddlState" runat="server"> <option value=""></option> </select><br /> <input type="submit" value="Submit" /> </form> </body> </html> Default.aspx.cs using System; using System.Web.UI.HtmlControls; using System.Web.UI.WebControls; namespace NoForm { public partial class Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { //Default values string name = string.Empty; string state = string.Empty; if (Request.RequestType == "POST") { //If form submitted (post back) name = Request.Form["txtName"]; state = Request.Form["ddlState"]; //Server side form validation would go here //and actions to process form and redirect } ((HtmlInputText)txtName).Value = name; ((HtmlSelect)ddlState).Items.Add(new ListItem("ACT")); ((HtmlSelect)ddlState).Items.Add(new ListItem("NSW")); ((HtmlSelect)ddlState).Items.Add(new ListItem("NT")); ((HtmlSelect)ddlState).Items.Add(new ListItem("QLD")); ((HtmlSelect)ddlState).Items.Add(new ListItem("SA")); ((HtmlSelect)ddlState).Items.Add(new ListItem("TAS")); ((HtmlSelect)ddlState).Items.Add(new ListItem("VIC")); ((HtmlSelect)ddlState).Items.Add(new ListItem("WA")); if (((HtmlSelect)ddlState).Items.FindByValue(state) != null) ((HtmlSelect)ddlState).Value = state; } } } As you can see, you have similar functionality to ASP.NET server controls but more control over the final markup, and less overhead like ViewState and all the JavaScript ASP.NET adds. Interestingly you can also use HttpPostedFile to handle file uploads using your own input type="file" control (and necessary form enctype="multipart/form-data"). So my question is can you see any problems with this method, and any thoughts on it's usefulness? I have further details and tests on my blog.

  Read the article

• Understanding the 'High Performance' meaning in Extreme Transaction Processing

  - by kyap

  Despite my previous blogs entries on SOA/BPM and Identity Management, the domain where I'm the most passionated is definitely the Extreme Transaction Processing, commonly called XTP.I came across XTP back to 2007 while I was still FMW Product Manager in EMEA. At that time Oracle acquired a company called Tangosol, which owned an unique product called Coherence that we renamed to Oracle Coherence. Beside this innovative renaming of the product, to be honest, I didn't know much about it, except being a "distributed in-memory cache for Extreme Transaction Processing"... not very helpful still.In general when people doesn't fully understand a technology or a concept, they tend to find some shortcuts, either correct or not, to justify their lack-of understanding... and of course I was part of this category of individuals. And the shortcut was "Oracle Coherence Cache helps to improve Performance". Excellent marketing slogan... but not very meaningful still. By chance I was able to get away quickly from that group in July 2007* at Thames Valley Park (UK), after I attended one of the most interesting workshops, in my 10 years career in Oracle, delivered by Brian Oliver. The biggest mistake I made was to assume that performance improvement with Coherence was related to the response time. Which can be considered as legitimus at that time, because after-all caches help to reduce latency on cached data access, hence reduce the response-time. But like all caches, you need to define caching and expiration policies, thinking about the cache-missed strategy, and most of the time you have to re-write partially your application in order to work with the cache. At a result, the expected benefit vanishes... so, not very useful then?The key mistake I made was my perception or obsession on how performance improvement should be driven, but I strongly believe this is still a common problem to most of the developers. In fact we all know the that the performance of a system is generally presented by the Capacity (or Throughput), with the 2 important dimensions Speed (response-time) and Volume (load) :Capacity (TPS) = Volume (T) / Speed (S)To increase the Capacity, we can either reduce the Speed(in terms of response-time), or to increase the Volume. However we tend to only focus on reducing the Speed dimension, perhaps it is more concrete and tangible to measure, and nicer to present to our management because there's a direct impact onto the end-users experience. On the other hand, we assume the Volume can be addressed by the underlying hardware or software stack, so if we need more capacity (scale out), we just add more hardware or software. Unfortunately, the reality proves that IT is never as ideal as we assume...The challenge with Speed improvement approach is that it is generally difficult and costly to make things already fast... faster. And by adding Coherence will not necessarily help either. Even though we manage to do so, the Capacity can not increase forever because... the Speed can be influenced by the Volume. For all system, we always have a performance illustration as follow: In all traditional system, the increase of Volume (Transaction) will also increase the Speed (Response-Time) as some point. The reason is simple: most of the time the Application logics were not designed to scale. As an example, if you have a while-loop in your application, it is natural to conceive that parsing 200 entries will require double execution-time compared to 100 entries. If you need to "Speed-up" the execution, you can only upgrade your hardware (scale-up) with faster CPU and/or network to reduce network latency. It is technically limited and economically inefficient. And this is exactly where XTP and Coherence kick in. The primary objective of XTP is about designing applications which can scale-out for increasing the Volume, by applying coding techniques to keep the execution-time as constant as possible, independently of the number of runtime data being manipulated. It is actually not just about having an application running as fast as possible, but about having a much more predictable system, with constant response-time and linearly scale, so we can easily increase throughput by adding more hardwares in parallel. It is in general combined with the Low Latency Programming model, where we tried to optimize the network usage as much as possible, either from the programmatic angle (less network-hoops to complete a task), and/or from a hardware angle (faster network equipments). In this picture, Oracle Coherence can be considered as software-level XTP enabler, via the Distributed-Cache because it can guarantee: - Constant Data Objects access time, independently from the number of Objects and the Coherence Cluster size - Data Objects Distribution by Affinity for in-memory data grouping - In-place Data Processing for parallel executionTo summarize, Oracle Coherence is indeed useful to improve your application performance, just not in the way we commonly think. It's not about the Speed itself, but about the overall Capacity with Extreme Load while keeping consistant Speed. In the future I will keep adding new blog entries around this topic, with some sample codes experiences sharing that I capture in the last few years. In the meanwhile if you want to know more how Oracle Coherence, I strongly suggest you to start with checking how our worldwide customers are using Oracle Coherence first, then you can start playing with the product through our tutorial.Have Fun !

  Read the article

• Multiple enemy array in LibGDX

  - by johnny-b

  I am trying to make a multiple enemy array, where every 30 secods a new bullet comes from a random point. And if the bullet is clicked it should disapear and a pop like an explosion should appear. And if the bullet hits the ball then the ball pops. so the bullet should change to a different sprite or texture. same with the ball pop. But all that happens is the bullet if touched pops and nothing else happens. And if modified then the bullet keeps flashing as the update is way too much. I have added COMMENTS in the code to explain more on the issues. below is the code. if more code is needed i will provide. Thank you public class GameRenderer { private GameWorld myWorld; private OrthographicCamera cam; private ShapeRenderer shapeRenderer; private SpriteBatch batcher; // Game Objects private Ball ball; private ScrollHandler scroller; private Background background; private Bullet bullet1; private BulletPop bPop; private Array<Bullet> bullets; // This is for the delay of the bullet coming one by one every 30 seconds. /** The time of the last shot fired, we set it to the current time in nano when the object is first created */ double lastShot = TimeUtils.nanoTime(); /** Convert 30 seconds into nano seconds, so 30,000 milli = 30 seconds */ double shotFreq = TimeUtils.millisToNanos(30000); // Game Assets private TextureRegion bg, bPop; private Animation bulletAnimation, ballAnimation; private Animation ballPopAnimation; public GameRenderer(GameWorld world) { myWorld = world; cam = new OrthographicCamera(); cam.setToOrtho(true, 480, 320); batcher = new SpriteBatch(); // Attach batcher to camera batcher.setProjectionMatrix(cam.combined); shapeRenderer = new ShapeRenderer(); shapeRenderer.setProjectionMatrix(cam.combined); // This is suppose to produce 10 bullets at random places on the background. bullets = new Array<Bullet>(); Bullet bullet = null; float bulletX = 00.0f; float bulletY = 00.0f; for (int i = 0; i < 10; i++) { bulletX = MathUtils.random(-10, 10); bulletY = MathUtils.random(-10, 10); bullet = new Bullet(bulletX, bulletY); AssetLoader.bullet1.flip(true, false); AssetLoader.bullet2.flip(true, false); bullets.add(bullet); } // Call helper methods to initialize instance variables initGameObjects(); initAssets(); } private void initGameObjects() { ball = GameWorld.getBall(); bullet1 = myWorld.getBullet1(); bPop = myWorld.getBulletPop(); scroller = myWorld.getScroller(); } private void initAssets() { bg = AssetLoader.bg; ballAnimation = AssetLoader.ballAnimation; bullet1Animation = AssetLoader.bullet1Animation; ballPopAnimation = AssetLoader.ballPopAnimation; } // This is to take the bullet away when clicked or touched. public void onClick() { for (int i = 0; i < bullets.size; i++) { if (bullets.get(i).getBounds().contains(0, 0)) bullets.removeIndex(i); } } private void drawBackground() { batcher.draw(bg1, background.getX(), background.getY(), background.getWidth(), backgroundMove.getHeight()); } public void render(float runTime) { Gdx.gl.glClearColor(0, 0, 0, 1); Gdx.gl.glClear(GL30.GL_COLOR_BUFFER_BIT); batcher.begin(); // Disable transparency // This is good for performance when drawing images that do not require // transparency. batcher.disableBlending(); drawBackground(); batcher.enableBlending(); // when the bullet hits the ball, it should be disposed or taken away and a ball pop sprite/texture should be put in its place if (bullet1.collides(ball)) { // draws the bPop texture but the bullet does not go just keeps going around, and the bPop texture goes. batcher.draw(AssetLoader.bPop, 195, 273); } batcher.draw(AssetLoader.ballAnimation.getKeyFrame(runTime), ball.getX(), ball.getY(), ball.getWidth(), ball.getHeight()); // this is where i am trying to make the bullets come one by one, and if removed via the onClick() then bPop animation // should play but does not??? if(TimeUtils.nanoTime() - lastShot > shotFreq){ // Create your stuff for (int i = 0; i < bullets.size; i++) { bullets.get(i); batcher.draw(AssetLoader.bullet1Animation.getKeyFrame(runTime), bullet1.getX(), bullet1.getY(), bullet1.getOriginX(), bullet1.getOriginY(), bullet1.getWidth(), bullet1.getHeight(), 1.0f, 1.0f, bullet1.getRotation()); if (bullets.removeValue(bullet1, false)) { batcher.draw(AssetLoader.ballPopAnimation.getKeyFrame(runTime), bPop1.getX(), bPop1.getY(), bPop1.getWidth(), bPop1.getHeight()); } } /* Very important to set the last shot to now, or it will mess up and go full auto */ lastShot = TimeUtils.nanoTime(); } // End SpriteBatch batcher.end(); } } Thank you

  Read the article

• Pirates, Treasure Chests and Architectural Mapping

  Pirate 1: Why do pirates create treasure maps? Pirate 2: I do not know.Pirate 1: So they can find their gold. Yes, that was a bad joke, but it does illustrate a point. Pirates are known for drawing treasure maps to their most prized possession. These documents detail the decisions pirates made in order to hide and find their chests of gold. The map allows them to trace the steps they took originally to hide their treasure so that they may return. As software engineers, programmers, and architects we need to treat software implementations much like our treasure chest. Why is software like a treasure chest? It cost money, time,  and resources to develop (Usually) It can make or save money, time, and resources (Hopefully) If we operate under the assumption that software is like a treasure chest then wouldn’t make sense to document the steps, rationale, concerns, and decisions about how it was designed? Pirates are notorious for documenting where they hide their treasure.  Shouldn’t we as creators of software do the same? By documenting our design decisions and rationale behind them will help others be able to understand and maintain implemented systems. This can only be done if the design decisions are correctly mapped to its corresponding implementation. This allows for architectural decisions to be traced from the conceptual model, architectural design and finally to the implementation. Mapping gives software professional a method to trace the reason why specific areas of code were developed verses other options. Just like the pirates we need to able to trace our steps from the start of a project to its implementation,  so that we will understand why specific choices were chosen. The traceability of a software implementation that actually maps back to its originating design decisions is invaluable for ensuring that architectural drifting and erosion does not take place. The drifting and erosion is prevented by allowing others to understand the rational of why an implementation was created in a specific manor or methodology The process of mapping distinct design concerns/decisions to the location of its implemented is called traceability. In this context traceability is defined as method for connecting distinctive software artifacts. This process allows architectural design models and decisions to be directly connected with its physical implementation. The process of mapping architectural design concerns to a software implementation can be very complex. However, most design decision can be placed in  a few generalized categories. Commonly Mapped Design Decisions Design Rationale Components and Connectors Interfaces Behaviors/Properties Design rational is one of the hardest categories to map directly to an implementation. Typically this rational is mapped or document in code via comments. These comments consist of general design decisions and reasoning because they do not directly refer to a specific part of an application. They typically focus more on the higher level concerns. Components and connectors can directly be mapped to architectural concerns. Typically concerns subdivide an application in to distinct functional areas. These functional areas then can map directly back to their originating concerns.Interfaces can be mapped back to design concerns in one of two ways. Interfaces that pertain to specific function definitions can be directly mapped back to its originating concern(s). However, more complicated interfaces require additional analysis to ensure that the proper mappings are created. Depending on the complexity some Behaviors\Properties can be translated directly into a generic implementation structure that is ready for business logic. In addition, some behaviors can be translated directly in to an actual implementation depending on the complexity and architectural tools used. Mapping design concerns to an implementation is a lot of work to maintain, but is doable. In order to ensure that concerns are mapped correctly and that an implementation correctly reflects its design concerns then one of two standard approaches are usually used. All Changes Come From ArchitectureBy forcing all application changes to come through the architectural model prior to implementation then the existing mappings will be used to locate where in the implementation changes need to occur. Allow Changes From Implementation Or Architecture By allowing changes to come from the implementation and/or the architecture then the other area must be kept in sync. This methodology is more complex compared to the previous approach.  One reason to justify the added complexity for an application is due to the fact that this approach tends to detect and prevent architectural drift and erosion. Additionally, this approach is usually maintained via software because of the complexity. Reference:Taylor, R. N., Medvidovic, N., & Dashofy, E. M. (2009). Software architecture: Foundations, theory, and practice Hoboken, NJ: John Wiley & Sons  

  Read the article

• Synergy - easy share of keyboard and mouse between multiple computers

  Did you ever have the urge to share one set of keyboard and mouse between multiple machines? If so, please read on... Using multiple machines Honestly, as a software craftsman it is my daily business to run multiple machines - either physical or virtual - to be able to solve my customers' requirements. Recent hardware equipment allows this very easily. For laptops it's a no-brainer to attach a second or even a third screen in order to extend your native display. This works quite handy and in my case I used to attached two additional screens - one via HD15 connector, the other via HDMI. But... as it's a laptop and therefore a mobile unit there are slight restrictions. Detaching and re-attaching all cables when changing locations is one of them but hardware limitations, too. After all, it's a laptop and not a workstation. I guess, that anyone working in IT (or ICT) has more than one machine at their workplace or their home office and at least I find it quite annoying to have multiple sets of keyboard and mouse conquering my remaining space on my desk. Despite the ugly looks of all those cables and whatsoever 'chaos of distraction' I prefer a more clean solution and working environment. This allows me to actually focus on my work and tasks to do rather than to worry about choosing the right combination of keyboard/mouse. My current workplace is a patch work of various pieces of hardware (approx. 2-3 years): DIY desktop on Ubuntu 12.04 64-bit, Core2 Duo (E7400, 2.8GHz), 4GB RAM, 2x 250GB HDD, nVidia GPU 512MB Dell Inspiron 1525 on Windows 8 64-bit, 4GB RAM, 200GB HDD HP Compaq 6720s on Windows Vista 32-bit, Core2 Duo (T5670, 1.8GHz), 2GB RAM, 160GB HDD Mac mini on Mac OS X 10.7, Core i5 (2.3 GHz), 2GB RAM, 500GB HDD I know... Not the latest and greatest but a decent combination to work with. New system(s) is/are already on the shopping list but I live in the 'wrong' country to buy computer hardware. So, the next trip abroad will provide me with some new stuff. Using multiple operating systems The list of hardware above already names different operating systems, and actually I have only one preference: Linux. But still my job as a software craftsman for Visual FoxPro and .NET development requires other OSes, too. Not a big deal, it's just like this. Additionally to those physical machines, there are a bunch of virtual machines around. Most of them running either Windows XP or Windows 7. Since years I have the practice that each development for one customer is isolated into its own virtual machine and environment. This keeps it clean and version-safe. But as you can easily imagine with that setup there are a couple of constraints referring to keyboard and mouse. Usually, those systems require their own pieces of hardware attached. As stated, I don't like clutter on my desk's surface, so a cross-platform solution has to come in here. In the past, I tried it with various applications, hardware or network protocols like X11, RDP, NX, TeamViewer, RAdmin, KVM switch, etc. but the problem in this case is that they either allow you to remotely connect to the other system or exclusively 'bind' your peripherals to the active system. Not optimal after all. Synergy to the rescue Quote from their website: "Synergy lets you easily share your mouse and keyboard between multiple computers on your desk, and it's Free and Open Source. Just move your mouse off the edge of one computer's screen on to another. You can even share all of your clipboards. All you need is a network connection. Synergy is cross-platform (works on Windows, Mac OS X and Linux)." Yep, that's it! All I need for my setup here... Actually, I couldn't believe it myself that I didn't stumble over synergy earlier but 'Get over it' and there we go. And despite the fact that it is Open Source, no, it's also for free. Donations for the developers are very welcome and recently they introduced Synergy Premium. A possibility to buy so-called premium votes that can be used to put more weight / importance on specific issues or bugs that you would like the developers to look into. Installation and configuration Simply download the installation packages for your systems of choice, run the installer and enter some minor information about your network setup. I chose my desktop machine for the role of the Synergy server and configured my screen setup as follows: The screen setup allows you currently to build or connect up to 15 machines. The number of screens can be higher as those machine might have multiple screens physically attached. Synergy takes this into the overall calculations and simply works as expected. I tried it for fun with a second monitor each connected to both laptops to have a total number of 6 active screens. No flaws after all - stunning! All the other machines are configured as clients like so: Side note: The screenshot was taken on Windows 8 and pasted via clipboard into Gimp running on Ubuntu. Resume Synergy is now definitely in my box of tools for my daily work, and amongst the first pieces of software I install after the operating system. It just simplifies my life and cleans my desk. Never again without Synergy!Now, only waiting for an Android version to integrate my Galaxy Tab 10.1, too. ;-) Please, check out that superb product and enjoy sharing one keyboard, one mouse and one clipboard between your various machines and operating systems.

  Read the article

• Cloud Deployment Models

  - by B R Clouse

  Normal 0 false false false EN-US X-NONE X-NONE As the cloud paradigm grows in depth and breadth, more readers are approaching the topic for the first time, or from a new perspective.  This blog is a basic review of  cloud deployment models, to help orient newcomers and neophytes. Most cloud deployments today are either private or public. It is also possible to connect a private cloud and a public cloud to form a hybrid cloud. A private cloud is for the exclusive use of an organization. Enterprises, universities and government agencies throughout the world are using private clouds. Some have designed, built and now manage their private clouds. Others use a private cloud that was built by and is now managed by a provider, hosted either onsite or at the provider’s datacenter. Because private clouds are for exclusive use, they are usually the option chosen by organizations with concerns about data security and guaranteed performance. Public clouds are open to anyone with an Internet connection. Because they require no capital investment from their users, they are particularly attractive to companies with limited resources in less regulated environments and for temporary workloads such as development and test environments. Public clouds offer a range of products, from end-user software packages to more basic services such as databases or operating environments. Public clouds may also offer cloud services such as a disaster recovery for a private cloud, or the ability to “cloudburst” a temporary workload spike from a private cloud to a public cloud. These are examples of a hybrid cloud. These are most feasible when the private and public clouds are built with similar technologies. Usually people think of a public cloud in terms of a user role, e.g., “Which public cloud should I consider using?” But someone needs to own and manage that public cloud. The company who owns and operates a public cloud is known as a public cloud provider. Oracle Database Cloud Service, Amazon RDS, database.com and Savvis Symphony Database are examples of public cloud database services. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} When evaluating deployment models, be aware that you can use any or all of the available options. Some workloads may be best-suited for a private cloud, some for a public or hybrid cloud. And you might deploy multiple private clouds in your organization. If you are going to combine multiple clouds, then you want to make sure that each cloud is based on a consistent technology portfolio and architecture. This simplifies management and gives you the greatest flexibility in moving resources and workloads among your different clouds. Oracle’s portfolio of cloud products and services enables both deployment models. Oracle can manage either model. Universities, government agencies and companies in all types of business everywhere in the world are using clouds built with the Oracle portfolio. By employing a consistent portfolio, these customers are able to run all of their workloads – from test and development to the most mission-critical -- in a consistent manner: One Enterprise Cloud, powered by Oracle.   /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• How to create Captcha in ASP.NET

  - by Samir R. Bhogayta

  1. Create one page with name "Captcha.aspx" 2. No any control require in this page 3. Go to Captcha.aspx.vb write the below code Protected Sub Page_Load(sender As Object, e As System.EventArgs) Handles Me.Load         'create object of Bitmap Class and set its width and height.         Dim objBMP As Bitmap = New Bitmap(180, 51)         'Create Graphics object and assign bitmap object to graphics' object.         Dim objGraphics As Graphics = Graphics.FromImage(objBMP)         objGraphics.Clear(Color.White)         objGraphics.TextRenderingHint = TextRenderingHint.AntiAlias         Dim objFont As Font = New Font("arial", 30, FontStyle.Bold)         'genetating random 6 digit random number         Dim randomStr As String = GeneratePassword()         'set this random number in session         Session.Add("randomStr", randomStr)         Session.Add("randomStrCountry", randomStr)         objGraphics.DrawString(randomStr, objFont, Brushes.Black, 2, 2)         Response.ContentType = "image/GIF"         objBMP.Save(Response.OutputStream, ImageFormat.Gif)         objFont.Dispose()         objGraphics.Dispose()         objBMP.Dispose()     End Sub     Public Function GeneratePassword() As String         ' Below code describes how to create random numbers.some of the digits and letters         ' are ommited because they look same like "i","o","1","0","I","O".         Dim allowedChars As String = "a,b,c,d,e,f,g,h,j,k,m,n,p,q,r,s,t,u,v,w,x,y,z,"         allowedChars += "A,B,C,D,E,F,G,H,J,K,L,M,N,P,Q,R,S,T,U,V,W,X,Y,Z,"         allowedChars += "2,3,4,5,6,7,8,9"         Dim sep() As Char = {","c}         Dim arr() As String = allowedChars.Split(sep)         Dim passwordString As String = ""         Dim temp As String         Dim rand As Random = New Random()         Dim i As Integer         For i = 0 To 5 - 1 Step i + 1             temp = arr(rand.Next(0, arr.Length))             passwordString += temp         Next         Return passwordString     End Function 4. Use this page in you aspx page like this img alt="" border="0" src="Captcha.aspx" style="cursor: move; height: 60px; width: 200px;" //                                   your textbox to insert code by user.

  Read the article

• Solaris 11.1 changes building of code past the point of __NORETURN

  - by alanc

  While Solaris 11.1 was under development, we started seeing some errors in the builds of the upstream X.Org git master sources, such as: "Display.c", line 65: Function has no return statement : x_io_error_handler "hostx.c", line 341: Function has no return statement : x_io_error_handler from functions that were defined to match a specific callback definition that declared them as returning an int if they did return, but these were calling exit() instead of returning so hadn't listed a return value. These had been generating warnings for years which we'd been ignoring, but X.Org has made enough progress in cleaning up code for compiler warnings and static analysis issues lately, that the community turned up the default error levels, including the gcc flag -Werror=return-type and the equivalent Solaris Studio cc flags -v -errwarn=E_FUNC_HAS_NO_RETURN_STMT, so now these became errors that stopped the build. Yet on Solaris, gcc built this code fine, while Studio errored out. Investigation showed this was due to the Solaris headers, which during Solaris 10 development added a number of annotations to the headers when gcc was being used for the amd64 kernel bringup before the Studio amd64 port was ready. Since Studio did not support the inline form of these annotations at the time, but instead used #pragma for them, the definitions were only present for gcc. To resolve this, I fixed both sides of the problem, so that it would work for building new X.Org sources on older Solaris releases or with older Studio compilers, as well as fixing the general problem before it broke more software building on Solaris. To the X.Org sources, I added the traditional Studio #pragma does_not_return to recognize that functions like exit() don't ever return, in patches such as this Xserver patch. Adding a dummy return statement was ruled out as that introduced unreachable code errors from compilers and analyzers that correctly realized you couldn't reach that code after a return statement. And on the Solaris 11.1 side, I updated the annotation definitions in <sys/ccompile.h> to enable for Studio 12.0 and later compilers the annotations already existing in a number of system headers for functions like exit() and abort(). If you look in that file you'll see the annotations we currently use, though the forms there haven't gone through review to become a Committed interface, so may change in the future. Actually getting this integrated into Solaris though took a bit more work than just editing one header file. Our ELF binary build comparison tool, wsdiff, actually showed a large number of differences in the resulting binaries due to the compiler using this information for branch prediction, code path analysis, and other possible optimizations, so after comparing enough of the disassembly output to be comfortable with the changes, we also made sure to get this in early enough in the release cycle so that it would get plenty of test exposure before the release. It also required updating quite a bit of code to avoid introducing new lint or compiler warnings or errors, and people building applications on top of Solaris 11.1 and later may need to make similar changes if they want to keep their build logs similarly clean. Previously, if you had a function that was declared with a non-void return type, lint and cc would warn if you didn't return a value, even if you called a function like exit() or panic() that ended execution. For instance: #include <stdlib.h> int callback(int status) { if (status == 0) return status; exit(status); } would previously require a never executed return 0; after the exit() to avoid lint warning "function falls off bottom without returning value". Now the compiler & lint will both issue "statement not reached" warnings for a return 0; after the final exit(), allowing (or in some cases, requiring) it to be removed. However, if there is no return statement anywhere in the function, lint will warn that you've declared a function returning a value that never does so, suggesting you can declare it as void. Unfortunately, if your function signature is required to match a certain form, such as in a callback, you not be able to do so, and will need to add a /* LINTED */ to the end of the function. If you need your code to build on both a newer and an older release, then you will either need to #ifdef these unreachable statements, or, to keep your sources common across releases, add to your sources the corresponding #pragma recognized by both current and older compiler versions, such as: #pragma does_not_return(exit) #pragma does_not_return(panic) Hopefully this little extra work is paid for by the compilers & code analyzers being able to better understand your code paths, giving you better optimizations and more accurate errors & warning messages.

  Read the article

• Database Partitioning and Multiple Data Source Considerations

  - by Jeffrey McDaniel

  With the release of P6 Reporting Database 3.0 partitioning was added as a feature to help with performance and data management.  Careful investigation of requirements should be conducting prior to installation to help improve overall performance throughout the lifecycle of the data warehouse, preventing future maintenance that would result in data loss. Before installation try to determine how many data sources and partitions will be required along with the ranges.  In P6 Reporting Database 3.0 any adjustments outside of defaults must be made in the scripts and changes will require new ETL runs for each data source.  Considerations: 1. Standard Edition or Enterprise Edition of Oracle Database.   If you aren't using Oracle Enterprise Edition Database; the partitioning feature is not available. Multiple Data sources are only supported on Enterprise Edition of Oracle   Database. 2. Number of Data source Ids for partitioning during configuration.   This setting will specify how many partitions will be allocated for tables containing data source information.  This setting requires some evaluation prior to installation as       there are repercussions if you don't estimate correctly.   For example, if you configured the software for only 2 data sources and the partition setting was set to 2, however along came a 3rd data source.  The necessary steps to  accommodate this change are as follows: a) By default, 3 partitions are configured in the Reporting Database scripts. Edit the create_star_tables_part.sql script located in <installation directory>\star\scripts   and search for partition.  You’ll see P1, P2, P3.  Add additional partitions and sub-partitions for P4 and so on. These will appear in several areas.  (See P6 Reporting Database 3.0 Installation and Configuration guide for more information on this and how to adjust partition ranges). b) Run starETL -r.  This will recreate each table with the new partition key.  The effect of this step is that all tables data will be lost except for history related tables.   c) Run starETL for each of the 3 data sources (with the data source # (starETL.bat "-s2" -as defined in P6 Reporting Database 3.0 Installation and Configuration guide) The best strategy for this setting is to overestimate based on possible growth.  If during implementation it is deemed that there are atleast 2 data sources with possibility for growth, it is a better idea to set this setting to 4 or 5, allowing room for the future and preventing a ‘start over’ scenario. 3. The Number of Partitions and the Number of Months per Partitions are not specific to multi-data source.  These settings work in accordance to a sub partition of larger tables with regard to time related data.  These settings are dataset specific for optimization.  The number of months per partition is self explanatory, optimally the smaller the partition, the better query performance so if the dataset has an extremely large number of spread/history records, a lower number of months is optimal.  Working in accordance with this setting is the number of partitions, this will determine how many "buckets" will be created per the number of months setting.  For example, if you kept the default for # of partitions of 3, and select 2 months for each partitions you would end up with: -1st partition, 2 months -2nd partition, 2 months -3rd partition, all the remaining records Therefore with records to this setting, it is important to analyze your source db spread ranges and history settings when determining the proper number of months per partition and number of partitions to optimize performance.  Also be aware the DBA will need to monitor when these partition ranges will fill up and when additional partitions will need to be added.  If you get to the final range partition and there are no additional range partitions all data will be included into the last partition. 

  Read the article

< Previous Page | 227 228 229 230 231 232 233 234 235 236 237 238  | Next Page >