Search Results

Search found 46406 results on 1857 pages for 'super tester test123'.

Page 231/1857 | < Previous Page | 227 228 229 230 231 232 233 234 235 236 237 238  | Next Page >

  • Cannot access certain URL on my wireless

    - by dehmann
    Problem: On my wireless network at home, there is one URL that I just cannot access with my browser: http://research.microsoft.com/ I have no problems with the Internet connection otherwise. But on that address I just get The connection was reset The connection to the server was reset while the page was loading. from Firefox. I am using a DSL modem (Westell) and Linksys wireless router (using DHCP). When I use my neighbor's wireless connection I can access the microsoft site without a problem. Additional technical details: But with my connection, here is what I get from nslookup. It is weird: It first cannot find the address, but after I look up another address it can find it: $ nslookup research.microsoft.com ;; connection timed out; no servers could be reached $ nslookup google.com Non-authoritative answer: Name: google.com Address: 72.14.204.104 Name: google.com Address: 72.14.204.147 Name: google.com Address: 72.14.204.99 Name: google.com Address: 72.14.204.103 $ nslookup research.microsoft.com Non-authoritative answer: Name: research.microsoft.com Address: 131.107.65.14 But even after nslookup finds it Firefox still cannot access it. Here is what traceroute says: $ traceroute http://research.microsoft.com/ traceroute: Warning: http://research.microsoft.com/ has multiple addresses; using 8.15.7.117 traceroute to http://research.microsoft.com/ (8.15.7.117), 64 hops max, 40 byte packets 1 dslrouter.westell.com (1XX.XXX.X.X) 4.515 ms 2.760 ms 3.072 ms 2 * * * Traceroute just to the IP: $ traceroute 131.107.65.14 traceroute to 131.107.65.14 (131.107.65.14), 64 hops max, 40 byte packets 1 dslrouter.westell.com (1XX.XXX.X.X) 11.912 ms 2.684 ms 2.808 ms 2 * * * Comparison: Traceroute to google.com IP: $ traceroute 72.14.204.99 traceroute to 72.14.204.99 (72.14.204.99), 64 hops max, 40 byte packets 1 dslrouter.westell.com (1XX.XXX.X.X) 6.428 ms 6.981 ms 117.099 ms 2 * * * Any comments / help?

    Read the article

  • Is TrueCrypt truly safe?

    - by Alfred
    Hi. I have been using TrueCrypt for a long time now. However, someone pointed me to a link that described the problems with the license. IANAL and so it really didn't make much sense to me, however I wanted my encryption software to be open source - not because I could hack into it but because I could trust it. Some of the issues with it I have noticed: There is no VCS for the source code. Is this OK? There are no change logs. The forums are a bad place to be. They ban even if you ask a genuine question. Who really owns TrueCrypt? There were some reports of tinkering with the md5 checksums. To be honest, the only reason why I used TrueCrypt was because it was open source. But however, somethings are just not right. Has anyone ever validated the security of TrueCrypt? Should I really be worried? Yes I am paranoid; if I use an encryption software, I trust it with all my life. If all my concerns are genuine, is there any other open source alternative to TrueCrypt?

    Read the article

  • The visual effects in Windows 7 turns off after reboot.

    - by Jagannath
    I have Windows 7 64-bit Professional on my PC. When using English language, the visual effects are turned on. When I use Telugu LIP (India), the visual effects are turned off every time I reboot my PC. When I say visual effects, I don't mean the aero effects. The maximize and minimize effects are not felt. The effects don't show up though the check boxes are checked. Find the image showing the check boxes are checked but the effects not being showed up p. UPDATE: I recreated the account and now the effects are restored properly. UPDATE: Yes it is. This is a standard account. The surprising thing is,the check boxes are checked but still no animations. Once I make the apply button enable, the animations show up again.

    Read the article

  • Use synergy with KVM

    - by Mr. Man
    I am using synergy on a Linux Mint server with a Mac as the client. I also have a physical KVM switch. The problem I have is that when ever I switch the physical KVM to my Mac, synergy stops working as in the keyboard and mouse don't work with the Mac. Thanks in advance!

    Read the article

  • Drive writing problem [closed]

    - by Aditya
    Ive a fat32 drive...when i save a file on it on linux . open it in windows the file is not visible...the space occupied by that file is also not accounted for...the vice versa is also true...any idea why??

    Read the article

  • Adding multiple gradients to object in Adobe Illustrator

    - by Vass
    Hi, I have an object which is a path (a nose to be specific). Now I want both a linear gradient and a radial gradient to be added to the object. So these must be separate gradient objects I guess, and I can't find a way to add multiple separate gradients to a complete path so do I duplicate the object and then apply a new gradient to each object? And what would the layer transparency features look like? Would the 'normal' overlay of the layers work? I am afraid of multiple shadows creating double dark regions, but maybe that is as its supposed to be if you think in terms of classical art and draw shadows in terms of each light obstruction.

    Read the article

  • WAMP Server vs LAMP Server

    - by Rob A
    Hi All, Just wondering, I want to set up a basic web server at home. I run Windows (XP on the machine to be a server), however I also have Ubuntu on hand if I need to run that. Basically I was wondering if there are any large difference between WAMP servers and LAMP servers? I know the run virtually the same software, but does one perform better than the other? Are there hidden benefits of running it in Ubuntu instead of XP, or the other way around? I know its a basic question, but I havent done anything with Ubuntu, and Ive done about the same amount with web server-ing. Thanks!

    Read the article

  • Alternatives to Windows-builtin checkdisk utility for NTFS?

    - by t-a-w
    For some reason Windows 7's checkdisk freezes and doesn't move its progress bar forward for over an hour, while the disk is still supposedly active. Now it's possible that if I left it overnight it would finally figure out how to progress, but are there any other programs with similar functionality I could use instead?

    Read the article

  • Running hardware with only 32bit drivers in 64bit windows

    - by Howard
    Recently we had to upgrade a system to handle added HD IP cameras. This upgrade involved an entirely new computer build with the exception of a rather pricey Geovision DVR (PCI/GV1480 series). Apparently while these cards do support Windows 7, they do not support Windows 7 x64. I'm stuck between a rock and a hard place here trying to figure out how we can remedy this, is there a virtualization solution that will allow devices with driver issues to passthru to the Guest OS? I was thinking XPMode may work for this solution however I am unsure if it runs 32bit or 64bit and if it'll allow driver-issue devices to pass to it. Any help would be greatly appreciated, Best Regards, Howard

    Read the article

  • ubuntu automount: only mounting drives as root?

    - by glisignoli
    I'm sharing the /mount dir with smb so users on my network can access use drives added to my linux box. Users are able to read files but not write, modify or delete files or directories. I'm using ubuntu 10.04 server edition with halevt installed for usb auto mounting. Afaik halevt is automounting the drives to /media/ but the drives are showing up as: drwxrwxr-x 1 root root 20480 2010-12-29 20:40 disk drwxrwxr-x 1 root root 24576 2010-12-21 17:20 Sparta mount gives me: /dev/sda1 on /boot type ext2 (rw) /dev/sdb1 on /media/disk type fuseblk (rw,nosuid,nodev,sync,allow_other,blksize=4096,default_permissions) /dev/sdc1 on /media/Sparta type fuseblk (rw,nosuid,nodev,sync,allow_other,blksize=4096,default_permissions) When I umount the drives, the folders /media/disk and /media/Sparta are both removed. I tried changing the permissions with chown to nobody:nogroup but it doesn't work (which I assume is because they are ntfs drives).

    Read the article

  • Can't manage iPod from linux anymore

    - by kemp
    I used to be able to see and manage my iPod with different softwares: Amarok, Rhythmbox, GTKPod. The device is a nano 1st generation 4gb. Currently it mounts regularly and can be accessed from the file system, but I get this in dmesg: [ 1547.617891] scsi 11:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0 [ 1547.619103] sd 11:0:0:0: Attached scsi generic sg2 type 0 [ 1547.620478] sd 11:0:0:0: [sdb] Adjusting the sector count from its reported value: 7999488 [ 1547.620494] sd 11:0:0:0: [sdb] 7999487 512-byte hardware sectors: (4.09 GB/3.81 GiB) [ 1547.621718] sd 11:0:0:0: [sdb] Write Protect is off [ 1547.621726] sd 11:0:0:0: [sdb] Mode Sense: 68 00 00 08 [ 1547.621732] sd 11:0:0:0: [sdb] Assuming drive cache: write through [ 1547.623591] sd 11:0:0:0: [sdb] Adjusting the sector count from its reported value: 7999488 [ 1547.624993] sd 11:0:0:0: [sdb] Assuming drive cache: write through [ 1547.625003] sdb: sdb1 sdb2 [ 1547.629686] sd 11:0:0:0: [sdb] Attached SCSI removable disk [ 1548.084026] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 1548.369502] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 1548.504358] FAT: invalid media value (0x2f) [ 1548.504363] VFS: Can't find a valid FAT filesystem on dev sdb1. [ 1548.945173] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 1548.945179] FAT: invalid media value (0x2f) [ 1548.945182] VFS: Can't find a valid FAT filesystem on dev sdb1. [ 1610.092886] usb 2-6: USB disconnect, address 9 The only application that can access it (partially) is Rhythmbox. I say partially because I can transfer files to the iPod but can't remove or modify them. Also one transfer didn't finish and only 9 out of 16 songs were delivered to the device. All other softwares I tried (GTKPod, Amarok, Songbird) don't even detect it. What can I do to troubleshoot this? EDIT: # fdisk -l /dev/sdb Disk /dev/sdb: 4095 MB, 4095737344 bytes 241 heads, 62 sectors/track, 535 cylinders Units = cylinders of 14942 * 512 = 7650304 bytes Disk identifier: 0x20202020 Device Boot Start End Blocks Id System /dev/sdb1 1 11 80293+ 0 Empty Partition 1 has different physical/logical beginnings (non-Linux?): phys=(0, 1, 1) logical=(0, 1, 2) Partition 1 has different physical/logical endings: phys=(9, 254, 63) logical=(10, 181, 8) Partition 1 does not end on cylinder boundary. /dev/sdb2 11 536 3919415+ b W95 FAT32 Partition 2 has different physical/logical beginnings (non-Linux?): phys=(10, 0, 7) logical=(10, 181, 15) Partition 2 has different physical/logical endings: phys=(497, 240, 62) logical=(535, 88, 61) EDIT2: The "before" state is hard to tell, it was a lot of updates ago. Haven't been using my iPod for a while so I can't say when exactly it stopped working. I'm sure Amarok was still at version 1.X but can't remember when it was. My current system is debian testing fully updated. NOTE: just noticed that if I mount the device manually instead of letting nautilus automount it, I can see it again on GTKPod but still not on Banshee AND it's vanished from Rhythmbox...

    Read the article

  • Folder to save images with AutoHotkey

    - by horiageorg
    When I try to save an image from a Web page with a program written in AutoHotkey,it always chooses the last folder I had chosen manually to save Web images. This is the script (assuming I'm on Web page and I want to save the images of a series of Web pages): FileSelectFolder, OutputVar, , 3 if OutputVar = MsgBox, You didn't select a folder. else MsgBox, You selected folder "%OutputVar%". Sleep 10000 Loop 25 { MouseClick, left, 185, 250 Sleep 5000 Send {ENTER} Sleep 5000 MouseClick, left, 75, 397 Sleep 5000 }

    Read the article

  • Why not open a PDF file in the browser but first save it to the harddisk?

    - by Lernkurve
    Question Is it correct that saving a PDF to the harddisk first, and then opening it from there with some PDF reader (not the browser) is safer than opening it directly with the browser plugin? My current understanding I know that the PDF browser plugin might have a security leak and a manipulated PDF file might exploit it and get access to the user's computer. I recently heard that saving the PDF file frist and opening it then was safer. I don't understand why that should be safer. Can anyone explain? My logic would suggest that a manipulated file started from the harddisk can just as well exploit a security leak, say for instance, of Adobe Acrobat Reader.

    Read the article

  • CalDAV : request error problem

    - by Louis W
    We have an xserve which hosts our internal calendars through CalDAV. Personally have 4 calendars from the server set to show in my iCal. Frequently throughout the day at random moments I will get the below error. If I hit ignore, it will just continue to work without any issues. This is more of an annoyance then anything (the dock icon jumping all the time). I have full permission to read anything, so it is not an actual permission issue. Anyone know what might be the issue? Request Error Access to account "FOO" is not permitted. The server has responded: "HTTP/1.1 403 Forbidden" to operation CalDAVAccountRefreshQueueableOperation

    Read the article

  • Text-Editing program : muti-search-replace/multi-regex?

    - by rlb.usa
    I have a long and arduous text file, and I need to do lots and lots of the same search-replaces on it inside of selections. Is there a text editing program where I can do multiple find/replace (or regex) at one time? That is, I want to : (select text) - (do-find-replace-set-A) - (do other stuff) - (repeat) Instead of : (select text) - (f&r #1, f&r #2, f&r #3 ... ) - (do other stuff) - (repeat) I have textpad, but it's macro's won't handle find/replace.

    Read the article

  • nginx start failing, says error.log doesn't exist

    - by sososo
    I structured my sites like: /home/www/domain.com/public,private, log, backup In the log folder, I created a blank error.log and access.log. My nginx file in sites-available for the domain looks like: server { access_log /home/www/domain1.com/log/access.log; error_log /home/www/domain1.com/log/error.log; } Trying to start nginx it says: starting nginx: the config file /etc/nginx/nginx/conf syntax is ok [emrg] open() ".../access.log" failed (2: no such file or directory) Is this a permission issue?

    Read the article

  • How to unlock files using handle.exe and process name?

    - by Radek
    I tried Unlocker 1.9.1 but it doesn't work correctly for me on Windows7 (worked ok on Windows XP) and also I tried LockHunter 2.0.2.103 x64 and reported a bug but .... LockHunter actually unlocks the file from GUI but not from command line. So I want to use handle.exe by SysInternals to unlock one file "TestPro.log". I know the absolut path if it helps. I can list and all processes that locked the file by executing C:\Windows\system32>c:\edutester\progs\handle testpro.log java.exe pid: 2120 type: File 338: C:\Users\Public\TestPro \TestPro Automation Framework\Logs\TestPro.log java.exe pid: 1004 type: File 934: C:\Users\Public\TestPro \TestPro Automation Framework\Logs\TestPro.log What I need to know how to unlock the file using above info from command line automatically. No user intervention is possible. Windows 7 64bit Microsoft Windows [Version 6.1.7601]

    Read the article

  • ASUS N56VZ-S4209P Screen saver, Screen dimming,sleep/hibernation mode not working according to power management settings

    - by Alto Roos
    I have a problem with my ASUS N56VZ-S4209P(Win8, I7-3630QM) laptop. If I use the fn+f7 command to turn off the screen it turns on by itself after a few seconds (the time varies between 1-10 seconds). In addition to this my screensaver doesn't activate at all and the laptop doesn't dim its screen after X minutes or goes into sleep/hibernation mode as specified in the power options when plugged in or on battery. As far as my knowledge goes it's not caused by the mouse or track pad at all since I can unplug my mouse and disable the track pad but the problem persist. I presume this is caused by the same problem? Does anyone know of a fix for this problem? It would be greatly appreciated. . . . I seem to have found a solution to the problem related to the screen that turns itself on again. The Power4Gear application has a setting which enables you to turn a "Presentation mode" "On" and "Off", if that setting is "Off" then it doesn't turn the screen on without any human interaction. Thus that part of the problem is fixed.

    Read the article

  • How do I tell sudo to write files with a umask of 0022?

    - by mipadi
    I recently upgrading to Snow Leopard. I have noticed that some files written by MacPorts are installed with the wrong permission -- they are written with a umask of 0077. I think I have narrowed down the problem: The port command is invoked via sudo. My .bashrc file specifies a umask of 0077. On older versions of OS X (10.5 and below), sudo used the umask of the root user (which was 0022); however, now it uses my umask of 0077. Is there anyway to have sudo use the old behavior? Right now, it's kind of annoying because I have to use sudo to run simple commands like port installed, port outdated, etc. (The problem is described in more detail in this MacPorts ticket.) Edit I discovered the umask option for sudo, and in /etc/sudoers I added the following line: Defaults umask=0022 However, this did not function as desired, because the real umask used by sudo is the union of the user mask with this default mask.

    Read the article

  • Package visible in Synaptic but not in aptitude?

    - by sleepycat
    I can see libfreeimage3-dev in synaptic and have installed it from there, but what is it that I can't see it from the command line? I tried sudo aptitude update... mike@sleepycat:~$ sudo aptitude search '~n.*freeimage3.*' i libfreeimage3 - Support library for graphics image formats p libfreeimage3-dbg - Support library for graphics image formats Any ideas?

    Read the article

  • Direct URL to a Google docs revision

    - by user12889
    I have a Google doc document. Using Edit-File-See Revision History I can see older revisions and go to them. I want to give some-one a URL which points directly to a specific revision of my document which is not the current one. How do I do this? (Note: The link from the revision list does not work outside that list, if you enter it in the address bar you just get the list, not the document; the URL in the address bar when you load the older revision does not work either)

    Read the article

  • Mac Port error installing gsoap

    - by Kevin
    Hi All, I have installed Mac Ports V1.8.1 no worries. I ran sudo port -v selfupdate no worries. I ran sudo port install gsoap And get the following error message. --- Computing dependencies for gsoap --- Fetching gsoap --- Attempting to fetch gsoap_2.7.13.tar.gz from http://optusnet.dl.sourceforge.net/gsoap2 --- Verifying checksum(s) for gsoap --- Extracting gsoap --- Applying patches to gsoap --- Configuring gsoap Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_gsoap/work/gsoap-2.7" && ./configure --prefix=/opt/local --enable-samples " returned error 77 Command output: checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... no checking build system type... i386-apple-darwin10.2.0 checking host system type... i386-apple-darwin10.2.0 checking whether make sets $(MAKE)... (cached) no checking for C++ compiler default output file name... configure: error: C++ compiler cannot create executables See `config.log' for more details. Error: Status 1 encountered during processing. Any ideas as to why it is failing. Regards Kevin

    Read the article

< Previous Page | 227 228 229 230 231 232 233 234 235 236 237 238  | Next Page >