Search Results

Search found 9259 results on 371 pages for 'bing maps controls'.

Page 232/371 | < Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >

• Add a small RAID card? Will it help overall stability and performance of my nine hard drives?

  - by Ray

  Hi, Will I get any extra genuine added performance and RAID stability if I insert a basic RAID card into a PCI-E x1 slot? I am considering the Adaptec 1220SA - 2 port SATA , pci-express (1x) , raid 0/1. Ok it only supports two SATA drives. Purpose is to help support the eight internal hard drives (1TB each), a DVD drive and an external e-SATA connected 2TB hard drive - by dealing with two of the internal hard drives. My current configuration of eight internal 1TB Barracuda (7200.12) SATA hard drives, one external 2TB SATA Western Digital Green Drive (e-SATA) and one DVD drive can already be supported by the Intel P55 & JMicron controllers on the ASUS motherboard : the Intel P55 (controls six HDD; configured as three x RAID 1), and the JMicron (controls two HDD as one RAID 1, as well as the DVD drive and the external SATA drive via the motherboard's e-SATA port (controlled by the JMicron)). Bigger picture details : I have an ASUS motherboard designed for the LGA1156 type processor and it includes the Intel P55 Express Chipset and JMicron. I am using the Intel Core i7-870 processor, and have 8GB DDR3 (1333) memory (four x 2GB Corsair DIMMs). Enough overall power. The power supply is more than sufficicient for the system. Corsair AX850. The system will never need the full 850 watts (future : second graphics card). The RAID card would provide hardware RAID 1 for two of the eight intrnal drives. It would either reduce the load on : the Intel P55 firmware RAID support, or replace the JMicron controller's RAID 1 set. I am busy installing the above configuration using Windows 7 Ultimate 64-bit as the OS. The RAID card is a last minute addition to the plan. Is it worth spending the extra R700 - R900 on the Adaptec 1220SA, or equivalent RAID card? I cannot afford to spend yet another R2000 - R3000 on a RAID card that would support many SATA2 hard drives, with a better RAID, example the RAID 5. My Issue & assumption : I am trusting that the Intel P55 chipset can properly handle six drives, configured as three * RAID 1. I am assuming that the JMicron can handle, using its RED SATA ports, one RAID-1 (two HDDs). The DVD drive connects to the JMicron optical SATA port 1 (white port 1). White port 2 is not used. The e-SATA connection is from the JMicron straight to, and through the motherboard - to an on-board (rear panel) e-SATA port. Am I being a little hopeful in only using the on-board Intel P55 and the JMicron? Is it a waste of money to install a RAID card that handles two SATA2 drives? OR Is it wisdom to take the pressure a little off the Intel P55? Obviously I am interested in data security, hence RAID 1, not RAID Zero. RAID 5 would be nice. The CPU, Intel Core i7-870 will provide the clout. Context to nine drives : I am using virtualisation with Windows 7 Ultimate. Bootable VMs. The operating system gets a mirror. Loaded apps gets a mirror. The current design data is kept in another mirror and Another mirror is back-up one and / or VM territory. Then the external 2TB drive (via e-SATA) is the next layer of data security and then finally, I use off-site data security. Thanks.

  Read the article

• Can you play Halo 2 and Halo 3 on an Xbox360 Arcade?

  - by Jeremy Rudd

  I'm looking at purchasing a Xbox360 because I've wanted to catch up with the Halo trilogy. Does the cheap Arcade edition console support Halo 2 and Halo 3? Would I be able to save my game progress in single player? Would I be able to play online in typical maps? Would I be able to play games using the DVD drive or do I have to download everything? Does the tiny HDD hurt even if I don't download any games, trailers or music? Are there any other differences in comparison to the Xbox360 Pro? I have a regular TV that uses the composite cable, so I don't need the HDTV support in the Pro edition.

  Read the article

• Ubuntu - Create a link to a specified directory so I can easily change to that directory

  - by Denby

  Is it possible to create a symlink to a directory, like /var/lib/tomcat6/webapps/MyWar that I can access from everywhere? I want to be able to say cd myapp from anywhere in the directory tree and go to that directory. Is it only possible in the directory where I create the symlink? Do I have to update my ~/.bashrc file to include an alias like: alias myapp="cd /var/lib/tomcat6/webapps/MyWar" and then just type myapp from anywhere? What is the best way to handle this situation so I don't always have to type in the long directory? I also want to be able to use that parameter in say a copy command, so the alias wouldn't help in that situation. Hopefully I can do something similar where ~ maps to the home directory in any command.

  Read the article

• Check username password combination in Windows

  - by mwolfe02

  I have an autohotkey script that maps multiple network drives using a series of net use commands. I enter my password once into an autohotkey inputbox, then run all of the net use commands with the entered password. This works great as long as I enter the correct password. If I mistype my password it runs all the net use commands with an incorrect password and my account ends up locked out. Aside from catching the error code/output from the net use command, is there some other way (through Autohotkey/Windows command-line) to verify the username/password combo is correct before I run it multiple times?

  Read the article

• Logon script in Active Directory

  - by tareq838

  I am having a weird intermittent issue for only some users. I have a logon script that maps shared drives and issues a diisclaimer everytime the user logs on to a machine. The problem lately is that the logon script will not run for the user so we get a help desk call. When one of the help desk techs log on to the machine the script then comes up. The tech then logs off and the user will log back in and they will get the logon script. I am at wits end with this issue. Any help would be appreciated. It has happend on both Windows XP and Vista 64.

  Read the article

• Transferring Microsoft CRM data

  - by notCRMguru

  My boss has asked me to transfer data from the current Microsoft CRM 4.0 server to a new one. I myself haven't used CRM at all. I've done some research and come across various ways to import data from different sources. These methods include using CSV files and Data Maps. This seems very cumbersome and unnecessary since the data is already in a CRM. Would someone please direct to some guides for full/partial data transferral from this current CRM to a new one? Thanks

  Read the article

• Can I force NFS automounts to use NFSv3?

  - by Steve

  I have a linux server that is exporting NFSv4 as well as NFSv3. I have a Fedora14 client that is defaulting to NFSv4 when automounting NFS shares off of the linux server, and it seems to be causing some problems. All my other linux clients on the network are mounting via NFSv3 without issue, so is there a way I can tell automount to mount the share via v3? I am pulling my automount maps via LDAP, with an entry in my /etc/auto.master file like so: +auto_master, so I assume it's a bit different than listing options with a regular automount map? (.i.e. /home --nfsvers=3 fileserver:/DATA)

  Read the article

• how to check in a bash script where the shell is run from

  - by nass

  I am fuzzy about how to set a command in a script to be run only when the shell is running within an X session. basically, in ~/.bashrc I set my keyboard maps as setxkbmap -layout 'us,gr' -variant 'altgr-intl,extended' -option grp:alt_shift_toggle If I am connecting through putty , or otherwise, and i just open a command prompt window, I DONT want this command to run. If on the other hand, i have an X session running (locally or remotely) I want this command to run. how can I do this checking in a bash script? Is there a bash environment variable I can be looking at? some other way? Thank you for your help

  Read the article

• Apache: Setting up a reverse proxy configuration with SSL with url rewriting

  - by user1172468

  There is a host: secure.foo.com that exposes a webservice using https I want to create a reverse proxy using Apache that maps a local http port on a server internal.bar.com to the https service exposed by secure.foo.com Since it a web service I need to map all urls so that a path: https://secure.foo.com/some/path/123 is accessible by going to: http://internal.bar.com/some/path/123 Thanks. I've gotten this far: <VirtualHost *:80> ServerName gnip.measr.com SSLProxyEngine On ProxyPass / https://internal.bar.com/ </VirtualHost> I think this is working except for the url rewriting. Some resources I've found on this are: Setting up a complex Apache reverse proxy Apache as reverse proxy for https server

  Read the article

• Is there anyway to configure Google account for Windows 8 Sync?

  - by William.Ebe

  Recently upgraded to Windows 8. The problem is a lot of Sync features requires Microsoft account to linked. Even though I have one, I don't want to spare one for Sync purpose. Additionally, Google-Chrome's sync feature is absolutely charming. So I prefer Google for storing my data. So, 1) Is there anyway to replace Microsoft Sync with other accounts by patching or modifying any byte? 2) I want to replace Maps, Weather, and all possible apps with Google. I've see Mail can be done. What are the all other possible Metro apps?

  Read the article

• Why does DNS work the way it does?

  - by sabof

  This is a Canonical Question about DNS (Domain Name Service). If my understanding of the DNS system is correct, the .com registry holds a table that maps domains (www.example.com) to DNS servers. What is the advantage? Why not map directly to an IP address? If the only record that needs to change when I am configuring a DNS server to point to a different IP address, is located at the DNS server, why isn't the process instant? If the only reason for the delay are DNS caches, is it possible to bypass them, so I can see what is happening in real time?

  Read the article

• Das keyboard boot camp

  - by chuck taylor

  So I recently started using a Das keyboard ultimate with my mac and after installing the key re-mapping, it basically works ok. I have a couple of issues with the set up involving boot camp. When I start up the computer, which key maps to option in order to let me pick which operating system to boot into? I think the bios is detecting the keys along the bottom as alt or something like that and I am not sure what to do here. In windows 7, the " and @ keys are switched. How do I get windows to remap this back to the US english settings? Thanks for any help you can provide.

  Read the article

• Keyboard layout for mathematical/Greek symbols

  - by David

  I've been wondering about this for a long time but never thought to ask: I do a lot of scientific work so there are many times it would be really handy to be able to type mathematical symbols or Greek letters which, for the most part, aren't part of the ASCII character set. Like "8 µ ? s t ? ? … v ? = = ±" and so on. Is there a keyboard layout (for Linux) that maps simple key combinations to these kinds of characters? (Assuming all the encoding and font issues are worked out properly) I know I could create one myself but it'd be a lot easier if someone's already done the work, or at least if there's a partial solution I could modify.

  Read the article

• iis 7.0 output caching

  - by george9170

  My company is serving up deep-zoom maps. We have 100'000s jpg images being served up and was wondering if output caching would be the way to go. Our problem is latency on serving the images. I was wondering if i output caching would indeed improve latency and a general explanation about output caching. I have visisted http://blogs.iis.net/bills/archive/2007/05/02/iis7-output-caching-for-dynamic-content-dramatically-speed-up-your-asp-and-php-applications.aspx and was wondering if there are any other good sites to look at. thank you very much.

  Read the article

• Are there videocamera which geotag individual frames?

  - by Grzegorz Adam Hankiewicz

  I'm looking for a way to record live video with the specific requirement of having each frame georeferenced with GPS. Right now I'm using a normal video camera with a PDA+GPS that records the position, but it's difficult to sync both of these plus sometimes I've forgotten to turn the PDA+GPS or it has failed for some reason and all my video has been useless. Using google I found that about two years ago a company named Seero produced such video cameras and software, but apparently the domain doesn't exist any more and I only find references of other pages mentioning it. Does somebody know of any other product? I need to record this video in HD and have some way to export to Google Maps or other GIS software the positions of the frames in a way that I can click on the map and see what was being recorded in the video at that point. The precission of the GPS tracking is good enough as one position per second, intermediate frames of the video stream can be interpolated.

  Read the article

• Screen flickers after resuming from hibernate with Intel GMA 3600 (Acer D270 with Intel N2600)

  - by Cameron

  Fresh system install, with correct display driver from Intel (8.14.8.1065). Clicking "Update driver" merely results in a message saying the driver was already up-to-date. After resuming from hibernate the entire screen flickers. This is especially noticeable while using IE9 (which has hardware acceleration enabled by default) on Google maps, in particular while typing in an address in the map search field (the flickering is much worse under these circumstances). Note that sleep worked fine, only hibernate causes this issue. Restarting "fixes" the problem temporarily until the next hibernate-resume. Aero is enabled. This is on Windows 7 (Pro) 32-bit, on an Acer Aspire One D270-1998, with the Intel N2600 (which has the Intel GMA 3600 built-in).

  Read the article

• What is AddType application/x-httpd-php-source

  - by egor

  I have the apache2.0, PHP5.2.4 and the directive in the httpd.conf: AddType application/x-httpd-php-source .php .php3 .php4 .php5 .php6 AddType directive is used to maps the given filename extensions onto the specified content type. This is the only meaning of this directive. But why does this method switch off PHP handler, that assigned .php extensions, and I can view source code of scripts in my browser? And another: AddType application/x-httpd-php5 .php Why does this method switch on PHP handler? This simply must send header "Content-Type: application/x-httpd-php5" to my browser and this must be only meaning of directive AddType from mod_mime. I'm confused. Thanks for your replies.

  Read the article

• Command line: Map network drive

  - by Seb Nilsson

  How do I write a command line in a .bat or .cmd that maps a network drive? I want the script to first check if the drive-letter is mapped, and if it is delete it and then map the drive. I only have the mapping-command right now. Please help me fill in the blanks: REM Check if drive exists, if it does, delete it @echo off net use q: /persistent:yes \\localhost\C$\MyFolder pause Are there any of the parameters wrong? Any that should be added?

  Read the article

• How do I force specific permissions for new files/folders on Linux file server?

  - by humble_coder

  I'm having an issue with my install of Ubuntu 9.10 (file server) and its samba permissions. Logging in and reading works fine. However, creation of new directories by users restricts access for other users. For instance, if Bob (Windows user who maps the drive) creates a folder in the directory, Jane (Mac user that simply smb mounts) can read from it, but can't write to it -- and vice versa. I then must go CHMOD 777 the directory for everyone to be happy. I've tried editing the "create/directory mask", and "force" options in the smb.conf file but this doesn't seem to help. I'm about to resort to CRONTABing a recursive chmod routine, although I'm sure this isn't the fix. How do I get all new items to always be 777? Does anyone have any suggestions to fix this ever-occurring situation? Best

  Read the article

• What can cause peaks in pagetables in /proc/meminfo ?

  - by Fuzzy76

  I have a gameserver running Debian Lenny on a VPS host. Even when experiencing a fairly low load, the players start experiencing major lag (ping times rise from 50 ms to 150-500 ms) in bursts of 3 - 10 seconds. I have installed Munin server monitoring, but when looking at the graphs it looks like the server has plenty of CPU, RAM and bandwidth available. The only weird thing I noticed is some peaks in the memory graph attributed to "page_tables" which maps to PageTables in /proc/meminfo but I can't find any good information on what this might mean. Any ideas what might be causing this? If you need any more graps, just let me know. The interrupts/second count is at roughly 400-600 during this period (nearly all from eth0). The drop in committed was caused by me trying to lower the allocated memory for the server from 512MB to 256MB, but that didn't seem to help.

  Read the article

• Add separate domain name to Wordpress admin area with htaccess

  - by Marc

  I have a Wordpress installation in a seperate folder on my server (meaning it is not in the root folder). I have a htaccess rewrite rule that maps Domain A to folder A. Inside folder A is the Wordpress admin folder, let's call it folder A.B. I tried mapping Domain B to folder A.B., but I can't get it to work properly. When you log in to Wordpress via /admin, you get redirected to /wp-login.php (so from folder A.B. to folder A), maybe that is where I get into trouble. So what I would like to do is this: Domain A folder A Domain B folder A.B Note that this is not for security purposes, I just like the idea of www.domainb.com instead of www.domaina.com/wp-admin. Can this be done with Wordpress?

  Read the article

• Programmatically query route planner for travel time/distance?

  - by Rich

  Hi I would like to achieve something whereby I have a spreadsheet such that the columns are: Column A - place name Column B - place name Column C - distance by road between places in columns A and B Column D - travel time by road between places in columns A and B I thought it might be possible using Google Docs' spreadsheet and its 'Google' functions, but I've not found any that might do the trick. In the end I could knock up an app to do it using the Google Maps API but would rather avoid it if I can. Thanks in advance for any suggestions. Rich

  Read the article

• How to tell httpd to preserve the proxied error message?

  - by ZNK - M

  I have an httpd server proxying the requests to 2 different tomcat servers. One of my server handles the authentication and returns a specific http error code 521 when the user already have a running session. My issue is httpd automatically maps this 521 error code to a 500 (internal server error) and then my client can not handle it properly. I have tried to disable ProxyErrorOverride, to remove the /error/HTTP_INTERNAL_SERVER_ERROR.html.var but it does not changes anything. How can I ask httpd to not change anything to the proxied message? <IfModule proxy_module> ProxyPass /context1 http://127.0.0.1:8001/context1 ProxyPass /context2 http://127.0.0.1:8002/context2 ProxyPreserveHost Off ProxyErrorOverride Off </IfModule> Thanks in advance httpd 2.2.22 (Win32) mod_ssl tomcat 7.25 windows 7 64-bits

  Read the article

• Forward requests to IIS Application/Folder to Apache server on another port

  - by TheGwa

  I have found many questions and answers for ways of doing this using asapi filters or ARR and URL Rewrite, but none are clear and concise and I am sure many people have this issue. I am looking for a best practice step by step solution to the following scenario: I have a development server accessible externally via a specific port for testing. Eg. rnd.domain.com:8888. So there is one port in and out of this machine accessible to the world. On this server I have a number of Apache or other servers using specific ports such as 8080. IIS is bound to port 80 locally as well as 8888 to get external requests and works perfectly. I would like to use an application (folder) in IIS such as rnd.domain.com:8888/mapserver to map to the local apache server in both directions. The same solution must apply in production where the domain is mapped to port 80. eg. production.domain.com/mapserver maps to 8080 on production server

  Read the article

• free Raw-File Converter/Editor

  - by RCIX

  I have RAW files output by a program with a specific set of properties (Photoshop RAW, 16 bits, IBM PC byte order, no header, 1 non-interleaved channel, variable sizes like 257X257 or 129X513); does anyone know of a free tool that will allow me to convert to and from this format, and possibly do basic editing (selection, copy/paste, rotation of selection)? I've tried Picasa, XNView, and Paint Shop Pro 7 and none of them work properly. The closest i get is Paint Shop Pro which will at least make a serviceable attempt to open these files but i can't set all of the proper settings. XNView just might be able to edit it if i can figure out how to change the open settings for a particular raw file. So my questions at current are: how do i tell XNView to open a raw file a particular way? Failing that, is there any free tool that can open Photoshop-RAW files with the above settings (that's not photoshop)? If it helps, i'm trying to import/export/edit hieghtmap data for maps for Supreme Commander.

  Read the article

< Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >